Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 20674.2-2006 |
Plastics Pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion 塑料管材和管件 聚乙烯系统熔接设备 第2部分：电熔连接 |
China National Standards Pipes |
 English PDF |
| GB/T 20674.1-2006 |
Plastics Pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1：Butt fusion 塑料管材和管件 聚乙烯系统熔接设备 第1部分：热熔对接 |
China National Standards Pipes |
English PDF |
| GB/T 16752-2006 |
Test methods of concrete and reinforced concrete drainage and sewer Pipes 混凝土和钢筋混凝土排水管试验方法 |
China National Standards Pipes |
English PDF |
| GB/T 20221-2006 |
Unplasticized poly(vinyl chloride)(PVC-U) Pipes for non-pressure buried drainage and sewerage systems 无压埋地排污、排水用硬聚氯乙烯(PVC-U)管材 |
China National Standards Pipes |
English PDF |
| GB/T 13664-2006 |
Unplasticized poly(vinyl chloride) (PVC-U) Pipes for low-pressure conveyance in irrigation 低压输水灌溉用硬聚氯乙烯(PVC-U)管材 |
China National Standards Pipes |
English PDF |
| GB/T 5836.1-2006 |
Unplasticized poly (vinyl chloride) (PVC-U) Pipes for soil and waste discharge inside buildings 建筑排水用硬聚氯乙烯(PVC-U)管材 |
China National Standards Pipes |
English PDF |
| GB/T 20207.1-2006 |
Acrylonitrile-butadiene-styrene (ABS) pressure piping systems--Part 1: Pipes 丙烯腈-丁二烯-苯乙烯（ABS）压力管道系统 第1部分：管材 |
China National Standards Pipes |
English PDF |
| GB/T 20201-2006 |
Mechanical joint fittings for use with polyethylene pressure Pipes for irrigation purposes 灌溉用聚乙烯(PE)压力管机械连接管件 |
China National Standards Pipes |
English PDF |
| GB/T 15819-2006 |
Polyethylene (PE) Pipes for irrigation laterals - Susceptibility to envionmental stress cracking induced by insert-type fittings - Test method and specification 灌溉用聚乙烯(PE)管材由插入式管件引起环境应力开裂敏感性的试验方法和技术要求 |
China National Standards Pipes |
English PDF |
| GB/T 10002.1-2006 |
Unplasticized poly(vinyl chloride) (PVC-U) Pipes for water supply 给水用硬聚氯乙烯(PVC-U)管材 |
China National Standards Pipes |
English PDF |
| GB/T 19993-2005 |
Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of Pipes and fittings mounted assemblies to thermal cycling 冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法 |
China National Standards Pipes |
English PDF |
| GB/T 19796-2005 |
Agricultural irrigation equipment-Plastics saddles for polyethylene pressure Pipes 农业灌溉设备 聚乙烯承压管用塑料鞍座 |
China National Standards Pipes |
English PDF |
| GB/T 19809-2005 |
Plastics Pipes and fittings-Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion 塑料管材和管件 聚乙烯(PE)管材/管材或管材/管件热熔对接组件的制备 |
China National Standards Pipes |
English PDF |
| GB/T 19808-2005 |
Plastics Pipes and fittings Peel decohesion test for polyethylene(PE)electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm 塑料管材和管件 公称外径大于或等于90mm的聚乙烯电熔组件的拉伸剥离试验 |
China National Standards Pipes |
English PDF |
| GB/T 19807-2005 |
Plastics Pipes and fittings Preparation of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting 塑料管材和管件 聚乙烯管材和电熔管件 组合试件的制备 |
China National Standards Pipes |
English PDF |
| GB/T 19806-2005 |
Plastics Pipes and fittings Crushing decohesion test for polyethylene(PE)electrofusion assemblies 塑料管材和管件 聚乙烯电熔组件的挤压剥离试验 |
China National Standards Pipes |
English PDF |
| GB/T 19712-2005 |
Plastics Pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance 塑料管材和管件 聚乙烯(PE)鞍形旁通抗冲击试验方法 |
China National Standards Pipes |
English PDF |
| GB/T 19647-2005 |
Single wall corrugated plastics Pipes for agricultural drainage 农田排水用塑料单壁波纹管 |
China National Standards Pipes |
English PDF |
| GB/T 19473.2-2004 |
Polybutylene(PB) piping systems for hot and cold water installations--Part 2:Pipes 冷热水用聚丁烯(PB)管道系统 第2部分:管材 |
China National Standards Pipes |
English PDF |
| GB/T 19472.2-2004 |
Polyethylene structure-wall piping system for underground usage--Part 2:Polyethylene spirally enwound structure-wall Pipes 埋地用聚乙烯(PE)结构壁管道系统 第2部分:聚乙烯缠绕结构壁管材 |
China National Standards Pipes |
English PDF |
| GB/T 19472.1-2004 |
Polyethylene structure wall pipeline system for underground usage--Part 1:Polyethylene double wall corrugated Pipes 埋地用聚乙烯(PE)结构壁管道系统 第1部分:聚乙烯双壁波纹管材 |
China National Standards Pipes |
English PDF |
| GB/T 19471.2-2004 |
Plastics piping systems--Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U)for use with PVC-U Pipes--Test method for leaktightness under negative pressure 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 负压密封试验方法 |
China National Standards Pipes |
English PDF |
| GB/T 19471.1-2004 |
Plastics piping systems--Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U)Pipes--Test method forleaktighness under internal pressure and angular deflection 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 偏角密封试验方法 |
China National Standards Pipes |
English PDF |
| GB 15558.1-2003 |
Buried polyethylene(PE)piping systems for the supply of gaseous fuels--Part 1:Pipes 燃气用埋地聚乙烯(PE)管道系统 第1部分:管材 |
China National Standards Pipes |
English PDF |
| GB/T 19280-2003 |
Thermoplastics Pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test) 流体输送用热塑性塑料管材 耐快速裂纹扩展(RCP)的测定 小尺寸稳态试验(S4试验) |
China National Standards Pipes |
English PDF |
| GB/T 19279-2003 |
Polyethylene Pipes--Resistance to slow crack growth--Cone test method 聚乙烯管材 耐慢速裂纹增长 锥体试验方法 |
China National Standards Pipes |
English PDF |
| GB/T 19278-2003 |
General terms and their definitions of thermoplastic Pipes，fittings and valves 热塑性塑料管材、管件及阀门通用术语及其定义 |
China National Standards Pipes |
English PDF |
| GB/T 15345-2003 |
Test methods of concrete Pipes for water transmission 混凝土输水管试验方法 |
China National Standards Pipes |
English PDF |
| GB/T 18998.2-2003 |
Chlorinated poly(vinyl chloride)(PVC-C) piping systems for industrial applications--Part 2: Pipes 工业用氯化聚氯乙烯(PVC-C)管道系统 第2部分: 管材 |
China National Standards Pipes |
English PDF |
| GB/T 9647-2003 |
Thermoplastics Pipes--Determination of ringstiffness 热塑性塑料管材环刚度的测定 |
China National Standards Pipes |
English PDF |
| GB/T 8804.3-2003 |
Thermoplastic Pipes--Determination of tensile properties--Part 3: Polyolefin pipes 热塑性塑料管材 拉伸性能测定 第3部分: 聚烯烃管材 |
China National Standards Pipes |
English PDF |
| GB/T 8804.2-2003 |
Thermoplastic Pipes--Determination of tensile properties--Part 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U)，chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI) 热塑性塑料管材 拉伸性能测定 第2部分: 硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲聚氯乙烯(PVC-HI)管材 |
China National Standards Pipes |
English PDF |
| GB/T 8804.1-2003 |
Thermoplastic Pipes--Determination of tensile properties--Part 1: General test method 热塑性塑料管材 拉伸性能测定 第1部分:试验方法总则 |
China National Standards Pipes |
English PDF |
| GB/T 6111-2003 |
Thermoplastics Pipes for the conveyance of fluids--Resistance to internal pressure--Test method 流体输送用热塑性塑料管材耐内压试验方法 |
China National Standards Pipes |
English PDF |
| GB/T 18993.2-2003 |
Chlorinated poly(vinyl chloride) piping systems for hot and cold water installations--Part 2: Pipes 冷热水用氯化聚氯乙烯(PVC-C)管道系统 第2部分: 管材 |
China National Standards Pipes |
English PDF |
| GB/T 18992.2-2003 |
Crosslinked polyethylene(PE-X) piping systems for hot and cold water installations--Part 2: Pipes 冷热水用交联聚乙烯(PE-X)管道系统 第2部分:管材 |
China National Standards Pipes |
English PDF |
| GB/T 18991-2003 |
Thermoplastics Pipes and fittings forhot and cold water systems 冷热水系统用热塑性塑料管材和管件 |
China National Standards Pipes |
English PDF |
| GB/T 18743-2002 |
Thermoplastics Pipes for the transport of fluids--Determination of impact by the charpy method 流体输送用热塑性塑料管材简支梁冲击试验方法 |
China National Standards Pipes |
English PDF |
| GB/T 18742.2-2002 |
Polypropylene piping systems for hot and cold water installations--Part 2:Pipes 冷热水用聚丙烯管道系统 第2部分:管材 |
China National Standards Pipes |
English PDF |
| GB/T 8802-2001 |
Thermoplastics Pipes and fitting--Determination of vicat softening temperature 热塑性塑料管材、管件 维卡软化温度的测定 |
China National Standards Pipes |
English PDF |
| GB/T 6671-2001 |
Thermoplastics Pipes--Determination of longitudinal reversion 热塑性塑料管材 纵向回缩率的测定 |
China National Standards Pipes |
English PDF |
| GB/T 18476-2001 |
Polyolefin Pipes for the conveyance of fluids--Determination of resistance to crack propagation--Test method for slow crack growth on notched pipes(notch test) 流体输送用聚烯烃管材 耐裂纹扩展的测定 切口管材裂纹慢速增长的试验方法(切口试验) |
China National Standards Pipes |
English PDF |
| GB/T 18475-2001 |
Thermoplastics materials for Pipes and fittings for pressure applications classification and designation--Overall service(design) coefficient 热塑性塑料压力管材和管件用材料分级和命名 总体使用(设计)系数 |
China National Standards Pipes |
English PDF |
| GB/T 18474-2001 |
Pipes and fittings made of crosslinked polyethylene(PE-X)--Estimation of the degree of crosslinkingby determination of the gel content 交联聚乙烯(PE-X)管材与管件 交联度的试验方法 |
China National Standards Pipes |
English PDF |
| GB/T 14152-2001 |
Thermoplastics Pipes--Determination of resistance to external blows--Round-the-clock method 热塑性塑料管材耐外冲击性能试验方法 时针旋转法 |
China National Standards Pipes |
English PDF |
| GB/T 10798-2001 |
Thermoplastics Pipes--Universal wall thickness table 热塑性塑料管材通用壁厚表 |
China National Standards Pipes |
English PDF |
| GB/T 18251-2000 |
Method for the assessment of pigment or carbon black dispersion in polyolefin Pipes，fittings and compounds 聚烯烃管材、管件和混配料中颜料或炭黑分散的测定方法 |
China National Standards Pipes |
English PDF |
| GB/T 13663-2000 |
Polyethylene Pipes for water supply 给水用聚乙烯(PE)管材 |
China National Standards Pipes |
English PDF |
| GB/T 18042-2000 |
Thermoplastics Pipes--Determination of creep ratio 热塑性塑料管材蠕变比率的试验方法 |
China National Standards Pipes |
English PDF |
| GB/T 17459-1998 |
Ductile iron Pipes--Bitumen coating 球墨铸铁管 沥青涂层 |
China National Standards Pipes |
English PDF |
| GB/T 17458-1998 |
Ductile iron Pipes--Centrifugal cement mortar lining--Composition controls of freshly appliedmortar 球墨铸铁管 水泥砂浆离心法衬层 新拌砂浆的成分检验 |
China National Standards Pipes |
English PDF |
| GB/T 17391-1998 |
Test method for thermal stability of polyethylene Pipes and fittings 聚乙烯管材与管件热稳定性试验方法 |
China National Standards Pipes |
English PDF |
| GB/T 15820-1995 |
Test of resistance to pull out ofjoints between polyethylene (PE) pressure Pipes and fittings 聚乙烯压力管材与管件连接的耐拉拔试验 |
China National Standards Pipes |
English PDF |
| GB/T 15560-1995 |
Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics Pipes for the transport of fluids 流体输送用塑料管材液压瞬时爆破和耐压试验方法 |
China National Standards Pipes |
English PDF |
| GB/T 3039-1994 |
Asbestos-cement pressure Pipes and joints for water 石棉水泥输水管及其接头 |
China National Standards Pipes |
English PDF |
| GB/T 13021-1991 |
Determination for the carbon black content of polyethylene Pipes and fittings by calcination and pyrolysis 聚乙烯管材和管件炭黑含量的测定 热失重法 |
China National Standards Pipes |
English PDF |
| Find out:256Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
