China National Standards
China GB Standards Search System  

China GB Standards list issued in 2016 year

  •  China "2016" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 32482.1-2016 LED—Binning—Part 1: General requirements and white colour grid
    LED 分选 第1部分:一般要求和白光栅格
    China National Standards
    2016

    English PDF
    GB/T 32481-2016 Performance requirements of LED luminaires for tunnel lighting
    隧道照明用LED灯具性能要求
    China National Standards
    2016

    English PDF
    GB/T 32480-2016 Textile machinery—Mixing bale openers for cotton spinning—Vocabulary and principles of construction
    纺织机械 棉纺用开包混棉机 术语、定义和结构原理
    China National Standards
    2016

    English PDF
    GB/T 32479-2016 General safety technical requirements for recycled fiber
    再加工纤维基本安全技术要求
    China National Standards
    2016

    English PDF
    GB/T 32478-2016 Household and similar electrical appliances method of measuring performance —Assessment of repeatability and reproducibility
    家用和类似用途电器性能测试方法 重复性和再现性评价
    China National Standards
    2016

    English PDF
    GB/T 32477-2016 Plastics—Determination of total chlorine content in toluene diisocyanates for use in the production of polyurethanes
    塑料 用于聚氨酯生产的甲苯二异氰酸酯中总氯含量的测定
    China National Standards
    2016

    English PDF
    GB/T 32476-2016 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing system
    具有油气回收功能的计量分配燃油用橡胶和塑料软管及软管组合件
    China National Standards
    2016

    English PDF
    GB/T 32475-2016 Rubber hose and hose assemblies for coal seam water injection,gas drainage and drilling plugging
    煤层注水、钻孔封堵及瓦斯排放橡胶软管和软管组合件
    China National Standards
    2016

    English PDF
    GB/T 32474-2016 Rubber hoses and hose assemblies for petroleum drilling well control equipments
    石油钻井井控设备用橡胶软管及软管组合件
    China National Standards
    2016

    English PDF
    GB/T 32473-2016 Ion exchange resins for condensate polishing treatment
    凝结水精处理用离子交换树脂
    China National Standards
    2016

    English PDF
    GB/T 32472-2016 D113 macroporous weak acid acrylic type cation exchange resins
    D113大孔弱酸性丙烯酸系阳离子交换树脂
    China National Standards
    2016

    English PDF
    GB/T 32471-2016 Plastics—Determination of the isomer ratio in toluene diisocyanates for use in the production of polyurethanes
    塑料 用于聚氨酯生产的甲苯二异氰酸酯异构比的测定
    China National Standards
    2016

    English PDF
    GB/T 32469-2016 Plastics—Polyurethane raw materials—Toluene diisocyanates
    塑料 聚氨酯原料 甲苯二异氰酸酯
    China National Standards
    2016

    English PDF
    GB/T 6882-2016 Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Precision methods for anechoic rooms and hemi-anechoic rooms
    声学 声压法测定噪声源声功率级和声能量级 消声室和半消声室精密法
    China National Standards
    2016

    English PDF
    GB/T 5587-2016 Basic shapes,dimensions,symbols and notations of silver based electrical contacts
    银基电触头基本形状、尺寸、符号及标注
    China National Standards
    2016

    English PDF
    GB/T 5586-2016 Test methods for essential property of electrical contact materials
    电触头材料基本性能试验方法
    China National Standards
    2016

    English PDF
    GB/T 31897.201-2016 Luminaire performance—Part 2-1: Particular requirements for LED luminaires
    灯具性能 第2-1部分:LED灯具特殊要求
    China National Standards
    2016

    English PDF
    GB/T 31052.7-2016 Lifting appliances—Code of inspection and maintenance—Part 7: Derrick cranes
    起重机械 检查与维护规程 第7部分:桅杆起重机
    China National Standards
    2016

    English PDF
    GB/T 31052.10-2016 Lifting appliances—Code of inspection and maintenance—Part 10: Series lifting equipments
    起重机械 检查与维护规程 第10部分:轻小型起重设备
    China National Standards
    2016

    English PDF
    GB/T 2970-2016 Method for ultrasonic testing of thicker steel plates
    厚钢板超声检测方法
    China National Standards
    2016

    English PDF
    GB/T 2900.20-2016 Electrotechnical terminology High-voltage switchgear and controlgear
    电工术语 高压开关设备和控制设备
    China National Standards
    2016

    English PDF
    GB/T 2637-2016 Ampoules
    安瓿
    China National Standards
    2016

    English PDF
    GB/T 25774.2-2016 Test methods for welding consumables—Part 2: Preparation of single-run and two-run technique test specimens in steel
    焊接材料的检验 第2部分:钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验
    China National Standards
    2016

    English PDF
    GB/T 2550-2016 Gas welding equipment—Rubber hoses for welding, cutting and allied processes
    气体焊接设备 焊接、切割和类似作业用橡胶软管
    China National Standards
    2016

    English PDF
    GB/T 23724.1-2016 Cranes—Inspections—Part 1: General
    起重机 检查 第1部分:总则
    China National Standards
    2016

    English PDF
    GB/T 22715-2016 Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
    旋转交流电机定子成型线圈耐冲击电压水平
    China National Standards
    2016

    English PDF
    GB/T 20835-2016 Guides for magnetization test of generator stator core
    发电机定子铁心磁化试验导则
    China National Standards
    2016

    English PDF
    GB/T 20833.2-2016 Rotating electrical machines—The stator winding insulation of rotating electrical machines—Part 2: On-line partial discharge measurements on
    旋转电机 旋转电机定子绕组绝缘 第2部分:在线局部放电测量
    China National Standards
    2016

    English PDF
    GB/T 20833.1-2016 Rotating electrical machines—The stator winding insulation of rotating electrical machines—Part 1: Off-line partial discharge measurements
    旋转电机 旋转电机定子绕组绝缘 第1部分:离线局部放电测量
    China National Standards
    2016

    English PDF
    GB/T 20448.2-2016 Self-propelled machinery for forestry—Laboratory tests and performance requirements for roll-over protective structures—Part 2: Machines having a rotating platform with a cab and boom on the platform
    自行式林业机械 滚翻保护结构实验室试验和性能要求 第2部分:回转平台上安装驾驶室和起重臂的机械
    China National Standards
    2016

    English PDF
    GB/T 20408-2016 Radio-controlled analogue clocks
    指针式电波钟
    China National Standards
    2016

    English PDF
    GB/T 20343-2016 Agricultural tractors and machinery—Connection of implements via three point linkage—Clearance zone around implement
    农业拖拉机和机械 三点悬挂机具的连接装置 机具周围的间隙范围
    China National Standards
    2016

    English PDF
    GB/T 20341-2016 Tractors and self-propelled machinery for agriculture—Operator controls—Actuating forces, displacement, location and method of operation
    农业拖拉机和自走式机械 操作者操纵装置 操纵力、操纵方向、操纵位置和方法
    China National Standards
    2016

    English PDF
    GB/T 20290-2016 Electric dishwashers for household use—Methods for measuring the performance
    家用电动洗碗机 性能测试方法
    China National Standards
    2016

    English PDF
    GB/T 20140-2016 Measurement method and evaluation criteria of dynamic characteristic and vibration on stator end windings of cylindrical synchronous generators
    隐极同步发电机定子绕组端部动态特性和振动测量方法及评定
    China National Standards
    2016

    English PDF
    GB/T 20041.25-2016 Conduit systems for cable management— Part 25: Particular requirements for conduit fixing devices
    电缆管理用导管系统 第25部分:导管固定装置的特殊要求
    China National Standards
    2016

    English PDF
    GB/T 19749.1-2016 Coupling capacitors and capacitor dividers—Part 1: General rules
    耦合电容器和电容分压器 第1部分:总则
    China National Standards
    2016

    English PDF
    GB/T 19436.4-2016 Electrical safety of machinery—Electro-sensitive protective equipment—Part 4: Particular requirements for equipment using vision based protective devices (VBPD)
    机械电气安全 电敏保护设备 第4部分:使用视觉保护装置(VBPD)设备的特殊要求
    China National Standards
    2016

    English PDF
    GB/T 19355.3-2016 Zinc coatings—Guidelines and recommendations for the protection against corrosion of iron and steel in structures—Part 3: Sherardizing
    锌覆盖层 钢铁结构防腐蚀的指南和建议 第3部分:粉末渗锌
    China National Standards
    2016

    English PDF
    GB/T 19355.2-2016 Zinc coatings—Guidelines and recommendations for the protection against corrosion of iron and steel in structures—Part 2: Hot dip galvanizing
    锌覆盖层 钢铁结构防腐蚀的指南和建议 第2部分:热浸镀锌
    China National Standards
    2016

    English PDF
    GB/T 19355.1-2016 Zinc coatings—Guidelines and recommendations for the protection against corrosion of iron and steel in structures—Part 1: General principles of design and corrosion resistance
    锌覆盖层 钢铁结构防腐蚀的指南和建议 第1部分:设计与防腐蚀的基本原则
    China National Standards
    2016

    English PDF
    GB/T 19040-2016 Agricultural tractors—Requirements for steering
    农业拖拉机 转向要求
    China National Standards
    2016

    English PDF
    GB/T 18802.31-2016 Low-voltage surge protective devices—Surge protective devices for specific application including d.c.—Part 31: Requirements and tests for SPDs in photovoltaic applications
    低压电涌保护器 特殊应用(含直流)的电涌保护器 第31部分:用于光伏系统的电涌保护器(SPD) 性能要求和试验方法
    China National Standards
    2016

    English PDF
    GB/T 18802.21-2016 Low-voltage surge protective devices—Part 21: Surge protective devices connected to telecommunications and signaling networks—Performance requirements and testing methods
    低压电涌保护器 第21部分:电信和信号网络的电涌保护器(SPD) 性能要求和试验方法
    China National Standards
    2016

    English PDF
    GB/T 18737.9-2016 Textile machinery and accessories—Beams for winding—Part 9: Dyeing beams for textile fabrics fabrics
    纺织机械与附件 经轴 第9部分:织物染色用轴
    China National Standards
    2016

    English PDF
    GB/T 18737.7-2016 Textile machinery and accessories—Beams for winding—Part 7:Beams for dyeing slivers, rovings and yarns
    纺织机械与附件 经轴 第7部分:条子、粗纱和纱线染色用轴
    China National Standards
    2016

    English PDF
    GB/T 17948.7-2016 Rotating electrical machines—Functional evaluation of insulation systems—General guidelines
    旋转电机 绝缘结构功能性评定 总则
    China National Standards
    2016

    English PDF
    GB/T 17948.5-2016 Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for form-wound windings—Multifactor evaluation by endurance under simultaneous thermal and electrical stresses
    旋转电机 绝缘结构功能性评定 成型绕组试验规程 热、电综合应力耐久性多因子评定
    China National Standards
    2016

    English PDF
    GB/T 17948.4-2016 Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for form-wound windings—Evaluation by electrical endurance
    旋转电机 绝缘结构功能性评定 成型绕组试验规程 电压耐久性评定
    China National Standards
    2016

    English PDF
    GB/T 17885-2016 Electromechanical contactors for household and similar purposes
    家用及类似用途机电式接触器
    China National Standards
    2016

    English PDF
    GB/T 16896.2-2016 Instruments and software used for measurement in high-voltage and high-current tests—Part 2: Requirements for software for tests with impulse voltages and currents
    高电压和大电流试验测量用仪器和软件 第2部分:对冲击电压和冲击电流试验用软件的要求
    China National Standards
    2016

    English PDF
    GB/T 16842-2016 Protection of persons and equipment by enclosures—Probe for verification
    外壳对人和设备的防护 检验用试具
    China National Standards
    2016

    English PDF
    GB/T 16461-2016 Tool-life testing with single-point turning tools
    单刃车削刀具寿命试验
    China National Standards
    2016

    English PDF
    GB/T 16460-2016 Tool life testing in end milling
    立铣刀寿命试验
    China National Standards
    2016

    English PDF
    GB/T 16459-2016 Tool life testing in face milling
    面铣刀寿命试验
    China National Standards
    2016

    English PDF
    GB/T 16296.2-2016 Acoustics—Audiometric test methods—Part 2: Sound-field audiometry with pure-tone and narrow-band test signals
    声学 测听方法 第2部分:用纯音及窄带测试信号的声场测听
    China National Standards
    2016

    English PDF
    GB/T 1592.3-2016 Agricultural tractors—Rear-mounted power take-off types 1,2 ,3 and 4—Part 3: Main PTO dimensions and spline dimensions, location of PTO
    农业拖拉机 后置动力输出轴 1、2、3和4型 第3部分:动力输出轴尺寸和花键尺寸、动力输出轴位置
    China National Standards
    2016

    English PDF
    GB/T 1592.2-2016 Agricultural tractors—Rear-mounted power take-off types 1,2,3 and 4—Part 2: Narrow-track tractors, dimensions for master shield and clearance zone
    农业拖拉机 后置动力输出轴 1、2、3和4型 第2部分:窄轮距拖拉机防护罩尺寸和空隙范围
    China National Standards
    2016

    English PDF
    GB/T 1592.1-2016 Agricultural tractors—Rear-mounted power take-off types 1, 2, 3 and 4—Part 1: General specifications,safety requirements,dimensions for master shield and clearance zone
    农业拖拉机 后置动力输出轴 1、2、3和4型 第1部分:通用要求、安全要求、防护罩尺寸和空隙范围
    China National Standards
    2016

    English PDF
    GB/T 15370.6-2016 Agricultural tractors—General requirements—Part 6:Four-wheel boat tractors
    农业拖拉机 通用技术条件 第6部分:四轮船式拖拉机
    China National Standards
    2016

    English PDF
    GB/T 14598.302-2016 Specification for arc fiash protection equipment
    弧光保护装置技术要求
    China National Standards
    2016

    English PDF
    GB/T 14598.149-2016 Measuring relays and protection equipment—Part 149: Functional requirements for thermal electrical relays
    量度继电器和保护装置 第149部分:电热继电器功能要求
    China National Standards
    2016

    English PDF
    GB/T 14560-2016 Crawler cranes
    履带起重机
    China National Standards
    2016

    English PDF
    GB/T 1443-2016 Self-holding tapers for machine tools and tool shanks
    机床和工具柄用自夹圆锥
    China National Standards
    2016

    English PDF
    GB/T 14048.7-2016 Low-voltage switchgear and controlgear—Part 7-1:Ancillary equipment—Terminal blocks for copper conductors
    低压开关设备和控制设备 第7-1部分:辅助器件 铜导体的接线端子排
    China National Standards
    2016

    English PDF
    GB/T 14048.18-2016 Low-voltage switchgear and controlgear—Part 7-3: Ancillary equipment—Safety requirements for fuse terminal blocks
    低压开关设备和控制设备 第7-3部分:辅助器件 熔断器接线端子排的安全要求
    China National Standards
    2016

    English PDF
    GB/T 13075-2016 Periodic inspection and evaluation of welded steel gas cylinders
    钢质焊接气瓶定期检验与评定
    China National Standards
    2016

    English PDF
    GB/T 13004-2016 Periodic inspection and evaluation of seamless steel gas cylinders
    钢质无缝气瓶定期检验与评定
    China National Standards
    2016

    English PDF
    GB/T 12145-2016 Quality criterion of water and steam for power plant and steam-generating equipment
    火力发电机组及蒸汽动力设备水汽质量
    China National Standards
    2016

    English PDF
    GB/T 12009.5-2016 Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 5: Determination of acidity
    塑料 聚氨酯生产用芳香族异氰酸酯 第5部分:酸度的测定
    China National Standards
    2016

    English PDF
    GB/T 12009.4-2016 Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 4: Determination of isocyanate content
    塑料 聚氨酯生产用芳香族异氰酸酯 第4部分:异氰酸根含量的测定
    China National Standards
    2016

    English PDF
    GB/T 12009.2-2016 Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 2: Determination of hydrolysable chlorine
    塑料 聚氨酯生产用芳香族异氰酸酯 第2部分:水解氯的测定
    China National Standards
    2016

    English PDF
    GB/T 1114-2016 shell end mills
    套式立铣刀
    China National Standards
    2016

    English PDF
    GB/T 10855-2016 Inverted tooth(silent) chains and sprockets
    齿形链和链轮
    China National Standards
    2016

    English PDF
    GB/T 10284-2016 Forestry machinery—Portable pneumatic fire extinguisher—Measurement of noise
    林业机械 便携式风力灭火机 噪声的测定
    China National Standards
    2016

    English PDF
    GB/T 10283-2016 Forestry machinery—Portable pneumatic fire extinguisher—Measurement of vibration
    林业机械 便携式风力灭火机 振动的测定
    China National Standards
    2016

    English PDF
    GB/T 10233-2016 Basic testing method for low-voltage switchgear and controlgear assemblies
    低压成套开关设备和电控设备基本试验方法
    China National Standards
    2016

    English PDF
    GB/T 10067.8-2016 Basic specifications for electroheat installations—Part 8: Electroslag remelting furnaces
    电热装置基本技术条件 第8部分:电渣重熔炉
    China National Standards
    2016

    English PDF
    GB/T 10066.11-2016 Test method for electroheat installations—Part 11: Submerged-arc furnaces
    电热装置的试验方法 第11部分:埋弧炉
    China National Standards
    2016

    English PDF
    GB/T 7920.4-2016 Concrete machinery terminology
    混凝土机械术语
    China National Standards
    2016

    English PDF
    GB/T 32543-2016 Building construction machinery and equipment—Concrete delivery pipes—Connection types and safety requirements
    建筑施工机械与设备 混凝土输送管 连接型式和安全要求
    China National Standards
    2016

    English PDF
    GB/Z 32564-2016 Nut design guide
    螺母设计指南
    China National Standards
    2016

    English PDF
    GB/T 9097-2016 Sintered metal materials,excluding hardmetals—Determination of apparent hardness and mincrohardness
    烧结金属材料(不包括硬质合金) 表观硬度和显微硬度的测定
    China National Standards
    2016

    English PDF
    GB/T 889.2-2016 Prevailing torque type hexagon nuts (with non-metallic insert), style 1—Fine pitch thread
    1型非金属嵌件六角锁紧螺母 细牙
    China National Standards
    2016

    English PDF
    GB/T 823-2016 Small pan head screws with cross recess
    十字槽小盘头螺钉
    China National Standards
    2016

    English PDF
    GB/T 822-2016 Cheese head screws with cross recess
    十字槽圆柱头螺钉
    China National Standards
    2016

    English PDF
    GB/T 819.2-2016 Countersunk flat head screws with cross recess—Part 2: Property class 8.8, stainless steel screws and non-ferrous metal screws
    十字槽沉头螺钉 第2部分:8.8级、不锈钢及有色金属螺钉
    China National Standards
    2016

    English PDF
    GB/T 819.1-2016 Countersunk flat head screws with cross recess—Part 1: Property class 4.8
    十字槽沉头螺钉 第1部分:4.8级
    China National Standards
    2016

    English PDF
    GB/T 818-2016 Pan head screws with cross recess
    十字槽盘头螺钉
    China National Standards
    2016

    English PDF
    GB/T 6974.6-2016 Cranes—Vocabulary—Part 6: Railway cranes
    起重机 术语 第6部分:铁路起重机
    China National Standards
    2016

    English PDF
    GB/T 69-2016 Slotted raised countersunk head screws
    开槽半沉头螺钉
    China National Standards
    2016

    English PDF
    GB/T 67-2016 Slotted pan head screws
    开槽盘头螺钉
    China National Standards
    2016

    English PDF
    GB/T 65-2016 Slotted cheese head screws
    开槽圆柱头螺钉
    China National Standards
    2016

    English PDF
    GB/T 6187.2-2016 Prevailing torque type all-metal hexagon nuts with flange, style 2—Fine pitch thread
    2型全金属六角法兰面锁紧螺母 细牙
    China National Standards
    2016

    English PDF
    GB/T 6187.1-2016 Prevailing torque type all-metal hexagon nuts with flange, style 2
    2型全金属六角法兰面锁紧螺母
    China National Standards
    2016

    English PDF
    GB/T 6185.2-2016 Prevailing torque type all-metal hexagon nuts,style 2—Fine pitch thread
    2型全金属六角锁紧螺母 细牙
    China National Standards
    2016

    English PDF
    GB/T 6185.1-2016 Prevailing torque type all-metal hexagon nuts, style 2
    2型全金属六角锁紧螺母
    China National Standards
    2016

    English PDF
    GB/T 6183.2-2016 Prevailing torque type hexagon nuts with flange(with non-metallic insert), style 2—Fine pitch thread
    2型非金属嵌件六角法兰面锁紧螺母 细牙
    China National Standards
    2016

    English PDF
    GB/T 6183.1-2016 Prevailing torque type hexagon nuts with flange( with non-metallic insert), style 2
    2型非金属嵌件六角法兰面锁紧螺母
    China National Standards
    2016

    English PDF
    GB/T 6182-2016 Prevailing torque type hexagon nuts (with non-metallic insert), style 2
    2型非金属嵌件六角锁紧螺母
    China National Standards
    2016

    English PDF

    Find out:2284Items   |  To Page of: First -Previous-Next -Last  | [15] [16] [17] [18] [19] [20] [21]

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards