China National Standards
China SJ Standards Search System  
  •  China "SJ" Standards List:
  • Standard  Code Standard English Title Standard Class Order
    SJ 2816.3-1987 Detail specification for (soldered) crystal holders (enclosures) for Type J3

    China Electronics - SJ Standards

    SJ 1.4-1987 Stages-division and requirements for implementation of standards-preparation in electronic industry

    China Electronics - SJ Standards

    SJ 1.7-1987 Requirements for complete documents and related materials when standards drafts submitted for approval

    China Electronics - SJ Standards

    SJ 1.11-1987 Provision and requirements for preparation and revision of technical standards for electronic industry--Requirements for contents of submitted reports concerning draft standards

    China Electronics - SJ Standards

    SJ 1.2-1987 Provision and requirements for preparation and revision of technical standards for electronic industry--Principles and procedures for regulation of standards-preparation plans

    China Electronics - SJ Standards

    SJ 1.6-1987 Procedures and provision for submission and approval of technical standards in electronic industry

    China Electronics - SJ Standards

    SJ 1.3-1987 Development of responsibilities for lead units responsible for technical standards preparation in electronic industry

    China Electronics - SJ Standards

    SJ 1.1-1987 Major procedures and requirements for working out of annual plans relating to technical standards in electronic industry

    China Electronics - SJ Standards

    SJ 1.10-1987 Provision and requirements for preparation and revision of technical standards for electronic industry--Main contents of minutes made at meetings for reviewing draft standards

    China Electronics - SJ Standards

    SJ 1.5-1987 Provision and requirements for preparation and revision of technical standards for electronic industry--Procedures for review of standards drafs by correspondence

    China Electronics - SJ Standards

    SJ 1.8-1987 Provision and requirements for preparation and revision of technical standards for electronic industry--Requirements that should be followed during standards-writing

    China Electronics - SJ Standards

    SJ 1.9-1987 Principles and procedures for return of submitted standards drafts for approval

    China Electronics - SJ Standards

    SJ 1.12-1987 Requirements for review of draft standards by technical committees for professional standardization

    China Electronics - SJ Standards

    SJ 2829-1987 Cross recessed large spherical head screws

    China Electronics - SJ Standards

    SJ 2828-1987 Cross recessed pan head screws

    China Electronics - SJ Standards

    SJ 2837-1987 Specification for cross recessed screws with washers

    China Electronics - SJ Standards

    SJ 2823-1987 Cross recessed oblate head tapping screws

    China Electronics - SJ Standards

    SJ/Z 9073.2-1987 Electrical relays--Part 5: Insulation tests for electrical relays

    China Electronics - SJ Standards

    SJ 2841-1987 Specification for cross recessed tapping screws with washers

    China Electronics - SJ Standards

    SJ 2835-1987 Cross recessed pan head screws with spring washers

    China Electronics - SJ Standards

    SJ 2840-1987 Cross recessed hexagon head tapping screws with plain washers

    China Electronics - SJ Standards

    SJ 2839-1987 Cross recessed large spherical head tapping screws with external toothed washers

    China Electronics - SJ Standards

    SJ 2834-1987 Cross recessed pan head screws with plain washers

    China Electronics - SJ Standards

    SJ 2822-1987 Cross recessed countersunk head tapping screws

    China Electronics - SJ Standards

    SJ 2842-1987 Hexagon nuts with toothed flange

    China Electronics - SJ Standards

    SJ 2843-1987 Hexagon nuts with toothed spring washers

    China Electronics - SJ Standards

    SJ 2836-1987 Cross recessed pan head screws with spring washers and plain washers

    China Electronics - SJ Standards

    SJ 2832-1987 Cross recessed large spherical head with flange thread forming screws

    China Electronics - SJ Standards

    SJ 2819-1987 Tapping screws of heat treated steel--Mechanical properties

    China Electronics - SJ Standards

    SJ 2838-1987 Cross recessed large spherical head tapping screws with plain washers

    China Electronics - SJ Standards

    SJ 2826-1987 Cross recessed hexagon head tapping screws

    China Electronics - SJ Standards

    SJ 2825-1987 Cross recessed large spherical head with flange tapping screws

    China Electronics - SJ Standards

    SJ 2830-1987 Cross recessed large spherical head with flange screws

    China Electronics - SJ Standards

    SJ 2821-1987 Cross recessed pan head tapping screws

    China Electronics - SJ Standards

    SJ 2824-1987 Cross recessed large spherical head tapping screws

    China Electronics - SJ Standards

    SJ 2827-1987 Support bolts for picture tubes

    China Electronics - SJ Standards

    SJ 2820-1987 Cross recesses for screws

    China Electronics - SJ Standards

    SJ/Z 9073.4-1987 Electrical relays--Part 18: Dimensions for general purpose all-or-nothing relays

    China Electronics - SJ Standards

    SJ 2844-1987 Toothed spring washers

    China Electronics - SJ Standards

    SJ 2833-1987 Specification for cross rcessed thread forming screws

    China Electronics - SJ Standards

    SJ 2831-1987 Cross recessed large sperical head thread forming screws

    China Electronics - SJ Standards

    SJ/Z 9073.1-1987 All-or-nothing electrical relays

    China Electronics - SJ Standards

    SJ/Z 9073.3-1987 Electrical relays--Part 15: Enderance tests for electrical relay contacts--Specification for the characterics of test equipment

    China Electronics - SJ Standards

    SJ/Z 9072.4-1987 Axial lead cores made of magnetic oxides or iron powder

    China Electronics - SJ Standards

    SJ/Z 9072.2-1987 Dimensions of cross-core (X-core) made of magnetic oxides and its accessories

    China Electronics - SJ Standards

    SJ/Z 9072.1-1987 Calculation of effective parameters of magnetic parts

    China Electronics - SJ Standards

    SJ 2818-1987 Tapping screws thread

    China Electronics - SJ Standards

    SJ/Z 9070-1987 Special fuses for radio and television equipment

    China Electronics - SJ Standards

    SJ/Z 9071-1987 Binary floating-point arithmetic for microprocessor system

    China Electronics - SJ Standards

    SJ/Z 9068-1987 Antenna discharge unit

    China Electronics - SJ Standards

    SJ/Z 9069-1987 Wire connection board

    China Electronics - SJ Standards

    SJ/Z 9051-1987 Office machines and printing machines used for information processing -- widths of fabric printing ribbonsoon spools

    China Electronics - SJ Standards

    SJ/Z 9064-1987 Safety of information processing and business equipment

    China Electronics - SJ Standards

    SJ/Z 9053-1987 Office machines and printing machines used for information processing. Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons

    China Electronics - SJ Standards

    SJ/Z 9055-1987 Paper or plastic printing ribbons. Characteristics of cores

    China Electronics - SJ Standards

    SJ/Z 9058-1987 Office machines-keyboards-key numbering system and layout charts

    China Electronics - SJ Standards

    SJ/Z 9067-1987 Implosion-protected cathode-ray tubes for television equipment

    China Electronics - SJ Standards

    SJ/Z 9059-1987 Keyboards for countries whose languages have alphabetic extenders - Guidelines for harmonization

    China Electronics - SJ Standards

    SJ/Z 9052-1987 Printing ribbons. Minimum markings to appear on containers

    China Electronics - SJ Standards

    SJ/Z 9050-1987 Dictation equipment. Basic operating requirements

    China Electronics - SJ Standards

    SJ/Z 9065-1987 Laboratory equipment

    China Electronics - SJ Standards

    SJ/Z 9056-1987 Office machines and printing machines used for information processing--Widths of fabric printing ribbons exceeding 19mm

    China Electronics - SJ Standards

    SJ/Z 9062-1987 (Information processing - processing order by record set the volume of the program flow)

    China Electronics - SJ Standards

    SJ/Z 9061-1987 Information processing--Specification of single-hit decision tables

    China Electronics - SJ Standards

    SJ/Z 9057-1987 (Dictation devices - Symbols)

    China Electronics - SJ Standards

    SJ/Z 9054-1987 Forms design sheet and layout chart

    China Electronics - SJ Standards

    SJ/Z 9066-1987 High-voltage components for television equipment

    China Electronics - SJ Standards

    SJ/Z 9063-1987 Commercial audio equipment

    China Electronics - SJ Standards

    SJ/Z 9086-1987 Information processing--Start-stop transmission signal quality at DTE/DCE interfaces

    China Electronics - SJ Standards

    SJ/Z 9046-1987 Information processing - Magnetic disk for data storage devices - 107, 500 flux transitions per track, with OD of 266 and 356mm

    China Electronics - SJ Standards

    SJ/Z 9045-1987 Information processing - Magnetic disk for data storage devices - 160, 000 flux transitions per track, with OD of 356mm

    China Electronics - SJ Standards

    SJ/Z 9047-1987 Information processing. Representation of numerical values in charactor strings for information interchange

    China Electronics - SJ Standards

    SJ/Z 9049-1987 Information processing. Self-Loading cartridges for 12.7mm wide magnetic tape

    China Electronics - SJ Standards

    SJ/Z 9034-1987 Packaging of components for automatic assembly Part 1: Tape packaging of components with axial lead

    China Electronics - SJ Standards

    SJ/Z 9027-1987 Identification cards--Numbering system and registration procedure for issuer identifiers

    China Electronics - SJ Standards

    SJ/Z 9060-1987 Information processing - Guidelines for documentation of computer-based application systems

    China Electronics - SJ Standards

    SJ/Z 9041-1987 Across-the-line, antenna-coupling and line-by-pass capacitors for radio and television-type appliances

    China Electronics - SJ Standards

    SJ/Z 9028-1987 Identification cards--Financial transaction cards

    China Electronics - SJ Standards

    SJ/Z 9039-1987 fusing resistor and temperature-limit resistor for radio and television equipment

    China Electronics - SJ Standards

    SJ/Z 9042-1987 Over-current and over-temperature protection device for radio and television equipment

    China Electronics - SJ Standards

    SJ/Z 9024-1987 Identification cards - Machine readable passports

    China Electronics - SJ Standards

    SJ/Z 9026.4-1987 (Identification cards - Recording technique Part IV: Read-only channel and two tracks --1 positioning)

    China Electronics - SJ Standards

    SJ/Z 9036-1987 Electrical and electronic measuring and testing equipment

    China Electronics - SJ Standards

    SJ/Z 9026.5-1987 (Identification cards - Recording technique - Part V: read - write track --3 Road location)

    China Electronics - SJ Standards

    SJ/Z 9038-1987 EMI filter

    China Electronics - SJ Standards

    SJ/Z 9026.2-1987 (Identification cards - Recording technique Part II: Magnetic Stripe)

    China Electronics - SJ Standards

    SJ/Z 9025-1987 Identification cards--Physical characteristics

    China Electronics - SJ Standards

    SJ/Z 9048-1987 Information processing - Reels for 12. 7mm wide magnetic tapes - size of 16, 18 and 22

    China Electronics - SJ Standards

    SJ/Z 9026.3-1987 (Identification cards - Recording technique - Part III: the ID-1 card positioning embossed characters)

    China Electronics - SJ Standards

    SJ/Z 9037-1987 Quick terminal

    China Electronics - SJ Standards

    SJ/Z 9040-1987 Dual in-line converter device

    China Electronics - SJ Standards

    SJ/Z 9033-1987 Printed boards. Part 1: General information for the specification writer

    China Electronics - SJ Standards

    SJ/Z 9026.1-1987 (Identification cards - Recording technique Part I: letterpress)

    China Electronics - SJ Standards

    SJ/Z 9029.3-1987 Disturbances in power supply systems caused by household appliances and similar electrical equipment Part 3: Voltage fluctuation

    China Electronics - SJ Standards

    SJ/Z 9029.2-1987 Disturbances in power supply systems caused by household appliances and similar electrical equipment Part 2: Harmonic waves

    China Electronics - SJ Standards

    SJ/Z 9029.1-1987 Disturbances in power supply systems caused by household appliances and similar electrical equipment Part 1: Definitions

    China Electronics - SJ Standards

    SJ/Z 9032-1987 guidelines - measuring method of short duration of transient signal on low-voltage power and signal cables

    China Electronics - SJ Standards

    SJ/Z 9031-1987 Considerations on determination of reference impedance of interference characteristics of household appliances and similar electrical equipment

    China Electronics - SJ Standards

    SJ/Z 9035-1987 Stabilized supply apparatus for measurement

    China Electronics - SJ Standards

    SJ/Z 9030-1987 Non-ionizing radiation hazard in frequency range of 10 -- 300, 000 MHz

    China Electronics - SJ Standards


    Find out:7662Items   |  To Page of: First -Previous-Next -Last  | [54] [55] [56] [57] [58] [59] [60]

     
     

    +86-755-25831330        info@transcustoms.com 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2018 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards