Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43618-2023 |
Non-destructive testing process tower gamma ray sCANning method {译} 无损检测 工艺塔伽马射线扫描方法 |
China National Standards CAN |
 English PDF |
| GB/T 14196.3-2023 |
InCANdescent lamps safety regulations part 3: tungsten halogen lamps (for non-motor vehicles) {译} 白炽灯 安全规范 第3部分：卤钨灯（非机动车辆用） |
China National Standards CAN |
English PDF |
| GB/T 14196.2-2023 |
InCANdescent lamps - Safety regulations - Part 2: Tungsten halogen lamps for general lighting in households and similar places {译} 白炽灯 安全规范 第2部分：家庭和类似场合普通照明用卤钨灯 |
China National Standards CAN |
English PDF |
| GB/T 14196.1-2023 |
InCANdescent lamps - Safety regulations - Part 1: Tungsten filament lamps for general lighting in homes and similar places {译} 白炽灯 安全规范 第1部分：家庭和类似场合普通照明用钨丝灯 |
China National Standards CAN |
English PDF |
| GB/T 24403-2023 |
General rules for quality of CANned tuna {译} 金枪鱼罐头质量通则 |
China National Standards CAN |
English PDF |
| GB/T 13516-2023 |
General rules for quality of CANned peaches {译} 桃罐头质量通则 |
China National Standards CAN |
English PDF |
| GB/T 3510-2023 |
Determination of plasticity of unvulCANized rubber - Rapid plastometer method {译} 未硫化橡胶 塑性的测定 快速塑性计法 |
China National Standards CAN |
English PDF |
| GB 31610.3-2023 |
National food safety standards: Inspection of Angiostrongylus CANtonensis in animal aquatic products and their products {译} 食品安全国家标准 动物性水产品及其制品中广州管圆线虫的检验 |
China National Standards CAN |
English PDF |
| GB/Z 43193-2023 |
Nanotechnology Elements of research on toxiCANt metabolism kinetics of nanomaterials {译} 纳米技术 纳米材料毒物代谢动力学研究要素 |
China National Standards CAN |
English PDF |
| GB/T 43196-2023 |
Nanotechnology SCANning electron microscopy to measure nanoparticle size and shape distribution {译} 纳米技术 扫描电子显微术测量纳米颗粒粒度及形状分布 |
China National Standards CAN |
English PDF |
| GB/T 42659-2023 |
Surface chemical analysis SCANning probe microscopy Determination of geometric quantities using scanning probe microscopy: Calibration of measurement systems {译} 表面化学分析 扫描探针显微术 采用扫描探针显微镜测定几何量：测量系统校准 |
China National Standards CAN |
English PDF |
| GB/T 42967-2023 |
Guidelines for Anti-food Waste Work in CANteens of Institutions {译} 机关食堂反食品浪费工作指南 |
China National Standards CAN |
English PDF |
| GB/T 42519-2023 |
Rubber Standard Reference Elastomers (SREs) for characterizing the effect of liquids on vulCANized rubber {译} 橡胶 用于表征液体对硫化橡胶影响的标准参比弹性体（SREs） |
China National Standards CAN |
English PDF |
| GB/T 23698-2023 |
General requirements for 3D sCANning anthropometric methods {译} 三维扫描人体测量方法的一般要求 |
China National Standards CAN |
English PDF |
| GB/T 42613-2023 |
Plain bearings - Tests for bearing materials - Resistance to corrosion by lubriCANts under static conditions {译} 滑动轴承 轴承材料试验 静态条件下抗润滑剂腐蚀能力 |
China National Standards CAN |
English PDF |
| GB/T 42543-2023 |
Surface Chemical Analysis SCANning Probe Microscopy Determination of the Normal Elastic Constant of a Cantilever Beam {译} 表面化学分析 扫描探针显微术 悬臂梁法向弹性常数的测定 |
China National Standards CAN |
English PDF |
| GB/T 22461.2-2023 |
Surface chemical analysis - Vocabulary Part 2: SCANning probe microscopy terminology {译} 表面化学分析 词汇 第2部分： 扫描探针显微术术语 |
China National Standards CAN |
English PDF |
| GB/T 39248-2020 |
Specification for thermoplastic multi-layer (non-vulCANized) hose and hose assemblies for conveying liquefied petroleum gas and liquefied natural gas "No. 1 Amendment" {译} 输送液化石油气和液化天然气用热塑性塑料多层（非硫化）软管及软管组合件 规范《第1号修改单》 |
China National Standards CAN |
English PDF |
| GB/T 30020-2023 |
Glass defect detection method Photoelastic sCANning method {译} 玻璃缺陷检测方法 光弹扫描法 |
China National Standards CAN |
English PDF |
| GB/T 42386-2023 |
CANdle term {译} 蜡烛术语 |
China National Standards CAN |
English PDF |
| GB/T 42385-2023 |
CANdle fire safety code {译} 蜡烛 防火安全规范 |
China National Standards CAN |
English PDF |
| GB 7300.902-2022 |
Feed Additives-Part 9: Colorants β,β-Carotene-4,4-dione (CANthaxanthin) {译} 饲料添加剂 第9部分：着色剂 β，β-胡萝卜素-4,4-二酮 (斑蝥黄) |
China National Standards CAN |
English PDF |
| GB/T 14151-2022 |
General rules for the quality of CANned edible mushrooms {译} 食用菌罐头质量通则 |
China National Standards CAN |
English PDF |
| GB/T 41588.4-2022 |
Road vehicles - Controller area network (CAN) - Part 4: Time-triggered communication {译} 道路车辆 控制器局域网（CAN） 第4部分：时间触发通信 |
China National Standards CAN |
English PDF |
| GB/T 41588.3-2022 |
Road vehicles - Controller area network (CAN) - Part 3: Low-speed fault-tolerant, media-dependent interfaces {译} 道路车辆 控制器局域网（CAN） 第3部分：低速容错、媒介相关接口 |
China National Standards CAN |
English PDF |
| GB/T 41588.2-2022 |
Road vehicles - Controller area network (CAN) - Part 2: High speed media access unit {译} 道路车辆 控制器局域网（CAN） 第2部分：高速媒介访问单元 |
China National Standards CAN |
English PDF |
| GB/T 41588.1-2022 |
Road vehicles - Controller area network (CAN) - Part 1: Data link layer and physical signaling {译} 道路车辆 控制器局域网（CAN） 第1部分：数据链路层和物理信令 |
China National Standards CAN |
English PDF |
| GB/T 41522-2022 |
Three detection methods of CANine disease virus gene chip {译} 三种犬病病毒基因芯片检测方法 |
China National Standards CAN |
English PDF |
| GB/T 32280-2022 |
Test method for warp and bow of silicon wafers—Automated non-contact sCANning method 硅片翘曲度和弯曲度的测试 自动非接触扫描法 |
China National Standards CAN |
English PDF |
| GB/T 20278-2022 |
Information security technology—Security technical requirements and testing assessment approaches for network vulnerability sCANners 信息安全技术 网络脆弱性扫描产品安全技术要求和测试评价方法 |
China National Standards CAN |
English PDF |
| GB/T 21675-2022 |
AfriCAN Horse Sickness Diagnostic Technology {译} 非洲马瘟诊断技术 |
China National Standards CAN |
English PDF |
| GB/T 41958-2022 |
Dipped CANvas - Test method for thermal conductivity {译} 浸胶帆布 导热性能试验方法 |
China National Standards CAN |
English PDF |
| GB/T 42010-2022 |
Quality requirements for packaging containers and milk powder CANs {译} 包装容器 奶粉罐质量要求 |
China National Standards CAN |
English PDF |
| GB/T 42279-2022 |
VulCANized or thermoplastic rubber Determination of tensile set at constant elongation and determination of tensile set, elongation and creep at constant tensile load {译} 硫化橡胶或热塑性橡胶 在恒定伸长率下测定拉伸永久变形及在恒定拉伸载荷下测定拉伸永久变形、伸长率和蠕变 |
China National Standards CAN |
English PDF |
| GB/T 42278-2022 |
VulCANized rubber - Determination of hot tensile stress {译} 硫化橡胶 热拉伸应力的测定 |
China National Standards CAN |
English PDF |
| GB/T 39693.8-2022 |
VulCANized rubber or thermoplastic rubber - Determination of hardness - Part 8: Determination of apparent hardness of rubber rollers by Zhao's hardness (P&J) method {译} 硫化橡胶或热塑性橡胶 硬度的测定 第8部分：赵氏硬度（P&J)法测定胶辊的表观硬度 |
China National Standards CAN |
English PDF |
| GB/T 39693.7-2022 |
VulCANized rubber or thermoplastic rubber - Determination of hardness - Part 7: Determination of the apparent hardness of rubber rollers by the Shore hardness method {译} 硫化橡胶或热塑性橡胶 硬度的测定 第7部分：邵氏硬度法测定胶辊的表观硬度 |
China National Standards CAN |
English PDF |
| GB/T 33523.604-2022 |
Product Geometry Specification (GPS) Surface Structure Area Method Part 604: Nominal Characteristics of Non-Contact (Coherent SCANning Interferometry) Type Instruments {译} 产品几何技术规范（GPS） 表面结构 区域法 第604部分：非接触（相干扫描干涉）式仪器的标称特性 |
China National Standards CAN |
English PDF |
| GB/T 41945-2022 |
Rubber and vulCANizate - Determination of metal content by inductively coupled plasma optical emission spectrometry (ICP-OES) {译} 生胶和硫化胶 用电感耦合等离子体发射光谱仪(ICP-OES)测定金属含量 |
China National Standards CAN |
English PDF |
| GB/T 41941-2022 |
VulCANized rubber - Determination of fatigue crack growth rate {译} 硫化橡胶 疲劳裂纹扩展速率的测定 |
China National Standards CAN |
English PDF |
| GB/T 42122-2022 |
VulCANized rubber or thermoplastic rubber - Determination of abrasion resistance (modified Lamborn abrasion tester method) {译} 硫化橡胶或热塑性橡胶 耐磨性能的测定（改进型兰伯恩磨耗试验机法） |
China National Standards CAN |
English PDF |
| GB/T 42257-2022 |
Chromium-erbium co-doped yttrium-sCANdium-gallium garnet crystal optical and laser performance measurement method {译} 铬铒共掺钇钪镓石榴石晶体光学及激光性能测量方法 |
China National Standards CAN |
English PDF |
| GB/T 41928-2022 |
Plastics epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential sCANning calorimetry (DSC) {译} 塑料 环氧树脂 差示扫描量热法（DSC）测定交联环氧树脂交联度 |
China National Standards CAN |
English PDF |
| GB/T 19466.5-2022 |
Plastics - Differential sCANning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve temperature, time, enthalpy of reaction and conversion {译} 塑料 差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间，反应焓和转化率的测定 |
China National Standards CAN |
English PDF |
| GB/T 40905.2-2022 |
Textiles - Quantitative analysis of cashmere, sheep wool, other special animal fibers and their mixtures - Part 2: SCANning electron microscopy {译} 纺织品 山羊绒、绵羊毛、其他特种动物纤维及其混合物定量分析 第2部分：扫描电镜法 |
China National Standards CAN |
English PDF |
| GB/T 13212-2022 |
General rules for the quality of CANned water chestnuts (horseshoes) {译} 荸荠（马蹄）罐头质量通则 |
China National Standards CAN |
English PDF |
| GB/T 41897-2022 |
Quality requirements for food desicCANt {译} 食品用干燥剂质量要求 |
China National Standards CAN |
English PDF |
| GB/T 41900-2022 |
CANned food code {译} 罐头食品代号 |
China National Standards CAN |
English PDF |
| GB/T 10786-2022 |
Inspection method of CANned food {译} 罐头食品的检验方法 |
China National Standards CAN |
English PDF |
| GB/T 30834-2022 |
Evaluation and statistics of non-metallic inclusions in steel - SCANning electron microscopy {译} 钢中非金属夹杂物的评定和统计 扫描电镜法 |
China National Standards CAN |
English PDF |
| GB/T 14215-2021 |
General quality requirements for CANned tomato paste 番茄酱罐头质量通则 |
China National Standards CAN |
English PDF |
| GB/T 13214-2021 |
General quality requirements for CANned beef and canned mutton 牛肉类、羊肉类罐头质量通则 |
China National Standards CAN |
English PDF |
| GB/T 40452-2021 |
Intravenous infusion technical specification of CANine and feline 犬、猫静脉输液操作技术规范 |
China National Standards CAN |
English PDF |
| GB/T 40450-2021 |
Practice technical specification of CANine restraint 犬保定操作技术规范 |
China National Standards CAN |
English PDF |
| GB/T 40449-2021 |
Technical specification of CANine and feline sterilization operation 犬、猫绝育手术操作技术规范 |
China National Standards CAN |
English PDF |
| GB/T 40430-2021 |
Road vehicles—Diagnostic communication over controller area network（DoCAN）—Dictionary 道路车辆 基于控制器局域网的诊断通信 符号集 |
China National Standards CAN |
English PDF |
| GB/T 40361-2021 |
Beer, carbonated beverage CANs filling production line—General technical specifications 啤酒、碳酸饮料易拉罐灌装生产线 通用技术规范 |
China National Standards CAN |
English PDF |
| GB/T 40360-2021 |
Still beverage metal CANs filling and sealing machine—General technical specifications 不含气饮料金属罐灌装封罐机 通用技术条件 |
China National Standards CAN |
English PDF |
| GB/T 40339-2021 |
Corrosion of metals and alloys—Guidelines for assessing the signifiCANces of stress corrosion cracks detected in service 金属和合金的腐蚀 服役中检出的应力腐蚀裂纹的重要性评估导则 |
China National Standards CAN |
English PDF |
| GB/T 40319-2021 |
Wrought aluminum alloy sheets, strips and foils for drawn CANs 拉深罐用铝合金板、带、箔材 |
China National Standards CAN |
English PDF |
| GB/T 24402-2021 |
General quality requirements for CANned frying mud carps 鲮鱼罐头质量通则 |
China National Standards CAN |
English PDF |
| GB/T 40182-2021 |
Guideline of determining plasticized materials in toys or parts of toys that CAN be placed in the mouth 玩具中塑化材料及可放入口中产品的判定指南 |
China National Standards CAN |
English PDF |
| GB/T 40271-2021 |
Test method for identification of textile fibers—Differential sCANningcalorimetry(DSC) 纺织纤维鉴别试验方法 差示扫描量热法（DSC） |
China National Standards CAN |
English PDF |
| GB/T 40141-2021 |
Detection and identification of CANdidatus Phytoplasma ulmi 榆韧皮部坏死植原体检疫鉴定方法 |
China National Standards CAN |
English PDF |
| GB/T 18916.54-2021 |
Norm of water intake - Part 54: CANned food 取水定额 第54部分：罐头食品 |
China National Standards CAN |
English PDF |
| GB/T 39884-2021 |
Examination methods for three components in CANnabis in suspected drugs - Gas chromatography and gas chromatography-mass spectrometry 疑似毒品中大麻三种成分检验 气相色谱和气相色谱-质谱法 |
China National Standards CAN |
English PDF |
| GB/T 39945-2021 |
Method of heat penetration test for CANned food 罐藏食品热穿透测试规程 |
China National Standards CAN |
English PDF |
| GB/T 39756-2021 |
General specification for the sCANning voice reading machine 扫描式语音读书机通用技术条件 |
China National Standards CAN |
English PDF |
| GB/T 39851.2-2021 |
Road vehicles—Diagnostic communication over Controller Area Network (DoCAN) —Part 2:Transport protocol and network layer services 道路车辆 基于控制器局域网的诊断通信 第2部分：传输层协议和网络层服务 |
China National Standards CAN |
English PDF |
| GB/T 39821-2021 |
Plastics—Determination of apparent density of moulding material that CANnot be poured from a specified funnel 塑料 不能从规定漏斗流出的模塑材料表观密度的测定 |
China National Standards CAN |
English PDF |
| GB/T 39693.3-2021 |
Rubber, vulCANized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale 硫化橡胶或热塑性橡胶 硬度的测定 第3部分：用超低橡胶硬度（VLRH）标尺 测定定试验力硬度 |
China National Standards CAN |
English PDF |
| GB/T 8643-2021 |
Determination of lubriCANt content in lubricated metal-powder mixes—Soxhlet extraction method 含润滑剂金属粉末中润滑剂含量的测定 索格利特（Soxhlet）萃取法 |
China National Standards CAN |
English PDF |
| GB/T 41077-2021 |
Thermal insulating products for building applications—Limit value of hexabromocyclododeCANes 建筑用绝热制品 六溴环十二烷的限值 |
China National Standards CAN |
English PDF |
| GB/T 1037-2021 |
Test method for water vapor transmission of plastic film and sheet—DesicCANt method and water method 塑料薄膜与薄片水蒸气透过性能测定 杯式增重与减重法 |
China National Standards CAN |
English PDF |
| GB/T 19545.5-2021 |
Assistive products for walking，manipulated by one arm—Requirements and test methods—Part 5: Walking sticks and CANes with seat 单臂操作助行器具 要求和试验方法 第5部分:带座手杖 |
China National Standards CAN |
English PDF |
| GB/T 40833-2021 |
Determination of p-coumaric acid in sugarCANe rinds—High performance liquid chromatography 甘蔗皮渣中对香豆酸检测方法 高效液相色谱法 |
China National Standards CAN |
English PDF |
| GB/T 29614-2021 |
VulCANized rubber—Determination the content of polycyclic aromatic hydrocarbons 硫化橡胶 多环芳烃含量的测定 |
China National Standards CAN |
English PDF |
| GB/T 40719-2021 |
Rubber,vulCANized or themoplastic—Determination of volume and/or surface resistivity 硫化橡胶或热塑性橡胶 体积和/或表面电阻率的测定 |
China National Standards CAN |
English PDF |
| GB/T 39693.9-2021 |
Rubber, vulCANized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers 硫化橡胶或热塑性橡胶 硬度的测定 第9部分：硬度计的校准和验证 |
China National Standards CAN |
English PDF |
| GB/T 40720-2021 |
Rubber,vulCANized rubber—Determination of insulation resistance 硫化橡胶 绝缘电阻的测定 |
China National Standards CAN |
English PDF |
| GB/T 40797-2021 |
Rubber, vulCANized or thermoplastic -- Determination of resistance to abrasion -- Driven, vertical abrasive disc method 硫化橡胶或热塑性橡胶 耐磨性能的测定 垂直驱动磨盘法 |
China National Standards CAN |
English PDF |
| GB/T 1232.3-2021 |
Rubber,unvulCANized—Determinations using a shearing-disc viscometer—Part 3:Determination of the Delta Mooney value for non-pigmented,oil-extended emulsion-polymerized SBR 未硫化橡胶 用圆盘剪切黏度计进行测定 第3部分：无填料的充油乳液聚合型苯乙烯-丁二烯橡胶Delta门尼值的测定 |
China National Standards CAN |
English PDF |
| GB/T 1687.4-2021 |
Rubber,vulCANized—Determination of temperature rise and resistance to fatigue in flexometer testing—Part 4: Constant-stress flexometer 硫化橡胶 在屈挠试验中温升和耐疲劳性能的测定 第4部分：恒应力屈挠试验 |
China National Standards CAN |
English PDF |
| GB/T 25036-2021 |
Children’s CANvas rubber footwear 布面童胶鞋 |
China National Standards CAN |
English PDF |
| GB/T 40826-2021 |
Test method for hand-arranging staple length of dehaired cashmere—Flatbed sCANner method 分梳山羊绒手排长度试验方法 图板电子扫描仪法 |
China National Standards CAN |
English PDF |
| GB/T 39851.3-2021 |
Road vehicles—Diagnostic communication over Controller Area Network (DoCAN)—Part 3:Requirements for emissions-related systems 道路车辆 基于控制器局域网的诊断通信 第3部分：排放相关系统的需求 |
China National Standards CAN |
English PDF |
| GB/T 40830-2021 |
Code of practice for the determination of feed true ileal digestible amino acids for pigs (Simple T-CANnulation) 猪饲料真可消化氨基酸测定技术规程(简单T型瘘管法) |
China National Standards CAN |
English PDF |
| GB/T 40817.2-2021 |
Specification for nuclear power reactor coolant pump motor—Part 2:Asynchronous motor for CANned motor pump 核电主泵电机技术条件 第2部分：屏蔽泵异步电机 |
China National Standards CAN |
English PDF |
| GB/T 39111-2020 |
Technical requirements for dental model 3D sCANner 牙颌模型三维扫描仪技术要求 |
China National Standards CAN |
English PDF |
| GB/T 10784-2020 |
Classification of CANned food 罐头食品分类 |
China National Standards CAN |
English PDF |
| GB/T 38783-2020 |
Method of coating thickness determination for precious metal composites by sCANning electron microscope 贵金属复合材料覆层厚度的扫描电镜测定方法 |
China National Standards CAN |
English PDF |
| GB/T 27788-2020 |
Microbeam analysis—SCANning electron microscopy—Guidelines for calibrating image magnification 微束分析 扫描电镜 图像放大倍率校准导则 |
China National Standards CAN |
English PDF |
| GB/T 31309-2020 |
Calculation of electron vaCANcy number in cast superalloys 铸造高温合金电子空位数计算方法 |
China National Standards CAN |
English PDF |
| GB/T 38616-2020 |
Terminology for nano positioning and sCANing stage 纳米定位与扫描平台术语 |
China National Standards CAN |
English PDF |
| GB/T 38614-2020 |
Measuring method for nano positioning and sCANning stage based on flexible hinge mechanism and piezo actuator 基于柔性铰链机构和压电陶瓷驱动器的纳米定位与扫描平台测量方法 |
China National Standards CAN |
English PDF |
| GB/T 38537-2020 |
Ultrasonic testing method for fiber reinforced resin matrix composites—C-sCAN method 纤维增强树脂基复合材料超声检测方法 C扫描法 |
China National Standards CAN |
English PDF |
| GB/T 37055.2-2020 |
National articles numbering and basic information specification—Means of production—Part 2：Fuels and lubriCANts 国家物品编码与基础信息通用规范 生产资料 第2部分：燃润料 |
China National Standards CAN |
English PDF |
| GB/T 7758-2020 |
Rubber, vulCANized—Determination of low-temperature characteristics—Temperature-retraction procedure (TR test) 硫化橡胶 低温性能的测定 温度回缩程序（TR 试验） |
China National Standards CAN |
English PDF |
| GB/T 6036-2020 |
Rubber,vulCANized or thermoplastic—Determination of low-temperature stiffening(Gehman test) 硫化橡胶或热塑性橡胶 低温刚性的测定（吉门试验） |
China National Standards CAN |
English PDF |
| GB/T 25347-2020 |
Marine fuel and lubriCANt supply terms 船舶燃料与润滑油供应术语 |
China National Standards CAN |
English PDF |
| GB/T 39693.6-2020 |
Rubber, vulCANized or thermoplastic—Determination of hardness—Part 6: Apparent hardness of rubber-covered rollers by IRHD method 硫化橡胶或热塑性橡胶 硬度的测定 第6部分：IRHD法测定胶辊的表观硬度 |
China National Standards CAN |
English PDF |
| GB/T 39692-2020 |
Rubber,vulCANized or thermoplastic—Low temperature testing—General introduction and guide 硫化橡胶或热塑性橡胶 低温试验 概述与指南 |
China National Standards CAN |
English PDF |
| GB/T 18648-2020 |
Diagnostic techniques for AfriCAN swine fever 非洲猪瘟诊断技术 |
China National Standards CAN |
English PDF |
| GB/T 19208-2020 |
Ground vulCANized rubber 硫化橡胶粉 |
China National Standards CAN |
English PDF |
| GB/T 39431-2020 |
Plain bearings—Bearings containing dispersed solid lubriCANts 滑动轴承 含有分散固体润滑剂轴承 |
China National Standards CAN |
English PDF |
| GB/T 39248-2020 |
Thermoplastic multi-layer (non-vulCANized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification 输送液化石油气和液化天然气用热塑性塑料多层（非硫化）软管及软管组合件 规范 |
China National Standards CAN |
English PDF |
| GB/T 31334.6-2020 |
Test methods for dipped CANvas—Part 6 : Determinations of size, grammage, etc 浸胶帆布试验方法 第6部分：尺寸、克重等基本项目测量 |
China National Standards CAN |
English PDF |
| GB/T 22053-2020 |
Pentane vesiCANt 戊烷发泡剂 |
China National Standards CAN |
English PDF |
| GB/T 12585-2020 |
Rubber, vulCANized or thermoplastic—Rubber sheets and rubber-coated fabrics—Determination of transmission rate of volatile liquids (gravimetric technique) 硫化橡胶或热塑性橡胶 橡胶片材和橡胶涂覆织物 挥发性液体透过速率的测定（质量法） |
China National Standards CAN |
English PDF |
| GB/T 28029.11-2020 |
Electronic railway equipment—Train communication network(TCN)—Part 3-3:CANopen Consist Network（CCN） 轨道交通电子设备 列车通信网络（TCN） 第3-3部分：CANopen编组网（CCN） |
China National Standards CAN |
English PDF |
| GB/T 17783-2019 |
Rubber,vulCANized or thermoplastic—Chemical tests—Preparation of samples and test piece 硫化橡胶或热塑性橡胶 化学试验 样品和试样的制备 |
China National Standards CAN |
English PDF |
| GB/T 7755.2-2019 |
Rubber, vulCANized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第2部分：等压法 |
China National Standards CAN |
English PDF |
| GB/T 1685.2-2019 |
Rubber, vulCANized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling 硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分：循环温度下试验 |
China National Standards CAN |
English PDF |
| GB/T 38415-2019 |
Determination of tetrabromobisphenol A and hexabromocyclododeCANes content in toys—High performance liquid chromatography-tandem mass spectrometry 玩具中四溴双酚A和六溴环十二烷含量的测定 高效液相色谱-串联质谱法 |
China National Standards CAN |
English PDF |
| GB/T 17783-2019 |
Rubber,vulCANized or thermoplastic—Chemical tests—Preparation of samples and test piece 硫化橡胶或热塑性橡胶 化学试验 样品和试样的制备 |
China National Standards CAN |
English PDF |
| GB/T 7755.2-2019 |
Rubber, vulCANized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第2部分：等压法 |
China National Standards CAN |
English PDF |
| GB/T 1685.2-2019 |
Rubber, vulCANized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with temperature cycling 硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分：循环温度下试验 |
China National Standards CAN |
English PDF |
| GB/T 37997-2019 |
Thermoplastic multi-layer (non-vulCANized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification 输送烃类、溶剂和化学品用多层热塑性塑料（非硫化）软管及软管组合件 规范 |
China National Standards CAN |
English PDF |
| GB/T 37945-2019 |
Materials for organic light emitting diode display(OLED)—Test method of glass transfer temperature—Differential sCANning calorimetry (DSC) 有机发光二极管显示器用材料 玻璃化转变温度测试方法 差热法 |
China National Standards CAN |
English PDF |
| GB 38030.2-2019 |
Dimensions series of standard transport ship types passing the locks of inland rivers—Part 2：Grand CANal and Huai River system 内河过闸运输船舶标准船型主尺度系列 第2部分：京杭运河、淮河水系 |
China National Standards CAN |
English PDF |
| GB/T 37457-2019 |
SpudCAN penetration technology of self-elevating drilling unit 自升式钻井平台插桩工艺 |
China National Standards CAN |
English PDF |
| GB/T 19314.9-2019 |
Small craft—Hull construction and sCANtlings—Part 9:Sailing craft appendages 小艇 艇体结构和构件尺寸 第9部分：帆艇附体 |
China National Standards CAN |
English PDF |
| GB/T 19314.8-2019 |
Small craft—Hull construction and sCANtlings—Part 8:Rudders 小艇 艇体结构和构件尺寸 第8部分：舵 |
China National Standards CAN |
English PDF |
| GB/T 19314.7-2019 |
Small craft—Hull construction and sCANtlings—Part 7:Scantling determination of multihulls 小艇 艇体结构和构件尺寸 第7部分：多体船尺寸的确定 |
China National Standards CAN |
English PDF |
| GB/T 19314.6-2019 |
Small craft—Hull construction and sCANtlings—Part 6:Structural arrangements and detail 小艇 艇体结构和构件尺寸 第6部分：结构布置和细则 |
China National Standards CAN |
English PDF |
| GB/T 19314.5-2019 |
Small craft—Hull construction and sCANtlings—Part 5:Design pressures for monohulls,design stresses,scantlings determination 小艇 艇体结构和构件尺寸 第5部分：单体船设计压力、设计应力、构件尺寸的确定 |
China National Standards CAN |
English PDF |
| GB/T 19314.4-2019 |
Small craft—Hull construction and sCANtlings—Part 5:Design pressures for monohulls,design stresses,scantlings determination 小艇 艇体结构和构件尺寸 第4部分：车间和制造 |
China National Standards CAN |
English PDF |
| GB/T 19314.3-2019 |
Small craft—Hull construction and sCANtlings—Part 3:Materials:Steel,aluminium alloys,wood,other materials 小艇 艇体结构和构件尺寸 第3部分：材料：钢、铝合金、木材、其他材料 |
China National Standards CAN |
English PDF |
| GB/T 19314.2-2019 |
Small craft—Hull construction and sCANtlings—Part 2:Materials: Core materials for sandwich construction, embedded materials 小艇 艇体结构和构件尺寸 第2部分：材料：夹层结构用芯材、埋置材料 |
China National Standards CAN |
English PDF |
| GB/T 9106.2-2019 |
Packaging containers—Two-piece CAN—Part 2:Aluminum easy open end and steel can 包装容器 两片罐 第2部分：铝易开盖钢罐 |
China National Standards CAN |
English PDF |
| GB/T 9106.1-2019 |
Packaging containers—Two-piece CAN—Part 1:Aluminum easy open end and aluminum can 包装容器 两片罐 第1部分：铝易开盖铝罐 |
China National Standards CAN |
English PDF |
| GB/T 37351-2019 |
Design guidelines for spudCAN structure of self-elevating drilling units 自升式钻井平台桩靴结构设计指南 |
China National Standards CAN |
English PDF |
| GB/T 37349-2019 |
Design guidelines for CANtilever structure of self-elevating drilling units 自升式钻井平台悬臂梁结构设计指南 |
China National Standards CAN |
English PDF |
| GB/T 3142-2019 |
Standard test method for determination of load-carrying capacity of lubriCANts—Four-ball method 润滑剂承载能力的测定 四球法 |
China National Standards CAN |
English PDF |
| GB/T 20493.3-2018 |
Electronic imaging—Test target for sCANning of office documents—Part3:Test target for use in lower resolution applications 电子成像-办公文件扫描用测试标板-第3部分：较低解像力应用测试标板 |
China National Standards CAN |
English PDF |
| GB/T 37171-2018 |
Specification and test methods for bronze plate containing diamond-shaped solid lubriCANt 含有菱形固体润滑剂的青铜板材技术要求和检验方法 |
China National Standards CAN |
English PDF |
| GB/T 22856-2018 |
Gambiered CANton silk fabrics 莨绸 |
China National Standards CAN |
English PDF |
| GB/T 37272-2018 |
Determination of 11-nor-9-carboxy-delta-9-tetrahydroCANnabinol in urine—Liquid chromatography-tandem mass spectrometry method 尿液中△9-四氢大麻酸的测定-液相色谱-串联质谱法 |
China National Standards CAN |
English PDF |
| GB/T 36965-2018 |
Test method for cross-linking degree of ethylene-vinyl acetate copolymer applied in photovoltaic modules—Differential sCANning calorimetry（DSC） 光伏组件用乙烯—醋酸乙烯共聚物交联度测试方法-差示扫描量热法 |
China National Standards CAN |
English PDF |
| GB/T 37185-2018 |
Gas analysis—Determination of indoor harmful volatile organic compounds—"SUMMA CANister and silonite tube" and chromatography/mass spectrometry（GC/MS） 气体分析-室内挥发性有害有机物的测定SUMMA罐-硅烷化管采样气相色谱/质谱联用（GC/MS）法 |
China National Standards CAN |
English PDF |
| GB/T 36473-2018 |
Information technology—General specification of documents camera sCANne 信息技术 文档拍摄仪通用规范 |
China National Standards CAN |
English PDF |
| GB/T 35099-2018 |
Microbeam analysis—SCANning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air 微束分析 扫描电镜-能谱法 大气细粒子单颗粒形貌与元素分析 |
China National Standards CAN |
English PDF |
| GB/T 35097-2018 |
Microbeam analysis—SCANning electron microscopy with energy dispersive X-ray spectrosmetry—Determination of numberical concentration of inorganic fibrous particles in ambient air 微束分析 扫描电镜-能谱法 环境空气中石棉等无机纤维状颗粒计数浓度的测定 |
China National Standards CAN |
English PDF |
| GB/T 20975.27-2018 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 27：Determination of cerium,lanthanum,sCANdium—Inductively coupled plasma atomic emission spectrometry method 铝及铝合金化学分析方法 第27部分：铈、镧、钪含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards CAN |
English PDF |
| GB/T 13219-2018 |
SCANdium oxide 氧化钪 |
China National Standards CAN |
English PDF |
| GB/T 16476-2018 |
SCANdium metal 金属钪 |
China National Standards CAN |
English PDF |
| GB/T 36397-2018 |
Grade quality of AmeriCAN ginseng 西洋参分等质量 |
China National Standards CAN |
English PDF |
| GB/T 36422-2018 |
Man-made fiber—Test method for micro morphology and diameter—SCANning electron microscope method 化学纤维 微观形貌及直径的测定 扫描电镜法 |
China National Standards CAN |
English PDF |
| GB/T 36556-2018 |
Technical requirements for anti-counterfeiting of cascaded image element sCANning 扫描图像元级联防伪技术条件 |
China National Standards CAN |
English PDF |
| GB/T 36557-2018 |
General technical requirements of image element sCANning instant machine-readable device 扫描图像元快速机读鉴别仪通用技术条件 |
China National Standards CAN |
English PDF |
| GB/T 7755.1-2018 |
Rubber,vulCANized or thermoplastic—Determination of permeability to gases—Part 1:Differential-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第1部分：压差法 |
China National Standards CAN |
English PDF |
| GB/T 36806-2018 |
Detection of SugarCANe bacilliform virus by real-time PCR 甘蔗杆状病毒实时荧光PCR检测方法 |
China National Standards CAN |
English PDF |
| GB/T 36807-2018 |
Detection and identification of Enterobacter CANcerogenus (Urosevi) Dickey et Zumoff 杨树（细菌性）枯萎病菌检疫鉴定方法 |
China National Standards CAN |
English PDF |
| GB/T 36820-2018 |
Detection method of SugarCANe streak mosaic virus by real-time reverse transcription polymerase chain reaction（RT-PCR） 甘蔗条纹花叶病毒实时荧光反转录聚合酶链式反应（RT-PCR）检测方法 |
China National Standards CAN |
English PDF |
| GB/T 36579-2018 |
Load test method of CANtilever system for self-elevating drilling unit 自升式钻井平台悬臂梁负荷试验方法 |
China National Standards CAN |
English PDF |
| GB/T 36843-2018 |
Detection and identification of CANdidatus Phytoplasma pyri 梨衰退植原体检疫鉴定方法 |
China National Standards CAN |
English PDF |
| GB/T 36768-2018 |
Dipped polyamide CANvas technical requirements and evaluation methods 锦纶浸胶帆布技术条件和评价方法 |
China National Standards CAN |
English PDF |
| GB/T 3513-2018 |
Rubber,vulCANized—Determination of adhesion to single wire—Pull out test 硫化橡胶 与单根钢丝粘合力的测定 抽出法 |
China National Standards CAN |
English PDF |
| GB/T 36659-2018 |
Design requirements of CANtilever skidding system for self-elevating drilling unit 自升式钻井平台悬臂梁滑移系统设计要求 |
China National Standards CAN |
English PDF |
| GB/T 35935-2018 |
Measurement of the mean and distribution of animal fibre diameter—LasersCAN fibre diameter analysis method 动物毛纤维平均直径与分布试验方法 激光扫描纤维直径分析法 |
China National Standards CAN |
English PDF |
| GB/T 35858-2018 |
Rubber,vulCANized—Test method of salt mist aging 硫化橡胶 盐雾老化试验方法 |
China National Standards CAN |
English PDF |
| GB/T 1683-2018 |
Rubber,vulCANized—Determination of compression set at constant strain 硫化橡胶 恒定形变压缩永久变形的测定方法 |
China National Standards CAN |
English PDF |
| GB/T 3511-2018 |
Rubber, vulCANized or thermoplastic—Resistance to weathering 硫化橡胶或热塑性橡胶 耐候性 |
China National Standards CAN |
English PDF |
| GB/T 35874-2018 |
Technical regulation for evaluation of sugarCANe resistance to smut（Sporisorium scitaminea Syd.） 甘蔗黑穗病抗性鉴定技术规程 |
China National Standards CAN |
English PDF |
| GB/T 35879-2018 |
Codes of practice for integrated management of sugarCANe stem borers 甘蔗螟虫综合防治技术规程 |
China National Standards CAN |
English PDF |
| GB/T 35836-2018 |
Technical regulation for evaluating cold tolerance of sugarCANe 甘蔗耐寒性鉴定技术规程 |
China National Standards CAN |
English PDF |
| GB/T 35998-2018 |
Determination of sucrose, brix and fibre in CANe and bagasse—The wet disintegrator method 甘蔗和蔗渣的蔗糖分、锤度及纤维分测定 湿式分解法 |
China National Standards CAN |
English PDF |
| GB/T 36003-2018 |
Food CAN made of tinplate or electrolytic chromium-coated steel(ECCS) 镀锡或镀铬薄钢板罐头空罐 |
China National Standards CAN |
English PDF |
| GB/T 36052-2018 |
Surface chemical analysis—Data transfer format for sCANning probe microscopy 表面化学分析 扫描探针显微镜数据传送格式 |
China National Standards CAN |
English PDF |
| GB/T 35807-2018 |
Rubber, vulCANized—Determination of thermal diffusivity—Flash method 硫化橡胶 热扩散系数的测定 闪光法 |
China National Standards CAN |
English PDF |
| GB/T 35804-2018 |
Rubber, vulCANized or thermoplastic－Resistance to ozone cracking－Test methods for determining the ozone concentration in laboratory test chambers 硫化橡胶或热塑性橡胶 耐臭氧龟裂 测定试验箱中臭氧浓度的试验方法 |
China National Standards CAN |
English PDF |
| GB/T 14837.3-2018 |
Rubber and rubber products—Determination of the composition of vulCANizates and uncured compounds by thermogravimetry—Part 3:Hydrocarbon rubbers，halogenated rubbers and polysiloxane rubbers after extraction 橡胶和橡胶制品 热重分析法测定硫化胶和未硫化胶的成分 第3部分：抽提后的烃橡胶、卤化橡胶、聚硅氧烷类橡胶 |
China National Standards CAN |
English PDF |
| GB/T 35803-2018 |
Determination of prohibited uroCANic acid and its ethyl ester in cosmetics—High performance liquid chromatography 化妆品中禁用物质尿刊酸及其乙酯的测定 高效液相色谱法 |
China National Standards CAN |
English PDF |
| GB/T 36048-2018 |
Passenger cars physical layer technical specification of CAN bus 乘用车CAN总线物理层技术要求 |
China National Standards CAN |
English PDF |
| GB/T 21303-2017 |
Specifications for water measurement of irrigation CANal system 灌溉渠道系统量水规范 |
China National Standards CAN |
English PDF |
| GB/T 34809-2017 |
Drought grade of sugarCANe 甘蔗干旱灾害等级 |
China National Standards CAN |
English PDF |
| GB/T 7631.18-2017 |
LubriCANts,industrial oils and related products(class L)—Classification—Part 18:Family Y(Miscellaneous) 润滑剂、工业用油和有关产品（L类）的分类 第18部分：Y组（其他应用） |
China National Standards CAN |
English PDF |
| GB/T 34535-2017 |
LubriCANts, industrial oils and related products(Class L)—Family X(Grease)—Specification 润滑剂、工业用油和有关产品(L类) X组(润滑脂) 规范 |
China National Standards CAN |
English PDF |
| GB/T 34361-2017 |
Non-destructive testing—Test method for frequency sCANning eddy current testing 无损检测 扫频涡流检测方法 |
China National Standards CAN |
English PDF |
| GB/T 34580-2017 |
Standard test method for measurement of lubriCANt generated insoluble color bodies in in-service turbine oils—Membrane patch colorimetry 运行涡轮机油中不溶有色物质的测定方法 膜片比色法 |
China National Standards CAN |
English PDF |
| GB/T 14251-2017 |
General technical standard for metal container of CANned food 罐头食品金属容器通用技术要求 |
China National Standards CAN |
English PDF |
| GB/T 34225-2017 |
Dipped aramid straight warp straight weft CANvas technical requirements and evaluation methods 浸胶芳纶直经直纬帆布技术条件和评价方法 |
China National Standards CAN |
English PDF |
| GB/T 34228-2017 |
Dipped heat-resistant CANvas―Test method for adhesion strength at high temperature 耐热浸胶帆布 高温粘合性能试验方法 |
China National Standards CAN |
English PDF |
| GB/T 34235-2017 |
Dipped polyester CANvas technical requirements and evaluation methods 涤纶浸胶帆布技术条件和评价方法 |
China National Standards CAN |
English PDF |
| GB/T 31334.5-2017 |
Test methods for dipped CANvas―Part 5: Tensile properties 浸胶帆布试验方法 第5部分：拉伸性能 |
China National Standards CAN |
English PDF |
| GB/T 1232.4-2017 |
Rubber,unvulCANized—Determinations using a shearing-disc viscometer—Part 4: Determination of the Mooney stress-relaxation rate 未硫化橡胶 用圆盘剪切黏度计进行测定 第4部分：门尼应力松弛率的测定 |
China National Standards CAN |
English PDF |
| GB/T 34018-2017 |
Non-destructive testing—Test method for sCANning ultrasonic microscopy 无损检测 超声显微检测方法 |
China National Standards CAN |
English PDF |
| GB/T 13213-2017 |
CANned pork mince 猪肉糜类罐头 |
China National Standards CAN |
English PDF |
| GB/T 6031-2017 |
Rubber, vulCANized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD) 硫化橡胶或热塑性橡胶 硬度的测定(10IRHD~100IRHD) |
China National Standards CAN |
English PDF |
| GB/T 33834-2017 |
Microbeam analysis—SCANning electron microscopy—Scanning electron microscope analysis of biological specimens 微束分析 扫描电子显微术 生物试样扫描电子显微镜分析方法 |
China National Standards CAN |
English PDF |
| GB/T 33838-2017 |
Microbeam analysis—SCANning electron microscopy—Methods of evaluating image sharpness 微束分析 扫描电子显微术 图像锐度评估方法 |
China National Standards CAN |
English PDF |
| GB/T 33806-2017 |
Technical requirement of area fluorescent imaging microarray sCANner 面阵荧光成像微阵列芯片扫描仪技术要求 |
China National Standards CAN |
English PDF |
| GB/T 33805-2017 |
Technical requirement of laser confocal biochip sCANner 激光共聚焦生物芯片扫描仪技术要求 |
China National Standards CAN |
English PDF |
| GB/T 33824-2017 |
Aluminum and Aluminum alloys plates, sheets and strips for CANs and caps of new energy power batteries 新能源动力电池壳及盖用铝及铝合金板、带材 |
China National Standards CAN |
English PDF |
| GB/T 33540.2-2017 |
LubriCANts for wind turbine—Part 2:Open gear greases 风力发电机组专用润滑剂 第2部分：开式齿轮润滑脂 |
China National Standards CAN |
English PDF |
| GB/T 33547-2017 |
Circulating CANned motor-pumps—Specification for performance evaluation 管道屏蔽电泵 性能评价规范 |
China National Standards CAN |
English PDF |
| GB/T 33540.1-2017 |
LubriCANts for wind turbine—Part 1: Bearing grease 风力发电机组专用润滑剂 第1部分：轴承润滑脂 |
China National Standards CAN |
English PDF |
| GB/T 33540.4-2017 |
LubriCANts for wind turbine—Part 4: Hydraulic oils 风力发电机组专用润滑剂 第4部分：液压油 |
China National Standards CAN |
English PDF |
| GB/T 33540.3-2017 |
LubriCANts for wind turbine—Part 3: Gear oils 风力发电机组专用润滑剂 第3部分：变速箱齿轮油 |
China National Standards CAN |
English PDF |
| GB/T 35272-2017 |
Guidelines for surveillance of citrus CANker 柑橘溃疡病监测规范 |
China National Standards CAN |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
