Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 19794-2023 |
Agricultural irrigation equipment, dosing valves, technical requirements and test methods {译} 农业灌溉设备 定量阀 技术要求和试验方法 |
China National Standards valves, |
 English PDF |
| GB/T 18688-2023 |
Agricultural irrigation equipment - Pressure loss in irrigation valves - Test methods {译} 农业灌溉设备 灌溉阀的压力损失 试验方法 |
China National Standards valves, |
English PDF |
| GB/T 19699-2023 |
Ships and Offshore Technology Cargo Tank Pressure-Vacuum valves and Flame Arrestors {译} 船舶和海上技术 液货舱压力-真空阀和阻火装置 |
China National Standards valves, |
English PDF |
| GB/T 15558.4-2023 |
Buried polyethylene (PE) piping systems for gas use Part 4: Valves {译} 燃气用埋地聚乙烯（PE）管道系统 第4部分：阀门 |
China National Standards valves, |
English PDF |
| GB/T 23337-2023 |
Internal combustion engine intake and exhaust valves technical conditions {译} 内燃机 进、排气门 技术条件 |
China National Standards valves, |
English PDF |
| GB/T 12230-2023 |
General valves - technical specifications for stainless steel castings {译} 通用阀门 不锈钢铸件技术条件 |
China National Standards valves, |
English PDF |
| GB/T 8464-2023 |
Iron, copper and stainless steel threaded connection valves {译} 铁制、铜制和不锈钢制螺纹连接阀门 |
China National Standards valves, |
English PDF |
| GB/T 600-2023 |
General technical specifications for ship pipeline valves {译} 船舶管路阀件通用技术条件 |
China National Standards valves, |
English PDF |
| GB/T 26481-2022 |
Fugitive test of industrial valves {译} 工业阀门的逸散性试验 |
China National Standards valves, |
English PDF |
| GB/T 42177-2022 |
Technical requirements and test methods for hydrogen valves in hydrogen refueling stations {译} 加氢站氢气阀门技术要求及试验方法 |
China National Standards valves, |
English PDF |
| GB/T 42125.19-2022 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 19: Particular requirements for actuators of electrically controlled valves {译} 测量、控制和实验室用电气设备的安全要求 第19部分：电动控制阀门执行器的特殊要求 |
China National Standards valves, |
English PDF |
| GB/T 15623.3-2022 |
Hydraulic transmission - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves {译} 液压传动 电调制液压控制阀 第3部分：压力控制阀试验方法 |
China National Standards valves, |
English PDF |
| GB/T 14043.1-2022 |
Hydraulic transmission - Identification codes for valves - Part 1: Mounting surfaces and valve holes {译} 液压传动 阀的标识代号 第1部分：安装面和阀孔 |
China National Standards valves, |
English PDF |
| GB/T 40516-2021 |
Metal valves for use in marine J-flanged pipe face-to-face and centre-to-face dimensions J类船用法兰连接金属阀门的结构长度 |
China National Standards valves, |
English PDF |
| GB/T 40515-2021 |
Ships and marine technology—Globe valves for use in low temperature applications—Design and testing requirements 船舶和海上技术 船用超低温截止阀 设计与试验要求 |
China National Standards valves, |
English PDF |
| GB/T 38206.5-2021 |
Methods to assess the reliability of pneumatic components—Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves 气动元件可靠性评估方法 第5部分：止回阀、梭阀、双压阀（与阀）、单向节流阀及快排阀 |
China National Standards valves, |
English PDF |
| GB/T 15382-2021 |
General specifications of gas cylinder valves 气瓶阀通用技术要求 |
China National Standards valves, |
English PDF |
| GB/T 40079-2021 |
Classification system and qualification procedures for fugitive emission type testing of valves 阀门逸散性试验分类和鉴定程序 |
China National Standards valves, |
English PDF |
| GB/T 12243-2021 |
Spring loaded safety valves 弹簧直接载荷式安全阀 |
China National Standards valves, |
English PDF |
| GB/T 2877.2-2021 |
Hydraulic two-port slip-in cartridge valves—Part 2: Mounting dimensions 液压二通盖板式插装阀 第2部分：安装连接尺寸 |
China National Standards valves, |
English PDF |
| GB/T 39956.2-2021 |
Pneumatic fluid power—Electro-pneumatic pressure control valves—Part 2: Test methods to determine main characteristics to include in the supplier's literature 气动 电-气压力控制阀 第2部分：评定商务文件中应包含的主要特性的试验方法 |
China National Standards valves, |
English PDF |
| GB/T 39956.1-2021 |
Pneumatic fluid power—Electro-pneumatic pressure control valves—Part 1:Main characteristics to include in the supplier's literature 气动 电-气压力控制阀 第1部分：商务文件中应包含的主要特性 |
China National Standards valves, |
English PDF |
| GB/T 39831-2021 |
Hydraulic fluid power—Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10—Clamping dimensions 液压传动 规格02、03、05、07、08和10的四油口叠加阀和方向控制阀 夹紧尺寸 |
China National Standards valves, |
English PDF |
| GB/T 19672-2021 |
Pipeline valves—Technical specification 管线阀门 技术条件 |
China National Standards valves, |
English PDF |
| GB/T 12241-2021 |
Safety valves—General requirements 安全阀 一般要求 |
China National Standards valves, |
English PDF |
| GB/T 12237-2021 |
Steel ball valves for petroleum, petrochemical and allied industries 石油、石化及相关工业用的钢制球阀 |
China National Standards valves, |
English PDF |
| GB/T 41147-2021 |
Voltage sourced converter(VSC) valves for static synchronous compensator(STATCOM) -- Electrical testing 静止同步补偿装置用电压源换流器阀 电气试验 |
China National Standards valves, |
English PDF |
| GB/T 8100.3-2021 |
Mounting surfaces of hydraulic valves—Part 3: Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves 液压阀安装面 第3部分：减压阀、顺序阀、卸荷阀、节流阀和单向阀 |
China National Standards valves, |
English PDF |
| GB/T 8100.2-2021 |
Mounting surfaces of hydraulic valves—Part 2：Compensated flow-control valves 液压阀安装面 第2部分：调速阀 |
China National Standards valves, |
English PDF |
| GB/T 26024-2021 |
Seamless copper and copper alloys tube for valves on air-conditioning and refrigeration system 空调与制冷系统阀件用铜及铜合金无缝管 |
China National Standards valves, |
English PDF |
| GB/T 41004.2-2021 |
Intelligent pipe network system-Part 2 :Intelligent plastic pipes , fittings and valves 智能管网系统 第2部分：智能塑料管材、管件及阀门 |
China National Standards valves, |
English PDF |
| GB/T 18691.5-2021 |
Agricultural irrigation equipment -- Irrigation valves -- Part 5: Control valves 农业灌溉设备 灌溉阀 第5部分：控制阀 |
China National Standards valves, |
English PDF |
| GB/T 18691.4-2021 |
Agricultural irrigation equipment—Irrigation valves—Part 4: Air valves 农业灌溉设备 灌溉阀 第4部分：进排气阀 |
China National Standards valves, |
English PDF |
| GB/T 18691.3-2021 |
Agricultural irrigation equipment—Irrigation valves—Part 3: Check valves 农业灌溉设备 灌溉阀 第3部分：止回阀 |
China National Standards valves, |
English PDF |
| GB/T 18691.2-2021 |
Agricultural irrigation equipment—Irrigation valves—Part 2: Isolating valves 农业灌溉设备 灌溉阀 第2部分：隔离阀 |
China National Standards valves, |
English PDF |
| GB/T 18691.1-2021 |
Agricultural irrigation equipment—Irrigation valves—Part 1：General requirements 农业灌溉设备 灌溉阀 第1部分：通用要求 |
China National Standards valves, |
English PDF |
| GB/T 20818.21-2020 |
Industrial-process measurement and control—Data structures and elements in process equipment catalogues—Part 21: List of properties (LOP) for automated valves for electronic data exchange—Generic structures 工业过程测量和控制 过程设备目录中的数据结构和元素 第21部分：自动阀电子数据交换用属性列表(LOP) 通用结构 |
China National Standards valves, |
English PDF |
| GB/T 38599-2020 |
Safety valves and bursting disc safety devices in combination 安全阀与爆破片安全装置的组合 |
China National Standards valves, |
English PDF |
| GB/T 20995-2020 |
Static var compensators(SVC)—Testing of thyristor valves 静止无功补偿装置 晶闸管阀的试验 |
China National Standards valves, |
English PDF |
| GB/T 20990.1-2020 |
Thyristor valves for high voltage direct current (HVDC)power transmission—Part1: Electrical testing 高压直流输电晶闸管阀 第1部分：电气试验 |
China National Standards valves, |
English PDF |
| GB/T 12839-2020 |
Terms and definitions of tyre valves 轮胎气门嘴术语及其定义 |
China National Standards valves, |
English PDF |
| GB/T 39485-2020 |
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Manual gas valves 燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 手动燃气阀 |
China National Standards valves, |
English PDF |
| GB/T 22380.3-2019 |
Explosion protected safety technique of the petrol filling station—Part 3：Safety requirements for construction and performance of shear valves 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求 |
China National Standards valves, |
English PDF |
| GB/T 22380.3-2019 |
Explosion protected safety technique of the petrol filling station—Part 3：Safety requirements for construction and performance of shear valves 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求 |
China National Standards valves, |
English PDF |
| GB/T 38008-2019 |
Gate valves of thermoplastics materials 热塑性塑料闸阀 |
China National Standards valves, |
English PDF |
| GB/T 37992-2019 |
Safety and control devices for gas burners and gas-burning-appliances—Particular requirements—Vavle-proving systems for automatic shut-off valves 燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 自动截止阀的阀门检验系统 |
China National Standards valves, |
English PDF |
| GB/T 37842-2019 |
Ball valves of thermoplastics materials 热塑性塑料球阀 |
China National Standards valves, |
English PDF |
| GB/T 37499-2019 |
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Automatic and semi-automatic valves 燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 自动和半自动阀 |
China National Standards valves, |
English PDF |
| GB/T 37010-2018 |
Technical specification of converter valves for high-voltage direct current power transmission using voltage sourced converters 柔性直流输电换流阀技术规范 |
China National Standards valves, |
English PDF |
| GB/T 19278-2018 |
General terms and their definitions of thermoplastic pipes, fittings and valves 热塑性塑料管材、管件与阀门-通用术语及其定义 |
China National Standards valves, |
English PDF |
| GB/T 1796.7-2018 |
Tyre valves—Part 7:Components 轮胎气门嘴-第7部分:零部件 |
China National Standards valves, |
English PDF |
| GB/T 1796.6-2018 |
Tyre valves—Part 6:Cores 轮胎气门嘴-第6部分：气门芯 |
China National Standards valves, |
English PDF |
| GB/T 12225-2018 |
General purpose industrial valves—Specification of copper alloy castings 通用阀门 铜合金铸件技术条件 |
China National Standards valves, |
English PDF |
| GB/T 17213.14-2018 |
Industrial-process control valves—Part 8-2: Noise considerations—Laboratory measurement of noise generated by hydrodynamic flow through control valves 工业过程控制阀 第8-2部分：噪声的考虑 实验室内测量液动流流经控制阀产生的噪声 |
China National Standards valves, |
English PDF |
| GB/T 36559-2018 |
Thyristor valves for HVDC transmission 高压直流输电用晶闸管阀 |
China National Standards valves, |
English PDF |
| GB 5135.5-2018 |
Automatic sprinkler systems—Part 5: Deluge alarm valves 自动喷水灭火系统 第5部分：雨淋报警阀 |
China National Standards valves, |
English PDF |
| GB/T 36702.1-2018 |
Irrigation equipment—Safety devices for chemigation—Part 1: Small plastics valves for chemigation 灌溉设备 化学灌溉用安全装置 第1部分：化学灌溉用小型塑料阀 |
China National Standards valves, |
English PDF |
| GB/T 10868-2018 |
Steam converting valves for power station 电站减温减压阀 |
China National Standards valves, |
English PDF |
| GB 5135.6-2018 |
Automatic sprinkler systems—Part 6: Conventional valves 自动喷水灭火系统 第6部分：通用阀门 |
China National Standards valves, |
English PDF |
| GB/T 15623.1-2018 |
Hydraulic fluid power—Electrically modulated hydraulic control valves—Part 1: Test methods for four-port directional flow-control valves 液压传动 电调制液压控制阀 第1部分：四通方向流量控制阀试验方法 |
China National Standards valves, |
English PDF |
| GB/T 34878-2017 |
Vacuum technology—Valves—Leak test 真空技术 阀门 漏率测试 |
China National Standards valves, |
English PDF |
| GB/T 15623.2-2017 |
Hydraulic fluid power—Electrically modulated hydraulic control valves—Part 2: Test methods for three-port directional flow-control valves 液压传动 电调制液压控制阀 第2部分：三通方向流量控制阀试验方法 |
China National Standards valves, |
English PDF |
| GB/T 7934-2017 |
Hydraulic two-port slip-in cartridge valves—Technical requirements 液压二通盖板式插装阀 技术条件 |
China National Standards valves, |
English PDF |
| GB/T 7512-2017 |
valves for liquefied petroleum gas cylinders 液化石油气瓶阀 |
China National Standards valves, |
English PDF |
| GB/T 34387-2017 |
General function test method for valves used with refrigerant 制冷剂用阀门通用性能试验方法 |
China National Standards valves, |
English PDF |
| GB/T 34618-2017 |
Temperature detection method for judging internal leakage faults of working valves in steam drainage steam 蒸汽疏水系统在线阀门内漏温度检测方法 |
China National Standards valves, |
English PDF |
| GB/T 14536.19-2017 |
Automatic electrical controls for household and similar use—Particular requirements for electrically operated gas valves, including mechanical requirements 家用和类似用途电自动控制器 电动燃气阀的特殊要求，包括机械要求 |
China National Standards valves, |
English PDF |
| GB/T 35702.2-2017 |
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems—Part 2: Modular multilevel converters 高压直流系统用电压源换流器阀损耗 第2部分：模块化多电平换流器 |
China National Standards valves, |
English PDF |
| GB/T 35702.1-2017 |
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems—Part 1: General requirements 高压直流系统用电压源换流器阀损耗 第1部分：一般要求 |
China National Standards valves, |
English PDF |
| GB/T 1796.4-2017 |
Tyre valves－Part 4：Tubeless clamp-in valves 轮胎气门嘴 第4部分：压紧式无内胎气门嘴 |
China National Standards valves, |
English PDF |
| GB/T 35741-2017 |
Specification of stainless steel forgings for industrial valves 工业阀门用不锈钢锻件技术条件 |
China National Standards valves, |
English PDF |
| GB/T 35740-2017 |
Specification of nickel and nickel alloy castings for industrial valves 工业阀门用镍和镍基合金铸件技术条件 |
China National Standards valves, |
English PDF |
| GB/T 3036-2017 |
Marine centric-pivoted butterfly valves 船用中心型蝶阀 |
China National Standards valves, |
English PDF |
| GB/T 17213.2-2017 |
Industrial-process control valves—Part 2-1: Flow capacity—Sizing equations for fluid flow under installed conditions 工业过程控制阀 第2-1部分：流通能力 安装条件下流体流量的计算公式 |
China National Standards valves, |
English PDF |
| GB/T 17213.7-2017 |
Industrial-process control valves—Part 7: Control valve data sheet 工业过程控制阀 第7部分：控制阀数据单 |
China National Standards valves, |
English PDF |
| GB/T 17213.15-2017 |
Industrial-process control valves—Part 8-3: Noise considerations—Control valve aerodynamic noise prediction method 工业过程控制阀 第8-3部分：噪声的考虑 空气动力流流经控制阀产生的噪声预测方法 |
China National Standards valves, |
English PDF |
| GB/T 3037-2017 |
Marine duo-eccentric-pivoted butterfly valves 船用双偏心型蝶阀 |
China National Standards valves, |
English PDF |
| GB/T 1796.3-2017 |
Tyre valves—Part 3: Snap-in valves 轮胎气门嘴 第3部分：卡扣式气门嘴 |
China National Standards valves, |
English PDF |
| GB/T 35208-2017 |
Self-closing valves for LPG cylinders 自闭式液化石油气瓶阀 |
China National Standards valves, |
English PDF |
| GB/T 33348-2016 |
Voltage sourced converter valves for high-voltage direct current power transmission—Electrical testing 高压直流输电用电压源换流器阀 电气试验 |
China National Standards valves, |
English PDF |
| GB/T 33146-2016 |
valves for liquefied dimethyl ether cylinders 液化二甲醚瓶阀 |
China National Standards valves, |
English PDF |
| GB/T 32808-2016 |
Valves—Model designation method 阀门 型号编制方法 |
China National Standards valves, |
English PDF |
| GB/T 32807-2016 |
Pneumatic valves—Date to be included in supplier literature 气动阀 商务文件中应包含的资料 |
China National Standards valves, |
English PDF |
| GB/T 15185-2016 |
Flanged iron and copper ball valves 法兰连接铁制和铜制球阀 |
China National Standards valves, |
English PDF |
| GB/T 13932-2016 |
Cast iron swing check valves 铁制旋启式止回阀 |
China National Standards valves, |
English PDF |
| GB/T 9766.5-2016 |
Test method for tyre valves—Part 5: Test methods for large core chamber tyre valves 轮胎气门嘴试验方法 第5部分：大芯腔气门嘴试验方法 |
China National Standards valves, |
English PDF |
| GB/T 9766.4-2016 |
Test methods for tyre valves—Part 4: Test methods for tubeless clamp-in valves 轮胎气门嘴试验方法 第4部分：压紧式无内胎气门嘴试验方法 |
China National Standards valves, |
English PDF |
| GB/T 9766.3-2016 |
Test method for tyre valves—Part 3: Test methods for Snap-in valves 轮胎气门嘴试验方法 第3部分：卡扣式气门嘴试验方法 |
China National Standards valves, |
English PDF |
| GB/T 9766.2-2016 |
Test method for tyre valves—Part 2: Rubber base valves test methods 轮胎气门嘴试验方法 第2部分：胶座气门嘴试验方法 |
China National Standards valves, |
English PDF |
| GB/T 1796.5-2016 |
Tyre valves—Part 5: Tyre valves for large core chamber 轮胎气门嘴 第5部分：大芯腔气门嘴 |
China National Standards valves, |
English PDF |
| GB/T 1796.2-2016 |
Tyre valves—Part 2: Rubber base valves 轮胎气门嘴 第2部分：胶座气门嘴 |
China National Standards valves, |
English PDF |
| GB/T 1796.1-2016 |
Tyre valves—Part 1: Tube clamp-in valves 轮胎气门嘴 第1部分：压紧式内胎气门嘴 |
China National Standards valves, |
English PDF |
| GB/T 32516-2016 |
Thyristor valves of multistage controlled shunt reactors in extra high-voltage transmission systems 超高压分级式可控并联电抗器晶闸管阀 |
China National Standards valves, |
English PDF |
| GB/T 9766.1-2015 |
Test method for tyre valves—Part 1: Test method for tube clamp-in valves 轮胎气门嘴试验方法 第1部分：压紧式内胎气门嘴试验方法 |
China National Standards valves, |
English PDF |
| GB/T 32337-2015 |
Pneumatic fluid power—Mounting interface surfaces of 3/2 solenoid valves 气动 二位三通电磁阀安装面 |
China National Standards valves, |
English PDF |
| GB/T 32291-2015 |
Offline inspection and evaluation of high and super-high pressure safety valves 高压超高压安全阀离线校验与评定 |
China National Standards valves, |
English PDF |
| GB/T 32290-2015 |
Reduced-wall,Resilient-seated gate valves for water supply service 供水系统用弹性密封轻型闸阀 |
China National Standards valves, |
English PDF |
| GB/T 32215-2015 |
Pneumatic fluid power—Identification of ports and control mechanisms of control valves and other components 气动 控制阀和其他元件的气口和控制机构的标识 |
China National Standards valves, |
English PDF |
| GB/T 17213.8-2015 |
Industrial-process control valves—Part 8-1: Noise considerations—Laboratory measurement of noise generated by aerodynamic flow through control valves 工业过程控制阀 第8-1部分：噪声的考虑 实验室内测量空气动力流流经控制阀产生的噪声 |
China National Standards valves, |
English PDF |
| GB/T 17213.4-2015 |
Industrial-process control valves—Part 4: Inspection and routine testing 工业过程控制阀 第4部分：检验和例行试验 |
China National Standards valves, |
English PDF |
| GB/T 17213.18-2015 |
Industrial-process control valves—Part 9: Test procedure for response measurements from step inputs 工业过程控制阀 第9部分: 阶跃输入响应测量的试验程序 |
China National Standards valves, |
English PDF |
| GB/T 17213.16-2015 |
Industrial-process control valves—Part 8-4: Noise considerations—Prediction of noise generated by hydrodynamic flow 工业过程控制阀 第8-4部分：噪声的考虑 液动流流经控制阀产生的噪声预测方法 |
China National Standards valves, |
English PDF |
| GB/T 17213.1-2015 |
Industrial-process control valves—Part 1: Control valve terminology and general considerations 工业过程控制阀 第1部分：控制阀术语和总则 |
China National Standards valves, |
English PDF |
| GB/T 17213.10-2015 |
Industrial-process control valves—Part 2-4: Flow capacity—Inherent flow characteristics and rangeability 工业过程控制阀 第2-4部分：流通能力 固有流量特性和可调比 |
China National Standards valves, |
English PDF |
| GB/T 12224-2015 |
General requirements for industrial steel valves 钢制阀门 一般要求 |
China National Standards valves, |
English PDF |
| GB/T 7274-2015 |
Methods for the measurement of direct inter-electrode capacitances of electronic tubes and valves 电子管极间电容测试方法 |
China National Standards valves, |
English PDF |
| GB/T 592-2015 |
Marine cast iron flanged check valves 船用法兰铸铁止回阀 |
China National Standards valves, |
English PDF |
| GB/T 589-2015 |
Marine bronze flanged check valves 船用法兰青铜止回阀 |
China National Standards valves, |
English PDF |
| GB/T 586-2015 |
Marine cast steel flanged check valves 船用法兰铸钢止回阀 |
China National Standards valves, |
English PDF |
| GB/T 1952-2015 |
Marine low pressure bronze male threaded check valves 船用低压外螺纹青铜止回阀 |
China National Standards valves, |
English PDF |
| GB/T 12220-2015 |
Induatrial valves—Marking 工业阀门 标志 |
China National Standards valves, |
English PDF |
| GB/T 31487.2-2015 |
Direct current de-icing devices—Part 2：Thyristor valves 直流融冰装置 第2部分：晶闸管阀 |
China National Standards valves, |
English PDF |
| GB/T 31013-2014 |
Acoustics―Acoustic insulation for pipes,valves and flanges 声学 管道、阀门和法兰的隔声 |
China National Standards valves, |
English PDF |
| GB/T 30832-2014 |
Valves―Test method of flow coefficient and flow resistance coefficient 阀门 流量系数和流阻系数试验方法 |
China National Standards valves, |
English PDF |
| GB/T 30818-2014 |
Fully welded body ball valves for pipeline transportation systems in petroleum and natural gas industries 石油和天然气工业管线输送系统用全焊接球阀 |
China National Standards valves, |
English PDF |
| GB/T 3032-2014 |
Marks for marine piping valves and fittings 船用阀门及管路附件的标志 |
China National Standards valves, |
English PDF |
| GB/T 6809.2-2013 |
Reciprocating internal combustion engines—Vocabulary of components and systems—Part 2: Valves,camshaft drives and actuating mechanisms 往复式内燃机 零部件和系统术语 第2部分：气门、凸轮轴传动和驱动机构 |
China National Standards valves, |
English PDF |
| GB/T 30210-2013 |
Aircraft―High pressure air charging valves 飞机 高压空气充气阀 |
China National Standards valves, |
English PDF |
| GB/T 20173-2013 |
Petroleum and natural gas industries―Pipeline transportation systems―Pipeline valves 石油天然气工业 管道输送系统 管道阀门 |
China National Standards valves, |
English PDF |
| GB/Z 30424-2013 |
Design guidelines of thyristor valves for high voltage direct current（HVDC）power transmission 高压直流输电晶闸管阀设计导则 |
China National Standards valves, |
English PDF |
| GB/T 30425-2013 |
Water cooling equipment for converter valves for high voltage direct current（HVDC）power transmission 高压直流输电换流阀水冷却设备 |
China National Standards valves, |
English PDF |
| GB/T 29528-2013 |
Specification of copper alloy forgings for valves 阀门用铜合金锻件技术条件 |
China National Standards valves, |
English PDF |
| GB/T 20173-2013 |
Petroleum and natural gas industries―Pipeline transportation systems―Pipeline valves 石油天然气工业 管道输送系统 管道阀门 |
China National Standards valves, |
English PDF |
| GB/T 8107-2012 |
Hydraulic fluid power-valves - Determination of pressure differential/flow characteristics 液压阀 压差-流量特性的测定 |
China National Standards valves, |
English PDF |
| GB/T 12839-2012 |
Terms and definitions of tyre valves 轮胎气门嘴术语及其定义 |
China National Standards valves, |
English PDF |
| GB/T 19699-2012 |
Ships and marine technology - Pressure/vacuum valves for cargo tanks 船舶与海上技术 液货舱压力/真空阀 |
China National Standards valves, |
English PDF |
| GB/T 18688-2012 |
Agricultural irrigation equipment - Pressure losses in irrigation valves - Test method 农业灌溉设备 灌溉阀的压力损失 试验方法 |
China National Standards valves, |
English PDF |
| GB/T 19794-2012 |
Agricultural irrigation equipment - Volumetric valves - General requirements and test methods 农业灌溉设备 定量阀 技术要求和试验方法 |
China National Standards valves, |
English PDF |
| GB/T 28778-2012 |
Pilot-operated safety valves 先导式安全阀 |
China National Standards valves, |
English PDF |
| GB/T 15623.3-2012 |
Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves 液压传动 电调制液压控制阀 第3部分：压力控制阀试验方法 |
China National Standards valves, |
English PDF |
| GB/T 28572-2012 |
Series of large and medium inletvalves of hydraulic turbine 大中型水轮机进水阀门系列 |
China National Standards valves, |
English PDF |
| GB/T 28563-2012 |
Electrical testing of thyristor valves for ±800kV ultra high voltage direct current (UHVDC) power transmission ±800kV特高压直流输电用晶闸管阀电气试验 |
China National Standards valves, |
English PDF |
| GB/T 28494-2012 |
Globe valves of thermoplastics materials 热塑性塑料截止阀 |
China National Standards valves, |
English PDF |
| GB/T 14478-2012 |
Fundamental technical requirements for large and medium inlet valves of hydraulic turbine 大中型水轮机进水阀门基本技术条件 |
China National Standards valves, |
English PDF |
| GB/T 27734-2011 |
Polypropylene（PP）valves for pipes under pressure - Basic dimensions - Metric series 压力管道用聚丙烯（PP）阀门 基本尺寸 公制系列 |
China National Standards valves, |
English PDF |
| GB/T 27726-2011 |
Thermoplastics valves - Pressure test methods and requirements 热塑性塑料阀门压力试验方法及要求 |
China National Standards valves, |
English PDF |
| GB/T 27725-2011 |
Butterfly valves of thermoplastics materials 热塑性塑料蝶阀 |
China National Standards valves, |
English PDF |
| GB/T 10002.3-2011 |
valves made of unplasticized poly(vinyl chloride)(PVC-U)for water supply 给水用硬聚氯乙烯（PVC-U）阀门 |
China National Standards valves, |
English PDF |
| GB 5135.17-2011 |
Automatic sprinkler system - Part 17：Pressure reducing valves 自动喷水灭火系统 第17部分：减压阀 |
China National Standards valves, |
English PDF |
| GB 26640-2011 |
Specification for minimal thickness of the shell of valves 阀门壳体最小壁厚尺寸要求规范 |
China National Standards valves, |
English PDF |
| GB/T 26482-2011 |
Fire type-testing requirement for check valves 止回阀 耐火试验 |
China National Standards valves, |
English PDF |
| GB/T 26479-2011 |
Fire test for soft-seated quarter-turn valves 弹性密封部分回转阀门 耐火试验 |
China National Standards valves, |
English PDF |
| GB/T 26478-2011 |
Globe valves for ammonia and lift check valves 氨用截止阀和升降式止回阀 |
China National Standards valves, |
English PDF |
| GB/T 18691.5-2011 |
Agricultural irrigation equipment - Irrigation valves - Part 5: Control valves 农业灌溉设备 灌溉阀 第5部分：控制阀 |
China National Standards valves, |
English PDF |
| GB/T 18691.4-2011 |
Agricultural irrigation equipment - Irrigation valves - Part 4: Air valves 农业灌溉设备 灌溉阀 第4部分：进排气阀 |
China National Standards valves, |
English PDF |
| GB/T 18691.3-2011 |
Agricultural irrigation equipment - Irrigation valves - Part 3: Check valves 农业灌溉设备 灌溉阀 第3部分：止回阀 |
China National Standards valves, |
English PDF |
| GB/T 18691.2-2011 |
Agricultural irrigation equipment - Irrigation valves - Part 2: Isolating valves 农业灌溉设备 灌溉阀 第2部分：隔离阀 |
China National Standards valves, |
English PDF |
| GB/T 18691.1-2011 |
Agricultural irrigation equipment - Irrigation valves - Part 1: General requirements 农业灌溉设备 灌溉阀 第1部分：通用要求 |
China National Standards valves, |
English PDF |
| GB/T 26142.2-2010 |
Pneumatic fluid power - Five-port directional control valves,sizes 18mm and 26mm - Part 2: Mounting interface surfaces with optional electrical connector 气动五通方向控制阀 规格18mm和26mm 第2部分:带可选电气接头的安装面 |
China National Standards valves, |
English PDF |
| GB/T 26142.1-2010 |
Pneumatic fluid power - Five-port directional control valves,sizes 18mm and 26mm - Part 1: Mounting interface surfaces without electrical connector 气动五通方向控制阀 规格18mm和26mm 第1部分：不带电气接头的安装面 |
China National Standards valves, |
English PDF |
| GB/T 17213.17-2010 |
Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery 工业过程控制阀 第2-5部分：流通能力 流体流经级间恢复多级控制阀的计算公式 |
China National Standards valves, |
English PDF |
| GB/T 26024-2010 |
Seamless copper and copper alloys tube for valves on air-conditioning and refrigeration system 空调与制冷系统阀件用铜及铜合金无缝管 |
China National Standards valves, |
English PDF |
| GB 25974.3-2010 |
Powered support for coal mine - Part 3：The hydraulic control system and valves 煤矿用液压支架 第3部分：液压控制系统及阀 |
China National Standards valves, |
English PDF |
| GB/T 25739-2010 |
Technical guideline of valves commissioning for nuclear power plant 核电厂阀门调试技术导则 |
China National Standards valves, |
English PDF |
| GB 22380.3-2010 |
Explosion protected safety technique of the petrol filling station - Part 3: Safety requirements for construction and performance of shear valves 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求 |
China National Standards valves, |
English PDF |
| GB/T 24924-2010 |
Resilient-seated gate valves for water supply service 供水系统用弹性密封闸阀 |
China National Standards valves, |
English PDF |
| GB/T 24921.2-2010 |
Sizing,selection,and installation of pressure relieving valves for petrochemical industries - Part 2: Installation 石化工业用压力释放阀的尺寸确定、选型和安装 第2部分：安装 |
China National Standards valves, |
English PDF |
| GB/T 24921.1-2010 |
Sizing,selection and installation of pressure reliev valves for petrochemical industries - Part 1: Sizing and selection 石化工业用压力释放阀的尺寸确定、选型和安装 第1部分：尺寸的确定和选型 |
China National Standards valves, |
English PDF |
| GB/T 24920-2010 |
Steel pressure relirf valves for petrochemical industries 石化工业用钢制压力释放阀 |
China National Standards valves, |
English PDF |
| GB/T 24919-2010 |
Installation, operation, maintenance of industrial valves - General requirements 工业阀门 安装使用维护 一般要求 |
China National Standards valves, |
English PDF |
| GB/T 14087-2010 |
Safety valves for marine air vessel 船用空气瓶安全阀 |
China National Standards valves, |
English PDF |
| GB 1796.7-2009 |
Tyre valves - Part 7:Components 轮胎气门嘴 第7部分：零部件 |
China National Standards valves, |
English PDF |
| GB 1796.5-2009 |
Tyre valves - Part 5: Tyre valves for large core chamber 轮胎气门嘴 第5部分：大芯腔气门嘴 |
China National Standards valves, |
English PDF |
| GB 1796.4-2009 |
Tyre valves - Part 4: Clamp-in valves 轮胎气门嘴 第4部分：压紧式无内胎气门嘴 |
China National Standards valves, |
English PDF |
| GB/T 9766.7-2009 |
Test method for tyre valves - Part 7: Components test methods 轮胎气门嘴试验方法 第7部分：零部件试验方法 |
China National Standards valves, |
English PDF |
| GB/T 9766.5-2009 |
Test method for tyre valve - Part 5: Tyre valves for large core chamber test methods 轮胎气门嘴试验方法 第5部分：大芯腔气门嘴试验方法 |
China National Standards valves, |
English PDF |
| GB/T 9766.4-2009 |
Test method for tyre valve - Part 4: Clamp-in tubeless valves test methods 轮胎气门嘴试验方法 第4部分：压紧式无内胎气门嘴试验方法 |
China National Standards valves, |
English PDF |
| GB/T 18689-2009 |
Agricultural irrigation equipment－ Manually operated small plastics valves 农业灌溉设备 小型手动塑料阀 |
China National Standards valves, |
English PDF |
| GB 15382-2009 |
General specifications of gas cylinder valves 气瓶阀通用技术要求 |
China National Standards valves, |
English PDF |
| GB 10879-2009 |
valves for dissolved acetylene cylinders 溶解乙炔气瓶阀 |
China National Standards valves, |
English PDF |
| GB/T 588-2009 |
Marine bronze flanged stop check valves 船用法兰青铜截止止回阀 |
China National Standards valves, |
English PDF |
| GB/T 23337-2009 |
Internal combustion engines - Intake and exhaust valves - Specification 内燃机 进、排气门 技术条件 |
China National Standards valves, |
English PDF |
| GB/T 23300-2009 |
Parallel plane disc gate valves 平板闸阀 |
China National Standards valves, |
English PDF |
| GB/T 13852-2009 |
General specification of hydraulic control valves for ship 船用液压控制阀技术条件 |
China National Standards valves, |
English PDF |
| GB 14536.21-2008 |
Automatic electrical controls for household and similar use - Particular requirements for electrically operated oil valves, including mechanical requirements 家用和类似用途电自动控制器 电动油阀的特殊要求, 包括机械要求 |
China National Standards valves, |
English PDF |
| GB/T 8464-2008 |
Cast iron and copper valves with screwed connections 铁制和铜制螺纹连接阀门 |
China National Standards valves, |
English PDF |
| GB/T 22652-2008 |
Overlaying-welding procedure qualification for valves sealing face 阀门密封面堆焊工艺评定 |
China National Standards valves, |
English PDF |
| GB/T 13927-2008 |
Industrial valves - Pressure testing 工业阀门 压力试验 |
China National Standards valves, |
English PDF |
| GB/T 12239-2008 |
Industrial valves - Diaphragm valves made of metallic materials 工业阀门 金属隔膜阀 |
China National Standards valves, |
English PDF |
| GB/T 12238-2008 |
Flanged and wafer resilient seal butterfly valves 法兰和对夹连接弹性密封蝶阀 |
China National Standards valves, |
English PDF |
| GB 15558.3-2008 |
Buried polyethylene（PE）piping systems for the supply of gaseous fuels - Part 3: Valves 燃气用埋地聚乙烯(PE)管道系统 第3部分：阀门 |
China National Standards valves, |
English PDF |
| GB/T 596-2008 |
Marine bronze male thread stop-check valves 船用外螺纹青铜截止止回阀 |
China National Standards valves, |
English PDF |
| GB/T 587-2008 |
Marine bronze flanged stop valves 船用法兰青铜截止阀 |
China National Standards valves, |
English PDF |
| GB/T 584-2008 |
Marine cast steel flanged stop valves 船用法兰铸钢截止阀 |
China National Standards valves, |
English PDF |
| GB/T 1951-2008 |
Marine low pressure bronze male threaded stop valves 船用低压外螺纹青铜截止阀 |
China National Standards valves, |
English PDF |
| GB 14536.9-2008 |
Automatic electrical controls for household and similar use - Particular requirements for electrically operated water valves, including mechanical requirements 家用和类似用途电自动控制器 电动水阀的特殊要求(包括机械要求) |
China National Standards valves, |
English PDF |
| GB 1796.6-2008 |
Tyre valves - Part 6: Cores 轮胎气门嘴 第6部分：气门芯 |
China National Standards valves, |
English PDF |
| GB 1796.3-2008 |
Tyre valves - Part 3: Snap-in valves 轮胎气门嘴 第3部分：卡扣式气门嘴 |
China National Standards valves, |
English PDF |
| GB 1796.2-2008 |
Tyre valves - Part 2: Rubber base valves 轮胎气门嘴 第2部分：胶座气门嘴 |
China National Standards valves, |
English PDF |
| GB 1796.1-2008 |
Tyre valves - Part 1: Clamp-in valves 轮胎气门嘴 第1部分：压紧式内胎气门嘴 |
China National Standards valves, |
English PDF |
| GB/T 591-2008 |
Marine cast iron flanged stop check valves 船用法兰铸铁截止止回阀 |
China National Standards valves, |
English PDF |
| GB/T 590-2008 |
Marine cast iron flanged stop valves 船用法兰铸铁截止阀 |
China National Standards valves, |
English PDF |
| GB/T 585-2008 |
Marine cast steel flanged stop check valves 船用法兰铸钢截止止回阀 |
China National Standards valves, |
English PDF |
| GB/T 1953-2008 |
Marine low pressure bronze male threaded stop check valves 船用低压外螺纹青铜截止止回阀 |
China National Standards valves, |
English PDF |
| GB/T 1852-2008 |
Marine cast steel flanged steam pressure reducing valves 船用法兰铸钢蒸汽减压阀 |
China National Standards valves, |
English PDF |
| GB/T 1850-2008 |
Marine male threaded weight quick-closing valves 船用外螺纹重块式快关阀 |
China National Standards valves, |
English PDF |
| GB/T 600-2008 |
General specifications for marine piping valves and fittings 船舶管路阀件通用技术条件 |
China National Standards valves, |
English PDF |
| GB/T 595-2008 |
Marine bronze male thread stop valves 船用外螺纹青铜截止阀 |
China National Standards valves, |
English PDF |
| GB/T 11698-2008 |
Metal valves for use in marine flanged pipe systems - Face-to-face and center-to-face dimensions 船用法兰连接金属阀门的结构长度 |
China National Standards valves, |
English PDF |
| GB/T 4213-2008 |
Pneumatic industrial process control valves 气动调节阀 |
China National Standards valves, |
English PDF |
| Find out:280Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
