Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 4893.4-2023 |
Testing of physical and chemical properties of paint films on furniture surfaces Part 4: Adhesion cross-cut determination method {译} 家具表面漆膜理化性能试验 第4部分：附着力交叉切割测定法 |
China National Standards cross |
 English PDF |
| GB/T 43291-2023 |
cross-border e-commerce overseas warehouse operation and management requirements {译} 跨境电子商务海外仓运营管理要求 |
China National Standards cross |
English PDF |
| GB/T 43165-2023 |
Pest risk analysis of cross-border transport of used vehicles, machinery and equipment {译} 使用过的车辆、机械及设备跨境运输有害生物风险分析 |
China National Standards cross |
English PDF |
| GB/T 43164-2023 |
Risk analysis of pests in cross-border transportation of plant growing media for planting {译} 种植用植物生长介质跨境运输有害生物风险分析 |
China National Standards cross |
English PDF |
| GB/T 43161-2023 |
Pest risk analysis of cross-border transport of timber {译} 木材跨境运输有害生物风险分析 |
China National Standards cross |
English PDF |
| GB/T 43087-2023 |
Microbeam analysis Analytical electron microscopy Method for determining interface position in cross-sectional images of layered materials {译} 微束分析 分析电子显微术 层状材料截面像中界面位置的确定方法 |
China National Standards cross |
English PDF |
| GB/T 1630.2-2023 |
Plastics Epoxy resins Part 2: Specimen preparation and property determination of cross-linked epoxy resins {译} 塑料 环氧树脂 第2部分:试样制备和交联环氧树脂的性能测定 |
China National Standards cross |
English PDF |
| GB/T 25922-2023 |
Measurement of fluid flow in closed pipes Flow measurement using a vortex flowmeter installed in a circular cross-section pipe filled with fluid {译} 封闭管道中流体流量的测量 用安装在充满流体的圆形截面管道中的涡街流量计测量流量 |
China National Standards cross |
English PDF |
| GB/T 42774-2023 |
Guidelines for Quality and Safety Management of cross-Border E-Commerce Supply Chains {译} 跨境电子商务供应链质量安全管理指南 |
China National Standards cross |
English PDF |
| GB/T 5291.1-2023 |
Electrical discharge forming machine tools - Accuracy inspection - Part 1: Single column machine tools (cross table type and fixed table type) {译} 电火花成形机床 精度检验 第1部分：单立柱机床（十字工作台型和固定工作台型） |
China National Standards cross |
English PDF |
| GB/T 42497-2023 |
Guidelines for Quality Risk Assessment of Imported Commodities in cross-Border E-Commerce {译} 跨境电子商务进口商品质量风险评估指南 |
China National Standards cross |
English PDF |
| GB/T 1927.15-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 15: Determination of tensile strength across grains {译} 无疵小试样木材物理力学性质试验方法 第15部分：横纹抗拉强度测定 |
China National Standards cross |
English PDF |
| GB/T 41928-2022 |
Plastics epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC) {译} 塑料 环氧树脂 差示扫描量热法（DSC）测定交联环氧树脂交联度 |
China National Standards cross |
English PDF |
| GB/T 41825-2022 |
Management Specifications for cross-border E-commerce Comprehensive Service Business of Small, Medium and Micro Enterprises {译} 中小微企业跨境电商综合服务业务管理规范 |
China National Standards cross |
English PDF |
| GB/T 42002-2022 |
Multilingual description of cross-border e-commerce transaction product information Smartphone {译} 跨境电子商务交易类产品信息多语种描述 智能手机 |
China National Standards cross |
English PDF |
| GB/T 42003-2022 |
Multilingual classification and naming of cross-border e-commerce transaction products Ceramic products {译} 跨境电子商务交易类产品多语种分类与命名 陶瓷产品 |
China National Standards cross |
English PDF |
| GB/Z 42007-2022 |
Service quality evaluation of cross-border e-commerce transactions {译} 跨境电子商务交易服务质量评价 |
China National Standards cross |
English PDF |
| GB/T 41722-2022 |
Road vehicles—crosswind sensitivity—Fan input open-loop test method {译} 道路车辆 侧风敏感性 风机输入开环试验方法 |
China National Standards cross |
English PDF |
| GB/T 26957-2022 |
Destructive testing of welds in metallic materials - Tensile test methods for cross joints and lap joints {译} 金属材料焊缝破坏性试验 十字接头和搭接接头拉伸试验方法 |
China National Standards cross |
English PDF |
| GB/T 40202-2021 |
Requirements for logistics information interchange in cross-border e-commerce 跨境电子商务物流信息交换要求 |
China National Standards cross |
English PDF |
| GB/T 9286-2021 |
Paints and varnishes—cross-cut test 色漆和清漆 划格试验 |
China National Standards cross |
English PDF |
| GB/T 40292-2021 |
cross-border electronic commerce—Specification for electronic waybill 跨境电子商务 电子运单规范 |
China National Standards cross |
English PDF |
| GB/T 40290-2021 |
cross-border electronic commerce—Specification for import commodity information release 跨境电子商务 进口商品信息发布规范 |
China National Standards cross |
English PDF |
| GB/T 40172-2021 |
General guidance on detection methods of mammalian cell cross-contamination 哺乳动物细胞交叉污染检测方法通用指南 |
China National Standards cross |
English PDF |
| GB/T 40105-2021 |
Requirements for cross-border electronic commerce transaction 跨境电子商务交易要求 |
China National Standards cross |
English PDF |
| GB/T 25068.5-2021 |
Information technology—Security techniques—Network security—Part 5: Securing communications across networks using virtual private networks 信息技术 安全技术 网络安全 第5部分：使用虚拟专用网的跨网通信安全保护 |
China National Standards cross |
English PDF |
| GB/T 5095.2501-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-1: Test 25a: crosstalk ratio 电子设备用机电元件 基本试验规程及测量方法 第25-1部分：试验25a：串扰比 |
China National Standards cross |
English PDF |
| GB/T 41128-2021 |
cross-border E-commerce -- Specification for information description of export commodity 跨境电子商务 出口商品信息描述规范 |
China National Standards cross |
English PDF |
| GB/T 41127-2021 |
cross-border E-commerce -- Specification for online dispute resolution documents 跨境电子商务 在线争议解决单证规范 |
China National Standards cross |
English PDF |
| GB/T 41126-2021 |
cross-border E-commerce -- Specification for information description of export trade entity 跨境电子商务 出口经营主体信息描述规范 |
China National Standards cross |
English PDF |
| GB/T 40843-2021 |
cross-border E-commerce—Guidelines for sharing of products traceability information 跨境电子商务 产品追溯信息共享指南 |
China National Standards cross |
English PDF |
| GB/T 40841-2021 |
cross-border E-commerce—Guidelines on exchange of product quality evaluation result 跨境电子商务 产品质量评价结果交换指南 |
China National Standards cross |
English PDF |
| GB/T 39053-2020 |
Specification of credit assessment for merchants on cross-border E-commerce platform 跨境电子商务平台商家信用评价规范 |
China National Standards cross |
English PDF |
| GB/T 39062-2020 |
cross-border E-commerce—Specification for products traceability information management 跨境电子商务 产品溯源信息管理规范 |
China National Standards cross |
English PDF |
| GB/T 39081-2020 |
Test method of cross tension test for resistance spot and embossed projection welds 电阻点焊及凸焊接头的十字拉伸试验方法 |
China National Standards cross |
English PDF |
| GB/T 38902-2020 |
Determination of hollow fiber membrane cross-section dimensions—Image analysis method 中空纤维膜丝截面结构尺寸的测定 图像分析法 |
China National Standards cross |
English PDF |
| GB/T 5095.2509-2020 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-9: Signal integrity tests－Test 25i: Alien crosstalk 电子设备用机电元件 基本试验规程及测量方法 第25-9部分：信号完整性试验 试验25i：外来串扰 |
China National Standards cross |
English PDF |
| GB/T 39678-2020 |
Specification for cross-border E-commerce industrial park service 跨境电子商务产业园服务规范 |
China National Standards cross |
English PDF |
| GB/T 39676-2020 |
cross-border electronic commerce—Electronic document for logistics information and payment information declaration 跨境电子商务 物流信息申报和支付信息申报电子单证 |
China National Standards cross |
English PDF |
| GB/T 39621-2020 |
Textiles—Quantitative chemical analysis—Mixture of cross-linked lyocell fibres and viscose or cupro or modal (method using formic acid and zinc chloride) 纺织品 定量化学分析 交联型莱赛尔纤维与粘胶纤维、铜氨纤维、莫代尔纤维的混合物（甲酸/氯化锌法） |
China National Standards cross |
English PDF |
| GB/T 39564.1-2020 |
Multi-carrier shared distribution infrastructure for fibre to the home—Part 1: Optical cable cross-connect cabinet 光纤到户用多电信业务经营者共用型配线设施 第1部分：光缆交接箱 |
China National Standards cross |
English PDF |
| GB/T 39464-2020 |
Multilingual classification and named of cross-border E-commerce trading products—Footwear 跨境电子商务交易类产品多语种分类与命名 鞋 |
China National Standards cross |
English PDF |
| GB/T 37369-2019 |
Inspection and assessment of crossing and aerial crossing of buried steel pipelines 埋地钢质管道穿跨越段检验与评价 |
China National Standards cross |
English PDF |
| GB/T 37311-2019 |
Performance evaluation of Qinchuan cattle and its crossbreeding progeny 秦川牛及其杂交后代生产性能评定 |
China National Standards cross |
English PDF |
| GB/T 37147-2018 |
Basic information description of electrical order form for cross-border electronic commerce 跨境电子商务电子订单基础信息描述 |
China National Standards cross |
English PDF |
| GB/T 37146-2018 |
Basic information description of electrical shipping bills for cross-border electronic commerce 跨境电子商务电子舱单基础信息描述 |
China National Standards cross |
English PDF |
| GB/T 37148-2018 |
Basic information description of electrical declaration form for cross-border electronic commerce 跨境电子商务电子报关单基础信息描述 |
China National Standards cross |
English PDF |
| GB/T 36965-2018 |
Test method for cross-linking degree of ethylene-vinyl acetate copolymer applied in photovoltaic modules—Differential scanning calorimetry（DSC） 光伏组件用乙烯—醋酸乙烯共聚物交联度测试方法-差示扫描量热法 |
China National Standards cross |
English PDF |
| GB 36900.3-2018 |
cross Linked High Density Polyethene High Integrity Container for Low-and-intermediate level radioactive solid wastes 低、中水平放射性废物高完整性容器-交联高密度聚乙烯容器 |
China National Standards cross |
English PDF |
| GB/T 36209-2018 |
Agricultural service—Specifications for agricultural machinery operations service across the region 农业社会化服务 农机跨区作业服务规范 |
China National Standards cross |
English PDF |
| GB 10494-2018 |
Technical specification for crossing signal equipment in wayside 铁路区间道口信号设备技术条件 |
China National Standards cross |
English PDF |
| GB/T 36368-2018 |
Business requirements specification—cross industry invoicing process 业务需求规范 跨行业发票开具过程 |
China National Standards cross |
English PDF |
| GB/T 36371-2018 |
Requierments specification mapping—cross industry invocing process 需求规范映射 跨行业发票开具过程 |
China National Standards cross |
English PDF |
| GB 10493-2018 |
Technical specification for crossing signal equipment within the station 铁路站内道口信号设备技术条件 |
China National Standards cross |
English PDF |
| GB/T 17737.122-2018 |
Coaxial communication cables—Part 1-122: Electrical test methods—Test for cross-talk between coaxial cables 同轴通信电缆 第1-122部分：电气试验方法 同轴电缆间串音试验 |
China National Standards cross |
English PDF |
| GB/T 34636-2017 |
cross contamination prevention and control specifications of feed processing equipment 饲料加工设备交叉污染防控技术规范 |
China National Standards cross |
English PDF |
| GB 5768.6-2017 |
Road traffic signs and markings—Part 6: Highway-railway grade crossing 道路交通标志和标线 第6部分：铁路道口 |
China National Standards cross |
English PDF |
| GB/T 33878-2017 |
Steel cross wedge rollings—Technological design principle 钢质楔横轧件 工艺编制原则 |
China National Standards cross |
English PDF |
| GB/T 847-2017 |
cross-recessed raised countersunk (oval) head tapping screws 十字槽半沉头自攻螺钉 |
China National Standards cross |
English PDF |
| GB/T 845-2017 |
cross-recessed pan head tapping screws 十字槽盘头自攻螺钉 |
China National Standards cross |
English PDF |
| GB/T 32076.9-2017 |
High-strength structural bolting assemblies for preloading—Part 9: Torshear type bolt with hexagon head with large width across flats，and nut assemblies 预载荷高强度栓接结构连接副 第9部分：扭剪型大六角头螺栓和螺母连接副 |
China National Standards cross |
English PDF |
| GB/T 846-2017 |
cross-recessed countersunk (flat) head tapping screws 十字槽沉头自攻螺钉 |
China National Standards cross |
English PDF |
| GB/T 33576-2017 |
cross-regional exchange for travel service information 跨区域交通出行服务信息交换 |
China National Standards cross |
English PDF |
| GB/T 1563-2017 |
Taper keys—cross section dimensions of keyways 楔键 键槽的剖面尺寸 |
China National Standards cross |
English PDF |
| GB/Z 35588-2017 |
Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits 用安装在圆形截面管道中的差压装置测量湿气体流量 |
China National Standards cross |
English PDF |
| GB/T 33150-2016 |
Five-axis simultaneous control plano-milling machines with a traveling overhead cross raill—Testing of the accuracy 五轴联动高架横梁移动龙门铣床 精度检验 |
China National Standards cross |
English PDF |
| GB/T 32538.1-2016 |
Agricultural vehicles—Mechanical connections on towed vehicles—Part 1: Dimensions for hitch rings of 50/30 mm cross section 农业车辆 被牵引车辆的机械连接装置 第1部分：50mm/30mm横截面的挂接环尺寸 |
China National Standards cross |
English PDF |
| GB/T 823-2016 |
Small pan head screws with cross recess 十字槽小盘头螺钉 |
China National Standards cross |
English PDF |
| GB/T 822-2016 |
Cheese head screws with cross recess 十字槽圆柱头螺钉 |
China National Standards cross |
English PDF |
| GB/T 819.2-2016 |
Countersunk flat head screws with cross recess—Part 2: Property class 8.8, stainless steel screws and non-ferrous metal screws 十字槽沉头螺钉 第2部分：8.8级、不锈钢及有色金属螺钉 |
China National Standards cross |
English PDF |
| GB/T 819.1-2016 |
Countersunk flat head screws with cross recess—Part 1: Property class 4.8 十字槽沉头螺钉 第1部分：4.8级 |
China National Standards cross |
English PDF |
| GB/T 818-2016 |
Pan head screws with cross recess 十字槽盘头螺钉 |
China National Standards cross |
English PDF |
| GB/T 32439-2015 |
cross helically wound steel wires reinforced-polyethylene composite pipelines for water supply 给水用钢丝网增强聚乙烯复合管道 |
China National Standards cross |
English PDF |
| GB/T 32346.3-2015 |
Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 3: Accessories for submarine cables 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第3部分：海底电缆附件 |
China National Standards cross |
English PDF |
| GB/T 32346.2-2015 |
Long AC submarine cables with cross-linked polyethylene insulation and their accessoried for rated voltage of 220kV(Um=252kV)—Part 2: Long AC submarine cables 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第2部分: 大长度交流海底电缆 |
China National Standards cross |
English PDF |
| GB/T 32346.1-2015 |
Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 1: Test methods and requirements 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第1部分：试验方法和要求 |
China National Standards cross |
English PDF |
| GB/T 820-2015 |
Raised countersunk head screws with cross recess 十字槽半沉头螺钉 |
China National Standards cross |
English PDF |
| GB/T 32258-2015 |
Steel cross wedge rollings—General specification 钢质楔横轧件 通用技术条件 |
China National Standards cross |
English PDF |
| GB 50460-2015 |
Code for construction of oil and gas transmission pipeline aerial crossing engineering 油气输送管道跨越工程施工规范 |
China National Standards cross |
English PDF |
| GB/T 32076.7-2015 |
High-strength structural bolting assemblies for preloading—Part 7: M39~M64—Hexagon bolt with large width across flats and nut assemblies 预载荷高强度栓接结构连接副 第7部分：M39~M64 大六角头螺栓和螺母连接副 |
China National Standards cross |
English PDF |
| GB/T 32076.4-2015 |
High-strength structural bolting assemblies for preloading—Part 4: System HV—Hexagon bolt with large width across flats and nut assemblies 预载荷高强度栓接结构连接副 第4部分：HV型 大六角头螺栓和螺母连接副 |
China National Standards cross |
English PDF |
| GB/T 32076.3-2015 |
High-strength structural bolting assemblies for preloading—Part 3: System HR—Hexagon bolt with large width across flats and nut assemblies 预载荷高强度栓接结构连接副 第3部分：HR型 大六角头螺栓和螺母连接副 |
China National Standards cross |
English PDF |
| GB/T 18890.3-2015 |
Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV（Um=252 kV）—Part 3: Accessories 额定电压220kV（Um=252 kV）交联聚乙烯绝缘电力电缆及其附件 第3部分：电缆附件 |
China National Standards cross |
English PDF |
| GB/T 18890.2-2015 |
Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV（Um=252 kV）—Part 2: Power cables 额定电压220kV（Um=252 kV）交联聚乙烯绝缘电力电缆及其附件 第2部分：电缆 |
China National Standards cross |
English PDF |
| GB/T 18890.1-2015 |
Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV（Um=252 kV）—Part 1: Test methods and requirements 额定电压220kV（Um=252 kV）交联聚乙烯绝缘电力电缆及其附件 第1部分：试验方法和要求 |
China National Standards cross |
English PDF |
| GB/T 31871-2015 |
ebXML based cross dock despatch 基于ebXML的越库配送通知 |
China National Standards cross |
English PDF |
| GB/T 31586.2-2015 |
Corrosion protection of steel structures by protective paint systems—Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating—Part 2: cross-cut testing and X-cut testing 防护涂料体系对钢结构的防腐蚀保护 涂层附着力/内聚力（破坏强度）的评定和验收准则 第2部分：划格试验和划叉试验 |
China National Standards cross |
English PDF |
| GB 50424-2015 |
Code for construction of oil and gas transmission pipeline crossing engineering 油气输送管道穿越工程施工规范 |
China National Standards cross |
English PDF |
| GB/T 31541-2015 |
Test method for interfacial bond strength of fine ceramic materials—cross-bonded 精细陶瓷界面拉伸和剪切粘结强度试验方法 十字交叉法 |
China National Standards cross |
English PDF |
| GB/T 31557-2015 |
High speed CNC gantry-type engraving and milling machine with fixed crossbeam 高速数控定梁龙门雕铣机 |
China National Standards cross |
English PDF |
| GB 31145-2014 |
Safety of woodworking machines—Circular saw benches/up-cutting cross-cut sawing machines 木工机床安全 带上切式横截手动进给圆锯机 |
China National Standards cross |
English PDF |
| GB/T 11017.3-2014 |
Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV（Um=126 kV）―Part 3: Accessories 额定电压110kV（Um=126kV）交联聚乙烯绝缘电力电缆及其附件 第3部分：电缆附件 |
China National Standards cross |
English PDF |
| GB/T 11017.2-2014 |
Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV（Um=126 kV）—Part 2: Power cables 额定电压110kV（Um=126kV） 交联聚乙烯绝缘电力电缆及其附件 第2部分: 电缆 |
China National Standards cross |
English PDF |
| GB/T 11017.1-2014 |
Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV（Um=126 kV）―Part 1: Test methods and requirements 额定电压110kV（Um=126kV）交联聚乙烯绝缘电力电缆及其附件 第1部分：试验方法和要求 |
China National Standards cross |
English PDF |
| GB/T 6562-2014 |
cross recessed raised countersunk head thread rolling screws 十字槽半沉头自挤螺钉 |
China National Standards cross |
English PDF |
| GB/T 6561-2014 |
cross recessed countersunk head thread rolling screws 十字槽沉头自挤螺钉 |
China National Standards cross |
English PDF |
| GB/T 6560-2014 |
cross recessed pan head thread rolling screws 十字槽盘头自挤螺钉 |
China National Standards cross |
English PDF |
| GB/T 30479-2013 |
Woodworking machines―crosswise veneer splicing machines―Nomenclature 木工机床 横向拼板机 术语 |
China National Standards cross |
English PDF |
| GB/T 30467-2013 |
Conversion rule for specific heat consumption and throughput of across-flow grain dryer 横流粮食干燥机单位耗热量与处理量折算规则 |
China National Standards cross |
English PDF |
| GB 50423-2013 |
Code for design of oil and gas transportation pipeline crossing engineering 油气输送管道穿越工程设计规范 |
China National Standards cross |
English PDF |
| GB/T 4893.4-2013 |
Test of surface coatings of furniture - Part 4：Determination of adhesion - cross cut 家具表面漆膜理化性能试验 第4部分：附着力交叉切割测定法 |
China National Standards cross |
English PDF |
| GB/T 29762-2013 |
Carbon fibre - Determination of filament diameter and cross-section area 碳纤维 纤维直径和横截面积的测定 |
China National Standards cross |
English PDF |
| GB/T 29.2-2013 |
Hexagon bolts with cross recess on head 六角头带十字槽螺栓 |
China National Standards cross |
English PDF |
| GB/T 25922-2010 |
Measurement of fluid flow in closed conduits - Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full 封闭管道中流体流量的测量 用安装在充满流体的圆形截面管道中的涡街流量计测量流量的方法 |
China National Standards cross |
English PDF |
| GB/T 26027-2010 |
Aluminium and aluminium alloys drawn seamless tubes for large circumscribed circle diameter of cross section 铝及铝合金大规格拉制无缝管 |
China National Standards cross |
English PDF |
| GB/T 10051.9-2010 |
Lifting hooks - Part 9: cross pieces 起重吊钩 第9部分：吊钩横梁 |
China National Standards cross |
English PDF |
| GB/T 10051.8-2010 |
Lifting hooks - Part 8: Blanks of cross pieces for hooks 起重吊钩 第8部分：吊钩横梁毛坯件 |
China National Standards cross |
English PDF |
| GB/T 25699-2010 |
Belt crossflow pellet feed dryer 带式横流颗粒饲料干燥机 |
China National Standards cross |
English PDF |
| GB/T 25661.2-2010 |
Plano-machining centres with traveling overhead cross rail - Part 2: Specifications 高架横梁移动龙门加工中心 第2部分：技术条件 |
China National Standards cross |
English PDF |
| GB/T 25661.1-2010 |
Plano-machining centres with traveling overhead cross rail - Part 1: Testing of the accuracy 高架横梁移动龙门加工中心 第1部分：精度检验 |
China National Standards cross |
English PDF |
| GB/T 25658.2-2010 |
Copying type CNC plano-boring and milling machines with a fixed cross rail - Part 2: Specifications 数控仿形定梁龙门镗铣床 第2部分：技术条件 |
China National Standards cross |
English PDF |
| GB/T 25658.1-2010 |
Copying type CNC plano-boring and milling machines with a fixed cross rail - Part 1: Testing of the accuracy 数控仿形定梁龙门镗铣床 第1部分：精度检验 |
China National Standards cross |
English PDF |
| GB/T 25126-2010 |
Large capacity cross-electromagnetic four-way reversing valve 大容量交叉式电磁四通换向阀 |
China National Standards cross |
English PDF |
| GB/T 25068.5-2010 |
Information technology - Security techniques - IT network security - Part 5: Securing communications across networks using virtual private networks 信息技术 安全技术 IT网络安全 第5部分：使用虚拟专用网的跨网通信安全保护 |
China National Standards cross |
English PDF |
| GB/T 24776-2009 |
Grouping and read-across methods of chemicals 化学物质分组和交叉参照法 |
China National Standards cross |
English PDF |
| GB/T 4061-2009 |
Polycrystalline silicon-examination method-assessment of sandwiches on cross-section by chemical corrosion 硅多晶断面夹层化学腐蚀检验方法 |
China National Standards cross |
English PDF |
| GB/T 24349.6-2009 |
Textile machinery and accessories - Cylindrical tubes - Part 6: Dimensions, tolerances and designation of tubes for cross wound packages in winding and twisting 纺织机械与附件 圆柱形筒管 第6部分：卷绕和加捻用交叉卷绕筒管的尺寸、偏差和标记 |
China National Standards cross |
English PDF |
| GB/T 24298-2009 |
Standard test method for cross curvature of thermostat metals 热双金属横向弯曲试验方法 |
China National Standards cross |
English PDF |
| GB 50459-2009 |
Code for design of oil and gas transportation pipeline aerial crossing engineering 油气输送管道跨越工程设计规范 |
China National Standards cross |
English PDF |
| GB/T 9330.3-2008 |
Plastic insulated control cables - Part 3: cross-linked polyethylene insulated control cables 塑料绝缘控制电缆 第3部分：交联聚乙烯绝缘控制电缆 |
China National Standards cross |
English PDF |
| GB/T 13933-2008 |
Miniature cross-flow fan 小型贯流式通风机 |
China National Standards cross |
English PDF |
| GB/T 450-2008 |
Paper and board－Sampling for testing and identification of machine and cross direction, wire side and felt side 纸和纸板试样的采取及试样纵横向、正反面的测定 |
China National Standards cross |
English PDF |
| GB/T 22078.3-2008 |
Power cables with cross-linked polyethylene insulation and theiraccessories for rated voltage of 500kV(Um=550kV) - Part 3: Accessories for power cables with cross-linked polyethylene insulation for rated voltage of 500kV (Um=550kV) 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 第3部分: 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆附件 |
China National Standards cross |
English PDF |
| GB/T 22078.2-2008 |
Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 500kV (Um=550kV) - Part2: Power cables with cross-linked polyethylene insulation for rated voltage of 500kV (Um=550kV) 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 第2部分: 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆 |
China National Standards cross |
English PDF |
| GB/T 22078.1-2008 |
Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 500kV(Um=550kV) - Part 1: Power cable systems-cables with cross-linked polyethylene insulation and their accessories for rated voltage of 500kV (Um=550kV) - 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 第1部分: 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 试验方法和要求 |
China National Standards cross |
English PDF |
| GB/T 22051-2008 |
Cold-expansion fittings with sliding compression-sleeves for cross-linked polyethylene(PE-X) pipe 交联聚乙烯(PE-X)管用滑紧卡套冷扩式管件 |
China National Standards cross |
English PDF |
| GB/T 5641-2008 |
Flared couplings - Union cross 扩口式四通管接头 |
China National Standards cross |
English PDF |
| GB/T 3746-2008 |
24° cone connectors - Union cross 卡套式四通管接头 |
China National Standards cross |
English PDF |
| GB/T 2624.4-2006 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes 用安装在圆形截面管道中的差压装置测量满管流体流量 第4部分：文丘里管 |
China National Standards cross |
English PDF |
| GB/T 2624.3-2006 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles 用安装在圆形截面管道中的差压装置测量满管流体流量 第3部分：喷嘴和文丘里喷嘴 |
China National Standards cross |
English PDF |
| GB/T 2624.2-2006 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates 用安装在圆形截面管道中的差压装置测量满管流体流量 第2部分：孔板 |
China National Standards cross |
English PDF |
| GB/T 2624.1-2006 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements 用安装在圆形截面管道中的差压装置测量满管流体流量 第1部分：一般原理和要求 |
China National Standards cross |
English PDF |
| GB/T 20035.5-2005 |
Textile machinery and accessories -- Cones for cross winding -- Part 5: Dimensions,tolerances and designation of cones with half angle 5°57′ 纺织机械与附件 交叉卷绕用圆锥形筒管 第5部分：半锥角5°57′圆锥形筒管的尺寸、公差和标记 |
China National Standards cross |
English PDF |
| GB/T 20035.4-2005 |
Textile machinery and accessories -- Cones for cross winding -- Part 4: Dimensions,tolerances and designation of cones with half angle 4°20′for winding for dyeing purposes 纺织机械与附件 交叉卷绕用圆锥形筒管 第4部分：半锥角4°20′染色用圆锥形筒管的尺寸、公差和标记 |
China National Standards cross |
English PDF |
| GB/T 20035.3-2005 |
Textile machinery and accessories -- Cones for cross winding -- Part 3: Dimensions,tolerances and designation of cones with half angle 4°20′ 纺织机械与附件 交叉卷绕用圆锥形筒管 第3部分：半锥角4°20′圆锥形筒管的尺寸、公差和标记 |
China National Standards cross |
English PDF |
| GB/T 20035.2-2005 |
Textile machinery and accessories -- Cones for cross winding -- Part2: Dimensions,tolerances and designation of cones with half angle 3°30′ 纺织机械与附件 交叉卷绕用圆锥形筒管 第2部分：半锥角3°30′圆锥形筒管的尺寸、公差和标记 |
China National Standards cross |
English PDF |
| GB/T 20035.1-2005 |
Textile machinery and accessories -- Cones for cross winding -- Part 1: Recommended main dimensions 纺织机械与附件 交叉卷绕用圆锥形筒管 第1部分：主要尺寸推荐值 |
China National Standards cross |
English PDF |
| GB/T 3452.1-2005 |
Fluid power systems-O-rings-Part 1:Inside diameters,cross-sections,tolerances and size identification code 液压气动用O形橡胶密封圈 第1部分:尺寸系列及公差 |
China National Standards cross |
English PDF |
| GB/T 19556-2004 |
Textile machinery and accessories--Pirn winders and cross winders--Definition of left and right sides 纺织机械与附件 卷纬机和交叉卷绕络筒机 左右侧定义 |
China National Standards cross |
English PDF |
| GB/T 9074.5-2004 |
cross recessed small pan head screw andwasher assemblies with plain washers 十字槽小盘头螺钉和平垫圈组合件 |
China National Standards cross |
English PDF |
| GB/T 9074.20-2004 |
cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers 十字槽凹穴六角头自攻螺钉和平垫圈组合件 |
China National Standards cross |
English PDF |
| GB/T 5291.2-2003 |
Die sinking electro-discharge machines(EDM)----Testin of accuracy----Part 2:Two column machines(Slide-head type and cross-slide table type) 电火花成形机 精度检验 第2部分:双立柱机床(移动主轴头型和十字工作台型) |
China National Standards cross |
English PDF |
| GB/T 5290.2-2003 |
Die sinking electro-discharge machines(EDM)----Parameters----Part 2:Two column machines (Slide-head type and cross slide table type) 电火花成形机 参数 第2部分:双立柱机床 (移动主轴头型和十字工作台型) |
China National Standards cross |
English PDF |
| GB/T 1563-2003 |
Taper keys--cross section dimensions of keyways 楔键 键槽的剖面尺寸 |
China National Standards cross |
English PDF |
| GB/T 18992.2-2003 |
crosslinked polyethylene(PE-X) piping systems for hot and cold water installations--Part 2: Pipes 冷热水用交联聚乙烯(PE-X)管道系统 第2部分:管材 |
China National Standards cross |
English PDF |
| GB/T 18992.1-2003 |
crosslinked polyethylene(PE-X) piping systems for hot and cold water installations--Part 1: General 冷热水用交联聚乙烯(PE-X)管道系统 第1部分:总则 |
China National Standards cross |
English PDF |
| GB/T 15856.3-2002 |
cross recessed raised countersunk head drilling screws with tapping screw thread 十字槽半沉头自钻自攻螺钉 |
China National Standards cross |
English PDF |
| GB/T 15856.2-2002 |
cross recessed countersunk head drilling screws 十字槽沉头自钻自攻螺钉 |
China National Standards cross |
English PDF |
| GB/T 15856.1-2002 |
cross recessed pan head drilling screws with tapping screw thread 十字槽盘头自钻自攻螺钉 |
China National Standards cross |
English PDF |
| GB/T 18474-2001 |
Pipes and fittings made of crosslinked polyethylene(PE-X)--Estimation of the degree of crosslinkingby determination of the gel content 交联聚乙烯(PE-X)管材与管件 交联度的试验方法 |
China National Standards cross |
English PDF |
| GB/T 5291.1-2001 |
Die sinking electro-discharge machines(EDM)--Testing of accuracy--Part 1:Single column machines (cross slide table type and fixed table type) 电火花成形机 精度检验 第1部分:单立柱机床(十字工作台型和固定工作台型) |
China National Standards cross |
English PDF |
| GB/T 5290.1-2001 |
Diesinking electro-discharge machines(EDM)--Parameters--Part 1:Single column machines(cross slide table type and fixed table type) 电火花成形机 参数 第1部分:单立柱机床(十字工作台型和固定工作台型) |
China National Standards cross |
English PDF |
| GB/T 18230.4-2000 |
Hexagon nuts for structural boltingwith large width across flats，style 1--Product grade B--Property class 10 栓接结构用1型大六角螺母 B级 10级 |
China National Standards cross |
English PDF |
| GB/T 18230.3-2000 |
Hexagon nuts for high-strength structural bolting with large width across flats--Product grade B--Property classes8 and 10 栓接结构用大六角螺母 B级 8和10级 |
China National Standards cross |
English PDF |
| GB/T 18230.2-2000 |
Hexagon bolts forhigh-strength structural bolting with large width across flats(short thread length)--Product grade C--Property classes 8.8 and 10.9 栓接结构用大六角头螺栓 短螺纹长度 C级 8.8和10.9级 |
China National Standards cross |
English PDF |
| GB/T 18230.1-2000 |
Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)--Product grade C--Property classes 8.8 and 10.9 栓接结构用大六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级 |
China National Standards cross |
English PDF |
| GB/T 822-2000 |
Cheese head screws with cross recess 十字槽圆柱头螺钉 |
China National Standards cross |
English PDF |
| GB/T 819.1-2000 |
Countersunk flat head screws(common head style)with cross recess--Part 1:Steel of property class 4.8 十字槽沉头螺钉 第1部分:钢4.8级 |
China National Standards cross |
English PDF |
| GB/T 818-2000 |
Pan head screws with cross recess 十字槽盘头螺钉 |
China National Standards cross |
English PDF |
| GB/T 9286-1998 |
Paints and varnishes--cross cut test for films 色漆和清漆 漆膜的划格试验 |
China National Standards cross |
English PDF |
| GB/T 7076-1997 |
Textiles--Tests for colour fastness--Colour fastness to cross-dyeing:Wool 纺织品 色牢度试验 耐交染色牢度:羊毛 |
China National Standards cross |
English PDF |
| GB/T 819.2-1997 |
cross recessed countersunk flat head screws(common head style)--Grade A--Part 2:Steel ofproperty class 8.8，stainless steel and non-ferrous metals 十字槽沉头螺钉 第2部分:钢8.8、不锈钢A2-70和有色金属CU2或CU3 |
China National Standards cross |
English PDF |
| GB/T 5279.2-1997 |
Countersunk flat head screws--Part 2:Penetration depth of cross recesses 沉头螺钉 第2部分:十字槽插入深度 |
China National Standards cross |
English PDF |
| GB/T 1965-1996 |
Test method for cross-bending strength of porous ceramic 多孔陶瓷弯曲强度试验方法 |
China National Standards cross |
English PDF |
| GB/T 2833-1996 |
Test method for cross-bending strength of vitrified pipe 陶管弯曲强度试验方法 |
China National Standards cross |
English PDF |
| GB/T 13806.2-1992 |
Fasteners for fine mechanics--cross recessed tapping screws--Scrape point 精密机械用紧固件 十字槽自攻螺钉 刮削端 |
China National Standards cross |
English PDF |
| GB/T 13806.1-1992 |
Fasteners for fine mechanics--cross recessed screws 精密机械用紧固件 十字槽螺钉 |
China National Standards cross |
English PDF |
| GB 10494-1989 |
Technical specification for crossing signal equipment in wayside 铁路区间道口信号设备技术条件 |
China National Standards cross |
English PDF |
| GB 10493-1989 |
Technical specification for crossing signal equipment within the station 铁路站内道口信号设备技术条件 |
China National Standards cross |
English PDF |
| GB/T 9456-1988 |
cross recessed hexagon head tapping screws withindentation 十字槽凹穴六角自攻螺钉 |
China National Standards cross |
English PDF |
| GB/T 9074.9-1988 |
cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies 十字槽沉头螺钉和锥形锁紧垫圈组合件 |
China National Standards cross |
English PDF |
| GB/T 9074.8-1988 |
cross recessed small pan headscrew，single coil spring lock washer and plain washer assemblies 十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件 |
China National Standards cross |
English PDF |
| GB/T 9074.7-1988 |
cross recessed small pan head screw and single coil spring lock washer assemblies 十字槽小盘头螺钉和弹簧垫圈组合件 |
China National Standards cross |
English PDF |
| GB/T 9074.4-1988 |
cross recessed pan head screw，single coil spring lock washer and plain washer assemblies 十字槽盘头螺钉，弹簧垫圈和平垫圈组合件 |
China National Standards cross |
English PDF |
| GB/T 9074.3-1988 |
cross recessed pan head screw and single coil spring lock washer assemblies 十字槽盘头螺钉和弹簧垫圈组合件 |
China National Standards cross |
English PDF |
| GB/T 9074.2-1988 |
cross recessed pan head screw andserrated lock washer external teeth assemblies 十字槽盘头螺钉和外锯齿锁紧垫圈组合件 |
China National Standards cross |
English PDF |
| GB/T 9074.13-1988 |
cross recessed hexagon bolt with indentation，single coil lock washer and plain washer assemblies 十字槽凹穴六角头螺栓，弹簧垫圈和平垫圈组合件 |
China National Standards cross |
English PDF |
| GB/T 9074.12-1988 |
cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies 十字槽凹穴六角头螺栓和弹簧垫圈组合件 |
China National Standards cross |
English PDF |
| GB/T 9074.11-1988 |
cross recessed hexagon bolt with indentation and plain washer assemblies 十字槽凹穴六角头螺栓和平垫圈组合件 |
China National Standards cross |
English PDF |
| GB/T 9074.10-1988 |
cross recessed raised countersunkhead screw and countersunk external toothed lock washer assemblies 十字槽半沉头螺钉和锥形锁紧垫圈组合件 |
China National Standards cross |
English PDF |
| GB/T 952-1986 |
cross recessed raised countersunk head wood screws 十字槽半沉头木螺钉 |
China National Standards cross |
English PDF |
| GB/T 951-1986 |
cross recessed countersunk head wood screws 十字槽沉头木螺钉 |
China National Standards cross |
English PDF |
| GB/T 950-1986 |
cross recessed round head wood screws 十字槽圆头木螺钉 |
China National Standards cross |
English PDF |
| GB/T 5441.6-1985 |
Test methods for communication cable--crosstalk attenuation test--Comparison method 通信电缆试验方法 串音衰减试验 比较法 |
China National Standards cross |
English PDF |
| GB/T 944.1-1985 |
cross recesses for screws 螺钉用十字槽 |
China National Standards cross |
English PDF |
| GB/T 847-1985 |
cross recessed raised countersunk head tapping screws 十字槽半沉头自攻螺钉 |
China National Standards cross |
English PDF |
| GB/T 846-1985 |
cross recessed countersunk head tapping screws 十字槽沉头自攻螺钉 |
China National Standards cross |
English PDF |
| GB/T 845-1985 |
cross recessed pan head tapping screws 十字槽盘头自攻螺钉 |
China National Standards cross |
English PDF |
| GB/T 3104-1982 |
Fasteners--Widths across flats of hexagon products 紧固件 六角产品的对边宽度 |
China National Standards cross |
English PDF |
| GB/T 974-1976 |
Screws，cross recessed，120° raised countersunkhead 十字槽120°半沉头螺钉 |
China National Standards cross |
English PDF |
| GB/T 973-1976 |
Screws，cross recessed，oval head 十字槽扁圆头螺钉 |
China National Standards cross |
English PDF |
| Find out:191Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
