Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 37400.18-2023 |
General technical conditions for heavy machinery Part 18: Open gear transmission system {译} 重型机械通用技术条件 第18部分：开式齿轮传动系统 |
China National Standards gear |
 English PDF |
| GB/T 28819-2023 |
Aluminum alloy housing for inflatable high-voltage switchgear {译} 充气高压开关设备用铝合金外壳 |
China National Standards gear |
English PDF |
| GB/T 6963-2023 |
Quantities, units and symbols of fishing gear and fishing gear materials {译} 渔具与渔具材料量、单位及符号 |
China National Standards gear |
English PDF |
| GB/T 3939.2-2023 |
Naming and marking of main fishing gear materials Part 2: Netting {译} 主要渔具材料命名与标记 第2部分：网片 |
China National Standards gear |
English PDF |
| GB/T 3939.1-2023 |
Naming and marking of main fishing gear materials Part 1: Net lines {译} 主要渔具材料命名与标记 第1部分： 网线 |
China National Standards gear |
English PDF |
| GB/T 23930-2023 |
Three wheel vehicle steering gear {译} 三轮汽车 转向器 |
China National Standards gear |
English PDF |
| GB/T 14048.1-2023 |
Low-voltage switchgear and controlgear Part 1: General {译} 低压开关设备和控制设备 第1部分：总则 |
China National Standards gear |
English PDF |
| GB/Z 43147-2023 |
Bevel gear design suggestions {译} 锥齿轮设计建议 |
China National Standards gear |
English PDF |
| GB/Z 43030-2023 |
Low voltage switchgear and control equipment Cybersecurity {译} 低压开关设备和控制设备 网络安全 |
China National Standards gear |
English PDF |
| GB/Z 43029-2023 |
Low-voltage switchgear and control equipment and their complete sets Energy efficiency {译} 低压开关设备和控制设备及其成套设备 能效 |
China National Standards gear |
English PDF |
| GB/T 8542-2023 |
Technical Specifications for High Speed gear Transmissions {译} 高速齿轮传动装置技术规范 |
China National Standards gear |
English PDF |
| GB/T 43146-2023 |
Bevel and hypoid gear geometry {译} 锥齿轮和准双曲面齿轮几何学 |
China National Standards gear |
English PDF |
| GB/T 42941.1-2023 |
Sports protective gear Combat sports protective gear Part 1: General requirements and test methods {译} 运动护具 搏击运动护具 第1部分：通用要求与试验方法 |
China National Standards gear |
English PDF |
| GB/T 7251.2-2023 |
Low voltage switchgear and control equipment complete sets Part 2: Power switchgear and control equipment complete sets {译} 低压成套开关设备和控制设备 第2部分：成套电力开关和控制设备 |
China National Standards gear |
English PDF |
| GB/T 7251.1-2023 |
Low-voltage switchgear and controlgear complete sets Part 1: General provisions {译} 低压成套开关设备和控制设备 第1部分：总则 |
China National Standards gear |
English PDF |
| GB/T 17879-2023 |
gears - chemical etching test for surface tempering after grinding {译} 齿轮 磨削后表面回火的化学浸蚀检验 |
China National Standards gear |
English PDF |
| GB/T 10095.2-2023 |
Cylindrical gear ISO tooth surface tolerance classification system Part 2: Definition and allowable value of radial comprehensive deviation {译} 圆柱齿轮 ISO齿面公差分级制 第2部分：径向综合偏差的定义和允许值 |
China National Standards gear |
English PDF |
| GB/T 39545.4-2023 |
Design and selection of components for enclosed gear drives - Part 4: Balance classes for flexible couplings {译} 闭式齿轮传动装置的零部件设计和选择 第4部分：挠性联轴器平衡等级 |
China National Standards gear |
English PDF |
| GB/T 42321-2023 |
Additional requirements for 3.6 kV to 40.5 kV pole-mounted metal-enclosed switchgear with internal arc category {译} 具有内部电弧类别的3.6 kV～40.5 kV柱上安装金属封闭开关设备的附加要求 |
China National Standards gear |
English PDF |
| GB/T 41526.1-2022 |
Sports protective gear - Ice and snow sports protective gear - Part 1: Safety requirements and test methods for ski sports helmets {译} 运动护具 冰雪运动护具 第1部分：滑雪运动头盔的安全要求和试验方法 |
China National Standards gear |
English PDF |
| GB/T 39545.1-2022 |
Design and selection of components for enclosed gear drives - Part 1: Common components {译} 闭式齿轮传动装置的零部件设计和选择 第1部分：通用零部件 |
China National Standards gear |
English PDF |
| GB/Z 41909-2022 |
Low-voltage switchgear and controlgear EMC assessment of switchgear and controlgear and their assemblies {译} 低压开关设备和控制设备 开关设备和控制设备及其成套设备的EMC评估 |
China National Standards gear |
English PDF |
| GB/Z 41912-2022 |
Low-Voltage Switchgear and Controlgear Embedded Software Development Guide {译} 低压开关设备和控制设备 嵌入式软件开发指南 |
China National Standards gear |
English PDF |
| GB/T 14048.22-2022 |
Low-voltage switchgear and controlgear - Part 7-4: Auxiliary devices - PCB terminal blocks for copper conductors {译} 低压开关设备和控制设备 第7-4部分：辅助器件 铜导体的PCB接线端子排 |
China National Standards gear |
English PDF |
| GB/T 14048.23-2022 |
Low-voltage switchgear and controlgear - Part 9-1: Arc fault active suppression systems - Arc extinguishing devices {译} 低压开关设备和控制设备 第9-1部分：电弧故障主动抑制系统 灭弧电器 |
China National Standards gear |
English PDF |
| GB/T 41996-2022 |
Switchgear digital workshop operation management model guide {译} 开关设备数字化车间运行管理模型指南 |
China National Standards gear |
English PDF |
| GB/T 24825-2022 |
Performance specification for DC or AC electronic control gear for LED modules {译} LED模块用直流或交流电子控制装置 性能规范 |
China National Standards gear |
English PDF |
| GB/T 10095.1-2022 |
Cylindrical gears - ISO tooth surface tolerance classification system - Part 1: Definition and permissible values of tooth surface deviations {译} 圆柱齿轮 ISO齿面公差分级制 第1部分：齿面偏差的定义和允许值 |
China National Standards gear |
English PDF |
| GB/Z 13672-2022 |
Test method for bearing capacity of gear bonding {译} 齿轮胶合承载能力试验方法 |
China National Standards gear |
English PDF |
| GB/T 40534-2021 |
Ships and marine technology—Loose gear of lifting appliances on ships—Hooks 船舶与海洋技术 船用起重设备可拆卸零部件 吊钩 |
China National Standards gear |
English PDF |
| GB/T 40533-2021 |
Ships and marine technology—Loose gear of lifting appliances on ships—Pulleys 船舶与海洋技术 船用起重设备可拆卸零部件 滑轮装置 |
China National Standards gear |
English PDF |
| GB/T 40495-2021 |
Ships and marine technology—Loose gear for marine lifting appliances on ships—General technical requirement 船舶和海上技术 船用起重设备可拆卸零部件 一般技术要求 |
China National Standards gear |
English PDF |
| GB/T 14230-2021 |
Test method of tooth bending strength for gear load capacity 齿轮弯曲疲劳强度试验方法 |
China National Standards gear |
English PDF |
| GB/T 14229-2021 |
Test method of surface contact strength for gear load capacity 齿轮接触疲劳强度试验方法 |
China National Standards gear |
English PDF |
| GB/T 3480.5-2021 |
Calculation of load capacity of spur and helical gears—Part 5:Strength and quality of materials 直齿轮和斜齿轮承载能力计算 第5部分：材料的强度和质量 |
China National Standards gear |
English PDF |
| GB/T 22148.3-2021 |
Test method on electromagnetic emissions—Part 3:Electronic control gear for LED modules 电磁发射的试验方法 第3部分：LED模块用电子控制装置 |
China National Standards gear |
English PDF |
| GB/T 3480.3-2021 |
Calculation of load capacity of spur and helical gears—Part 3: Calculation of tooth bending strength 直齿轮和斜齿轮承载能力计算 第3部分：轮齿弯曲强度计算 |
China National Standards gear |
English PDF |
| GB/T 14231-2021 |
Determination of efficiency for gear units 齿轮装置效率测定方法 |
China National Standards gear |
English PDF |
| GB/T 3480.2-2021 |
Calculation of load capacity of spur and helical gears—Part 2: Calculation of surface durability (pitting) 直齿轮和斜齿轮承载能力计算 第2部分：齿面接触强度（点蚀）计算 |
China National Standards gear |
English PDF |
| GB/T 32483.2-2021 |
Energy performance of lamp controlgear—Part 2:Controlgear for high intensity discharge lamps(excluding fluorescent lamps)—Method of measurement to determine the efficiency of controlgear 灯控制装置的效率要求 第2部分:高压放电灯（荧光灯除外） 控制装置效率的测量方法 |
China National Standards gear |
English PDF |
| GB/T 30104.201-2021 |
Digital addressable lighting interface—Part 201:Particular requirements for control gear—Fluorescent lamps(device type 0) 数字可寻址照明接口 第201部分：控制装置的特殊要求 荧光灯(设备类型0) |
China National Standards gear |
English PDF |
| GB/T 30104.102-2021 |
Digital addressable lighting interface—Part 102: General requirements—Control gear 数字可寻址照明接口 第102部分：一般要求 控制装置 |
China National Standards gear |
English PDF |
| GB/T 19334-2021 |
Dimensions of low-voltage switchgear and controlgear—Standardized mounting on rails for mechanical support of switchgear,controlgear and accessories 低压开关设备和控制设备的尺寸 在开关设备和控制设备及其附件中作机械支承的标准安装轨 |
China National Standards gear |
English PDF |
| GB/T 40701-2021 |
Electric multiple units gear oils 动车组驱动齿轮箱润滑油 |
China National Standards gear |
English PDF |
| GB/T 40729-2021 |
Fatigue life test method for precision gear transmission 精密齿轮传动装置疲劳寿命试验方法 |
China National Standards gear |
English PDF |
| GB/T 24621.1-2021 |
Application guide for electric safety of low-voltage switchgear and controlgear assemblies—Part 1: switchgear assemblies 低压成套开关设备和控制设备的电气安全应用指南 第1部分：成套开关设备 |
China National Standards gear |
English PDF |
| GB/T 15144-2020 |
AC and/or DC-supplied electronic control gear for tubular fluorescent lamps—Performance requirements 管形荧光灯用交流和/或直流电子控制装置 性能要求 |
China National Standards gear |
English PDF |
| GB/T 14048.2-2020 |
Low-voltage switchgear and controlgear—Part 2: Circuit-breakers 低压开关设备和控制设备 第2部分：断路器 |
China National Standards gear |
English PDF |
| GB/T 14048.4-2020 |
Low-voltage switchgear and controlgear—Part 4-1: Contactors and motor-starters—Electromechanical contactors and motor-starters (Including motor protector) 低压开关设备和控制设备 第4-1部分：接触器和电动机起动器 机电式接触器和电动机起动器（含电动机保护器） |
China National Standards gear |
English PDF |
| GB/T 38918-2020 |
Civil airplane landing gear structure design and simulation 民用飞机起落架结构设计与仿真 |
China National Standards gear |
English PDF |
| GB/T 38805-2020 |
Technical requirements of heat treatment for heavy duty gears 重载齿轮热处理技术要求 |
China National Standards gear |
English PDF |
| GB/T 38658-2020 |
Guidance for the extension of validity of type tests of AC metal enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV 3.6 kV～40.5 kV交流金属封闭开关设备和控制设备型式试验有效性的延伸导则 |
China National Standards gear |
English PDF |
| GB/T 3906-2020 |
Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV 3.6 kV～40.5 kV交流金属封闭开关设备和控制设备 |
China National Standards gear |
English PDF |
| GB/T 11022-2020 |
Common specifications for high-voltage alternating-current switchgear and controlgear standards 高压交流开关设备和控制设备标准的共用技术要求 |
China National Standards gear |
English PDF |
| GB/T 39545.3-2020 |
Design and selection of components for enclosed gear drives—Part 3: Shaft-to-hub juncture with keyless fits 闭式齿轮传动装置的零部件设计和选择 第3部分：轴和轮毂的无键配合连接 |
China National Standards gear |
English PDF |
| GB/T 39430-2020 |
Specifications for the blanks of high reliability gears 高可靠性齿轮毛坯技术要求 |
China National Standards gear |
English PDF |
| GB/T 39332-2020 |
General requirements for the anti-fatigue manufacturing of precision gears 高精度齿轮抗疲劳制造通用技术要求 |
China National Standards gear |
English PDF |
| GB/T 7674-2020 |
Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above 额定电压72.5kV及以上气体绝缘金属封闭开关设备 |
China National Standards gear |
English PDF |
| GB/T 7251.8-2020 |
Low-voltage switchgear and controlgear assemblies—Part 8: General technical requirements for intelligent assembly 低压成套开关设备和控制设备 第8部分：智能型成套设备通用技术要求 |
China National Standards gear |
English PDF |
| GB/T 3480.1-2019 |
Calculation of load capacity of spur and helical gears—Part 1: Basic principles, introduction and general influence factors 直齿轮和斜齿轮承载能力计算 第1部分：基本原理、概述及通用影响系数 |
China National Standards gear |
English PDF |
| GB/T 37786-2019 |
gear steel for numerical control machine tool 数控机床用齿轮钢 |
China National Standards gear |
English PDF |
| GB/T 14048.14-2019 |
Low-voltage switchgear and controlgear—Part 5-5: Control circuit devices and switching elements—Electrical emergency stop device with mechanical latching function 低压开关设备和控制设备 第5-5部分：控制电路电器和开关元件 具有机械锁闩功能的电气紧急制动装置 |
China National Standards gear |
English PDF |
| GB/T 37683-2019 |
Large gear and girth gear forgings—Technical specification 大型齿轮、齿圈锻件 技术条件 |
China National Standards gear |
English PDF |
| GB/T 37682-2019 |
Large exposed gear steel castings—Technical specification 大型开式齿轮铸钢件 技术条件 |
China National Standards gear |
English PDF |
| GB/T 3480.6-2018 |
Calculation of load capacity of spur and helical gears—Part 6:Calculation of service life under variable load 直齿轮和斜齿轮承载能力计算-第6部分：变载荷条件下的使用寿命计算 |
China National Standards gear |
English PDF |
| GB/T 37145-2018 |
Cabinets for low-voltage switchgear—Mechanical structures for drawout functional unit 低压机柜-抽出式功能单元机械结构 |
China National Standards gear |
English PDF |
| GB/T 37161-2018 |
gears—Evaluation of instruments for measurement of individual gears 齿轮-齿轮测量仪的评价 |
China National Standards gear |
English PDF |
| GB/T 24835-2018 |
Regulation of operation and maintenance for 1100kV gas-insulated metal-enclosed switchgear 1100kV气体绝缘金属封闭开关设备运行维护规程 |
China National Standards gear |
English PDF |
| GB/T 11023-2018 |
Test method of SF6 gas tightness for high—voltage switchgear 高压开关设备六氟化硫气体密封试验方法 |
China National Standards gear |
English PDF |
| GB/T 37144-2018 |
Cabinets for low-voltage switchgear—Electrical mechanical structures 低压机柜-电气机械结构 |
China National Standards gear |
English PDF |
| GB/T 35089-2018 |
Precision gear transmission for robot—Test method 机器人用精密齿轮传动装置 试验方法 |
China National Standards gear |
English PDF |
| GB/T 10085-2018 |
Basic paramaters of cylindrical worm gears 圆柱蜗杆传动基本参数 |
China National Standards gear |
English PDF |
| GB 13895-2018 |
Heavy duty gear oils for automobile (GL-5) 重负荷车辆齿轮油(GL-5) |
China National Standards gear |
English PDF |
| GB/T 36491-2018 |
Precision cycloidal pin planetary gear transmission for robot—General technical requirements 机器人用摆线针轮行星齿轮传动装置 通用技术条件 |
China National Standards gear |
English PDF |
| GB/T 24836-2018 |
1100kV gas-insulated metal-enclosed switchgear 1100kV气体绝缘金属封闭开关设备 |
China National Standards gear |
English PDF |
| GB/T 19073-2018 |
Wind turbine—Design requirements for gearbox 风力发电机组 齿轮箱设计要求 |
China National Standards gear |
English PDF |
| GB/T 7251.4-2017 |
Low-voltage switchgear and controlgear assemblies—Part 4: Particular requirements for assemblies for construction sites (ACS) 低压成套开关设备和控制设备 第4部分：对建筑工地用成套设备（ACS）的特殊要求 |
China National Standards gear |
English PDF |
| GB/T 7251.3-2017 |
Low-voltage switchgear and controlgear assemblies—Part 3: Distribution boards intended to be operated by ordinary persons（DBO） 低压成套开关设备和控制设备 第3部分: 由一般人员操作的配电板（DBO） |
China National Standards gear |
English PDF |
| GB/T 14048.5-2017 |
Low-voltage switchgear and controlgear—Part 5-1: Control circuit devices and switching element—Electromechanical control circuit devices 低压开关设备和控制设备 第5-1部分：控制电路电器和开关元件 机电式控制电路电器 |
China National Standards gear |
English PDF |
| GB/T 34884-2017 |
Rolling bearings—Flexible bearings for harmonic drive gear reducers of industrial robots 滚动轴承 工业机器人谐波齿轮减速器用柔性轴承 |
China National Standards gear |
English PDF |
| GB/T 24276-2017 |
A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation 通过计算进行低压成套开关设备和控制设备温升验证的一种方法 |
China National Standards gear |
English PDF |
| GB/T 14048.13-2017 |
Low-voltage switchgear and controlgear—Part 5-3: Control circuit devices and switching elements—Requirements for proximity devices with defined behaviour under fault conditions (PDDB) 低压开关设备和控制设备 第5-3部分：控制电路电器和开关元件 在故障条件下具有确定功能的接近开关（PDDB）的要求 |
China National Standards gear |
English PDF |
| GB/T 7251.5-2017 |
Low-voltage switchgear and controlgear assemblies—Part 5: Assemblies for power distribution in public networks 低压成套开关设备和控制设备 第5部分：公用电网电力配电成套设备 |
China National Standards gear |
English PDF |
| GB/T 22381-2017 |
Cable connections between gas-insulated metal-enclosed switchgear for rated voltages equal to and above 72.5kV and fluid-filled and extruded insulation power cables—Fluid-filled and dry type cable-terminations 额定电压72.5kV及以上气体绝缘金属封闭开关设备与充流体及挤包绝缘电力电缆的连接 充流体及干式电缆终端 |
China National Standards gear |
English PDF |
| GB/T 22382-2017 |
Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above 额定电压72.5 kV 及以上气体绝缘金属封闭开关设备与电力变压器之间的直接连接 |
China National Standards gear |
English PDF |
| GB/T 33977-2017 |
Methods to quantify the steady state, power-frequency electrimagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations 高压成套开关设备和高压/低压预装式变电站产生的稳态、工频电磁场的量化方法 |
China National Standards gear |
English PDF |
| GB/T 33923-2017 |
Design methods for planetary gear drives 行星齿轮传动设计方法 |
China National Standards gear |
English PDF |
| GB/T 33623-2017 |
Rolling bearings—Wind power generators gearbox bearings 滚动轴承 风力发电机组齿轮箱轴承 |
China National Standards gear |
English PDF |
| GB/T 5015-2017 |
gear coupling with elastomer 弹性柱销齿式联轴器 |
China National Standards gear |
English PDF |
| GB/T 33540.2-2017 |
Lubricants for wind turbine—Part 2:Open gear greases 风力发电机组专用润滑剂 第2部分：开式齿轮润滑脂 |
China National Standards gear |
English PDF |
| GB/T 33540.3-2017 |
Lubricants for wind turbine—Part 3: gear oils 风力发电机组专用润滑剂 第3部分：变速箱齿轮油 |
China National Standards gear |
English PDF |
| GB/T 35743-2017 |
Low-voltage switchgear and controlgear—Product data and properties for information exchange 低压开关设备和控制设备 用于信息交换的产品数据与特性 |
China National Standards gear |
English PDF |
| GB/T 14048.22-2017 |
Low-voltage switchgear and controlgear—Part 7-4: Ancillary equipment—PCB terminal blocks for copper conductors 低压开关设备和控制设备 第7-4部分：辅助器件 铜导体的PCB接线端子排 |
China National Standards gear |
English PDF |
| GB/T 35685.1-2017 |
Low-voltage switchgear and controlgear enclosed equipment—Part 1:Enclosed switch-disconnectors to provide isolation during repair and maintenance work 低压封闭式开关设备和控制设备 第1部分：在维修和维护工作中提供隔离功能的封闭式隔离开关 |
China National Standards gear |
English PDF |
| GB/T 14048.3-2017 |
Low-voltage switchgear and controlgear—Part3: Switches，disconnectors，switch-disconnectors and fuse-combination units 低压开关设备和控制设备 第3部分：开关、隔离器、隔离开关及熔断器组合电器 |
China National Standards gear |
English PDF |
| GB/T 14048.12-2016 |
Low-voltage switchgear and controlgear—Part 4-3: Contactors and motor-starters—AC semiconductor controllers and contactors for non-motor loads 低压开关设备和控制设备 第4-3部分：接触器和电动机起动器 非电动机负载用交流半导体控制器和接触器 |
China National Standards gear |
English PDF |
| GB/T 18859-2016 |
Enclosed low-voltage switchgear and controlgear assemblies—Guide for testing under conditions of arcing due to internal fault 封闭式低压成套开关设备和控制设备 在内部故障引起电弧情况下的试验导则 |
China National Standards gear |
English PDF |
| GB/T 33160-2016 |
gear steel for wind power generation 风力发电用齿轮钢 |
China National Standards gear |
English PDF |
| GB/T 7061-2016 |
Low-voltage switchgear and controlgear assemblies in ship 船用低压成套开关设备和控制设备 |
China National Standards gear |
English PDF |
| GB/T 14048.6-2016 |
Low-voltage switchgear and controlgear—Part 4-2: Contactors and motor-starters—AC semiconductor motor controllers and starters (including soft-starters) 低压开关设备和控制设备 第4-2部分：接触器和电动机起动器 交流电动机用半导体控制器和起动器(含软起动器) |
China National Standards gear |
English PDF |
| GB/T 14048.16-2016 |
Low-voltage switchgear and controlgear—Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines 低压开关设备和控制设备 第8部分：旋转电机用装入式热保护(PTC)控制单元 |
China National Standards gear |
English PDF |
| GB/T 32822-2016 |
General specifications for medium-voltage switchgear and controlgear in ships 船用中压开关设备和控制设备通用技术要求 |
China National Standards gear |
English PDF |
| GB/T 14048.10-2016 |
Low-voltage switchgear and controlgear—Part 5-2: Control circuit devices and switching elements—Proximity switches 低压开关设备和控制设备 第5-2部分：控制电路电器和开关元件 接近开关 |
China National Standards gear |
English PDF |
| GB/T 32798-2016 |
XP planetary gear units XP型行星齿轮减速器 |
China National Standards gear |
English PDF |
| GB/T 32580.303-2016 |
Railway applications—Fixed installations—Particular requirements for a.c.switchgear—Part 3-3: Measuement,control and protection devices for specific use in a.c. traction systems—Single-phase inductive voltage transformers 轨道交通 地面装置 交流开关设备的特殊要求 第3-3部分：交流牵引系统专用测量、控制和保护装置 单相感性电压互感器 |
China National Standards gear |
English PDF |
| GB/T 32580.302-2016 |
Railway applications—Fixed installations—Particular requirements for a.c.switchgear—Part 3-2: Measuement,control and protection devices for specific use in a.c. traction systems—Single-phase current transformers 轨道交通 地面装置 交流开关设备的特殊要求 第3-2部分：交流牵引系统专用测量、控制和保护装置 单相电流互感器 |
China National Standards gear |
English PDF |
| GB/T 32580.301-2016 |
Railway applications—Fixed installations—Particular requirements for a.c.switchgear—Part 3-1: Measurement, control and protection devices for specific use in a.c. traction system— Application guide 轨道交通 地面装置 交流开关设备的特殊要求 第3-1部分：交流牵引系统专用测量、控制和保护装置 应用指南 |
China National Standards gear |
English PDF |
| GB/T 32580.2-2016 |
Railway applications—Fixed installations—Particular requirements for a.c. switchgear—Part 2: Single-phase disconnectors，earthing switches and switches with Un above 1KV 轨道交通 地面装置 交流开关设备的特殊要求 第2部分：Un大于1kV的单相隔离开关、接地开关和负荷开关 |
China National Standards gear |
English PDF |
| GB/T 32580.1-2016 |
Railway applications—Fixed installations—Particular requirements for a.c.switchgear—Part 1: Single-phase circuit-breakers with Un above 1 kV 轨道交通 地面装置 交流开关设备的特殊要求 第1部分：Un大于1kV的单相断路器 |
China National Standards gear |
English PDF |
| GB/T 32483.1-2016 |
Energy performance of lamp controlgear—Part 1: Controlgear for fluorescent lamps—Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear 灯控制装置的效率要求 第1部分：荧光灯控制装置 控制装置线路总输入功率和控制装置效率的测量方法 |
China National Standards gear |
English PDF |
| GB/T 14048.8-2016 |
Low-voltage switchgear and controlgear—Part 7-2: Ancillary equipment—Protective conductor terminal blocks for copper conductors 低压开关设备和控制设备 第7-2部分：辅助器件 铜导体的保护导体接线端子排 |
China National Standards gear |
English PDF |
| GB/T 14048.11-2016 |
Low-voltage switchgear and controlgear—Part 6-1: Multiple function equipment—Transfer switching equipment 低压开关设备和控制设备 第6-1部分：多功能电器 转换开关电器 |
China National Standards gear |
English PDF |
| GB/T 6084-2016 |
gear hobs—The general technical specification 齿轮滚刀 通用技术条件 |
China National Standards gear |
English PDF |
| GB/T 6083-2016 |
The basic types and dimensions of gear hobs 齿轮滚刀 基本型式和尺寸 |
China National Standards gear |
English PDF |
| GB/T 32483.3-2016 |
Energy performance of lamp controlgear—Part 3: Controlgear for halogen lamps and LED modules—Method of measurement to determine the efficiency of the controlgear 灯控制装置的效率要求 第3部分：卤钨灯和LED模块 控制装置效率的测量方法 |
China National Standards gear |
English PDF |
| GB/T 2900.20-2016 |
Electrotechnical terminology High-voltage switchgear and controlgear 电工术语 高压开关设备和控制设备 |
China National Standards gear |
English PDF |
| GB/T 14048.7-2016 |
Low-voltage switchgear and controlgear—Part 7-1：Ancillary equipment—Terminal blocks for copper conductors 低压开关设备和控制设备 第7-1部分：辅助器件 铜导体的接线端子排 |
China National Standards gear |
English PDF |
| GB/T 14048.18-2016 |
Low-voltage switchgear and controlgear—Part 7-3: Ancillary equipment—Safety requirements for fuse terminal blocks 低压开关设备和控制设备 第7-3部分：辅助器件 熔断器接线端子排的安全要求 |
China National Standards gear |
English PDF |
| GB/T 10233-2016 |
Basic testing method for low-voltage switchgear and controlgear assemblies 低压成套开关设备和电控设备基本试验方法 |
China National Standards gear |
English PDF |
| GB/T 32256-2015 |
Steel forgings for rings for reduction gears—General specification 钢质减速齿环锻件 通用技术条件 |
China National Standards gear |
English PDF |
| GB/T 32254-2015 |
Precision hot forging of straight bevel gear—General specifications 直齿锥齿轮精密热锻件 通用技术条件 |
China National Standards gear |
English PDF |
| GB/T 32253-2015 |
Precision hot forging of straight bevel gear—Structural design specification 直齿锥齿轮精密热锻件 结构设计规范 |
China National Standards gear |
English PDF |
| GB/T 31846-2015 |
Cabinets for high-voltage switchgear—General technical specification 高压机柜 通用技术规范 |
China National Standards gear |
English PDF |
| GB 7251.6-2015 |
Low-voltage switchgear and controlgear assemblies—Part 6: Busbar trunking systems(busways) 低压成套开关设备和控制设备 第6部分：母线干线系统（母线槽） |
China National Standards gear |
English PDF |
| GB/T 31569-2015 |
6-axis simultaneous CNC spiral bevel gear milling machines—Testing of the accuracy 六轴联动数控螺旋锥齿轮铣齿机 精度检验 |
China National Standards gear |
English PDF |
| GB/T 31558-2015 |
5-axis simultaneous CNC spiral bevel gear grinding machines—Testing of the accuracy 五轴联动数控螺旋 锥齿轮磨齿机 精度检验 |
China National Standards gear |
English PDF |
| GB/T 7251.7-2015 |
Low-voltage switchgear and controlgear assemblies—Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicles charging stations 低压成套开关设备和控制设备 第7部分：特定应用的成套设备--如码头、露营地、市集广场、电动车辆充电站 |
China National Standards gear |
English PDF |
| GB/T 31451-2015 |
Aircraft rescue equipment—Landing gear traction hanging rigging 航空器救援设备 起落架挂具 |
China National Standards gear |
English PDF |
| GB/T 7251.10-2014 |
Low-voltage switchgear and controlgear assemblies―Part 10: Guidence to specifying assemblies 低压成套开关设备和控制设备 第10部分：规定成套设备的指南 |
China National Standards gear |
English PDF |
| GB/T 22148.2-2014 |
Test method on electromagnetic emissions―Part 2: Electronic control gear for discharge lamps excluding fluorescent lamps 电磁发射的试验方法 第2部分：放电灯(荧光灯除外)用电子控制装置 |
China National Standards gear |
English PDF |
| GB/T 22148.1-2014 |
Test method on electromagnetic emissions―Part 1: Electronic control gear for single-and double-capped fluorescent lamps 电磁发射的试验方法 第1部分：单端和双端荧光灯用电子控制装置 |
China National Standards gear |
English PDF |
| GB/T 20641-2014 |
Empty enclosures for Low-voltage switchgear and controlgear assemblies―General requirements 低压成套开关设备和控制设备 空壳体的一般要求 |
China National Standards gear |
English PDF |
| GB/T 21207.2-2014 |
Low-voltage switchgear and controlgear―Device profiles for networked industrial devices―Part 2: Root device profiles for starters and similar equipment 低压开关设备和控制设备 入网工业设备描述 第2部分：起动器和类似设备的根设备描述 |
China National Standards gear |
English PDF |
| GB/T 21207.1-2014 |
Low-voltage switchgear and controlgear―Device profiles for networked industrial devices―Part 1: General rules for development of device profiles 低压开关设备和控制设备 入网工业设备描述 第1部分：设备描述编制总则 |
China National Standards gear |
English PDF |
| GB/T 18858.7-2014 |
Low-voltage switchgear and controlgear-controller-device interfaces (CDIs)―Part 7: CompoNet 低压开关设备和控制设备 控制器 设备接口（CDIs） 第7部分：CompoNet |
China National Standards gear |
English PDF |
| GB/T 30819-2014 |
Harmonic drive gear reducres for robots 机器人用谐波齿轮减速器 |
China National Standards gear |
English PDF |
| GB/T 30569-2014 |
Structural design specification for precision cold forging of straight bevel gear 直齿锥齿轮精密冷锻件 结构设计规范 |
China National Standards gear |
English PDF |
| GB 19510.210-2013 |
Lamp controlgear―Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) 灯的控制装置 第2-10部分：高频冷启动管形放电灯（霓虹灯）用电子换流器和变频器的特殊要求 |
China National Standards gear |
English PDF |
| GB 7251.12-2013 |
Low-voltage switchgear and controlgear assemblies—Part 2: Power switchgear and controlgear assemblies 低压成套开关设备和控制设备 第2部分：成套电力开关和控制设备 |
China National Standards gear |
English PDF |
| GB 7251.1-2013 |
Low-voltage switchgear and controlgear assemblies―Part 1: General rules 低压成套开关设备和控制设备 第1部分:总则 |
China National Standards gear |
English PDF |
| GB/T 6809.3-2013 |
Reciprocating internal combustion engines―Vocabulary of components and systems―Part 3: Main running gear 往复式内燃机 零部件和系统术语 第3部分：主要运动件 |
China National Standards gear |
English PDF |
| GB/T 30104.210-2013 |
Digital addressable lighting interface―Part 210: Particular requirements for control gears―Sequencer (Device Type 9) 数字可寻址照明接口 第210部分：控制装置的特殊要求 程序装置（设备类型9） |
China National Standards gear |
English PDF |
| GB/T 30104.209-2013 |
Digital addressable lighting interface―Part 209: Particular requirements for control gear―Colour control (device type 8) 数字可寻址照明接口 第209部分：控制装置的特殊要求 颜色控制（设备类型8） |
China National Standards gear |
English PDF |
| GB/T 30104.208-2013 |
Digital addressable lighting interface―Part 208: Particular requirements for control gear―Switching function (device type 7) 数字可寻址照明接口 第208部分：控制装置的特殊要求 开关功能(设备类型7) |
China National Standards gear |
English PDF |
| GB/T 30104.207-2013 |
Digital addressable lighting interface―Part 207:Particular requirements for control gear―LED modules (device type 6) 数字可寻址照明接口 第207部分：控制装置的特殊要求 LED模块（设备类型6） |
China National Standards gear |
English PDF |
| GB/T 30104.206-2013 |
Digital addressable lighting interface―Part 206: Particular requirements for control gear―Conversion from digital signal into d. c. voltage (device type 5) 数字可寻址照明接口 第206部分：控制装置的特殊要求 数字信号转换成直流电压（设备类型5） |
China National Standards gear |
English PDF |
| GB/T 30104.205-2013 |
Digital addressable lighting interface―Part 205: Particular requirements for control gear―Supply voltage controller for incandescent lamps (device type 4) 数字可寻址照明接口 第205部分：控制装置的特殊要求 白炽灯电源电压控制器（设备类型4） |
China National Standards gear |
English PDF |
| GB/T 30104.204-2013 |
Digital addressable lighting interface―Part 204: Particular requirements for control gear―Low voltage halogen lamps (device type 3) 数字可寻址照明接口 第204部分：控制装置的特殊要求 低压卤钨灯(设备类型3) |
China National Standards gear |
English PDF |
| GB/T 30104.203-2013 |
Digital addressable lighting interface―Part 203: Particular requirements for control gear―Discharge lamps (excluding fluorescent lamps)(device type 2) 数字可寻址照明接口 第203部分：控制装置的特殊要求 放电灯（荧光灯除外）（设备类型2） |
China National Standards gear |
English PDF |
| GB/T 30104.202-2013 |
Digital addressable lighting interface―Part 202: Particular requirements for control gear―Self-contained emergency lighting (device type 1) 数字可寻址照明接口 第202部分：控制装置的特殊要求 自容式应急照明 (设备类型1) |
China National Standards gear |
English PDF |
| GB/T 30104.201-2013 |
Digital addressable lighting interface―Part 201: Particular requirements for control gear―Fluorescent lamps (device type 0) 数字可寻址照明接口 第201部分：控制装置的特殊要求 荧光灯(设备类型0) |
China National Standards gear |
English PDF |
| GB/T 30104.102-2013 |
Digital addressable lighting interface―Part 102: General requirments―Control gear 数字可寻址照明接口 第102部分：一般要求 控制装置 |
China National Standards gear |
English PDF |
| GB/T 14048.21-2013 |
Low-voltage switchgear and controlgear―Part 5-9: Control circuit devices and switching elements―Flow rate switches 低压开关设备和控制设备 第5-9部分：控制电路电器和开关元件 流量开关 |
China National Standards gear |
English PDF |
| GB/T 14048.20-2013 |
Low-voltage switchgear and controlgear―Part 5-8: Control circuit devices and switching elements―Three-position enabling switches 低压开关设备和控制设备 第5-8部分：控制电路电器和开关元件 三位使能开关 |
China National Standards gear |
English PDF |
| GB/T 14048.19-2013 |
Low-voltage switchgear and controlgear―Part 5-7: Control circuit devices and switching elements―Requirements for proximity devices with analogue output 低压开关设备和控制设备 第5-7部分：控制电路电器和开关元件 用于带模拟输出的接近设备的要求 |
China National Standards gear |
English PDF |
| GB/T 30034-2013 |
Criteria for changing of heavy-duty vechicle gear oil(GL-5) 重负荷车辆齿轮油（GL-5）换油指标 |
China National Standards gear |
English PDF |
| GB/T 29634-2013 |
General specification for permanent magnetic DC gearmotor using on electric wheelchairs 电动轮椅车用永磁直流齿轮减速电动机构通用技术条件 |
China National Standards gear |
English PDF |
| GB/T 29489-2013 |
lnductive load switching of high-voltage alternating current switchgear and controlgear 高压交流开关设备和控制设备的感性负载开合 |
China National Standards gear |
English PDF |
| GB 14048.1-2012 |
Low-voltage switchgear and controlgear - Part 1: General rules 低压开关设备和控制设备 第1部分：总则 |
China National Standards gear |
English PDF |
| GB/T 29127-2012 |
Measures for periodic servicing and maintenance of lifeboats and release gears 救生艇及吊钩释放系统定期检验维护方法 |
China National Standards gear |
English PDF |
| GB/T 29312-2012 |
Low-voltage reactive power compensation switchgear component 低压无功功率补偿投切装置 |
China National Standards gear |
English PDF |
| GB/T 28811-2012 |
High-voltage switchgear and controlgear - Digital interfaces based on IEC 61850 高压开关设备和控制设备 基于IEC 61850的数字接口 |
China National Standards gear |
English PDF |
| GB/T 28767-2012 |
Classification of automotive gear lubricants 车辆齿轮油分类 |
China National Standards gear |
English PDF |
| GB/T 17477-2012 |
Automotive gear lubricant viscosity classification 汽车齿轮润滑剂黏度分类 |
China National Standards gear |
English PDF |
| GB/Z 25842.2-2012 |
Low-voltage switchgear and controlgear - Over-current protective devices - Part 2: Selectivity under over-current conditions 低压开关设备和控制设备 过电流保护电器 第2部分：过电流条件下的选择性 |
China National Standards gear |
English PDF |
| GB/T 28819-2012 |
Aluminium alloy enclosures for gas-filled high-voltage switchgear 充气高压开关设备用铝合金外壳 |
China National Standards gear |
English PDF |
| GB/T 28810-2012 |
High-voltage switchgear and controlgear - The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear 高压开关设备和控制设备 电子及其相关技术在开关设备和控制设备的辅助设备中的应用 |
China National Standards gear |
English PDF |
| GB/T 18858.3-2012 |
Low-voltage switchgear and controlgear - Controller-device interface(CDIs) - Part 3: DeviceNet 低压开关设备和控制设备 控制器 设备接口(CDI) 第3部分：DeviceNet |
China National Standards gear |
English PDF |
| GB/T 18858.2-2012 |
Low-voltage switchgear and controlgear - Controller-device interfaces(CDIs) - Part 2: Actuator sensor interface(AS-i) 低压开关设备和控制设备 控制器 设备接口(CDI) 第2部分:执行器传感器接口(AS-i) |
China National Standards gear |
English PDF |
| GB/T 18858.1-2012 |
Low-voltage switchgear and controlgear - Controller-Device interfaces (CDIs) - Part 1: General rules 低压开关设备和控制设备 控制器 设备接口(CDI) 第1部分: 总则 |
China National Standards gear |
English PDF |
| GB/T 28674-2012 |
The technical specifications for remanufacturing of automotive components - Steering gear 汽车零部件再制造产品技术规范 转向器 |
China National Standards gear |
English PDF |
| GB 28525-2012 |
Compact switchgear assemblies for rated voltages of 72.5 kV and above 额定电压72.5 kV及以上紧凑型成套开关设备 |
China National Standards gear |
English PDF |
| GB/T 28537-2012 |
Use and handling of sulphur hexafluoride (SF6) in high-voltage switchgear and controlgear 高压开关设备和控制设备中六氟化硫（SF6）的使用和处理 |
China National Standards gear |
English PDF |
| GB/T 28534-2012 |
The health and environmental impact on release of sulphur hexafluoride （SF6） used in high-voltage switchgear and controlgear 高压开关设备和控制设备中六氟化硫（SF6）气体的释放对环境和健康的影响 |
China National Standards gear |
English PDF |
| GB/T 28428-2012 |
27.5kV and 2×27.5kV AC metal-enclosed switchgear and controlgear for electrification railway 电气化铁路27.5kV和2×27.5kV交流金属封闭开关设备和控制设备 |
China National Standards gear |
English PDF |
| GB/T 28252-2012 |
Hobs for pre-grinding gear 磨前齿轮滚刀 |
China National Standards gear |
English PDF |
| GB/T 28247-2012 |
Rotary gear milling cutters 盘形齿轮铣刀 |
China National Standards gear |
English PDF |
| GB/T 11022-2011 |
Common specifications for high-voltage switchgear and controlgear standards 高压开关设备和控制设备标准的共用技术要求 |
China National Standards gear |
English PDF |
| GB/T 3374.2-2011 |
Vocabulary of gear terms - Part 2: Definitions related to worm gear geometry 齿轮术语和定义 第2部分：蜗轮几何学定义 |
China National Standards gear |
English PDF |
| GB 5903-2011 |
gear oils for industrial enclosed gear system 工业闭式齿轮油 |
China National Standards gear |
English PDF |
| GB 2536-2011 |
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear 电工流体 变压器和开关用的未使用过的矿物绝缘油 |
China National Standards gear |
English PDF |
| GB/T 26777-2011 |
Semitrailer landing gears 挂车支撑装置 |
China National Standards gear |
English PDF |
| GB/T 6468-2010 |
The helix artifact of gear 齿轮螺旋线样板 |
China National Standards gear |
English PDF |
| GB/T 26093-2010 |
gear dual-flank meshing measuring instrument 齿轮双面啮合综合测量仪 |
China National Standards gear |
English PDF |
| GB/T 26092-2010 |
gear helix measuring instrument 齿轮螺旋线测量仪 |
China National Standards gear |
English PDF |
| GB/T 26091-2010 |
gear single-flank meshing integrated error measuring instrument 齿轮单面啮合整体误差测量仪 |
China National Standards gear |
English PDF |
| GB/T 26090-2010 |
gear circular pitch measuring instrument 齿轮齿距测量仪 |
China National Standards gear |
English PDF |
| GB/T 25890.9-2010 |
Railway applications - Fixed installations - DC switchgear Part 7-3: Measurement,control and protection devices for specific use in d.c. traction systems-Isolating voltage transducers and other voltage measuring devices 轨道交通 地面装置 直流开关设备 第7-3部分：直流牵引供电系统专用测量、控制和保护装置 隔离电压变送器和其他电压测量设备 |
China National Standards gear |
English PDF |
| GB/T 25890.8-2010 |
Railway applications - Fixed installations - DC switchgear Part 7-2: Measurement,control and protection devices for specific use in d.c. traction systems-Isolating current transducers and other current measuring devices 轨道交通 地面装置 直流开关设备 第7-2部分：直流牵引供电系统专用测量、控制和保护装置 隔离电流变送器和其他电流测量设备 |
China National Standards gear |
English PDF |
| GB/T 25890.7-2010 |
Railway applications - Fixed installations - DC switchgear - Part 7-1: Measurement,control and protection devices for specific use in d.c. traction systems-Application guide 轨道交通 地面装置 直流开关设备 第7-1部分：直流牵引供电系统专用测量、控制和保护装置 应用指南 |
China National Standards gear |
English PDF |
| GB/T 25890.6-2010 |
Railway applications - Fixed installations - DC switchgear - Part 6: DC switchgear assemblies 轨道交通 地面装置 直流开关设备 第6部分：直流成套开关设备 |
China National Standards gear |
English PDF |
| GB/T 25890.5-2010 |
Railway applications - Fixed installations - DC switchgear - Part 5: Surge arresters and low-voltage limiters for specific use in d.c. system 轨道交通 地面装置 直流开关设备 第5部分：直流避雷器和低压限制器 |
China National Standards gear |
English PDF |
| GB/T 25890.4-2010 |
Railway applications - Fixed installations - DC switchgear - Part 4: Outdoor d.c. disconnectors, switch-disconnectors and earthing switches 轨道交通 地面装置 直流开关设备 第4部分：户外直流隔离开关、负荷开关和接地开关 |
China National Standards gear |
English PDF |
| GB/T 25890.3-2010 |
Railway applications - Fixed installations - DC switchgear - Part 3: Indoor d.c. disconnectors, switch disconnectors and earthing switches 轨道交通 地面装置 直流开关设备 第3部分：户内直流隔离开关、负荷开关和接地开关 |
China National Standards gear |
English PDF |
| GB/T 25890.2-2010 |
Railway applications - Fixed installations - DC switchgear - Part 2: DC circuit breakers 轨道交通 地面装置 直流开关设备 第2部分：直流断路器 |
China National Standards gear |
English PDF |
| GB/T 25890.1-2010 |
Railway applications - Fixed installations - DC switchgear - Part 1：General 轨道交通 地面装置 直流开关设备 第1部分：总则 |
China National Standards gear |
English PDF |
| GB/T 25662-2010 |
Numerical control spiral bevel gear milling machines - Testing of the accuracy 数控弧齿锥齿轮铣齿机 精度检验 |
China National Standards gear |
English PDF |
| GB/Z 25842.1-2010 |
Low-voltage switchgear and controlgear - Overcurrent protective devices - Part 1: Application of short-circuit ratings 低压开关设备和控制设备 过电流保护电器 第1部分：短路定额的应用 |
China National Standards gear |
English PDF |
| GB/T 25509-2010 |
Mechanical systems and components for general use - Reference dictionary for gears 机械系统和通用件 齿轮参考字典 |
China National Standards gear |
English PDF |
| GB 14048.4-2010 |
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Including motor protector) 低压开关设备和控制设备 第4-1部分：接触器和电动机起动器 机电式接触器和电动机起动器（含电动机保护器） |
China National Standards gear |
English PDF |
| Find out:367Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
