Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 41929-2022 |
plastics - epoxy resins - test methods {译} 塑料 环氧树脂 试验方法 |
China National Standards plastic |
 English PDF |
| GB/T 41931-2022 |
plastics/Rubber Polymer Dispersions and Synthetic Rubber Latex Freeze-Thaw Cycle Stability Test {译} 塑料/橡胶 聚合物分散体和合成橡胶胶乳 冻融循环稳定性试验 |
China National Standards plastic |
English PDF |
| GB/T 41935-2022 |
plastics - Artificial weathering with acid deposits {译} 塑料 含酸性沉积的人工气候老化 |
China National Standards plastic |
English PDF |
| GB/T 41932-2022 |
plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) method {译} 塑料 断裂韧性（GIC和KIC）的测定 线弹性断裂力学（LEFM）法 |
China National Standards plastic |
English PDF |
| GB/T 41933-2022 |
plastics - Determination of tension-tension fatigue crack growth - Linear elastic fracture mechanics (LEFM) method {译} 塑料 拉-拉疲劳裂纹扩展的测定 线弹性断裂力学(LEFM)法 |
China National Standards plastic |
English PDF |
| GB/T 41934-2022 |
plastics - Determination of vertical flame spread of films and sheets {译} 塑料 薄膜和薄片垂直火焰蔓延的测定 |
China National Standards plastic |
English PDF |
| GB/T 2406.3-2022 |
plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test {译} 塑料 用氧指数法测定燃烧行为 第3部分：高温试验 |
China National Standards plastic |
English PDF |
| GB/T 11546.2-2022 |
plastics - Determination of creep properties - Part 2: Three-point bending creep {译} 塑料 蠕变性能的测定 第2部分:三点弯曲蠕变 |
China National Standards plastic |
English PDF |
| GB/T 19466.5-2022 |
plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve temperature, time, enthalpy of reaction and conversion {译} 塑料 差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间，反应焓和转化率的测定 |
China National Standards plastic |
English PDF |
| GB/T 41936.2-2022 |
plastics - Determination of torsional rigidity of flexible materials - Part 2: Plasticized vinyl chloride homopolymers and copolymers {译} 塑料 柔性材料扭转刚度的测定 第2部分: 增塑氯乙烯均聚物和共聚物 |
China National Standards plastic |
English PDF |
| GB/T 41936.1-2022 |
plastics - Determination of torsional stiffness of flexible materials - Part 1: General method {译} 塑料 柔性材料扭转刚度的测定 第1部分:通用方法 |
China National Standards plastic |
English PDF |
| GB/T 33061.11-2022 |
plastics - Determination of dynamic mechanical properties - Part 11: Glass transition temperature {译} 塑料 动态力学性能的测定 第11部分: 玻璃化转变温度 |
China National Standards plastic |
English PDF |
| GB/T 41937-2022 |
Rubber or plastics coated fabrics-Physical-mechanical property tests-Determination of flex resistance by deflectionometer method {译} 橡胶或塑料涂覆织物 物理机械性能试验 挠度仪法测定耐曲挠性 |
China National Standards plastic |
English PDF |
| GB/T 41758.1-2022 |
plastics - Polyketone (PK) molding and extrusion materials - Part 1: Nomenclature system and basis of classification {译} 塑料 聚酮（PK）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards plastic |
English PDF |
| GB/T 41874-2022 |
plastic Polyphenylene ether (PPE) resin {译} 塑料 聚苯醚（PPE）树脂 |
China National Standards plastic |
English PDF |
| GB/T 41873-2022 |
plastic Polyether ether ketone (PEEK) resin {译} 塑料 聚醚醚酮（PEEK）树脂 |
China National Standards plastic |
English PDF |
| GB/T 1038.2-2022 |
plastics - Films and sheets - Test methods for gas permeability - Part 2: Equal pressure method {译} 塑料制品 薄膜和薄片 气体透过性试验方法 第2部分：等压法 |
China National Standards plastic |
English PDF |
| GB/T 1038.1-2022 |
plastics - Films and sheets - Test methods for gas permeability - Part 1: Differential pressure method {译} 塑料制品 薄膜和薄片 气体透过性试验方法 第1部分：差压法 |
China National Standards plastic |
English PDF |
| GB/T 41792-2022 |
plastics - Films and sheets - Determination of cold cracking temperature {译} 塑料制品 薄膜和薄片 冷裂温度的测定 |
China National Standards plastic |
English PDF |
| GB/T 41791-2022 |
plastics Films and sheets Non-oriented polyethylene terephthalate (PET) sheet {译} 塑料制品 薄膜和薄片 无取向聚对苯二甲酸乙二醇酯（PET）片材 |
China National Standards plastic |
English PDF |
| GB/T 41682-2022 |
Determination of headspace gas content in food plastic packaging containers - sensor method {译} 食品塑料包装容器中顶空气体含量的测定 传感器法 |
China National Standards plastic |
English PDF |
| GB/T 21239-2022 |
Test method for compressive properties of fiber reinforced plastic laminates after impact {译} 纤维增强塑料层合板冲击后压缩性能试验方法 |
China National Standards plastic |
English PDF |
| GB/T 1844.3-2022 |
plastics - Symbols and abbreviations - Part 3: Plasticizers {译} 塑料 符号和缩略语 第3部分：增塑剂 |
China National Standards plastic |
English PDF |
| GB/T 1844.2-2022 |
plastics - Symbols and abbreviations - Part 2: Fillers and reinforcing materials {译} 塑料 符号和缩略语 第2部分：填料和增强材料 |
China National Standards plastic |
English PDF |
| GB/T 41709-2022 |
Carbon fiber reinforced plastics - Determination of size and aspect ratio of pulverized material {译} 碳纤维增强塑料 粉碎料尺寸和长宽比的测定 |
China National Standards plastic |
English PDF |
| GB/T 24135-2022 |
Rubber or plastics coated fabrics - Accelerated aging test {译} 橡胶或塑料涂覆织物 加速老化试验 |
China National Standards plastic |
English PDF |
| GB/T 1844.1-2022 |
plastics - Symbols and abbreviations - Part 1: Base polymers and their characteristic properties {译} 塑料 符号和缩略语 第1部分：基础聚合物及其特征性能 |
China National Standards plastic |
English PDF |
| GB/T 41877.1-2022 |
plastics - Ethylene-vinyl alcohol (EVOH) copolymer molding and extrusion materials - Part 1: Nomenclature system and basis of classification {译} 塑料 乙烯-乙烯醇（EVOH）共聚物模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards plastic |
English PDF |
| GB/T 41877.2-2022 |
plastics - Ethylene-vinyl alcohol (EVOH) copolymer molding and extrusion materials - Part 2: Specimen preparation and property determination {译} 塑料 乙烯-乙烯醇（EVOH）共聚物模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards plastic |
English PDF |
| GB/T 41878-2022 |
plastics - Determination of scratch properties {译} 塑料 划痕性能的测定 |
China National Standards plastic |
English PDF |
| GB/T 41879-2022 |
plastics - Burning behavior - Medium-scale fire tests of fiber-reinforced polymer composites {译} 塑料 燃烧性能 纤维增强聚合物复合材料的中等尺寸耐火测试 |
China National Standards plastic |
English PDF |
| GB/T 41762.2-2022 |
Fiber reinforced plastic composites - Determination of through-thickness properties of laminates - Part 2: Determination of elastic modulus, strength and Weibull size effect of carbon fiber unidirectional laminates by bending tests {译} 纤维增强塑料复合材料 层合板厚度方向性能的测定 第2部分：弯曲试验测定碳纤维单向层合板的弹性模量、强度和威布尔尺寸效应 |
China National Standards plastic |
English PDF |
| GB/T 41880-2022 |
plastics - epoxy resins - determination of electrical conductivity of aqueous extracts {译} 塑料 环氧树脂 水萃取液电导率的测定 |
China National Standards plastic |
English PDF |
| GB/T 3517-2022 |
Natural raw rubber - Determination of plasticity retention (PRI) {译} 天然生胶 塑性保持率（PRI）的测定 |
China National Standards plastic |
English PDF |
| GB/T 41758.2-2022 |
plastics - Polyketone (PK) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties {译} 塑料 聚酮（PK）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards plastic |
English PDF |
| GB/T 40611-2021 |
plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/ sandy sediment interface—Method by measuring the oxygen demand in closed respirometer 塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定密闭呼吸计内耗氧量的方法 |
China National Standards plastic |
English PDF |
| GB/T 40440-2021 |
plastics—Extruded sheets of impact-modified acrylonitrile-styrene copolymers(ABS,AEPDS and ASA)—Requirements and test methods 塑料制品 抗冲击改性丙烯腈-苯乙烯共聚物(ABS、AEPDS和ASA)挤出板材 要求和试验方法 |
China National Standards plastic |
English PDF |
| GB/T 40384-2021 |
plastics—Determination of the transient extensional viscosity of polymer melts 塑料 聚合物熔体瞬态拉伸黏度的测定 |
China National Standards plastic |
English PDF |
| GB/T 40426.3-2021 |
plastics—Decorative solid surfacing materials—Part 3:Determination of properties—Non-sheet solid surfacing material 塑料制品 装饰性实体面材 第3部分：性能的测定 非板型实体面材 |
China National Standards plastic |
English PDF |
| GB/T 40426.2-2021 |
plastics—Decorative solid surfacing materials—Part 2: Determination of properties—Sheet solid surfacing material 塑料制品 装饰性实体面材 第2部分：性能的测定 板型实体面材 |
China National Standards plastic |
English PDF |
| GB/T 40426.1-2021 |
plastics—Decorative solid surfacing materials—Part 1: Classification and specifications 塑料制品 装饰性实体面材 第1部分：分类和规范 |
China National Standards plastic |
English PDF |
| GB/T 40402-2021 |
Pre-insulated composite plastic pipes with polyethylene casing 聚乙烯外护管预制保温复合塑料管 |
China National Standards plastic |
English PDF |
| GB/T 40367-2021 |
plastics—Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment—Method by analysis of evolved carbon dioxide 塑料 暴露于海洋沉积物中非漂浮材料最终需氧生物分解能力的测定 通过分析释放的二氧化碳的方法 |
China National Standards plastic |
English PDF |
| GB/T 40340-2021 |
Composites and metal assemblies—Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres—Salt spray tests 复合材料与金属组合件 碳纤维增强聚合物基复合材料胶接或紧固件连接结构人工环境下的电偶腐蚀试验 盐雾试验 |
China National Standards plastic |
English PDF |
| GB/T 40322-2021 |
Thermoplastic elastomer—Specifications of door sealmaterials for household and similar refrigerating appliances 热塑性弹性体 家用和类似用途制冷器具用门密封材料规范 |
China National Standards plastic |
English PDF |
| GB/T 40318-2021 |
plastics—Environmental aspects—General guidelines for their inclusion in standards 塑料 环境因素 标准中环境因素的通则 |
China National Standards plastic |
English PDF |
| GB/T 40315-2021 |
plastics—Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value 塑料 采用水溶液保持湿度恒定进行状态调节和试验的小密闭容器 |
China National Standards plastic |
English PDF |
| GB/T 40302-2021 |
plastics—Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source 塑料 立式软薄试样与小火焰源接触的燃烧性能测定 |
China National Standards plastic |
English PDF |
| GB/T 40280-2021 |
plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method 塑料 液态或乳液态或分散体系的树脂 用单筒旋转黏度计测定表观黏度 |
China National Standards plastic |
English PDF |
| GB/T 39715.4-2021 |
plastics—Biobased content—Part 4: Determination of biobased mass content 塑料 生物基含量 第4部分：生物基物质含量的测定 |
China National Standards plastic |
English PDF |
| GB/T 39715.3-2021 |
plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content 塑料 生物基含量 第3部分：生物基合成聚合物含量的测定 |
China National Standards plastic |
English PDF |
| GB/T 39715.2-2021 |
plastics—Biobased content—Part 2: Determination of biobased carbon content 塑料 生物基含量 第2部分：生物基碳含量的测定 |
China National Standards plastic |
English PDF |
| GB/T 39715.1-2021 |
plastics—Biobased content—Part 1: General principles 塑料 生物基含量 第1部分：通用原则 |
China National Standards plastic |
English PDF |
| GB/T 37199.1-2021 |
plastics—Polybutene(PB) moulding and extrusion materials—Part 1：Designation system and basis for specifications 塑料 聚丁烯（PB）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards plastic |
English PDF |
| GB/T 33047.3-2021 |
plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics 塑料 聚合物热重法（TG） 第3部分：使用 Ozawa-Friedman 绘图测定活化能和分析反应动力学 |
China National Standards plastic |
English PDF |
| GB/T 33047.2-2021 |
plastics—Thermogravimetry (TG) of polymers—Part 2: Determination of activation energy 塑料 聚合物热重法（TG） 第2部分：活化能的测定 |
China National Standards plastic |
English PDF |
| GB/T 29047-2021 |
Prefabricated directly buried insulating pipes and fittings with polyurethane foamed-plastics and high density polyethylene casing pipes 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件 |
China National Standards plastic |
English PDF |
| GB/T 15596-2021 |
plastics—Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources 塑料 在玻璃过滤后太阳辐射、自然气候或实验室辐射源暴露后颜色和性能变化的测定 |
China National Standards plastic |
English PDF |
| GB/T 2408-2021 |
plastics—Determination of burning characteristics—Horizontal and vertical test 塑料 燃烧性能的测定 水平法和垂直法 |
China National Standards plastic |
English PDF |
| GB/T 1845.2-2021 |
plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料 聚乙烯（PE）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards plastic |
English PDF |
| GB/T 40612-2021 |
plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface—Method by analysis of evolved carbon dioxide 塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定释放二氧化碳的方法 |
China National Standards plastic |
English PDF |
| GB/T 40553-2021 |
plastics—Specifications for plastics suitable for home composting 塑料 适合家庭堆肥塑料技术规范 |
China National Standards plastic |
English PDF |
| GB/T 40146-2021 |
Determination of plastic microbead in cosmetics 化妆品中塑料微珠的测定 |
China National Standards plastic |
English PDF |
| GB/T 40182-2021 |
Guideline of determining plasticized materials in toys or parts of toys that can be placed in the mouth 玩具中塑化材料及可放入口中产品的判定指南 |
China National Standards plastic |
English PDF |
| GB/T 40266-2021 |
Quality general rules of oxides barrier transparent plastics laminated films and pouches for food packaging 食品包装用氧化物阻隔透明塑料复合膜、袋质量通则 |
China National Standards plastic |
English PDF |
| GB/T 40237-2021 |
Test method for ignitability of foamed plastic—Welding spark method 泡沫塑料着火性试验方法 电焊火花法 |
China National Standards plastic |
English PDF |
| GB/T 40224-2021 |
plastics boxes used for rainwater infiltration,attenuation and storage 雨水渗透、调蓄、储存用塑料模块 |
China National Standards plastic |
English PDF |
| GB/T 40120-2021 |
Agricultural irrigation equipment—Thermoplastic collapsible hoses for irrigation—Specifications and test methods 农业灌溉设备 灌溉用热塑性可折叠软管 技术规范和试验方法 |
China National Standards plastic |
English PDF |
| GB/T 40006.3-2021 |
plastics—Recycled plastics—Part 3:Polypropylene(PP) materials 塑料 再生塑料 第3部分：聚丙烯(PP)材料 |
China National Standards plastic |
English PDF |
| GB/T 40006.2-2021 |
plastics—Recycled plastics—Part 2:Polyethylene(PE) materials 塑料 再生塑料 第2部分：聚乙烯(PE)材料 |
China National Standards plastic |
English PDF |
| GB/T 40006.1-2021 |
plastics—Recycled plastic—Part 1:General rules 塑料 再生塑料 第1部分：通则 |
China National Standards plastic |
English PDF |
| GB/T 28897-2021 |
Steel-plastic compound pipes and fittings for fluid service 流体输送用钢塑复合管及管件 |
China National Standards plastic |
English PDF |
| GB/T 39997-2021 |
Thermoplastic pipework for underground installation at petrol filling stations 加油站埋地用热塑性塑料复合管道系统 |
China National Standards plastic |
English PDF |
| GB/T 39937-2021 |
plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods 塑料制品 聚丙烯(PP)挤塑板材 要求和试验方法 |
China National Standards plastic |
English PDF |
| GB/T 39936-2021 |
plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods 深冷保冷用泡沫塑料 |
China National Standards plastic |
English PDF |
| GB/T 39935-2021 |
plastics—Film and sheeting—Determination of blocking resistance 塑料制品 薄膜和片材 抗粘连性的测定 |
China National Standards plastic |
English PDF |
| GB/T 39934-2021 |
plastics—Film and sheeting—Determination of blocking resistance 家具中挥发性有机化合物的筛查检测方法 气相色谱-质谱法 |
China National Standards plastic |
English PDF |
| GB/T 39827.2-2021 |
plastics -- Post-consumer poly(ethylene terephthalate)(PET) bottle recyclates -- Part 2: Preparation of test specimens and determination properties 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分：试样制备和性能测定 |
China National Standards plastic |
English PDF |
| GB/T 39827.1-2021 |
plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 1: Designation system and basis for specifications 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第1部分：命名系统和分类基础 |
China National Standards plastic |
English PDF |
| GB/T 39822-2021 |
plastics—Determination of yellowness index and change in yellowness index 塑料 黄色指数及其变化值的测定 |
China National Standards plastic |
English PDF |
| GB/T 39821-2021 |
plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel 塑料 不能从规定漏斗流出的模塑材料表观密度的测定 |
China National Standards plastic |
English PDF |
| GB/T 39818-2021 |
plastics—Thermosetting moulding materials—Determination of shrinkage 塑料 热固性模塑材料 收缩率的测定 |
China National Standards plastic |
English PDF |
| GB/T 39812-2021 |
plastics—Preparation of test specimens by machining 塑料 试样的机加工制备 |
China National Standards plastic |
English PDF |
| GB/T 39743-2021 |
Plain bearings—Thermoplastic bushes—Dimensions and tolerance 滑动轴承 热塑性塑料轴套 尺寸与公差 |
China National Standards plastic |
English PDF |
| GB/T 39693.3-2021 |
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale 硫化橡胶或热塑性橡胶 硬度的测定 第3部分：用超低橡胶硬度（VLRH）标尺 测定定试验力硬度 |
China National Standards plastic |
English PDF |
| GB/T 10006-2021 |
plastics—Film and sheeting—Determination of the coefficients of friction 塑料 薄膜和薄片 摩擦系数的测定 |
China National Standards plastic |
English PDF |
| GB/T 41003.2-2021 |
General technical specification for plastic foam mats—Part 2: Indoor polyvinyl chloride foam mats 塑料泡沫垫通用技术条件 第2部分：室内聚氯乙烯泡沫垫 |
China National Standards plastic |
English PDF |
| GB/T 41004.2-2021 |
Intelligent pipe network system-Part 2 :Intelligent plastic pipes , fittings and valves 智能管网系统 第2部分：智能塑料管材、管件及阀门 |
China National Standards plastic |
English PDF |
| GB/T 3681.2-2021 |
plastics—Methods of exposure to solar radiation—Part 2: Direct weathering and exposure behind window glass 塑料 太阳辐射暴露试验方法 第2部分：直接自然气候老化和暴露在窗玻璃后气候老化 |
China National Standards plastic |
English PDF |
| GB/T 3681.1-2021 |
plastics—Methods of exposure to solar radiation—Part 1: General guidance 塑料 太阳辐射暴露试验方法 第1部分：总则 |
China National Standards plastic |
English PDF |
| GB/T 41003.1-2021 |
General technical specification for plastic foam mats—Part 1:Polyethylene/ethylene vinylacetate copolymer foam mats for children 塑料泡沫垫通用技术条件 第1部分：聚乙烯/乙烯-醋酸乙烯酯共聚物儿童泡沫垫 |
China National Standards plastic |
English PDF |
| GB/T 41048-2021 |
Technical requirements for plastics inspection chamber and manhole for urban drainage 城镇排水用塑料检查井技术要求 |
China National Standards plastic |
English PDF |
| GB/T 41169-2021 |
Paper, aluminum foil and plastic laminated film and pouch for food packaging 食品包装用纸铝塑复合膜、袋 |
China National Standards plastic |
English PDF |
| GB/T 41168-2021 |
plastics and aluminum foil laminated retort film and pouch for food packaging 食品包装用塑料与铝箔蒸煮复合膜、袋 |
China National Standards plastic |
English PDF |
| GB/T 41061-2021 |
Test methods for creep properties of fiber reinforced plastics 纤维增强塑料蠕变性能试验方法 |
China National Standards plastic |
English PDF |
| GB/T 24282-2021 |
plastics—Determination of xylene-soluble matter fraction in polypropylene 塑料 聚丙烯中二甲苯可溶物含量的测定 |
China National Standards plastic |
English PDF |
| GB 14232.4-2021 |
plastics collapsible containers for human blood and blood components—Part 4: Aphaeresis blood bag systems with integrated features 人体血液及血液成分袋式塑料容器 第4部分：含特殊组件的单采血袋系统 |
China National Standards plastic |
English PDF |
| GB/T 41010-2021 |
Degradability and identification requirements of biodegradable plastics and products 生物降解塑料与制品降解性能及标识要求 |
China National Standards plastic |
English PDF |
| GB/T 1037-2021 |
Test method for water vapor transmission of plastic film and sheet—Desiccant method and water method 塑料薄膜与薄片水蒸气透过性能测定 杯式增重与减重法 |
China National Standards plastic |
English PDF |
| GB/T 40933-2021 |
plastics—Film and sheeting—Guidance on the testing of thermoplastic films 塑料制品 薄膜和薄片 热塑性塑料薄膜试验指南 |
China National Standards plastic |
English PDF |
| GB/T 40911.3-2021 |
plastics—Poly(methyl methacrylate) sheets—Types,dimensions and characteristics—Part 3:Continuous cast sheets 塑料制品 聚甲基丙烯酸甲酯板材 类型、尺寸和特性 第3部分：连续浇铸板材 |
China National Standards plastic |
English PDF |
| GB/T 40911.2-2021 |
plastics—Poly(methyl methacrylate)sheets—Types,dimensions and characteristics—Part 2:Extruded sheets 塑料制品 聚甲基丙烯酸甲酯板材 类型、尺寸和特性 第2部分：挤出板材 |
China National Standards plastic |
English PDF |
| GB/T 40937-2021 |
plastic piping systems—Determination of long-term strength for plastic composite pipes and fittings 塑料管道系统 塑料复合管材和管件长期强度的测定方法 |
China National Standards plastic |
English PDF |
| GB/T 40918-2021 |
General technical requirements of polystyrene wood-imitation plastic board for outdoor application 聚苯乙烯户外仿木板材通用技术要求 |
China National Standards plastic |
English PDF |
| GB/T 41001-2021 |
Melamine plastic tableware 密胺塑料餐饮具 |
China National Standards plastic |
English PDF |
| GB/T 40726-2021 |
Rubber-or plastics-coated fabrics—Determination of fogging characteristics of trim materials in the interior of automobiles 橡胶或塑料涂覆织物 汽车内饰材料雾化性能的测定 |
China National Standards plastic |
English PDF |
| GB/T 30314-2021 |
Rubber- or plastics-coated fabrics—Determination of abrasion resistance—Taber abrader 橡胶或塑料涂覆织物 耐磨性的测定 泰伯法 |
China National Standards plastic |
English PDF |
| GB/T 18426-2021 |
Rubber-or plastics-coated fabrics—Low-temperature bend test 橡胶或塑料涂覆织物 低温弯曲试验 |
China National Standards plastic |
English PDF |
| GB/T 40006.9-2021 |
plastics—Recycled plastics—Part 9:Poly(ethylene terephthalate) (PET) materials 塑料 再生塑料 第9部分：聚对苯二甲酸乙二醇酯(PET)材料 |
China National Standards plastic |
English PDF |
| GB/T 40006.8-2021 |
plastics—Recycled plastics—Part 8: Polyamide (PA) materials 塑料 再生塑料 第8部分：聚酰胺(PA)材料 |
China National Standards plastic |
English PDF |
| GB/T 40006.7-2021 |
plastics—Recycled plastics—Part 7: Polycarbonate(PC) materials 塑料 再生塑料 第7部分：聚碳酸酯(PC)材料 |
China National Standards plastic |
English PDF |
| GB/T 40006.6-2021 |
plastics—Recycled plastics—Part 6: Polystyrene（PS）and impact-resistant polystyrene(PS-I) materials 塑料 再生塑料 第6部分：聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）材料 |
China National Standards plastic |
English PDF |
| GB/T 40006.5-2021 |
plastics—Recycled plastics—Part 5：Acrylonitrile-butadiene-styrene (ABS) materials 塑料 再生塑料 第5部分：丙烯腈-丁二烯-苯乙烯（ABS）材料 |
China National Standards plastic |
English PDF |
| GB/T 19789-2021 |
Packaging material—Test method for oxygen gas permeability characteristics of plastic film and sheeting—Coulometric sensor 包装材料 塑料薄膜和薄片氧气透过性试验 库仑计检测法 |
China National Standards plastic |
English PDF |
| GB/T 9142-2021 |
Specification of plastic-steel bilayer self-lubricating materials—Part 1：Running-in layer with modified PTFE tape 建筑施工机械与设备 混凝土搅拌机 |
China National Standards plastic |
English PDF |
| GB/T 40719-2021 |
Rubber,vulcanized or themoplastic—Determination of volume and/or surface resistivity 硫化橡胶或热塑性橡胶 体积和/或表面电阻率的测定 |
China National Standards plastic |
English PDF |
| GB/T 39693.9-2021 |
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers 硫化橡胶或热塑性橡胶 硬度的测定 第9部分：硬度计的校准和验证 |
China National Standards plastic |
English PDF |
| GB/T 40872-2021 |
plastics—Test methods of polyethylene cellular 塑料 聚乙烯泡沫试验方法 |
China National Standards plastic |
English PDF |
| GB/T 40797-2021 |
Rubber, vulcanized or thermoplastic -- Determination of resistance to abrasion -- Driven, vertical abrasive disc method 硫化橡胶或热塑性橡胶 耐磨性能的测定 垂直驱动磨盘法 |
China National Standards plastic |
English PDF |
| GB/T 22271.2-2021 |
plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards plastic |
English PDF |
| GB/T 13542.2-2021 |
plastic films for electrical purposes—Part 2:Methods of test 电气绝缘用薄膜 第2部分：试验方法 |
China National Standards plastic |
English PDF |
| GB/T 22271.1-2021 |
plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 1: Designation system and basis for specification 塑料 聚甲醛（POM）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards plastic |
English PDF |
| GB/T 10457-2021 |
General requirement of plastic self-cling wrap film for keeping food fresh 食品用塑料自粘保鲜膜质量通则 |
China National Standards plastic |
English PDF |
| GB/T 39506-2020 |
Determination of the poly vinyl chloride (PVC) content of unplasticized poly vinyl chloride (PVC-U) pipes and fittings—Method based on total chlorine content 硬聚氯乙烯（PVC-U）管材及管件中聚氯乙烯（PVC）含量的测定 基于总氯含量的方法 |
China National Standards plastic |
English PDF |
| GB/T 21661-2020 |
plastic shopping bags 塑料购物袋 |
China National Standards plastic |
English PDF |
| GB/T 39142.1-2020 |
Specification of plastic-steel bilayer self-lubricating materials—Part 1：Running-in layer with modified PTFE tape 塑料－钢背二层粘接复合自润滑板材技术条件 第1部分：带改性聚四氟乙烯（PTFE）减摩层的板材 |
China National Standards plastic |
English PDF |
| GB/T 39171-2020 |
Technical specification for waste plastics recycling 废塑料回收技术规范 |
China National Standards plastic |
English PDF |
| GB/T 39072-2020 |
Regulation for artificial bed-log production of plastic bag cultured white jelly fungus 袋栽银耳菌棒生产规范 |
China National Standards plastic |
English PDF |
| GB 14232.1-2020 |
plastics collapsible containers for human blood and blood components—Part 1: Conventional containers 人体血液及血液成分袋式塑料容器 第1部分：传统型血袋 |
China National Standards plastic |
English PDF |
| GB/T 8813-2020 |
Rigid cellular plastics—Determination of compression properties 硬质泡沫塑料 压缩性能的测定 |
China National Standards plastic |
English PDF |
| GB/T 24451-2020 |
Low resilience flexible polyurethane cellular plastics 慢回弹软质聚氨酯泡沫塑料 |
China National Standards plastic |
English PDF |
| GB/T 39041-2020 |
Carbon steel-fiber reinforced plastic clad bars for reinforcement concrete 钢筋混凝土用碳素钢-纤维增强复合材料复合钢筋 |
China National Standards plastic |
English PDF |
| GB/T 38737-2020 |
plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production 塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法 |
China National Standards plastic |
English PDF |
| GB/T 38725.2-2020 |
Spoolable reinforced plastic pipe一Part 2: Fiber reinforced thermoplastic coiled pipe 可盘绕式增强塑料管 第2部分：纤维增强热塑性塑料连续管 |
China National Standards plastic |
English PDF |
| GB/T 38787-2020 |
plastics—Methods for the preparation of samples for biodegradation testing of plastic materials 塑料 材料生物分解试验用样品制备方法 |
China National Standards plastic |
English PDF |
| GB/T 38757-2020 |
Specifications for facility agricultural microclimate observation—Heliogreenhouse and plastic tunnel 设施农业小气候观测规范 日光温室和塑料大棚 |
China National Standards plastic |
English PDF |
| GB/T 38687-2020 |
Rubber and plastics machinery—Communicating protocol for auxiliary equipment 橡胶塑料机械 外围设备通信协议 |
China National Standards plastic |
English PDF |
| GB/T 25156-2020 |
General specifications and inspection methods of rubber and plastics injection moulding machines 橡胶塑料注射成型机通用技术要求及检测方法 |
China National Standards plastic |
English PDF |
| GB/T 9330-2020 |
plastic insulated control cables 塑料绝缘控制电缆 |
China National Standards plastic |
English PDF |
| GB/T 38727-2020 |
Biodegradable plastic films and bags for express logistics transportation and delivery 全生物降解物流快递运输与投递用包装塑料膜、袋 |
China National Standards plastic |
English PDF |
| GB/T 38533-2020 |
Injection moulding machines for rubber and plastics—Mould fixing and connection dimensions 橡胶塑料注射成型机 模具固定和联接尺寸 |
China National Standards plastic |
English PDF |
| GB/T 38463-2020 |
General specification for ultra-clean plastic bottle filling machine 超洁净塑料瓶灌装设备通用技术要求 |
China JB-Machinery Industry Standards plastic |
English PDF |
| GB/T 35840.4-2020 |
Steels for plastic mould—Part 4: Pre-hardenging steel plate 塑料模具钢 第4部分：预硬化钢板 |
China National Standards plastic |
English PDF |
| GB/T 39714.2-2020 |
plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties 塑料 聚四氟乙烯(PTFE)半成品 第2部分：试样制备和性能测定 |
China National Standards plastic |
English PDF |
| GB/T 39714.1-2020 |
plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 1:Requirements and designation 塑料 聚四氟乙烯(PTFE)半成品 第1部分：要求和命名 |
China National Standards plastic |
English PDF |
| GB/T 39690.2-2020 |
plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第2部分：试样制备和性能测定 |
China National Standards plastic |
English PDF |
| GB/T 39690.1-2020 |
plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 1: Designation system and basis for specification 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第1部分： 命名系统和分类基础 |
China National Standards plastic |
English PDF |
| GB/T 17037.5-2020 |
plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy 塑料 热塑性塑料材料注塑试样的制备 第5部分：各向异性评估用标准试样的制备 |
China National Standards plastic |
English PDF |
| GB/T 17037.2-2020 |
plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars 塑料 热塑性塑料材料注塑试样的制备 第2部分：小拉伸试样 |
China National Standards plastic |
English PDF |
| GB/T 6036-2020 |
Rubber,vulcanized or thermoplastic—Determination of low-temperature stiffening(Gehman test) 硫化橡胶或热塑性橡胶 低温刚性的测定（吉门试验） |
China National Standards plastic |
English PDF |
| GB/T 1632.4-2020 |
plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分：聚碳酸酯(PC)模塑和挤出材料 |
China National Standards plastic |
English PDF |
| GB/T 39697.2-2020 |
Rubber or plastics covered rollers—Specifications—Part 2：Surface characteristics 橡胶或塑料包覆辊 规范 第2部分：表面特性 |
China National Standards plastic |
English PDF |
| GB/T 39697.1-2020 |
Rubber or plastics covered rollers—Specifications—Part 1: Requirements for hardness 橡胶或塑料包覆辊 规范 第1部分：硬度要求 |
China National Standards plastic |
English PDF |
| GB/T 39693.6-2020 |
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 6: Apparent hardness of rubber-covered rollers by IRHD method 硫化橡胶或热塑性橡胶 硬度的测定 第6部分：IRHD法测定胶辊的表观硬度 |
China National Standards plastic |
English PDF |
| GB/T 39692-2020 |
Rubber,vulcanized or thermoplastic—Low temperature testing—General introduction and guide 硫化橡胶或热塑性橡胶 低温试验 概述与指南 |
China National Standards plastic |
English PDF |
| GB/T 39691-2020 |
plastics—Determination of refractive index 塑料 折光率的测定 |
China National Standards plastic |
English PDF |
| GB/T 39483.2-2020 |
Rubber and plastics injection moulding machine—Interface—Part 2:Data exchange interface 橡胶塑料注射成型机 接口 第2部分：数据交换接口 |
China National Standards plastic |
English PDF |
| GB/T 29734.3-2020 |
Energy-saving windows and doors for buildings—Part 3: Steel-plastic complex windows and doors 建筑用节能门窗 第3部分:钢塑复合门窗 |
China JG - Building Industry Standards plastic |
English PDF |
| GB/T 39389-2020 |
plastic composite hose for gas welding，cutting and allied processes 气体焊接、切割和类似作业用复合塑料软管 |
China National Standards plastic |
English PDF |
| GB/T 39385-2020 |
plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility 塑料管道系统 热塑性塑料管材 环柔性的测定 |
China National Standards plastic |
English PDF |
| GB/T 39383-2020 |
Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints 埋地用无压热塑性塑料管道系统 弹性密封圈接头的密封性能试验方法 |
China National Standards plastic |
English PDF |
| GB/T 39382-2020 |
Thermoplastics piping systems for soil and waste discharge inside buildings—Test method for airtightness of joints 建筑内排水排污用热塑性塑料管道系统 接头气密性试验方法 |
China National Standards plastic |
English PDF |
| GB/T 39379-2020 |
Thermoplastics piping systems for non-pressure applications—Test method for watertightness 无压热塑性塑料管道系统 水密性试验方法 |
China National Standards plastic |
English PDF |
| GB/T 39328-2020 |
Additive manufacturing—Specification for material extrusion process of plastic materials 增材制造 塑料材料挤出成形工艺规范 |
China National Standards plastic |
English PDF |
| GB/T 24508-2020 |
Wood-plastic composite flooring 木塑地板 |
China National Standards plastic |
English PDF |
| GB/T 20674.4-2020 |
plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 4: Traceability coding 塑料管材和管件 聚乙烯系统熔接设备 第4部分：可追溯编码 |
China National Standards plastic |
English PDF |
| GB/T 20674.3-2020 |
plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 3:Operator's badge 塑料管材和管件 聚乙烯系统熔接设备 第3部分：操作者代码 |
China National Standards plastic |
English PDF |
| GB/T 20674.2-2020 |
plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 2: Electrofusion 塑料管材和管件 聚乙烯系统熔接设备 第2部分：电熔连接 |
China National Standards plastic |
English PDF |
| GB/T 20674.1-2020 |
plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 1:Butt fusion 塑料管材和管件 聚乙烯系统熔接设备 第1部分：热熔对接 |
China National Standards plastic |
English PDF |
| GB/T 18997.2-2020 |
plastic/aluminum/ plastic composite pressure pipes—Part 2: Composite pipes butt-welded by aluminum pipe 铝塑复合压力管 第2部分：铝管对接焊式铝塑管 |
China National Standards plastic |
English PDF |
| GB/T 18997.1-2020 |
plastic/aluminum/plastic composite pressure pipes—Part 1: Composite pipes overlap-welded by aluminum pipe 铝塑复合压力管 第1部分：铝管搭接焊式铝塑管 |
China National Standards plastic |
English PDF |
| GB/T 18252-2020 |
plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度 |
China National Standards plastic |
English PDF |
| GB/T 39395-2020 |
Test method for buckling resistance of the thermoplastics inspection chamber bases 热塑性塑料检查井井座抗压失稳试验方法 |
China National Standards plastic |
English PDF |
| GB/T 39490-2020 |
Test method for liquid impingement erosion resistance of fiber-reinforced plastics—Rotating apparatus method 纤维增强塑料液体冲击抗侵蚀性试验方法 旋转装置法 |
China National Standards plastic |
English PDF |
| GB/T 39484-2020 |
Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 |
China National Standards plastic |
English PDF |
| GB/T 39483.1-2020 |
Rubber and plastics injection moulding machine—Interface —Part 1: Mechanical and electrical interface 橡胶塑料注射成型机 接口 第1部分：机械和电气接口 |
China National Standards plastic |
English PDF |
| GB/T 39327-2020 |
Rubber and plastics hoses for marine-engine wet-exhaust systems—Specification 船用发动机湿式排气系统用橡胶和塑料软管 规范 |
China National Standards plastic |
English PDF |
| GB/T 39311-2020 |
Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification 热塑性软管和软管组合件 液压用钢丝或合成纱线增强单一压力型 规范 |
China National Standards plastic |
English PDF |
| GB/T 39307-2020 |
Fluorescent whitening agents—Determination of shade and relative whiteness—plastic coloring 荧光增白剂 色光和增白强度的测定 塑料着色法 |
China National Standards plastic |
English PDF |
| GB/T 39289-2020 |
Determination of the adhesion strength—plastic and metal 胶粘剂粘接强度的测定 金属与塑料 |
China National Standards plastic |
English PDF |
| GB/T 39249-2020 |
Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验 |
China National Standards plastic |
English PDF |
| GB/T 39248-2020 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification 输送液化石油气和液化天然气用热塑性塑料多层（非硫化）软管及软管组合件 规范 |
China National Standards plastic |
English PDF |
| GB/T 36805.2-2020 |
plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method 塑料 高应变速率下的拉伸性能测定 第2部分：直接测试法 |
China National Standards plastic |
English PDF |
| GB/T 15593-2020 |
plasticized poly(vinyl chloride) compounds for transfusion (infusion) equipment 输血(液)器具用聚氯乙烯塑料 |
China National Standards plastic |
English PDF |
| GB/T 14905-2020 |
Rubber and plastics hoses—Determination of adhesion between components 橡胶和塑料软管 各层间粘合强度的测定 |
China National Standards plastic |
English PDF |
| GB/T 12585-2020 |
Rubber, vulcanized or thermoplastic—Rubber sheets and rubber-coated fabrics—Determination of transmission rate of volatile liquids (gravimetric technique) 硫化橡胶或热塑性橡胶 橡胶片材和橡胶涂覆织物 挥发性液体透过速率的测定（质量法） |
China National Standards plastic |
English PDF |
| GB/T 39415.2-2020 |
Packaging sacks—Method of specifications for characteristics—Part 2: Sacks made from thermoplastic flexible film 包装袋 特征性能规范方法 第2部分：热塑性软质薄膜袋 |
China National Standards plastic |
English PDF |
| GB 51352-2019 |
Engineering technical standard for fiber reinforced plastics chimney 纤维增强塑料排烟筒工程技术标准 |
China National Standards plastic |
English PDF |
| GB/T 38079-2019 |
Starch-based plastic shopping bags + No.1 modification sheet 淀粉基塑料购物袋+《第1号修改单》 |
China National Standards plastic |
English PDF |
| GB/T 38295-2019 |
Limits for lead, cadmium, hexavalent chromium, mercury in plastic materials 塑料材料中铅、镉、六价铬、汞限量 |
China National Standards plastic |
English PDF |
| GB/T 38292-2019 |
Determination of mercury in plastic materials 塑料材料中汞含量的测定 |
China National Standards plastic |
English PDF |
| GB/T 38291-2019 |
Determination of lead in plastic materials 塑料材料中铅含量的测定 |
China National Standards plastic |
English PDF |
| GB/T 38290-2019 |
Determination of cadmium in plastic materials 塑料材料中镉含量的测定 |
China National Standards plastic |
English PDF |
| GB/T 38288-2019 |
plastics—Recycled polypropylene compound 塑料 聚丙烯再生改性专用料 |
China National Standards plastic |
English PDF |
| GB/T 38287-2019 |
Determination of hexavalent chromium in plastic materials 塑料材料中六价铬含量的测定 |
China National Standards plastic |
English PDF |
| GB/T 38273.2-2019 |
plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分：试样制备和性能测定 |
China National Standards plastic |
English PDF |
| GB/T 38273.1-2019 |
plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分：命名系统和分类基础 |
China National Standards plastic |
English PDF |
| GB/T 38271-2019 |
plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography 塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）中残留苯乙烯单体含量的测定 气相色谱法 |
China National Standards plastic |
English PDF |
| GB/T 37188.3-2019 |
plastics—Acquisition and presentation of comparable multipoint data—Part 3:Environmental influences on properties 塑料 可比多点数据的获得和表示 第3部分：环境对性能的影响 |
China National Standards plastic |
English PDF |
| GB/T 37188.1-2019 |
plastics—Acquisition and presentation of comparable multipoint data—Part 1: Mechanical properties 塑料 可比多点数据的获得和表示 第1部分：机械性能 |
China National Standards plastic |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
