China National Standards
China SJ Standards Search System  
  •  China "SJ" Standards List:
  • Standard  Code Standard English Title Standard Class Order
    SJ 2986.1-1988 Combined dies--Drawing plate

    China Electronics - SJ Standards

    SJ 3110-1988 Cold press dies--Backing plate for longitudinal feeding of I-type fixed guide plate

    China Electronics - SJ Standards

    SJ 3111-1988 Cold press dies--Retaining plate for longitudinal feeding of I-type fixed guide plate

    China Electronics - SJ Standards

    SJ 2982.5-1988 Combined dies--Rectangular bed plate

    China Electronics - SJ Standards

    SJ 3020.5-1988 Combined dies--Stripper ring

    China Electronics - SJ Standards

    SJ 3022.1-1988 Combined dies--Stripping bushes

    China Electronics - SJ Standards

    SJ 3108-1988 Cold press dies--Guide plate for four guide pillars of spring guide stripper

    China Electronics - SJ Standards

    SJ 2968-1988 Generic specification for surface acoustic wave (SAW) filters for use in electronic equipment

    China Electronics - SJ Standards

    SJ 2973-1988 LC high-pass filters for TV tuners

    China Electronics - SJ Standards

    SJ 2981.1-1988 Combined dies--Square bed plate

    China Electronics - SJ Standards

    SJ 3095-1988 Technical specification of cold press die sets

    China Electronics - SJ Standards

    SJ 2982.1-1988 Combined dies--Square bed plate

    China Electronics - SJ Standards

    SJ 3059.2-1988 General die sets for blanking die--Bushing plate

    China Electronics - SJ Standards

    SJ 3015.1-1988 Combined dies--Guide plate (left side)

    China Electronics - SJ Standards

    SJ 2958-1988 Blank detail specification for piezoelectric ceramic filters for use in electronic equipment--Piezoelectric ceramic filters for IF sound circuit of TV receivers Assessment level E

    China Electronics - SJ Standards

    SJ 2991.11-1988 (Combination dies. Square edge seat)

    China Electronics - SJ Standards

    SJ 2997.1-1988 Combined dies--Scale

    China Electronics - SJ Standards

    SJ 2999.3-1988 Combined dies--Shank

    China Electronics - SJ Standards

    SJ 3028.1-1988 Combined dies--Wrench for slotted nuts

    China Electronics - SJ Standards

    SJ 3011.2-1988 Combined dies--Seat of guide pillars

    China Electronics - SJ Standards

    SJ 3002.3-1988 Combined dies--Piercing point (grooving)

    China Electronics - SJ Standards

    SJ 3002.4-1988 Combined dies--Piercing point (grooving)

    China Electronics - SJ Standards

    SJ 3012.1-1988 Combined dies--Guide bushes

    China Electronics - SJ Standards

    SJ 2962-1988 Blank detail specification for piezoelectric ceramic traps for use in electronic equipment--Piezoelectric ceramic traps for video absorbing circuit of TV receivers Assessment level E

    China Electronics - SJ Standards

    SJ 2957-1988 Sectional specification for piezoelectric ceramic filters for use in electronic equipment-Piezoelectric ceramic filters for IF sound circuits of TV receivers

    China Electronics - SJ Standards

    SJ 3080-1988 General die sets for blanking die--Ejecting rod

    China Electronics - SJ Standards

    SJ 3013-1988 Combined dies--Square pillar sets

    China Electronics - SJ Standards

    SJ 2972-1988 Blank detail specification for surface acoustic wave (SAW) filters for use in electronic equipment--Surface acoustic wave (SAW) filters for IF circuit of color TV receivers (Applicable for certification)

    China Electronics - SJ Standards

    SJ 3012.2-1988 Combined dies--Guide bushes

    China Electronics - SJ Standards

    SJ 2977-1988 Structural features of combined dies

    China Electronics - SJ Standards

    SJ 2981.2-1988 Combined dies--Square bed plate

    China Electronics - SJ Standards

    SJ 2991.8-1988 (T-Shaped seat edge combination dies)

    China Electronics - SJ Standards

    SJ 3098-1988 Cold press dies--Typical assembly for longitudinal feeding of II-type fixed guide plate

    China Electronics - SJ Standards

    SJ 3059.1-1988 General die sets for blanking die--Bushing plate

    China Electronics - SJ Standards

    SJ 3077-1988 General die sets for blanking die--Necking ring

    China Electronics - SJ Standards

    SJ 3005.4-1988 Combined dies--Piercing point (square)

    China Electronics - SJ Standards

    SJ 3004.14-1988 Combined dies--Special cutting edge

    China Electronics - SJ Standards

    SJ 3031.1-1988 Combined dies--Rubber washer

    China Electronics - SJ Standards

    SJ 3020.3-1988 Combined dies--Ejector plate

    China Electronics - SJ Standards

    SJ 2984.3-1988 Combined dies--Rectangular bed plate

    China Electronics - SJ Standards

    SJ 2996.7-1988 Combined dies--Γ-form support plate

    China Electronics - SJ Standards

    SJ 3117-1988 Cold press dies--General holder for fixed guide stripper

    China Electronics - SJ Standards

    SJ 3020.14-1988 Combined dies--Supporting plate

    China Electronics - SJ Standards

    SJ 3038.6-1988 Combined dies--Handlebar

    China Electronics - SJ Standards

    SJ 3088-1988 Cold press dies--Typical structure of cross feeding with fixed stripper

    China Electronics - SJ Standards

    SJ 3090-1988 Cold press dies--Typical structure of Cross feeding with spring stripper

    China Electronics - SJ Standards

    SJ 3106-1988 Cold press dies--Die holder for center pillar of spring guide stripper

    China Electronics - SJ Standards

    SJ 3031.2-1988 Combined dies--Rubber Washer

    China Electronics - SJ Standards

    SJ 3115-1988 Cold press dies--Punch holder of guide plate

    China Electronics - SJ Standards

    SJ 3033.2-1988 Combined dies--Locating cap plate

    China Electronics - SJ Standards

    SJ 2989.1-1988 Combined dies--Iron corner base

    China Electronics - SJ Standards

    SJ 2974-1988 Detail specification for luminance delay lines for color TV receivers for Type YBL

    China Electronics - SJ Standards

    SJ 2965-1988 Sectional specification for piezoelectric ceramic discriminators for use in electronic equipment--Piezoelectric ceramic discriminators for IF sound discriminator circuit of TV receivers

    China Electronics - SJ Standards

    SJ 3004.5-1988 Combined dies--Special cutting edge

    China Electronics - SJ Standards

    SJ 3010.1-1988 Combined dies--Guide pillars

    China Electronics - SJ Standards

    SJ 3019.1-1988 Combined dies--Locating key

    China Electronics - SJ Standards

    SJ 3020.1-1988 Combined dies--Ejector plate

    China Electronics - SJ Standards

    SJ 3020.7-1988 Combined dies--Stripper plate

    China Electronics - SJ Standards

    SJ 3097-1988 Cold press dies--Typical assembly for cross feeding of I-type fixed guide plate

    China Electronics - SJ Standards

    SJ 2982.3-1988 Combined dies--Rectangular bed plate

    China Electronics - SJ Standards

    SJ 2945-1988 Horizontal-linearity coils for colour television sets

    China Electronics - SJ Standards

    SJ 3021.1-1988 Combined dies--Locating seat for stripping

    China Electronics - SJ Standards

    SJ 3038.1-1988 Combined dies--Movable locating compounds

    China Electronics - SJ Standards

    SJ 2996.4-1988 Combined dies--Supports

    China Electronics - SJ Standards

    SJ 2961-1988 Sectional specification for piezoelectric ceramic traps for use in electronic equipement-Piezoelectric ceramic traps for video absorbing circuit of TV receivers

    China Electronics - SJ Standards

    SJ 3035.1-1988 Combined dies--Angle locating compounds

    China Electronics - SJ Standards

    SJ 3020.10-1988 Combined dies--Insert ring for stripping

    China Electronics - SJ Standards

    SJ 2986.3-1988 Combined dies--Drawing plate

    China Electronics - SJ Standards

    SJ 2981.3-1988 Combined dies--Square bed plate

    China Electronics - SJ Standards

    SJ 3005.3-1988 Combined dies--Piercing point (square)

    China Electronics - SJ Standards

    SJ 3003.4-1988 Combined dies. Rounding point

    China Electronics - SJ Standards

    SJ 2991.10-1988 (Combination dies. Square edge seat)

    China Electronics - SJ Standards

    SJ 3015.2-1988 Combined dies--Guide plate (right side)

    China Electronics - SJ Standards

    SJ 2952-1988 Radio-frequency coaxial connectors, Type FL10

    China Electronics - SJ Standards

    SJ 3076-1988 General die sets for blanking die--Screw

    China Electronics - SJ Standards

    SJ 2948-1988 Degaussing coils for colour television sets

    China Electronics - SJ Standards

    SJ 3023.1-1988 Combined dies--Locating plate

    China Electronics - SJ Standards

    SJ 3069-1988 General die sets for blanking die--Supporting plate for stock

    China Electronics - SJ Standards

    SJ 2993.3-1988 Combined dies--Holder of cutting edge

    China Electronics - SJ Standards

    SJ 2983.1-1988 Combined dies--Square bed plate

    China Electronics - SJ Standards

    SJ 3033.3-1988 Combined dies--L-form locating plate

    China Electronics - SJ Standards

    SJ 3032.8-1988 Combined dies--Scale

    China Electronics - SJ Standards

    SJ 2978-1988 Numbering system for combined dies

    China Electronics - SJ Standards

    SJ 2963-1988 Detail specification for piezoelectric ceramic traps for use in electronic equipment--Piezoelectric ceramic traps for Type XT6. 5MB

    China Electronics - SJ Standards

    SJ 3085-1988 General die sets for blanking die--Guide plate

    China Electronics - SJ Standards

    SJ 2985.2-1988 Combined dies--Bar bed plate

    China Electronics - SJ Standards

    SJ 3083.3-1988 General die sets for blanking die--Clamps

    China Electronics - SJ Standards

    SJ 3083.2-1988 General die sets for blanking die--Clamps

    China Electronics - SJ Standards

    SJ 3064-1988 General die sets for blanking die--Guide bushing

    China Electronics - SJ Standards

    SJ 2959-1988 Detail specification for piezoelectric ceramic filters for use in electric equipment--Piezoelectric ceramic filters for Type LT6. 5MB Assessment level E

    China Electronics - SJ Standards

    SJ 2955-1988 Time-lag cartridge fuse-links

    China Electronics - SJ Standards

    SJ 3074-1988 General die sets for blanking die--T-form screw

    China Electronics - SJ Standards

    SJ 3087-1988 Cold press dies--Typical structure of longitudinal feeding with fixed stripper

    China Electronics - SJ Standards

    SJ 3017-1988 Combined dies--Pilot pin

    China Electronics - SJ Standards

    SJ 3101-1988 Cold press dies--Typical assembly for cross feeding of spring guide plate

    China Electronics - SJ Standards

    SJ 3006.1-1988 Combined dies--Upper circular bead point

    China Electronics - SJ Standards

    SJ 3010.2-1988 Combined dies--Guide pillars

    China Electronics - SJ Standards

    SJ 3016.1-1988 Combined dies--Pilot plate

    China Electronics - SJ Standards

    SJ 2998-1988 Combined dies--Spacer blocks

    China Electronics - SJ Standards

    SJ 3026-1988 Combined dies--Washer

    China Electronics - SJ Standards


    Find out:7662Items   |  To Page of: First -Previous-Next -Last  | [47] [48] [49] [50] [51] [52] [53]

     
     

    +86-755-25831330        info@transcustoms.com 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2018 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards