Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 28712.4-2012 |
Types and basic parameters of heat exchangers - Part 4: vertical thermo-siphon reboilers 热交换器型式与基本参数 第4部分：立式热虹吸式重沸器 |
China National Standards meters |
 English PDF |
| GB/T 28712.3-2012 |
Types and basic parameters of heat exchangers - Part 3: U-tube heat exchangers 热交换器型式与基本参数 第3部分：U形管式热交换器 |
China National Standards meters |
English PDF |
| GB/T 28712.2-2012 |
Types and basic parameters of heat exchangers - Part 2: Fixed tube sheet heat exchangers 热交换器型式与基本参数 第2部分：固定管板式热交换器 |
China National Standards meters |
English PDF |
| GB/T 28712.1-2012 |
Types and basic parameters of heat exchangers - Part 1：floating heat exchangers 热交换器型式与基本参数 第1部分：浮头式热交换器 |
China National Standards meters |
English PDF |
| GB/T 24513.3-2012 |
Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity 金属和合金的腐蚀 室内大气低腐蚀性分类 第3部分：影响室内大气腐蚀性的环境参数测定 |
China National Standards meters |
English PDF |
| GB/T 12613.2-2011 |
Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameters 滑动轴承 卷制轴套 第2部分: 外径和内径的检测数据 |
China National Standards meters |
English PDF |
| GB/T 28197-2011 |
Methods for characterising tristimulus colorimeters for measuring the colour of light 测量光源颜色用三刺激值色度计的表征方法 |
China National Standards meters |
English PDF |
| GB/T 6968-2011 |
Diaphragm gas meters 膜式燃气表 |
China National Standards meters |
English PDF |
| GB/T 8496-2011 |
Basic parameters and methods of measurement on electronic tuner for receivers for television broadcast transmissions 电视广播接收机电子式调谐器基本参数及测量方法 |
China National Standards meters |
English PDF |
| GB/T 26794-2011 |
Indexes for diaphragm gas meters 膜式燃气表用计数器 |
China National Standards meters |
English PDF |
| GB/T 14695-2011 |
Bucket wheel stacker reclaimer - Type and basic parameters 臂式斗轮堆取料机 型式和基本参数 |
China National Standards meters |
English PDF |
| GB/T 26707-2011 |
Wrist and pocket watches - Fitting diameters for hour，minute and second hands 手表和怀表 时针、分针和秒针的配合直径 |
China National Standards meters |
English PDF |
| GB/T 26141.1-2010 |
Non-destructive testing - Qualification of radiographic film digitisation systems - Part1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control 无损检测 射线照相底片数字化系统的质量鉴定 第1部分：定义、像质参数的定量测量、标准参考底片和定性控制 |
China National Standards meters |
English PDF |
| GB/T 26334-2010 |
Fittings for installation of diaphragm gas meters 膜式燃气表安装配件 |
China National Standards meters |
English PDF |
| GB/T 26177-2010 |
Methods of characterizing the performance of radiometers and photometers 辐射度计和光度计性能的评价方法 |
China National Standards meters |
English PDF |
| GB/T 25922-2010 |
Measurement of fluid flow in closed conduits - Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full 封闭管道中流体流量的测量 用安装在充满流体的圆形截面管道中的涡街流量计测量流量的方法 |
China National Standards meters |
English PDF |
| GB/T 25918-2010 |
Portable calibration instrument for water meters 便携式水表校验仪 |
China National Standards meters |
English PDF |
| GB/T 9112-2010 |
Types and parameters for steel pipe flanges 钢制管法兰 类型与参数 |
China National Standards meters |
English PDF |
| GB/T 26113-2010 |
Micro-electromechanical system technology - General rules for the assessment of micro-geometrical parameters 微机电系统（MEMS）技术 微几何量评定总则 |
China National Standards meters |
English PDF |
| GB/T 26112-2010 |
Micro-electromechanical system technology - General rules for the assessment of micro-mechanical parameters 微机电系统（MEMS）技术 微机械量评定总则 |
China National Standards meters |
English PDF |
| GB/T 25859-2010 |
The stand form and basic parameters of ice storage tank in cool storage system 蓄冷系统用蓄冰槽 型式与基本参数 |
China National Standards meters |
English PDF |
| GB/T 25714.1-2010 |
Molten iron ladle - Part 2: Types and basic parameters 铁液浇包 第1部分：型式与基本参数 |
China National Standards meters |
English PDF |
| GB/T 7341.1-2010 |
Electroacoustics - Audiological equipment - Part 1: Pure-tone audiometers 电声学 测听设备 第1部分：纯音听力计 |
China National Standards meters |
English PDF |
| GB/T 15952-2010 |
Electroacoustics - Specifications for personal sound exposure meters 电声学 个人声暴露计规范 |
China National Standards meters |
English PDF |
| GB/T 25635.2-2010 |
Electrochemical deburring machines - Part 2：Parameters 电解去毛刺机床 第2部分：参数 |
China National Standards meters |
English PDF |
| GB/T 25634.2-2010 |
Tire mould electro-discharge machines - Part 2：Parameters 电火花轮胎模加工机床 第2部分：参数 |
China National Standards meters |
English PDF |
| GB/T 12162.4-2010 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第4部分：低能X射线参考辐射场中场所和个人剂量仪的校准 |
China National Standards meters |
English PDF |
| GB/T 25278-2010 |
Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers 塑料 用毛细管和狭缝口模流变仪测定塑料的流动性 |
China National Standards meters |
English PDF |
| GB/T 25268-2010 |
Rubber - Guide to the use of curemeters 橡胶 硫化仪使用指南 |
China National Standards meters |
English PDF |
| GB/T 25189-2010 |
Microbeam analysis - Determination method for quantitative analysis parameters of SEM-EDS 微束分析 扫描电镜能谱仪定量分析参数的测定方法 |
China National Standards meters |
English PDF |
| GB/T 25187-2010 |
Surface chemical analysis - Auger electron spectroscopy - Description of selected instrumental performance parameters 表面化学分析 俄歇电子能谱 - 选择仪器性能参数的表述 |
China National Standards meters |
English PDF |
| GB/T 25184-2010 |
Verification method for X-ray photoelectron spectrometers X射线光电子能谱仪检定方法 |
China National Standards meters |
English PDF |
| GB/T 25141-2010 |
Self-priming type rotodynamic pumps - Types and basic parameters 自吸式回转动力泵 型式与基本参数 |
China National Standards meters |
English PDF |
| GB/T 3785.2-2010 |
Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests 电声学 声级计 第2部分：型式评价试验 |
China National Standards meters |
English PDF |
| GB/T 3785.1-2010 |
Electroacoustics - Sound level meters - Part 1: Specifications 电声学 声级计 第1部分：规范 |
China National Standards meters |
English PDF |
| GB/T 17286.3-2010 |
Liquid hydrocarbon - Dynamic measurement - Proving system for volumetric meters - Part 3: Pulse interpolation techniques 液态烃动态测量 体积计量流量计检定系统 第3部分：脉冲插入技术 |
China National Standards meters |
English PDF |
| GB/T 24959-2010 |
Refrigerated light hydrocarbon fluids - Measurement of temperature in tanks containing liquefied gases - Resistance thermometers and thermocouples 冷冻轻烃流体 液化气储罐内温度的测量 电阻温度计和热电偶 |
China National Standards meters |
English PDF |
| GB/T 24867-2010 |
Determination of moisture content of forage seed - Moisture meters method 草种子水分测定 水分仪法 |
China National Standards meters |
English PDF |
| GB/T 18618-2009 |
Geometrical product specifications (GPS) - Surface texture - Profile method - Motif parameters 产品几何技术规范（GPS） 表面结构 轮廓法 图形参数 |
China National Standards meters |
English PDF |
| GB/T 24633.1-2009 |
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form 产品几何技术规范（GPS） 圆柱度 第1部分：词汇和参数 |
China National Standards meters |
English PDF |
| GB/T 24632.1-2009 |
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness 产品几何技术规范（GPS） 圆度 第1部分：词汇和参数 |
China National Standards meters |
English PDF |
| GB/T 24631.1-2009 |
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness 产品几何技术规范（GPS） 直线度 第1部分：词汇和参数 |
China National Standards meters |
English PDF |
| GB/T 24630.1-2009 |
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness 产品几何技术规范（GPS） 平面度 第1部分：词汇和参数 |
China National Standards meters |
English PDF |
| GB/T 22264.6-2009 |
Mounted digital display electric measuring instruments - Part 6: Special requirements for insulation resistance meters 安装式数字显示电测量仪表 第6部分：绝缘电阻表的特殊要求 |
China National Standards meters |
English PDF |
| GB/T 10987-2009 |
Optical systems - Determination of parameters 光学系统 参数的测定 |
China National Standards meters |
English PDF |
| GB/T 24291-2009 |
Paper and board - Specification for internal diameters of cores for reels 纸和纸板 卷筒纸芯内径的规定 |
China National Standards meters |
English PDF |
| GB/T 24261.1-2009 |
Marine seismic digital streamer system - Part 1: Standards for specifying hydrophone parameters 石油海上数字地震采集拖缆系统 第1部分：水听器技术条件 |
China National Standards meters |
English PDF |
| GB/T 5170.14-2009 |
Inspection methods for basic parameters of environmental testing equipments - Electrodynamic vibrating type machines for vibration(sinusoidal) test 环境试验设备基本参数检验方法 振动（正弦）试验用电动振动台 |
China National Standards meters |
English PDF |
| GB/T 23649-2009 |
Graphic technology - Process control - Optical, geometrical and metrological requirements for reflection densitometers for graphic arts use 印刷技术 过程控制 印刷用反射密度计的光学、几何学和测量学要求 |
China National Standards meters |
English PDF |
| GB/T 14091-2009 |
Classification of environmental parameters and their severities for machinery-products 机械产品环境参数分类及其严酷程度分级 |
China National Standards meters |
English PDF |
| GB/T 14267-2009 |
Electro-optical distance meters（EDM Instruments） 光电测距仪 |
China National Standards meters |
English PDF |
| GB/T 23714-2009 |
Mechanical vibration and shock - Performance parameters for condition monitoring of structures 机械振动与冲击 结构状态监测的性能参数 |
China National Standards meters |
English PDF |
| GB/T 23583.1-2009 |
Molten steel ladle - Part 1: Types and basic parameters 钢液浇包 第1部分：型式与基本参数 |
China National Standards meters |
English PDF |
| GB/T 23561.9-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 9: Methods for determining the triaxial strength and deformation parameters of coal and rock 煤和岩石物理力学性质测定方法 第9部分：煤和岩石三轴强度及变形参数测定方法 |
China National Standards meters |
English PDF |
| GB/T 23561.8-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 8: Methods for determining the deformation parameters of coal and rock 煤和岩石物理力学性质测定方法 第8部分：煤和岩石变形参数测定方法 |
China National Standards meters |
English PDF |
| GB/T 23480.2-2009 |
Small hole high speed drilling electro-discharge machines - Part 2: Parameters 电火花小孔高速加工机床 第2部分：参数 |
China National Standards meters |
English PDF |
| GB/T 14347-2009 |
Open front mechanical power presses - Types and basic parameters 开式压力机 型式与基本参数 |
China National Standards meters |
English PDF |
| GB/T 3505-2009 |
Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters 产品几何技术规范（GPS） 表面结构 轮廓法 术语、定义及表面结构参数 |
China National Standards meters |
English PDF |
| GB/T 2089-2009 |
Cylindrical coiled compression spring dimensions and parameters 普通圆柱螺旋压缩弹簧尺寸及参数（两端圈并紧磨平或制扁） |
China National Standards meters |
English PDF |
| GB/T 2088-2009 |
Cylindrical coiled tension spring dimensions and parameters 普通圆柱螺旋拉伸弹簧尺寸及参数 |
China National Standards meters |
English PDF |
| GB/T 1031-2009 |
Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values 产品几何技术规范（GPS) 表面结构 轮廓法 表面粗糙度参数及其数值 |
China National Standards meters |
English PDF |
| GB/T 23241-2009 |
Plastics pipes and fittings used for irrigation basic parameters and technical requirements 灌溉用塑料管材和管件基本参数及技术条件 |
China National Standards meters |
English PDF |
| GB/T 5170.21-2008 |
Inspection methods for basic parameters of environmental testing equipments - Hydraulic vibrating type machines for vibration(random) test 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台 |
China National Standards meters |
English PDF |
| GB/T 22787-2008 |
Determination of essential parameters of cryolite for use in fireworks and firecrackers 烟花爆竹用冰晶石关键指标的测定 |
China National Standards meters |
English PDF |
| GB/T 22786-2008 |
Determination of essential parameters of potassium perchlorate for use in fireworks and firecrackers 烟花爆竹用高氯酸钾关键指标的测定 |
China National Standards meters |
English PDF |
| GB/T 22785-2008 |
Determination of essential parameters of aluminum powder for use in fireworks and firecrackers 烟花爆竹用铝粉关键指标的测定 |
China National Standards meters |
English PDF |
| GB/T 22784-2008 |
Determination of essential parameters of aluminum-magnesium alloy powder for use in fireworks and firecrackers 烟花爆竹用铝镁合金粉关键指标的测定 |
China National Standards meters |
English PDF |
| GB/T 22783-2008 |
Determination of essential parameters of potassium nitrate for use in fireworks and firecrackers 烟花爆竹用硝酸钾关键指标的测定 |
China National Standards meters |
English PDF |
| GB/T 22782-2008 |
Determination of essential parameters of cuprum oxide powder for use in fireworks and firecrackers 烟花爆竹用氧化铜关键指标的测定 |
China National Standards meters |
English PDF |
| GB/T 22781-2008 |
Determination of essential parameters of titanium powder for use in fireworks and firecrackers 烟花爆竹用钛粉关键指标的测定 |
China National Standards meters |
English PDF |
| GB/T 22264.5-2008 |
Mounted digital display electric measuring instruments - Part 5: Special requirements for phase meters and power factor meters 安装式数字显示电测量仪表 第5部分：相位表和功率因数表的特殊要求 |
China National Standards meters |
English PDF |
| GB/T 22264.4-2008 |
Mounted digital display electric measuring instruments - Part 4: Special requirements for frequency meters 安装式数字显示电测量仪表 第4部分：频率表的特殊要求 |
China National Standards meters |
English PDF |
| GB/T 22264.3-2008 |
Mounted digital display electric measuring instruments - Part 3: Special requirements for wattmeters and varmeters 安装式数字显示电测量仪表 第3部分：功率表和无功功率表的特殊要求 |
China National Standards meters |
English PDF |
| GB/T 22264.2-2008 |
Mounted digital display electric measuring instruments - Part 2: Special requirements for ammeters and voltmeters 安装式数字显示电测量仪表 第2部分：电流表和电压表的特殊要求 |
China National Standards meters |
English PDF |
| GB/T 22572-2008 |
Surface chemical analysis - Secondary-ion mass spectrometry - Method for estimating depth resolution parameters with multiple delta-layer reference materials 表面化学分析 二次离子质谱 用多δ层参考物质评估深度分辨参数的方法 |
China National Standards meters |
English PDF |
| GB/T 22571-2008 |
Surface chemical analysis ?X-ray photoelectron spectrometers ?Calibration of energy scales 表面化学分析 X射线光电子能谱仪 能量标尺的校准 |
China National Standards meters |
English PDF |
| GB/T 11228-2008 |
Fundamental parameters for kitchens and related equipments in housing 住宅厨房及相关设备基本参数 |
China National Standards meters |
English PDF |
| GB/T 4339-2008 |
Test methods for thermal expansion characteristic parameters of metallic materials 金属材料热膨胀特征参数的测定 |
China National Standards meters |
English PDF |
| GB/T 22414-2008 |
Cranes - Measurement of velocity and time parameters 起重机 速度和时间参数的测量 |
China National Standards meters |
English PDF |
| GB 1003-2008 |
Three phases plugs and socket-outlets for household and similar purposes - Types，basic parameters and dimensions 家用和类似用途三相插头插座 型式、基本参数和尺寸 |
China National Standards meters |
English PDF |
| GB 1002-2008 |
Single phase plugs and socket-outlets for household and similar purposes - Types, basic parameters and dimensions 家用和类似用途单相插头插座 型式、基本参数和尺寸 |
China National Standards meters |
English PDF |
| GB/T 17764-2008 |
Hydrometers - Principles of construction and adjustment 密度计的结构和校准原则 |
China National Standards meters |
English PDF |
| GB/T 4217-2008 |
Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures 流体输送用热塑性塑料管材 公称外径和公称压力 |
China National Standards meters |
English PDF |
| GB/T 13978-2008 |
Digital multimeters 数字多用表 |
China National Standards meters |
English PDF |
| GB/T 1632.5-2008 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5 : Thermoplastic polyester(TP) homopolymers and copolymers 塑料 使用毛细管粘度计测定聚合物稀溶液粘度 第5部分：热塑性均聚和共聚型聚酯(TP) |
China National Standards meters |
English PDF |
| GB/T 22341.1-2008 |
Cupola - Part 1: Types and basic parameters 冲天炉 第1部分：型式和基本参数 |
China National Standards meters |
English PDF |
| GB/T 3927-2008 |
Direct-current potentiometers 直流电位差计 |
China National Standards meters |
English PDF |
| GB/T 22265-2008 |
Direct acting indicating analogue max-demand ammeters 直接作用模拟指示最大需量电流表 |
China National Standards meters |
English PDF |
| GB/T 14913-2008 |
Digital electronic d.c. voltmeters and d.c. electronic analogue-to-digital convertors 直流数字电压表及直流模数转换器 |
China National Standards meters |
English PDF |
| GB/T 22319.8-2008 |
Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units 石英晶体元件参数的测量 第8部分：表面贴装石英晶体元件用测量夹具 |
China National Standards meters |
English PDF |
| GB/T 1632.1-2008 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part1:General principles 塑料 使用毛细管粘度计测定聚合物稀溶液粘度 第1部分：通则 |
China National Standards meters |
English PDF |
| GB/T 17824.3-2008 |
Environmental parameters and environmental management for intensive pig farms 规模猪场环境参数及环境管理 |
China National Standards meters |
English PDF |
| GB/T 9248-2008 |
Methods of evaluating the performance of flowmeters for incompressible fluids 不可压缩流体流量计性能评定方法 |
China National Standards meters |
English PDF |
| GB/T 3235-2008 |
Basic types sizes parameters and characteristies curve of fans 通风机基本型式、尺寸参数及性能曲线 |
China National Standards meters |
English PDF |
| GB/T 8997-2008 |
Calibration for alpha, beta and alpha/beta surface contamination meters and monitors α、β表面污染测量仪与监测仪的校准 |
China National Standards meters |
English PDF |
| GB/T 17215.323-2008 |
Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) 交流电测量设备 特殊要求 第23部分：静止式无功电能表（2级和3级） |
China National Standards meters |
English PDF |
| GB/T 17215.322-2008 |
Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) 交流电测量设备 特殊要求 第22部分：静止式有功电能表（0.2S级和0.5S级） |
China National Standards meters |
English PDF |
| GB/T 17215.321-2008 |
Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) 交流电测量设备 特殊要求 第21部分：静止式有功电能表（1级和2级） |
China National Standards meters |
English PDF |
| GB/T 12572-2008 |
Universal requirements and measurement methods of parameters for radio transmitting equipment 无线电发射设备参数通用要求和测量方法 |
China National Standards meters |
English PDF |
| GB/T 21838.3-2008 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks 金属材料 硬度和材料参数的仪器化压痕试验 第3部分: 标准块的标定 |
China National Standards meters |
English PDF |
| GB/T 21838.2-2008 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines 金属材料 硬度和材料参数的仪器化压痕试验 第2部分: 试验机的检验和校准 |
China National Standards meters |
English PDF |
| GB/T 4861-2008 |
Analogue counting ratemeters - Characteristics and test methods 模拟计数率表 特性和测试方法 |
China National Standards meters |
English PDF |
| GB/T 9751.1-2008 |
Paints and varnishes - Determination of viscosity using rotary viscometers - Part1:Cone-and-plate viscometer operated at a high rate of shear 色漆和清漆 用旋转黏度计测定黏度 第1部分：以高剪切速率操作的锥板黏度计 |
China National Standards meters |
English PDF |
| GB/T 10646-2008 |
Electric heating food ovens - Types and principal parameters 电热食品烤炉型式与主要参数 |
China National Standards meters |
English PDF |
| GB/T 21838.4-2008 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings 金属材料 硬度和材料参数的仪器化压痕试验 第4部分:金属和非金属覆盖层的试验方法 |
China National Standards meters |
English PDF |
| GB/T 21838.1-2008 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method 金属材料 硬度和材料参数的仪器化压痕试验 第1部分:试验方法 |
China National Standards meters |
English PDF |
| GB/T 21785-2008 |
Laboratory glassware - Pyknometers 实验室玻璃器皿 密度计 |
China National Standards meters |
English PDF |
| GB 15082-2008 |
Speed meters for motor vehicle 汽车用车速表 |
China National Standards meters |
English PDF |
| GB/T 21699-2008 |
Verification/Calibration method of rotating-element current meters in straight open tank 直线明槽中的转子式流速仪检定/校准方法 |
China National Standards meters |
English PDF |
| GB/T 4796-2008 |
Classification of environmental conditions of electric and electronic products - Part 1: Environmental parameters and their severities 电工电子产品环境条件分类 第1部分：环境参数及其严酷程度 |
China National Standards meters |
English PDF |
| GB/T 21466.3-2008 |
Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters 稳态条件下流体动压径向滑动轴承 圆形滑动轴承 第3部分：许用的运行参数 |
China National Standards meters |
English PDF |
| GB/T 21457-2008 |
Cranes and related equipment - Accuracy requirements for measuring parameters during testing 起重机和相关设备 试验中参数的测量精度要求 |
China National Standards meters |
English PDF |
| GB/T 21391-2008 |
Measurement of natural gas flow by turbine meters 用气体涡轮流量计测量天然气流量 |
China National Standards meters |
English PDF |
| GB/T 5202-2008 |
Radiation protection instrumentation - Alpha,beta and alpha/beta (beta energy >60keV)contamination meters and monitors 辐射防护仪器 α、β和α／β（β能量大于60keV)污染测量仪与监测仪 |
China National Standards meters |
English PDF |
| GB/T 21417.1-2008 |
Clinical infrared thermometers - part 1: Ear 医用红外体温计 第1部分：耳腔式 |
China National Standards meters |
English PDF |
| GB/T 14318-2008 |
Radiation protection instrumentation - Neutron ambient dose equivalent(rate) meters 辐射防护仪器 中子周围剂量当量（率）仪 |
China National Standards meters |
English PDF |
| GB/T 21293-2007 |
Determination of fiber length and distribution parameters by Almeter method 纤维长度及其分布参数的测定方法 阿尔米特法 |
China National Standards meters |
English PDF |
| GB/T 778.3-2007 |
Measurement of water flow in fully charged closed conduits - meters for cold potable water and hot water - Part 3: Test methods and equipment 封闭满管道中水流量的测量 饮用冷水水表和热水水表 第3部分：试验方法和试验设备 |
China National Standards meters |
English PDF |
| GB/T 778.2-2007 |
Measurement of water flow in fully charged closed conduits - meters for cold potable water and hot water - Part 2: Installation requirements 封闭满管道中水流量的测量 饮用冷水水表和热水水表 第2部分：安装要求 |
China National Standards meters |
English PDF |
| GB/T 778.1-2007 |
Measurement of water flow in fully charged closed conduits - meters for cold potable water and hot water - Part 1: Specifications 封闭满管道中水流量的测量 饮用冷水水表和热水水表 第1部分：规范 |
China National Standards meters |
English PDF |
| GB/T 21246-2007 |
Measurement method for cathodic protection parameters of buried steel pipelines 埋地钢质管道阴极保护参数测量方法 |
China National Standards meters |
English PDF |
| GB/T 17215.301-2007 |
Particular requirements for multi - function electricity meters 多功能电能表 特殊要求 |
China National Standards meters |
English PDF |
| GB/T 3401-2007 |
Determination of the viscosity of Poly(vinyl chloride) resins in dilute solution using capillary viscometers 用毛细管黏度计测定聚氯乙烯树脂稀溶液的黏度 |
China National Standards meters |
English PDF |
| GB/T 12763.5-2007 |
Specifications for oceanographic survey - Part 5: Survey of acoustical and optical parameters in the sea 海洋调查规范 第5部分: 海洋声、光要素调查 |
China National Standards meters |
English PDF |
| GB/T 12763.4-2007 |
Specifications for oceanographic survey - Part 4: Survey of chemical parameters in sea water 海洋调查规范 第4部分: 海水化学要素调查 |
China National Standards meters |
English PDF |
| GB/T 21006-2007 |
Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale 表面化学分析 X射线光电子能谱仪和俄歇电子能谱仪 强度标的线性 |
China National Standards meters |
English PDF |
| GB/T 21014-2007 |
Earth-moving machinery - Hour meters 土方机械 计时表 |
China National Standards meters |
English PDF |
| GB/T 20851.5-2007 |
Electronic toll collection - Dedicated short range communication - Part 5: Test methods of the main parameters in physical layer 电子收费 专用短程通信 第5部分：物理层主要参数测试方法 |
China National Standards meters |
English PDF |
| GB/T 20874-2007 |
Calculation of the effective parameters of magnetic piece parts 磁性零件有效参数的计算 |
China National Standards meters |
English PDF |
| GB/T 5750.9-2006 |
Standard examination methods for drinking water - Pesticides parameters 生活饮用水标准检验方法 农药指标 |
China National Standards meters |
English PDF |
| GB/T 5750.8-2006 |
Standard examination methods for drinking water - Organic parameters 生活饮用水标准检验方法 有机物指标 |
China National Standards meters |
English PDF |
| GB/T 5750.7-2006 |
Standard examination methods for drinking water - Aggregate organic parameters 生活饮用水标准检验方法 有机物综合指标 |
China National Standards meters |
English PDF |
| GB/T 5750.6-2006 |
Standard examination methods for drinking water - Metal parameters 生活饮用水标准检验方法 金属指标 |
China National Standards meters |
English PDF |
| GB/T 5750.5-2006 |
Standard examination methods for drinking water - Nonmetal parameters 生活饮用水标准检验方法 无机非金属指标 |
China National Standards meters |
English PDF |
| GB/T 5750.4-2006 |
Standard examination methods for drinking water - Organoleptic and physical parameters 生活饮用水标准检验方法 感官性状和物理指标 |
China National Standards meters |
English PDF |
| GB/T 5750.13-2006 |
Standard examination methods for drinking water - Radiological parameters 生活饮用水标准检验方法 放射性指标 |
China National Standards meters |
English PDF |
| GB/T 5750.12-2006 |
Standard examination methods for drinking water - Microbiological parameters 生活饮用水标准检验方法 微生物指标 |
China National Standards meters |
English PDF |
| GB/T 5750.10-2006 |
Standard examination methods for drinking Water - Disinfection by-products parameters 生活饮用水标准检验方法 消毒副产物指标 |
China National Standards meters |
English PDF |
| GB/T 9481-2006 |
Axial-flow pump of medium-small size - Types and basic parameters 中小型轴流泵 型式与基本参数 |
China National Standards meters |
English PDF |
| GB/T 20726-2006 |
Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors 半导体探测器X射线能谱仪通则 |
China National Standards meters |
English PDF |
| GB/T 20729-2006 |
Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length 封闭管道中导电液体流量的测量 法兰安装电磁流量计 总长度 |
China National Standards meters |
English PDF |
| GB/T 20728-2006 |
Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters 封闭管道中流体流量的测量 科里奥利流量计的选型、安装和使用指南 |
China National Standards meters |
English PDF |
| GB/T 20727-2006 |
Measurement of fluid flow in closed conduits - Thermal mass flowmeters 封闭管道中流体流量的测量 热式质量流量计 |
China National Standards meters |
English PDF |
| GB/T 20471-2006 |
Condition monitoring and diagnostics of machines - General guidelines on using performance parameters 机器状态监测与诊断 基于应用性能参数的一般指南 |
China National Standards meters |
English PDF |
| GB/T 20318-2006 |
Fused Deposition Modeling machines - Parameters 熔融沉积快速成形机床 参数 |
China National Standards meters |
English PDF |
| GB/T 10429-2006 |
Single-stage centripetal turbine torque converters―Types and basic parameters 单级向心涡轮液力变矩器 型式和基本参数 |
China National Standards meters |
English PDF |
| GB/T 20427-2006 |
Height setting micrometers and riser blocks 可调高度测微仪及其垫高块 |
China National Standards meters |
English PDF |
| GB/T 16850.4-2006 |
Basic specification for optical fibre amplifier test methods - Part 4: Test methods for analogue parameters - Gain slope 光纤放大器试验方法基本规范 第4部分:模拟参数－增益斜率的试验方法 |
China National Standards meters |
English PDF |
| GB/T 3871.5-2006 |
Agricultural tractors - Test procedures - Part 5: Turning and clearance diameters 农业拖拉机 试验规程 第5部分：转向圆和通过圆直径 |
China National Standards meters |
English PDF |
| GB/T 3871.2-2006 |
Agricultural tractors - Test procedures - Part 2: Measurements of tractor parameters 农业拖拉机 试验规程 第2部分：整机参数测量 |
China National Standards meters |
English PDF |
| GB/T 15445.2-2006 |
Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions 粒度分析结果的表述 第2部分：由粒度分布计算平均粒径/直径和各次矩 |
China National Standards meters |
English PDF |
| GB 12514.4-2006 |
Fire coupling - Part 4: Patterns and basic parameters for fire screw-type coupling 消防接口 第4部分：螺纹式消防接口型式和基本参数 |
China National Standards meters |
English PDF |
| GB 12514.3-2006 |
Fire coupling - Part 3: Patterns and basic parameters for fire insertion-type coupling 消防接口 第3部分：卡式消防接口型式和基本参数 |
China National Standards meters |
English PDF |
| GB 12514.2-2006 |
Fire coupling - Part 2: Patterns and basic parameters for fire snap-types coupling 消防接口 第2部分：内扣式消防接口型式和基本参数 |
China National Standards meters |
English PDF |
| GB/T 17286.4-2006 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 4: Guide for operators of pipe provers 液态烃动态测量 体积计量流量计检定系统 第4部分：体积管操作人员指南 |
China National Standards meters |
English PDF |
| GB/T 19982-2005 |
Woodworking machines-Diameters of spindles for receiving circular sawblades 木工机床 安装圆锯片处的主轴直径 |
China National Standards meters |
English PDF |
| GB/T 20012-2005 |
Medical electrical equipment -- Dose area product meters 医用电气设备 剂量面积乘积仪 |
China National Standards meters |
English PDF |
| GB/T 5170.18-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments 电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备 |
China National Standards meters |
English PDF |
| GB/T 5170.20-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Water testing equipments 电工电子产品环境试验设备 基本参数检定方法 水试验设备 |
China National Standards meters |
English PDF |
| GB/T 5170.19-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined temperature/vibration(Sinusoidal)testing equipments 电工电子产品环境试验设备 基本参数检定方法 温度/振动(正弦)综合试验设备 |
China National Standards meters |
English PDF |
| GB/T 5170.17-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined sequential cold low air pressure And damp heat testing equipments 电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备 |
China National Standards meters |
English PDF |
| GB/T 10593.1-2005 |
Measuring methods of environmental parameters for electric and electronic products Part 1:Vibration 电工电子产品环境参数测量方法 第1部分：振 动 |
China National Standards meters |
English PDF |
| GB/T 3452.1-2005 |
Fluid power systems-O-rings-Part 1:Inside diameters,cross-sections,tolerances and size identification code 液压气动用O形橡胶密封圈 第1部分:尺寸系列及公差 |
China National Standards meters |
English PDF |
| GB/T 2351-2005 |
Fluid power systems and components-Connectors and associated components-Nominal outside diameters of tubes and nominal inside diameters of hoses 液压气动系统用硬管外径和软管内径 |
China National Standards meters |
English PDF |
| GB/T 1973.3-2005 |
Small cylindrically coiled compression spring—Dimensions and parameters 小型圆柱螺旋压缩弹簧尺寸及参数 |
China National Standards meters |
English PDF |
| GB/T 1973.2-2005 |
Small cylindrically coiled tension spring—Dimensions and parameters 小型圆柱螺旋拉伸弹簧尺寸及参数 |
China National Standards meters |
English PDF |
| GB/T 514-2005 |
Specification for liquid-in-glass thermometers for testing of petroleum products 石油产品试验用玻璃液体温度计技术条件 |
China National Standards meters |
English PDF |
| GB/T 7925-2005 |
Wire electrical-discharge machines(Reciprocating traveling type)-Parameters 电火花线切割机（往复走丝型）参数 |
China National Standards meters |
English PDF |
| GB/T 14412-2005 |
Mechanical vibration and shock-Mechanical mounting of accelerometers 机械振动与冲击 加速度计的机械安装 |
China National Standards meters |
English PDF |
| GB/T 5170.16-2005 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Centrifugal machines for constant acceleration test 电工电子产品环境试验设备 基本参数检定方法 稳态加速度试验用离心机 |
China National Standards meters |
English PDF |
| GB/T 5170.15-2005 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products hydraulic vibrating type machines for vibration(sinusoidal)test 电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用液压振动台 |
China National Standards meters |
English PDF |
| GB/T 5170.13-2005 |
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Mechanical vibrating type machines for vibration(sinusoidal)test 电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用机械振动台 |
China National Standards meters |
English PDF |
| GB/T 19629-2005 |
Medical Electrical Equipment-Dosimeters with ionization chambers and/or semi-conductors as used in X-ray diagnostic imaging 医用电气设备 X射线诊断影像中使用的电离室和(或)半导体探测器剂量计 |
China National Standards meters |
English PDF |
| GB/T 7234-2004 |
Geometrical Product Specifications(GPS)--Measurement of roundness--Terms，definitions and parameters of roundness 产品几何量技术规范(GPS) 圆度测量 术语、定义及参数 |
China National Standards meters |
English PDF |
| GB/T 7220-2004 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Surfaceroughness--Terminology--Measurement of surface roughness parameters 产品几何量技术规范(GPS) 表面结构 轮廓法 表面粗糙度 术语 参数测量 |
China National Standards meters |
English PDF |
| GB/T 18375.6-2004 |
Prosthetics--Structural testing of lower-limb prostheses--Part 6:Loading parameters of supplementary structural tests 假肢 下肢假肢的结构检验 第6部分:辅助结构检验中的加载参数 |
China National Standards meters |
English PDF |
| GB/T 17245-2004 |
Inertial parameters of adult human body 成年人人体惯性参数 |
China National Standards meters |
English PDF |
| GB/T 8177-2004 |
Internal micrometers with two-point contact 两点内径千分尺 |
China National Standards meters |
English PDF |
| GB/T 6314-2004 |
Internal micrometers with three-point contact 三爪内径千分尺 |
China National Standards meters |
English PDF |
| GB/T 4267-2004 |
Rotating tools with parallel shanks--Diameters of shanks and sizes of driving squares 直柄回转工具 柄部直径和传动方头的尺寸 |
China National Standards meters |
English PDF |
| GB/T 12162.3-2004 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy--Part 3:Calibration of area and personal dosemeters and the measurement of their response as a function of en 用于校准剂量仪和剂量率仪及确定其能量响应的 X和γ参考辐射 第3部分:场所剂量仪和个人剂量计的校准及其能量响应和角响应的测定 |
China National Standards meters |
English PDF |
| GB/T 12162.2-2004 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy--Part 2:Dosimetry for radiation protection over the energy ranges 8keV to 1.3 MeV and 4MeV to 9MeV 用于校准剂量仪和剂量率仪及确定其能量响应的 X和γ参考辐射 第2部分:辐射防护用的能量范围为 8keV～1.3MeV 和 4MeV～9MeV 的参考辐射的剂量测定 |
China National Standards meters |
English PDF |
| GB/T 3166-2004 |
Parameters for hot water boilers 热水锅炉参数系列 |
China National Standards meters |
English PDF |
| GB/T 1921-2004 |
Parameters for industrial steam boilers 工业蒸汽锅炉参数系列 |
China National Standards meters |
English PDF |
| GB/T 5290.2-2003 |
Die sinking electro-discharge machines(EDM)----Parameters----Part 2:Two column machines (Slide-head type and cross slide table type) 电火花成形机 参数 第2部分:双立柱机床 (移动主轴头型和十字工作台型) |
China National Standards meters |
English PDF |
| GB 19377-2003 |
Parameters for degradation，sandification and salification of rangelands 天然草地退化、沙化、盐渍化的分级指标 |
China National Standards meters |
English PDF |
| GB/T 11685-2003 |
Measurement procedures for semiconductor X-ray detector system and semiconductor X-ray energyspectrometers 半导体X射线探测器系统和半导体X射线能谱仪的测量方法 |
China National Standards meters |
English PDF |
| GB 9706.21-2003 |
Medical electrical equipment--Part 2: Particular requirements for the safety of patient contact dosemeters used in radiotherapy with electrically connected radiation detectors 医用电气设备 第2部分:用于放射治疗与患者接触且具有电气连接辐射探测器的剂量计的安全专用要求 |
China National Standards meters |
English PDF |
| GB/T 12472-2003 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Surface roughness parameters and their values for wooden pieces 产品几何量技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度参数及其数值 |
China National Standards meters |
English PDF |
| GB/T 8456-2003 |
Textile machinery--Knitting machines--Nominal diameters of circular machines 纺织机械 针织机 圆机的公称直径 |
China National Standards meters |
English PDF |
| GB/T 18940-2003 |
Measurement of gas flow in closedconduits--Turbine meters 封闭管道中气体流量的测量 涡轮流量计 |
China National Standards meters |
English PDF |
| GB/T 15284-2002 |
Particular requirements for multi-rate electricity meters 多费率电能表 特殊要求 |
China National Standards meters |
English PDF |
| GB/T 15757-2002 |
Geometrical product specifications(GPS)--Surface imperfections--Terms，definitions and parameters 产品几何量技术规范(GPS) 表面缺陷 术语、定义及参数 |
China National Standards meters |
English PDF |
| GB/T 18685-2002 |
The bar diameters for rolling general purpose metric screw threads 搓、滚制普通螺纹前的毛坯直径 |
China National Standards meters |
English PDF |
| GB/T 18660-2002 |
Measurement of conductive liquid flow in closed conduits--Method using electromagnetic flowmeters 封闭管道中导电液体流量的测量 电磁流量计的使用方法 |
China National Standards meters |
English PDF |
| GB/T 18659-2002 |
Measurement of fluid flow in closed conduits--Methods of evaluating the performance of electromagnetic flow-meters for liquids 封闭管道中导电液体流量的测量 电磁流量计的性能评定方法 |
China National Standards meters |
English PDF |
| GB/T 12160-2002 |
Calibration of extensometers used in uniaxial testing 单轴试验用引伸计的标定 |
China National Standards meters |
English PDF |
| GB/T 18520-2001 |
Equipment for crop protection--Sprayers--Connecting dimensions for nozzles and manometers 植物保护机械 喷雾机 喷头和压力表的连接尺寸 |
China National Standards meters |
English PDF |
| GB/T 18460.3-2001 |
Pre-payment vending system using integrated circuit(s)cards with contacts--Part 3:Pre-payment elect-ricity meters IC卡预付费售电系统 第3部分:预付费电度表 |
China National Standards meters |
English PDF |
| GB/T 16850.6-2001 |
Basic specification for optical fibre amplifier test methods--Part 6:Test methods for pump leakage parameters 光纤放大器试验方法基本规范 第6部分:泵浦泄漏参数的试验方法 |
China National Standards meters |
English PDF |
| Find out:476Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
