Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 46043-2025 |
Plastics - Recycled plastics - Guidelines for traceability and environmental assessment {译} 塑料-再生塑料-可追溯性和环境因素评估指南 |
China National Standards last |
 English PDF |
| GB/T 46020.2-2025 |
Plastics - Guidelines for Recyclable Design - Part 2: High-Density Polyethylene (PE-HD) Materials {译} 塑料-可回收再生设计指南-第2部分：高密度聚乙烯（PE-HD）材料 |
China National Standards last |
English PDF |
| GB/T 46020.1-2025 |
Plastics - Guidelines for Recyclable Design - Part 1: Polyethylene Terephthalate (PET) Materials {译} 塑料-可回收再生设计指南-第1部分：聚对苯二甲酸乙二醇酯（PET）材料 |
China National Standards last |
English PDF |
| GB/T 46019.2-2025 |
Plastics - Identification of Recycled Plastic Components - Part 2: Polypropylene (PP) Materials {译} 塑料-再生塑料成分鉴别-第2部分：聚丙烯（PP）材料 |
China National Standards last |
English PDF |
| GB/T 46019.1-2025 |
Plastics - Identification of Recycled Plastic Components - Part 1: Polyethylene Terephthalate (PET) Materials {译} 塑料-再生塑料成分鉴别-第1部分：聚对苯二甲酸乙二醇酯（PET）材料 |
China National Standards last |
English PDF |
| GB/T 46018.2-2025 |
Plastics - Technical Specifications for Evaluation of Recycled Plastic Products - Part 2: Polystyrene (PS) Materials {译} 塑料-再生塑料产品评价技术规范-第2部分：聚苯乙烯（PS）材料 |
China National Standards last |
English PDF |
| GB/T 46018.1-2025 |
Plastics - Technical Specifications for Evaluation of Recycled Plastic Products - Part 1: Polyethylene Terephthalate (PET) Materials {译} 塑料-再生塑料产品评价技术规范-第1部分：聚对苯二甲酸乙二醇酯（PET）材料 |
China National Standards last |
English PDF |
| GB/T 45159.6-2025 |
Mechanical Vibration and Shock - Characterization of Dynamic Mechanical Properties of Viscoelastic Materials - Part 6: Time-Temperature Superposition {译} 机械振动与冲击-黏弹性材料动态力学性能的表征-第6部分：时温叠加 |
China National Standards last |
English PDF |
| GB/T 45159.5-2025 |
Mechanical Vibration and Shock - Characterization of Dynamic Mechanical Properties of Viscoelastic Materials - Part 5: Poisson's Ratio Based on Comparison of Measurement and Finite Element Analysis {译} 机械振动与冲击-黏弹性材料动态力学性能的表征-第5部分：基于测量和有限元分析比较的泊松比 |
China National Standards last |
English PDF |
| GB/T 45159.4-2025 |
Mechanical Vibration and Shock - Characterization of Dynamic Mechanical Properties of Viscoelastic Materials - Part 4: Dynamic Stiffness Method {译} 机械振动与冲击-黏弹性材料动态力学性能的表征-第4部分：动刚度法 |
China National Standards last |
English PDF |
| GB/T 41762.1-2025 |
Fiber-reinforced plastic composites - Determination of through-thickness properties of laminates - Part 1: Direct tension and compression tests {译} 纤维增强塑料复合材料-层合板厚度方向性能的测定-第1部分：直接拉伸和压缩试验 |
China National Standards last |
English PDF |
| GB/T 40006.13-2025 |
Plastics - Recycled plastics - Part 13: Polyphenylene ether (PPE) {译} 塑料-再生塑料-第13部分：聚苯醚（PPE）材料 |
China National Standards last |
English PDF |
| GB/T 40006.4-2025 |
Plastics - Recycled plastics - Part 4: Polyolefin blends (MPO) {译} 塑料-再生塑料-第4部分：聚烯烃混合物(MPO)材料 |
China National Standards last |
English PDF |
| GB/T 22040-2025 |
Weathering Resistance Requirements and Test Methods for Plastic Products Along Highway Facilities {译} 公路沿线设施塑料制品耐候性要求及测试方法 |
China National Standards last |
English PDF |
| GB/T 15234-2025 |
Plastic flat pallets {译} 塑料平托盘 |
China National Standards last |
English PDF |
| GB/T 14447-2025 |
Test Methods for the Electrostatic Properties of Plastic Films - Half-Life Method {译} 塑料薄膜静电性测试方法-半衰期法 |
China National Standards last |
English PDF |
| GB 46035-2025 |
Rubber and Plastics Machinery - General Safety Requirements {译} 橡胶塑料机械-通用安全要求 |
China National Standards last |
English PDF |
| GB/T 8237-2025 |
Liquid Unsaturated Polyester Resins for Fiber-Reinforced Plastics {译} 纤维增强塑料用液体不饱和聚酯树脂 |
China National Standards last |
English PDF |
| GB/T 5027-2025 |
Metallic Materials - Sheets and Strips - Determination of Plastic Strain Ratio (r-Value) {译} 金属材料-薄板和薄带-塑性应变比（r值）的测定 |
China National Standards last |
English PDF |
| GB/T 14654-2025 |
Elastic Damping Spring Vibration Isolator {译} 弹性阻尼簧片减振器 |
China National Standards last |
English PDF |
| GB/T 12922-2025 |
Elastic Damping Spring Coupling {译} 弹性阻尼簧片联轴器 |
China National Standards last |
English PDF |
| GB/T 24204-2025 |
Iron Ore for Blast Furnace Charges - Determination of Pulverization Rate During Low-Temperature Reduction - Dynamic Test Method {译} 高炉炉料用铁矿石-低温还原粉化率的测定-动态试验法 |
China National Standards last |
English PDF |
| GB/T 45694-2025 |
Test methods for natural fiber reinforced plastic composite (NFC) panels {译} 天然纤维增强塑料复合（NFC）板试验方法 |
China National Standards last |
English PDF |
| GB/T 18501.8100-2025 |
Connectors for Electronic and Electrical Equipment - Product Requirements - Part 8-100: Power Connectors - Detail Specification for 2-Pin and 3-Pin 20-A Power Plus 2-Pin Signal Connectors, Plastic Housing, Shielded and Sealed {译} 电子和电气设备用连接器-产品要求-第8-100部分：电源连接器-2芯、3芯20-A功率加2芯信号塑料外壳屏蔽密封连接器详细规范 |
China National Standards last |
English PDF |
| GB/T 18501.8101-2025 |
Connectors for Electronic and Electrical Equipment - Product Requirements - Part 8-101: Power Connectors - Detail Specification for 2-Pin and 3-Pin 40-A Power Plus 2-Pin Signal Connectors, Plastic Housing, Shielded and Sealed {译} 电子和电气设备用连接器-产品要求-第8-101部分：电源连接器-2芯、3芯40-A功率加2芯信号塑料外壳屏蔽密封连接器详细规范 |
China National Standards last |
English PDF |
| GB/T 45644-2025 |
Test Method for Resistance of Thermoplastic Manholes to Ground and Traffic Loads {译} 热塑性塑料检查井抗地面和交通负荷性能试验方法 |
China National Standards last |
English PDF |
| GB/T 45598-2025 |
Fine Ceramics - High-Temperature Elasticity Test Methods for Elastomer Modulus, Shear Modulus, and Poisson's Ratio - Pulse Excitation Method {译} 精细陶瓷-高温弹性模量、剪切模量和泊松比试验方法-脉冲激励法 |
China National Standards last |
English PDF |
| GB/T 43852-2024 |
Steel-reinforced Plastic Composite Pressure Pipes for Hot and Cold Water {译} 冷热水用钢增强塑料复合压力管 |
China National Standards last |
English PDF |
| GB/T 17263-2025 |
Self-ballasted Fluorescent Lamps for General Lighting - Performance Specifications {译} 普通照明用自镇流荧光灯-性能规范 |
China National Standards last |
English PDF |
| GB/T 45441-2025 |
Greenhouse Gases - Production Product Carbon Footprint Quantification Method and Requirements - Plastic Products {译} 温室气体-产品碳足迹量化方法与要求-塑料制品 |
China National Standards last |
English PDF |
| GB/T 45357-2025 |
Plastic Piping Systems for Marine Use - Polyethylene (PE) Pipes and Fittings {译} 船用塑料管道系统-聚乙烯（PE）管材及管件 |
China National Standards last |
English PDF |
| GB/T 45336-2025 |
Plastics - Determination of Tensile Properties of Thermoplastics in the Molten State {译} 塑料-熔融状态下热塑性塑料拉伸性能的测定 |
China National Standards last |
English PDF |
| GB 30185-2025 |
Energy Consumption Limits per Unit for Aluminum (Plastic) Composite Panels {译} 铝（塑）复合板单位产品能源消耗限额 |
China National Standards last |
English PDF |
| GB/T 1634.1-2025 |
Plastics - Determination of deflection temperature under load - Part 1: General test method {译} 塑料-负荷变形温度的测定-第1部分：通用试验方法 |
China National Standards last |
English PDF |
| GB/T 18964.1-2025 |
Plastics - High-Performance Polystyrene (PS-I) Molding and Extrusion Materials - Part 1: Nomenclature System and Basis of Classification {译} 塑料-抗冲击聚苯乙烯（PS-I）模塑和挤出材料-第1部分：命名系统和分类基础 |
China National Standards last |
English PDF |
| GB/T 18964.2-2025 |
Plastics - High-Performance Polystyrene (PS-I) Molding and Extrusion Materials - Part 2: Specimen Preparation and Property Determination {译} 塑料-抗冲击聚苯乙烯（PS-I）模塑和挤出材料-第2部分：试样制备和性能测定 |
China National Standards last |
English PDF |
| GB/T 36800.3-2025 |
Plastics - Thermomechanical Analysis (TMA) - Part 3: Determination of Needle Penetration Temperature {译} 塑料-热机械分析法（TMA）-第3部分：针入温度的测定 |
China National Standards last |
English PDF |
| GB/T 43982.11-2025 |
Plastic Piping Systems for Trenchless Rehabilitation of Underground Water Supply Networks - Part 11: Hose Insertion and Lining Method {译} 地下供水管网非开挖修复用塑料管道系统-第11部分：软管穿插内衬法 |
China National Standards last |
English PDF |
| GB/T 45127-2025 |
Plastics - Evaluation of Microbial Activity {译} 塑料-微生物作用的评价 |
China National Standards last |
English PDF |
| GB/T 45128-2025 |
Plastics - Determination of Moisture Content {译} 塑料-含水量的测定 |
China National Standards last |
English PDF |
| GB/T 45183-2025 |
Plastics - Instrumental Determination of Irradiation in Weathering Tests - General Principles and Basic Test Methods {译} 塑料-气候老化试验中辐照量的仪器测定-总则和基本测试方法 |
China National Standards last |
English PDF |
| GB/T 6594.1-2025 |
Plastics - Polystyrene (PS) Molding and Extrusion Materials - Part 1: Nomenclature System and Basis of Classification {译} 塑料-聚苯乙烯（PS）模塑和挤出材料-第1部分：命名系统和分类基础 |
China National Standards last |
English PDF |
| GB/T 6594.2-2025 |
Plastics - Polystyrene (PS) Molding and Extrusion Materials - Part 2: Specimen Preparation and Properties Determination {译} 塑料-聚苯乙烯（PS）模塑和挤出材料-第2部分：试样制备和性能测定 |
China National Standards last |
English PDF |
| GB/T 6595-2025 |
Plastics - Fisheye Test Method for Polypropylene Resin {译} 塑料-聚丙烯树脂鱼眼测试方法 |
China National Standards last |
English PDF |
| GB/T 45135-2024 |
Superplastic forming and diffusion bonding of titanium alloy sheets-General technical specifications {译} 钛合金板材超塑成形和扩散连接件-通用技术规范 |
China National Standards last |
English PDF |
| GB/T 1632.1-2024 |
Plastics - Determination of viscosity of dilute polymer solutions using a capillary viscometer - Part 1: General {译} 塑料-使用毛细管黏度计测定聚合物稀溶液黏度-第1部分：通则 |
China National Standards last |
English PDF |
| GB/T 25936.4-2024 |
Rubber and plastic crushing machinery - Part 4: Safety requirements for pelletizers {译} 橡胶塑料粉碎机械-第4部分:团粒机安全要求 |
China National Standards last |
English PDF |
| GB/T 45159.3-2024 |
Mechanical vibration and shock - Characterization of dynamic mechanical properties of viscoelastic materials - Part 3: Cantilever shear beam method {译} 机械振动与冲击-黏弹性材料动态力学性能的表征-第3部分：悬臂剪切梁法 |
China National Standards last |
English PDF |
| GB/T 45159.2-2024 |
Mechanical vibration and shock - Characterization of dynamic mechanical properties of viscoelastic materials - Part 2: Resonance method {译} 机械振动与冲击-黏弹性材料动态力学性能的表征-第2部分：共振法 |
China National Standards last |
English PDF |
| GB/T 45159.1-2024 |
Mechanical vibration and shock - Characterization of dynamic mechanical properties of viscoelastic materials - Part 1: Principles and guidelines {译} 机械振动与冲击-黏弹性材料动态力学性能的表征-第1部分：原理和指南 |
China National Standards last |
English PDF |
| GB/T 45171-2024 |
Determination of the temperature of the contact surface of plastic food contact materials and products with food under microwave heating conditions {译} 塑料类食品接触材料及制品在微波加热条件下与食品接触面温度的测定 |
China National Standards last |
English PDF |
| GB/T 45091-2024 |
Plastics-Limit requirements for restricted substances in recycled plastics {译} 塑料-再生塑料限用物质限量要求 |
China National Standards last |
English PDF |
| GB/T 45090-2024 |
Plastics-Marking and marking of recycled plastics {译} 塑料-再生塑料的标识和标志 |
China National Standards last |
English PDF |
| GB/T 44995-2024 |
Polypropylene packaging containers-Guidelines for the construction of preliminary screening test methods for adulterated recycled plastics {译} 聚丙烯包装容器-掺杂回收塑料初筛测试方法构建指南 |
China National Standards last |
English PDF |
| GB/T 43133.2-2024 |
Transport packaging - reusable plastic turnover boxes - Part 2: General test specifications {译} 运输包装-可重复使用的塑料周转箱-第2部分：试验通用规范 |
China National Standards last |
English PDF |
| GB/T 44846-2024 |
Calculation of the load-bearing capacity of plastic gears {译} 塑料齿轮承载能力计算 |
China National Standards last |
English PDF |
| GB/T 44825-2024 |
Test method for determination of total fluorine content in bio-based materials and degradable plastics {译} 生物基材料与降解塑料中总氟含量测定试验方法 |
China National Standards last |
English PDF |
| GB/T 14663-2024 |
Plastic packaging molds - Technical specifications {译} 塑料封装模-技术规范 |
China National Standards last |
English PDF |
| GB/T 44468-2024 |
Intuitive and qualitative analysis methods for plastic degradation rate under artificial simulated marine environmental conditions {译} 人工模拟海洋环境条件下塑料降解速率直观和定性分析方法 |
China National Standards last |
English PDF |
| GB/T 44540-2024 |
Fine ceramics - Determination of elastic modulus and bending strength of ceramic tubes or rings - Notched ring method {译} 精细陶瓷-陶瓷管材或环材弹性模量和弯曲强度的测定-缺口环法 |
China National Standards last |
English PDF |
| GB/T 19274-2024 |
Geosynthetics - Plastic geocells {译} 土工合成材料-塑料土工格室 |
China National Standards last |
English PDF |
| GB/T 44570-2024 |
Plastic products - Polycarbonate sheets {译} 塑料制品-聚碳酸酯板材 |
China National Standards last |
English PDF |
| GB/T 40006.11-2024 |
Plastics - Recycled plastics - Part 11: Polyvinyl chloride (PVC) materials {译} 塑料-再生塑料-第11部分：聚氯乙烯（PVC）材料 |
China National Standards last |
English PDF |
| GB/T 44580-2024 |
Thermoplastic valves-Fatigue strength-Test methods {译} 热塑性塑料阀门-疲劳强度-试验方法 |
China National Standards last |
English PDF |
| GB/T 44576-2024 |
Thermoplastic valves-Torque-Test methods {译} 热塑性塑料阀门-扭矩-试验方法 |
China National Standards last |
English PDF |
| GB/T 44578-2024 |
Thermoplastic diaphragm valves {译} 热塑性塑料隔膜阀 |
China National Standards last |
English PDF |
| GB/T 44579-2024 |
Thermoplastic manifolds {译} 热塑性塑料分集水器 |
China National Standards last |
English PDF |
| GB/T 7948-2024 |
Sliding bearings - Limit PV test method for plastic bushings {译} 滑动轴承-塑料轴套极限PV试验方法 |
China National Standards last |
English PDF |
| GB/T 16288-2024 |
Marking of plastic products {译} 塑料制品的标志 |
China National Standards last |
English PDF |
| GB/T 3074.2-2024 |
Determination method for elastic modulus of carbon materials {译} 炭素材料弹性模量测定方法 |
China National Standards last |
English PDF |
| GB/T 44574-2024 |
Plastic check valves for pollution prevention of building drainage pipe systems {译} 建筑排水管道系统防污染用塑料止回阀 |
China National Standards last |
English PDF |
| GB/T 44535-2024 |
Plastics-Determination of linear dimensions of specimens {译} 塑料-试样线性尺寸的测定 |
China National Standards last |
English PDF |
| GB/T 44559.1-2024 |
Plastics - Determination of punching performance of rigid plastics - Part 1: Non-instrumented impact test {译} 塑料-硬质塑料冲孔性能的测定-第1部分：非仪器化冲击试验 |
China National Standards last |
English PDF |
| GB/T 44308-2024 |
Determination of component content and pore content of carbon fiber and glass fiber composite reinforced plastics {译} 碳纤维和玻璃纤维组合增强塑料组分含量和孔隙含量的测定 |
China National Standards last |
English PDF |
| GB/T 44307-2024 |
Carbon fiber reinforced plastics - Determination of fiber mass content - Thermogravimetric analysis (TG) {译} 碳纤维增强塑料-纤维质量含量的测定-热重分析法（TG） |
China National Standards last |
English PDF |
| GB/T 44302-2024 |
Carbon fiber reinforced plastic and metal assemblies - Determination of tensile lap shear strength {译} 碳纤维增强塑料和金属组合件-拉伸搭接剪切强度的测定 |
China National Standards last |
English PDF |
| GB/T 44305.2-2024 |
Plastics-Plasticized polyvinyl chloride (PVC-P) molding and extrusion materials-Part 2: Preparation of specimens and determination of properties {译} 塑料-增塑聚氯乙烯（PVC-P）模塑和挤塑材料-第2部分:试样制备和性能测定 |
China National Standards last |
English PDF |
| GB/T 44305.1-2024 |
Plastics-Plasticized polyvinyl chloride (PVC-P) molding and extrusion materials-Part 1: Nomenclature system and basis for specifications {译} 塑料-增塑聚氯乙烯（PVC-P）模塑和挤塑材料-第1部分：命名系统及规范基础 |
China National Standards last |
English PDF |
| GB/T 44439-2024 |
Plastic pipes and fittings - Automatic identification system for electric fusion welding {译} 塑料管材和管件-电熔熔接自动识别系统 |
China National Standards last |
English PDF |
| GB/T 44303-2024 |
Plastics - Quantitative evaluation of scratch damage and scratch visibility {译} 塑料-划痕损伤和划痕可见性的定量评估 |
China National Standards last |
English PDF |
| GB/T 25936.3-2024 |
Rubber and plastic crushing machinery-Part 3: Safety requirements for shredders {译} 橡胶塑料粉碎机械-第3-部分：切碎机安全要求 |
China National Standards last |
English PDF |
| GB/T 25936.2-2024 |
Rubber and plastic crushing machinery-Part 2: Safety requirements for strand pelletizers {译} 橡胶塑料粉碎机械-第2部分：拉条式切粒机安全要求 |
China National Standards last |
English PDF |
| GB/T 25936.1-2024 |
Rubber and plastic crushing machinery-Part 1: Safety requirements for blade crushers {译} 橡胶塑料粉碎机械-第1部分：刀片式破碎机安全要求 |
China National Standards last |
English PDF |
| GB/T 44317-2024 |
Thermoplastic lined oil pipes {译} 热塑性塑料内衬油管 |
China National Standards last |
English PDF |
| GB/T 4732.5-2024 |
Analysis and design of pressure vessels - Part 5: Elastic-plastic analysis method {译} 压力容器分析设计-第5部分：弹塑性分析方法 |
China National Standards last |
English PDF |
| GB/T 35612-2024 |
Green product evaluation-wood plastic products {译} 绿色产品评价-木塑制品 |
China National Standards last |
English PDF |
| GB/T 15597.2-2024 |
Plastics - Polymethyl methacrylate (PMMA) - Molding and extrusion materials - Part 2: Preparation of specimens and performance determination {译} 塑料-聚甲基丙烯酸甲酯（PMMA）-模塑和挤出材料-第2部分：试样制备和性能测定 |
China National Standards last |
English PDF |
| GB/T 15597.1-2024 |
Plastics - Polymethyl methacrylate (PMMA) molding and extrusion materials - Part 1: Nomenclature system and classification basis {译} 塑料-聚甲基丙烯酸甲酯（PMMA）模塑和挤出材料-第1部分：命名系统和分类基础 |
China National Standards last |
English PDF |
| GB/T 24189-2024 |
Iron ore for blast furnaces - Determination of reducibility expressed as the final reduction index {译} 高炉用铁矿石-用最终还原度指数表示的还原性的测定 |
China National Standards last |
English PDF |
| GB/T 41666.7-2024 |
Plastic pipe systems for trenchless repair of underground non-pressure drainage networks - Part 7: Spiral winding lining method {译} 地下无压排水管网非开挖修复用塑料管道系统-第7部分：螺旋缠绕内衬法 |
China National Standards last |
English PDF |
| GB/T 43982.1-2024 |
Plastic pipe systems for trenchless repair of underground water supply networks - Part 1: General {译} 地下供水管网非开挖修复用塑料管道系统-第1部分：总则 |
China National Standards last |
English PDF |
| GB/T 30102-2024 |
Guide to the recycling and reuse of plastic waste {译} 塑料废弃物的回收和再利用指南 |
China National Standards last |
English PDF |
| GB/T 27692-2024 |
Iron pellets for blast furnaces {译} 高炉用铁球团矿 |
China National Standards last |
English PDF |
| GB/T 33488.5-2024 |
Inspection methods for plastic welded pressure-bearing equipment for chemical industry-Part 5: Ultrasonic testing by time-of-flight diffraction {译} 化工用塑料焊接制承压设备检验方法-第5部分：衍射时差法超声检测 |
China National Standards last |
English PDF |
| GB/T 43852-2024 |
Steel reinforced plastic composite pressure pipe for hot and cold water {译} 冷热水用钢增强塑料复合压力管 |
China National Standards last |
English PDF |
| GB/T 18916.13-2024 |
Ship ballast water treatment system-Part 2: Electrolysis method {译} 工业用水定额-第13部分：乙烯和丙烯 |
China National Standards last |
English PDF |
| GB/T 43664.1-2024 |
Plastic pipe systems for trenchless repair of underground non-pressure drainage networks-Part-4: In-situ curing lining method {译} 水处理剂分散性能测定方法-第1部分：分散高岭土法 |
China National Standards last |
English PDF |
| GB/T 19923-2024 |
Plastic water-saving irrigation equipment-Part 7: Plastic valves for micro-irrigation {译} 城市污水再生利用-工业用水水质 |
China National Standards last |
English PDF |
| GB/T 4937.35-2024 |
Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopy of plastic encapsulated electronic components {译} 半导体器件-机械和气候试验方法-第35部分：塑封电子元器件的声学显微镜检查 |
China National Standards last |
English PDF |
| GB/T 43330.4-2023 |
Ship's ballast water treatment systems Part 4: Discharge sampling devices and procedures {译} 船舶压载水处理系统 第4部分：排放取样装置和规程 |
China National Standards last |
English PDF |
| GB/T 31308.4-2023 |
Data elements, processes and documents in administration, commerce and industry Long-lasting signatures Part 4: Attestation object attributes for long-lasting signature formats {译} 行政、商业和行业中的数据元、过程和文档 长效签名 第4部分：用于长效签名格式的存证对象属性 |
China National Standards last |
English PDF |
| GB/T 31308.3-2023 |
Data elements, processes and documents in administration, commerce and industry Long-lasting signatures Part 3: Long-lasting signature specifications for PDF Advanced Electronic Signatures (PAdES) {译} 行政、商业和行业中的数据元、过程和文档 长效签名 第3部分: PDF高级电子签名（PAdES）的长效签名规范 |
China National Standards last |
English PDF |
| GB/T 30422-2023 |
Electrodeless fluorescent lamps (other than self-ballasted lamps) Safety regulations {译} 无极荧光灯（自镇流灯除外） 安全规范 |
China National Standards last |
English PDF |
| GB/T 28886-2023 |
Plastic doors and windows for construction {译} 建筑用塑料门窗 |
China National Standards last |
English PDF |
| GB/T 24906-2023 |
Safety regulations for self-ballasted LED lamps above 50V for general lighting {译} 普通照明用50V以上自镇流LED灯 安全规范 |
China National Standards last |
English PDF |
| GB/T 19510.212-2023 |
Light source control devices Part 2-12: Special requirements for DC or AC electronic ballasts for discharge lamps (other than fluorescent lamps) {译} 光源控制装置 第2-12部分：放电灯（荧光灯除外）用直流或交流电子镇流器的特殊要求 |
China National Standards last |
English PDF |
| GB/T 19510.208-2023 |
Light source control devices Part 2-8: Special requirements for ballasts for fluorescent lamps {译} 光源控制装置 第2-8部分：荧光灯用镇流器的特殊要求 |
China National Standards last |
English PDF |
| GB/T 16844-2023 |
Safety regulations for self-ballasted fluorescent lamps for general lighting {译} 普通照明用自镇流荧光灯 安全规范 |
China National Standards last |
English PDF |
| GB/T 6803-2023 |
Drop weight test method for non-plastic transition temperature of ferritic steels {译} 铁素体钢的无塑性转变温度落锤试验方法 |
China National Standards last |
English PDF |
| GB/T 1677-2023 |
Determination of epoxy value of plasticizer {译} 增塑剂环氧值的测定 |
China National Standards last |
English PDF |
| GB/T 43289-2023 |
Plastics. Test method for determining the rate of decomposition and extent of disintegration of plastic materials in matrices exposed to the marine environment under laboratory conditions. {译} 塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法 |
China National Standards last |
English PDF |
| GB/T 43288-2023 |
Plastics. Soil biodegradable materials for agricultural and horticultural mulch films. Requirements and test methods for biodegradability, ecotoxicity and composition control. {译} 塑料 农业和园艺地膜用土壤生物降解材料 生物降解性能、生态毒性和成分控制的要求和试验方法 |
China National Standards last |
English PDF |
| GB/T 43287-2023 |
Plastics Determination of the degree of disintegration of plastic materials in the marine environment under actual field conditions {译} 塑料 在实际野外条件海洋环境中塑料材料崩解度的测定 |
China National Standards last |
English PDF |
| GB/T 43282.2-2023 |
Plastics. Determination of aerobic biodegradation of plastic materials exposed to seawater. Part 2: Method for determination of oxygen demand in a closed respirometer. {译} 塑料 暴露于海水中塑料材料需氧生物分解的测定 第2部分：采用测定密闭呼吸计内需氧量的方法 |
China National Standards last |
English PDF |
| GB/T 43282.1-2023 |
Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1: Using methods to analyze the release of carbon dioxide. {译} 塑料 暴露于海水中塑料材料需氧生物分解的测定 第1部分：采用分析释放二氧化碳的方法 |
China National Standards last |
English PDF |
| GB/T 29165.4-2023 |
Oil and gas industry Glass fiber reinforced plastic pipes Part 4: Assembly, installation and operation {译} 石油天然气工业 玻璃纤维增强塑料管 第4部分：装配、安装与运行 |
China National Standards last |
English PDF |
| GB/T 29165.3-2023 |
Oil and gas industry Glass fiber reinforced plastic pipes Part 3: System design {译} 石油天然气工业 玻璃纤维增强塑料管 第3部分：系统设计 |
China National Standards last |
English PDF |
| GB/T 43275-2023 |
Screening and determination of antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium in toy plastics by energy dispersive X-ray fluorescence spectrometry {译} 玩具塑料中锑、砷、钡、镉、铬、铅、汞、硒元素的筛选测定 能量色散X射线荧光光谱法 |
China National Standards last |
English PDF |
| GB/T 43308-2023 |
Glass fiber reinforced thermoplastic unidirectional prepreg {译} 玻璃纤维增强热塑性单向预浸料 |
China National Standards last |
English PDF |
| GB/T 43354-2023 |
Plane bending fatigue test method for copper alloy elastic strips {译} 铜合金弹性带材平面弯曲疲劳试验方法 |
China National Standards last |
English PDF |
| GB/T 29419-2023 |
Performance of wood plastic composite decking, guardrails and fencing systems {译} 塑木复合材料铺板、护栏和围栏体系性能 |
China National Standards last |
English PDF |
| GB/T 29418-2023 |
Test method for performance of wood-plastic composite extruded profiles {译} 塑木复合材料挤出型材性能测试方法 |
China National Standards last |
English PDF |
| GB/T 30163-2023 |
Technical Specifications for Energy Saving of High Air Temperature Top-Fired Hot Air Stoves for Blast Furnaces {译} 高炉用高风温顶燃式热风炉节能技术规范 |
China National Standards last |
English PDF |
| GB/T 41312.3-2023 |
Permeability testing methods for equipment used in chemical industry Part 3: Plastics and their lining equipment {译} 化工用设备渗透性检测方法 第3部分：塑料及其衬里设备 |
China National Standards last |
English PDF |
| GB/T 41312.2-2023 |
Permeability testing methods for chemical industry equipment Part 2: Fiber reinforced thermosetting plastic equipment {译} 化工用设备渗透性检测方法 第2部分：纤维增强热固性塑料设备 |
China National Standards last |
English PDF |
| GB/T 43330.1-2023 |
Ship ballast water treatment systems Part 1: Requirements {译} 船舶压载水处理系统 第1部分：要求 |
China National Standards last |
English PDF |
| GB/T 43413-2023 |
Non-destructive testing Infrared thermal imaging testing General rules for thermoelastic stress measurement methods {译} 无损检测 红外热成像检测 热弹性应力测量方法通则 |
China National Standards last |
English PDF |
| GB/T 13871.4-2023 |
Rotating shaft lip seals with elastomer sealing elements - Part 4: Performance test procedures {译} 密封元件为弹性体材料的旋转轴唇形密封圈 第4部分：性能试验程序 |
China National Standards last |
English PDF |
| GB/T 13871.3-2023 |
Lip seals for rotating shafts with elastomeric sealing elements - Part 3: Storage, handling and installation {译} 密封元件为弹性体材料的旋转轴唇形密封圈 第3部分：贮存、搬运和安装 |
China National Standards last |
English PDF |
| GB/T 3510-2023 |
Determination of plasticity of unvulcanized rubber - Rapid plastometer method {译} 未硫化橡胶 塑性的测定 快速塑性计法 |
China National Standards last |
English PDF |
| GB/T 43355-2023 |
Determination of antiviral activity on surfaces of plastics and other non-porous materials {译} 塑料和其他无孔材料表面抗病毒活性的测定 |
China National Standards last |
English PDF |
| GB/T 43316.6-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 6: Slow strain rate method {译} 塑料 耐环境应力开裂(ESC)的测定 第6部分:慢应变速率法 |
China National Standards last |
English PDF |
| GB/T 43316.5-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 5: Constant tensile deformation method {译} 塑料 耐环境应力开裂(ESC)的测定 第5部分:恒定拉伸变形法 |
China National Standards last |
English PDF |
| GB/T 43316.4-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 4: Ball or pin pressure method {译} 塑料 耐环境应力开裂(ESC)的测定 第4部分:球压或针压法 |
China National Standards last |
English PDF |
| GB/T 43316.3-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 3: Bending method {译} 塑料 耐环境应力开裂(ESC)的测定 第3部分:弯曲法 |
China National Standards last |
English PDF |
| GB/T 43316.2-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 2: Constant tensile load method {译} 塑料 耐环境应力开裂(ESC)的测定 第2部分:恒定拉伸负荷法 |
China National Standards last |
English PDF |
| GB/T 43316.1-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 1: General principles {译} 塑料 耐环境应力开裂(ESC)的测定 第1部分:通则 |
China National Standards last |
English PDF |
| GB/T 43297-2023 |
Plastics—Methods for evaluating photoaging properties of polymers—Fourier transform infrared spectroscopy and UV/visible spectroscopy {译} 塑料 聚合物光老化性能评估方法 傅里叶红外光谱和紫外/可见光谱法 |
China National Standards last |
English PDF |
| GB/T 42918.2-2023 |
Plastics - Thermoplastic polyurethanes for molding and extrusion - Part 2: Specimen preparation and property determination {译} 塑料 模塑和挤出用热塑性聚氨酯 第2部分：试样制备和性能测定 |
China National Standards last |
English PDF |
| GB/T 31402-2023 |
Determination of antimicrobial activity on surfaces of plastics and other non-porous materials {译} 塑料和其他无孔材料表面抗菌活性的测定 |
China National Standards last |
English PDF |
| GB/T 21461.2-2023 |
Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 2: Specimen preparation and property determination {译} 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards last |
English PDF |
| GB/T 21461.1-2023 |
Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 1: Nomenclature system and basis for classification {译} 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards last |
English PDF |
| GB 4806.7-2023 |
National Food Safety Standards Plastic Materials and Products for Food Contact {译} 食品安全国家标准 食品接触用塑料材料及制品 |
China National Standards last |
English PDF |
| GB/T 43133.1-2023 |
Transport packaging Reusable plastic turnover boxes Part 1: General requirements {译} 运输包装 可重复使用的塑料周转箱 第1部分：通用要求 |
China National Standards last |
English PDF |
| GB/T 43128-2023 |
General technical specifications for aerospace thermoplastic polyurethane elastomer interlayer films {译} 航空航天热塑性聚氨酯弹性体中间膜通用技术规范 |
China National Standards last |
English PDF |
| GB/T 43121.1-2023 |
Ships and offshore technology Aquatic harmful species Part 1: Ballast water discharge sampling interface {译} 船舶和海上技术 水生有害物种 第1部分：压载水排放取样接口 |
China National Standards last |
English PDF |
| GB/T 43117-2023 |
Glass fiber reinforced thermoset plastic (GRP) pipes - Determination of ring creep properties in wet or dry conditions {译} 玻璃纤维增强热固性塑料（GRP）管 湿态或干态条件下环蠕变性能的测定 |
China National Standards last |
English PDF |
| GB/T 43116-2023 |
Fiber Reinforced Plastic Composites Composite Standard Certification Scheme including Reduced and Extended Certification {译} 纤维增强塑料复合材料 包括缩减和扩展认证的复合材料标准认证方案 |
China National Standards last |
English PDF |
| GB/T 43112-2023 |
Metallic materials - Determination of elastic modulus - Rate jump method {译} 金属材料 弹性模量测定 率跳跃方法 |
China National Standards last |
English PDF |
| GB/T 43086-2023 |
Plastics Polymer dispersions Determination of sieve residue {译} 塑料 聚合物分散体 筛余物的测定 |
China National Standards last |
English PDF |
| GB/T 43085-2023 |
Plastics Polymer dispersions Determination of free formaldehyde content {译} 塑料 聚合物分散体 游离甲醛含量的测定 |
China National Standards last |
English PDF |
| GB/T 43084.2-2023 |
Plastics - Fluoropolymer dispersions, molding and extrusion materials - Part 2: Specimen preparation and property determination {译} 塑料 含氟聚合物分散体、模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards last |
English PDF |
| GB/T 43084.1-2023 |
Plastics - Fluoropolymer dispersions, molding and extrusion materials - Part 1: Nomenclature system and basis for classification {译} 塑料 含氟聚合物分散体、模塑和挤出材料 第1部分:命名系统和分类基础 |
China National Standards last |
English PDF |
| GB/T 43019.7-2023 |
Determination of water vapor transmission rate of plastic films and sheets Part 7: Calcium corrosion method {译} 塑料薄膜和薄片水蒸气透过率的测定 第7部分：钙腐蚀法 |
China National Standards last |
English PDF |
| GB/T 43019.5-2023 |
Determination of water vapor transmission rate of plastic films and sheets Part 5: Pressure sensor method {译} 塑料薄膜和薄片水蒸气透过率的测定 第5部分：压力传感器法 |
China National Standards last |
English PDF |
| GB/T 43013-2023 |
Chemical fibers - Determination of dynamic elastic modulus - Acoustic pulse propagation method {译} 化学纤维 动态弹性模量的测定 声脉冲传播法 |
China National Standards last |
English PDF |
| GB/T 30200-2023 |
Energy consumption detection method of rubber plastic injection molding machine {译} 橡胶塑料注射成型机能耗检测方法 |
China National Standards last |
English PDF |
| GB/T 22789.2-2023 |
Plastic products Rigid polyvinyl chloride sheets (sheets) Part 2: Classification, size and properties of sheets with thickness less than 1mm {译} 塑料制品 硬质聚氯乙烯板（片）材 第2部分：厚度1mm以下片材的分类、尺寸和性能 |
China National Standards last |
English PDF |
| GB/T 22789.1-2023 |
Plastic products Rigid polyvinyl chloride sheets (sheets) Part 1: Classification, dimensions and properties of sheets with a thickness of 1 mm and above {译} 塑料制品 硬质聚氯乙烯板（片）材 第1部分：厚度1mm及以上板材的分类、尺寸和性能 |
China National Standards last |
English PDF |
| GB/T 18950-2023 |
Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. {译} 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定 |
China National Standards last |
English PDF |
| GB/T 1630.2-2023 |
Plastics Epoxy resins Part 2: Specimen preparation and property determination of cross-linked epoxy resins {译} 塑料 环氧树脂 第2部分:试样制备和交联环氧树脂的性能测定 |
China National Standards last |
English PDF |
| GB/T 12598-2023 |
Plastics Ion exchange resin Determination of sphericity rate after grinding and sphericity rate after grinding {译} 塑料 离子交换树脂 渗磨圆球率和磨后圆球率的测定 |
China National Standards last |
English PDF |
| GB/T 22648-2023 |
Aluminum-plastic composite hose, aluminum foil for battery soft packaging {译} 铝塑复合软管、电池软包用铝箔 |
China National Standards last |
English PDF |
| GB/T 5166-2023 |
Determination of elastic modulus of sintered metal materials and cemented carbide {译} 烧结金属材料和硬质合金弹性模量的测定 |
China National Standards last |
English PDF |
| GB/T 42952.1-2023 |
Thermoplastic pipes for fluid conveyance - Dimensions and tolerances - Part 1: Metric series {译} 流体输送用热塑性塑料管材 尺寸和公差 第1部分：公制系列 |
China National Standards last |
English PDF |
| GB/T 42923-2023 |
Glass fiber reinforced plastic products Determination of fiber length {译} 玻璃纤维增强塑料制品 纤维长度的测定 |
China National Standards last |
English PDF |
| GB/T 42924.4-2023 |
Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 4: Dynamic decomposition method using a cone corrosion meter. {译} 塑料 烟雾产生 燃烧流腐蚀性的测定 第4部分:使用锥形腐蚀计的动态分解法 |
China National Standards last |
English PDF |
| GB/T 42924.1-2023 |
Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 1: General terminology and applications. {译} 塑料 烟雾产生 燃烧流腐蚀性的测定 第1部分:通用术语和应用 |
China National Standards last |
English PDF |
| GB/T 42922-2023 |
Plastics - Determination of organic solvent extractables - Chemical methods {译} 塑料 有机溶剂可萃取物的测定 化学方法 |
China National Standards last |
English PDF |
| GB/T 42920-2023 |
Plastics - Evaluation of fire resistance properties and fire performance of fiber reinforced plastic composites {译} 塑料 纤维增强塑料复合材料耐火特性和防火性能的评定 |
China National Standards last |
English PDF |
| GB/T 42919.6-2023 |
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method based on temperature modulation technology {译} 塑料 导热系数和热扩散系数的测定 第6部分：基于温度调制技术的比较法 |
China National Standards last |
English PDF |
| GB/T 42919.4-2023 |
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method {译} 塑料 导热系数和热扩散系数的测定 第4部分:激光闪光法 |
China National Standards last |
English PDF |
| GB/T 42919.3-2023 |
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method {译} 塑料 导热系数和热扩散系数的测定 第3部分：温度波分析法 |
China National Standards last |
English PDF |
| GB/T 42919.1-2023 |
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles {译} 塑料 导热系数和热扩散系数的测定 第1部分:通则 |
China National Standards last |
English PDF |
| GB/T 42918.1-2023 |
Plastics - Thermoplastic polyurethanes for molding and extrusion - Part 1: Nomenclature system and basis for classification {译} 塑料 模塑和挤出用热塑性聚氨酯 第1部分：命名系统和分类基础 |
China National Standards last |
English PDF |
| GB/T 33061.7-2023 |
Plastics - Determination of dynamic mechanical properties - Part 7: Non-resonant torsional vibration method {译} 塑料 动态力学性能的测定 第7部分: 非共振扭转振动法 |
China National Standards last |
English PDF |
| GB/T 33061.6-2023 |
Plastics - Determination of dynamic mechanical properties - Part 6: Non-resonant shear vibration method {译} 塑料 动态力学性能的测定 第6部分：非共振剪切振动法 |
China National Standards last |
English PDF |
| GB/T 33061.5-2023 |
Plastics - Determination of dynamic mechanical properties - Part 5: Non-resonant bending vibration method {译} 塑料 动态力学性能的测定 第5部分：非共振弯曲振动法 |
China National Standards last |
English PDF |
| GB/T 33061.4-2023 |
Plastics - Determination of dynamic mechanical properties - Part 4: Non-resonant tensile vibration method {译} 塑料 动态力学性能的测定 第4部分: 非共振拉伸振动法 |
China National Standards last |
English PDF |
| GB/T 7139-2023 |
Plastics. Homopolymers and copolymers of vinyl chloride. Determination of chlorine content. {译} 塑料 氯乙烯均聚物和共聚物 氯含量的测定 |
China National Standards last |
English PDF |
| GB/T 33636-2023 |
Pneumatic Plug-in fittings for plastic pipes {译} 气动 用于塑料管的插入式管接头 |
China National Standards last |
English PDF |
| GB/T 41638.3-2023 |
Plastics - Carbon and environmental footprints of bio-based plastics - Part 3: Requirements and guidelines for the quantification of process carbon footprints {译} 塑料 生物基塑料的碳足迹和环境足迹 第3部分：过程碳足迹 量化要求与准则 |
China National Standards last |
English PDF |
| GB/T 41638.2-2023 |
Plastics - Carbon and environmental footprints of bio-based plastics - Part 2: Carbon footprint of materials - Amount (mass) of CO2 incorporated into polymer molecules from the air {译} 塑料 生物基塑料的碳足迹和环境足迹 第2部分：材料碳足迹 由空气中并入到聚合物分子中CO2的量（质量） |
China National Standards last |
English PDF |
| GB/T 42764-2023 |
Plastics - Evaluation of the intrinsic aerobic biodegradability of materials exposed to marine inoculum under laboratory mesophilic conditions - Test methods and requirements {译} 塑料 在实验室中温条件下暴露于海洋接种物的材料固有需氧生物分解能力评估 试验方法与要求 |
China National Standards last |
English PDF |
| GB/T 42519-2023 |
Rubber Standard Reference Elastomers (SREs) for characterizing the effect of liquids on vulcanized rubber {译} 橡胶 用于表征液体对硫化橡胶影响的标准参比弹性体（SREs） |
China National Standards last |
English PDF |
| GB/T 42612-2023 |
Compressed hydrogen plastic liner carbon fiber fully wound gas cylinder for vehicles {译} 车用压缩氢气塑料内胆碳纤维全缠绕气瓶 |
China National Standards last |
English PDF |
| GB/T 42610-2023 |
Test method for compatibility between plastic liner and hydrogen gas of high-pressure hydrogen cylinder {译} 高压氢气瓶塑料内胆和氢气相容性试验方法 |
China National Standards last |
English PDF |
| GB/T 4937.32-2023 |
Semiconductor devices - Methods of mechanical and climatic tests - Part 32: Flammability of plastic encapsulated devices (externally induced) {译} 半导体器件 机械和气候试验方法 第32部分：塑封器件的易燃性（外部引起的） |
China National Standards last |
English PDF |
| GB/T 4937.31-2023 |
Semiconductor devices - Methods of mechanical and climatic tests - Part 31: Flammability of plastic encapsulated devices (internal origin) {译} 半导体器件 机械和气候试验方法 第31部分：塑封器件的易燃性（内部引起的） |
China National Standards last |
English PDF |
| GB/T 42543-2023 |
Surface Chemical Analysis Scanning Probe Microscopy Determination of the Normal Elastic Constant of a Cantilever Beam {译} 表面化学分析 扫描探针显微术 悬臂梁法向弹性常数的测定 |
China National Standards last |
English PDF |
| GB/T 39248-2020 |
Specification for thermoplastic multi-layer (non-vulcanized) hose and hose assemblies for conveying liquefied petroleum gas and liquefied natural gas "No. 1 Amendment" {译} 输送液化石油气和液化天然气用热塑性塑料多层（非硫化）软管及软管组合件 规范《第1号修改单》 |
China National Standards last |
English PDF |
| GB/T 30020-2023 |
Glass defect detection method Photoelastic scanning method {译} 玻璃缺陷检测方法 光弹扫描法 |
China National Standards last |
English PDF |
| GB/T 28627-2023 |
Plastering plaster {译} 抹灰石膏 |
China National Standards last |
English PDF |
| GB/T 24721.5-2023 |
Glass fiber reinforced plastic products for road use - Part 5: Base plates for markings {译} 公路用玻璃纤维增强塑料产品 第5部分：标志底板 |
China National Standards last |
English PDF |
| GB/T 24721.4-2023 |
Glass fiber reinforced plastic products for road use - Part 4: Unpressurized communication manhole covers {译} 公路用玻璃纤维增强塑料产品 第4部分：非承压通信井盖 |
China National Standards last |
English PDF |
| GB/T 24721.3-2023 |
Glass fiber reinforced plastic products for road use - Part 3: Pipes {译} 公路用玻璃纤维增强塑料产品 第3部分：管道 |
China National Standards last |
English PDF |
| GB/T 24721.2-2023 |
Glass fiber reinforced plastic products for road use - Part 2: Pipe boxes {译} 公路用玻璃纤维增强塑料产品 第2部分：管箱 |
China National Standards last |
English PDF |
| GB/T 24721.1-2023 |
Glass fiber reinforced plastic products for road use - Part 1: General {译} 公路用玻璃纤维增强塑料产品 第1部分：通则 |
China National Standards last |
English PDF |
| GB/T 22048-2022 |
Determination of specific phthalate plasticizers in toys and children's products {译} 玩具及儿童用品中特定邻苯二甲酸酯增塑剂的测定 |
China National Standards last |
English PDF |
| GB/T 1040.2-2022 |
Plastics - Determination of tensile properties - Part 2: Test conditions for molded and extruded plastics {译} 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件 |
China National Standards last |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
