Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| DL/T 1127-2023 |
Plasma Ignition system design and operation guidelines {译} 等离子体点火系统设计与运行导则 |
China Electricity Industry
Standards Ignition |
 English PDF |
| HG/T 6165-2023 |
Automobile engine Ignition coil rubber sheath {译} 汽车发动机点火线圈橡胶护套 |
China Chemistry Industry
Standards Ignition |
English PDF |
| JB/T 9865-2021 |
Ignition coil for magneto {译} 磁电机用点火线圈 |
China Machinery Industry
Standards Ignition |
English PDF |
| JB/T 6730-2021 |
Magneto Ignition System Test Methods {译} 磁电机点火系统 测试方法 |
China Machinery Industry
Standards Ignition |
English PDF |
| YS/T 575.19-2021 |
Methods for chemical analysis of bauxite ores - Part 19: Determination of loss on Ignition - Gravimetric method {译} 铝土矿石化学分析方法 第19部分：灼减量的测定 重量法 |
China Non-ferrous Metal Industry
Standards Ignition |
English PDF |
| SJ/T 3328.3-2016 |
(Determination of high purity quartz sand Part 3 loss on Ignition of electronic products) 电子产品用高纯石英砂 第3部分 灼烧失量的测定 |
China Electronics
Standards Ignition |
English PDF |
| QC/T 16-2016 |
(Automotive Ignition coils) 汽车用点火线圈 |
China Automobile & Vehicle industry
Standards Ignition |
English PDF |
| SY/T 6319-2016 |
Protection against Ignitions arising out of static, lighting and stray currents 防止静电、雷电和杂散电流引燃的措施 |
China Oil & Gas Industry
Standards Ignition |
English PDF |
| NB/SH/T 0899-2015 |
Standard test method for measurement of effects of automotive engine oils on fuel economy of passenger cars and light-duty trucks in sequence VIB spark Ignition engine 汽车发动机油节能性能的评定 程序ⅵb法 |
China Energy industry
Standards Ignition |
English PDF |
| NB/SH/T 0898-2015 |
Standard test method for evaluation of automotive engine oils for inhibition of deposit formation in a spark-Ignition internal combustion engine fueled with gasoline and operated under low-temperature, light-duty conditions 汽车发动机油低温油泥性能的评定 程序ⅴg法 |
China Energy industry
Standards Ignition |
English PDF |
| NB/SH/T 0897-2015 |
Standard test method for evaluation of automotive engine oils in the sequence IVA spark-Ignition engine 汽车发动机油性能的评定 程序ⅳa法 |
China Energy industry
Standards Ignition |
English PDF |
| NB/SH/T 0896-2015 |
Standard test method for evaluation of automotive engine oils in the sequence ⅢG spark-Ignition engine 汽车发动机油性能的评定 程序ⅲg法 |
China Energy industry
Standards Ignition |
English PDF |
| HJ 761-2015 |
Solid waste. Determination of organic matter. Ignition loss method 固体废物 有机质的测定 灼烧减量法 |
China Environmental Protection Industry
Standards Ignition |
English PDF |
| DL/T 1446-2015 |
(Determination of pulverized coal Ignition temperature) 煤粉气流着火温度的测定方法 |
China Electricity & Power
Standards Ignition |
English PDF |
| QC/T 628-2014 |
Steering lock with Ignition switch for vehicle 汽车用带点火开关的转向锁 |
China Automobile & Vehicle industry
Standards Ignition |
English PDF |
| NB/SH/T 0883-2014 |
Standard test method for determination of Ignition delay and derived cetane number of diesel fbel oil by combustion in a constant volanse chamber 柴油着火滞后期和导出十六烷值的测定 等容燃烧室法 |
China Energy industry
Standards Ignition |
English PDF |
| DL/T 1316-2014 |
Guide on design and operation of Ignition system with less oil for pulverized coal-fired power boilers 火力发电厂煤粉锅炉少油点火系统设计与运行导则 |
China Electricity & Power
Standards Ignition |
English PDF |
| DL/T 1151.4-2012 |
Analytical methods of scale and corrosion products in power plants. Part 4: Determination of the loss (increase) on Ignition 火力发电厂垢和腐蚀产物分析方法 第4部分：灼烧减(增)量的测定 |
China Electricity & Power
Standards Ignition |
English PDF |
| YY/T 0855.2-2011 |
Test method and classification for the laser resistance of surgical drapes and/or patient protective covers. Part 2: Secondary Ignition 手术单和/或病人防护覆盖物抗激光试验方法和分类 第2部分：次级点燃 |
China Medicine & Medical Device
Standards Ignition |
English PDF |
| YY/T 0855.1-2011 |
Test method and classification for the laser resistance of surgical drapes and/or patient protective covers. Part 1: Primary Ignition and penetration 手术单和/或病人防护覆盖物抗激光试验方法和分类 第1部分：初级点燃和穿透 |
China Medicine & Medical Device
Standards Ignition |
English PDF |
| HG/T 3533-2011 |
Industrial circulating cooling water. Determination of Ignition-loss for sludge and corrosion products 工业循环冷却水污垢和腐蚀产物中灼烧失重测定方法 |
China Chemical Industry
Standards Ignition |
English PDF |
| SN/T 2925-2011 |
Methods of test for assessment of the ignitability of upholstered furniture. Ignition source:smoudering cigarette and match-flame equivalent 软体家具耐点燃性试验方法及评价 点火源：阴燃香烟和等同火柴火焰 |
China Import Export Inspection
Standards Ignition |
English PDF |
| SN/T 0065.2-2011 |
Method for determination of europium-rich,yttrium-rich,Sm-Eu-Gd oxides for import and export. Part 2: Determination of Ignition loss 进出口富铕、富钇、钐铕钆氧化物测定方法 第2部分：灼减量的测定 |
China Import Export Inspection
Standards Ignition |
English PDF |
| SY/T 6515-2010 |
Ignition risk of hydrocarbon liquids and vapors by hot surfaces in the open air 露天热表面引燃液态烃类及其蒸气的风险评价 |
China Oil & Gas Industry
Standards Ignition |
English PDF |
| DL/T 1127-2010 |
Guide for design and operation of plasma Ignition system 等离子体点火系统设计与运行导则 |
China Electricity & Power
Standards Ignition |
English PDF |
| AQ 2016-2008 |
Specification for Ignition time of out of control on wellhead of natural gas well involving hydrogen sulfide 含硫化氢天然气井失控井口点火时间规定 |
China Safety & Security
Standards Ignition |
English PDF |
| SN/T 1797.5-2008 |
Technical regulation on safety and sanitation for inspection of iron ore. Part 5: Loss on Ignition for quality evaluation 铁矿石安全卫生检验技术规范 第5部分:质量评价 灼烧减量 |
China Import Export Inspection
Standards Ignition |
English PDF |
| HJ 439-2008 |
In-service conformity of compression Ignition and gas fuelled positive ignition engines of vehicles 车用压燃式、气体燃料点燃式发动机与汽车在用符合性技术要求 |
China Environmental Protection Industry
Standards Ignition |
English PDF |
| HJ 438-2008 |
Durability of Emission Control Systems of compression Ignition and gas fuelled positive ignition engines of vehicles 车用压燃式、气体燃料点燃式发动机与汽车排放控制系统耐久性技术要求 |
China Environmental Protection Industry
Standards Ignition |
English PDF |
| HJ 437-2008 |
Technical specification for on-board diagnostic(OBD) system of compression Ignition and gas fuelled positive ignition engines of vehicles 车用压燃式、气体燃料点燃式发动机与汽车车载诊断(obd)系统技术要求 |
China Environmental Protection Industry
Standards Ignition |
English PDF |
| HG/T 3066-2008 |
Rubber compounding ingredients. Silica, precipitated, hydrated. Determination of loss on Ignition on dried sample 橡胶配合剂 沉淀水合二氧化硅 干燥样品灼烧减量的测定 |
China Chemical Industry
Standards Ignition |
English PDF |
| HJ/T 396-2007 |
Equipment specifications and quality control requirements for in-use vehicles with Ignition engine exhaust emission test in transient loaded mode 点燃式发动机汽车瞬态工况法排气污染物测量设备技术要求 |
China Environmental Protection Industry
Standards Ignition |
English PDF |
| HJ/T 395-2007 |
Equipment specifications and quality control requirements for In-use vehicles equipped with compression Ignition engine in free accelerating smoke test 压燃式发动机汽车自由加速法排气烟度测量设备技术要求 |
China Environmental Protection Industry
Standards Ignition |
English PDF |
| QC/T 785-2007 |
Road vehicles. Two-stage fuel filters for compression-Ignition engines. Mounting and connecting dimensions 汽车 柴油机 双级燃油滤清器 安装和连接尺寸 |
China Automobile & Vehicle industry
Standards Ignition |
English PDF |
| SH/T 0797-2007 |
Standard test method for determination of benzene in spark-Ignition engine fuels using mid infrared spectroscopy 点燃式发动机燃料中苯含量的测定 中红外光谱法 |
China Petrochemical Industry
Standards Ignition |
English PDF |
| QC/T 767-2006 |
Road vehicles. Spin-on fuel filters for combustion-Ignition engines. Mounting and dimensions 汽车 柴油机旋装式燃油滤清器 安装和连接尺寸 |
China Automobile & Vehicle industry
Standards Ignition |
English PDF |
| SH/T 0788-2006 |
Standard test method for evaluation of automotive engine oils in the sequence Ⅷ spark-Ignition engine (CLR oil test engine) 内燃机油高温氧化和轴瓦腐蚀评定法（程序Ⅷ法） |
China Petrochemical Industry
Standards Ignition |
English PDF |
| HJ/T 241-2005 |
The principle and method of confirm limits for exhaust smoke from lug-down mode for in-use motor vehicles with C.I.E. (compression Ignition engine) 确定压燃式发动机在用汽车加载减速法排气烟度排放限值的原则和方法 |
China Environmental Protection Industry
Standards Ignition |
English PDF |
| HJ/T 240-2005 |
The principle and method of confirm limits for exhaust pollutants from in-use vehicle equipped Ignition engine under simple driving mode conditions 确定点燃式发动机在用汽车简易工况法排气污染物排放限值的原则和方法 |
China Environmental Protection Industry
Standards Ignition |
English PDF |
| HJ/T 241-2005 |
Principles and methods for determining the exhaust smoke emission limits of compression Ignition engines in the vehicle loading and deceleration method {译} 确定压燃式发动机在用汽车加载减速法排气烟度排放限值的原则和方法 |
China Environment Industry
Standards Ignition |
English PDF |
| HJ/T 240-2005 |
Principles and methods for determining the emission limits of exhaust pollutants by the simple working condition method of Ignition engines in use {译} 确定点燃式发动机在用汽车简易工况法排气污染物排放限值的原则和方法 |
China Environment Industry
Standards Ignition |
English PDF |
| HG/T 2956.8-2001 |
Ascharite ores. Determination of loss on Ignition. Gravimetric method 硼镁矿石中灼烧失量的测定 重量法 |
China Chemical Industry
Standards Ignition |
English PDF |
| DL/T 706-1999 |
Test method for autoIgnition temperature of fire-resistant fluid used for power plant 电厂用抗燃油自燃点测定方法 |
China Electricity & Power
Standards Ignition |
English PDF |
| HJ 54-2000 |
Measurement method of exhaust pollutants of vehicle compression Ignition engine {译} 车用压燃式发动机排气污染物测量方法 |
China Environment Industry
Standards Ignition |
English PDF |
| QC/T 416-1999 |
(Ignition System Test Method) 点火系统的测试方法 |
China Automobile & Vehicle industry
Standards Ignition |
English PDF |
| QC/T 504-1999 |
(Automotive Ignition switch technical conditions) 汽车用点火开关技术条件 |
China Automobile & Vehicle industry
Standards Ignition |
English PDF |
| QC/T 438-1999 |
(Automotive Ignition system high pressure plastic parts technical conditions) 汽车点火系高压塑料件技术条件 |
China Automobile & Vehicle industry
Standards Ignition |
English PDF |
| QC/T 429-1999 |
(High-energy Ignition device Model methodology) 高能点火装置产品型号编制方法 |
China Automobile & Vehicle industry
Standards Ignition |
English PDF |
| QB/T 2365-1998 |
General technical requirements for pulse-Ignition controllers in domestic gas appliances 家用燃气用具脉冲点火控制器通用技术要求 |
China Light Industry
Standards Ignition |
English PDF |
| SH/T 0647-1997 |
Lubricants test method for evaluating preIgnition tendency of water-cooled two-stroke gasoline engine 水冷二冲程汽油机油早燃倾向评定法 |
China Petrochemical Industry
Standards Ignition |
English PDF |
| SH/T 0642-1997 |
Petroleum and petrochemical products. Determination of autoIgnition temperature 液体石油和石油化工产品自燃点测定法 |
China Petrochemical Industry
Standards Ignition |
English PDF |
| SJ 20476.2-1995 |
Detail specification for gas discharge tubes for high energy Ignition of type R2100 R2100型高能点火气体放电管详细规范 |
China Electronics
Standards Ignition |
English PDF |
| SJ 20476.1-1995 |
Detail specification for gas discharge tubes for high energy Ignition of type R2400A R2400A型高能点火气体放电管详细规范 |
China Electronics
Standards Ignition |
English PDF |
| SH/T 0129-1992 |
(Petroleum waxes and petroleum grease residue on Ignition test method) 石油蜡和石油脂灼烧残渣试验法 |
China Petrochemical Industry
Standards Ignition |
English PDF |
| QCN 29011-1991 |
(Automotive Ignition wire connectors. Type, size and technical requirements) 汽车用点火线电线接头.型式、尺寸和技术要求 |
China Automobile & Vehicle industry
Standards Ignition |
English PDF |
| QC/T 29011-1991 |
(Automotive Ignition wire connector type, size and technical requirements) 汽车用点火线电线接头型式、尺寸和技术要求 |
China Automobile & Vehicle industry
Standards Ignition |
English PDF |
| Find out:56Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
