Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43619-2023 |
Overpressure protection safety device Controlled safety pressure relief system {译} 超压保护安全装置 受控安全泄压系统 |
China National Standards pressure |
 English PDF |
| GB/T 43537-2023 |
Sound system equipment Headphones and personal music players Maximum sound pressure level measurement method {译} 声系统设备 耳机及个人音乐播放器 最大声压级测量方法 |
China National Standards pressure |
English PDF |
| GB/T 43324-2023 |
Foil Bearings Gas Dynamic pressure Thrust Bearing Performance Static Load Capacity, Friction Torque, Friction Factor and Life Test {译} 箔片轴承 气体动压止推轴承性能 静态承载能力、摩擦力矩、摩擦因数和寿命测试 |
China National Standards pressure |
English PDF |
| GB/T 18688-2023 |
Agricultural irrigation equipment - pressure loss in irrigation valves - Test methods {译} 农业灌溉设备 灌溉阀的压力损失 试验方法 |
China National Standards pressure |
English PDF |
| GB/T 19699-2023 |
Ships and Offshore Technology Cargo Tank pressure-Vacuum Valves and Flame Arrestors {译} 船舶和海上技术 液货舱压力-真空阀和阻火装置 |
China National Standards pressure |
English PDF |
| GB/T 43316.4-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 4: Ball or pin pressure method {译} 塑料 耐环境应力开裂(ESC)的测定 第4部分:球压或针压法 |
China National Standards pressure |
English PDF |
| GB 8599-2023 |
Technical requirements for large pressure steam sterilizers {译} 大型压力蒸汽灭菌器技术要求 |
China National Standards pressure |
English PDF |
| GB/T 6881-2023 |
Acoustics - Determination of sound power level and sound energy level of noise sources by sound pressure method - Reverberation chamber precision method {译} 声学 声压法测定噪声源声功率级和声能量级 混响室精密法 |
China National Standards pressure |
English PDF |
| GB/T 5310-2023 |
Seamless steel pipe for high pressure boiler {译} 高压锅炉用无缝钢管 |
China National Standards pressure |
English PDF |
| GB/T 43142-2023 |
Ultra-high pressure water jet ship rust removal complete equipment {译} 超高压水射流船舶除锈成套装备 |
China National Standards pressure |
English PDF |
| GB/T 43139-2023 |
Density testing of cast aluminum alloy liquid reduced pressure solidification samples {译} 铸造铝合金液减压凝固试样密度检测 |
China National Standards pressure |
English PDF |
| GB/T 43123-2023 |
Ship and Offshore Technology LNG Fuel Gas Supply System (FGSS) High pressure Pump Performance Test Requirements {译} 船舶与海上技术 LNG燃气供应系统（FGSS）高压泵性能测试要求 |
China National Standards pressure |
English PDF |
| GB/T 43107-2023 |
Stainless steel seamless steel pipe for instrument pressure induction in nuclear power plants {译} 核电站仪表引压用不锈钢无缝钢管 |
China National Standards pressure |
English PDF |
| GB/T 43073-2023 |
Pneumatics - Test method for measuring sound pressure levels of exhaust mufflers {译} 气动 测量排气消声器声压级的试验方法 |
China National Standards pressure |
English PDF |
| GB/T 43062-2023 |
Nuclear energy - Determination of neutron fluence and number of atomic dislocations (dpa) in reactor pressure vessels and internal components {译} 核能 反应堆压力容器和堆内构件中子注量和原子离位次数（dpa）的确定 |
China National Standards pressure |
English PDF |
| GB/T 43019.5-2023 |
Determination of water vapor transmission rate of plastic films and sheets Part 5: pressure sensor method {译} 塑料薄膜和薄片水蒸气透过率的测定 第5部分：压力传感器法 |
China National Standards pressure |
English PDF |
| GB/T 29171-2023 |
Determination of rock capillary pressure curve {译} 岩石毛管压力曲线的测定 |
China National Standards pressure |
English PDF |
| GB/T 25368-2023 |
Diesel engine electronically controlled common rail system high-pressure fuel supply pump assembly {译} 柴油机电控共轨系统 高压供油泵总成 |
China National Standards pressure |
English PDF |
| GB/T 20221-2023 |
pressureless buried sewage and drainage rigid polyvinyl chloride (PVC-U) pipes {译} 无压埋地排污、排水用硬聚氯乙烯（PVC-U）管材 |
China National Standards pressure |
English PDF |
| GB/T 19258.2-2023 |
Sources of ultraviolet radiation for germicidal purposes Part 2: Cold cathode low pressure mercury vapor discharge lamps {译} 杀菌用紫外辐射源 第2部分：冷阴极低气压汞蒸气放电灯 |
China National Standards pressure |
English PDF |
| GB/T 13664-2023 |
Rigid polyvinyl chloride (PVC-U) pipes for low-pressure irrigation {译} 低压灌溉用硬聚氯乙烯（PVC-U）管材 |
China National Standards pressure |
English PDF |
| GB/T 42911-2023 |
Carbon fiber reinforced composite materials accelerated moisture absorption and supersaturation adjustment method for sealed pressure vessels {译} 碳纤维增强复合材料 密封压力容器加速吸湿和过饱和调节方法 |
China National Standards pressure |
English PDF |
| GB/T 42857-2023 |
Safety requirements for pressure swing adsorption hydrogen purification system {译} 变压吸附提纯氢气系统安全要求 |
China National Standards pressure |
English PDF |
| GB/T 25198-2023 |
pressure vessel head {译} 压力容器封头 |
China National Standards pressure |
English PDF |
| GB/T 29918-2023 |
Test method for pressure-composition isotherm (PCI) of rare earth hydrogen storage alloys {译} 稀土系储氢合金 压力-组成等温线（PCI）的测试方法 |
China National Standards pressure |
English PDF |
| GB/T 713.7-2023 |
Steel plates and strips for pressure equipment Part 7: Stainless steel and heat-resistant steel {译} 承压设备用钢板和钢带 第7部分：不锈钢和耐热钢 |
China National Standards pressure |
English PDF |
| GB/T 713.6-2023 |
Steel plates and strips for pressure-bearing equipment Part 6: Quenched and tempered high-strength steels {译} 承压设备用钢板和钢带 第6部分：调质高强度钢 |
China National Standards pressure |
English PDF |
| GB/T 713.5-2023 |
Steel plates and strips for pressure equipment Part 5: High manganese steels with specified low temperature properties {译} 承压设备用钢板和钢带 第5部分：规定低温性能的高锰钢 |
China National Standards pressure |
English PDF |
| GB/T 713.4-2023 |
Steel plates and strips for pressure equipment Part 4: Nickel alloy steels with specified low temperature properties {译} 承压设备用钢板和钢带 第4部分：规定低温性能的镍合金钢 |
China National Standards pressure |
English PDF |
| GB/T 713.3-2023 |
Steel plates and strips for pressure equipment Part 3: Low alloy steels with specified low temperature properties {译} 承压设备用钢板和钢带 第3部分：规定低温性能的低合金钢 |
China National Standards pressure |
English PDF |
| GB/T 713.2-2023 |
Steel plates and strips for pressure equipment Part 2: Non-alloy and alloy steels with specified temperature properties {译} 承压设备用钢板和钢带 第2部分：规定温度性能的非合金钢和合金钢 |
China National Standards pressure |
English PDF |
| GB/T 713.1-2023 |
Steel plates and strips for pressure equipment Part 1: General requirements {译} 承压设备用钢板和钢带 第1部分：一般要求 |
China National Standards pressure |
English PDF |
| GB/T 20818.13-2023 |
Industrial process measurement and control. Data structures and elements in process equipment catalogs. Part 13: List of properties (LOP) for electronic data exchange of pressure measuring equipment. {译} 工业过程测量和控制 过程设备目录中的数据结构和元素 第13部分：压力测量设备电子数据交换用属性列表（LOP） |
China National Standards pressure |
English PDF |
| GB/T 28782.2-2023 |
Hydraulic transmissions - Measurement technology Part 2: Measurement of mean steady-state pressure in closed circuits {译} 液压传动 测量技术 第2部分：密闭回路中平均稳态压力的测量 |
China National Standards pressure |
English PDF |
| GB/T 42542-2023 |
Fiber-reinforced composite materials, sealed pressure vessel, accelerated moisture absorption and supersaturated state adjustment method {译} 纤维增强复合材料 密封压力容器加速吸湿及过饱和状态调节方法 |
China National Standards pressure |
English PDF |
| GB/T 7233.2-2023 |
Steel castings - Ultrasonic testing - Part 2: High pressure steel castings {译} 铸钢件 超声检测 第2部分：高承压铸钢件 |
China National Standards pressure |
English PDF |
| GB/T 42434-2023 |
General specification for aircraft constant pressure variable hydraulic pump {译} 飞机恒压变量液压泵通用规范 |
China National Standards pressure |
English PDF |
| GB/T 42605-2023 |
Guidelines for Repair of Portable pressure Vessels {译} 移动式压力容器修理导则 |
China National Standards pressure |
English PDF |
| GB/T 42606-2023 |
Guidelines for Repair of Stationary pressure Vessels {译} 固定式压力容器修理导则 |
China National Standards pressure |
English PDF |
| GB/T 42610-2023 |
Test method for compatibility between plastic liner and hydrogen gas of high-pressure hydrogen cylinder {译} 高压氢气瓶塑料内胆和氢气相容性试验方法 |
China National Standards pressure |
English PDF |
| GB/T 42536-2023 |
Combination valve for high-pressure hydrogen storage cylinders for vehicles {译} 车用高压储氢气瓶组合阀门 |
China National Standards pressure |
English PDF |
| GB/Z 42625-2023 |
Vacuum technology Vacuum gauges Quadrupole mass spectrometer characteristics for partial pressure measurement {译} 真空技术 真空计 用于分压力测量的四极质谱仪特性 |
China National Standards pressure |
English PDF |
| GB/T 42594-2023 |
Guidelines for Hazard Classification of Media for pressure Equipment {译} 承压设备介质危害分类导则 |
China National Standards pressure |
English PDF |
| GB/T 42595-2023 |
Basic requirements for pressure equipment repair {译} 承压设备修理基本要求 |
China National Standards pressure |
English PDF |
| GB/T 42567.2-2023 |
Reference conditions and procedures for testing transmitters for industrial process measurement Part 2: Specific procedures for pressure transmitters {译} 工业过程测量变送器试验的参比条件和程序 第2部分：压力变送器的特定程序 |
China National Standards pressure |
English PDF |
| GB/T 42191-2023 |
MEMS piezoresistive pressure sensitive device performance test method {译} MEMS压阻式压力敏感器件性能试验方法 |
China National Standards pressure |
English PDF |
| GB/T 42155-2023 |
Hydraulic transmission - Spin-on filter inspection method - Rated fatigue life and rated static burst pressure of pressure shell {译} 液压传动 旋装滤检验方法 承压壳体额定疲劳寿命和额定静态爆破压力 |
China National Standards pressure |
English PDF |
| GB/T 42368-2023 |
Method for Determination of Explosive Limits of Combustible Gas (Steam) under High Temperature and High pressure Conditions {译} 高温高压条件下可燃气体（蒸气）爆炸极限测定方法 |
China National Standards pressure |
English PDF |
| GB/T 42426-2023 |
Chemical Vapor pressure Test {译} 化学品 蒸气压试验 |
China National Standards pressure |
English PDF |
| GB/T 41645-2022 |
General technical specification for ultra-high pressure food quality control {译} 超高压食品质量控制通用技术规范 |
China National Standards pressure |
English PDF |
| GB/T 26610.5-2022 |
Implementation guidelines for risk-based inspection of pressure equipment systems Part 5: Quantitative analysis methods for failure consequences {译} 承压设备系统基于风险的检验实施导则 第5部分：失效后果定量分析方法 |
China National Standards pressure |
English PDF |
| GB/T 26610.4-2022 |
Implementation Guidelines for Risk-Based Inspection of pressure Equipment Systems Part 4: Quantitative Analysis Method of Failure Possibility {译} 承压设备系统基于风险的检验实施导则 第4部分：失效可能性定量分析方法 |
China National Standards pressure |
English PDF |
| GB/T 26610.2-2022 |
Implementation guidelines for risk-based inspection of pressure equipment systems Part 2: Risk-based inspection strategy {译} 承压设备系统基于风险的检验实施导则 第2部分：基于风险的检验策略 |
China National Standards pressure |
English PDF |
| GB/T 26610.1-2022 |
Implementation guidelines for risk-based inspection of pressure equipment systems Part 1: Basic requirements and implementation procedures {译} 承压设备系统基于风险的检验实施导则 第1部分：基本要求和实施程序 |
China National Standards pressure |
English PDF |
| GB/T 41647-2022 |
Polyolefin hose for heat-shrinkable medium-pressure joints {译} 热收缩中压接头用聚烯烃软管 |
China National Standards pressure |
English PDF |
| GB/Z 41506-2022 |
Hydraulic transmission - Fatigue pressure test for metal pressure shells - Evaluation method {译} 液压传动 金属承压壳体的疲劳压力试验 评价方法 |
China National Standards pressure |
English PDF |
| GB/T 18997.2-2020 |
Aluminum plastic composite pressure pipe part 2: aluminum pipe butt welded aluminum plastic pipe No. 1 amendment {译} 铝塑复合压力管 第2部分：铝管对接焊式铝塑管《第1号修改单》 |
China National Standards pressure |
English PDF |
| GB/T 18997.1-2020 |
Aluminum plastic composite pressure pipes - Part 1: lap welded aluminum plastic pipes for aluminum pipes - amendment No. 1 {译} 铝塑复合压力管 第1部分：铝管搭接焊式铝塑管《第1号修改单》 |
China National Standards pressure |
English PDF |
| GB/T 13761.1-2022 |
Geosynthetics - Determination of thickness under specified pressure - Part 1: single layer products {译} 土工合成材料 规定压力下厚度的测定 第1部分：单层产品 |
China National Standards pressure |
English PDF |
| GB/T 11828.2-2022 |
Water level measuring instruments - Part 2: pressure type water level gauge {译} 水位测量仪器 第2部分：压力式水位计 |
China National Standards pressure |
English PDF |
| GB/T 3087-2022 |
Seamless steel pipe for low and medium pressure boiler {译} 低中压锅炉用无缝钢管 |
China National Standards pressure |
English PDF |
| GB/T 41666.3-2022 |
Plastic piping systems for Trenchless repair of underground pressureless drainage networks - Part 3: close fitting lining method {译} 地下无压排水管网非开挖修复用塑料管道系统 第 3 部分：紧密贴合内衬法 |
China National Standards pressure |
English PDF |
| GB/T 41422-2022 |
Oriented rigid polyvinyl chloride (PVC-O) pipes and connectors for pressure water transmission {译} 压力输水用取向硬聚氯乙烯(PVC-O)管材和连接件 |
China National Standards pressure |
English PDF |
| GB/T 3222.2-2022 |
Acoustics—Description, measurement and assessment of environmental noise—Part 2: Determination of sound pressure levels 声学 环境噪声的描述、测量与评价 第2部分：声压级测定 |
China National Standards pressure |
English PDF |
| GB/T 17248.1-2022 |
Acoustics—Noise emitted by machinery and equipment—Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions 声学 机器和设备发射的噪声 测定工作位置和其他指定位置发射声压级的基础标准使用导则 |
China National Standards pressure |
English PDF |
| GB/T 30580-2022 |
The technical guide for the life assessment of main pressure parts of power plant boiler 电站锅炉主要承压部件寿命评估技术导则 |
China National Standards pressure |
English PDF |
| GB/T 22688-2022 |
pressure-type temperature controls for household and similar use 家用和类似用途压力式温度控制器 |
China National Standards pressure |
English PDF |
| GB/T 8446.2-2022 |
Heat sinks for power semiconductor devices—Part 2: Measurement methods of thermal resistance and inlet-outlet fluid pressure drop 电力半导体器件用散热器 第2部分：热阻和流阻测量方法 |
China National Standards pressure |
English PDF |
| GB/T 16507.4-2022 |
Water-tube boilers—Part 4: Strength calculation of pressure parts 水管锅炉 第4部分：受压元件强度计算 |
China National Standards pressure |
English PDF |
| GB/T 41354-2022 |
Hydraulic Transmission Seamless or Welded Plain End Precision Steel Tube Dimensions and Nominal pressures {译} 液压传动 无缝或焊接型的平端精密钢管 尺寸与公称压力 |
China National Standards pressure |
English PDF |
| GB/T 30579-2022 |
Damage modes identification for pressure equipments 承压设备损伤模式识别 |
China National Standards pressure |
English PDF |
| GB/T 5073-2022 |
Refractory materials - pressure creep test method {译} 耐火材料 压蠕变试验方法 |
China National Standards pressure |
English PDF |
| GB/T 13927-2022 |
Industrial valve pressure test {译} 工业阀门 压力试验 |
China National Standards pressure |
English PDF |
| GB/T 12085.23-2022 |
Optics and photonics - Environmental test methods - Part 23: Combined test for low pressure and low temperature, atmospheric temperature, high temperature or damp heat {译} 光学和光子学 环境试验方法 第23部分：低压与低温、大气温度、高温或湿热综合试验 |
China National Standards pressure |
English PDF |
| GB/T 12085.8-2022 |
Optics and photonics - Environmental test methods - Part 8: High internal pressure, low internal pressure, immersion {译} 光学和光子学 环境试验方法 第8部分：高内压、低内压、浸没 |
China National Standards pressure |
English PDF |
| GB/T 19258.1-2022 |
Germicidal ultraviolet radiation sources - part 1: low pressure mercury vapor discharge lamps {译} 杀菌用紫外辐射源 第1部分:低气压汞蒸气放电灯 |
China National Standards pressure |
English PDF |
| GB/T 41822-2022 |
Hot helium leak detection method for high temperature pressure-bearing parts of nuclear fusion reactor {译} 核聚变堆高温承压部件的热氦检漏方法 |
China National Standards pressure |
English PDF |
| GB/T 1038.2-2022 |
Plastics - Films and sheets - Test methods for gas permeability - Part 2: Equal pressure method {译} 塑料制品 薄膜和薄片 气体透过性试验方法 第2部分：等压法 |
China National Standards pressure |
English PDF |
| GB/T 1038.1-2022 |
Plastics - Films and sheets - Test methods for gas permeability - Part 1: Differential pressure method {译} 塑料制品 薄膜和薄片 气体透过性试验方法 第1部分：差压法 |
China National Standards pressure |
English PDF |
| GB/T 41872-2022 |
Heat exchangers used in refrigeration systems and heat pumps—Temperature, pressure and velocity three-field synergy performance test and evaluation method {译} 制冷系统及热泵用换热器 温度、压力和速度三场协同的性能测试和评价方法 |
China National Standards pressure |
English PDF |
| GB/T 15623.3-2022 |
Hydraulic transmission - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves {译} 液压传动 电调制液压控制阀 第3部分：压力控制阀试验方法 |
China National Standards pressure |
English PDF |
| GB/T 41981.2-2022 |
Connections for hydraulic transmissions - pressure fittings - Part 2: Connectable under pressure {译} 液压传动连接 测压接头 第2部分：可带压连接式 |
China National Standards pressure |
English PDF |
| GB/T 41981.1-2022 |
Connections for hydraulic transmissions - pressure fittings - Part 1: Non-pressurized connections {译} 液压传动连接 测压接头 第1部分：非带压连接式 |
China National Standards pressure |
English PDF |
| GB/T 41980.2-2022 |
Hydraulic transmissions - Determination of pressure fluctuations in systems and components - Part 2: Hydraulic pumps (simplified method) {译} 液压传动 系统和元件中压力波动的测定方法 第2部分：液压泵（简化法） |
China National Standards pressure |
English PDF |
| GB/T 41980.1-2022 |
Hydraulic transmissions - Determination of pressure fluctuations in systems and components - Part 1: Hydraulic pumps (precision method) {译} 液压传动 系统和元件中压力波动的测定方法 第1部分：液压泵（精密法） |
China National Standards pressure |
English PDF |
| GB/T 42057-2022 |
pressure test methods for submersibles and their pressure equipment {译} 潜水器及其承压设备压力试验方法 |
China National Standards pressure |
English PDF |
| GB/T 11059-2022 |
Determination of vapor pressure of crude oil - Expansion method {译} 原油蒸气压的测定 膨胀法 |
China National Standards pressure |
English PDF |
| GB 20826-2021 |
Code of safety for the use of high pressure water jetting equipment by divers 潜水员高压水射流作业安全规程 |
China National Standards pressure |
English PDF |
| GB/T 40548-2021 |
Technical specification of separate layers pressure control and combined layers drainage for coalbed methane wells 煤层气井分层控压合层排采技术规范 |
China National Standards pressure |
English PDF |
| GB/T 40541-2021 |
Structural design requirements of metal pressure vessels for space system 航天金属压力容器结构设计要求 |
China National Standards pressure |
English PDF |
| GB/T 40297-2021 |
Seamless austenitic stainless steel pipes for high pressure hydrogenation unit 高压加氢装置用奥氏体不锈钢无缝钢管 |
China National Standards pressure |
English PDF |
| GB/T 38206.5-2021 |
Methods to assess the reliability of pneumatic components—Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves 气动元件可靠性评估方法 第5部分：止回阀、梭阀、双压阀（与阀）、单向节流阀及快排阀 |
China National Standards pressure |
English PDF |
| GB/T 38206.4-2021 |
Methods to assess the reliability of pneumatic components—Part 4: pressure regulators 气动元件可靠性评估方法 第 4 部分：调压阀 |
China National Standards pressure |
English PDF |
| GB/T 20081.3-2021 |
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators 气动 减压阀和过滤减压阀 第3部分：测试减压阀流量特性的可选方法 |
China National Standards pressure |
English PDF |
| GB/T 20081.2-2021 |
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 2: Test methods to determine the main characteristics to be included in literature from suppliers 气动 减压阀和过滤减压阀 第 2 部分：评定商务文件中应包含的主要特性的试验方法 |
China National Standards pressure |
English PDF |
| GB/T 20081.1-2021 |
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 1:Main characteristics to be included in literature from suppliers and product-marking requirements 气动 减压阀和过滤减压阀 第1部分：商务文件中应包含的主要特性和产品标识要求 |
China National Standards pressure |
English PDF |
| GB 20826-2021 |
Code of safety for the use of high pressure water jetting equipment by divers 潜水员高压水射流作业安全规程 |
China National Standards pressure |
English PDF |
| GB/T 40122-2021 |
Full face tunnel boring machine - Rectangular earth pressure balance pipe jacking machine 全断面隧道掘进机 矩形土压平衡顶管机 |
China National Standards pressure |
English PDF |
| GB/T 40073-2021 |
External pressure strength test procedure for metal pressure hull of submersibles 潜水器金属耐压壳外压强度试验方法 |
China National Standards pressure |
English PDF |
| GB/T 40064-2021 |
External pressure strength test procedure for metal pressure hull of submersibles 节能技术评价导则 |
China National Standards pressure |
English PDF |
| GB/T 3093-2021 |
High-pressure seamless steel tubes for diesel engine 柴油机用高压无缝钢管 |
China National Standards pressure |
English PDF |
| GB/T 39794.2-2021 |
Test method for wind uplift resistance of mental roof—Part 2:Dynamic pressure method 金属屋面抗风掀性能检测方法 第2部分：动态压力法 |
China National Standards pressure |
English PDF |
| GB/T 21432-2021 |
Graphite pressure vessels 石墨制压力容器 |
China National Standards pressure |
English PDF |
| GB/T 39748.7-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分：称重法测定压力作用下的吸液量 |
China National Standards pressure |
English PDF |
| GB/T 39957-2021 |
High pressure metal die casting units—Technical requirements 压铸单元 技术条件 |
China National Standards pressure |
English PDF |
| GB/T 39956.2-2021 |
Pneumatic fluid power—Electro-pneumatic pressure control valves—Part 2: Test methods to determine main characteristics to include in the supplier's literature 气动 电-气压力控制阀 第2部分：评定商务文件中应包含的主要特性的试验方法 |
China National Standards pressure |
English PDF |
| GB/T 39956.1-2021 |
Pneumatic fluid power—Electro-pneumatic pressure control valves—Part 1:Main characteristics to include in the supplier's literature 气动 电-气压力控制阀 第1部分：商务文件中应包含的主要特性 |
China National Standards pressure |
English PDF |
| GB/T 39794.1-2021 |
Test method for wind uplift resistance of metal roof -- Part 1: Static pressure method 金属屋面抗风掀性能检测方法 第1部分：静态压力法 |
China National Standards pressure |
English PDF |
| GB/T 19934.1-2021 |
Hydraulic fluid power—Fatigue pressure testing of metal pressure-containing envelopes—Part 1: Test method 液压传动 金属承压壳体的疲劳压力试验 第1部分：试验方法 |
China National Standards pressure |
English PDF |
| GB/T 12242-2021 |
pressure relief devices—Performance test code 压力释放装置 性能试验方法 |
China National Standards pressure |
English PDF |
| GB/T 8100.3-2021 |
Mounting surfaces of hydraulic valves—Part 3: pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves 液压阀安装面 第3部分：减压阀、顺序阀、卸荷阀、节流阀和单向阀 |
China National Standards pressure |
English PDF |
| GB/T 41053-2021 |
Full face tunnel boring machine—Dual modes (earth pressure balanced and slurry balanced) tunnel boring machine 全断面隧道掘进机 土压平衡-泥水平衡双模式掘进机 |
China National Standards pressure |
English PDF |
| GB/T 13259-2021 |
High-pressure sodium vapour lamps—Performance requirements 高压钠灯 性能要求 |
China National Standards pressure |
English PDF |
| GB/T 40938-2021 |
Leather—Physical and mechanical tests—Determination of water penetration pressure 皮革 物理和机械试验 水渗透压测定 |
China National Standards pressure |
English PDF |
| GB/T 40574-2021 |
General specification of inspection robot for large industrial pressure equipments 大型工业承压设备检测机器人通用技术条件 |
China National Standards pressure |
English PDF |
| GB/T 39533-2020 |
Preparation and testing of foamed cement slurries at atmospheric pressure 常压下泡沫水泥浆的制备及试验方法 |
China National Standards pressure |
English PDF |
| GB 8369.2-2020 |
Transfusion sets for single use—Part 2: With pressure infusion apparatus use 一次性使用输血器 第2部分：压力输血设备用 |
China National Standards pressure |
English PDF |
| GB 27790-2020 |
City gas pressure regulator
城镇燃气调压器 |
China National Standards pressure |
English PDF |
| GB 27791-2020 |
City gas pressure regulating installation 城镇燃气调压箱 |
China National Standards pressure |
English PDF |
| GB/T 39194-2020 |
Technical requirement of heat treatment for vacuum low pressure carburizing high pressure gas quenching 真空低压渗碳高压气淬热处理技术要求 |
China National Standards pressure |
English PDF |
| GB 39177-2020 |
Minimum allowable values of energy efficiency and energy efficiency grades for electric pressure cookers 电压力锅能效限定值及能效等级 |
China National Standards pressure |
English PDF |
| GB/T 38942-2020 |
pressure piping code—Utility piping 压力管道规范 公用管道 |
China National Standards pressure |
English PDF |
| GB/T 2423.27-2020 |
Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests 环境试验 第2部分：试验方法 试验方法和导则：温度/低气压或温度/湿度/低气压综合试验 |
China National Standards pressure |
English PDF |
| GB/T 38594-2020 |
Water supply devices with superimposing pipe pressure 管网叠压供水设备 |
China National Standards pressure |
English PDF |
| GB/T 38657-2020 |
Specifications for low pressure feed water heater for conventional island in nuclear power station 核电厂常规岛低压加热器技术条件 |
China National Standards pressure |
English PDF |
| GB/T 38653-2020 |
Specifications for high pressure feed water heater for conventional island in nuclear power station 核电厂常规岛高压加热器技术条件 |
China National Standards pressure |
English PDF |
| GB/T 38523-2020 |
Preparation of mixed gas pressure method 混合气体的制备 压力法 |
China National Standards pressure |
English PDF |
| GB/T 38512-2020 |
Aluminum and aluminum alloy tubes for the pressure vessel 压力容器用铝及铝合金管材 |
China National Standards pressure |
English PDF |
| GB/T 20801.1-2020 |
pressure piping code--Industrial piping--Part 1: General 压力管道规范 工业管道 第1部分:总则 |
China National Standards pressure |
English PDF |
| GB/T 39709-2020 |
Test methods of multiple units glass, windiows static pressure and windiows sealing performance 动车组玻璃、车窗耐静压及车窗密封性能试验方法 |
China National Standards pressure |
English PDF |
| GB/T 25178-2020 |
Reduced-pressure type backflow preventer 减压型倒流防止器 |
China National Standards pressure |
English PDF |
| GB/T 39383-2020 |
Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints 埋地用无压热塑性塑料管道系统 弹性密封圈接头的密封性能试验方法 |
China National Standards pressure |
English PDF |
| GB/T 39379-2020 |
Thermoplastics piping systems for non-pressure applications—Test method for watertightness 无压热塑性塑料管道系统 水密性试验方法 |
China National Standards pressure |
English PDF |
| GB/T 26135-2020 |
High pressure cleaning unit 高压清洗机 |
China National Standards pressure |
English PDF |
| GB/T 20801.6-2020 |
pressure piping code—Industrial piping—Part 6:Safeguarding 压力管道规范 工业管道 第6部分：安全防护 |
China National Standards pressure |
English PDF |
| GB/T 20801.5-2020 |
pressure piping code—Industrial piping—Part 5:Inspection and testing 压力管道规范 工业管道 第5部分:检验与试验 |
China National Standards pressure |
English PDF |
| GB/T 20801.4-2020 |
pressure piping code—Industrial piping—Part 4:Fabrication and assembly 压力管道规范 工业管道 第4部分:制作与安装 |
China National Standards pressure |
English PDF |
| GB/T 20801.3-2020 |
pressure pipng code—Industrial piping—Part 3:Design and calculation 压力管道规范 工业管道 第3部分：设计和计算 |
China National Standards pressure |
English PDF |
| GB/T 20801.2-2020 |
pressure piping code—Industrial piping—Part 2:Materials 压力管道规范 工业管道 第2部分:材料 |
China National Standards pressure |
English PDF |
| GB/T 18997.2-2020 |
Plastic/aluminum/ plastic composite pressure pipes—Part 2: Composite pipes butt-welded by aluminum pipe 铝塑复合压力管 第2部分：铝管对接焊式铝塑管 |
China National Standards pressure |
English PDF |
| GB/T 18997.1-2020 |
Plastic/aluminum/plastic composite pressure pipes—Part 1: Composite pipes overlap-welded by aluminum pipe 铝塑复合压力管 第1部分：铝管搭接焊式铝塑管 |
China National Standards pressure |
English PDF |
| GB/T 39493-2020 |
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—pressure regulators 燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 压力调节装置 |
China National Standards pressure |
English PDF |
| GB/T 39311-2020 |
Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification 热塑性软管和软管组合件 液压用钢丝或合成纱线增强单一压力型 规范 |
China National Standards pressure |
English PDF |
| GB/T 39309-2020 |
Rubber hoses and hose assemblies—Wire- or textile-reinforced single-pressure types for hydraulic applications—Specification 橡胶软管和软管组合件 液压用钢丝或织物增强单一压力型 规范 |
China National Standards pressure |
English PDF |
| GB/T 15331-2020 |
Test method for water vapor transmission rate of pressure-sensitive tapes 压敏胶粘带水蒸气透过率试验方法 |
China National Standards pressure |
English PDF |
| GB/T 15330-2020 |
Test method for water penetration rate of pressure-sensitive tapes 压敏胶粘带水渗透率试验方法 |
China National Standards pressure |
English PDF |
| GB/T 23711.8-2019 |
Test method for pressure vessels lined with plastics—Part 8:High-resistance testing 塑料衬里压力容器试验方法 第8部分：耐高电阻试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.7-2019 |
Test method for pressure vessels lined with plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分：泄漏试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.6-2019 |
Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分：耐压试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.5-2019 |
Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分：冷热循环检验 |
China National Standards pressure |
English PDF |
| GB/T 23711.4-2019 |
Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分：耐负压检验 |
China National Standards pressure |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards pressure |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.1-2019 |
Test method for pressure vessels lined with plastics—Part 1:Spark testing 塑料衬里压力容器试验方法 第1部分：电火花试验 |
China National Standards pressure |
English PDF |
| GB/T 18442.4-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 4：Fabrication 固定式真空绝热深冷压力容器 第4部分：制造 |
China National Standards pressure |
English PDF |
| GB/T 18442.3-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 3：Design 固定式真空绝热深冷压力容器 第3部分：设计 |
China National Standards pressure |
English PDF |
| GB/T 18442.2-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 2:Materials 固定式真空绝热深冷压力容器 第2部分:材料 |
China National Standards pressure |
English PDF |
| GB/T 18442.1-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 1:General requirements 固定式真空绝热深冷压力容器 第1部分:总则 |
China National Standards pressure |
English PDF |
| GB/T 7755.2-2019 |
Rubber, vulcanized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第2部分：等压法 |
China National Standards pressure |
English PDF |
| GB/T 18442.6-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 6：Safety protection 固定式真空绝热深冷压力容器 第6部分：安全防护 |
China National Standards pressure |
English PDF |
| GB/T 18442.5-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 5：Inspection and testing 固定式真空绝热深冷压力容器 第5部分：检验与试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.7-2019 |
Test method for pressure vessels lined with plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分：泄漏试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.6-2019 |
Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分：耐压试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.5-2019 |
Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分：冷热循环检验 |
China National Standards pressure |
English PDF |
| GB/T 23711.4-2019 |
Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分：耐负压检验 |
China National Standards pressure |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards pressure |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards pressure |
English PDF |
| GB/T 18442.4-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 4：Fabrication 固定式真空绝热深冷压力容器 第4部分：制造 |
China National Standards pressure |
English PDF |
| GB/T 18442.3-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 3：Design 固定式真空绝热深冷压力容器 第3部分：设计 |
China National Standards pressure |
English PDF |
| GB/T 18442.2-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 2:Materials 固定式真空绝热深冷压力容器 第2部分:材料 |
China National Standards pressure |
English PDF |
| GB/T 18442.1-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 1:General requirements 固定式真空绝热深冷压力容器 第1部分:总则 |
China National Standards pressure |
English PDF |
| GB/T 7755.2-2019 |
Rubber, vulcanized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第2部分：等压法 |
China National Standards pressure |
English PDF |
| GB 18564.1-2019 |
Road tanker for dangerous liquid goods transportation—Part1:Technical requirements of atmospheric pressure metal tank 道路运输液体危险货物罐式车辆 第1部分：金属常压罐体技术要求 |
China National Standards pressure |
English PDF |
| GB/T 5922-2008 |
Motor vehicles and towed vehicles - pressure test connection for compressed-air pneumatic braking equipment 汽车和挂车 气压制动装置压力测试连接器技术要求《第1号修改单》 |
China National Standards pressure |
English PDF |
| GB/T 5310-2017 |
Seamless steel tubes and pipes for high pressure boiler 高压锅炉用无缝钢管《第01号修改单》 |
China National Standards pressure |
English PDF |
| GB/T 37916-2019 |
Safety specification for small electric high pressure cleaning/washer 小型电动高压清洗机安全规范 |
China National Standards pressure |
English PDF |
| GB/T 37892-2019 |
Digital integrated full frequency conversion controlled constant pressure water supply equipment 数字集成全变频控制恒压供水设备 |
China National Standards pressure |
English PDF |
| GB/T 37888-2019 |
Sealant material in terrestrial photovoltaic(PV) modules—pressure sensitive adhesive tape 地面光伏组件用密封材料 压敏胶粘带 |
China National Standards pressure |
English PDF |
| GB/T 37825-2019 |
Test method for simulating wind pressure resistance of building glass under the uniform static loads 建筑玻璃均布静载模拟风压试验方法 |
China National Standards pressure |
English PDF |
| GB/T 37816-2019 |
Selection and installation of pressure relief devices on pressure equipment 承压设备安全泄放装置选用与安装 |
China National Standards pressure |
English PDF |
| GB/T 16253-2019 |
Steel castings for pressure purposes 承压钢铸件 |
China National Standards pressure |
English PDF |
| GB/T 19624-2019 |
Safety assessment of in-service pressure vessels containing defects 在用含缺陷压力容器安全评定 |
China National Standards pressure |
English PDF |
| GB/T 19314.5-2019 |
Small craft—Hull construction and scantlings—Part 5:Design pressures for monohulls,design stresses,scantlings determination 小艇 艇体结构和构件尺寸 第5部分：单体船设计压力、设计应力、构件尺寸的确定 |
China National Standards pressure |
English PDF |
| GB/T 19314.4-2019 |
Small craft—Hull construction and scantlings—Part 5:Design pressures for monohulls,design stresses,scantlings determination 小艇 艇体结构和构件尺寸 第4部分：车间和制造 |
China National Standards pressure |
English PDF |
| GB/T 2423.63-2019 |
Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode) 环境试验 第2部分:试验方法 试验:温度(低温、高温)/低气压/振动(混合模式)综合 |
China National Standards pressure |
English PDF |
| GB/T 1048-2019 |
Pipework components—Definition and selection of nominal pressure 管道元件 公称压力的定义和选用 |
China National Standards pressure |
English PDF |
| GB/T 32065.14-2019 |
Environmental test methods for oceanographic instruments—Part 15：Hydrostatic pressure test 海洋仪器环境试验方法 第14部分:振动试验 |
China National Standards pressure |
English PDF |
| GB/T 26136-2018 |
Ultra-high pressure waterjet cutting machine 超高压水切割机 |
China National Standards pressure |
English PDF |
| GB/T 2980-2018 |
Size designation，dimensions,inflation pressure and load capacity for earth-mover tyres 工程机械轮胎规格、尺寸、气压与负荷 |
China National Standards pressure |
English PDF |
| GB/T 22038-2018 |
Method of automobile tyre static contact pressure distribution 汽车轮胎静态接地压力分布试验方法 |
China National Standards pressure |
English PDF |
| GB/T 17248.2-2018 |
Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections 声学-机器和设备发射的噪声-在一个反射面上方可忽略环境修正的近似自由场测定工作位置和其他指定位置的发射声压级 |
China National Standards pressure |
English PDF |
| GB/T 17248.3-2018 |
Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections 声学-机器和设备发射的噪声-采用近似环境修正测定工作位置和其他指定位置的发射声压级 |
China National Standards pressure |
English PDF |
| GB/T 17248.5-2018 |
Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections 声学-机器和设备发射的噪声-采用准确环境修正测定工作位置和其他指定位置的发射声压级 |
China National Standards pressure |
English PDF |
| GB/T 4974-2018 |
Air compressors,rock drilling machines and pneumatic tools—Preferred pressures 空压机、凿岩机械与气动工具 优先压力 |
China National Standards pressure |
English PDF |
| GB/T 20409-2018 |
Seamless multi-rifled steel tubes for high-pressure boiler 高压锅炉用内螺纹无缝钢管 |
China National Standards pressure |
English PDF |
| GB/T 35013-2018 |
Fitness-for-service assessment of pressure equipments 承压设备合于使用评价 |
China National Standards pressure |
English PDF |
| GB/T 35014-2018 |
Building construction machinery and equipment—Automatic pressure grouting machine for prestressing 建筑施工机械与设备 预应力用自动压浆机 |
China National Standards pressure |
English PDF |
| GB/T 36411-2018 |
Intelligent pressure instrument－General technical requirements 智能压力仪表 通用技术条件 |
China National Standards pressure |
English PDF |
| GB/T 12756-2018 |
Zinc-coated steel wire ropes for high-pressure rubber hose 高压胶管用镀锌钢丝绳 |
China National Standards pressure |
English PDF |
| GB/T 20441.2-2018 |
Electroacoustics—Measurement microphones—Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique 电声学 测量传声器 第2部分：采用互易技术对实验室标准传声器声压校准的原级方法 |
China National Standards pressure |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
