China National Standards

China Indentation GB Standards Search


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "Indentation" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 41605-2022 Silicon nitride materials for rolling bearing balls - Test method for Indentation fracture resistance at room temperature - Indentation method
    滚动轴承球用氮化硅材料 室温压痕断裂阻力试验方法 压痕法
    China National Standards
    Indentation

    English PDF
    GB/T 21838.3-2022 Metallic materials - Instrumented Indentation tests for hardness and material parameters - Part 3: Calibration of standard blocks
    金属材料 硬度和材料参数的仪器化压入试验 第3部分:标准块的标定
    China National Standards
    Indentation

    English PDF
    GB/T 21838.2-2022 Metallic materials - Instrumented Indentation tests for hardness and material parameters - Part 2: Verification and calibration of testing machines
    金属材料 硬度和材料参数的仪器化压入试验 第2部分:试验机的检验和校准
    China National Standards
    Indentation

    English PDF
    GB/T 1927.18-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 18: Determination of resistance to impact Indentation
    无疵小试样木材物理力学性质试验方法 第18部分:抗冲击压痕测定
    China National Standards
    Indentation

    English PDF
    GB/T 39635-2020 Metallic materials—Measurement of Indentation tensile properties and residual stresses by an instrumented indentation test
    金属材料 仪器化压入法测定压痕拉伸性能和残余应力
    China National Standards
    Indentation

    English PDF
    GB/T 21838.4-2020 Metallic materials—Instrumented Indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings
    金属材料 硬度和材料参数的仪器化压入试验 第4部分:金属和非金属覆盖层的试验方法
    China National Standards
    Indentation

    English PDF
    GB/T 24523-2020 Metallic materials—Test method for rapid Indentation (Brinell type) hardness testing
    金属材料 快速压入(布氏型)硬度试验方法
    China National Standards
    Indentation

    English PDF
    GB/T 37900-2019 Test method of hardness and fracture toughness for ultra-thin glass—Low-load vickers hardness Indentation method
    超薄玻璃硬度和断裂韧性试验方法 小负荷维氏硬度压痕法
    China National Standards
    Indentation

    English PDF
    GB/T 37782-2019 Metallic materials—Indentation test—Determination of strength, hardness and stress-strain curve
    金属材料 压入试验 强度、硬度和应力-应变曲线的测定
    China National Standards
    Indentation

    English PDF
    GB/T 21838.1-2019 Metallic materials—Instrumented Indentation test for hardness and materials parameters—Part 1:Test method
    金属材料 硬度和材料参数的仪器化压入试验 第1部分:试验方法
    China National Standards
    Indentation

    English PDF
    GB/T 9456-1988 Cross recessed hexagon head tapping screws withIndentation
    十字槽凹穴六角自攻螺钉
    China National Standards
    Indentation

    English PDF
    GB/T 9275-2008 Paint and varnishes - Buchholz Indentation test
    色漆和清漆 巴克霍尔兹压痕试验
    China National Standards
    Indentation

    English PDF
    GB/T 9074.20-2004 Cross recessed hexagon head tapping screw with Indentation and washer assemblies with plain washers
    十字槽凹穴六角头自攻螺钉和平垫圈组合件
    China National Standards
    Indentation

    English PDF
    GB/T 9074.13-1988 Cross recessed hexagon bolt with Indentation,single coil lock washer and plain washer assemblies
    十字槽凹穴六角头螺栓,弹簧垫圈和平垫圈组合件
    China National Standards
    Indentation

    English PDF
    GB/T 9074.12-1988 Cross recessed hexagon bolt with Indentation and single coil spring lock washer assemblies
    十字槽凹穴六角头螺栓和弹簧垫圈组合件
    China National Standards
    Indentation

    English PDF
    GB/T 9074.11-1988 Cross recessed hexagon bolt with Indentation and plain washer assemblies
    十字槽凹穴六角头螺栓和平垫圈组合件
    China National Standards
    Indentation

    English PDF
    GB/T 531.2-2009 Rubber, vulcanized or thermoplastic - Determination of Indentation hardness - Part 2: IRHD pocket meter method
    硫化橡胶或热塑性橡胶 压入硬度试验方法 第2部分:便携式橡胶国际硬度计法
    China National Standards
    Indentation

    English PDF
    GB/T 531.1-2008 Rubber, vulcanized or thermoplastic - Determination of Indentation hardness - Part 1:Duromerer method (Shore hardness)
    硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分:邵氏硬度计法(邵尔硬度)
    China National Standards
    Indentation

    English PDF
    GB/T 3398.1-2008 Plastics - Determination of hardness - Part 1: Ball Indentation method
    塑料 硬度测定 第1部分:球压痕法
    China National Standards
    Indentation

    English PDF
    GB/T 31228-2014 Instrumented nanoIndentation test―Terminology
    仪器化纳米压入试验 术语
    China National Standards
    Indentation

    English PDF
    GB/T 25898-2010 Instrumented nanoIndentation test - Indentation hardness and modulus of thin film
    仪器化纳米压入试验方法 薄膜的压入硬度和弹性模量
    China National Standards
    Indentation

    English PDF
    GB/T 24523-2009 Test method for rapid Indentation (Brinell) hardness testing of metallic materials
    金属材料快速压痕(布氏)硬度试验方法
    China National Standards
    Indentation

    English PDF
    GB/T 24179-2009 Metallic materials - Residual stress determination - The Indentation strain-gage method
    金属材料 残余应力测定 压痕应变法
    China National Standards
    Indentation

    English PDF
    GB/T 2411-2008 Plastics and ebonite - Determination of Indentation hardness by means of a duronmeter(shore hardness)
    塑料和硬橡胶 使用硬度计测定压痕硬度(邵氏硬度)
    China National Standards
    Indentation

    English PDF
    GB/T 22458-2008 General rules of instrumented nanoIndentation test
    仪器化纳米压入试验方法通则
    China National Standards
    Indentation

    English PDF
    GB/T 21838.4-2008 Metallic materials - Instrumented Indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
    金属材料 硬度和材料参数的仪器化压痕试验 第4部分:金属和非金属覆盖层的试验方法
    China National Standards
    Indentation

    English PDF
    GB/T 21838.3-2008 Metallic materials - Instrumented Indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
    金属材料 硬度和材料参数的仪器化压痕试验 第3部分: 标准块的标定
    China National Standards
    Indentation

    English PDF
    GB/T 21838.2-2008 Metallic materials - Instrumented Indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
    金属材料 硬度和材料参数的仪器化压痕试验 第2部分: 试验机的检验和校准
    China National Standards
    Indentation

    English PDF
    GB/T 21838.1-2008 Metallic materials - Instrumented Indentation test for hardness and materials parameters - Part 1: Test method
    金属材料 硬度和材料参数的仪器化压痕试验 第1部分:试验方法
    China National Standards
    Indentation

    English PDF
    GB/T 12825-2003 Polymeric materials,cellular flexible--Determination of hardness by Indentation technique
    高聚物多孔弹性材料 凹入度法硬度测定
    China National Standards
    Indentation

    English PDF
    GB/T 12613.3-2011 Plain bearings - Wrapped bushes - Part 3:Lubrication holes, grooves and Indentations
    滑动轴承 卷制轴套 第3部分:润滑油孔、油槽和油穴
    China National Standards
    Indentation

    English PDF
    GB/T 10807-2006 Flexible cellular polymeric materials - Determination of hardness (Indentation technique)
    软质泡沫聚合材料 硬度的测定(压陷法)
    China National Standards
    Indentation

    English PDF

    Find out:32Items   |  To Page of: First -Previous-Next -Last  | 1

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards