Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43497-2023 |
Electrodeposition layer and related finishing Electroless nickel phosphorus-ceramic composite coating {译} 电沉积层及相关精饰 化学镀镍磷-陶瓷复合镀层 |
China National Standards less |
 English PDF |
| GB/T 30422-2023 |
Electrodeless fluorescent lamps (other than self-ballasted lamps) Safety regulations {译} 无极荧光灯（自镇流灯除外） 安全规范 |
China National Standards less |
English PDF |
| GB/T 28054-2023 |
Steel seamless gas cylinder clustering device {译} 钢质无缝气瓶集束装置 |
China National Standards less |
English PDF |
| GB/T 22389-2023 |
Gapless metal oxide arrester for high voltage DC converter station {译} 高压直流换流站无间隙金属氧化物避雷器 |
China National Standards less |
English PDF |
| GB/T 17359-2023 |
Microbeam analysis Quantitative analysis of elements with atomic number not less than 11 by energy spectrometry {译} 微束分析 原子序数不小于11的元素能谱法定量分析 |
China National Standards less |
English PDF |
| GB/T 9808-2023 |
Seamless steel pipe for drilling {译} 钻探用无缝钢管 |
China National Standards less |
English PDF |
| GB 4234.9-2023 |
Surgical implants Metallic materials Part 9: Forged high nitrogen stainless steel {译} 外科植入物 金属材料 第9部分：锻造高氮不锈钢 |
China National Standards less |
English PDF |
| GB/T 43376-2023 |
Aerospace Heat treatable reinforced stainless steel parts surface cleaning {译} 航空航天 可热处理强化不锈钢零件表面清理 |
China National Standards less |
English PDF |
| GB/T 23802-2023 |
Technical delivery conditions for corrosion-resistant alloy seamless pipes for casing, tubing, coupling blanks and accessory materials for the oil and gas industry {译} 石油天然气工业 套管、油管、接箍毛坯及附件材料用耐蚀合金无缝管交货技术条件 |
China National Standards less |
English PDF |
| GB/T 43022.1-2023 |
Rail transit - DC surge arresters and voltage limiting devices - Part 1: Gapless metal oxide surge arresters {译} 轨道交通 直流避雷器和电压限制装置 第1部分：无间隙金属氧化物避雷器 |
China National Standards less |
English PDF |
| GB/T 4437.1-2023 |
Aluminum and aluminum alloy hot extruded tubes Part 1: Seamless round tubes {译} 铝及铝合金热挤压管 第1部分：无缝圆管 |
China National Standards less |
English PDF |
| GB/T 13296-2023 |
Stainless steel seamless steel pipes for boilers and heat exchangers {译} 锅炉、热交换器用不锈钢无缝钢管 |
China National Standards less |
English PDF |
| GB/Z 40602.4-2023 |
Radio interference from antennas and receiving systems Part 4: Wireless receiving systems Electromagnetic compatibility test methods for electronic equipment with integrated wireless modules {译} 天线及接收系统的无线电干扰 第4部分：无线接收系统 集成无线模块电子设备电磁兼容测试方法 |
China National Standards less |
English PDF |
| GB/T 5310-2023 |
Seamless steel pipe for high pressure boiler {译} 高压锅炉用无缝钢管 |
China National Standards less |
English PDF |
| GB/T 43201.2-2023 |
Industrial Automation Systems and Integration Standardized Procedures for Production Systems Engineering Part 2: Reference Process for Seamlessly Connecting Production Plans {译} 工业自动化系统与集成 生产系统工程的标准化程序 第2部分：无缝衔接生产计划的参考过程 |
China National Standards less |
English PDF |
| GB/T 43187-2023 |
Vehicle-mounted wireless communication terminal {译} 车载无线通信终端 |
China National Standards less |
English PDF |
| GB/T 43109-2023 |
Stainless steel composite steel plates for shipbuilding and offshore engineering {译} 船舶及海洋工程用不锈钢复合钢板 |
China National Standards less |
English PDF |
| GB/T 43107-2023 |
Stainless steel seamless steel pipe for instrument pressure induction in nuclear power plants {译} 核电站仪表引压用不锈钢无缝钢管 |
China National Standards less |
English PDF |
| GB/T 43105-2023 |
Seamless steel pipe for hydroformed parts {译} 液压成形件用无缝钢管 |
China National Standards less |
English PDF |
| GB/T 38775.8-2023 |
Wireless charging systems for electric vehicles Part 8: Special requirements for commercial vehicle applications {译} 电动汽车无线充电系统 第8部分：商用车应用特殊要求 |
China National Standards less |
English PDF |
| GB/T 24814-2023 |
Steel short link chain for lifting medium precision lifting chain grade 4 stainless steel {译} 起重用钢制短环链 中等精度吊链 4级不锈钢 |
China National Standards less |
English PDF |
| GB/T 24170.1-2023 |
Surface antibacterial stainless steel Part 1: Electrochemical method {译} 表面抗菌不锈钢 第1部分：电化学法 |
China National Standards less |
English PDF |
| GB/T 22789.2-2023 |
Plastic products Rigid polyvinyl chloride sheets (sheets) Part 2: Classification, size and properties of sheets with thickness less than 1mm {译} 塑料制品 硬质聚氯乙烯板（片）材 第2部分：厚度1mm以下片材的分类、尺寸和性能 |
China National Standards less |
English PDF |
| GB/T 20221-2023 |
Pressureless buried sewage and drainage rigid polyvinyl chloride (PVC-U) pipes {译} 无压埋地排污、排水用硬聚氯乙烯（PVC-U）管材 |
China National Standards less |
English PDF |
| GB/T 42675-2023 |
Antibacterial stainless steel welded steel pipes and fittings {译} 抗菌不锈钢焊接钢管及管件 |
China National Standards less |
English PDF |
| GB/T 42711-2023 |
Three-dimensional parking garage wireless power supply system technical requirements and test specifications {译} 立体停车库无线供电系统 技术要求及测试规范 |
China National Standards less |
English PDF |
| GB/T 23609-2023 |
Copper alloy seamless pipes for seawater desalination equipment {译} 海水淡化装置用铜合金无缝管 |
China National Standards less |
English PDF |
| GB/T 3624-2023 |
Titanium and titanium alloy seamless pipes {译} 钛及钛合金无缝管 |
China National Standards less |
English PDF |
| GB/T 42909-2023 |
Conductive adhesive tape for wireless terminal equipment {译} 无线终端设备用导电胶粘带 |
China National Standards less |
English PDF |
| GB/T 42677-2023 |
Non-destructive testing of steel pipes Liquid penetrant testing of surface defects in seamless and welded steel pipes {译} 钢管无损检测 无缝和焊接钢管表面缺欠的液体渗透检测 |
China National Standards less |
English PDF |
| GB/T 42673-2023 |
Non-destructive testing of steel pipes Magnetic particle testing of surface defects in ferromagnetic seamless and welded steel pipes {译} 钢管无损检测 铁磁性无缝和焊接钢管表面缺欠的磁粉检测 |
China National Standards less |
English PDF |
| GB/T 25821-2023 |
stainless steel strand {译} 不锈钢钢绞线 |
China National Standards less |
English PDF |
| GB/T 20490-2023 |
Non-destructive testing of steel pipes Automatic ultrasonic detection of delamination defects in seamless and welded steel pipes {译} 钢管无损检测 无缝和焊接钢管分层缺欠的自动超声检测 |
China National Standards less |
English PDF |
| GB/T 17899-2023 |
Corrosion of metals and alloys Potentiometric method for measuring the pitting corrosion potential of stainless steel in sodium chloride solution {译} 金属和合金的腐蚀 不锈钢在氯化钠溶液中点蚀电位的动电位测量方法 |
China National Standards less |
English PDF |
| GB/T 713.7-2023 |
Steel plates and strips for pressure equipment Part 7: Stainless steel and heat-resistant steel {译} 承压设备用钢板和钢带 第7部分：不锈钢和耐热钢 |
China National Standards less |
English PDF |
| GB/T 17626.11-2023 |
Electromagnetic compatibility - Testing and measurement techniques - Part 11: Immunity tests for voltage dips, short interruptions and voltage changes for equipment with input current less than or equal to 16 A per phase {译} 电磁兼容 试验和测量技术 第11部分：对每相输入电流小于或等于16 A设备的电压暂降、短时中断和电压变化抗扰度试验 |
China National Standards less |
English PDF |
| GB/T 3098.15-2023 |
Mechanical properties of fasteners Stainless steel nuts {译} 紧固件机械性能 不锈钢螺母 |
China National Standards less |
English PDF |
| GB/T 3098.6-2023 |
Mechanical properties of fasteners Stainless steel bolts, screws and studs {译} 紧固件机械性能 不锈钢螺栓、螺钉和螺柱 |
China National Standards less |
English PDF |
| GB/T 42650-2023 |
Spatial data and information transmission system Lossless and near-lossless compression of multispectral and hyperspectral images {译} 空间数据与信息传输系统 多光谱和高光谱图像无损及近无损压缩 |
China National Standards less |
English PDF |
| GB/T 42636-2023 |
Spatial data and information transmission system Lossless data compression {译} 空间数据与信息传输系统 无损数据压缩 |
China National Standards less |
English PDF |
| GB/T 12230-2023 |
General valves - technical specifications for stainless steel castings {译} 通用阀门 不锈钢铸件技术条件 |
China National Standards less |
English PDF |
| GB/T 33145-2023 |
Large volume steel seamless gas cylinder {译} 大容积钢质无缝气瓶 |
China National Standards less |
English PDF |
| GB/T 42778-2023 |
Soilless Grass Blanket {译} 无土草毯 |
China National Standards less |
English PDF |
| GB/T 42756.4-2023 |
Card and identification security devices - Contactless proximity objects - Part 4: Transmission protocols {译} 卡及身份识别安全设备 无触点接近式对象 第4部分：传输协议 |
China National Standards less |
English PDF |
| GB/T 42756.3-2023 |
Card and identification security devices - Contactless proximity objects - Part 3: Initialization and anti-collision {译} 卡及身份识别安全设备 无触点接近式对象 第3部分：初始化和防冲突 |
China National Standards less |
English PDF |
| GB/T 42756.2-2023 |
Card and identification security devices - Contactless proximity objects - Part 2: Radio frequency power and signal interfaces {译} 卡及身份识别安全设备 无触点接近式对象 第2部分：射频功率和信号接口 |
China National Standards less |
English PDF |
| GB/T 42756.1-2023 |
Card and identification security devices - Contactless proximity objects - Part 1: Physical characteristics {译} 卡及身份识别安全设备 无触点接近式对象 第1部分:物理特性 |
China National Standards less |
English PDF |
| GB/T 42614-2023 |
Sliding bearings - Determination of the limit value of σ0.01* for metal flangeless thin-walled bearing shells {译} 滑动轴承 金属无法兰薄壁轴瓦 σ0.01*极限值的测定 |
China National Standards less |
English PDF |
| GB/T 41754-2023 |
Duplex stainless steel plate for nuclear power plant {译} 核电站用双相不锈钢钢板 |
China National Standards less |
English PDF |
| GB/T 42512-2023 |
Copper alloy sheathed seamless coil {译} 铜合金护套无缝盘管 |
China National Standards less |
English PDF |
| GB/T 8464-2023 |
Iron, copper and stainless steel threaded connection valves {译} 铁制、铜制和不锈钢制螺纹连接阀门 |
China National Standards less |
English PDF |
| GB/T 41608-2022 |
Stainless steel precision foil {译} 不锈钢精密箔材 |
China National Standards less |
English PDF |
| GB/Z 41528-2022 |
Design Guidelines for Wireless Powered Kitchen Systems {译} 无线供电厨房系统设计导则 |
China National Standards less |
English PDF |
| GB/T 41544-2022 |
Spatio-temporal data specification for wireless network planning {译} 无线网络规划时空数据规范 |
China National Standards less |
English PDF |
| GB/T 3087-2022 |
Seamless steel pipe for low and medium pressure boiler {译} 低中压锅炉用无缝钢管 |
China National Standards less |
English PDF |
| GB/T 41666.3-2022 |
Plastic piping systems for Trenchless repair of underground pressureless drainage networks - Part 3: close fitting lining method {译} 地下无压排水管网非开挖修复用塑料管道系统 第 3 部分：紧密贴合内衬法 |
China National Standards less |
English PDF |
| GB/T 41157.3-2022 |
Fasteners for nuclear power plants—Part 3：Bolts, screws and studs made of corrosion-resistant stainless steel 核电厂用紧固件 第3部分：不锈钢螺栓、螺钉和螺柱 |
China National Standards less |
English PDF |
| GB/T 41157.4-2022 |
Fasteners for nuclear power plants—Part 4：Nuts made of corrosion-resistant stainless steel 核电厂用紧固件 第4部分：不锈钢螺母 |
China National Standards less |
English PDF |
| GB/T 41354-2022 |
Hydraulic Transmission Seamless or Welded Plain End Precision Steel Tube Dimensions and Nominal Pressures {译} 液压传动 无缝或焊接型的平端精密钢管 尺寸与公称压力 |
China National Standards less |
English PDF |
| GB/T 41351-2022 |
Safety of machinery - Safety-related wireless control devices - General specifications {译} 机械安全 安全相关无线控制装置 通用技术条件 |
China National Standards less |
English PDF |
| GB/T 41317-2022 |
Stainless steel corrugated hose for gas appliance connection {译} 燃气用具连接用不锈钢波纹软管 |
China National Standards less |
English PDF |
| GB/T 41966-2022 |
Phased array ultrasonic testing method for seamless steel pipe {译} 无缝钢管相控阵超声检测方法 |
China National Standards less |
English PDF |
| GB/T 42126.1-2022 |
Industrial Wireless Communication Specifications Based on Cellular Networks Part 1: General Technical Requirements {译} 基于蜂窝网络的工业无线通信规范 第1部分： 通用技术要求 |
China National Standards less |
English PDF |
| GB/T 42255-2022 |
General specification for stainless steel solid rivets for aerospace {译} 航空航天用不锈钢实心铆钉通用规范 |
China National Standards less |
English PDF |
| GB/T 41940-2022 |
Rubber - Determination of Viscosity and Stress Relaxation with a Rotorless Closed Shear Rheometer {译} 橡胶 用无转子密闭剪切流变仪测定黏度和应力松弛 |
China National Standards less |
English PDF |
| GB/Z 42004-2022 |
Consideration of the reference impedance and public power supply network impedance used to determine the disturbance characteristics of electrical equipment (rated current per phase less than or equal to 75A) {译} 确定电气设备（每相额定电流小于或等于75A）骚扰特性用的参考阻抗和公用供电网络阻抗的考虑 |
China National Standards less |
English PDF |
| GB/T 17396-2022 |
Hot-rolled seamless steel pipes for hydraulic props {译} 液压支柱用热轧无缝钢管 |
China National Standards less |
English PDF |
| GB/T 41998-2022 |
Mechanical electrical safety - Technical requirements for mechanical wireless control systems {译} 机械电气安全 机械无线控制系统技术要求 |
China National Standards less |
English PDF |
| GB/T 41875-2022 |
Seamless Thin Wall Molybdenum Tube {译} 无缝薄壁钼管 |
China National Standards less |
English PDF |
| GB/T 40783.2-2022 |
Information technology - Telecommunication and information exchange between systems - Magnetic domain network - Part 2: In-band wireless charging control protocol {译} 信息技术 系统间远程通信和信息交换 磁域网 第2部分：带内无线充电控制协议 |
China National Standards less |
English PDF |
| GB/T 18931-2022 |
Classification of alkaline dense shaped refractory products with carbon content less than 7% {译} 碳含量小于7%的碱性致密定形耐火制品分类 |
China National Standards less |
English PDF |
| GB/T 38775.5-2021 |
Electric vehicle wireless power transfer—Part 5: Electromagnetic compatibility requirements and test methods 电动汽车无线充电系统 第5部分：电磁兼容性要求和试验方法 |
China National Standards less |
English PDF |
| GB/T 38775.6-2021 |
Electric vehicle wireless power transfer—Part 6：Interoperability requirements and testing—Gground side 电动汽车无线充电系统 第6部分：互操作性要求及测试 地面端 |
China National Standards less |
English PDF |
| GB/T 38775.7-2021 |
Electric vehicle wireless power transfer—Part 7:Interoperability requirements and testing—Vehicle side 电动汽车无线充电系统 第7部分：互操作性要求及测试 车辆端 |
China National Standards less |
English PDF |
| GB/T 40393-2021 |
Corrosion of metals and alloys—Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels 金属和合金的腐蚀 奥氏体不锈钢晶间腐蚀敏感性加速腐蚀试验方法 |
China National Standards less |
English PDF |
| GB/T 40355-2021 |
Stainless steel vacuum container 不锈钢真空保温容器 |
China National Standards less |
English PDF |
| GB/T 40317-2021 |
Seamless stainless steel pipes for oxygen pipeline 氧气管线用不锈钢无缝钢管 |
China National Standards less |
English PDF |
| GB/T 40314-2021 |
Corrosion of metals and alloys—Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel 金属和合金的腐蚀 适用于不锈钢平板或管状试样的碟形弹簧缝隙腐蚀构型 |
China National Standards less |
English PDF |
| GB/T 40297-2021 |
Seamless austenitic stainless steel pipes for high pressure hydrogenation unit 高压加氢装置用奥氏体不锈钢无缝钢管 |
China National Standards less |
English PDF |
| GB/T 18248-2021 |
Seamless steel tubes for gas cylinder 气瓶用无缝钢管 |
China National Standards less |
English PDF |
| GB/T 3639-2021 |
Seamless cold-drawn or cold-rolled steel tubes for precision applications 冷拔或冷轧精密无缝钢管 |
China National Standards less |
English PDF |
| GB/T 40101-2021 |
Ultrasonic testing method for stainless steel bars,plates and forgings of PWR nuclear fuel assembly and associated assembly 压水堆核燃料组件和相关组件用不锈钢棒、板、锻件超声波检测方法 |
China National Standards less |
English PDF |
| GB/T 40080-2021 |
Nondestructive testing of steel tubes—Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness 钢管无损检测 用于确认无缝和焊接钢管（埋弧焊除外）水压密实性的自动电磁检测方法 |
China National Standards less |
English PDF |
| GB/T 11640-2021 |
Seamless aluminum alloy gas cylinders 铝合金无缝气瓶 |
China National Standards less |
English PDF |
| GB/T 3093-2021 |
High-pressure seamless steel tubes for diesel engine 柴油机用高压无缝钢管 |
China National Standards less |
English PDF |
| GB/T 39856-2021 |
Hot rolled titanium and titanium alloy seamless tubes 热轧钛及钛合金无缝管材 |
China National Standards less |
English PDF |
| GB/T 11760-2021 |
Hulless barley 青稞 |
China National Standards less |
English PDF |
| GB/T 26024-2021 |
Seamless copper and copper alloys tube for valves on air-conditioning and refrigeration system 空调与制冷系统阀件用铜及铜合金无缝管 |
China National Standards less |
English PDF |
| GB/T 17215.673-2021 |
Electricity metering data exchange -- The DLMS/COSEM suite -- Part 73: Wired and wireless M-Bus communication profiles for local and neighbourhood networks 电测量数据交换 DLMS/COSEM组件 第73部分：本地和社区网络的有线和无线M-Bus通信配置 |
China National Standards less |
English PDF |
| GB/T 40695-2021 |
Information technology—Telecommunications and information exchange between systems—Wireless network access requirements based on IPv6 信息技术 系统间远程通信和信息交换 基于IPv6的无线网络接入要求 |
China National Standards less |
English PDF |
| GB/T 38775.6-2021 |
Electric vehicle wireless power transfer—Part 6:Interoperability requirements and testing—Ground side 电动汽车无线充电系统 第6部分：互操作性要求及测试 地面端 |
China National Standards less |
English PDF |
| GB/T 38775.7-2021 |
Electric vehicle wireless power transfer—Part 7:Interoperability requirements and testing—Vehicle side 电动汽车无线充电系统 第7部分：互操作性要求及测试 车辆端 |
China National Standards less |
English PDF |
| GB/T 38775.5-2021 |
Electric vehicle wireless power transfer—Part 5:Electromagnetic compatibility requirements and test methods 电动汽车无线充电系统 第5部分：电磁兼容性要求和试验方法 |
China National Standards less |
English PDF |
| GB/T 40422-2021 |
General technical requirements of converging wireless sensor networks and mobile communication network 无线传感器网络与电信网络结合的总体技术要求 |
China National Standards less |
English PDF |
| GB/T 39534-2020 |
Corrosion of metals and alloys—Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids 金属和合金的腐蚀 液体中不锈钢和镍基合金均匀腐蚀速率测定方法 |
China National Standards less |
English PDF |
| GB/T 39191-2020 |
Heat treatment for stainless steel and heat resistant steel parts 不锈钢和耐热钢件热处理 |
China National Standards less |
English PDF |
| GB/T 26291-2020 |
Seamless copper-nickel alloys tube for ships 舰船用铜镍合金无缝管 |
China National Standards less |
English PDF |
| GB/T 26302-2020 |
Seamless copper and copper alloy tube for heat pipe 热管用铜及铜合金无缝管 |
China National Standards less |
English PDF |
| GB/T 20928-2020 |
Seamless inner grooved copper tube 无缝内螺纹铜管 |
China National Standards less |
English PDF |
| GB/T 39077-2020 |
Test methods for detecting detrimental phases in lean duplex austenitic-ferritic stainless steels 经济型奥氏体-铁素体双相不锈钢中有害相的检测方法 |
China National Standards less |
English PDF |
| GB/T 26790.4-2020 |
Industrial wireless networks WIA specification—Part 4: WIA-FA protocol conformance test specification 工业无线网络WIA规范 第4部分：WIA-FA协议一致性测试规范 |
China National Standards less |
English PDF |
| GB/T 39033-2020 |
Austenitic-ferritic duplex stainless steel wire rods 奥氏体-铁素体型双相不锈钢盘条 |
China National Standards less |
English PDF |
| GB/T 38884-2020 |
High temperature stainless steels for bearing 高温不锈轴承钢 |
China National Standards less |
English PDF |
| GB/T 38810-2020 |
Seamless stainless steel pipes for liquefied natural gas 液化天然气用不锈钢无缝钢管 |
China National Standards less |
English PDF |
| GB/T 38807-2020 |
General specification for super austenitic stainless steels 超级奥氏体不锈钢通用技术条件 |
China National Standards less |
English PDF |
| GB/T 30269.809-2020 |
Information technology—Sensor networks—Part 809：Testing：Conformance testing for the network layer of wireless sensor networks based on IP protocol 信息技术 传感器网络 第809部分：测试：基于IP的无线传感器网络网络层协议一致性测试 |
China National Standards less |
English PDF |
| GB/T 20111.5-2020 |
Electrical insulation systems—Procedures for thermal evaluation—Part 5: Applications with a designed life of 5000h or less 电气绝缘系统 热评定规程 第5部分:设计寿命5000h及以下的应用 |
China National Standards less |
English PDF |
| GB/T 21833.2-2020 |
Seamless austenitic-ferritic (duplex) stainless steel tubes and pipes—Part 2: Pipes for fluid service 奥氏体-铁素体型双相不锈钢无缝钢管 第2部分：流体输送用管 |
China National Standards less |
English PDF |
| GB/T 21833.1-2020 |
Seamless austenitic-ferritic (duplex) stainless steel tubes and pipes—Part 1: Tubes for heat exchanger 奥氏体-铁素体型双相不锈钢无缝钢管 第1部分：热交换器用管 |
China National Standards less |
English PDF |
| GB/T 4334-2020 |
Corrosion of metals and alloys－Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels 金属和合金的腐蚀 奥氏体及铁素体-奥氏体（双相）不锈钢晶间腐蚀试验方法 |
China National Standards less |
English PDF |
| GB/T 3090-2020 |
Seamless small diameter stainless steel tubes 不锈钢小直径无缝钢管 |
China National Standards less |
English PDF |
| GB/T 3089-2020 |
Seamless ultra-thin wall stainless steel tubes 不锈钢极薄壁无缝钢管 |
China National Standards less |
English PDF |
| GB/T 38775.3-2020 |
Electric vehicle wireless power transfer—Part 3: Specific requirements 电动汽车无线充电系统 第3部分：特殊要求 |
China National Standards less |
English PDF |
| GB/T 38775.1-2020 |
Electric vehicle wireless power transfer—Part 1:General requirements 电动汽车无线充电系统 第1部分：通用要求 |
China National Standards less |
English PDF |
| GB/T 38775.4-2020 |
Electric vehicle wireless power transfer—Part 4：Limits and test methods of electromagnetic environment 电动汽车无线充电系统 第4部分：电磁环境限值与测试方法 |
China National Standards less |
English PDF |
| GB/T 38775.2-2020 |
Electric vehicle wireless power transfer—Part 2: Communication protocols between on-board charger and wireless power transfer device 电动汽车无线充电系统 第2部分：车载充电机和无线充电设备之间的通信协议 |
China National Standards less |
English PDF |
| GB/T 38618-2020 |
Information technology—Telecommunications and information exchange between systems—Specification for high reliability and low latency wireless network communication protocol 信息技术 系统间远程通信和信息交换高可靠低时延的无线网络通信协议规范 |
China National Standards less |
English PDF |
| GB/T 38695-2020 |
Technical specification for ballastless track of urban rail transit 城市轨道交通无砟轨道技术条件 |
China National Standards less |
English PDF |
| GB/T 38681-2020 |
Seamless corrosion resistant alloy pipes and tubes for industrial furnace 工业炉用耐蚀合金无缝管 |
China National Standards less |
English PDF |
| GB/T 38474-2020 |
House hold stainless steel sink 家用不锈钢水槽 |
China National Standards less |
English PDF |
| GB/T 51419-2020 |
Standard for design of wireless local area network engineering 无线局域网工程设计标准 |
China National Standards less |
English PDF |
| GB/T 39567-2020 |
General specification for brushless servo motor systems for multi-rotor unmanned aircraft 多旋翼无人机用无刷伺服电动机系统通用规范 |
China National Standards less |
English PDF |
| GB/T 39560.701-2020 |
Determination of certain substances in electrical and electronic products—Part 7-1:Hexavalent chromium—Presence of hexavalent chromium [Cr(VI)] in colourless and coloured corrosion-protected coatings on metals by the colorimetric method 电子电气产品中某些物质的测定 第7-1部分：六价铬 比色法测定金属上无色和有色防腐镀层中的六价铬[Cr(VI)] |
China National Standards less |
English PDF |
| GB/T 39545.3-2020 |
Design and selection of components for enclosed gear drives—Part 3: Shaft-to-hub juncture with keyless fits 闭式齿轮传动装置的零部件设计和选择 第3部分：轴和轮毂的无键配合连接 |
China National Standards less |
English PDF |
| GB/T 39227-2020 |
Immunity time testing method under voltage dip for sensitive process rated less than 1000 V 1000 V以下敏感过程电压暂降免疫时间测试方法 |
China National Standards less |
English PDF |
| GB/T 3098.25-2020 |
Mechanical properties of fasteners—Guidance for the selection of stainless steels and nickel alloys for fasteners 紧固件机械性能 不锈钢和镍合金紧固件选用指南 |
China National Standards less |
English PDF |
| GB/T 3098.24-2020 |
Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications 紧固件机械性能 高温用不锈钢和镍合金螺栓、螺钉、螺柱和螺母 |
China National Standards less |
English PDF |
| GB/T 39246-2020 |
Prefabricated directly buried insulating fittings with seamless high density polyethylene casing pipe 高密度聚乙烯无缝外护管预制直埋保温管件 |
China National Standards less |
English PDF |
| GB/T 28029.8-2020 |
Electronic railway equipment—Train communication network (TCN）—Part 2-7: Radio based Wireless Train Backbone (WLTB) 轨道交通电子设备 列车通信网络（TCN） 第2-7部分：基于电台的无线列车骨干网（WLTB） |
China National Standards less |
English PDF |
| GB/T 39451-2020 |
Specification for contactless delivery service of commodities 商品无接触配送服务规范 |
China National Standards less |
English PDF |
| GB/T 5777-2019 |
Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections 无缝和焊接（埋弧焊除外）钢管纵向和/或横向缺欠的全圆周自动超声检测 |
China National Standards less |
English PDF |
| GB/T 38365-2019 |
Technical procedure on smokeless production of copper phosphorus brazing filler metals 铜磷钎料无烟尘生产技术规范 |
China National Standards less |
English PDF |
| GB/T 5310-2017 |
Seamless steel tubes and pipes for high pressure boiler 高压锅炉用无缝钢管《第01号修改单》 |
China National Standards less |
English PDF |
| GB/T 37923-2019 |
Trackless mining truck for open-pit mines—Safety requirements 露天矿用无轨运矿车 安全要求 |
China National Standards less |
English PDF |
| GB/T 37778-2019 |
Recommended process for laser beam welding on stainless steels 不锈钢激光焊接推荐工艺规范 |
China National Standards less |
English PDF |
| GB/T 37687-2019 |
Information technology—Low-power wireless charger general specification for electronic information products 信息技术 电子信息产品用低功率无线充电器通用规范 |
China National Standards less |
English PDF |
| GB/T 7962.23-2019 |
Test method of colourless optical glass—Part 23: Resistance to climatic 无色光学玻璃测试方法 第23部分：耐气候稳定性 |
China National Standards less |
English PDF |
| GB/T 7962.22-2019 |
Test method of colourless optical glass—Part 22：Resistance to attack by aqueous alkaline phosphate-containing 无色光学玻璃测试方法 第22部分：耐磷酸稳定性 |
China National Standards less |
English PDF |
| GB/T 7962.21-2019 |
Test method of colourless optical glass—Part 21：Resistance to attack by aqueous alkaline solutions 无色光学玻璃测试方法 第21部分：耐碱稳定性 |
China National Standards less |
English PDF |
| GB/T 37614-2019 |
Corrosion-resistant alloy seamless tube and pipe 耐蚀合金无缝管 |
China National Standards less |
English PDF |
| GB/T 37610-2019 |
Corrosion-resistant alloy small diameter precision seamless tubes 耐蚀合金小口径精密无缝管 |
China National Standards less |
English PDF |
| GB/T 37578-2019 |
Urea grade ultra-low carbon austenitic seamless stainless steel tubes and pipes
尿素级超低碳奥氏体不锈钢无缝钢管 |
China National Standards less |
English PDF |
| GB/T 37570-2019 |
Copper alloy sheet for oilless bearing 无油轴承用铜合金板 |
China National Standards less |
English PDF |
| GB/T 24588-2019 |
Stainless steel spring wires 不锈弹簧钢丝 |
China National Standards less |
English PDF |
| GB/T 5777-2019 |
Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections 无缝和焊接（埋弧焊除外）钢管纵向和/或横向缺欠的全圆周自动超声检测 |
China National Standards less |
English PDF |
| GB/T 4232-2019 |
Stainless steel wire for cold heading and cold forging 冷顶锻用不锈钢丝 |
China National Standards less |
English PDF |
| GB/T 3086-2019 |
High carbon chromium stainless bearing steels 高碳铬不锈轴承钢 |
China National Standards less |
English PDF |
| GB/T 37430-2019 |
High strength stainless structural steel for constructions 建筑结构用高强不锈钢 |
China National Standards less |
English PDF |
| GB/Z 37754-2019 |
Guidance on clearances and creepage distances in particular for distances equal to or less than 2mm—Test results of research on influencing parameters 关于确定不超过2mm距离的电气间隙和爬电距离的指南 对影响参数进行研究的试验结果 |
China National Standards less |
English PDF |
| GB/T 37751.31-2019 |
Residual current operated circuit-breakers for household and similar use—Part 3-1:Particular requirements for RCDs with screwless-type terminals for external copper conductors 家用和类似用途的剩余电流动作断路器 第3-1部分：具有连接外部铜导线的无螺纹型接线端子的RCD的特殊要求 |
China National Standards less |
English PDF |
| GB/T 4240-2019 |
Stainless steel wires 不锈钢丝 |
China National Standards less |
English PDF |
| GB/T 903-2019 |
Colourless optical glass 无色光学玻璃 |
China National Standards less |
English PDF |
| GB/T 37020-2018 |
Information technology—Telecommunications and information exchange between systems—Local and metropolitan area networks—Specific requirements—Medium access control and physical layer specification for video wireless personal area networks（VPAN 信息技术-系统间远程通信和信息交换-局域网和城域网-特定要求-面向视频的无线个域网（VPAN）媒体访问控制和物理层规范 |
China National Standards less |
English PDF |
| GB/T 30269.808-2018 |
Information technology—Sensor network—Part 808:Testing:Network layer and application support sublayer security for low-rate wireless sensor network 信息技术-传感器网络-第808部分：测试：低速率无线传感器网络网络层和应用支持子层安全 |
China National Standards less |
English PDF |
| GB/T 37132-2018 |
General requirements and test methods of electromagnetic compatibility for wireless power transmission equipment 无线充电设备的电磁兼容性通用要求和测试方法 |
China National Standards less |
English PDF |
| GB/T 36996-2018 |
Permanent magnet disc coreless generator for wind turbines 风力发电机组用永磁盘式无铁芯发电机 |
China National Standards less |
English PDF |
| GB/T 51292-2018 |
Wireless communication indoor coverage system engineering technical standards 无线通信室内覆盖系统工程技术标准 |
China National Standards less |
English PDF |
| GB/T 50398-2018 |
Seamless steel pipe engineering design standard 无缝钢管工程设计标准 |
China National Standards less |
English PDF |
| GB/T 21832.1-2018 |
Welded austenitic-ferritic (duplex) stainless steel tubes and pipes—Part 1:Tubes for heat exchanger 奥氏体-铁素体型双相不锈钢焊接钢管 第1部分：热交换器用管 |
China National Standards less |
English PDF |
| GB/T 21832.2-2018 |
Welded austenitic-ferritic (duplex) stainless steel tubes and pipes—Part 2:Pipes for fluid transport 奥氏体-铁素体型双相不锈钢焊接钢管 第2部分：流体输送用管 |
China National Standards less |
English PDF |
| GB/T 36226-2018 |
Stainless steel—Determination of manganse, nickel, chromium, molybdenum, copper and titanium—Handheld energy dispersive X-Ray fluorescence spectrometric method (semiquantitative method) 不锈钢 锰、镍、铬、钼、铜和钛含量的测定 手持式能量色散X射线荧光光谱法(半定量法) |
China National Standards less |
English PDF |
| GB/T 8163-2018 |
Seamless steel pipes for liquid service 输送流体用无缝钢管 |
China National Standards less |
English PDF |
| GB/T 20409-2018 |
Seamless multi-rifled steel tubes for high-pressure boiler 高压锅炉用内螺纹无缝钢管 |
China National Standards less |
English PDF |
| GB/T 8162-2018 |
Seamless steel tubes for structural purposes 结构用无缝钢管 |
China National Standards less |
English PDF |
| GB/T 30269.303-2018 |
Information technology—Sensor networks—Part 303: Communication and information exchange: Network layer specification for wireless sensor networks based on IP protocol 信息技术 传感器网络 第303部分：通信与信息交换：基于IP的无线传感器网络网络层规范 |
China National Standards less |
English PDF |
| GB/T 17853-2018 |
Tubular cored electrodes for stainless steels 不锈钢药芯焊丝 |
China National Standards less |
English PDF |
| GB/T 36145-2018 |
Profiled stainless steel sheet for buildings 建筑用不锈钢压型板 |
China National Standards less |
English PDF |
| GB/T 36454-2018 |
Information technology—Telecommunications and information exchange between systems—Medium access control and physical layer specifications for middle-high throughput wireless local area network 信息技术 系统间远程通信和信息交换 中高速无线局域网媒体访问控制和物理层规范 |
China National Standards less |
English PDF |
| GB/T 36458-2018 |
Information technology—Customer premises cabling for wireless access points 信息技术 无线接入点的用户建筑群布缆 |
China National Standards less |
English PDF |
| GB/T 24593-2018 |
Welded austenitic stainless steel tubes for boiler and heat exchanger 锅炉和热交换器用奥氏体不锈钢焊接钢管 |
China National Standards less |
English PDF |
| GB/T 36330-2018 |
Information technology—Technical requirements of wireless sensor network system for gas meter remote management 信息技术 面向燃气表远程管理的无线传感器网络系统技术要求 |
China National Standards less |
English PDF |
| GB/T 36440-2018 |
Information technology—Telecommunications and information exchange between systems local and metropolitan area networks—Specific requirements—Low-rate wireless personal area network physical layer(PHY) specification for anti-interference 信息技术 系统间远程通信和信息交换局域网和城域网 特定要求 抗干扰低速无线个域网物理层规范 |
China National Standards less |
English PDF |
| GB/T 36707-2018 |
Hot rolled carbon steel and stainless steel clad bars for the reinforcement of concrete 钢筋混凝土用热轧碳素钢-不锈钢复合钢筋 |
China National Standards less |
English PDF |
| GB/T 36027-2018 |
Austenitic stainless steel bars for nuclear power plants 核电站用奥氏体不锈钢棒 |
China National Standards less |
English PDF |
| GB/T 17854-2018 |
Solid wire electrodes /flux combinations for submerged arc welding of stainless steels 埋弧焊用不锈钢焊丝-焊剂组合分类要求 |
China National Standards less |
English PDF |
| GB/T 34859-2017 |
General specification for brushless resolver 无刷旋转变压器通用技术条件 |
China National Standards less |
English PDF |
| GB/T 34860-2017 |
General specification for slotless permanent-magnet motor 无槽永磁电动机通用技术条件 |
China National Standards less |
English PDF |
| GB/T 34984-2017 |
Information technology—Telecommunications and information exchange between systems—Local and metropolitan area networks—MAC and PHY specification for ultra high rate wireless personal area network 信息技术 系统间远程通信和信息交换 局域网和城域网 超高速无线个域网的媒体访问控制和物理层规范 |
China National Standards less |
English PDF |
| GB/T 16797-2017 |
Carbonless copy paper 无碳复写纸 |
China National Standards less |
English PDF |
| GB/T 34472-2017 |
General technical requirements of stainless steel for building curtain wall 建筑幕墙用不锈钢通用技术条件 |
China National Standards less |
English PDF |
| GB/T 34475-2017 |
Urea grade austenitic stainless steel bars 尿素级奥氏体不锈钢棒 |
China National Standards less |
English PDF |
| GB/T 34439-2017 |
Household appliances—Wireless power transmitter 家用电器 无线电能发射器 |
China National Standards less |
English PDF |
| GB/T 8546-2017 |
Titanium clad stainless steel plate 钛-不锈钢复合板 |
China National Standards less |
English PDF |
| GB/T 3804-2017 |
High-voltage alternating current switches for rated voltage above 3.6 kV and less than 40.5 kV 3.6 kV～40.5 kV高压交流负荷开关 |
China National Standards less |
English PDF |
| GB/T 6886-2017 |
Sintered stainless steel filter elements 烧结不锈钢过滤元件 |
China National Standards less |
English PDF |
| GB/T 34150-2017 |
Printing machinery-Web-fed solventless laminating machine 印刷机械 卷筒料无溶剂复合机 |
China National Standards less |
English PDF |
| GB/T 34201-2017 |
Seamless hot-rolled square and rectangular steel tubes for structure 结构用方形和矩形热轧无缝钢管 |
China National Standards less |
English PDF |
| GB/T 34200-2017 |
Cold rolled stainless steel plate,sheet and strip for construction roof and curtain 建筑屋面和幕墙用冷轧不锈钢钢板和钢带 |
China National Standards less |
English PDF |
| GB/T 34209-2017 |
Stainless steel—Determination of multi-element contents—Glow discharge optical emission spectrometry 不锈钢 多元素含量的测定 辉光放电原子发射光谱法 |
China National Standards less |
English PDF |
| GB/T 34221-2017 |
stainless steel kettle 不锈钢水壶 |
China National Standards less |
English PDF |
| GB/T 34109-2017 |
Seamless steel tubes for drill rod of rotary digging machine 旋挖机钻杆用无缝钢管 |
China National Standards less |
English PDF |
| GB/T 34107-2017 |
Seamless precision stainless steel pipes for rail transit vehicle braking system 轨道交通车辆制动系统用精密不锈钢无缝钢管 |
China National Standards less |
English PDF |
| GB/T 34105-2017 |
Seamless steel tubes for ocean engineering structures 海洋工程结构用无缝钢管 |
China National Standards less |
English PDF |
| GB/T 34096-2017 |
Mobile payment—Test methods for contactless reader terminal based on 2.45GHz range controlled communication technology 手机支付 基于2.45GHz RCC（限域通信）技术的非接触式读写器终端测试方法 |
China National Standards less |
English PDF |
| GB/T 33966-2017 |
Seamless abrasion-resistant steel pipes for mortar service 输送砂浆用耐磨无缝钢管 |
China National Standards less |
English PDF |
| GB/T 18033-2017 |
Seamless copper tubes for water and gas 无缝铜水管和铜气管 |
China National Standards less |
English PDF |
| GB/T 33959-2017 |
Stainless steel bars for the reinforcement of concrete 钢筋混凝土用不锈钢钢筋 |
China National Standards less |
English PDF |
| GB/T 33926-2017 |
Stainless steel pipe fitting of ring compression 不锈钢环压式管件 |
China National Standards less |
English PDF |
| GB/T 26831.4-2017 |
Specification for reading system of energy metering in community—Part 4：Wireless meter readout 社区能源计量抄收系统规范 第4部分：仪表的无线抄读 |
China National Standards less |
English PDF |
| GB/T 26831.5-2017 |
Specification for reading system of energy metering in community—Part 5：Wireless relaying 社区能源计量抄收系统规范 第5部分：无线中继 |
China National Standards less |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
