Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 45982.3-2025 |
Microjoining of Second-Generation High-Temperature Superconductors - Part 3: Joint Test Methods {译} 第二代高温超导体微连接-第3部分：接头试验方法 |
China National Standards Test Methods Temperature |
 English PDF |
| GB/T 45955-2025 |
Meteorological Instrument and Equipment Performance Test Methods - Temperature {译} 气象仪器设备性能测试方法-温度 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 2423.66-2025 |
Environmental Testing - Part 2: Test Methods - Test: Temperature/Humidity/Static Load Combination {译} 环境试验-第2部分：试验方法-试验：温度/湿度/静负载综合 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 45723-2025 |
Printed Circuit Board Test Methods - Resistance of Plated-Through Holes Under Temperature Cycling Changes {译} 印制电路板测试方法-温度循环状态下镀覆孔单孔电阻的变化 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 6148-2025 |
Test Methods for Temperature Coefficient of Resistance of Precision Resistance Alloys {译} 精密电阻合金电阻温度系数测试方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 45598-2025 |
Fine Ceramics - High-Temperature Elasticity Test Methods for Elastomer Modulus, Shear Modulus, and Poisson's Ratio - Pulse Excitation Method {译} 精细陶瓷-高温弹性模量、剪切模量和泊松比试验方法-脉冲激励法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 23595.4-2025 |
Test methods for rare earth phosphors for LEDs - Part 4: Determination of high-temperature and high-humidity performance {译} LED用稀土荧光粉试验方法-第4部分：高温高湿性能的测定 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 44753-2024 |
Test methods for liquidus temperature of ultra-thin glass {译} 超薄玻璃液相线温度试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 5169.13-2024 |
Fire hazard testing for electrical and electronic products - Part 13: Basic test methods for glowing wire/hot wire - Glow wire ignition temperature (GWIT) test method for materials {译} 电工电子产品着火危险试验-第13部分:灼热丝/热丝基本试验方法-材料的灼热丝起燃温度（GWIT）试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 2423.65-2024 |
Environmental testing - Part 2: Test methods - Test: salt spray/temperature/humidity/solar radiation combination {译} 环境试验-第2部分：试验方法-试验：盐雾/温度/湿度/太阳辐射综合 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 2423.34-2024 |
Environmental testing - Part 2: Test methods - Test Z/AD: Temperature/humidity combined cycle test {译} 环境试验-第2部分：试验方法-试验Z/AD:温度/湿度组合循环试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 44030-2024 |
Metallic materials-High temperature compression test methods {译} 金属材料-高温压缩试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 43115-2023 |
Metallic materials - Sheet and strip - Room temperature shear test methods {译} 金属材料 薄板和薄带 室温剪切试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 42913-2023 |
Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials embedded in salt, ash or other solids {译} 金属和合金的腐蚀 金属材料嵌入在盐、灰烬或其他固体中的高温腐蚀试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 42912-2023 |
Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials under static immersion in molten salts or other liquids {译} 金属和合金的腐蚀 金属材料在静态浸入熔盐或其他液体条件下的高温腐蚀试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 42603.2-2023 |
Moderate temperature molding materials for investment casting - Part 2: Test methods for serviceability {译} 熔模铸造中温模料 第2部分:使用性能试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 42603.1-2023 |
Moderate temperature molding materials for investment casting - Part 1: Test methods for physical properties {译} 熔模铸造中温模料 第1部分：物理性能试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 4937.23-2023 |
Semiconductor devices - Mechanical and climatic test methods - Part 23: High temperature operating life {译} 半导体器件 机械和气候试验方法 第23部分：高温工作寿命 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 4937.42-2023 |
Semiconductor devices - Mechanical and climatic test methods - Part 42: Temperature and humidity storage {译} 半导体器件 机械和气候试验方法 第42部分：温湿度贮存 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 5170.18-2022 |
Test methods for environmental test equipment - Part 18: Temperature/humidity combined cycle test equipment {译} 环境试验设备检验方法 第18部分：温度/湿度组合循环试验设备 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 12085.23-2022 |
Optics and photonics - Environmental test methods - Part 23: Combined test for low pressure and low temperature, atmospheric temperature, high temperature or damp heat {译} 光学和光子学 环境试验方法 第23部分：低压与低温、大气温度、高温或湿热综合试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 12085.22-2022 |
Optics and photonics - Environmental test methods - Part 22: Combined test of low temperature, high temperature or temperature change with impact or random vibration {译} 光学和光子学 环境试验方法 第22部分: 低温、高温或温度变化与碰撞或随机振动综合试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 12085.2-2022 |
Optics and photonics - Environmental test methods - Part 2: Low temperature, high temperature, damp heat {译} 光学和光子学 环境试验方法 第2部分：低温、高温、湿热 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 38924.2-2020 |
Environmental test methods for civil small and light unmanned aircraft system—Part 2: Low-temperature test 民用轻小型无人机系统环境试验方法 第2部分: 低温试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 38924.3-2020 |
Environmental test methods for civil small and light unmanned aircraft system—Part 3: High-temperature test 民用轻小型无人机系统环境试验方法 第3部分：高温试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 38924.4-2020 |
Environmental test methods for civil small and light unmanned aircraft system—Part 4: Temperature and altitude test 民用轻小型无人机系统环境试验方法 第4部分：温度和高度试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 2423.27-2020 |
Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests 环境试验 第2部分：试验方法 试验方法和导则：温度/低气压或温度/湿度/低气压综合试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 5137.3-2020 |
Test methods of safety glazing materials used on road vehicles—Part 3:Radiation,high temperature,humidity,fire and simulated weathering resistance tests 汽车安全玻璃试验方法 第3部分：耐辐照、高温、潮湿、燃烧和耐模拟气候试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 32065.8-2020 |
Environmental test methods for oceanographic instruments—Part 8：Change of temperature test 海洋仪器环境试验方法 第8部分：温度变化试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 2423.63-2019 |
Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode) 环境试验 第2部分:试验方法 试验:温度(低温、高温)/低气压/振动(混合模式)综合 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 5170.19-2018 |
Inspection methods for environmental testing equipments—Part 19:Combined temperature vibration(sinusoidal) testing equipment 环境试验设备检验方法-第19部分：温度、振动(正弦)综合试验设备 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 14235.1-2018 |
Low temperature pattern wax material for investment casting—Part 1: Testing methods for physical properties 熔模铸造低温模料-第1部分：物理性能试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 14235.2-2018 |
Low temperature pattern wax materials for investment casting—Part 2: Testing methods for usability properties 熔模铸造低温模料-第2部分：使用性能试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 37052-2018 |
Test methods for nominal module operating temperature of building integrated photovoltaic(BIPV) modules 光伏建筑一体化（BIPV）组件电池额定工作温度测试方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 4937.15-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 15: Resistance to soldering temperature for through-hole mounted devices 半导体器件 机械和气候试验方法 第15部分：通孔安装器件的耐焊接热 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 4937.11-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 11: Rapid change of temperature—Two-fluid-bath method 半导体器件 机械和气候试验方法 第11部分：快速温度变化 双液槽法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 34520.7-2017 |
Test methods for continuous silicon carbide fiber—Part 7 ：High temperature strength retention rate 连续碳化硅纤维测试方法 第7部分：高温强度保留率 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 5170.2-2017 |
Inspection methods for environmental testing equipments—Part 2: Temperature testing equipments 环境试验设备检验方法 第2部分：温度试验设备 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 5170.10-2017 |
Inspection methods for environmental testing equipments—Part 10：Combined high and low temperature/low air pressure testing equipments 环境试验设备检验方法 第10部分：高低温低气压试验设备 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 7166-2015 |
Characteristics and test methods for in-core and primary coolant circuit temperature sensors in nuclear power plants 核电厂反应堆堆芯和主冷却剂回路内温度计的特性和试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 30103.1-2013 |
Methods of testing for thermal performance on cold store―Part 1: Temperature and humidity testing 冷库热工性能试验方法 第1部分：温度和湿度检测 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 5169.13-2013 |
Fire hazard testing for electric and electronic product―Part 13：Glowing/hot-wire based test methods―Glow-wire ignition temperature (GWIT) test method for materials 电工电子产品着火危险试验 第13部分：灼热丝/热丝基本试验方法 材料的灼热丝起燃温度（GWIT）试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 29459.2-2012 |
Small punch test methods of metallic materials for in-service pressure equipments - Part 2：Method of test for tensile properties at room temperature 在役承压设备金属材料小冲杆试验方法 第2部分：室温下拉伸性能的试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 28958-2012 |
Test methods of low temperature performance for passenger car 乘用车低温性能试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 2423.34-2012 |
Environmental testing - Part 2: Test methods - Test Z/AD: Composite temperature/humidity cyclic test 环境试验 第2部分：试验方法 试验Z/AD：温度/湿度组合循环试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 2423.22-2012 |
Environmental testing - Part 2: Tests methods - Test N: Change of temperature 环境试验 第2部分：试验方法 试验N：温度变化 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 12085.21-2011 |
Optics and optical instruments - Environmental test methods - Part 21: Combined low pressure and ambient temperature or dry heat 光学和光学仪器 环境试验方法 第21部分：低压与大气温度、高温综合试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 7962.4-2010 |
Test methods of colourless optical glass - Part 4: Temperature coefficient of refractive index 无色光学玻璃测试方法 第4部分：折射率温度系数 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 7962.16-2010 |
Test methods of colourless optical glass - Part 16: Linear thermal expansion coefficient，transformation temperature and yield point temperature 无色光学玻璃测试方法 第16部分：线膨胀系数、转变温度和弛垂温度 |
China National Standards Test Methods Temperature |
English PDF |
| GB 12476.8-2010 |
Electrical apparatus for use in the presence of combustible dust - Part 8: Test methods - Methods for determining the minimum ignition temperatures of dust 可燃性粉尘环境用电气设备 第8部分： 试验方法 确定粉尘最低点燃温度的方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 23595.7-2010 |
Test methods of rare earth yellow phosphor for white LED lamps - Part 7: Determination of temperature quenching 白光LED灯用稀土黄色荧光粉试验方法 第7部分：热猝灭性的测定 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 14634.7-2010 |
Test methods of rare earth three-band phosphors for fluorescent lamps - Part 7: Determination of temperature quenching 灯用稀土三基色荧光粉试验方法 第7部分：热猝灭性的测定 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 4074.8-2009 |
Winding wires - Test methods - Part 8: Test procedure for the determination of the temperature index of enamelled winding wires - Quick-Test method 绕组线试验方法 第8部分：测定漆包绕组线温度指数的试验方法 快速法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 4074.7-2009 |
Winding wires - Test methods - Part 7: Test procedure for the determination of the temperature index of enamelled winding wires 绕组线试验方法 第7部分：测定漆包绕组线温度指数的试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 2423.59-2008 |
Environmental testing - Part 2: Test methods - Test Z/ABMFh: Combined temperature(cold and heat)/low air pressure/vibration（random） 电工电子产品环境试验 第2部分：试验方法 试验Z/ABMFh：温度（低温、高温）/低气压/振动（随机）综合 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 22567-2008 |
Electrical insulating materials - Methods of test for the determination of the glass transition temperature 电气绝缘材料 测定玻璃化转变温度的试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 2951.51-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 51:Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive component 电缆和光缆绝缘和护套材料通用试验方法 第51部分：填充膏专用试验方法 滴点 油分离 低温脆性 总酸值 腐蚀性 23℃时的介电常数 23℃和100℃时的直流电阻率 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 2951.42-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 42:Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrappi 电缆和光缆绝缘和护套材料通用试验方法 第42部分：聚乙烯和聚丙烯混合料专用试验方法 高温处理后抗张强度和断裂伸长率试验 高温处理后卷绕试验 空气热老化后的卷绕试验 测定质量的增 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 2951.31-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 31:Methods specific to PVC compounds - Pressure test at high temperature - Test for resistance to cracking 电缆和光缆绝缘和护套材料通用试验方法 第31部分：聚氯乙烯混合料专用试验方法 高温压力试验-抗开裂试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 2951.14-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 14:Methods for general application - Test at low temperature 电缆和光缆绝缘和护套材料通用试验方法 第14部分：通用试验方法 低温试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 3903.18-2008 |
Footwear - Test methods for uppers - High temperature behaviour 鞋类 帮面试验方法 高温性能 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 5170.2-2008 |
Inspection methods for environmental testing equipments for electric and electronic products - Temperature testing equipments 电工电子产品环境试验设备检验方法 温度试验设备 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 5170.10-2008 |
Inspection methods for environmental testing equipments for electric and electronic products - Combined high and low temperature/low air pressure testing equipments 电工电子产品环境试验设备检验方法 高低温低气压试验设备 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 2423.102-2008 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test: combined temperature(cold and heat)/low air pressure/vibration（sinusoidal） 电工电子产品环境试验 第2部分：试验方法 试验：温度（低温、高温）/低气压/振动（正弦）综合 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 15972.52-2008 |
Specifications for optical fibre test methods - Part 52: Measurement methods and test procedures for environmental characteristics - Change of temperature 光纤试验方法规范 第52部分：环境性能的测量方法和试验程序 温度循环 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 21000.1-2007 |
Commercial refrigerated cabinets - Methods of test - Part 1: General test conditions and temperature test 商用冷藏柜 试验方法 第1部分：通用试验条件及温度试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 328.15-2007 |
Test methods for building sheets for waterproofing - Part 15: Plastic and rubber sheets for waterproof-foldability at low temperature 建筑防水卷材试验方法 第15部分：高分子防水卷材 低温弯折性 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 328.14-2007 |
Test methods for building sheets for waterproofing - Part 14: Bitumen sheets for waterproofing-flexibility at low temperature 建筑防水卷材试验方法 第14部分：沥青防水卷材 低温柔性 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 328.11-2007 |
Test methods for building sheets for waterproofing - Part 11: Bitumen sheets for waterproofing-flow resistance at elevated temperature 建筑防水卷材试验方法 第11部分：沥青防水卷材 耐热性 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 5170.18-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments 电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 5170.19-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined temperature/vibration(Sinusoidal)testing equipments 电工电子产品环境试验设备 基本参数检定方法 温度/振动(正弦)综合试验设备 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 8243.3-2003 |
Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 3: Resistance to high differential pressure and to elevated temperature 内燃机全流式机油滤清器试验方法 第3部分: 耐高压差和耐高温特性 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 5137.3-2002 |
Road vehicles--Safety glazing materials--Part 3:Test methods for resistance to radiation，high temperature，humidity，fire and simulated weathering 汽车安全玻璃试验方法 第3部分:耐辐照高温潮湿燃烧和耐模拟气候试验 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 17339-1998 |
Road vehicles--Safety glazing materials--Test methods for resistant-to-chemicals and resistant-to-temperature changes 汽车安全玻璃耐化学浸蚀性和耐温度变化性试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 13823.16-1995 |
Methods for calibrationof vibration and shock pick-ups--Testing of temperature response by comparison 振动与冲击传感器的校准方法 温度响应比较测试法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 13823.15-1995 |
Methods for calibration of vibration and shock pick-ups--Testing of transient temperature sensitivity 振动与冲击传感器的校准方法 瞬变温度灵敏度测试法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 15489.4-1995 |
Colour filter glass test methods--Colour temperature conversion ability 滤光玻璃测试方法 色温变换能力 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 15309-1994 |
Technical requirements and testing methods for temperature and humidity instruments for cargo hold of vessel 船舶货舱温湿度仪技术要求及试验方法 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 11310-1989 |
Test methods for the properties of piezoelectric ceramics--Test methods for temperature characteristics of relative free dielectric constants 压电陶瓷材料性能测试方法 相对自由介电常数温度特性的测试 |
China National Standards Test Methods Temperature |
English PDF |
| GB/T 7166-1987 |
In-core temperature orprimary envelope temperature measurements in nuclear power reactor--Characteristics and test methods 核动力堆堆芯或堆主包壳内温度测量特性和测试方法 |
China National Standards Test Methods Temperature |
English PDF |
| Find out:80Items | To Page of: First -Previous-Next -Last | 1 |
