Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 46046-2025 |
road Construction and Maintenance Equipment - Asphalt Spreaders and Asphalt Gravel Spreaders/Spreaders - Terminology and Commercial Specifications {译} 道路施工与养护设备-沥青洒布机和沥青碎石同步洒/撒布机-术语和商业规格 |
China National Standards ro |
 English PDF |
| GB/T 46043-2025 |
Plastics - Recycled plastics - Guidelines for traceability and environmental assessment {译} 塑料-再生塑料-可追溯性和环境因素评估指南 |
China National Standards ro |
English PDF |
| GB/T 46027-2025 |
Greenhouse gases - Methods and requirements for quantifying product carbon footprints - Room air conditioners {译} 温室气体-产品碳足迹量化方法与要求-房间空调器 |
China National Standards ro |
English PDF |
| GB/T 46023.3-2025 |
Automotive smart photochromic glass - Part 3: Suspended particle dimming glass {译} 汽车用智能变色玻璃-第3部分：悬浮粒子调光玻璃 |
China National Standards ro |
English PDF |
| GB/T 46023.2-2025 |
Automotive smart photochromic glass - Part 2: Polymer dispersed liquid crystal dimming glass {译} 汽车用智能变色玻璃-第2部分：聚合物分散液晶调光玻璃 |
China National Standards ro |
English PDF |
| GB/T 46023.1-2025 |
Automotive Smart Photochromic Glass - Part 1: Part: Organic electrochromic glass {译} 汽车用智能变色玻璃-第1部分：有机电致变色玻璃 |
China National Standards ro |
English PDF |
| GB/T 46019.2-2025 |
Plastics - Identification of Recycled Plastic Components - Part 2: Polypropylene (PP) Materials {译} 塑料-再生塑料成分鉴别-第2部分：聚丙烯（PP）材料 |
China National Standards ro |
English PDF |
| GB/T 46018.2-2025 |
Plastics - Technical Specifications for Evaluation of Recycled Plastic Products - Part 2: Polystyrene (PS) Materials {译} 塑料-再生塑料产品评价技术规范-第2部分：聚苯乙烯（PS）材料 |
China National Standards ro |
English PDF |
| GB/T 46018.1-2025 |
Plastics - Technical Specifications for Evaluation of Recycled Plastic Products - Part 1: Polyethylene Terephthalate (PET) Materials {译} 塑料-再生塑料产品评价技术规范-第1部分：聚对苯二甲酸乙二醇酯（PET）材料 |
China National Standards ro |
English PDF |
| GB/T 46017-2025 |
Copper rods for Charging Pile Connectors {译} 充电桩连接器用铜棒 |
China National Standards ro |
English PDF |
| GB/T 46011.2-2025 |
road Vehicles - General Requirements for Greenhouse Gas Management - Part 2: Product Carbon Footprint Labeling {译} 道路车辆-温室气体管理通用要求-第2部分：产品碳足迹标识 |
China National Standards ro |
English PDF |
| GB/T 46011.1-2025 |
road Vehicles - General Requirements for Greenhouse Gas Management - Part 2 Part 1: Terms and Definitions {译} 道路车辆-温室气体管理通用要求-第1部分：术语和定义 |
China National Standards ro |
English PDF |
| GB/T 46007-2025 |
Procedures for Flower Grafting Propagation Technology {译} 花卉嫁接繁殖技术规程 |
China National Standards ro |
English PDF |
| GB/T 46005-2025 |
Operational Procedures for Clearing Pine Trees Infested with Insects {译} 松树病虫受害木清理作业规程 |
China National Standards ro |
English PDF |
| GB/T 46002-2025 |
Determination of Trypsin Inhibitor Activity in Soybeans and Their Processed Products for Animal Feed {译} 动物饲料大豆及其加工产品中胰蛋白酶抑制剂活性测定 |
China National Standards ro |
English PDF |
| GB/T 46000-2025 |
Water-Saving Enterprises - Wood Processing and Its Products Industry {译} 节水型企业-木材加工及其制品行业 |
China National Standards ro |
English PDF |
| GB/T 45999.2-2025 |
Dentistry - Dental Sintering Furnaces - Part 2: Test Methods for Sintering Furnace Program Design for Glazing Sintering Evaluation {译} 牙科学-牙科烧结炉-第2部分：上釉烧结评价烧结炉程序设计的测试方法 |
China National Standards ro |
English PDF |
| GB/T 45994-2025 |
Information Technology - Big Data - Cross-Domain Data Trusted Sharing Reference Architecture {译} 信息技术-大数据-跨域数据可信共享参考架构 |
China National Standards ro |
English PDF |
| GB/T 45992-2025 |
Collagen and Its Hydrolyzates {译} 胶原蛋白及其水解物 |
China National Standards ro |
English PDF |
| GB/T 45989-2025 |
Software Process Capability Maturity Model {译} 软件过程能力成熟度模型 |
China National Standards ro |
English PDF |
| GB/T 45987-2025 |
Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements Request for Reliability - Frame Replication and Elimination {译} 信息技术-系统间的远程通信和信息交换-局域网和城域网-特定要求-用于可靠性的帧复制和消除 |
China National Standards ro |
English PDF |
| GB/T 45982.3-2025 |
Microjoining of Second-Generation High-Temperature Superconductors - Part 3: Joint Test Methods {译} 第二代高温超导体微连接-第3部分：接头试验方法 |
China National Standards ro |
English PDF |
| GB/T 45982.2-2025 |
Microjoining of Second-Generation High-Temperature Superconductors - Part 2: Welding and Test Personnel Qualifications {译} 第二代高温超导体微连接-第2部分：焊接与试验人员资格 |
China National Standards ro |
English PDF |
| GB/T 45982.1-2025 |
Microjoining of Second-Generation High-Temperature Superconductors - Part 1: Process Requirements {译} 第二代高温超导体微连接-第1部分：工艺要求 |
China National Standards ro |
English PDF |
| GB/T 45978-2025 |
Pressure Levels and Temperature Types for Aerospace Hydraulic Systems {译} 航空航天液压系统压力级别和温度型别 |
China National Standards ro |
English PDF |
| GB/T 45976-2025 |
Aircraft - Environmental Testing of Airborne Fluid System Components - Flame Resistance in Designated Fire Zones {译} 飞机-机载流体系统部件的环境试验-指定火区的火焰耐受性 |
China National Standards ro |
English PDF |
| GB/T 45975-2025 |
Data Format for Terrestrial Ecological Meteorological Applications {译} 陆地生态气象应用数据格式 |
China National Standards ro |
English PDF |
| GB/T 45972-2025 |
Technical requirements for complete sets of equipment for the production of concrete panels for prefabricated buildings {译} 装配式建筑用混凝土板材生产成套装备技术要求 |
China National Standards ro |
English PDF |
| GB/T 45970-2025 |
Steel wire and its products - Zinc or zinc-aluminum alloy coatings {译} 钢丝及其制品-锌或锌铝合金镀层 |
China National Standards ro |
English PDF |
| GB/T 45967-2025 |
General method for determination of total carbon and total organic carbon content in inorganic chemical products {译} 无机化工产品中总碳和总有机碳含量测定通用方法 |
China National Standards ro |
English PDF |
| GB/T 45966.1-2025 |
Petroleum and natural gas industry - Well integrity - Part 1: Life cycle management {译} 石油天然气工业-井完整性-第-1-部分：生命周期管理 |
China National Standards ro |
English PDF |
| GB/T 45962-2025 |
Methods for testing performance of meteorological instruments and equipment - Atmospheric pressure {译} 气象仪器设备性能测试方法-大气压力 |
China National Standards ro |
English PDF |
| GB/T 45961-2025 |
General Technical Requirements for Meteorological Measurement Standards Temperature {译} 气象计量标准器通用技术要求-温度 |
China National Standards ro |
English PDF |
| GB/T 45956-2025 |
Meteorological Instrument and Equipment Performance Test Methods - Air Humidity {译} 气象仪器设备性能测试方法-空气湿度 |
China National Standards ro |
English PDF |
| GB/T 45955-2025 |
Meteorological Instrument and Equipment Performance Test Methods - Temperature {译} 气象仪器设备性能测试方法-温度 |
China National Standards ro |
English PDF |
| GB/T 45954-2025 |
General Technical Requirements for Meteorological Measurement Standards - Air Humidity {译} 气象计量标准器通用技术要求-空气湿度 |
China National Standards ro |
English PDF |
| GB/T 45951-2025 |
General Procedures for the Implementation of Permanent Exhibitions in Science and Technology Museums {译} 科技馆常设展览实施通用流程 |
China National Standards ro |
English PDF |
| GB/T 45950-2025 |
Fengyun-4 Meteorological Satellite Direct Broadcast High-Speed Information Transmission Protocol {译} 风云四号气象卫星直接广播高速信息传输协议 |
China National Standards ro |
English PDF |
| GB/T 45906.8-2025 |
Substation Secondary Systems - Part 8: Electrical Operation Error Prevention {译} 变电站二次系统-第8部分：电气操作防误 |
China National Standards ro |
English PDF |
| GB/T 45906.5-2025 |
Substation Secondary Systems - Part 5: Protection, Control, and Related Equipment {译} 变电站二次系统-第5部分：保护控制及相关设备 |
China National Standards ro |
English PDF |
| GB/T 45906.4-2025 |
Substation Secondary Systems - Part 4: Network Security Protection {译} 变电站二次系统-第4部分：网络安全防护 |
China National Standards ro |
English PDF |
| GB/T 45905.3-2025 |
Electricity spot market operations - Part 3: Interprovincial technical support system {译} 电力现货市场运营-第3部分：省间技术支持系统 |
China National Standards ro |
English PDF |
| GB/T 45905.2-2025 |
Electricity spot market operations - Part 2: Provincial technical support system {译} 电力现货市场运营-第2部分：省级技术支持系统 |
China National Standards ro |
English PDF |
| GB/T 45869-2025 |
Technical Guide for Online Monitoring of Carbon Emissions from Boilers {译} 锅炉碳排放在线监测技术指南 |
China National Standards ro |
English PDF |
| GB/T 45866-2025 |
Earth-Moving Machinery - Layered Software Architecture for Machine Control Systems - General Requirements {译} 土方机械-机器控制系统分层式软件架构-通用要求 |
China National Standards ro |
English PDF |
| GB/T 45863-2025 |
Test Conditions for CNC Vertical External Broaching Machines - Accuracy Tests {译} 数控立式外拉床检验条件-精度检验 |
China National Standards ro |
English PDF |
| GB/T 45862-2025 |
Testing and Calculation Methods for Carbon Emissions from Boilers {译} 锅炉碳排放测试与计算方法 |
China National Standards ro |
English PDF |
| GB/T 45859-2025 |
Wear-Resistant Cast Iron - Classification {译} 耐磨铸铁-分类 |
China National Standards ro |
English PDF |
| GB/T 45858-2025 |
Additive Manufacturing - Cold Spray Process Specifications {译} 增材制造-冷喷涂工艺规范 |
China National Standards ro |
English PDF |
| GB/T 45857-2025 |
Flux-Cored Wire for Gas Electro-Mechanical Welding {译} 气电焊用药芯焊丝 |
China National Standards ro |
English PDF |
| GB/T 45855-2025 |
Wind Power Generation Systems - Technical Specifications for Life Cycle Environmental Assessment of Wind Turbines {译} 风能发电系统-风力发电机组生命周期环境评价技术规范 |
China National Standards ro |
English PDF |
| GB/T 45816-2025 |
road Vehicles - Refrigerant Systems for Automotive Air Conditioning Systems - Safety Requirements {译} 道路车辆-汽车空调系统用制冷剂系统-安全要求 |
China National Standards ro |
English PDF |
| GB/T 45798-2025 |
Optoelectronic Measurements - Laser Tracking Measurement System Performance Test Methods {译} 光电测量-激光跟踪测量系统性能检测方法 |
China National Standards ro |
English PDF |
| GB/T 45797-2025 |
road Vehicles - Performance Requirements and Test Methods for Low-Voltage Electrical Systems {译} 道路车辆-低压电气系统性能要求及试验方法 |
China National Standards ro |
English PDF |
| GB/T 45703-2025 |
Consumer Privacy Protection in Product and Service Design - High-Level Requirements {译} 产品和服务设计中的消费者隐私保护-高阶要求 |
China National Standards ro |
English PDF |
| GB/T 45505.5-2025 |
Test Methods for Glass Substrates for Flat Panel Displays - Part 5: Optoelectronic Properties {译} 平板显示器基板玻璃测试方法-第5部分：光电性能 |
China National Standards ro |
English PDF |
| GB/T 45505.3-2025 |
Test Methods for Glass Substrates for Flat Panel Displays - Part 3: Thermal Properties {译} 平板显示器基板玻璃测试方法-第3部分：热学性能 |
China National Standards ro |
English PDF |
| GB/T 45505.2-2025 |
Test Methods for Glass Substrates for Flat Panel Displays - Part 2: Surface Properties {译} 平板显示器基板玻璃测试方法-第2部分：表面性能 |
China National Standards ro |
English PDF |
| GB/T 45159.6-2025 |
Mechanical Vibration and Shock - Characterization of Dynamic Mechanical Properties of Viscoelastic Materials - Part 6: Time-Temperature Superposition {译} 机械振动与冲击-黏弹性材料动态力学性能的表征-第6部分：时温叠加 |
China National Standards ro |
English PDF |
| GB/T 45159.5-2025 |
Mechanical Vibration and Shock - Characterization of Dynamic Mechanical Properties of Viscoelastic Materials - Part 5: Poisson's Ratio Based on Comparison of Measurement and Finite Element Analysis {译} 机械振动与冲击-黏弹性材料动态力学性能的表征-第5部分：基于测量和有限元分析比较的泊松比 |
China National Standards ro |
English PDF |
| GB/T 45159.4-2025 |
Mechanical Vibration and Shock - Characterization of Dynamic Mechanical Properties of Viscoelastic Materials - Part 4: Dynamic Stiffness Method {译} 机械振动与冲击-黏弹性材料动态力学性能的表征-第4部分：动刚度法 |
China National Standards ro |
English PDF |
| GB/T 43683.3-2025 |
Hydrogenerator unit installation procedures and public Differential Guidelines - Part 3: Vertical Francis Turbine or Pump-Turbine {译} 水轮发电机组安装程序与公差导则-第3部分：立式混流式水轮机或水泵水轮机 |
China National Standards ro |
English PDF |
| GB/T 41762.1-2025 |
Fiber-reinforced plastic composites - Determination of through-thickness properties of laminates - Part 1: Direct tension and compression tests {译} 纤维增强塑料复合材料-层合板厚度方向性能的测定-第1部分：直接拉伸和压缩试验 |
China National Standards ro |
English PDF |
| GB/T 41270.3-2025 |
Avionics process management - Atmospheric radiation effects - Part 3: System design optimization considering single-event effects (SEE) of atmospheric radiation {译} 航空电子过程管理-大气辐射影响-第3部分：考虑大气辐射单粒子效应（SEE）的系统设计优化 |
China National Standards ro |
English PDF |
| GB/T 38278.3-2025 |
Technical requirements for holographic anti-counterfeiting products - Part 3: Anti-counterfeiting holographic hot stamping foil {译} 全息防伪产品技术条件-第3部分：防伪全息烫印箔 |
China National Standards ro |
English PDF |
| GB/T 38278.2-2025 |
Technical requirements for holographic anti-counterfeiting products - Part 2: Anti-counterfeiting holographic paper {译} 全息防伪产品技术条件-第2部分：防伪全息纸 |
China National Standards ro |
English PDF |
| GB/T 37946.2-2025 |
Test methods for organic luminescent materials - Part 2: Thermal properties {译} 有机发光材料测试方法-第2部分：热学性能 |
China National Standards ro |
English PDF |
| GB/T 35206-2025 |
Thin section identification of shale and mudstone rocks {译} 页岩和泥岩岩石薄片鉴定 |
China National Standards ro |
English PDF |
| GB/T 35205.4-2025 |
rough terrain forklifts - Safety requirements and verification - Part 4: Additional requirements for telescopic forklifts carrying freely swinging loads {译} 越野叉车-安全要求及验证-第4部分：吊运可自由摆动载荷的伸缩臂式叉车的附加要求 |
China National Standards ro |
English PDF |
| GB/T 34399-2025 |
Verification of temperature control facilities and equipment for cold chain logistics of pharmaceutical products - Technical specification for performance confirmation {译} 医药产品冷链物流温控设施设备验证-性能确认技术规范 |
China National Standards ro |
English PDF |
| GB/T 34333-2025 |
Refractory materials - Chemical analysis method using inductively coupled plasma atomic emission spectroscopy (ICP-AES) {译} 耐火材料-电感耦合等离子体原子发射光谱（ICP-AES）化学分析方法 |
China National Standards ro |
English PDF |
| GB/T 34219-2025 |
Refractory materials - Test method for tensile strength at room temperature {译} 耐火材料-常温抗拉强度试验方法 |
China National Standards ro |
English PDF |
| GB/T 33014.4-2025 |
road Vehicles - Test Methods for Immunity of Electrical/Electronic Components to Narrowband Radiated Electromagnetic Energy - Part 4: Wire Beam Excitation Method {译} 道路车辆-电气/电子部件对窄带辐射电磁能的抗扰性试验方法-第4部分：线束激励法 |
China National Standards ro |
English PDF |
| GB/T 33014.2-2025 |
road Vehicles - Test Methods for Immunity of Electrical/Electronic Components to Narrowband Radiated Electromagnetic Energy - Part 2: Anechoic Chamber Method {译} 道路车辆-电气/电子部件对窄带辐射电磁能的抗扰性试验方法-第2部分：电波暗室法 |
China National Standards ro |
English PDF |
| GB/T 33012.4-2025 |
road Vehicles - Test Methods for Immunity of Vehicles to Narrowband Radiated Electromagnetic Energy - Part 4: Wire Beam Excitation Method {译} 道路车辆-车辆对窄带辐射电磁能的抗扰性试验方法-第4部分：线束激励法 |
China National Standards ro |
English PDF |
| GB/T 31281-2025 |
Brand Value Evaluation - Petroleum and Chemical Industry {译} 品牌价值评价-石油和化学工业 |
China National Standards ro |
English PDF |
| GB/T 31080-2025 |
Service Specifications for Cold Chain Logistics of Aquatic Products {译} 水产品冷链物流服务规范 |
China National Standards ro |
English PDF |
| GB/T 30868-2025 |
Microtube Density Test Method for Silicon Carbide Single Wafers {译} 碳化硅单晶片微管密度测试方法 |
China National Standards ro |
English PDF |
| GB/T 30104.222-2025 |
Digital Addressable Lighting Interface - Part 222: Particular Requirements for Control Gear - Heat Lamp Protection (Equipment Type 21) {译} 数字可寻址照明接口-第222部分：控制装置的特殊要求-热灯保护（设备类型21） |
China National Standards ro |
English PDF |
| GB/T 30104.220-2025 |
Digital Addressable Lighting Interface - Part 220: Particular Requirements for Control Gear - Central Power Supply Emergency Operation (Equipment Type 19) {译} 数字可寻址照明接口-第220部分：控制装置的特殊要求-中央供电应急操作（设备类型19） |
China National Standards ro |
English PDF |
| GB/T 30104.207-2025 |
Digital addressable lighting interface - Part 207: Particular requirements for control devices LED Module (Equipment Type 6) {译} 数字可寻址照明接口-第207部分：控制装置的特殊要求-LED模块（设备类型6） |
China National Standards ro |
English PDF |
| GB/T 30104.102-2025 |
Digital addressable lighting interface - Part 102: General requirements - Control devices {译} 数字可寻址照明接口-第102部分：一般要求-控制装置 |
China National Standards ro |
English PDF |
| GB/T 29846-2025 |
Photoimageable electroplating resist for printed circuit boards {译} 印制板用光成像耐电镀抗蚀剂 |
China National Standards ro |
English PDF |
| GB/T 28859-2025 |
Epoxy powder encapsulant for electronic packaging {译} 电子封装用环氧粉末包封料 |
China National Standards ro |
English PDF |
| GB/T 28729-2025 |
Nitrous oxide {译} 一氧化二氮 |
China National Standards ro |
English PDF |
| GB/T 27043-2025 |
Conformity assessment - General requirements for the competence of proficiency testing providers {译} 合格评定-能力验证提供者能力的通用要求 |
China National Standards ro |
English PDF |
| GB/T 25396.2-2025 |
Agricultural Machinery - Throwable Object Test and Acceptance Specifications - Part 2: Flail mower {译} 农业机械-抛出物试验和验收规范-第2部分：甩刀式割草机 |
China National Standards ro |
English PDF |
| GB/T 25396.1-2025 |
Agricultural Machinery - Throwable Object Test and Acceptance Specifications - Part 1: Rotary Mowers {译} 农业机械-抛出物试验和验收规范-第1部分：旋转式割草机 |
China National Standards ro |
English PDF |
| GB/T 24504-2025 |
Injection/Pressure Dropout Test Methods for Coalbed Methane Wells {译} 煤层气井注入/压降试井方法 |
China National Standards ro |
English PDF |
| GB/T 23440-2025 |
Inorganic Waterproofing and Sealing Materials {译} 无机防水堵漏材料 |
China National Standards ro |
English PDF |
| GB/T 22118-2025 |
Guidelines for the Collection, Processing, and Provision of Enterprise Credit Information {译} 企业信用信息采集、处理和提供指南 |
China National Standards ro |
English PDF |
| GB/T 22040-2025 |
Weathering Resistance Requirements and Test Methods for Plastic Products Along Highway Facilities {译} 公路沿线设施塑料制品耐候性要求及测试方法 |
China National Standards ro |
English PDF |
| GB/T 21108-2025 |
Determination of Chloramphenicol, Thiamphenicol, and Florfenicol in Feeds - High Performance Liquid Chromatography-Tandem Mass Spectrometry {译} 饲料中氯霉素、甲砜霉素和氟苯尼考的测定-高效液相色谱-串联质谱法 |
China National Standards ro |
English PDF |
| GB/T 20833.2-2025 |
rotating Electrical Machines - Winding Insulation - Part 2: Online Partial Discharge Measurement of Stator Winding Insulation {译} 旋转电机-绕组绝缘-第2部分：定子绕组绝缘在线局部放电测量 |
China National Standards ro |
English PDF |
| GB/T 20716.2-2025 |
road Vehicles - Electrical Connectors (7-Pin) Between Tractors and Trailers - Part 2: Braking and Running System Connections for Vehicles with a 12-V Nominal Voltage {译} 道路车辆-牵引车和挂车之间的电连接器（7芯）第2部分：12-V标称电压车辆的制动系统和行走系的连接 |
China National Standards ro |
English PDF |
| GB/T 20716.1-2025 |
road Vehicles - Electrical Connectors (7-Pin) Between Tractors and Trailers - Part 1: Braking and Running System Connections for Vehicles with a 24-V Nominal Voltage {译} 道路车辆-牵引车和挂车之间的电连接器（7芯）第1部分：24-V标称电压车辆的制动系统和行走系的连接 |
China National Standards ro |
English PDF |
| GB/T 20644.2-2025 |
Special Environmental Conditions - Selection Guidelines - Part 2: Polymer Materials {译} 特殊环境条件-选用导则-第2部分：高分子材料 |
China National Standards ro |
English PDF |
| GB/T 20644.1-2025 |
Special Environmental Conditions - Selection Guidelines - Part 1: Metal Surface Protection {译} 特殊环境条件-选用导则-第1部分：金属表面防护 |
China National Standards ro |
English PDF |
| GB/T 20643.3-2025 |
Special environmental conditions - Environmental test methods - Part 3: Artificial Simulation Test Methods and Guidelines - Polymer Materials {译} 特殊环境条件-环境试验方法-第3部分：人工模拟试验方法及导则-高分子材料 |
China National Standards ro |
English PDF |
| GB/T 20643.2-2025 |
Special environmental conditions - Environmental test methods - Part 2: Artificial simulation test methods and guidelines - Electrical and electronic products (including communications products) {译} 特殊环境条件-环境试验方法-第2部分：人工模拟试验方法及导则-电工电子产品（含通信产品） |
China National Standards ro |
English PDF |
| GB/T 20643.1-2025 |
Special environmental conditions - Environmental test methods - Part 1: General {译} 特殊环境条件-环境试验方法-第1部分：总则 |
China National Standards ro |
English PDF |
| GB/T 20222-2025 |
General technical requirements for anti-copying technology products {译} 防复印技术产品通用技术条件 |
China National Standards ro |
English PDF |
| GB/T 19771-2025 |
Network security technology - Public key infrastructure - Minimum interoperability specifications for PKI components {译} 网络安全技术-公钥基础设施-PKI组件最小互操作规范 |
China National Standards ro |
English PDF |
| GB/T 19714-2025 |
Network security technology - Public key infrastructure - Certificate management protocol {译} 网络安全技术-公钥基础设施-证书管理协议 |
China National Standards ro |
English PDF |
| GB/T 19626-2025 |
General technical requirements for DNA anti-counterfeiting technology products {译} DNA防伪技术产品通用技术要求 |
China National Standards ro |
English PDF |
| GB/T 19542-2025 |
Determination of Sulfonamides in Feed - Liquid Chromatography - Tandem Mass spectrometry {译} 饲料中磺胺类药物的测定-液相色谱-串联质谱法 |
China National Standards ro |
English PDF |
| GB/T 19042.2-2025 |
Evaluation and routine Testing in Medical Imaging Departments - Part 3-2: Acceptance Tests for Imaging Performance of Mammographic X-ray Equipment {译} 医用成像部门的评价及例行试验-第3-2部分：乳腺摄影X射线设备成像性能验收试验 |
China National Standards ro |
English PDF |
| GB/T 18758-2025 |
General Technical Requirements for Particle Track Anti-Counterfeiting Technology Products {译} 粒子径迹防伪技术产品通用技术条件 |
China National Standards ro |
English PDF |
| GB/T 18444-2025 |
Imaging Materials - Processed Safety Photographic Film - Storage Procedures {译} 影像材料-已加工安全照相胶片-贮存规程 |
China National Standards ro |
English PDF |
| GB/T 18277-2025 |
Toll Collection Systems and Collection Methods for Toll roads {译} 收费公路收费制式和收费方式 |
China National Standards ro |
English PDF |
| GB/T 18268.22-2025 |
Electrical Equipment for Measurement, Control, and Laboratory Use - Electromagnetic Compatibility Requirements - Part 22: Particular Requirements - Test Configuration, Operating Conditions, and Performance Criteria for Portable Test, Measuring, and Monito {译} 测量、控制和实验室用的电设备-电磁兼容性要求-第22部分：特殊要求-低压配电系统用便携式试验、测量和监控设备的试验配置、工作条件和性能判据 |
China National Standards ro |
English PDF |
| GB/T 18117-2025 |
Photography - Processed Photographic Color Film and Paper - Test Methods for Image Stability {译} 照相-已加工照相彩色胶片和相纸照片-影像稳定性试验方法 |
China National Standards ro |
English PDF |
| GB/T 18114.8-2025 |
Chemical analysis methods for rare earth concentrates - Part 8: Determination of rare earth oxide content and proportioning ratio {译} 稀土精矿化学分析方法-第8部分：稀土氧化物含量和配分量的测定 |
China National Standards ro |
English PDF |
| GB/T 17811-2025 |
Determination of pepsin digestibility of animal-derived protein feeds - Filtration method {译} 动物源性蛋白质饲料胃蛋白酶消化率的测定-过滤法 |
China National Standards ro |
English PDF |
| GB/T 16942-2025 |
Electronic gases - Bulk gases {译} 电子气体-大宗气体 |
China National Standards ro |
English PDF |
| GB/T 16124-2025 |
Technical specifications for environmental health impact assessment of water conservancy and hydropower projects {译} 水利水电工程环境健康影响评价技术规范 |
China National Standards ro |
English PDF |
| GB/T 15171-2025 |
Test methods for sealing properties of packaging {译} 包装件密封性能试验方法 |
China National Standards ro |
English PDF |
| GB/T 14794-2025 |
Steam Reciprocating pumps {译} 蒸汽往复泵 |
China National Standards ro |
English PDF |
| GB/T 14603-2025 |
Electronic Gases - Halide Gases {译} 电子气体-卤化物气体 |
China National Standards ro |
English PDF |
| GB/T 14491-2025 |
Propylene Oxide for Industrial Use {译} 工业用环氧丙烷 |
China National Standards ro |
English PDF |
| GB/T 14447-2025 |
Test Methods for the Electrostatic Properties of Plastic Films - Half-Life Method {译} 塑料薄膜静电性测试方法-半衰期法 |
China National Standards ro |
English PDF |
| GB/T 14307-2025 |
Methods for Measuring the Performance of Non-Broadcast Videotapes {译} 非广播录像磁带性能测量方法 |
China National Standards ro |
English PDF |
| GB/T 14257-2025 |
Product Barcodes - Requirements for Barcode Symbol Placement {译} 商品条码-条码符号放置要求 |
China National Standards ro |
English PDF |
| GB/T 14092.4-2025 |
Environmental Conditions for Mechanical Products - Part 4: Marine {译} 机械产品环境条件-第4部分：海洋 |
China National Standards ro |
English PDF |
| GB/T 13790-2025 |
Cold-rolled Low-Carbon Steel Sheet and Strip for Enameling {译} 搪瓷用冷轧低碳钢板及钢带 |
China National Standards ro |
English PDF |
| GB/T 12690.11-2025 |
Chemical Analysis Methods for Non-Rare Earth Impurities in Rare Earth Metals and Their Oxides - Part 11: Determination of Magnesium Content - Flame Atomic Absorption Spectrometry {译} 稀土金属及其氧化物中非稀土杂质化学分析方法-第11部分：镁含量的测定-火焰原子吸收光谱法 |
China National Standards ro |
English PDF |
| GB/T 11633-2025 |
General Technical Specifications for Centralized Control Consoles in Ship Engine Rooms Technical Requirements {译} 船舶机舱集中控制台通用技术条件 |
China National Standards ro |
English PDF |
| GB/T 10593.5-2025 |
Methods for Measurement of Environmental Parameters for Electrical and Electronic Products - Part 5: Corrosive Gases {译} 电工电子产品环境参数测量方法-第5部分：腐蚀性气体 |
China National Standards ro |
English PDF |
| GB/T 10593.4-2025 |
Methods for Measurement of Environmental Parameters for Electrical and Electronic Products - Part 4: Condensation {译} 电工电子产品环境参数测量方法-第4部分：凝露 |
China National Standards ro |
English PDF |
| GB/T 10357.7-2025 |
Furniture Mechanical Properties Tests - Part 7: Stability of Tables {译} 家具力学性能试验-第7部分：桌类稳定性 |
China National Standards ro |
English PDF |
| GB/T 10357.3-2025 |
Furniture Mechanical Properties Tests - Part 3: Strength and Durability of Chairs and Stools {译} 家具力学性能试验-第3部分：椅凳类强度和耐久性 |
China National Standards ro |
English PDF |
| GB/T 10267.1-2025 |
Analysis Methods for Calcium Metal - Part 1: Determination of Chloride by Chloride Ion Selective Electrode {译} 金属钙分析方法-第1部分：氯离子选择性电极法测定氯 |
China National Standards ro |
English PDF |
| GB/T 9258.3-2025 |
Abrasives for coated abrasives - Testing and marking of particle size composition - Part 3: Micropowder P240-P5000 {译} 涂附磨具用磨料-粒度组成的检测和标记-第3部分：微粉P240～P5000 |
China National Standards ro |
English PDF |
| GB/T 9239.11-2025 |
Mechanical vibration - rotor balancing - Part 11: Balancing methods and tolerances for rigid rotors {译} 机械振动-转子平衡-第11部分：刚性转子的平衡方法和允差 |
China National Standards ro |
English PDF |
| GB/T 8223.2-2025 |
Value engineering - Part 2: General working procedures {译} 价值工程-第2部分：通用工作程序 |
China National Standards ro |
English PDF |
| GB/T 7251.10-2025 |
Low-voltage Switchgear and Controlgear Assemblies - Part 10: Guidelines for specifying assemblies {译} 低压成套开关设备和控制设备-第10部分：规定成套设备的指南 |
China National Standards ro |
English PDF |
| GB/T 7251.7-2025 |
Low-voltage Switchgear and Controlgear Assemblies - Part 7: Assemblies for specific applications such as docks, campsites, market squares, and electric vehicle charging stations {译} 低压成套开关设备和控制设备-第7部分：码头、露营地、市集广场、电动车辆充电站等特定应用的成套设备 |
China National Standards ro |
English PDF |
| GB/T 7247.14-2025 |
Laser Product Safety - Part 14: User Guide {译} 激光产品的安全-第14部分：用户指南 |
China National Standards ro |
English PDF |
| GB/T 7247.8-2025 |
Laser Product Safety - Part 8: Guidelines for the safe use of lasers directed at humans {译} 激光产品的安全-第8部分：作用于人的激光安全使用指南 |
China National Standards ro |
English PDF |
| GB/T 7031-2025 |
Mechanical vibration - road pavement spectrum - Measurement data According to the report {译} 机械振动-道路路面谱-测量数据的报告 |
China National Standards ro |
English PDF |
| GB/T 5463.3-2025 |
Non-metallic mineral product vocabulary - Part 3: Gypsum {译} 非金属矿产品词汇-第3部分：石膏 |
China National Standards ro |
English PDF |
| GB/T 5463.1-2025 |
Non-metallic mineral product vocabulary - Part 1: General terms and definitions {译} 非金属矿产品词汇-第1部分：通用术语和定义 |
China National Standards ro |
English PDF |
| GB/T 4772.1-2025 |
Dimensions and output power ratings of rotating electrical machines - Part 1: Frame sizes 56 to 400 and flange sizes 55 to 1080 {译} 旋转电机尺寸和输出功率等级-第1部分:机座号56～400和凸缘号55～1080 |
China National Standards ro |
English PDF |
| GB/T 4699.2-2025 |
Ferrochrome, silicon-chromium alloys, ferrochrome nitride, and high-nitrogen ferrochrome - Determination of chromium content - Ammonium persulfate oxidation titration and potentiometric titration {译} 铬铁、硅铬合金、氮化铬铁和高氮铬铁-铬含量的测定-过硫酸铵氧化滴定法和电位滴定法 |
China National Standards ro |
English PDF |
| GB/T 4300-2025 |
Ships and marine technology - Marine gyrocompasses {译} 船舶与海洋技术-船用陀螺罗经 |
China National Standards ro |
English PDF |
| GB/T 4130.1-2025 |
Acoustics - Calibration of hydrophones - Part 1: Free-field calibration method {译} 声学-水听器校准-第1部分：自由场校准方法 |
China National Standards ro |
English PDF |
| GB/T 3871.4-2025 |
Agricultural tractors - Test procedures - Part 4: Lifting capacity of rear three-point hitch systems {译} 农业拖拉机-试验规程-第4部分：后置三点悬挂装置提升能力 |
China National Standards ro |
English PDF |
| GB/T 3864-2025 |
Industrial nitrogen {译} 工业氮 |
China National Standards ro |
English PDF |
| GB/T 3780.31-2025 |
Carbon black - Part 31: Determination of total hydrogen content {译} 炭黑-第31部分：总氢元素含量的测定 |
China National Standards ro |
English PDF |
| GB/T 3672.2-2025 |
Tolerances for rubber products - Part 2: Geometrical tolerances {译} 橡胶制品的公差-第2部分：几何公差 |
China National Standards ro |
English PDF |
| GB/T 3672.1-2025 |
Tolerances for rubber products - Part 1: Dimensional tolerances {译} 橡胶制品的公差-第1部分：尺寸公差 |
China National Standards ro |
English PDF |
| GB/T 3475-2025 |
Technical requirements and test methods for speed control systems of marine diesel engines {译} 船用柴油机调速系统技术要求和试验方法 |
China National Standards ro |
English PDF |
| GB/T 3051-2025 |
General method for determination of chloride content in inorganic chemical products - Mercuriometric method and ion chromatography {译} 无机化工产品中氯化物含量测定的通用方法-汞量法和离子色谱法 |
China National Standards ro |
English PDF |
| GB/T 2900.73-2025 |
Electrical terminology - Part 73: Grounding and protection against electric shock {译} 电工术语-第73部分：接地与电击防护 |
China National Standards ro |
English PDF |
| GB/T 2423.66-2025 |
Environmental Testing - Part 2: Test Methods - Test: Temperature/Humidity/Static Load Combination {译} 环境试验-第2部分：试验方法-试验：温度/湿度/静负载综合 |
China National Standards ro |
English PDF |
| GB/T 2423.50-2025 |
Environmental Testing - Part 2: Test Methods - Test Cy: Steady Damp Heat, Mainly Used for Accelerated Testing of Components {译} 环境试验-第2部分：试验方法-试验Cy：恒定湿热主要用于元件的加速试验 |
China National Standards ro |
English PDF |
| GB/T 2423.21-2025 |
Environmental Testing - Part 2: Test Methods - Test M: Low Pressure {译} 环境试验-第2部分：试验方法-试验M：低气压 |
China National Standards ro |
English PDF |
| GB/T 1859.4-2025 |
Reciprocating Internal Combustion Engines - Determination of Sound Power Levels by Sound Pressure Method - Part 4: Simple Field Measurement Method {译} 往复式内燃机-声压法声功率级的测定-第4部分:现场测量简易法 |
China National Standards ro |
English PDF |
| GB/T 755-2025 |
rotating Electrical Machines - Ratings and Performance {译} 旋转电机-定额与性能 |
China National Standards ro |
English PDF |
| GB/T 713.8-2025 |
Steel Plates and Strips for Pressure Equipment - Part 8: Homogeneous and Heterogeneous Rolled Composite Steel Plates {译} 承压设备用钢板和钢带-第8部分：同质和异质轧制复合钢板 |
China National Standards ro |
English PDF |
| GB 46040-2025 |
Limits of Leachable Harmful Metal Elements from Wall Materials {译} 墙体材料可浸出有害金属元素限值 |
China National Standards ro |
English PDF |
| GB 46037-2025 |
Special Processing Machine Tools - Safety Technical Requirements {译} 特种加工机床-安全技术要求 |
China National Standards ro |
English PDF |
| GB 46036-2025 |
Safety Precautions - Transparent Protective Materials {译} 安全防范-透明防护材料 |
China National Standards ro |
English PDF |
| GB 46033-2025 |
Safety Operating Procedures for Grain Warehouses {译} 粮食仓库安全操作规程 |
China National Standards ro |
English PDF |
| GB 46031-2025 |
Technical Specifications for Explosion-Proofing Systems for Combustible Dust Processes {译} 可燃粉尘工艺系统防爆技术规范 |
China National Standards ro |
English PDF |
| GB 46029-2025 |
Energy Consumption Limits per Unit Product for Formaldehyde {译} 甲醛单位产品能源消耗限额 |
China National Standards ro |
English PDF |
| GB 45944-2025 |
Perfluorohexanone Fire Extinguishing Agent {译} 全氟己酮灭火剂 |
China National Standards ro |
English PDF |
| GB 30080-2025 |
Safety Design and Production Specifications for Copper and Copper Alloy Casting {译} 铜及铜合金熔铸安全设计与生产规范 |
China National Standards ro |
English PDF |
| GB 29741-2025 |
Safety Specifications for Aluminum Electrolysis {译} 铝电解安全生产规范 |
China National Standards ro |
English PDF |
| GB 29445-2025 |
Energy Consumption Limits per Unit Product in Coal Mining {译} 煤炭开采单位产品能源消耗限额 |
China National Standards ro |
English PDF |
| GB 26572-2025 |
Requirements for the Restriction of Hazardous Substances in Electrical and Electronic Products {译} 电器电子产品有害物质限制使用要求 |
China National Standards ro |
English PDF |
| GB 23101.2-2025 |
Surgical Implants - Hydroxyapatite - Part 2: Hydroxyapatite Thermal Spray Coatings {译} 外科植入物-羟基磷灰石-第2部分：羟基磷灰石热喷涂涂层 |
China National Standards ro |
English PDF |
| GB 22448-2025 |
Nondestructive Testing Instruments - Protection Rules for Industrial X-ray Flaw Detectors Below 500kV {译} 无损检测仪器-500kV以下工业X射线探伤机防护规则 |
China National Standards ro |
English PDF |
| GB 19157-2025 |
Remote Fire Protection General Technical Requirements for Gun Systems {译} 远控消防炮系统通用技术条件 |
China National Standards ro |
English PDF |
| GB 16808-2025 |
Combustible Gas Alarm Controllers {译} 可燃气体报警控制器 |
China National Standards ro |
English PDF |
| GB 15760-2025 |
Metal Cutting Machine Tools - General Technical Specifications for Safety Protection {译} 金属切削机床-安全防护通用技术规范 |
China National Standards ro |
English PDF |
| GB 45841-2025 |
Emission Limits and Measurement Methods for Exhaust Pollutants from Railway Diesel Locomotives and Their Engines (China Phase I) {译} 铁路内燃机车及其发动机排气污染物排放限值及测量方法（中国第一阶段） |
China National Standards ro |
English PDF |
| GB 31420-2025 |
Requirements for Toxic, Hazardous, and Restricted Substances in Personal Protective Equipment {译} 个体防护装备有毒有害及限量物质要求 |
China National Standards ro |
English PDF |
| GB 39800.11-2025 |
Personal Protective Equipment Specifications - Part 11: Subways {译} 个体防护装备配备规范-第11部分：地铁 |
China National Standards ro |
English PDF |
| GB 39800.12-2025 |
Personal Protective Equipment Specifications - Part 12: Buildings {译} 个体防护装备配备规范-第12部分：建筑 |
China National Standards ro |
English PDF |
| GB 39800.10-2025 |
Personal Protective Equipment Specifications - Part 10: Machinery {译} 个体防护装备配备规范-第10部分：机械 |
China National Standards ro |
English PDF |
| GB 32028-2025 |
Energy Efficiency Limits and Energy Efficiency Grades for Projectors {译} 投影机能效限定值及能效等级 |
China National Standards ro |
English PDF |
| GB 5768.9-2025 |
road Traffic Signs and Markings - Part 9: Traffic Accident Management Areas {译} 道路交通标志和标线-第9部分：交通事故管理区 |
China National Standards ro |
English PDF |
| GB 7300.306-2025 |
Feed Additives - Part 3: Mineral Elements and Their Complexes (Chelates) - Chromium Nicotinate {译} 饲料添加剂-第3部分：矿物元素及其络（螯）合物-烟酸铬 |
China National Standards ro |
English PDF |
| GB 7300.505-2025 |
Feed Additives - Part 5: Microorganisms - Bacillus Coagulans {译} 饲料添加剂-第5部分：微生物-凝结芽孢杆菌 |
China National Standards ro |
English PDF |
| GB 21256-2025 |
Energy Consumption Limits per Unit Product for Major Processes in Crude Steel Production {译} 粗钢生产主要工序单位产品能源消耗限额 |
China National Standards ro |
English PDF |
| GB 5768.2-2022 |
road Traffic Signs and Markings - Part 2: Road Traffic Signs {译} 道路交通标志和标线-第2部分：道路交通标志 |
China National Standards ro |
English PDF |
| GB/T 45946-2025 |
Microcrystalline Panels for Household and Similar Electrical Appliances {译} 家用和类似用途电器用微晶面板 |
China National Standards ro |
English PDF |
| GB/T 45936-2025 |
Emergency Management - Specifications for Data Transmission Interfaces and Communication Protocols for Applications of the Beidou Satellite Navigation System {译} 应急管理-北斗卫星导航系统应用数据传输接口和通信协议规范 |
China National Standards ro |
English PDF |
| GB/T 45932-2025 |
Common Technical Requirements for High-Voltage DC Switchgear and Control Equipment Standards {译} 高压直流开关设备和控制设备标准的共用技术要求 |
China National Standards ro |
English PDF |
| GB/T 45931-2025 |
Recycled Aggregates and Inorganic Mixtures from Construction Waste for Highway Use {译} 公路用建筑垃圾再生集料及无机混合料 |
China National Standards ro |
English PDF |
| GB/T 45930-2025 |
Ski Resort Equipment - Snow Grooming - Technical Specifications {译} 雪场装备-压雪机-技术条件 |
China National Standards ro |
English PDF |
| GB/T 45925-2025 |
Millimeter-Wave Signal Amplification Strong Glass {译} 毫米波信号增强玻璃 |
China National Standards ro |
English PDF |
| GB/T 45921-2025 |
Organic Electrochromic Laminated Glass for Architectural Use {译} 建筑用有机电致变色夹层玻璃 |
China National Standards ro |
English PDF |
| GB/T 20175-2025 |
Surface Chemical Analysis - Sputtering Depth Profiling - Optimization Method Using Layered Film Systems as Reference Materials {译} 表面化学分析-溅射深度剖析-用层状膜系为参考物质的优化方法 |
China National Standards ro |
English PDF |
| GB/T 16267-2025 |
Test Methods for Packaging Materials - Vapor-Phase Corrosion Inhibition {译} 包装材料试验方法-气相缓蚀能力 |
China National Standards ro |
English PDF |
| GB/T 14099.7-2025 |
Gas Turbines - Procurement - Part 7: Technical Information {译} 燃气轮机-采购-第7部分：技术信息 |
China National Standards ro |
English PDF |
| GB/T 13814-2025 |
Nickel and Nickel Alloy Welding rods {译} 镍及镍合金焊条 |
China National Standards ro |
English PDF |
| GB/T 30658-2025 |
Prosthetics and Orthotics - Factors Considered in Prescribing Lower Limb Prostheses {译} 假肢和矫形器-开具下肢假肢处方考虑的因素 |
China National Standards ro |
English PDF |
| GB/T 4127.14-2025 |
Bonded Abrasives - Dimensions - Part 14: Deburring, roughing, and Grinding Wheels for Angle Grinders {译} 固结磨具-尺寸-第14部分：角向砂轮机用去毛刺、荒磨和粗磨砂轮 |
China National Standards ro |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
