Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 41639-2022 |
Plastics Determination of disintegration rate of plastic materials under laboratory-scale simulated composting conditions {译} 塑料 在实验室规模模拟堆肥化条件下塑料材料崩解率的测定 |
China National Standards last |
 English PDF |
| GB/T 41638.1-2022 |
Plastics - Carbon and environmental footprints of bio-based plastics - Part 1: General principles {译} 塑料 生物基塑料的碳足迹和环境足迹 第1部分：通则 |
China National Standards last |
English PDF |
| GB/T 2546.2-2022 |
Plastics - Polypropylene (PP) molding and extrusion materials - Part 2: Specimen preparation and property determination {译} 塑料 聚丙烯(PP)模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards last |
English PDF |
| GB/T 2546.1-2022 |
Plastics - Polypropylene (PP) molding and extrusion materials - Part 1: Nomenclature system and basis of classification {译} 塑料 聚丙烯(PP)模塑和挤出材料 第1部分:命名系统和分类基础 |
China National Standards last |
English PDF |
| GB/T 20564.6-2022 |
High-strength cold-rolled steel sheets and strips for automobiles—Part 6: Transformation-induced plasticity steels {译} 汽车用高强度冷连轧钢板及钢带 第6部分：相变诱导塑性钢 |
China National Standards last |
English PDF |
| GB/T 1927.13-2022 |
Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 13: Determination of transverse grain compressive modulus of elasticity {译} 无疵小试样木材物理力学性质试验方法 第13部分：横纹抗压弹性模量测定 |
China National Standards last |
English PDF |
| GB/T 19812.6-2022 |
Plastic water-saving irrigation equipment - Part 6: Polyethylene (PE) pipes for water delivery {译} 塑料节水灌溉器材 第6部分：输水用聚乙烯（PE）管材 |
China National Standards last |
English PDF |
| GB/T 18997.2-2020 |
Aluminum plastic composite pressure pipe part 2: aluminum pipe butt welded aluminum plastic pipe No. 1 amendment {译} 铝塑复合压力管 第2部分：铝管对接焊式铝塑管《第1号修改单》 |
China National Standards last |
English PDF |
| GB/T 18997.1-2020 |
Aluminum plastic composite pressure pipes - Part 1: lap welded aluminum plastic pipes for aluminum pipes - amendment No. 1 {译} 铝塑复合压力管 第1部分：铝管搭接焊式铝塑管《第1号修改单》 |
China National Standards last |
English PDF |
| GB/T 26255-2022 |
Steel plastic conversion fittings of polyethylene (PE) pipeline system for gas {译} 燃气用聚乙烯（PE）管道系统的钢塑转换管件 |
China National Standards last |
English PDF |
| GB/T 20887.4-2022 |
High strength hot rolled steel sheet and strip for automobile part 4: transformation induced plastic steel {译} 汽车用高强度热连轧钢板及钢带 第4部分:相变诱导塑性钢 |
China National Standards last |
English PDF |
| GB/T 18743.2-2022 |
Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 2: test conditions for pipes of different materials {译} 热塑性塑料管材 简支梁冲击强度的测定 第2部分：不同材料管材的试验条件 |
China National Standards last |
English PDF |
| GB/T 18743.1-2022 |
Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 1: General test methods {译} 热塑性塑料管材 简支梁冲击强度的测定 第1部分：通用试验方法 |
China National Standards last |
English PDF |
| GB/T 16422.4-2022 |
Plastics - laboratory light source exposure test methods - Part 4: open carbon arc lamps {译} 塑料 实验室光源暴露试验方法 第4部分：开放式碳弧灯 |
China National Standards last |
English PDF |
| GB/T 16422.3-2022 |
Plastics - laboratory light source exposure test methods - Part 3: fluorescent ultraviolet lamps {译} 塑料 实验室光源暴露试验方法 第3部分：荧光紫外灯 |
China National Standards last |
English PDF |
| GB/T 16422.2-2022 |
Plastics - laboratory light source exposure test methods - Part 2: Xenon arc lamps {译} 塑料 实验室光源暴露试验方法 第2部分：氙弧灯 |
China National Standards last |
English PDF |
| GB/T 10322.6-2022 |
Determination of hot cracking index of iron ore for blast furnace charge {译} 高炉炉料用铁矿石 热裂指数的测定 |
China National Standards last |
English PDF |
| GB/T 41501-2022 |
Determination of interlaminar shear strength and modulus of fiber reinforced plastic composites by double beam method {译} 纤维增强塑料复合材料 双梁法测定层间剪切强度和模量 |
China National Standards last |
English PDF |
| GB/T 41498-2022 |
Test method for in-plane shear stress / shear strain response and shear modulus using shear frames for fiber reinforced plastic composites {译} 纤维增强塑料复合材料 用剪切框测定面内剪切应力/剪切应变响应和剪切模量的试验方法 |
China National Standards last |
English PDF |
| GB/T 41494-2022 |
Aluminum alloy plastic lined composite pipes and fittings {译} 铝合金衬塑复合管材与管件 |
China National Standards last |
English PDF |
| GB/T 41489-2022 |
Plastics polyamide determination by gas chromatography ε- Caprolactam and ω- Dodecalactam {译} 塑料 聚酰胺 气相色谱法测定ε-己内酰胺和ω-十二内酰胺 |
China National Standards last |
English PDF |
| GB/T 41488-2022 |
Terms, definitions and nomenclature symbols of plastic prepregs {译} 塑料 预浸料 术语定义和命名符号 |
China National Standards last |
English PDF |
| GB/T 41666.3-2022 |
Plastic piping systems for Trenchless repair of underground pressureless drainage networks - Part 3: close fitting lining method {译} 地下无压排水管网非开挖修复用塑料管道系统 第 3 部分：紧密贴合内衬法 |
China National Standards last |
English PDF |
| GB/T 38725.1-2022 |
Coiled reinforced plastic pipes - Part 1: General {译} 可盘绕式增强塑料管 第1部分：总则 |
China National Standards last |
English PDF |
| GB/T 41378-2022 |
Plastics Blow-molded polypropylene containers for liquid food packaging {译} 塑料 液态食品包装用吹塑聚丙烯容器 |
China National Standards last |
English PDF |
| GB/T 41345-2022 |
General technical requirements for compression molding molds for plastic bottle caps {译} 塑料瓶盖压塑成型模具通用技术要求 |
China National Standards last |
English PDF |
| GB/T 41974.1-2022 |
Plastics - Color masterbatches - Part 1: Nomenclature system and basis of classification {译} 塑料 色母料 第1部分：命名系统和分类基础 |
China National Standards last |
English PDF |
| GB/T 9776-2022 |
plaster of construction {译} 建筑石膏 |
China National Standards last |
English PDF |
| GB/T 5568-2022 |
Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without deflection {译} 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 |
China National Standards last |
English PDF |
| GB/T 30923-2022 |
Plastic polypropylene (PP) meltblown special material {译} 塑料 聚丙烯（PP）熔喷专用料 |
China National Standards last |
English PDF |
| GB/T 24218.102-2022 |
Textiles - Test methods for nonwovens - Part 102: Determination of tensile elasticity {译} 纺织品 非织造布试验方法 第102部分：拉伸弹性的测定 |
China National Standards last |
English PDF |
| GB/T 22530-2022 |
Safety requirements for rubber and plastic injection molding machines {译} 橡胶塑料注射成型机安全要求 |
China National Standards last |
English PDF |
| GB/T 8333-2022 |
Plastics - Test method for combustion behavior of rigid foamed plastics - Vertical combustion method {译} 塑料 硬质泡沫塑料燃烧性能试验方法 垂直燃烧法 |
China National Standards last |
English PDF |
| GB/T 42279-2022 |
Vulcanized or thermoplastic rubber Determination of tensile set at constant elongation and determination of tensile set, elongation and creep at constant tensile load {译} 硫化橡胶或热塑性橡胶 在恒定伸长率下测定拉伸永久变形及在恒定拉伸载荷下测定拉伸永久变形、伸长率和蠕变 |
China National Standards last |
English PDF |
| GB/T 39693.8-2022 |
Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 8: Determination of apparent hardness of rubber rollers by Zhao's hardness (P&J) method {译} 硫化橡胶或热塑性橡胶 硬度的测定 第8部分：赵氏硬度（P&J)法测定胶辊的表观硬度 |
China National Standards last |
English PDF |
| GB/T 39693.7-2022 |
Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 7: Determination of the apparent hardness of rubber rollers by the Shore hardness method {译} 硫化橡胶或热塑性橡胶 硬度的测定 第7部分：邵氏硬度法测定胶辊的表观硬度 |
China National Standards last |
English PDF |
| GB/T 42122-2022 |
Vulcanized rubber or thermoplastic rubber - Determination of abrasion resistance (modified Lamborn abrasion tester method) {译} 硫化橡胶或热塑性橡胶 耐磨性能的测定（改进型兰伯恩磨耗试验机法） |
China National Standards last |
English PDF |
| GB/T 29165.2-2022 |
Oil and gas industry - Glass fiber reinforced plastic pipes - Part 2: Evaluation and manufacture {译} 石油天然气工业 玻璃纤维增强塑料管 第2部分：评定与制造 |
China National Standards last |
English PDF |
| GB/T 29165.1-2022 |
Oil and gas industry - Glass fiber reinforced plastic pipes - Part 1: Vocabulary, symbols, applications and materials {译} 石油天然气工业 玻璃纤维增强塑料管 第1部分：词汇、符号、应用及材料 |
China National Standards last |
English PDF |
| GB/T 41927-2022 |
Plastics - Thermoset molding compounds - Short-term performance evaluation at elevated temperatures {译} 塑料 热固性模塑料 高温下的短期性能评估 |
China National Standards last |
English PDF |
| GB/T 41926-2022 |
Plastics - Determination of 1,2-ethylene glycol content in epoxy resins {译} 塑料 环氧树脂 1,2-乙二醇含量的测定 |
China National Standards last |
English PDF |
| GB/T 41928-2022 |
Plastics epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC) {译} 塑料 环氧树脂 差示扫描量热法（DSC）测定交联环氧树脂交联度 |
China National Standards last |
English PDF |
| GB/T 41929-2022 |
Plastics - epoxy resins - test methods {译} 塑料 环氧树脂 试验方法 |
China National Standards last |
English PDF |
| GB/T 41931-2022 |
Plastics/Rubber Polymer Dispersions and Synthetic Rubber Latex Freeze-Thaw Cycle Stability Test {译} 塑料/橡胶 聚合物分散体和合成橡胶胶乳 冻融循环稳定性试验 |
China National Standards last |
English PDF |
| GB/T 41935-2022 |
Plastics - Artificial weathering with acid deposits {译} 塑料 含酸性沉积的人工气候老化 |
China National Standards last |
English PDF |
| GB/T 41932-2022 |
Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) method {译} 塑料 断裂韧性（GIC和KIC）的测定 线弹性断裂力学（LEFM）法 |
China National Standards last |
English PDF |
| GB/T 41933-2022 |
Plastics - Determination of tension-tension fatigue crack growth - Linear elastic fracture mechanics (LEFM) method {译} 塑料 拉-拉疲劳裂纹扩展的测定 线弹性断裂力学(LEFM)法 |
China National Standards last |
English PDF |
| GB/T 41934-2022 |
Plastics - Determination of vertical flame spread of films and sheets {译} 塑料 薄膜和薄片垂直火焰蔓延的测定 |
China National Standards last |
English PDF |
| GB/T 2406.3-2022 |
Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test {译} 塑料 用氧指数法测定燃烧行为 第3部分：高温试验 |
China National Standards last |
English PDF |
| GB/T 11546.2-2022 |
Plastics - Determination of creep properties - Part 2: Three-point bending creep {译} 塑料 蠕变性能的测定 第2部分:三点弯曲蠕变 |
China National Standards last |
English PDF |
| GB/T 19466.5-2022 |
Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve temperature, time, enthalpy of reaction and conversion {译} 塑料 差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间，反应焓和转化率的测定 |
China National Standards last |
English PDF |
| GB/T 41936.2-2022 |
Plastics - Determination of torsional rigidity of flexible materials - Part 2: Plasticized vinyl chloride homopolymers and copolymers {译} 塑料 柔性材料扭转刚度的测定 第2部分: 增塑氯乙烯均聚物和共聚物 |
China National Standards last |
English PDF |
| GB/T 41936.1-2022 |
Plastics - Determination of torsional stiffness of flexible materials - Part 1: General method {译} 塑料 柔性材料扭转刚度的测定 第1部分:通用方法 |
China National Standards last |
English PDF |
| GB/T 33061.11-2022 |
Plastics - Determination of dynamic mechanical properties - Part 11: Glass transition temperature {译} 塑料 动态力学性能的测定 第11部分: 玻璃化转变温度 |
China National Standards last |
English PDF |
| GB/T 41937-2022 |
Rubber or plastics coated fabrics-Physical-mechanical property tests-Determination of flex resistance by deflectionometer method {译} 橡胶或塑料涂覆织物 物理机械性能试验 挠度仪法测定耐曲挠性 |
China National Standards last |
English PDF |
| GB 17896-2022 |
Allowable values of energy efficiency and energy efficiency grades for ballasts used in gas discharge lamps for general lighting {译} 普通照明用气体放电灯用镇流器能效限定值及能效等级 |
China National Standards last |
English PDF |
| GB/T 41758.1-2022 |
Plastics - Polyketone (PK) molding and extrusion materials - Part 1: Nomenclature system and basis of classification {译} 塑料 聚酮（PK）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards last |
English PDF |
| GB/T 13871.1-2022 |
Rotary shaft lip seals with elastomeric sealing elements - Part 1: Dimensions and tolerances {译} 密封元件为弹性体材料的旋转轴唇形密封圈 第1部分：尺寸和公差 |
China National Standards last |
English PDF |
| GB/T 41874-2022 |
Plastic Polyphenylene ether (PPE) resin {译} 塑料 聚苯醚（PPE）树脂 |
China National Standards last |
English PDF |
| GB/T 41873-2022 |
Plastic Polyether ether ketone (PEEK) resin {译} 塑料 聚醚醚酮（PEEK）树脂 |
China National Standards last |
English PDF |
| GB/T 1038.2-2022 |
Plastics - Films and sheets - Test methods for gas permeability - Part 2: Equal pressure method {译} 塑料制品 薄膜和薄片 气体透过性试验方法 第2部分：等压法 |
China National Standards last |
English PDF |
| GB/T 1038.1-2022 |
Plastics - Films and sheets - Test methods for gas permeability - Part 1: Differential pressure method {译} 塑料制品 薄膜和薄片 气体透过性试验方法 第1部分：差压法 |
China National Standards last |
English PDF |
| GB/T 41792-2022 |
Plastics - Films and sheets - Determination of cold cracking temperature {译} 塑料制品 薄膜和薄片 冷裂温度的测定 |
China National Standards last |
English PDF |
| GB/T 41791-2022 |
Plastics Films and sheets Non-oriented polyethylene terephthalate (PET) sheet {译} 塑料制品 薄膜和薄片 无取向聚对苯二甲酸乙二醇酯（PET）片材 |
China National Standards last |
English PDF |
| GB/T 41682-2022 |
Determination of headspace gas content in food plastic packaging containers - sensor method {译} 食品塑料包装容器中顶空气体含量的测定 传感器法 |
China National Standards last |
English PDF |
| GB/T 21239-2022 |
Test method for compressive properties of fiber reinforced plastic laminates after impact {译} 纤维增强塑料层合板冲击后压缩性能试验方法 |
China National Standards last |
English PDF |
| GB/T 41840-2022 |
Lower Limb Orthosis Components Polyurethane Elastic Ankle Hinge {译} 下肢矫形器零部件 聚氨酯弹性踝铰链 |
China National Standards last |
English PDF |
| GB/T 41839-2022 |
waist orthosis elastic waistband {译} 腰部矫形器 弹力围腰 |
China National Standards last |
English PDF |
| GB/T 1844.3-2022 |
Plastics - Symbols and abbreviations - Part 3: Plasticizers {译} 塑料 符号和缩略语 第3部分：增塑剂 |
China National Standards last |
English PDF |
| GB/T 1844.2-2022 |
Plastics - Symbols and abbreviations - Part 2: Fillers and reinforcing materials {译} 塑料 符号和缩略语 第2部分：填料和增强材料 |
China National Standards last |
English PDF |
| GB/T 41709-2022 |
Carbon fiber reinforced plastics - Determination of size and aspect ratio of pulverized material {译} 碳纤维增强塑料 粉碎料尺寸和长宽比的测定 |
China National Standards last |
English PDF |
| GB/T 24135-2022 |
Rubber or plastics coated fabrics - Accelerated aging test {译} 橡胶或塑料涂覆织物 加速老化试验 |
China National Standards last |
English PDF |
| GB/T 41894.3-2022 |
Ships and Offshore Technology Determination of Shaft Power in Ship Propulsion Systems by Measuring Shaft Deformation Part 3: Elastic Vibration Method {译} 船舶与海上技术 通过测量轴变形量确定船舶推进系统轴功率 第3部分：弹性振动法 |
China National Standards last |
English PDF |
| GB/T 1844.1-2022 |
Plastics - Symbols and abbreviations - Part 1: Base polymers and their characteristic properties {译} 塑料 符号和缩略语 第1部分：基础聚合物及其特征性能 |
China National Standards last |
English PDF |
| GB/T 41877.1-2022 |
Plastics - Ethylene-vinyl alcohol (EVOH) copolymer molding and extrusion materials - Part 1: Nomenclature system and basis of classification {译} 塑料 乙烯-乙烯醇（EVOH）共聚物模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards last |
English PDF |
| GB/T 41877.2-2022 |
Plastics - Ethylene-vinyl alcohol (EVOH) copolymer molding and extrusion materials - Part 2: Specimen preparation and property determination {译} 塑料 乙烯-乙烯醇（EVOH）共聚物模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards last |
English PDF |
| GB/T 41878-2022 |
Plastics - Determination of scratch properties {译} 塑料 划痕性能的测定 |
China National Standards last |
English PDF |
| GB/T 41879-2022 |
Plastics - Burning behavior - Medium-scale fire tests of fiber-reinforced polymer composites {译} 塑料 燃烧性能 纤维增强聚合物复合材料的中等尺寸耐火测试 |
China National Standards last |
English PDF |
| GB/T 41762.2-2022 |
Fiber reinforced plastic composites - Determination of through-thickness properties of laminates - Part 2: Determination of elastic modulus, strength and Weibull size effect of carbon fiber unidirectional laminates by bending tests {译} 纤维增强塑料复合材料 层合板厚度方向性能的测定 第2部分：弯曲试验测定碳纤维单向层合板的弹性模量、强度和威布尔尺寸效应 |
China National Standards last |
English PDF |
| GB/T 41880-2022 |
Plastics - epoxy resins - determination of electrical conductivity of aqueous extracts {译} 塑料 环氧树脂 水萃取液电导率的测定 |
China National Standards last |
English PDF |
| GB/T 3517-2022 |
Natural raw rubber - Determination of plasticity retention (PRI) {译} 天然生胶 塑性保持率（PRI）的测定 |
China National Standards last |
English PDF |
| GB/T 13871.6-2022 |
Rotary shaft lip seals with elastomeric sealing elements - Part 6: Specification for elastomeric materials {译} 密封元件为弹性体材料的旋转轴唇形密封圈 第6部分：弹性体材料规范 |
China National Standards last |
English PDF |
| GB/T 3452.5-2022 |
O-ring rubber seals for hydraulic and pneumatic use - Part 5: Specification for elastomeric materials {译} 液压气动用O形橡胶密封圈 第5部分：弹性体材料规范 |
China National Standards last |
English PDF |
| GB/T 41758.2-2022 |
Plastics - Polyketone (PK) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties {译} 塑料 聚酮（PK）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards last |
English PDF |
| GB/T 18512-2022 |
Commercial Coal Quality Blast Furnace Injection Coal {译} 商品煤质量 高炉喷吹用煤 |
China National Standards last |
English PDF |
| GB/T 40611-2021 |
Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/ sandy sediment interface—Method by measuring the oxygen demand in closed respirometer 塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定密闭呼吸计内耗氧量的方法 |
China National Standards last |
English PDF |
| GB/T 40440-2021 |
Plastics—Extruded sheets of impact-modified acrylonitrile-styrene copolymers(ABS,AEPDS and ASA)—Requirements and test methods 塑料制品 抗冲击改性丙烯腈-苯乙烯共聚物(ABS、AEPDS和ASA)挤出板材 要求和试验方法 |
China National Standards last |
English PDF |
| GB/T 40384-2021 |
Plastics—Determination of the transient extensional viscosity of polymer melts 塑料 聚合物熔体瞬态拉伸黏度的测定 |
China National Standards last |
English PDF |
| GB/T 40426.3-2021 |
Plastics—Decorative solid surfacing materials—Part 3:Determination of properties—Non-sheet solid surfacing material 塑料制品 装饰性实体面材 第3部分：性能的测定 非板型实体面材 |
China National Standards last |
English PDF |
| GB/T 40426.2-2021 |
Plastics—Decorative solid surfacing materials—Part 2: Determination of properties—Sheet solid surfacing material 塑料制品 装饰性实体面材 第2部分：性能的测定 板型实体面材 |
China National Standards last |
English PDF |
| GB/T 40426.1-2021 |
Plastics—Decorative solid surfacing materials—Part 1: Classification and specifications 塑料制品 装饰性实体面材 第1部分：分类和规范 |
China National Standards last |
English PDF |
| GB/T 40406-2021 |
Standard test method for static modulus of elasticity and poisson's ratio of carbon materials in compression 炭素材料压缩静态弹性模量和泊松比测定方法 |
China National Standards last |
English PDF |
| GB/T 40402-2021 |
Pre-insulated composite plastic pipes with polyethylene casing 聚乙烯外护管预制保温复合塑料管 |
China National Standards last |
English PDF |
| GB/T 40367-2021 |
Plastics—Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment—Method by analysis of evolved carbon dioxide 塑料 暴露于海洋沉积物中非漂浮材料最终需氧生物分解能力的测定 通过分析释放的二氧化碳的方法 |
China National Standards last |
English PDF |
| GB/T 40340-2021 |
Composites and metal assemblies—Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres—Salt spray tests 复合材料与金属组合件 碳纤维增强聚合物基复合材料胶接或紧固件连接结构人工环境下的电偶腐蚀试验 盐雾试验 |
China National Standards last |
English PDF |
| GB/T 40322-2021 |
Thermoplastic elastomer—Specifications of door sealmaterials for household and similar refrigerating appliances 热塑性弹性体 家用和类似用途制冷器具用门密封材料规范 |
China National Standards last |
English PDF |
| GB/T 40318-2021 |
Plastics—Environmental aspects—General guidelines for their inclusion in standards 塑料 环境因素 标准中环境因素的通则 |
China National Standards last |
English PDF |
| GB/T 40315-2021 |
Plastics—Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value 塑料 采用水溶液保持湿度恒定进行状态调节和试验的小密闭容器 |
China National Standards last |
English PDF |
| GB/T 40302-2021 |
Plastics—Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source 塑料 立式软薄试样与小火焰源接触的燃烧性能测定 |
China National Standards last |
English PDF |
| GB/T 40280-2021 |
Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method 塑料 液态或乳液态或分散体系的树脂 用单筒旋转黏度计测定表观黏度 |
China National Standards last |
English PDF |
| GB/T 39715.4-2021 |
Plastics—Biobased content—Part 4: Determination of biobased mass content 塑料 生物基含量 第4部分：生物基物质含量的测定 |
China National Standards last |
English PDF |
| GB/T 39715.3-2021 |
Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content 塑料 生物基含量 第3部分：生物基合成聚合物含量的测定 |
China National Standards last |
English PDF |
| GB/T 39715.2-2021 |
Plastics—Biobased content—Part 2: Determination of biobased carbon content 塑料 生物基含量 第2部分：生物基碳含量的测定 |
China National Standards last |
English PDF |
| GB/T 39715.1-2021 |
Plastics—Biobased content—Part 1: General principles 塑料 生物基含量 第1部分：通用原则 |
China National Standards last |
English PDF |
| GB/T 37199.1-2021 |
Plastics—Polybutene(PB) moulding and extrusion materials—Part 1：Designation system and basis for specifications 塑料 聚丁烯（PB）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards last |
English PDF |
| GB/T 33047.3-2021 |
Plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics 塑料 聚合物热重法（TG） 第3部分：使用 Ozawa-Friedman 绘图测定活化能和分析反应动力学 |
China National Standards last |
English PDF |
| GB/T 33047.2-2021 |
Plastics—Thermogravimetry (TG) of polymers—Part 2: Determination of activation energy 塑料 聚合物热重法（TG） 第2部分：活化能的测定 |
China National Standards last |
English PDF |
| GB/T 29047-2021 |
Prefabricated directly buried insulating pipes and fittings with polyurethane foamed-plastics and high density polyethylene casing pipes 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件 |
China National Standards last |
English PDF |
| GB/T 17850.9-2021 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 9: Staurolite 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第9部分：十字石 |
China National Standards last |
English PDF |
| GB/T 17794-2021 |
Preformed flexible elastomeric foam thermal insulation 柔性泡沫橡塑绝热制品 |
China National Standards last |
English PDF |
| GB/T 15596-2021 |
Plastics—Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources 塑料 在玻璃过滤后太阳辐射、自然气候或实验室辐射源暴露后颜色和性能变化的测定 |
China National Standards last |
English PDF |
| GB/T 2408-2021 |
Plastics—Determination of burning characteristics—Horizontal and vertical test 塑料 燃烧性能的测定 水平法和垂直法 |
China National Standards last |
English PDF |
| GB/T 1845.2-2021 |
Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料 聚乙烯（PE）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards last |
English PDF |
| GB/T 40497-2021 |
Evaluation principles for the design of offshore facilities against fire and blast loading 海上设施防火与防爆设计评估原则 |
China National Standards last |
English PDF |
| GB/T 40612-2021 |
Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface—Method by analysis of evolved carbon dioxide 塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定释放二氧化碳的方法 |
China National Standards last |
English PDF |
| GB/T 40553-2021 |
Plastics—Specifications for plastics suitable for home composting 塑料 适合家庭堆肥塑料技术规范 |
China National Standards last |
English PDF |
| GB/T 40146-2021 |
Determination of plastic microbead in cosmetics 化妆品中塑料微珠的测定 |
China National Standards last |
English PDF |
| GB/T 40182-2021 |
Guideline of determining plasticized materials in toys or parts of toys that can be placed in the mouth 玩具中塑化材料及可放入口中产品的判定指南 |
China National Standards last |
English PDF |
| GB/T 40266-2021 |
Quality general rules of oxides barrier transparent plastics laminated films and pouches for food packaging 食品包装用氧化物阻隔透明塑料复合膜、袋质量通则 |
China National Standards last |
English PDF |
| GB/T 40237-2021 |
Test method for ignitability of foamed plastic—Welding spark method 泡沫塑料着火性试验方法 电焊火花法 |
China National Standards last |
English PDF |
| GB/T 40224-2021 |
Plastics boxes used for rainwater infiltration,attenuation and storage 雨水渗透、调蓄、储存用塑料模块 |
China National Standards last |
English PDF |
| GB/T 40120-2021 |
Agricultural irrigation equipment—Thermoplastic collapsible hoses for irrigation—Specifications and test methods 农业灌溉设备 灌溉用热塑性可折叠软管 技术规范和试验方法 |
China National Standards last |
English PDF |
| GB/T 40006.3-2021 |
Plastics—Recycled plastics—Part 3:Polypropylene(PP) materials 塑料 再生塑料 第3部分：聚丙烯(PP)材料 |
China National Standards last |
English PDF |
| GB/T 40006.2-2021 |
Plastics—Recycled plastics—Part 2:Polyethylene(PE) materials 塑料 再生塑料 第2部分：聚乙烯(PE)材料 |
China National Standards last |
English PDF |
| GB/T 40006.1-2021 |
Plastics—Recycled plastic—Part 1:General rules 塑料 再生塑料 第1部分：通则 |
China National Standards last |
English PDF |
| GB/T 39989-2021 |
Superelastic titanium-nickel shape memory alloy bar and wire 超弹性钛镍形状记忆合金棒材和丝材 |
China National Standards last |
English PDF |
| GB/T 28897-2021 |
Steel-plastic compound pipes and fittings for fluid service 流体输送用钢塑复合管及管件 |
China National Standards last |
English PDF |
| GB/T 9966.9-2021 |
Test methods for natural stone—Part 9: Determination of the dynamic modulus of elasticity by measuring the fundamental resonance frequency 天然石材试验方法 第9部分：通过测量共振基本频率测定动力弹性模数 |
China National Standards last |
English PDF |
| GB/T 39997-2021 |
Thermoplastic pipework for underground installation at petrol filling stations 加油站埋地用热塑性塑料复合管道系统 |
China National Standards last |
English PDF |
| GB/T 9966.12-2021 |
Test methods for natural stone-Part 12:Determination of static elastic modulus 天然石材试验方法 第12部分：静态弹性模数的测定 |
China National Standards last |
English PDF |
| GB/T 39937-2021 |
Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods 塑料制品 聚丙烯(PP)挤塑板材 要求和试验方法 |
China National Standards last |
English PDF |
| GB/T 39936-2021 |
Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods 深冷保冷用泡沫塑料 |
China National Standards last |
English PDF |
| GB/T 39935-2021 |
Plastics—Film and sheeting—Determination of blocking resistance 塑料制品 薄膜和片材 抗粘连性的测定 |
China National Standards last |
English PDF |
| GB/T 39934-2021 |
Plastics—Film and sheeting—Determination of blocking resistance 家具中挥发性有机化合物的筛查检测方法 气相色谱-质谱法 |
China National Standards last |
English PDF |
| GB/T 39828-2021 |
Test method for determining elastic modulus of thick ceramic coating at elevated temperature 陶瓷厚涂层的高温弹性模量试验方法 |
China National Standards last |
English PDF |
| GB/T 39827.2-2021 |
Plastics -- Post-consumer poly(ethylene terephthalate)(PET) bottle recyclates -- Part 2: Preparation of test specimens and determination properties 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分：试样制备和性能测定 |
China National Standards last |
English PDF |
| GB/T 39827.1-2021 |
Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 1: Designation system and basis for specifications 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第1部分：命名系统和分类基础 |
China National Standards last |
English PDF |
| GB/T 39822-2021 |
Plastics—Determination of yellowness index and change in yellowness index 塑料 黄色指数及其变化值的测定 |
China National Standards last |
English PDF |
| GB/T 39821-2021 |
Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel 塑料 不能从规定漏斗流出的模塑材料表观密度的测定 |
China National Standards last |
English PDF |
| GB/T 39818-2021 |
Plastics—Thermosetting moulding materials—Determination of shrinkage 塑料 热固性模塑材料 收缩率的测定 |
China National Standards last |
English PDF |
| GB/T 39812-2021 |
Plastics—Preparation of test specimens by machining 塑料 试样的机加工制备 |
China National Standards last |
English PDF |
| GB/T 39743-2021 |
Plain bearings—Thermoplastic bushes—Dimensions and tolerance 滑动轴承 热塑性塑料轴套 尺寸与公差 |
China National Standards last |
English PDF |
| GB/T 39693.3-2021 |
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale 硫化橡胶或热塑性橡胶 硬度的测定 第3部分：用超低橡胶硬度（VLRH）标尺 测定定试验力硬度 |
China National Standards last |
English PDF |
| GB/T 10006-2021 |
Plastics—Film and sheeting—Determination of the coefficients of friction 塑料 薄膜和薄片 摩擦系数的测定 |
China National Standards last |
English PDF |
| GB/T 1927.10-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending 无疵小试样木材物理力学性质试验方法 第10部分：抗弯弹性模量测定 |
China National Standards last |
English PDF |
| GB/T 41003.2-2021 |
General technical specification for plastic foam mats—Part 2: Indoor polyvinyl chloride foam mats 塑料泡沫垫通用技术条件 第2部分：室内聚氯乙烯泡沫垫 |
China National Standards last |
English PDF |
| GB/T 41004.2-2021 |
Intelligent pipe network system-Part 2 :Intelligent plastic pipes , fittings and valves 智能管网系统 第2部分：智能塑料管材、管件及阀门 |
China National Standards last |
English PDF |
| GB/T 3681.2-2021 |
Plastics—Methods of exposure to solar radiation—Part 2: Direct weathering and exposure behind window glass 塑料 太阳辐射暴露试验方法 第2部分：直接自然气候老化和暴露在窗玻璃后气候老化 |
China National Standards last |
English PDF |
| GB/T 3681.1-2021 |
Plastics—Methods of exposure to solar radiation—Part 1: General guidance 塑料 太阳辐射暴露试验方法 第1部分：总则 |
China National Standards last |
English PDF |
| GB/T 41003.1-2021 |
General technical specification for plastic foam mats—Part 1:Polyethylene/ethylene vinylacetate copolymer foam mats for children 塑料泡沫垫通用技术条件 第1部分：聚乙烯/乙烯-醋酸乙烯酯共聚物儿童泡沫垫 |
China National Standards last |
English PDF |
| GB/T 41048-2021 |
Technical requirements for plastics inspection chamber and manhole for urban drainage 城镇排水用塑料检查井技术要求 |
China National Standards last |
English PDF |
| GB/T 41169-2021 |
Paper, aluminum foil and plastic laminated film and pouch for food packaging 食品包装用纸铝塑复合膜、袋 |
China National Standards last |
English PDF |
| GB/T 41168-2021 |
Plastics and aluminum foil laminated retort film and pouch for food packaging 食品包装用塑料与铝箔蒸煮复合膜、袋 |
China National Standards last |
English PDF |
| GB/T 41061-2021 |
Test methods for creep properties of fiber reinforced plastics 纤维增强塑料蠕变性能试验方法 |
China National Standards last |
English PDF |
| GB/T 24282-2021 |
Plastics—Determination of xylene-soluble matter fraction in polypropylene 塑料 聚丙烯中二甲苯可溶物含量的测定 |
China National Standards last |
English PDF |
| GB 14232.4-2021 |
Plastics collapsible containers for human blood and blood components—Part 4: Aphaeresis blood bag systems with integrated features 人体血液及血液成分袋式塑料容器 第4部分：含特殊组件的单采血袋系统 |
China National Standards last |
English PDF |
| GB/T 41010-2021 |
Degradability and identification requirements of biodegradable plastics and products 生物降解塑料与制品降解性能及标识要求 |
China National Standards last |
English PDF |
| GB/T 1037-2021 |
Test method for water vapor transmission of plastic film and sheet—Desiccant method and water method 塑料薄膜与薄片水蒸气透过性能测定 杯式增重与减重法 |
China National Standards last |
English PDF |
| GB/T 40933-2021 |
Plastics—Film and sheeting—Guidance on the testing of thermoplastic films 塑料制品 薄膜和薄片 热塑性塑料薄膜试验指南 |
China National Standards last |
English PDF |
| GB/T 40911.3-2021 |
Plastics—Poly(methyl methacrylate) sheets—Types,dimensions and characteristics—Part 3:Continuous cast sheets 塑料制品 聚甲基丙烯酸甲酯板材 类型、尺寸和特性 第3部分：连续浇铸板材 |
China National Standards last |
English PDF |
| GB/T 40911.2-2021 |
Plastics—Poly(methyl methacrylate)sheets—Types,dimensions and characteristics—Part 2:Extruded sheets 塑料制品 聚甲基丙烯酸甲酯板材 类型、尺寸和特性 第2部分：挤出板材 |
China National Standards last |
English PDF |
| GB/T 40937-2021 |
Plastic piping systems—Determination of long-term strength for plastic composite pipes and fittings 塑料管道系统 塑料复合管材和管件长期强度的测定方法 |
China National Standards last |
English PDF |
| GB/T 40918-2021 |
General technical requirements of polystyrene wood-imitation plastic board for outdoor application 聚苯乙烯户外仿木板材通用技术要求 |
China National Standards last |
English PDF |
| GB/T 41001-2021 |
Melamine plastic tableware 密胺塑料餐饮具 |
China National Standards last |
English PDF |
| GB/T 40726-2021 |
Rubber-or plastics-coated fabrics—Determination of fogging characteristics of trim materials in the interior of automobiles 橡胶或塑料涂覆织物 汽车内饰材料雾化性能的测定 |
China National Standards last |
English PDF |
| GB/T 30314-2021 |
Rubber- or plastics-coated fabrics—Determination of abrasion resistance—Taber abrader 橡胶或塑料涂覆织物 耐磨性的测定 泰伯法 |
China National Standards last |
English PDF |
| GB/T 18426-2021 |
Rubber-or plastics-coated fabrics—Low-temperature bend test 橡胶或塑料涂覆织物 低温弯曲试验 |
China National Standards last |
English PDF |
| GB/T 40006.9-2021 |
Plastics—Recycled plastics—Part 9:Poly(ethylene terephthalate) (PET) materials 塑料 再生塑料 第9部分：聚对苯二甲酸乙二醇酯(PET)材料 |
China National Standards last |
English PDF |
| GB/T 40006.8-2021 |
Plastics—Recycled plastics—Part 8: Polyamide (PA) materials 塑料 再生塑料 第8部分：聚酰胺(PA)材料 |
China National Standards last |
English PDF |
| GB/T 40006.7-2021 |
Plastics—Recycled plastics—Part 7: Polycarbonate(PC) materials 塑料 再生塑料 第7部分：聚碳酸酯(PC)材料 |
China National Standards last |
English PDF |
| GB/T 40006.6-2021 |
Plastics—Recycled plastics—Part 6: Polystyrene（PS）and impact-resistant polystyrene(PS-I) materials 塑料 再生塑料 第6部分：聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）材料 |
China National Standards last |
English PDF |
| GB/T 40006.5-2021 |
Plastics—Recycled plastics—Part 5：Acrylonitrile-butadiene-styrene (ABS) materials 塑料 再生塑料 第5部分：丙烯腈-丁二烯-苯乙烯（ABS）材料 |
China National Standards last |
English PDF |
| GB/T 19789-2021 |
Packaging material—Test method for oxygen gas permeability characteristics of plastic film and sheeting—Coulometric sensor 包装材料 塑料薄膜和薄片氧气透过性试验 库仑计检测法 |
China National Standards last |
English PDF |
| GB/T 9142-2021 |
Specification of plastic-steel bilayer self-lubricating materials—Part 1：Running-in layer with modified PTFE tape 建筑施工机械与设备 混凝土搅拌机 |
China National Standards last |
English PDF |
| GB/T 40719-2021 |
Rubber,vulcanized or themoplastic—Determination of volume and/or surface resistivity 硫化橡胶或热塑性橡胶 体积和/或表面电阻率的测定 |
China National Standards last |
English PDF |
| GB/T 39693.9-2021 |
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers 硫化橡胶或热塑性橡胶 硬度的测定 第9部分：硬度计的校准和验证 |
China National Standards last |
English PDF |
| GB/T 40872-2021 |
Plastics—Test methods of polyethylene cellular 塑料 聚乙烯泡沫试验方法 |
China National Standards last |
English PDF |
| GB/T 40797-2021 |
Rubber, vulcanized or thermoplastic -- Determination of resistance to abrasion -- Driven, vertical abrasive disc method 硫化橡胶或热塑性橡胶 耐磨性能的测定 垂直驱动磨盘法 |
China National Standards last |
English PDF |
| GB/T 22271.2-2021 |
Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards last |
English PDF |
| GB/T 13542.2-2021 |
Plastic films for electrical purposes—Part 2:Methods of test 电气绝缘用薄膜 第2部分：试验方法 |
China National Standards last |
English PDF |
| GB/T 22271.1-2021 |
Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 1: Designation system and basis for specification 塑料 聚甲醛（POM）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards last |
English PDF |
| GB/T 10457-2021 |
General requirement of plastic self-cling wrap film for keeping food fresh 食品用塑料自粘保鲜膜质量通则 |
China National Standards last |
English PDF |
| GB/T 39506-2020 |
Determination of the poly vinyl chloride (PVC) content of unplasticized poly vinyl chloride (PVC-U) pipes and fittings—Method based on total chlorine content 硬聚氯乙烯（PVC-U）管材及管件中聚氯乙烯（PVC）含量的测定 基于总氯含量的方法 |
China National Standards last |
English PDF |
| GB/T 21661-2020 |
Plastic shopping bags 塑料购物袋 |
China National Standards last |
English PDF |
| GB/T 39151-2020 |
Nickel beryllium titanium alloy strip for high temperature elastic component 高温弹性元件用镍铍钛合金带材 |
China National Standards last |
English PDF |
| GB/T 39142.1-2020 |
Specification of plastic-steel bilayer self-lubricating materials—Part 1：Running-in layer with modified PTFE tape 塑料－钢背二层粘接复合自润滑板材技术条件 第1部分：带改性聚四氟乙烯（PTFE）减摩层的板材 |
China National Standards last |
English PDF |
| GB/T 39171-2020 |
Technical specification for waste plastics recycling 废塑料回收技术规范 |
China National Standards last |
English PDF |
| GB/T 39072-2020 |
Regulation for artificial bed-log production of plastic bag cultured white jelly fungus 袋栽银耳菌棒生产规范 |
China National Standards last |
English PDF |
| GB 14232.1-2020 |
Plastics collapsible containers for human blood and blood components—Part 1: Conventional containers 人体血液及血液成分袋式塑料容器 第1部分：传统型血袋 |
China National Standards last |
English PDF |
| GB/T 38989-2020 |
Uniaxial compressive elastic modulus test method of materials stabilazed with inorganic binder（middle segment method） 无机结合料稳定类材料单轴压缩弹性模量试验方法（中间段法） |
China National Standards last |
English PDF |
| GB/T 8813-2020 |
Rigid cellular plastics—Determination of compression properties 硬质泡沫塑料 压缩性能的测定 |
China National Standards last |
English PDF |
| GB/T 24451-2020 |
Low resilience flexible polyurethane cellular plastics 慢回弹软质聚氨酯泡沫塑料 |
China National Standards last |
English PDF |
| GB/T 39041-2020 |
Carbon steel-fiber reinforced plastic clad bars for reinforcement concrete 钢筋混凝土用碳素钢-纤维增强复合材料复合钢筋 |
China National Standards last |
English PDF |
| GB/T 38897-2020 |
Non-destructive testing—Measurement method for material elastic modulus and Poisson’s ratio using ultrasoinc velocity 无损检测 弹性模量和泊松比的超声测量方法 |
China National Standards last |
English PDF |
| GB/T 38737-2020 |
Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production 塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法 |
China National Standards last |
English PDF |
| GB/T 38725.2-2020 |
Spoolable reinforced plastic pipe一Part 2: Fiber reinforced thermoplastic coiled pipe 可盘绕式增强塑料管 第2部分：纤维增强热塑性塑料连续管 |
China National Standards last |
English PDF |
| GB/T 38787-2020 |
Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials 塑料 材料生物分解试验用样品制备方法 |
China National Standards last |
English PDF |
| GB/T 38757-2020 |
Specifications for facility agricultural microclimate observation—Heliogreenhouse and plastic tunnel 设施农业小气候观测规范 日光温室和塑料大棚 |
China National Standards last |
English PDF |
| GB/T 38687-2020 |
Rubber and plastics machinery—Communicating protocol for auxiliary equipment 橡胶塑料机械 外围设备通信协议 |
China National Standards last |
English PDF |
| GB/T 25156-2020 |
General specifications and inspection methods of rubber and plastics injection moulding machines 橡胶塑料注射成型机通用技术要求及检测方法 |
China National Standards last |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
