China National Standards

China Internal GB Standards Search


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "Internal" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 2820.8-2022 Alternating generator sets driven by reciprocating Internal combustion engines - Part 8: Requirements and tests for low power generator sets
    往复式内燃机驱动的交流发电机组 第8部分:对小功率发电机组的要求和试验
    China National Standards
    Internal

    English PDF
    GB/T 2820.1-2022 Alternating generator sets driven by reciprocating Internal combustion engines - Part 1: Purpose, rating and performance
    往复式内燃机驱动的交流发电机组 第1部分:用途、定额和性能
    China National Standards
    Internal

    English PDF
    GB 14023-2022 Vehicles, boats and Internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for protection of off-vehicle receivers
    车辆、船和内燃机 无线电骚扰特性 用于保护车外接收机的限值和测量方法
    China National Standards
    Internal

    English PDF
    GB/T 12085.8-2022 Optics and photonics - Environmental test methods - Part 8: High Internal pressure, low internal pressure, immersion
    光学和光子学 环境试验方法 第8部分:高内压、低内压、浸没
    China National Standards
    Internal

    English PDF
    GB/T 1149.8-2022 Internal combustion engines - Piston rings - Part 8: Rectangular steel rings
    内燃机 活塞环 第8部分:矩形钢环
    China National Standards
    Internal

    English PDF
    GB/T 25361.1-2022 Internal combustion engines - Piston pins - Part 1: Technical requirements
    内燃机 活塞销 第1部分:技术要求
    China National Standards
    Internal

    English PDF
    GB/T 21404-2022 Internal combustion engines - Methods of determining and measuring engine power - General requirements
    内燃机 发动机功率的确定和测量方法 一般要求
    China National Standards
    Internal

    English PDF
    GB/T 8190.6-2022 Reciprocating Internal combustion engines - Emission measurements - Part 6: Measurement results and test reports
    往复式内燃机 排放测量 第6部分:测量结果和试验报告
    China National Standards
    Internal

    English PDF
    GB/T 41517-2022 Ships and offshore technology - Ventilation of cargo spaces of vehicles capable of traveling with Internal combustion engines - Theoretical calculation of the total airflow demand
    船舶和海上技术 可行驶内燃机车辆的货舱的通风 气流总需量的理论计算
    China National Standards
    Internal

    English PDF
    GB/T 41502.1-2022 Construction machinery and equipment - Internal concrete vibrators - Part 1: Terminology and commercial specifications
    建筑施工机械与设备 内部式混凝土振动器 第1部分:术语和商业规格
    China National Standards
    Internal

    English PDF
    GB/T 26116-2022 Internal combustion engine coaxial pumps—Testing method
    内燃机共轴泵 试验方法
    China National Standards
    Internal

    English PDF
    GB/T 24141.2-2022 Rubber hoses and tubing for fuel circuits for Internal combustion engines—Specification—Part 2: Gasoline fuels
    内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分:汽油燃料
    China National Standards
    Internal

    English PDF
    GB/T 41161-2022 Reciprocating Internal combustion engines—Measurement method for combustion noise
    往复式内燃机 燃烧噪声测量方法
    China National Standards
    Internal

    English PDF
    GB/T 20969.4-2021 Special environmental condition—Machinery for plateau—Part 4:Guide rule of test for plateau natural environment—Internal combustion engines
    特殊环境条件 高原机械 第4部分:高原自然环境试验导则 内燃动力机械
    China National Standards
    Internal

    English PDF
    GB/T 20969.1-2021 Special environmental condition—Machinery for plateau—Part 1: Requirements for Internal combustion engines on plateau
    特殊环境条件 高原机械 第1部分:高原对内燃动力机械的要求
    China National Standards
    Internal

    English PDF
    GB/T 40408-2021 Nuclear grade isostatic graphite for high temperature gas-cooled reactor Internals
    高温气冷堆堆内构件用核级等静压石墨
    China National Standards
    Internal

    English PDF
    GB/T 39981-2021 Building construction machinery and equipment—Portable,hand-held,Internal combustion engine driven cut-off machines—Safety requirements
    建筑施工机械与设备 便携、手持、内燃机式切割机 安全要求
    China National Standards
    Internal

    English PDF
    GB/T 12773-2021 Valve steel and superalloy bars for Internal combustion engines
    内燃机气阀用钢及合金棒材
    China National Standards
    Internal

    English PDF
    GB/T 8243.12-2021 Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity
    内燃机全流式机油滤清器试验方法 第12部分:颗粒计数法滤清效率和容灰量
    China National Standards
    Internal

    English PDF
    GB/T 12786-2021 General technical conditions for automatic Internal combustion engine power stations
    自动化内燃机电站通用技术条件
    China National Standards
    Internal

    English PDF
    GB/T 6809.12-2021 Reciprocating Internal combustion engines—Vocabulary of components and systems—Part 12:Exhaust emission control systems
    往复式内燃机 零部件和系统术语 第12部分:排放控制系统
    China National Standards
    Internal

    English PDF
    GB/T 1149.6-2021 Internal combustion engines—Piston rings—Part 6: Scraper rings made of cast iron
    内燃机 活塞环 第6部分:铸铁刮环
    China National Standards
    Internal

    English PDF
    GB/T 1149.4-2021 Internal combustion engines—Piston rings—Part 4:Quality requirements
    内燃机 活塞环 第4部分:质量要求
    China National Standards
    Internal

    English PDF
    GB/T 23258-2020 Standard practice controlling Internal corrosion in steel pipelines and piping systems
    钢质管道内腐蚀控制规范
    China National Standards
    Internal

    English PDF
    GB/T 3221-2020 Code for mooring and sea trials of Internal combustion engine-driven inland ships
    内燃机动力内河船舶系泊和航行试验大纲
    China National Standards
    Internal

    English PDF
    GB/T 38750.2-2020 Reciprocating Internal combustion engine energy efficiency evaluating specifications—Part 2:Gasoline engines
    往复式内燃机能效评定规范 第2部分:汽油机
    China National Standards
    Internal

    English PDF
    GB/T 38750.1-2020 Reciprocating Internal combustion engine energy efficiency evaluating specifications—Part 1:Diesel engines
    往复式内燃机能效评定规范 第1部分:柴油机
    China National Standards
    Internal

    English PDF
    GB/T 8243.14-2020 Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 14:Cold start simulation and hydraulic pulse durability for composite filter housings
    内燃机全流式机油滤清器试验方法 第14部分:复合材料滤清器的冷起动模拟和液压脉冲耐久试验
    China National Standards
    Internal

    English PDF
    GB/T 38296-2019 Internal connecting wires and cables of electrical equipments
    电器设备内部连接线缆
    China National Standards
    Internal

    English PDF
    GB/T 38340-2019 Small craft—Reciprocating Internal combustion engines exhaust emission measurement—Test-bed measurement of gaseous and particulate exhaust emissions
    小艇 往复式内燃机排放测量 气体和颗粒排放物的试验台测量
    China National Standards
    Internal

    English PDF
    GB/T 37296-2019 Safety design code for reciprocating Internal combustion engine gas power plant
    往复式内燃燃气电站安全设计规范
    China National Standards
    Internal

    English PDF
    GB/T 11024.4-2019 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V—Part 4:Internal fuses
    标称电压1 000 V以上交流电力系统用并联电容器 第4部分:内部熔丝
    China National Standards
    Internal

    English PDF
    GB/T 6809.11-2018 Reciprocating Internal combustion engines—Vocabulary of components and systems—Part 11: Fuel systems
    往复式内燃机-零部件和系统术语-第11部分:燃油系统
    China National Standards
    Internal

    English PDF
    GB/T 37089-2018 Reciprocating Internal combustion engine driven alternating current generating sets—Controller
    往复式内燃机驱动的交流发电机组-控制器
    China National Standards
    Internal

    English PDF
    GB/T 20651.1-2018 Reciprocating Internal combustion engines—Safety—Part 1: Compression ignition engines
    往复式内燃机-安全-第1部分:压燃式发动机
    China National Standards
    Internal

    English PDF
    GB/T 14906-2018 Classification of Internal combustion engine oils viscosity
    内燃机油黏度分类
    China National Standards
    Internal

    English PDF
    GB/T 6809.10-2018 Reciprocating Internal combustion engines—Vocabulary of components and systems—Part 10: Ignition systems
    往复式内燃机-零部件和系统术语-第10部分:点火系统
    China National Standards
    Internal

    English PDF
    GB/T 1147.1-2017/XG1-2018 Small and medium power Internal combustion engines - Part 1:General requirements
    《中小功率内燃机-第1部分:通用技术条件》国家标准第1号修改单
    China National Standards
    Internal

    English PDF
    GB/T 8190.8-2018 Reciprocating Internal combustion engines—Exhaust emission measurement—Part 8:Engine group determination
    往复式内燃机-排放测量-第8部分:发动机系组的确定
    China National Standards
    Internal

    English PDF
    GB/T 6314-2018 Internal micrometer with three-point contact
    三爪内径千分尺
    China National Standards
    Internal

    English PDF
    GB/T 22093-2018 Internal micrometer with electronic digital display
    电子数显内径千分尺
    China National Standards
    Internal

    English PDF
    GB/T 18655-2018 Vehicles, boats and Internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers
    车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法
    China National Standards
    Internal

    English PDF
    GB/T 14097-2018 Reciprocating Internal combustion engines—Limit values of emitted noise
    往复式内燃机 噪声限值
    China National Standards
    Internal

    English PDF
    GB/T 23340-2018 Internal combustion engines—Connecting-rods—Specification
    内燃机 连杆 技术条件
    China National Standards
    Internal

    English PDF
    GB/T 8243.5-2018 Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 5: Test for cold start simulation and hydraulic pulse durability
    内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验
    China National Standards
    Internal

    English PDF
    GB/T 6111-2018 Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to Internal pressure
    流体输送用热塑性塑料管道系统 耐内压性能的测定
    China National Standards
    Internal

    English PDF
    GB/T 23338-2018 Internal combustion engines—Charge air coolers—Specification
    内燃机 增压空气冷却器 技术条件
    China National Standards
    Internal

    English PDF
    GB/T 23339-2018 Internal combustion engines—Crankshafts—Specification
    内燃机 曲轴 技术条件
    China National Standards
    Internal

    English PDF
    GB/T 8243.15-2018 Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 15: Vibration fatigue test for composite filter housings
    内燃机全流式机油滤清器试验方法 第15部分:复合材料滤清器的振动疲劳试验
    China National Standards
    Internal

    English PDF
    GB/T 8190.7-2018 Reciprocating Internal combustion engines—Exhaust emission measurement—Part 7:Engine family determination
    往复式内燃机 排放测量 第7部分:发动机系族的确定
    China National Standards
    Internal

    English PDF
    GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and Internal quality control—Method on reporting qualitative test reports
    化学分析方法验证确认和内部质量控制实施指南 报告定性结果的方法
    China National Standards
    Internal

    English PDF
    GB/T 6188-2017 Hexalobular Internal driving feature for bolts and screws
    螺栓和螺钉用内六角花形
    China National Standards
    Internal

    English PDF
    GB/T 35657-2017 Guideline for verification and validation of chemical analysis method and Internal quality control-Metal component analysis based on sample digestion
    化学分析方法验证确认和内部质量控制实施指南 基于样品消解的金属组分分析
    China National Standards
    Internal

    English PDF
    GB/T 35655-2017 Guideline for verification and validation of chemical analysis method and Internal quality control—Chromatography
    化学分析方法验证确认和内部质量控制实施指南 色谱分析
    China National Standards
    Internal

    English PDF
    GB/T 33928-2017 Reciprocating Internal combustion engines—Measurement method for exhaust silencers—Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio
    往复式内燃机 排气消声器测量方法 声压法排气噪声声功率级和插入损失及功率损失比
    China National Standards
    Internal

    English PDF
    GB/T 8190.9-2017 Reciprocating Internal combustion engines—Exhaust emission measurement—Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
    往复式内燃机 排放测量 第9部分:压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程
    China National Standards
    Internal

    English PDF
    GB/T 8188-2017 Reciprocating Internal combustion engines—Emissions terminology and nomenclature
    往复式内燃机 排放术语和定义
    China National Standards
    Internal

    English PDF
    GB/T 1149.15-2017 Internal combustion engines—Piston rings—Part 15: Coil-spring-loaded oil control rings of narrow width made of cast iron
    内燃机 活塞环 第15部分:薄型铸铁螺旋撑簧油环
    China National Standards
    Internal

    English PDF
    GB/T 18948-2017 Rubber hoses and tubing for cooling systems for Internal-combustion engines—Specification
    内燃机冷却系统用橡胶软管和纯胶管 规范
    China National Standards
    Internal

    English PDF
    GB/T 34618-2017 Temperature detection method for judging Internal leakage faults of working valves in steam drainage steam
    蒸汽疏水系统在线阀门内漏温度检测方法
    China National Standards
    Internal

    English PDF
    GB/T 34349-2017 External inspection methodology for Internal corrosion of natural gas pipelines
    输气管道内腐蚀外检测方法
    China National Standards
    Internal

    English PDF
    GB/T 34350-2017 External inspection methodology for Internal corrosion of liquid petroleum pipelines
    输油管道内腐蚀外检测方法
    China National Standards
    Internal

    English PDF
    GB/T 1147.1-2017 Small and medium power Internal combustion engines—Part 1: General requirements
    中小功率内燃机 第1部分:通用技术条件
    China National Standards
    Internal

    English PDF
    GB/T 1147.2-2017 Small and medium power Internal combustion engines—Part 2: Test methods
    中小功率内燃机 第2部分:试验方法
    China National Standards
    Internal

    English PDF
    GB/T 8243.7-2017 Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 7:Vibration fatigue test
    内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验
    China National Standards
    Internal

    English PDF
    GB/T 8243.6-2017 Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 6: Static burst pressure test
    内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验
    China National Standards
    Internal

    English PDF
    GB/T 1859.4-2017 Reciprocating Internal combustion engines—Measurement of sound power levels using sound pressure—Part 4:Survey method using a reference sound source
    往复式内燃机 声压法声功率级的测定 第4部分:使用标准声源简易法
    China National Standards
    Internal

    English PDF
    GB/T 33347-2016 Reciprocating Internal combustion gas generating set—Classification and constituent analysis of gas fuels
    往复式内燃燃气发电机组 气体燃料分类及组分分析方法
    China National Standards
    Internal

    English PDF
    GB/T 33349-2016 General specification for gas electric power plant system with reciprocating Internal combustion engines
    往复式内燃燃气电站系统通用技术条件
    China National Standards
    Internal

    English PDF
    GB/T 18859-2016 Enclosed low-voltage switchgear and controlgear assemblies—Guide for testing under conditions of arcing due to Internal fault
    封闭式低压成套开关设备和控制设备 在内部故障引起电弧情况下的试验导则
    China National Standards
    Internal

    English PDF
    GB/T 33340-2016 Reciprocating Internal combustion gas generating set-Technical code on safety
    往复式内燃燃气发电机组 安全设计规范
    China National Standards
    Internal

    English PDF
    GB/T 32774-2016 X-ray inspection method for Internal structure characteristics of wood door
    木质门内部结构特征X射线检测方法
    China National Standards
    Internal

    English PDF
    GB/Z 18859-2002 Enclosed low-voltage switchgaer and controlgaer Assemblies--Guide for testing under conditions of arcing due to Internal fault
    封闭式低压成套开关设备和控制设备在内部故障引起电弧情况下的试验导则
    China National Standards
    Internal

    English PDF
    GB/T 9933-1988 The test method for evaluating the performance of Internal combustion engine oil (Caterpillar 1G2 method)
    内燃机油性能评定法 (开特皮勒1G2法)
    China National Standards
    Internal

    English PDF
    GB/T 9932-1988 The test method for evaluating the performance of Internal combustion engine oil (Caterpillar 1H2 method)
    内燃机油性能评定法(开特皮勒1H2法)
    China National Standards
    Internal

    English PDF
    GB/T 9707-2010 Rubber Internal mixers & plastics internal mixers
    密闭式炼胶机炼塑机
    China National Standards
    Internal

    English PDF
    GB/T 902.4-2010 Threaded studs with flange (pitch)and stud with Internal thread for short-cycle drawn arc stud welding
    短周期电弧螺柱焊用焊接螺柱
    China National Standards
    Internal

    English PDF
    GB/T 861.2-1987 Serrated lock washers Internal teeth
    内锯齿锁紧垫圈
    China National Standards
    Internal

    English PDF
    GB/T 861.1-1987 Lock washers Internal teeth
    内齿锁紧垫圈
    China National Standards
    Internal

    English PDF
    GB/T 8243.9-2012 Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests
    内燃机全流式机油滤清器试验方法 第9部分:进、出口止回阀试验
    China National Standards
    Internal

    English PDF
    GB/T 8243.7-2006 Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 7: Vibration fatigue test
    内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验
    China National Standards
    Internal

    English PDF
    GB/T 8243.6-2006 Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 6: Static burst pressure test
    内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验
    China National Standards
    Internal

    English PDF
    GB/T 8243.5-2006 Methods of test for full-flow lubricating oil filters for Internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test
    内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验
    China National Standards
    Internal

    English PDF
    GB/T 8243.4-2003 Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 4: Initial particle retention efficiency,life and cumulative efficiency(gravimetric method)
    内燃机全流式机油滤清器试验方法 第4部分: 原始滤清效率、寿命和累积效率(重量法)
    China National Standards
    Internal

    English PDF
    GB/T 8243.3-2003 Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 3: Resistance to high differential pressure and to elevated temperature
    内燃机全流式机油滤清器试验方法 第3部分: 耐高压差和耐高温特性
    China National Standards
    Internal

    English PDF
    GB/T 8243.2-2003 Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 2: Element by-pass valve characteristics
    内燃机全流式机油滤清器试验方法 第2部分: 滤芯旁通阀特性
    China National Standards
    Internal

    English PDF
    GB/T 8243.13-2015 Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 13: Static burst pressure test for composite filter housings
    内燃机全流式机油滤清器试验方法 第13部分:复合材料滤清器的静压耐破度试验
    China National Standards
    Internal

    English PDF
    GB/T 8243.12-2007 Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity
    内燃机全流式机油滤清器试验方法 第12部分:采用颗粒计数法测定滤清效率和容灰量
    China National Standards
    Internal

    English PDF
    GB/T 8243.1-2003 Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 1: Differential pressure/flow characteristics
    内燃机全流式机油滤清器试验方法 第1部分:压差-流量特性
    China National Standards
    Internal

    English PDF
    GB/T 8243.11-2007 Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 11: Self-cleaning filters
    内燃机全流式机油滤清器试验方法 第11部分:自净式滤清器
    China National Standards
    Internal

    English PDF
    GB/T 8190.9-2010 Reciprocating Internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
    往复式内燃机 排放测量 第9部分:压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程
    China National Standards
    Internal

    English PDF
    GB/T 8190.8-2003 Reciprocating Internal combustion engines--Exhaust emission measurement--Part 8: Engine group determination
    往复式内燃机 排放测量 第8部分: 发动机系组的确定
    China National Standards
    Internal

    English PDF
    GB/T 8190.7-2003 Reciprocating Internal combustion engines--Exhaust emission measurement--Part 7: Engine family determination
    往复式内燃机 排放测量 第7部分: 发动机系族的确定
    China National Standards
    Internal

    English PDF
    GB/T 8190.6-2006 Reciprocating Internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test
    往复式内燃机 排放测量 第6部分:测量结果和试验报告
    China National Standards
    Internal

    English PDF
    GB/T 8190.5-2011 Reciprocating Internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
    往复式内燃机 排放测量 第5部分:试验燃料
    China National Standards
    Internal

    English PDF
    GB/T 8190.4-2010 Reciprocating Internal combustion engines - Exhaust emission measurement - Part 4: Steady-state test cycles for different engine applications
    往复式内燃机 排放测量 第4部分:不同用途发动机的稳态试验循环
    China National Standards
    Internal

    English PDF
    GB/T 8190.3-2003 Reciprocating Internal combustion engines--Exhaust emission measurement--Part 3:Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
    往复式内燃机 排放测量 第3部分: 稳态工况排气烟度的定义和测量方法
    China National Standards
    Internal

    English PDF
    GB/T 8190.2-2011 Reciprocating Internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site
    往复式内燃机 排放测量 第2部分:气体和颗粒排放物的现场测量
    China National Standards
    Internal

    English PDF
    GB/T 8190.1-2010 Reciprocating Internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
    往复式内燃机 排放测量 第1部分:气体和颗粒排放物的试验台测量
    China National Standards
    Internal

    English PDF
    GB/T 8190.11-2009 Reciprocating Internal combustion engines - Exhaust emission measurement - Part 11: Test-bet measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
    往复式内燃机 排放测量 第11部分:非道路移动机械用发动机瞬态工况下气体和颗粒排放物的试验台测量
    China National Standards
    Internal

    English PDF

    Find out:286Items   |  To Page of: First -Previous-Next -Last  | 1 2 3

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards