Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43626-2023 |
Safety regulations for semi-integrated LED lamps with power supply voltage not greater than AC rms 50V or ripple-free DC 120V for general lighting {译} 普通照明用电源电压不大于交流有效值50V或无纹波直流120V的半集成式LED灯 安全规范 |
China National Standards tin, |
 English PDF |
| GB/T 43618-2023 |
Non-destructive testing process tower gamma ray scanning method {译} 无损检测 工艺塔伽马射线扫描方法 |
China National Standards tin, |
English PDF |
| GB/T 43615-2023 |
Additive manufacturing Ultrasonic testing method of directed energy deposition metal forming parts {译} 增材制造 定向能量沉积金属成形件超声检测方法 |
China National Standards tin, |
English PDF |
| GB/T 43613-2023 |
Non-destructive testing Digital radiography image processing and communication {译} 无损检测 数字射线检测图像处理与通信 |
China National Standards tin, |
English PDF |
| GB/T 43607-2023 |
Palladium ingot analysis method Determination of silver, aluminum, gold, bismuth, chromium, copper, iron, iridium, magnesium, manganese, nickel, lead, platinum, rhodium, ruthenium, silicon, tin, zinc content Spark discharge atomic emission spectrometry {译} 钯锭分析方法 银、铝、金、铋、铬、铜、铁、铱、镁、锰、镍、铅、铂、铑、钌、硅、锡、锌含量测定 火花放电原子发射光谱法 |
China National Standards tin, |
English PDF |
| GB/T 43603.1-2023 |
Methods for chemical analysis of nickel-platinum target alloys Part 1: Determination of platinum content Inductively coupled plasma atomic emission spectrometry {译} 镍铂靶材合金化学分析方法 第1部分:铂含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards tin, |
English PDF |
| GB/T 43602-2023 |
Composition, structure and performance evaluation of physical vapor deposition multi-layer hard coatings {译} 物理气相沉积多层硬质涂层的成分、结构及性能评价 |
China National Standards tin, |
English PDF |
| GB/T 43599-2023 |
Oil and gas drilling equipment testing and evaluation of mechanical cementing plugs {译} 石油天然气钻采设备 机械式固井胶塞的测试与评价 |
China National Standards tin, |
English PDF |
| GB/T 43597-2023 |
Parameter testing method for pyroelectric terahertz detectors {译} 热电型太赫兹探测器参数测试方法 |
China National Standards tin, |
English PDF |
| GB/T 43595-2023 |
Guidelines for start-up testing and commissioning of hydraulic turbines, water pump turbines and energy storage pumps {译} 水轮机、水泵水轮机和蓄能泵启动试验及试运行导则 |
China National Standards tin, |
English PDF |
| GB/T 43582-2023 |
Blockchain and Distributed Accounting Technology Application Programming Interface Middleware Technology Guide {译} 区块链和分布式记账技术 应用程序接口 中间件技术指南 |
China National Standards tin, |
English PDF |
| GB/T 43580-2023 |
Blockchain and Distributed Accounting Technology General Service Guide for Certificate Deposits {译} 区块链和分布式记账技术 存证通用服务指南 |
China National Standards tin, |
English PDF |
| GB/T 43579-2023 |
Blockchain and distributed accounting technology Smart contract life cycle management technical specifications {译} 区块链和分布式记账技术 智能合约生命周期管理技术规范 |
China National Standards tin, |
English PDF |
| GB/T 43575-2023 |
Blockchain and distributed accounting technology system testing specifications {译} 区块链和分布式记账技术 系统测试规范 |
China National Standards tin, |
English PDF |
| GB/T 43573-2023 |
Method for determination of heat dissipation performance of clothing - sweating body warming dummy method {译} 服装散热性能的测定方法 出汗暖体假人法 |
China National Standards tin, |
English PDF |
| GB/T 43571-2023 |
Determination of migrating organotins in toy materials Gas chromatography-tandem mass spectrometry {译} 玩具材料中可迁移有机锡的测定 气相色谱-串联质谱法 |
China National Standards tin, |
English PDF |
| GB/T 43562-2023 |
Livestock and poultry slaughtering operating procedures Sheep {译} 畜禽屠宰操作规程 羊 |
China National Standards tin, |
English PDF |
| GB/T 43546-2023 |
Self-heating substance screening test method {译} 自热物质筛选试验方法 |
China National Standards tin, |
English PDF |
| GB/T 43531-2023 |
Optical performance testing method for multi-view stitching panoramic imaging equipment {译} 多目拼接全景成像设备光学性能测试方法 |
China National Standards tin, |
English PDF |
| GB/T 43526-2023 |
Technical regulations for connecting user-side electrochemical energy storage systems to distribution grids {译} 用户侧电化学储能系统接入配电网技术规定 |
China National Standards tin, |
English PDF |
| GB/T 43508-2023 |
General technical requirements for integrated rice and fishery planting and breeding {译} 稻渔综合种养通用技术要求 |
China National Standards tin, |
English PDF |
| GB/T 43501-2023 |
Ships and Offshore Technology - Vibration measurement, evaluation and reporting guidelines for habitability of ships with specific characteristics {译} 船舶和海上技术 特定特征船舶适居性的振动测量、评价和报告准则 |
China National Standards tin, |
English PDF |
| GB/T 43499-2023 |
Motor vehicle detection system software testing method {译} 机动车检测系统软件测试方法 |
China National Standards tin, |
English PDF |
| GB/T 43497-2023 |
Electrodeposition layer and related finishing Electroless nickel phosphorus-ceramic composite coating {译} 电沉积层及相关精饰 化学镀镍磷-陶瓷复合镀层 |
China National Standards tin, |
English PDF |
| GB/T 43493.3-2023 |
Semiconductor devices - Non-destructive testing and identification criteria for defects in silicon carbide homoepitaxial wafers for power devices - Part 3: Photoluminescence detection method of defects {译} 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第3部分：缺陷的光致发光检测方法 |
China National Standards tin, |
English PDF |
| GB/T 43493.2-2023 |
Semiconductor devices - Non-destructive testing and identification criteria for defects in silicon carbide homoepitaxial wafers for power devices - Part 2: Optical detection methods for defects {译} 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第2部分：缺陷的光学检测方法 |
China National Standards tin, |
English PDF |
| GB/T 43493.1-2023 |
Semiconductor devices - Non-destructive testing and identification criteria for defects in silicon carbide homoepitaxial wafers for power devices - Part 1: Defect classification {译} 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第1部分：缺陷分类 |
China National Standards tin, |
English PDF |
| GB/T 43492-2023 |
Prefabricated insulated ductile iron pipes, fittings and accessories {译} 预制保温球墨铸铁管、管件和附件 |
China National Standards tin, |
English PDF |
| GB/T 43486-2023 |
Heating system protective agent test method {译} 供暖系统保护剂测试方法 |
China National Standards tin, |
English PDF |
| GB/T 43484-2023 |
Additive Manufacturing High Temperature Alloy Powders for Laser Powder Bed Melting {译} 增材制造 激光粉末床熔融用高温合金粉末 |
China National Standards tin, |
English PDF |
| GB/T 43480-2023 |
Non-destructive testing Phased array ultrasonic cylindrical imaging guided wave testing {译} 无损检测 相控阵超声柱面成像导波检测 |
China National Standards tin, |
English PDF |
| GB/T 43467-2023 |
A guide to organizing and managing business meetings {译} 商业会议组织管理指南 |
China National Standards tin, |
English PDF |
| GB/T 39075.203-2023 |
Organic light-emitting diode (OLED) light sources for general lighting Safety Part 2-3: Special requirements Flexible OLED light sheets and panels {译} 普通照明用有机发光二极管（OLED）光源 安全 第2-3部分: 特殊要求 柔性OLED光片和面板 |
China National Standards tin, |
English PDF |
| GB/T 39075.202-2023 |
Organic light-emitting diode (OLED) light sources for general lighting Safety Part 2-2: Special requirements Integrated OLED modules {译} 普通照明用有机发光二极管（OLED）光源 安全 第2-2部分：特殊要求 集成式OLED模块 |
China National Standards tin, |
English PDF |
| GB/T 39075.201-2023 |
Organic light-emitting diode (OLED) light sources for general lighting Safety Part 2-1: Special requirements Semi-integrated OLED modules {译} 普通照明用有机发光二极管（OLED）光源 安全 第2-1部分：特殊要求 半集成式OLED模块 |
China National Standards tin, |
English PDF |
| GB/T 39075.1-2023 |
Organic light-emitting diode (OLED) light sources for general lighting - Safety Part 1: General requirements and tests {译} 普通照明用有机发光二极管（OLED）光源 安全 第1部分：一般要求和试验 |
China National Standards tin, |
English PDF |
| GB/T 34133-2023 |
Energy storage converter testing technical regulations {译} 储能变流器检测技术规程 |
China National Standards tin, |
English PDF |
| GB/T 32151.17-2023 |
Carbon Emission Accounting and Reporting Requirements Part 17: Fluorine Chemical Enterprises {译} 碳排放核算与报告要求 第17部分：氟化工企业 |
China National Standards tin, |
English PDF |
| GB/T 32151.16-2023 |
Carbon Emission Accounting and Reporting Requirements Part 16: Oil and Gas Production Enterprises {译} 碳排放核算与报告要求 第16部分：石油天然气生产企业 |
China National Standards tin, |
English PDF |
| GB/T 32151.15-2023 |
Carbon Emission Accounting and Reporting Requirements Part 15: Petrochemical Enterprises {译} 碳排放核算与报告要求 第15部分：石油化工企业 |
China National Standards tin, |
English PDF |
| GB/T 32151.14-2023 |
Carbon emission accounting and reporting requirements Part 14: Other non-ferrous metal smelting and rolling processing enterprises {译} 碳排放核算与报告要求 第14部分：其他有色金属冶炼和压延加工企业 |
China National Standards tin, |
English PDF |
| GB/T 32151.13-2023 |
Carbon Emissions Accounting and Reporting Requirements Part 13: Independent Coking Enterprises {译} 碳排放核算与报告要求 第13部分：独立焦化企业 |
China National Standards tin, |
English PDF |
| GB/T 32151.10-2023 |
Carbon Emission Accounting and Reporting Requirements Part 10: Chemical Manufacturing Enterprises {译} 碳排放核算与报告要求 第10部分：化工生产企业 |
China National Standards tin, |
English PDF |
| GB/T 32151.9-2023 |
Carbon Emission Accounting and Reporting Requirements Part 9: Ceramic Manufacturing Enterprises {译} 碳排放核算与报告要求 第9部分：陶瓷生产企业 |
China National Standards tin, |
English PDF |
| GB/T 32151.8-2023 |
Carbon Emission Accounting and Reporting Requirements Part 8: Cement Manufacturing Enterprises {译} 碳排放核算与报告要求 第8部分：水泥生产企业 |
China National Standards tin, |
English PDF |
| GB/T 32151.7-2023 |
Carbon Emission Accounting and Reporting Requirements Part 7: Flat Glass Manufacturing Enterprises {译} 碳排放核算与报告要求 第7部分：平板玻璃生产企业 |
China National Standards tin, |
English PDF |
| GB/T 31308.4-2023 |
Data elements, processes and documents in administration, commerce and industry Long-lasting signatures Part 4: Attestation object attributes for long-lasting signature formats {译} 行政、商业和行业中的数据元、过程和文档 长效签名 第4部分：用于长效签名格式的存证对象属性 |
China National Standards tin, |
English PDF |
| GB/T 31308.3-2023 |
Data elements, processes and documents in administration, commerce and industry Long-lasting signatures Part 3: Long-lasting signature specifications for PDF Advanced Electronic Signatures (PAdES) {译} 行政、商业和行业中的数据元、过程和文档 长效签名 第3部分: PDF高级电子签名（PAdES）的长效签名规范 |
China National Standards tin, |
English PDF |
| GB/T 31239-2023 |
Technical Specifications for 1000kV Substation Fittings {译} 1000kV变电站金具技术规范 |
China National Standards tin, |
English PDF |
| GB/T 30420.3-2023 |
Sewing Machinery Terminology Part 3: Spreading and Cutting Equipment Terminology {译} 缝制机械术语 第3部分: 铺布裁剪设备术语 |
China National Standards tin, |
English PDF |
| GB/T 30130-2023 |
offset printing paper {译} 胶版印刷纸 |
China National Standards tin, |
English PDF |
| GB/T 29043-2023 |
Methods for testing the thermal insulation performance of building curtain walls {译} 建筑幕墙保温性能检测方法 |
China National Standards tin, |
English PDF |
| GB/T 28511.2-2023 |
Planar optical waveguide integrated optical circuit devices Part 2: Dense wavelength division multiplexing (DWDM) filters based on arrayed waveguide grating (AWG) technology {译} 平面光波导集成光路器件 第2部分：基于阵列波导光栅（AWG）技术的密集波分复用（DWDM）滤波器 |
China National Standards tin, |
English PDF |
| GB/T 26705-2023 |
Lightweight printing paper {译} 轻型印刷纸 |
China National Standards tin, |
English PDF |
| GB/T 26688-2023 |
Battery-powered emergency evacuation lighting automatic test system {译} 电池供电的应急疏散照明自动试验系统 |
China National Standards tin, |
English PDF |
| GB/T 24906-2023 |
Safety regulations for self-ballasted LED lamps above 50V for general lighting {译} 普通照明用50V以上自镇流LED灯 安全规范 |
China National Standards tin, |
English PDF |
| GB/T 24834-2023 |
Technical Specifications for Fittings of 1000kV AC Overhead Transmission Lines {译} 1000kV交流架空输电线路金具技术规范 |
China National Standards tin, |
English PDF |
| GB/T 24819-2023 |
Safety regulations for LED modules for general lighting {译} 普通照明用LED模块 安全规范 |
China National Standards tin, |
English PDF |
| GB/T 20776-2023 |
Lifting machinery classification {译} 起重机械分类 |
China National Standards tin, |
English PDF |
| GB/T 20186.3-2023 |
Secondary coating materials for optical fibers Part 3: Modified polycarbonate {译} 光纤用二次被覆材料 第3部分：改性聚碳酸酯 |
China National Standards tin, |
English PDF |
| GB/T 20064.1-2023 |
Reciprocating internal combustion engines - Handle starters - Part 1: Safety requirements and tests {译} 往复式内燃机 手柄起动装置 第1部分：安全要求和试验 |
China National Standards tin, |
English PDF |
| GB/T 19510.207-2023 |
Light source control devices Part 2-7: Special requirements for electronic control devices powered by safety service power supplies (ESSS) for emergency lighting (self-contained) {译} 光源控制装置 第2-7部分：应急照明（自容式）用安全服务电源（ESSS）供电电子控制装置的特殊要求 |
China National Standards tin, |
English PDF |
| GB/T 19510.201-2023 |
Light source control devices Part 2-1: Special requirements for starting devices (other than glow starters) {译} 光源控制装置 第2-1部分: 启动装置(辉光启动器除外)的特殊要求 |
China National Standards tin, |
English PDF |
| GB/T 17626.39-2023 |
Electromagnetic compatibility - Testing and measurement technology - Part 39: Close range radiated field immunity test {译} 电磁兼容 试验和测量技术 第39部分：近距离辐射场抗扰度试验 |
China National Standards tin, |
English PDF |
| GB/T 17626.30-2023 |
Electromagnetic compatibility - Testing and measurement technology - Part 30: Power quality measurement methods {译} 电磁兼容 试验和测量技术 第30部分：电能质量测量方法 |
China National Standards tin, |
English PDF |
| GB/T 17626.3-2023 |
Electromagnetic compatibility Testing and measurement technology Part 3: Radio frequency electromagnetic field radiation immunity test {译} 电磁兼容 试验和测量技术 第3部分：射频电磁场辐射抗扰度试验 |
China National Standards tin, |
English PDF |
| GB/T 16844-2023 |
Safety regulations for self-ballasted fluorescent lamps for general lighting {译} 普通照明用自镇流荧光灯 安全规范 |
China National Standards tin, |
English PDF |
| GB/T 14196.2-2023 |
Incandescent lamps - Safety regulations - Part 2: Tungsten halogen lamps for general lighting in households and similar places {译} 白炽灯 安全规范 第2部分：家庭和类似场合普通照明用卤钨灯 |
China National Standards tin, |
English PDF |
| GB/T 14196.1-2023 |
Incandescent lamps - Safety regulations - Part 1: Tungsten filament lamps for general lighting in homes and similar places {译} 白炽灯 安全规范 第1部分：家庭和类似场合普通照明用钨丝灯 |
China National Standards tin, |
English PDF |
| GB/T 10739-2023 |
Paper, paperboard and pulp Standard atmospheric conditions for specimen handling and testing {译} 纸、纸板和纸浆 试样处理和试验的标准大气条件 |
China National Standards tin, |
English PDF |
| GB/T 10067.6-2023 |
Basic technical conditions for electrothermal and electromagnetic treatment devices Part 6: Industrial microwave heating devices {译} 电热和电磁处理装置基本技术条件 第6部分：工业微波加热装置 |
China National Standards tin, |
English PDF |
| GB/Z 43482-2023 |
Hydraulic transmissions Hoses and hose assemblies Methods of collecting fluid samples for analysis of cleanliness {译} 液压传动 软管和软管总成 收集流体样本分析清洁度的方法 |
China National Standards tin, |
English PDF |
| GB/T 7679.3-2023 |
Mining Machinery Terminology Part 3: Lifting Equipment {译} 矿山机械术语 第3部分：提升设备 |
China National Standards tin, |
English PDF |
| GB/T 7000.223-2023 |
Luminaires Part 2-23: Special requirements Extra-low voltage (ELV) lighting systems for use with extra-low voltage (ELV) light sources {译} 灯具 第2-23部分：特殊要求 特低电压（ELV）光源用特低电压照明系统 |
China National Standards tin, |
English PDF |
| GB/T 7000.222-2023 |
Luminaires Part 2-22: Special requirements Emergency lighting fixtures {译} 灯具 第2-22部分：特殊要求 应急照明灯具 |
China National Standards tin, |
English PDF |
| GB/T 7000.217-2023 |
Luminaires Part 2-17: Special requirements Luminaires for stage lighting, television, film and photography venues (indoor and outdoor) {译} 灯具 第2-17部分：特殊要求 舞台灯光、电视、电影及摄影场所(室内外)用灯具 |
China National Standards tin, |
English PDF |
| GB/T 7000.212-2023 |
Lighting Fixtures Part 2-12: Special Requirements Night Lights for Electrical Socket Mounting {译} 灯具 第2-12部分：特殊要求 电源插座安装的夜灯 |
China National Standards tin, |
English PDF |
| GB/T 7000.211-2023 |
Lighting Fixtures Part 2-11: Special Requirements Aquarium Lighting Fixtures {译} 灯具 第2-11部分：特殊要求 水族箱灯具 |
China National Standards tin, |
English PDF |
| GB/T 7000.208-2023 |
Lighting Fixtures Part 2-8: Special Requirements Portable Lamps {译} 灯具 第2-8部分：特殊要求 手提灯 |
China National Standards tin, |
English PDF |
| GB/T 5700-2023 |
Lighting measurement methods {译} 照明测量方法 |
China National Standards tin, |
English PDF |
| GB/T 5019.5-2023 |
Mica-based insulating materials Part 5: Rigid mica sheets for electric heating equipment {译} 以云母为基的绝缘材料 第5部分：电热设备用硬质云母板 |
China National Standards tin, |
English PDF |
| GB/T 3939.2-2023 |
Naming and marking of main fishing gear materials Part 2: Netting {译} 主要渔具材料命名与标记 第2部分：网片 |
China National Standards tin, |
English PDF |
| GB/T 1196-2023 |
Aluminum ingots for remelting {译} 重熔用铝锭 |
China National Standards tin, |
English PDF |
| GB 43473-2023 |
Control devices and components for lighting products Safety requirements {译} 照明产品用控制装置及其部件 安全要求 |
China National Standards tin, |
English PDF |
| GB 15607-2023 |
Safety regulations for coating operations Safety of powder electrostatic spraying process {译} 涂装作业安全规程 粉末静电喷涂工艺安全 |
China National Standards tin, |
English PDF |
| GB 8109-2023 |
Trolley mounted fire extinguisher {译} 推车式灭火器 |
China National Standards tin, |
English PDF |
| GB 6514-2023 |
Safety regulations for painting operations Painting process safety and ventilation {译} 涂装作业安全规程 涂漆工艺安全及其通风 |
China National Standards tin, |
English PDF |
| GB 4351-2023 |
Portable fire extinguisher {译} 手提式灭火器 |
China National Standards tin, |
English PDF |
| GB/Z 43281-2023 |
Point-of-Care Testing (POCT) Equipment Supervisors and Operators Guide {译} 即时检验（POCT）设备监督员和操作员指南 |
China National Standards tin, |
English PDF |
| GB/Z 43414-2023 |
Nondestructive Testing Nondestructive Testing Training Outline {译} 无损检测 无损检测培训大纲 |
China National Standards tin, |
English PDF |
| GB/Z 43410-2023 |
Non-destructive testing Automatic ultrasonic testing System selection and application {译} 无损检测 自动超声检测 系统选择和应用 |
China National Standards tin, |
English PDF |
| GB/T 43353-2023 |
Odor release testing of building materials products Environmental test chamber method {译} 建材产品的气味释放测试 环境测试舱法 |
China National Standards tin, |
English PDF |
| GB/T 26781-2023 |
Guidelines for the distribution of floating navigation aids in sea areas {译} 海区浮动助航标志配布导则 |
China National Standards tin, |
English PDF |
| GB/T 43365-2023 |
Additive Manufacturing Sand Mold Performance Testing Method for Metal Castings {译} 增材制造 金属铸件用砂型性能检测方法 |
China National Standards tin, |
English PDF |
| GB/T 43233-2023 |
Additive Manufacturing System Performance and Reliability Acceptance Test of Laser Powder Bed Melting Equipment for Metal Materials in Aerospace {译} 增材制造 系统性能和可靠性 航空航天用金属材料激光粉末床熔融设备验收试验 |
China National Standards tin, |
English PDF |
| GB/T 43418-2023 |
Method for testing the composition of flax fiber {译} 亚麻纤维组成成分的检测方法 |
China National Standards tin, |
English PDF |
| GB/T 20392-2023 |
Cotton fiber physical properties testing method Large capacity fiber tester method {译} 棉纤维物理性能试验方法 大容量纤维测试仪法 |
China National Standards tin, |
English PDF |
| GB/T 43256-2023 |
Parameter testing method of distributed optical fiber strain testing system {译} 分布式光纤应变测试系统参数测试方法 |
China National Standards tin, |
English PDF |
| GB/T 4893.4-2023 |
Testing of physical and chemical properties of paint films on furniture surfaces Part 4: Adhesion cross-cut determination method {译} 家具表面漆膜理化性能试验 第4部分：附着力交叉切割测定法 |
China National Standards tin, |
English PDF |
| GB/T 43415-2023 |
Heavy machinery casting design requirements {译} 重型机械 铸件设计要求 |
China National Standards tin, |
English PDF |
| GB/T 43359-2023 |
Printing and dyeing wastewater membrane method integrated equipment {译} 印染废水膜法集成装备 |
China National Standards tin, |
English PDF |
| GB/T 43392-2023 |
Safety performance testing and evaluation method of subway disaster prevention system {译} 地铁防灾系统安全性能测试与评估方法 |
China National Standards tin, |
English PDF |
| GB/T 26949.7-2023 |
Industrial Vehicles Stability Verification Part 7: Bi-directional and multi-directional operating forklifts {译} 工业车辆 稳定性验证 第7部分：双向和多向运行叉车 |
China National Standards tin, |
English PDF |
| GB/T 43363-2023 |
Determination of form distribution of 12 elements including copper, zinc, cadmium, lead and chromium in waste chemicals. Continuous extraction method {译} 废弃化学品中铜、锌、镉、铅、铬等12种元素形态分布的测定 连续提取法 |
China National Standards tin, |
English PDF |
| GB/T 20001.8-2023 |
Standard Drafting Rules Part 8: Evaluation Criteria {译} 标准起草规则 第8部分：评价标准 |
China National Standards tin, |
English PDF |
| GB/T 43022.2-2023 |
Rail transit - DC surge arresters and voltage limiting devices - Part 2: Voltage limiting devices {译} 轨道交通 直流避雷器和电压限制装置 第2部分：电压限制装置 |
China National Standards tin, |
English PDF |
| GB/T 43022.1-2023 |
Rail transit - DC surge arresters and voltage limiting devices - Part 1: Gapless metal oxide surge arresters {译} 轨道交通 直流避雷器和电压限制装置 第1部分：无间隙金属氧化物避雷器 |
China National Standards tin, |
English PDF |
| GB/T 3310-2023 |
Ultrasonic testing method for copper and copper alloy rods {译} 铜及铜合金棒材超声检测方法 |
China National Standards tin, |
English PDF |
| GB/T 3260.11-2023 |
Methods for chemical analysis of tin Part 11: Determination of copper, iron, bismuth, lead, antimony, arsenic, aluminum, zinc, cadmium, silver, nickel and cobalt content - Inductively coupled plasma atomic emission spectrometry {译} 锡化学分析方法 第11部分：铜、铁、铋、铅、锑、砷、铝、锌、镉、银、镍和钴含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards tin, |
English PDF |
| GB/T 18329.2-2023 |
Sliding bearings Multi-layer metal sliding bearings Part 2: Destructive testing of bonding strength for alloys with thickness ≥ 2 mm {译} 滑动轴承 多层金属滑动轴承 第2部分：合金厚度≥2mm的结合强度破坏性试验 |
China National Standards tin, |
English PDF |
| GB/T 18329.1-2023 |
Sliding bearings Multi-layer metal sliding bearings Part 1: Ultrasonic non-destructive testing of bond quality for alloys with thickness ≥0.5mm {译} 滑动轴承 多层金属滑动轴承 第1部分：合金厚度≥0.5mm的结合质量超声无损检验 |
China National Standards tin, |
English PDF |
| GB/T 783-2023 |
Lifting machinery basic parameter series {译} 起重机械 基本参数系列 |
China National Standards tin, |
English PDF |
| GB/T 2900.65-2023 |
Electrical Terminology Lighting {译} 电工术语 照明 |
China National Standards tin, |
English PDF |
| GB/T 24966-2023 |
Grating vehicle detector {译} 光栅车辆检测器 |
China National Standards tin, |
English PDF |
| GB/T 14308-2023 |
Classification and Rating of Tourist Hotel Stars {译} 旅游饭店星级的划分与评定 |
China National Standards tin, |
English PDF |
| GB/T 43313-2023 |
Testing of surface quality and microtube density of polished silicon carbide wafers by confocal differential interference method {译} 碳化硅抛光片表面质量和微管密度的测试 共焦点微分干涉法 |
China National Standards tin, |
English PDF |
| GB/T 43325-2023 |
Foundry machinery - Cutting, grinding and finishing equipment for cleaning of castings - Technical safety regulations {译} 铸造机械 铸件清理用切割、磨削和精整设备 安全技术规范 |
China National Standards tin, |
English PDF |
| GB/T 43319-2023 |
Casting machinery Investment and lost foam casting equipment Safety technical specifications {译} 铸造机械 熔模和消失模铸造设备 安全技术规范 |
China National Standards tin, |
English PDF |
| GB/T 41312.3-2023 |
Permeability testing methods for equipment used in chemical industry Part 3: Plastics and their lining equipment {译} 化工用设备渗透性检测方法 第3部分：塑料及其衬里设备 |
China National Standards tin, |
English PDF |
| GB/T 41312.2-2023 |
Permeability testing methods for chemical industry equipment Part 2: Fiber reinforced thermosetting plastic equipment {译} 化工用设备渗透性检测方法 第2部分：纤维增强热固性塑料设备 |
China National Standards tin, |
English PDF |
| GB/T 43411-2023 |
Electron beam selective melting additive manufacturing machine tools general technical conditions {译} 电子束选区熔化增材制造机床 通用技术条件 |
China National Standards tin, |
English PDF |
| GB/T 8586-2023 |
Operating frequency allocation of fish finders and technical specifications for preventing acoustic interference {译} 探鱼仪工作频率分配及其防止声波干扰技术规范 |
China National Standards tin, |
English PDF |
| GB/Z 41082.2-2023 |
Wheelchairs Part 2: Typical values and recommended limit values of dimensions, mass and operating space measured according to GB/Z 18029.5 {译} 轮椅车 第2部分：按GB/Z 18029.5测得的尺寸、质量和操作空间的典型值和推荐限制值 |
China National Standards tin, |
English PDF |
| GB/T 20405.1-2023 |
Urine absorbent for incontinence Polyacrylate super absorbent powder Part 1: Determination of pH value {译} 失禁者用尿液吸收剂 聚丙烯酸酯高吸水性粉末 第1部分：pH值的测定方法 |
China National Standards tin, |
English PDF |
| GB/T 43279.3-2023 |
Molecular in vitro diagnostic tests. Specification of pre-test procedures for venous whole blood. Part 3: Isolation of plasma circulating cell-free DNA. {译} 分子体外诊断检验 静脉全血检验前过程的规范 第3部分：分离血浆循环游离DNA |
China National Standards tin, |
English PDF |
| GB/T 16826-2023 |
Electro-hydraulic servo universal testing machine {译} 电液伺服万能试验机 |
China National Standards tin, |
English PDF |
| GB/T 43403-2023 |
Road vehicles Trailers below 3.5t Quality inspection after fatigue test of welded traction brackets for connecting balls {译} 道路车辆 3.5t以下挂车 连接球用焊接牵引支架疲劳试验后的质量检查 |
China National Standards tin, |
English PDF |
| GB/T 43299-2023 |
Test method for electric heating performance of motor vehicle glass {译} 机动车玻璃电加热性能试验方法 |
China National Standards tin, |
English PDF |
| GB/T 43255-2023 |
Test method for low temperature cold starting performance of fuel cell electric vehicles {译} 燃料电池电动汽车低温冷起动性能试验方法 |
China National Standards tin, |
English PDF |
| GB/T 23101.4-2023 |
Surgical implants Hydroxyapatite Part 4: Determination of coating bond strength {译} 外科植入物 羟基磷灰石 第4部分：涂层粘结强度的测定 |
China National Standards tin, |
English PDF |
| GB/T 43346-2023 |
Technical conditions for starting and stopping the use of lead-acid batteries {译} 起停用铅酸蓄电池 技术条件 |
China National Standards tin, |
English PDF |
| GB/T 5008.2-2023 |
Lead-acid batteries for starting use Part 2: Product variety specifications and terminal dimensions and markings {译} 起动用铅酸蓄电池 第2部分：产品品种规格和端子尺寸、标记 |
China National Standards tin, |
English PDF |
| GB/T 5008.1-2023 |
Lead-acid batteries for starting use Part 1: Technical conditions and test methods {译} 起动用铅酸蓄电池 第1部分：技术条件和试验方法 |
China National Standards tin, |
English PDF |
| GB/T 14713-2023 |
General technical conditions for rotary cutting machines {译} 旋切机通用技术条件 |
China National Standards tin, |
English PDF |
| GB/T 43413-2023 |
Non-destructive testing Infrared thermal imaging testing General rules for thermoelastic stress measurement methods {译} 无损检测 红外热成像检测 热弹性应力测量方法通则 |
China National Standards tin, |
English PDF |
| GB/T 43320-2023 |
Non-destructive testing of welds, ultrasonic testing, application of automatic phased array technology for thin-walled steel components {译} 焊缝无损检测 超声检测 薄壁钢构件自动相控阵技术的应用 |
China National Standards tin, |
English PDF |
| GB/T 29712-2023 |
Weld non-destructive testing Ultrasonic testing Acceptance level {译} 焊缝无损检测 超声检测 验收等级 |
China National Standards tin, |
English PDF |
| GB/T 29711-2023 |
Non-destructive testing of welds Ultrasonic testing Characteristics of internal discontinuities in welds {译} 焊缝无损检测 超声检测 焊缝内部不连续的特征 |
China National Standards tin, |
English PDF |
| GB/T 11345-2023 |
Weld non-destructive testing Ultrasonic testing technology, testing levels and assessments {译} 焊缝无损检测 超声检测 技术、检测等级和评定 |
China National Standards tin, |
English PDF |
| GB/T 43409-2023 |
Metallographic examination of carbon steel and low alloy steel castings for general engineering and structural purposes {译} 一般工程与结构用碳钢及低合金钢铸件金相检验 |
China National Standards tin, |
English PDF |
| GB/T 21218-2023 |
Unused silicon insulating liquid for electrical use {译} 电气用未使用过的硅绝缘液体 |
China National Standards tin, |
English PDF |
| GB/T 15558.3-2023 |
Buried polyethylene (PE) piping systems for gas use Part 3: Pipe fittings {译} 燃气用埋地聚乙烯（PE）管道系统 第3部分：管件 |
China National Standards tin, |
English PDF |
| GB/T 19494.3-2023 |
Mechanized sampling of coal Part 3: Determination of precision and bias testing {译} 煤炭机械化采样 第3部分：精密度测定和偏倚试验 |
China National Standards tin, |
English PDF |
| GB/T 13871.4-2023 |
Rotating shaft lip seals with elastomer sealing elements - Part 4: Performance test procedures {译} 密封元件为弹性体材料的旋转轴唇形密封圈 第4部分：性能试验程序 |
China National Standards tin, |
English PDF |
| GB/T 13871.3-2023 |
Lip seals for rotating shafts with elastomeric sealing elements - Part 3: Storage, handling and installation {译} 密封元件为弹性体材料的旋转轴唇形密封圈 第3部分：贮存、搬运和安装 |
China National Standards tin, |
English PDF |
| GB/T 19520.21-2023 |
Mechanical Structure of Electrical and Electronic Equipment 482.6 mm (19 in) Series Mechanical Structure Dimensions Part 3-109: Chassis Dimensions of Embedded Computing Devices {译} 电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-109部分：嵌入式计算设备的机箱尺寸 |
China National Standards tin, |
English PDF |
| GB/T 43433-2023 |
Information technology cloud computing virtual machine resource management system testing method {译} 信息技术 云计算 虚拟机资源管理系统测试方法 |
China National Standards tin, |
English PDF |
| GB/T 43431-2023 |
Information technology Cloud data storage and management Object-based cloud storage application interface testing method {译} 信息技术 云数据存储和管理 基于对象的云存储应用接口测试方法 |
China National Standards tin, |
English PDF |
| GB/T 15548-2023 |
General technical conditions for three-phase synchronous generators driven by reciprocating internal combustion engines {译} 往复式内燃机驱动的三相同步发电机通用技术条件 |
China National Standards tin, |
English PDF |
| GB/T 43297-2023 |
Plastics—Methods for evaluating photoaging properties of polymers—Fourier transform infrared spectroscopy and UV/visible spectroscopy {译} 塑料 聚合物光老化性能评估方法 傅里叶红外光谱和紫外/可见光谱法 |
China National Standards tin, |
English PDF |
| GB/T 19042.6-2023 |
Evaluation and routine testing of medical imaging departments Part 3-6: Imaging performance acceptance and stability testing of mammography X-ray equipment in breast tomosynthesis imaging mode {译} 医用成像部门的评价及例行试验 第3-6部分:乳腺断层合成成像模式下乳腺摄影X射线设备成像性能验收与稳定性试验 |
China National Standards tin, |
English PDF |
| GB/T 17382-2023 |
Series 1 Containers Loading, Unloading and Bolting {译} 系列1集装箱 装卸和栓固 |
China National Standards tin, |
English PDF |
| GB/T 1835-2023 |
Series 1 container corner fittings technical requirements {译} 系列1集装箱 角件技术要求 |
China National Standards tin, |
English PDF |
| GB 31604.1-2023 |
National Food Safety Standards General Principles for Migration Testing of Food Contact Materials and Products {译} 食品安全国家标准 食品接触材料及制品迁移试验通则 |
China National Standards tin, |
English PDF |
| GB 4789.35-2023 |
National Food Safety Standards Food Microbiology Testing Lactobacillus Testing {译} 食品安全国家标准 食品微生物学检验 乳酸菌检验 |
China National Standards tin, |
English PDF |
| GB 4789.26-2023 |
National Food Safety Standards Food Microbiology Testing Commercial Sterility Testing {译} 食品安全国家标准 食品微生物学检验 商业无菌检验 |
China National Standards tin, |
English PDF |
| GB 1903.60-2023 |
National Food Safety Standard Food Nutritional Enhancer L-Carnitine Tartrate {译} 食品安全国家标准 食品营养强化剂 L-肉碱酒石酸盐 |
China National Standards tin, |
English PDF |
| GB 5009.259-2023 |
National food safety standards Determination of biotin in food {译} 食品安全国家标准 食品中生物素的测定 |
China National Standards tin, |
English PDF |
| GB 5009.89-2023 |
National food safety standards Determination of nicotinic acid and nicotinamide in food {译} 食品安全国家标准 食品中烟酸和烟酰胺的测定 |
China National Standards tin, |
English PDF |
| GB 5009.16-2023 |
National food safety standards Determination of tin in food {译} 食品安全国家标准 食品中锡的测定 |
China National Standards tin, |
English PDF |
| GB 4789.2-2022 |
National Food Safety Standards Food Microbiology Testing Determination of Total Count of Bacteria {译} 食品安全国家标准 食品微生物学检验 菌落总数测定 |
China National Standards tin, |
English PDF |
| GB 1886.321-2021 |
National Food Safety Standard Food Additive Thaumatin {译} 食品安全国家标准 食品添加剂 索马甜 |
China National Standards tin, |
English PDF |
| GB 4789.44-2020 |
National food safety standards Food microbiology testing Vibrio vulnificus testing {译} 食品安全国家标准 食品微生物学检验 创伤弧菌检验 |
China National Standards tin, |
English PDF |
| GB 4789.29-2020 |
National food safety standards Food microbiology testing Burkholderia gladioli (Pseudomonas cocotoxin subspecies fermented rice noodles) testing {译} 食品安全国家标准 食品微生物学检验 唐菖蒲伯克霍尔德氏菌（椰毒假单胞菌酵米面亚种）检验 |
China National Standards tin, |
English PDF |
| GB 43284-2023 |
Requirements for restricting excessive packaging of commodities Fresh edible agricultural products {译} 限制商品过度包装要求 生鲜食用农产品 |
China National Standards tin, |
English PDF |
| GB 43049-2023 |
Continuous casting machine safety technical conditions {译} 连铸机安全技术条件 |
China National Standards tin, |
English PDF |
| GB 18279-2023 |
Sterilization of healthcare products Ethylene oxide Requirements for the development, validation and routine control of medical device sterilization processes {译} 医疗保健产品灭菌 环氧乙烷 医疗器械灭菌过程的开发、确认和常规控制要求 |
China National Standards tin, |
English PDF |
| GB/T 30433-2021 |
Standard chromatographic column for liquid chromatography testing "Modification No. 1" {译} 液相色谱仪测试用标准色谱柱《第1号修改单》 |
China National Standards tin, |
English PDF |
| GB/Z 43036-2023 |
Rotating electrical machines - Measurement of end vibration of stator formed windings {译} 旋转电机 定子成型绕组端部振动的测量 |
China National Standards tin, |
English PDF |
| GB/Z 20833.5-2023 |
Rotating electrical machines - Winding insulation - Part 5: Offline measurement of partial discharge onset voltage under repeated impulse voltages {译} 旋转电机 绕组绝缘 第5部分：重复冲击电压下局部放电起始电压的离线测量 |
China National Standards tin, |
English PDF |
| GB/T 8026-2023 |
Determination of melting point of petroleum wax and petroleum grease droplets {译} 石油蜡和石油脂滴熔点测定法 |
China National Standards tin, |
English PDF |
| GB/T 7184-2023 |
Reciprocating internal combustion engine vibration assessment method {译} 往复式内燃机 振动评定方法 |
China National Standards tin, |
English PDF |
| GB/T 5170.21-2023 |
Inspection methods for environmental testing equipment Part 21: Hydraulic vibration systems for vibration (random) testing {译} 环境试验设备检验方法 第21部分：振动（随机）试验用液压式振动系统 |
China National Standards tin, |
English PDF |
| GB/T 5170.14-2023 |
Inspection methods for environmental testing equipment Part 14: Electric vibration system for vibration (sinusoidal) testing {译} 环境试验设备检验方法 第14部分：振动（正弦）试验用电动式振动系统 |
China National Standards tin, |
English PDF |
| GB/T 4937.26-2023 |
Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) susceptibility testing Human Body Model (HBM) {译} 半导体器件 机械和气候试验方法 第26部分：静电放电（ESD）敏感度测试 人体模型（HBM） |
China National Standards tin, |
English PDF |
| GB/T 4893.8-2023 |
Testing of physical and chemical properties of furniture surfaces Part 8: Determination of wear resistance {译} 家具表面理化性能试验 第8部分：耐磨性测定法 |
China National Standards tin, |
English PDF |
| GB/T 43241-2023 |
Forensic Science Nitrous Oxide Testing Gas Chromatography-Mass Spectrometry {译} 法庭科学 一氧化二氮检验 气相色谱-质谱法 |
China National Standards tin, |
English PDF |
| GB/T 43239-2023 |
Specifications for setting signs of urban comprehensive pipe corridors {译} 城市综合管廊标识设置规范 |
China National Standards tin, |
English PDF |
| GB/T 43237-2023 |
Public Behavior Guidelines for Preventing Meteorological Disasters Typhoon {译} 公众气象灾害防御行为指南 台风 |
China National Standards tin, |
English PDF |
| GB/T 43226-2023 |
Single-event soft error time domain testing method for semiconductor integrated circuits used in aerospace applications {译} 宇航用半导体集成电路单粒子软错误时域测试方法 |
China National Standards tin, |
English PDF |
| GB/T 43222-2023 |
Safety requirements for stratospheric airship testing {译} 平流层飞艇测试安全性要求 |
China National Standards tin, |
English PDF |
| GB/T 43201.2-2023 |
Industrial Automation Systems and Integration Standardized Procedures for Production Systems Engineering Part 2: Reference Process for Seamlessly Connecting Production Plans {译} 工业自动化系统与集成 生产系统工程的标准化程序 第2部分：无缝衔接生产计划的参考过程 |
China National Standards tin, |
English PDF |
| GB/T 43188-2023 |
Guidelines for evaluating the condition of generator equipment {译} 发电机设备状态评价导则 |
China National Standards tin, |
English PDF |
| GB/T 43170-2023 |
Wool Sampling and Testing Rules {译} 羊毛取样和试验规则 |
China National Standards tin, |
English PDF |
| GB/T 43169-2023 |
Quarantine and Identification Methods for Potato Spot Pathogen {译} 马铃薯斑纹病菌检疫鉴定方法 |
China National Standards tin, |
English PDF |
| GB/T 43167-2023 |
Standard hard water for pesticide testing {译} 农药检测用标准硬水 |
China National Standards tin, |
English PDF |
| GB/T 43164-2023 |
Risk analysis of pests in cross-border transportation of plant growing media for planting {译} 种植用植物生长介质跨境运输有害生物风险分析 |
China National Standards tin, |
English PDF |
| GB/T 43162-2023 |
Quarantine and identification method of fruit fly in European cherry {译} 欧洲樱桃绕实蝇检疫鉴定方法 |
China National Standards tin, |
English PDF |
| GB/T 43160-2023 |
Quarantine and identification methods of Erwinia amylovora {译} 梨火疫病菌检疫鉴定方法 |
China National Standards tin, |
English PDF |
| GB/T 43158-2023 |
Quarantine and Identification Methods for Potato Blackleg {译} 马铃薯黑胫病菌检疫鉴定方法 |
China National Standards tin, |
English PDF |
| GB/T 43157-2023 |
Quarantine and identification method of Lycoris mealybug {译} 石蒜绵粉蚧检疫鉴定方法 |
China National Standards tin, |
English PDF |
| GB/T 43144-2023 |
Nondestructive testing Acoustic emission testing Testing methods for damage assessment of reinforced concrete beams {译} 无损检测 声发射检测 钢筋混凝土梁损伤评定的检测方法 |
China National Standards tin, |
English PDF |
| GB/T 43143-2023 |
Nondestructive testing Acoustic emission testing Detection method for classification of active cracks in concrete structures {译} 无损检测 声发射检测 混凝土结构活动裂缝分类的检测方法 |
China National Standards tin, |
English PDF |
| GB/T 43139-2023 |
Density testing of cast aluminum alloy liquid reduced pressure solidification samples {译} 铸造铝合金液减压凝固试样密度检测 |
China National Standards tin, |
English PDF |
| GB/T 43138-2023 |
Earthmoving machinery Lifting and lashing connection points Performance requirements {译} 土方机械 起吊和捆系连接点 性能要求 |
China National Standards tin, |
English PDF |
| GB/T 43130.1-2023 |
Liquefied natural gas plants and equipment - Design of floating liquefied natural gas plants - Part 1: General requirements {译} 液化天然气装置和设备 浮式液化天然气装置的设计 第1部分：通用要求 |
China National Standards tin, |
English PDF |
| GB/T 43102-2023 |
Metal coatings Porosity test Determination of porosity of gold or palladium coatings using sulfurous acid/sulfur dioxide vapor {译} 金属覆盖层 孔隙率试验 用亚硫酸/二氧化硫蒸汽测定金或钯镀层孔隙率 |
China National Standards tin, |
English PDF |
| GB/T 43101-2023 |
Metallic and other inorganic coatings Definition and general rules regarding porosity {译} 金属及其他无机覆盖层 关于孔隙率的定义和一般规则 |
China National Standards tin, |
English PDF |
| GB/T 43100-2023 |
Thermal Spraying Post-processing and finishing of thermal spray coatings {译} 热喷涂 热喷涂涂层的后处理和精加工 |
China National Standards tin, |
English PDF |
| GB/T 43099-2023 |
Metal and other inorganic covering layers Tin-cobalt alloy electroplating layer {译} 金属及其他无机覆盖层 锡钴合金电镀层 |
China National Standards tin, |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
