Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| JB/T 14212-2023 |
forging Dies Two-roller Cross Wedge Rolling Dies Technical Specifications {译} 锻模 两辊式楔横轧模 技术规范 |
China Machinery Industry
Standards forging |
 English PDF |
| JB/T 14361-2023 |
Technical specifications for large ring forgings of yaw ring gears for wind turbines above 2.5MW {译} 2.5MW 以上风力发电机组偏航齿圈大型环锻件技术规范 |
China Machinery Industry
Standards forging |
English PDF |
| TB/T 3575.2-2022 |
Nondestructive testing of rolling stock steel forgings Part 2: Penetrant testing {译} 机车车辆锻钢件无损检测 第2部分：渗透检测 |
China Railway Transport Industry
Standards forging |
English PDF |
| TB/T 3575.1-2022 |
Nondestructive testing of rolling stock forgings Part 1: Magnetic particle testing {译} 机车车辆锻钢件无损检测 第1部分：磁粉检测 |
China Railway Transport Industry
Standards forging |
English PDF |
| TB/T 3575.3-2023 |
Non-destructive testing of rolling stock forgings Part 3: Eddy current testing {译} 机车车辆锻钢件无损检测 第3部分：涡流检测 |
China Railway Transport Industry
Standards forging |
English PDF |
| YS/T 1519-2022 |
Titanium and titanium alloy stepped shaft forgings {译} 钛及钛合金台阶轴锻件 |
China Non-ferrous Metal Industry
Standards forging |
English PDF |
| SY/T 7674-2022 |
Oil and gas drilling equipment Marine structural steel forgings {译} 石油天然气钻采设备 海洋用结构钢锻件 |
China Oil & Gas Industry
Standards forging |
English PDF |
| JB/T 10766-2022 |
Technical specifications for copper-based dry friction plates for forging machine tool clutches {译} 锻压机床离合器铜基干式摩擦片 技术规范 |
China Machinery Industry
Standards forging |
English PDF |
| JB/T 14247-2022 |
Heavy Duty Hot Die forging Presses {译} 重型热模锻压力机 |
China Machinery Industry
Standards forging |
English PDF |
| JB/T 14048-2021 |
Technical conditions of alloy steel forgings for transmission parts of offshore platforms {译} 海工平台传动件合金钢锻件 技术条件 |
China Machinery Industry
Standards forging |
English PDF |
| JB/T 11030-2021 |
Technical conditions for high and low pressure composite rotor forgings of steam turbines {译} 汽轮机高低压复合转子锻件 技术条件 |
China Machinery Industry
Standards forging |
English PDF |
| JB/T 11017-2021 |
Technical conditions of generator rotor forgings for thermal power units of 1000MW and above {译} 1000MW及以上火电机组发电机转子锻件 技术条件 |
China Machinery Industry
Standards forging |
English PDF |
| YB/T 4173-2021 |
forging and boring thick-walled seamless steel pipe for high temperature{译} {译} 高温用锻造镗孔厚壁无缝钢管 |
China Metallurgy Industry
Standards forging |
English PDF |
| JB/T 14123-2021 |
Orbital full hydraulic forging manipulator{译} {译} 轨道式全液压锻造操作机 |
China Machinery Industry
Standards forging |
English PDF |
| JB/T 14122-2021 |
Orbital forging loading and unloading machine{译} {译} 轨道式锻造装出料机 |
China Machinery Industry
Standards forging |
English PDF |
| JB/T 14121-2021 |
Cylinder-driven rapid forging hydraulic press{译} {译} 缸动式快速锻造液压机 |
China Machinery Industry
Standards forging |
English PDF |
| JB/T 14181-2021 |
Process specification for precision forgings of injector housings for common rail systems{译} {译} 共轨系统用喷油器壳体精密锻件 工艺规范 |
China Machinery Industry
Standards forging |
English PDF |
| JB/T 14180-2021 |
Steel automobile steering knuckle forgings - Process specification{译} {译} 钢质汽车转向节锻件 工艺规范 |
China Machinery Industry
Standards forging |
English PDF |
| NB/T 10831-2021 |
Specifications for mirror plate forgings for large hydroelectric generators {译} 大型水轮发电机镜板锻件技术条件 |
China Energy Industry
Standards forging |
English PDF |
| NB/T 10830-2021 |
Specifications for main shaft forgings of large hydroelectric generating units {译} 大型水轮发电机组主轴锻件技术条件 |
China Energy Industry
Standards forging |
English PDF |
| JB/T 6908-2020 |
Steel forgings for positive displacement compressors {译} 容积式压缩机用钢锻件 |
China Machinery Industry
Standards forging |
English PDF |
| JB/T 13850-2020 |
Technical requirements for automotive front axle forgings {译} 汽车前轴锻件 技术要求 |
China Machinery Industry
Standards forging |
English PDF |
| JB/T 13849-2020 |
Technical requirements for precision forgings of injector housings for common rail systems {译} 共轨系统用喷油器壳体精密锻件 技术要求 |
China Machinery Industry
Standards forging |
English PDF |
| JB/T 13848-2020 |
Steel automobile steering knuckle arm forgings - Technical requirements {译} 钢质汽车转向节臂锻件 技术要求 |
China Machinery Industry
Standards forging |
English PDF |
| JB/T 11218-2020 |
Wind Power Tower Flange forgings {译} 风力发电塔架 法兰锻件 |
China Machinery Industry
Standards forging |
English PDF |
| JB/T 14012-2020 |
Design specification for ring rolling dies for special-shaped ring forgings {译} 异形环锻件辗环模 设计规范 |
China Machinery Industry
Standards forging |
English PDF |
| NB/T 47010-2017 |
(Stainless steel and heat-resistant steel forgings for pressure equipment) 承压设备用不锈钢和耐热钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 47009-2017 |
(Alloy steel forgings for low temperature pressure equipment) 低温承压设备用合金钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 47008-2017 |
(Carbon steel and alloy steel forgings for pressure equipment) 承压设备用碳素钢和合金钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20008.28-2017 |
(Other materials for PWR nuclear power plants - Part 28: NS3105 alloy forgings for safety equipment) 压水堆核电厂用其他材料 第28部分：安全级设备用ns3105合金锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20007.45-2017 |
(Stainless steel for pressurized water reactor nuclear power plants - Part 45: Compressed elastic rings with 04Cr13Ni5Mo martensitic stainless steel forgings) 压水堆核电厂用不锈钢 第45部分：压紧弹性环用04cr13ni5mo马氏体不锈钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.38-2017 |
(Hydraulic steel alloys for pressurized water reactors - Part 38: 19MnNiMo forgings for core fillers) 压水堆核电厂用合金钢 第38部分：堆芯补水箱用19mnnimo锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.37-2017 |
(Steel alloys for PWR nuclear power plants - Part 37: Reactor pressure vessels Non-core areas with 19MnNiMo forgings) 压水堆核电厂用合金钢 第37部分：反应堆压力容器非堆芯区用19mnnimo锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.36-2017 |
(Hydraulic steel alloys for pressurized water reactors - Part 36: Reactor pressure vessel core area with 19MnNiMo forgings) 压水堆核电厂用合金钢 第36部分：反应堆压力容器堆芯区用19mnnimo锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20005.37-2017 |
(Carbon steel and low alloy steels for PWR nuclear power plants - Part 37: 17Mn forging for steam generators) 压水堆核电厂用碳钢和低合金钢 第37部分：蒸汽发生器用17mn锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20007.43-2016 |
(PWR nuclear power plants with a stainless steel Part 43: reactor coolant pipes take over the seat with 022Cr17Ni12Mo2N austenitic stainless steel forgings) 压水堆核电厂用不锈钢 第43部分：反应堆冷却剂管道接管座用022cr17ni12mo2n奥氏体不锈钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.32-2016 |
(PWR nuclear power plant with steel - Part 32: Mechanical containment penetrations with 15Cr1Mo forging) 压水堆核电厂用合金钢 第32部分：安全壳机械贯穿件用15cr1mo锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20007.40-2015 |
Stainless steel for pressurized water reactor nuclear power plants - Part 40: austenitic stainless steel forgings used for reactor vessel internals 压水堆核电厂用不锈钢 第40部分：堆内构件用奥氏体不锈钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20007.31-2015 |
Stainless steel for pressurized water reactor nuclear power plants - Part 31: 022Cr19Ni10 stainless steel forgings used for containment vessel 压水堆核电厂用不锈钢 第31部分：安全壳用022cr19ni10不锈钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20005.31-2015 |
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants - Part 31: 15Mn forgings for containment vessel 压水堆核电厂用碳钢和低合金钢 第31部分：安全壳用15mn锻件 |
China Energy industry
Standards forging |
English PDF |
| DL/T 1395-2014 |
Specification for inspection and acceptance of castings and forgings in hydroelectric engineering 水电工程设备铸锻件检验验收规范 |
China Electricity & Power
Standards forging |
English PDF |
| YB/T 5293-2014 |
Metallic materials-forging test 金属材料 顶锻试验方法 |
China GB-National
Standards forging |
English PDF |
| NB/T 20006.9-2013 |
Alloy steel for pressurized water reactor nuclear power plants. Part 9: Mn-Ni-Mo steel forgings for steam generator channel head 压水堆核电厂用合金钢 第9部分：蒸汽发生器水室封头用锰-镍-钼钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 47029-2012 |
Aluminium and aluminium alloy forgings for pressure vessels 压力容器用铝及铝合金锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 47028-2012 |
Nickel and nickel alloy forgings for pressure vessels 压力容器用镍及镍合金锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20007.4-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part 4: Niobium stabilized austenitic stainless steel forgings for the shafts of reactor coolant pumps 压水堆核电厂用不锈钢 第4部分：反应堆冷却剂泵轴用含铌稳定化奥氏体不锈钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.8-2012 |
Alloy steel for pressurized water reactor nuclear power plants. Part 8: Mn-Ni-Mo steel forgings for steam generator upper heads 压水堆核电厂用合金钢 第8部分：蒸汽发生器上封头用锰-镍钼钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.7-2012 |
Alloy steel for pressurized water reactor nuclear power plants. Part 7: Mn-Ni-Mo steel forgings for steam generators shells 压水堆核电厂用合金钢 第7部分：蒸汽发生器筒体用锰-镍-钼钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.5-2012 |
Alloy steel for pressurized water reactor nuclear power plants. Part 5: Mn-Ni-Mo alloy steel forgings for reactor pressure vessel heads 压水堆核电厂用合金钢 第5部分：反应堆压力容器封头用锰-镍-钼钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.13-2012 |
Alloy steel for pressurized water reactor nuclear power plants. Part 13: Alloy steel forgings for reactor coolant pump motor shaft assembles 压水堆核电厂用合金钢 第13部分：反应堆冷却剂泵电动机轴系用合金钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 31025-2012 |
Ring type forgings of wind turbine generator system 风力发电机组 环形锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20008.1-2012 |
Other material for pressuriaed water reactor nuclear power plant. Part1: Alloy steel forgings for use in reactor coolant system supports 压水堆核电厂用其他材料 第1部分：反应堆冷却剂系统支承件用合金钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20007.3-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part 3: Controlled nitrogen content austenitic stainless steel forgings for core upports and upper support plates 压水堆核电厂用不锈钢 第3部分：堆芯支承件和上支承板用控氮奥氏体不锈钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20007.2-2012 |
Stainless steel for pressurized water reactor of nuclear power plants. Part 2: Austenitic stainless steel forgings for class 2 and 3 tube plates of heat exchanger 压水堆核电厂用不锈钢 第2部分：2、3级热交换器管板用奥氏体不锈钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20007.17-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part17: Martensitic stainless steel forgings used for internal hold down springs 压水堆核电厂用不锈钢 第17部分：堆内构件压紧弹性环用马氏体不锈钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20007.16-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part16: Class 2 and 3 martensitic stainless steel forgings 压水堆核电厂用不锈钢 第16部分：2、3级马氏体不锈钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20005.3-2012 |
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 3: forgings for class 2, 3 auxiliary pump shafts 压水堆核电厂用碳钢和低合金钢 第3部分：2、3 级辅助泵轴锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20005.2-2012 |
Carbon steel and low alloy steel for pressurized water reactor nuclear power plant. Part 2: forgings for class 2, 3 heat exchanger tube plates 压水堆核电厂用碳钢和低合金钢 第2部分:2、3级热交换器管板锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.6-2011 |
Alloy steel for pressurized water reactor nuclear power plants. Part 6: Mn-Ni-Mo steel forgings for PWR steam generator tube plates 压水堆核电厂用合金钢 第6部分:蒸汽发生器管板用锰-镍-钼钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.4-2011 |
Alloy steel for pressurized water reactor nuclear power plants. Part 4: Mn-Ni-Mo steel forgings for reactor pressure vessels nozzles 压水堆核电厂用合金钢 第4部分:反应堆压力容器接管嘴用锰-镍-钼钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.3-2011 |
Alloy steel for pressurized water reactor nuclear power plants. Part 3: Mn-Ni-Mo steel forgings for transition rings and flanges of reactor pressure vessels 压水堆核电厂用合金钢 第3部分: 反应堆压力容器过渡段和法兰用锰-镍-钼钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.2-2011 |
Alloy steel for pressurized water reactor nuclear power plants. Part 2: Mn-Ni-Mo steel forgings for reactor pressure vessel shells outside the beltline region 压水堆核电厂用合金钢 第2部分:不承受强辐照的反应堆压力容器筒体用锰-镍-钼钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.12-2011 |
Alloy steel for pressurized water reactor nuclear power plants. Part 12: Mn-Ni-Mo steel main flange forgings for pressurized water reactor coolant pumps 压水堆核电厂用合金钢 第12部分:反应堆冷却剂泵主法兰用锰-镍-钼钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.1-2011 |
Alloy steel for pressurized water reactor nuclear power plants. Part 1: Mn-Ni-Mo steel forgings for reactor pressure vessel shelss in the beltline region 压水堆核电厂用合金钢 第1部分:承受强辐照的反应堆压力容器筒体用锰-镍-钼钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 47010-2010 |
Stainless and heat-resisting steel forgings for pressure equipment 承压设备用不锈钢和耐热钢锻件 |
China Energy industry
Standards forging |
English PDF |
| SY/T 5676-2010 |
Technical conditions for high pressure forgings for petroleum drilling and production machinery 石油钻采机械产品用高压锻件技术条件 |
China Oil & Gas Industry
Standards forging |
English PDF |
| NB/T 47009-2010 |
Low-alloy steel forgings for low temperature pressure equipment {Academic version} 低温承压设备用低合金钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 47008-2010 |
Carbon and alloy steel forgings for pressure equipment {Academic version} 承压设备用碳素钢和合金钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20010.5-2010 |
PWR nuclear power plant valve. Part 5: Specification of austenitic stainless steel forging 压水堆核电厂阀门 第5部分：奥氏体不锈钢锻件技术条件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20010.4-2010 |
PWR nuclear power plant valve. Part 4: Specification of carbon steel forging 压水堆核电厂阀门 第4部分：碳素钢锻件技术条件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20007.1-2010 |
Stainless steel for pressurized water reactor nuclear power plants. Part 1: Class 1, 2 and 3 austenitic stainless steel forgings 压水堆核电厂用不锈钢 第1部分：1、2、3级奥氏体不锈钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.11-2010 |
Alloy steel for pressurized water reactor nuclear power plants. Part 11: Mn-Ni-Mo steel forgings for pressurizer shells and heads 压水堆核电厂用合金钢 第11部分：稳压器筒体、封头用锰-镍-钼钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20006.10-2010 |
Alloy steel for pressurized water reactor nuclear power plants. Part 10: Mn-Ni-Mo steel forgings for pressurizer and steam generator nozzles and covers 压水堆核电厂用合金钢 第10部分：稳压器和蒸汽发生器接管嘴及盖板用锰-镍-钼钢锻件 |
China Energy industry
Standards forging |
English PDF |
| NB/T 20005.1-2010 |
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 1: Class 1, 2, 3 forgings 压水堆核电厂用碳钢和低合金钢 第1部分：1、2、3级锻件 |
China Energy industry
Standards forging |
English PDF |
| YY 0117.3-2005 |
Implants for surgery. forgings, castings for bone joint prostheses. Cobalt chromium molybdenum alloy castings 外科植入物 骨关节假体锻、铸件 钴铬钼合金铸件 |
China Medicine & Medical Device
Standards forging |
English PDF |
| YY 0117.2-2005 |
Implants for surgery. forgings, castings for bone joint prostheses. ZTi6A14V titanium alloy castings 外科植入物 骨关节假体锻、铸件 zti6al4v钛合金铸件 |
China Medicine & Medical Device
Standards forging |
English PDF |
| YY 0117.1-2005 |
Implants for surgery. forgings, castings for bone joint prostheses. Ti6A14V titanium alloy forgings 外科植入物 骨关节假体锻、铸件 ti6al4v钛合金锻件 |
China Medicine & Medical Device
Standards forging |
English PDF |
| SH/T 3138-2003 |
Integrated forging reinforcement for spherical tanks 球形储罐整体补强凸缘 |
China Petrochemical Industry
Standards forging |
English PDF |
| DL/T 768.2-2002 |
Manufacture quality specification for electric power fittings forgings 电力金具制造质量 锻制件 |
China Electricity & Power
Standards forging |
English PDF |
| TB/T 3014-2001 |
Railway alloy steel forgings 铁道用合金钢锻件 |
China Railway & Train
Standards forging |
English PDF |
| QB/T 3538-1999 |
(Sewing Steel forgings General technical conditions) 缝纫机钢锻件通用技术条件 |
China Light Industry
Standards forging |
English PDF |
| TB/T 2944-1999 |
(Railway Carbon Steel forgings) 铁道用碳素钢锻件 |
China Railway & Train
Standards forging |
English PDF |
| TB/T 1569.8-1995 |
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations. Black forgings) 铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.黑皮类锻件 |
China Railway & Train
Standards forging |
English PDF |
| TB/T 1569.7-1995 |
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations. Axis class) 铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.光轴类 |
China Railway & Train
Standards forging |
English PDF |
| TB/T 1569.6-1995 |
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations. Ring category) 铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.圆环类 |
China Railway & Train
Standards forging |
English PDF |
| TB/T 1569.5-1995 |
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations sleeve type) 铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.套筒类 |
China Railway & Train
Standards forging |
English PDF |
| TB/T 1569.4-1995 |
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations. Perforated disc category) 铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.带孔圆盘类 |
China Railway & Train
Standards forging |
English PDF |
| TB/T 1569.3-1995 |
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations. Disc type) 铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.圆盘类 |
China Railway & Train
Standards forging |
English PDF |
| TB/T 1569.2-1995 |
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations. Stepped shaft) 铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.台阶轴类 |
China Railway & Train
Standards forging |
English PDF |
| TB/T 1569.1-1995 |
(Railway rolling stock on the hammer forgings mechanical allowances and limit deviations General requirements) 铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.一般要求 |
China Railway & Train
Standards forging |
English PDF |
| SJ/T 31036-1994 |
Requirements of readiness and methods of inspection and assessment for automatic (cold forging, edge trimming and thread rolling) machines 自（冷锻、切边、搓丝）机完好要求和检查评定方法 |
China Electronics
Standards forging |
English PDF |
| JG/T 5011-8-1992 |
(Construction machinery and equipment forging general technical conditions) 建筑机械与设备 锻件通用技术条件 |
China Building & Construction
Standards forging |
English PDF |
| Find out:92Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
