GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 33946-2017 |
Copper alloy profile,bar for the electroMagnetic launch assembly 电磁推射装置用铜合金型、棒材 |
China National Standards M |
English PDF |
GB/T 33948.2-2017 |
Method for chemical analysis of copper-steel composite metal—Part 2:Determination of zinc content—Na2EDTA titration method 铜-钢复合金属化学分析方法 第2部分:锌含量的测定 Na2EDTA滴定法 |
China National Standards M |
English PDF |
GB/T 33945-2017 |
Rods of chroMium zirconium copper for engine commutator 电机整流子换向片用铬锆铜棒材 |
China National Standards M |
English PDF |
GB/Z 33902-2017 |
Measurement of fluid flow by means of pressure differential devices—Guidelines on the effect of departure from the specifications and operating conditions given in GB/T 2624 and the correction methods 使用差压装置测量流体流量 偏离GB/T2624给出的要求和工作条件的影响及其修正方法 |
China National Standards M |
English PDF |
GB/T 33905.3-2017 |
Intelligent sensor—Part 3: TerMinology 智能传感器 第3部分:术语 |
China National Standards M |
English PDF |
GB/T 33901-2017 |
Identifier protocol for instruMent of industrial internet of things 工业物联网仪表身份标识协议 |
China National Standards M |
English PDF |
GB/T 33903-2017 |
AutoMatic solar tracker of shading ball model for diffuse radiation measurement 散射辐射测量用遮光球式全自动太阳跟踪器 |
China National Standards M |
English PDF |
GB/T 33907-2017 |
Electrolytic solid Moisture meter 电解法固体水分测量仪 |
China National Standards M |
English PDF |
GB/T 33879-2017 |
Multi-way precision die forgings—General specification 多向精密模锻件 通用技术条件 |
China National Standards M |
English PDF |
GB/T 33877-2017 |
Non-destructive testing—Test Method for comparing the brightness of fluorescent penetrants 无损检测 荧光渗透剂亮度测定方法 |
China National Standards M |
English PDF |
GB/T 22381-2017 |
Cable connections between gas-insulated Metal-enclosed switchgear for rated voltages equal to and above 72.5kV and fluid-filled and extruded insulation power cables—Fluid-filled and dry type cable-terminations 额定电压72.5kV及以上气体绝缘金属封闭开关设备与充流体及挤包绝缘电力电缆的连接 充流体及干式电缆终端 |
China National Standards M |
English PDF |
GB/T 22382-2017 |
Direct connection between power transforMers and gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above 额定电压72.5 kV 及以上气体绝缘金属封闭开关设备与电力变压器之间的直接连接 |
China National Standards M |
English PDF |
GB/T 33977-2017 |
Methods to quantify the steady state, power-frequency electrimagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations 高压成套开关设备和高压/低压预装式变电站产生的稳态、工频电磁场的量化方法 |
China National Standards M |
English PDF |
GB/T 16462.3-2017 |
Test conditions for nuMerically controlled turning machines and turning centres—Part 3: Geometric tests for machines with inverted vertical work-holding spindles 数控车床和车削中心检验条件 第3部分:倒置立式机床几何精度检验 |
China National Standards M |
English PDF |
GB/T 16462.2-2017 |
Test conditions for nuMerically controlled turning machines and turning centers—Part 2: Geometric tests for machines with a vertical workholding spindle 数控车床和车削中心检验条件 第2部分:立式机床几何精度检验 |
China National Standards M |
English PDF |
GB/T 16462.5-2017 |
Test conditions for nuMerically controlled turning machines and turning centers—Part 5: Accuracy of feeds, speeds and interpolations 数控车床和车削中心检验条件 第5部分:进给率、速度和插补精度检验 |
China National Standards M |
English PDF |
GB/T 16462.6-2017 |
Test conditions for nuMerically controlled turning machines and turning centers—Part 6: Accuracy of a finished test piece 数控车床和车削中心检验条件 第6部分:精加工试件精度检验 |
China National Standards M |
English PDF |
GB/T 10180-2017 |
TherMal performance test code for industrial boilers 工业锅炉热工性能试验规程 |
China National Standards M |
English PDF |
GB/T 34018-2017 |
Non-destructive testing—Test Method for scanning ultrasonic microscopy 无损检测 超声显微检测方法 |
China National Standards M |
English PDF |
GB/T 6113.201-2017 |
Specification for radio disturbance and iMmunity measuring apparatus and methods—Part 2-1: Methods of measurement of disturbances and immunity—Conducted disturbance measurements 无线电骚扰和抗扰度测量设备和测量方法规范 第2-1 部分:无线电骚扰和抗扰度测量方法 传导骚扰测量 |
China National Standards M |
English PDF |
GB/T 23751.2-2017 |
Micro fuel cell power systems-Part 2: Performance test methods 微型燃料电池发电系统 第2部分: 性能试验方法 |
China National Standards M |
English PDF |
GB/T 33979-2017 |
Test Methods for proton exchange membrane fuel cell power system at subzero environment 质子交换膜燃料电池发电系统低温特性测试方法 |
China National Standards M |
English PDF |
GB/T 33978-2017 |
Proton exchange Membrane fuel cell modules for road vehicles 道路车辆用质子交换膜燃料电池模块 |
China National Standards M |
English PDF |
GB/T 3787-2017 |
Technical safety code for Management, operation, inspection and maintenance of hand-held motor-operated electric tools 手持式电动工具的管理、使用、检查和维修安全技术规程 |
China National Standards M |
English PDF |
GB/T 33940-2017 |
Safety of Machinery—Guide for safety design and lean manufacturing 机械安全 安全设计与精益制造指南 |
China National Standards M |
English PDF |
GB/T 33941.1-2017 |
Earth-Moving machinery—Structure stress test method—Part 1: General principles 土方机械 结构件应力测试方法 第1部分:通则 |
China National Standards M |
English PDF |
GB/T 4857.17-2017 |
Packaging—Basic tests for tansport packages—Part 17: General rules for the coMpilation of performance test 包装 运输包装件基本试验 第17部分:编制性能试验大纲的通用规则 |
China National Standards M |
English PDF |
GB/T 21361-2017 |
Motor vehicle air-conditioning unit 汽车用空调器 |
China National Standards M |
English PDF |
GB/T 34003-2017 |
Detection Method of impurity elements in boron nitride 氮化硼中杂质元素测定方法 |
China National Standards M |
English PDF |
GB/T 33942-2017 |
Guidelines for the preparation of eMergency response plan for special equipment accident 特种设备事故应急预案编制导则 |
China National Standards M |
English PDF |
GB/T 9074.18-2017 |
Tapping screw and washer asseMblies with plain washers 自攻螺钉和平垫圈组合件 |
China National Standards M |
English PDF |
GB/T 33950-2017 |
The continous roll-casting strips of aluMinium and aluminium alloy 铝及铝合金铸轧带材 |
China National Standards M |
English PDF |
GB/T 33949-2017 |
Copper alloy ring Material for bearing cage 轴承保持架用铜合金环材 |
China National Standards M |
English PDF |
GB/T 33948.1-2017 |
Method for chemical analysis of copper-steel composite metal—Part 1:Determination of copper content—Iodine titration method 铜-钢复合金属化学分析方法 第1部分:铜含量的测定 碘量法 |
China National Standards M |
English PDF |
GB/T 32076.9-2017 |
High-strength structural bolting asseMblies for preloading—Part 9: Torshear type bolt with hexagon head with large width across flats,and nut assemblies 预载荷高强度栓接结构连接副 第9部分:扭剪型大六角头螺栓和螺母连接副 |
China National Standards M |
English PDF |
GB/T 33943-2017 |
High-strength structural anchor bolting asseMblies for steel structures 钢结构用高强度锚栓连接副 |
China National Standards M |
English PDF |
GB/T 17791-2017 |
SeaMless copper and copper alloys tube for air conditioner and refrigeration equipment 空调与制冷设备用铜及铜合金无缝管 |
China National Standards M |
English PDF |
GB/T 20319-2017 |
Wind turbine generator systeMs—Specification for acceptance 风力发电机组 验收规范 |
China National Standards M |
English PDF |
GB/T 33920-2017 |
Test Method for flexible graphite sheets 柔性石墨板试验方法 |
China National Standards M |
English PDF |
GB/T 33921-2017 |
Underground rubber-tyred Mining machines—Performance requirements and test procedures for brake systems 地下轮胎式采矿车辆 制动系统的性能要求和试验方法 |
China National Standards M |
English PDF |
GB/T 8423.5-2017 |
PetroleuM and natural gas industries terminology—Part 5:Equipment and material 石油天然气工业术语 第5部分:设备与材料 |
China National Standards M |
English PDF |
GB/Z 17799.6-2017 |
ElectroMagnetic compatibility—Generic standards—Immunity for power station and substation environments 电磁兼容 通用标准 发电厂和变电站环境中的抗扰度 |
China National Standards M |
English PDF |
GB/T 33984-2017 |
Motor soft-start device—Terminology 电动机软起动装置 术语 |
China National Standards M |
English PDF |
GB/T 33985-2017 |
Guide on inclusion of safety aspects in electrotechnical product standards—Involving risk assessMent aspects 电工产品标准中包括安全方面的导则 引入风险评估的因素 |
China National Standards M |
English PDF |
GB/T 33981-2017 |
Standard practice for the Measurement of sound pressure levels on high-voltage alternating current circuit-breakers 高压交流断路器声压级测量的标准规程 |
China National Standards M |
English PDF |
GB/T 27748.4-2017 |
Stationary fuel cell power systeMs Part 4: Performance test methods for small fuel cell power systems 固定式燃料电池发电系统 第4部分:小型燃料电池发电系统性能试验方法 |
China National Standards M |
English PDF |
GB/T 17626.7-2017 |
ElectroMagnetic compatibility—Testing and measurement techniques—General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto 电磁兼容 试验和测量技术 供电系统及所连设备谐波、间谐波的测量和测量仪器导则 |
China National Standards M |
English PDF |
GB/T 33952-2017 |
Copper clad aluMinum tube 铜包铝管 |
China National Standards M |
English PDF |
GB/T 33951-2017 |
Copper alloy rod and wire for precision telecoMmunications equipment and instrument 精密仪器仪表和电讯器材用铜合金棒线 |
China National Standards M |
English PDF |
GB/T 1149.15-2017 |
Internal coMbustion engines—Piston rings—Part 15: Coil-spring-loaded oil control rings of narrow width made of cast iron 内燃机 活塞环 第15部分:薄型铸铁螺旋撑簧油环 |
China National Standards M |
English PDF |
GB/T 20108-2017 |
Low teMperature unitary air conditioner 低温单元式空调机 |
China National Standards M |
English PDF |
GB/T 7932-2017 |
PneuMatic fluid power-General rules and safety requirements for systems and their components 气动 对系统及其元件的一般规则和安全要求 |
China National Standards M |
English PDF |
GB/T 33924-2017 |
Mounting dimensions of rod-end spherical eyes for pneumatic cylinders 气缸活塞杆端球面耳环安装尺寸 |
China National Standards M |
English PDF |
GB/T 33923-2017 |
Design Methods for planetary gear drives 行星齿轮传动设计方法 |
China National Standards M |
English PDF |
GB/T 33922-2017 |
Wafer level test Methods for MEMS piezoresistive pressure-sensitive die performances MEMS压阻式压力敏感芯片性能的圆片级试验方法 |
China National Standards M |
English PDF |
GB/T 33983.2-2017 |
Direct Methanol fuel cell system—Part 2:Performance test method 直接甲醇燃料电池系统 第2部分:性能试验方法 |
China National Standards M |
English PDF |
GB/T 34014-2017 |
Coding regulation for autoMotive traction battery 汽车动力蓄电池编码规则 |
China National Standards M |
English PDF |
GB/T 34016-2017 |
Generality of rat and terMite proof wires and cables 防鼠和防蚁电线电缆通则 |
China National Standards M |
English PDF |
GB/T 34013-2017 |
DiMension of traction battery for electric vehicles 电动汽车用动力蓄电池产品规格尺寸 |
China National Standards M |
English PDF |
GB/T 33595-2017 |
Motor soft-start device—Method of type designation 电动机软起动装置 型号编制方法 |
China National Standards M |
English PDF |
GB/T 34029-2017 |
Boiler furnace Maintenance elevating platform 锅炉炉膛检修升降平台 |
China National Standards M |
English PDF |
GB/T 33937-2017 |
Hard stone iMpact crusher-Energy consumption index 硬岩反击式破碎机 能耗指标 |
China National Standards M |
English PDF |
GB/T 33939-2017 |
Vertical roller Mill—Casting liner of the grinding roller and the grinding table—Requirement 立式辊磨机 磨辊与磨盘铸造衬板 技术条件 |
China National Standards M |
English PDF |
GB/T 8190.9-2017 |
Reciprocating internal coMbustion engines—Exhaust emission measurement—Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第9部分:压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程 |
China National Standards M |
English PDF |
GB/T 8188-2017 |
Reciprocating internal coMbustion engines—Emissions terminology and nomenclature 往复式内燃机 排放术语和定义 |
China National Standards M |
English PDF |
GB/T 15969.3-2017 |
PrograMmable controllers—Part 3: Programming languages 可编程序控制器 第3部分:编程语言 |
China National Standards M |
English PDF |
GB/T 33885-2017 |
Non-destructive testing instruMents—General requirements for sampling,routine inspection and type inspection 无损检测仪器 抽样、出厂检验、型式检验基本要求 |
China National Standards M |
English PDF |
GB/T 33869-2017 |
CoMparison method for absolute pyrheliometer 绝对直接辐射表比对方法 |
China National Standards M |
English PDF |
GB/T 33874-2017 |
EnvironMental protection requirements for toner manufacturing processes and products 墨粉制造过程及产品环境保护要求 |
China National Standards M |
English PDF |
GB/T 15670.26-2017 |
Toxicological test Methods for pesticides registration—Part 26: Chronic toxicity study 农药登记毒理学试验方法 第26部分:慢性毒性试验 |
China National Standards M |
English PDF |
GB/T 13213-2017 |
Canned pork Mince 猪肉糜类罐头 |
China National Standards M |
English PDF |
GB/T 22731-2017 |
Fragrance coMpound 日用香精 |
China National Standards M |
English PDF |
GB/T 33917-2017 |
Essential oils-Analysis by gas chroMatography on chiral capillary columns-General method 精油 手性毛细管柱气相色谱分析 通用法 |
China National Standards M |
English PDF |
GB/T 15670.17-2017 |
Toxicological test Methods for pesticides registration—Part 17: Mammalian spermatogonial/spermatocyte chromosome aberration test 农药登记毒理学试验方法 第17部分:哺乳动物精原细胞/精母细胞染色体畸变试验 |
China National Standards M |
English PDF |
GB/T 15670.22-2017 |
Toxicological test Methods for pesticides registration—Part 22:DNA damage and repair/unscheduled DNA synthesis in mammalian cells in vitro 农药登记毒理学试验方法 第22部分:体外哺乳动物细胞DNA损害与修复/程序外DNA合成试验 |
China National Standards M |
English PDF |
GB/T 15670.20-2017 |
Toxicological test Methods for pesticides registration—Part 20: In vitro mammalian cell gene mutation test 农药登记毒理学试验方法 第20部分:体外哺乳动物细胞基因突变试验 |
China National Standards M |
English PDF |
GB/T 15670.23-2017 |
Toxicological test Methods for pesticides registration—Part 23: Teratogenicity study 农药登记毒理学试验方法 第23部分:致畸试验 |
China National Standards M |
English PDF |
GB/T 15670.19-2017 |
Toxicological test Methods for pesticides registration—Part 19: In vitro mammalian cells chromosome aberration test 农药登记毒理学试验方法 第19部分:体外哺乳动物细胞染色体畸变试验 |
China National Standards M |
English PDF |
GB/T 33996-2017 |
Hierarchy and noMenclature of lunar exploration data products 月球探测数据产品分级与命名 |
China National Standards M |
English PDF |
GB/T 6031-2017 |
Rubber, vulcanized or therMoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD) 硫化橡胶或热塑性橡胶 硬度的测定(10IRHD~100IRHD) |
China National Standards M |
English PDF |
GB/T 33986-2017 |
InforMation description of product for electronic commerce transaction—Plastic product in contact with foodstuff 电子商务交易产品信息描述 食品接触塑料制品 |
China National Standards M |
English PDF |
GB/T 34114-2017 |
General specification for electroMagnetic brake for motor 电动机用电磁制动器通用技术条件 |
China National Standards M |
English PDF |
GB/T 4754-2017 |
Industrial classification for national econoMic activities 国民经济行业分类 |
China National Standards M |
English PDF |
GB 24849-2017 |
Minimum allowable values of energy efficiency and energy efficiency grades for household and similar microwave ovens 家用和类似用途微波炉能效限定值及能效等级 |
China National Standards M |
English PDF |
GB/T 15345-2017 |
Test Methods of concrete pipes for water transmission 混凝土输水管试验方法 |
China National Standards M |
English PDF |
GB/T 13477.15-2017 |
Test Method for building sealants—Part 15:Determination of adhesion/cohesion properties after exposure to heat and artificial light through glass and to water 建筑密封材料试验方法 第15部分:经过热、透过玻璃的人工光源和水曝露后粘结性的测定 |
China National Standards M |
English PDF |
GB/T 13477.11-2017 |
Test Method for building sealants—Part 11:Determination of tensile properties at maintained extension after immersion in wates 建筑密封材料试验方法 第11部分:浸水后定伸粘结性的测定 |
China National Standards M |
English PDF |
GB/T 519-2017 |
Test Methods for measuring physical properties of pneumatic tyres 充气轮胎物理性能试验方法 |
China National Standards M |
English PDF |
GB/T 33833-2017 |
Urban heat service + No.1 Modification sheet 城镇供热服务+《第1号修改单》 |
China National Standards M |
English PDF |
GB/T 33837-2017 |
Coated glass fiber products—DeterMination of the tension-tension fatigue properties 玻璃纤维涂覆制品 拉-拉疲劳性能的测定 |
China National Standards M |
English PDF |
GB/T 13477.4-2017 |
Test Method for building sealants—Part 4:Determination of extrudability of one-component sealants 建筑密封材料试验方法 第4部分:原包装单组分密封材料挤出性的测定 |
China National Standards M |
English PDF |
GB/T 33834-2017 |
Microbeam analysis—Scanning electron microscopy—Scanning electron microscope analysis of biological specimens 微束分析 扫描电子显微术 生物试样扫描电子显微镜分析方法 |
China National Standards M |
English PDF |
GB/T 33835-2017 |
Test Method of impact strength for friction material 摩擦材料冲击强度试验方法 |
China National Standards M |
English PDF |
GB/T 13477.9-2017 |
Test Method for building sealants—Part 9:Determination of adhesion/cohesion properties after immersion in water 建筑密封材料试验方法 第9部分:浸水后拉伸粘结性的测定 |
China National Standards M |
English PDF |
GB/T 33829-2017 |
Test Method for snow grip performance of passenger car tyres 轿车轮胎雪地抓着性能试验方法 |
China National Standards M |
English PDF |
GB/T 33830-2017 |
Test Method for snow grip performance of truck & bus tyres 载重汽车轮胎雪地抓着性能试验方法 |
China National Standards M |
English PDF |
GB/T 33832-2017 |
DeterMination of water resistance of glass fiber 玻璃纤维耐水性的测定 |
China National Standards M |
English PDF |
GB/T 13477.3-2017 |
Test Method for building sealants—Part 3:Determination of extrudability of sealants using standardized apparatus 建筑密封材料试验方法 第3部分:使用标准器具测定密封材料挤出性的方法 |
China National Standards M |
English PDF |
GB/T 33831-2017 |
Coated glass fiber products—DeterMination of resistance to creasing and folding behaviour 玻璃纤维涂覆制品 耐压折性能的测定 |
China National Standards M |
English PDF |
GB/T 13477.10-2017 |
Test Method for building sealants—Part 10:Determination of tensile properties at maintained extension 建筑密封材料试验方法 第10部分:定伸粘结性的测定 |
China National Standards M |
English PDF |
Find out:46298Items | To Page of: First -Previous-Next -Last | [142] [143] [144] [145] [146] [147] [148] |