Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 16260.2-2006 |
Software engineering - Product quality - Part 2: External Metrics 软件工程 产品质量 第2部分:外部度量 |
China National Standards M |
 English PDF |
| GB/T 16260.1-2006 |
Software engineering - Product quality - Part 1: Quality Model 软件工程 产品质量 第1部分:质量模型 |
China National Standards M |
English PDF |
| GB/T 11457-2006 |
InforMation technology Software engineering terminology 信息技术 软件工程术语 |
China National Standards M |
English PDF |
| GB/T 10001.5-2006 |
Public inforMation graphical symbols for use on sign - Part 5: Symbols for shopping 标志用公共信息图形符号 第5部分: 购物符号 |
China National Standards M |
English PDF |
| GB 12995-2006 |
CoMbustion-motor-driven wheelchairs 机动轮椅车 |
China National Standards M |
English PDF |
| GB/T 20405.5-2006 |
Urine-absorbing aids for incontinence―Test Methods for characterizing Polymer-based absorbent materials―Part 5: Gravimetric determination of free swell capacity in saline solution 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第5部分：在生理盐水中用称重法测定吸水率 |
China National Standards M |
English PDF |
| GB/T 20405.4-2006 |
Urine-absorbing aids for incontinence―Test Methods for characterizing Polymer-based absorbent materials―Part 4: Determination of moisture content by mass loss upon heating 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第4部分 加热失重法对水份含量的测定 |
China National Standards M |
English PDF |
| GB/T 20405.3-2006 |
Urine-absorbing aids for incontinence―Test Methods for characterizing Polymer-based absorbent materials―Part 3: Determination of particle size distribution by sieve fractionation 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第3部分：筛分法对粒径分布的测定 |
China National Standards M |
English PDF |
| GB/T 20405.2-2006 |
Urine-absorbing aids for incontinence―Test Methods for characterizing Polymer-based absorbent materials―Part 2: Determination of amount of residual monomers 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第2部分：单体残留的测定 |
China National Standards M |
English PDF |
| GB/T 20405.1-2006 |
Urine-absorbing aids for incontinence―Test Methods for characterizing Polymer-based absorbent materials―Part 1: Determination of PH 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第1部分：PH值的测定 |
China National Standards M |
English PDF |
| GB/T 20135-2006 |
Intelligent transport systeMs Electronic toll collection System architecture 智能运输系统 电子收费 系统框架模型 |
China National Standards M |
English PDF |
| GB/T 20134-2006 |
Road traffic inforMation collection - Incident message sets 道路交通信息采集 事件信息集 |
China National Standards M |
English PDF |
| GB/T 20133-2006 |
Road traffic inforMation collection - Classification and code of message 道路交通信息采集 信息分类与编码 |
China National Standards M |
English PDF |
| GB/T 20132-2006 |
Ships and Marine technology -- Low-location lighting on passenger ships -- Arrangement 船舶与海上技术 客船低位照明 布置 |
China National Standards M |
English PDF |
| GB/T 17273-2006 |
Freight containers - Container equipMent data exchange (CEDEX) - General communication codes 集装箱 设备数据交换（CEDEX）一般通信代码 |
China National Standards M |
English PDF |
| GB/T 6501-2006 |
Test Method for measure length of the wool fibre - Comb sorter method 羊毛纤维长度试验方法 梳片法 |
China National Standards M |
English PDF |
| GB/T 6103-2006 |
Test Method for cotton defects in raw cotton - Hand 原棉疵点试验方法 手工法 |
China National Standards M |
English PDF |
| GB/T 6102.1-2006 |
Test Method for moisture regain in raw cotton by oven drying 原棉回潮率试验方法 烘箱法 |
China National Standards M |
English PDF |
| GB/T 6098.1-2006 |
Test Method for length of cotton fibres - Part 1: Roller analyser 棉纤维长度试验方法 第1部分：罗拉式分析仪法 |
China National Standards M |
English PDF |
| GB/T 14334-2006 |
SaMpling method for man-made staple fibres 化学纤维 短纤维取样方法 |
China National Standards M |
English PDF |
| GB/T 19979.2-2006 |
Geosynthetics - Penetration-resist property - Part 2: DeterMination of penetration coefficient 土工合成材料 防渗性能 第2部分 渗透系数的测定 |
China National Standards M |
English PDF |
| GB/T 20200-2006 |
SodiuM alpha-olefin sulfonate α-烯基磺酸钠 |
China National Standards M |
English PDF |
| GB/T 20199-2006 |
Surface active agents - Technical alkane sulfonates - DeterMination of alkane monosulfonates content by direct two-phase titration 表面活性剂-工业烷烃磺酸盐-烷烃单磺酸盐含量的测定（直接两相滴定法） |
China National Standards M |
English PDF |
| GB/T 20198-2006 |
Surface active agents - Detergents - Anionic-active Matter hydrolyzable under alkaline conditions - Determination of hydrolyzable and non-hydrolyzable anionic-active matter 表面活性剂和洗涤剂-在碱性条件下可水解的阴离子活性物-可水解和不可水解阴离子活性物的测定 |
China National Standards M |
English PDF |
| GB/T 20197-2006 |
Define, classify, Marking and degradability requirement of degradable plastic 降解塑料的定义、分类、标识和降解性能要求 |
China National Standards M |
English PDF |
| GB 14749-2006 |
Safety requireMents for baby walking frames 婴儿学步车安全要求 |
China National Standards M |
English PDF |
| GB 14748-2006 |
Safety requireMents for wheeled child conveyances 儿童推车安全要求 |
China National Standards M |
English PDF |
| GB 14747-2006 |
Safety requireMents for child tricycles 儿童三轮车安全要求 |
China National Standards M |
English PDF |
| GB 14746-2006 |
Safety requireMents for bicycles for young children 儿童自行车安全要求 |
China National Standards M |
English PDF |
| GB/T 20207.2-2006 |
Acrylonitrile-butadiene-styrene (ABS) pressure piping systeMs-Part 2: fittings 丙烯腈-丁二烯-苯乙烯（ABS）压力管道系统 第2部分：管件 |
China National Standards M |
English PDF |
| GB/T 20207.1-2006 |
Acrylonitrile-butadiene-styrene (ABS) pressure piping systeMs--Part 1: Pipes 丙烯腈-丁二烯-苯乙烯（ABS）压力管道系统 第1部分：管材 |
China National Standards M |
English PDF |
| GB/T 20202-2006 |
Ethylene-vinyl acetate copolyMer blown covering film for agriculture 农业用乙烯-乙酸乙烯酯共聚物（EVA）吹塑棚膜 |
China National Standards M |
English PDF |
| GB/T 20201-2006 |
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes 灌溉用聚乙烯(PE)压力管机械连接管件 |
China National Standards M |
English PDF |
| GB/T 15819-2006 |
Polyethylene (PE) pipes for irrigation laterals - Susceptibility to envionMental stress cracking induced by insert-type fittings - Test method and specification 灌溉用聚乙烯(PE)管材由插入式管件引起环境应力开裂敏感性的试验方法和技术要求 |
China National Standards M |
English PDF |
| GB 4455-2006 |
Polyethylene blown covering filM for agriculture 农业用聚乙烯吹塑棚膜 |
China National Standards M |
English PDF |
| GB/T 6910-2006 |
Methods for analysis of water for boiler and for cooling determination of calcium-complexometric titration 锅炉用水和冷却水分析方法 钙的测定 络合滴定法 |
China National Standards M |
English PDF |
| GB/T 6113.402-2006 |
Specification for radio disturbance and iMmunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty 无线电骚扰和抗扰度测量设备和测量方法规范 第4-2部分：不确定度、统计学和限值建模 测量设备和设施的不确定度 |
China National Standards M |
English PDF |
| GB/T 20155-2006 |
DeterMination of mercury, cadmium and lead in battery 电池中汞、镉、铅含量的测定 |
China National Standards M |
English PDF |
| GB/T 20152-2006 |
Standard Method of measuring the pinch temperature of quartz-tungsten-halogen lamps 石英卤钨灯压封部位温度的标准测量方法 |
China National Standards M |
English PDF |
| GB/T 20151-2006 |
PhotoMetry - the CIE system of physical photometry 光度学 CIE物理光度系统 |
China National Standards M |
English PDF |
| GB/T 20150-2006 |
ErytheMa reference action spectrum and standard erythema dose 红斑基准反应光谱及标准红斑剂量 |
China National Standards M |
English PDF |
| GB/T 20149-2006 |
Road traffic lights - PhotoMetric properties of 200mm roundel signals 道路交通信号灯 200mm圆形信号灯的光度特性 |
China National Standards M |
English PDF |
| GB/T 20147-2006 |
CIE standard coloriMetric observers CIE标准色度观测者 |
China National Standards M |
English PDF |
| GB/T 20146-2006 |
CIE standard illuMinants for colorimetry 色度学用CIE标准照明体 |
China National Standards M |
English PDF |
| GB/T 20145-2006 |
Photobiological safety of laMps and lamp systems 灯和灯系统的光生物安全性 |
China National Standards M |
English PDF |
| GB/T 20144-2006 |
Barrel thread for E14 and E27 laMpholders with shade holder ring 带灯罩环的E14和E27灯座用筒形螺纹 |
China National Standards M |
English PDF |
| GB/T 20143-2006 |
Procedure for use in the preparation of Maximum lamp outlines 灯最大外形尺寸图的制定程序 |
China National Standards M |
English PDF |
| GB/T 15152-2006 |
Methods of judging degradation for interference to mobile radiocommunication in the presence of impulsive noise 脉冲噪声干扰引起移动通信性能降级的评定方法 |
China National Standards M |
English PDF |
| GB/T 14285-2006 |
Technical code for relaying protection and security autoMatic equipment 继电保护和安全自动装置技术规程 |
China National Standards M |
English PDF |
| GB/T 12190-2006 |
Method for measuring the shielding effectiveness of electromagnetic shielding enclosures 电磁屏蔽室屏蔽效能的测量方法 |
China National Standards M |
English PDF |
| GB/T 12168-2006 |
Protective covers of insulating Material for live working 带电作业用遮蔽罩 |
China National Standards M |
English PDF |
| GB/T 12167-2006 |
AluMinium alloy grip clamps of tension wire for live working 带电作业用铝合金紧线卡线器 |
China National Standards M |
English PDF |
| GB/T 6994-2006 |
Electrical installation in ships - Definitions and general requireMents 船舶电气设备 定义和一般规定 |
China National Standards M |
English PDF |
| GB/T 4942.1-2006 |
Degrees of protection provided by the integral design of rotating electrical Machines (IP code) - Classification 旋转电机整体结构的防护等级（IP代码）-分级 |
China National Standards M |
English PDF |
| GB/T 20142-2006 |
CoMposite line post insulators for a.c. overhead lines with a norminal voltage greater than 1000V -- Definitions, Test methods and acceptance criteria 标称电压高于1000V的交流架空线路用线路柱式复合绝缘子-定义、试验方法及接收准则 |
China National Standards M |
English PDF |
| GB/T 20141-2006 |
Overhead electrical conductors - ForMed wire, concentric lay, stranded conductors 型线同心绞架空导线 |
China National Standards M |
English PDF |
| GB/T 20140-2006 |
DynaMic characteristic and vibration measurement method of turbo-generators on stator windings and evaluation criteria 透平型发电机定子绕组端部动态特性和振动试验方法及评定 |
China National Standards M |
English PDF |
| GB/T 20139-2006 |
Electrical insulation systeMs - Thermal evaluation of modifications to an established wire-wound EIS 电气绝缘结构-对已确定等级的散绕绕组绝缘结构进行组分调整的热评定方法 |
China National Standards M |
English PDF |
| GB/T 20138-2006 |
Degrees of protection provided by enclosures for electrical equipMent against external mechanical impacts (IK code) 电器设备外壳对外界机械碰撞的防护等级（IK代码） |
China National Standards M |
English PDF |
| GB/T 20137-2006 |
Method for determining losses and efficiency of three-phase cage induction motors 三相笼型异步电动机损耗和效率的确定方法 |
China National Standards M |
English PDF |
| GB/T 20136-2006 |
Electric power plant with inernal coMbustion engines, general method of test for 内燃机电站通用试验方法 |
China National Standards M |
English PDF |
| GB/T 15468-2006 |
FundaMental technical requirements for hydraulic turbines 水轮机基本技术条件 |
China National Standards M |
English PDF |
| GB/T 12786-2006 |
AutoMatic electric power plant with internal combustion engines for general specification 自动化内燃机电站通用技术条件 |
China National Standards M |
English PDF |
| GB/T 15208.2-2006 |
Micro-dose X-ray security inspection system - Part 2: Test block 微剂量X射线安全检查设备 第2部分：测试体 |
China National Standards M |
English PDF |
| GB/T 5687.11-2006 |
FerrochroMium-Determination of titanium content-Diantipyrylmethane spectrophotometric method 铬铁 钛含量的测定 二安替比林甲烷分光光度法 |
China National Standards M |
English PDF |
| GB/T 5687.10-2006 |
FerrochroMium-Determination of manganese content-Flame atomic absorption spectrometric method 铬铁 锰含量的测定 火焰原子吸收光谱法 |
China National Standards M |
English PDF |
| GB/T 4157-2006 |
Laboratory testing of Metals for resistance to specific forms of environmental cracking in H2S environments 金属在硫化氢环境中抗特殊形式环境开裂实验室试验 |
China National Standards M |
English PDF |
| GB/T 20127.9-2006 |
Steel and alloy - DeterMination of trace element contents Part 9: Determination of scandium content by inductively coupled plasma atomic emission spectrometric method 钢铁及合金 痕量元素的测定 第9部分：电感耦合等离子体发射光谱法测定钪含量 |
China National Standards M |
English PDF |
| GB/T 20127.8-2006 |
Steel and alloy - DeterMination of trace element contents Part 8: Determination of antimony content by hydride generation-atomic fluorescence spectrometric method 钢铁及合金 痕量元素的测定 第8部分：氢化物发生-原子荧光光谱法测定锑含量 |
China National Standards M |
English PDF |
| GB/T 20127.7-2006 |
Steel and alloy - DeterMination of trace element contents Part 7: Determination of lead content by oscillopolarographic method 钢铁及合金 痕量元素的测定 第7部分：示波极谱法测定铅含量 |
China National Standards M |
English PDF |
| GB/T 20127.6-2006 |
Steel and alloy - DeterMination of trace element contents Part 6: Determination of germanium content by gallic acid oscillopolarographic method 钢铁及合金 痕量元素的测定 第6部分：没食子酸-示波极谱法测定锗含量 |
China National Standards M |
English PDF |
| GB/T 20127.5-2006 |
Steel and alloy - DeterMination of trace element contents Part 5: Determination of gallium content by extraction separation-rhodamine B photometric method 钢铁及合金 痕量元素的测定 第5部分：萃取分离-罗丹明B光度法 测定镓含量 |
China National Standards M |
English PDF |
| GB/T 20127.4-2006 |
Steel and alloy - DeterMination of trace element contents Part 4: Determination of copper content by graphite furnace atomic absorption spectrometric method 钢铁及合金 痕量元素的测定 第4部分：石墨炉原子吸收光谱法测定铜含量 |
China National Standards M |
English PDF |
| GB/T 20127.3-2006 |
Steel and alloy - DeterMination of trace element contents Part3:Determination of calcium,magnesium,barium content by inductively coupled plasma atomic emission spectrometric method 钢铁及合金 痕量元素的测定 第3部分：电感耦合等离子体发射光谱法测定钙、镁和钡含量 |
China National Standards M |
English PDF |
| GB/T 20127.2-2006 |
Steel and alloy - DeterMination of trace element contents Part2: Determination of arsenic content by hydride generation-atomic fluorescence spectrometric method 钢铁及合金 痕量元素的测定 第2部分：氢化物发生-原子荧光光谱法 测定砷含量 |
China National Standards M |
English PDF |
| GB/T 20127.13-2006 |
Steel and alloy - DeterMination of trace element contents Part 13: Determination of tin content by iodide extraction-phenylfluorone photometric method 钢铁及合金 痕量元素的测定 第13部分：碘化物萃取-苯基荧光酮光度法测定锡含量 |
China National Standards M |
English PDF |
| GB/T 20127.12-2006 |
Steel and alloy - DeterMination of trace element contents Part 12: Determination of zinc content by flame atomic absorption spectrometric method 钢铁及合金 痕量元素的测定 第12部分：火焰原子吸收光谱法测定锌含量 |
China National Standards M |
English PDF |
| GB/T 20127.1-2006 |
Steel and alloy - DeterMination of trace element contents Part 1: Determination of silver content by graphite furnace atomic absorption spectrometric method 钢铁及合金 痕量元素的测定 第1部分：石墨炉原子吸收光谱法测定银含量 |
China National Standards M |
English PDF |
| GB/T 20127.11-2006 |
Steel and alloy - DeterMination of trace element contents Part 11: Determination of indium and thallium content by inductively coupled plasma-mass spectrometric method 钢铁及合金 痕量元素的测定 第11部分：电感耦合等离子体质谱法测定铟和铊含量 |
China National Standards M |
English PDF |
| GB/T 20127.10-2006 |
Steel and alloy - DeterMination of trace element contents Part 10: Determination of selenium content by hydride generation-atomic fluorescence spectrometric method 钢铁及合金 痕量元素的测定 第10部分：氢化物发生-原子荧光光谱法测定硒含量 |
China National Standards M |
English PDF |
| GB/T 20126-2006 |
Unalloyed steel -- DeterMination of low carbon content -- Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) 非合金钢 低碳含量的测定 第2部分：感应炉（经预加热）内燃烧后红外吸收法 |
China National Standards M |
English PDF |
| GB/T 20125-2006 |
Low-alloy steel - DeterMination of multi-element contents - Inductively coupled plasma atomic emission spectrometric method 低合金钢 多元素的测定 电感耦合等离子体发射光谱法 |
China National Standards M |
English PDF |
| GB/T 20124-2006 |
Steel and iron -- DeterMination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method) 钢铁 氮含量的测定 惰性气体熔融热导法（常规方法） |
China National Standards M |
English PDF |
| GB/T 20123-2006 |
Steel and iron -- DeterMination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method) 钢铁 总碳硫含量的测定 高频感应炉燃烧后红外吸收法（常规方法） |
China National Standards M |
English PDF |
| GB/T 20122-2006 |
Corrosion of Metals and alloys -- Evaluation of stress corrosion cracking by the drop evaporation test 金属和合金的腐蚀 滴落蒸发试验的应力腐蚀开裂评价 |
China National Standards M |
English PDF |
| GB/T 20121-2006 |
Corrosion of Metals and alloys -- Corrosion tests in artificial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) 金属和合金的腐蚀 人造气氛的腐蚀试验 间歇盐雾下的室外加速试验（疮痂试验） |
China National Standards M |
English PDF |
| GB/T 20120.2-2006 |
Corrosion of Metals and alloys -- Corrosion fatigue testing -- Part 2: Crack propagation testing using precracked specimens 金属和合金的腐蚀 腐蚀疲劳试验 第2部分：预裂纹试验裂纹扩展试验 |
China National Standards M |
English PDF |
| GB/T 20120.1-2006 |
Corrosion of Metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing 金属和合金的腐蚀 腐蚀疲劳试验 第1部分：循环失效试验 |
China National Standards M |
English PDF |
| GB/T 1510-2006 |
Manganese ores-Determination of aluminium content-EDTA titrimetric method 锰矿石 铝含量的测定 EDTA滴定法 |
China National Standards M |
English PDF |
| GB/T 11261-2006 |
Steel and iron DeterMination of oxygen content The pulse heating inert gas fusion-infra-red absorption method 钢铁 氧含量的测定 脉冲加热惰气熔融-红外线吸收法 |
China National Standards M |
English PDF |
| GB/T 20130-2006 |
Self-shielding electron beaM sterilizing facility 自屏蔽电子束消毒灭菌装置 |
China National Standards M |
English PDF |
| GB/T 13632.2-2006 |
Measurements for monitoring adequate cooling within the core of pressurized light water reactors Part 2: Instrumentation requirements during cold shutdown 监督压水堆堆芯充分冷却的测量要求 第2部分：冷停堆期间监测仪表的要求 |
China National Standards M |
English PDF |
| GB/T 10263-2006 |
EnvironMental conditions and test procedures for nuclear radiation detectors 核辐射探测器环境条件与试验方法 |
China National Standards M |
English PDF |
| GB 50370-2005 |
Code for design of gas fire extinguishing systeMs 气体灭火系统设计规范 |
China National Standards M |
English PDF |
| GB 16670-2006 |
Cabinet gas fire extinguishing equipMent 柜式气体灭火装置 |
China National Standards M |
English PDF |
| GB 8918-2006 |
Steel wire ropes for iMportant purposes 重要用途钢丝绳 |
China National Standards M |
English PDF |
| GB/T 22000-2006 |
Food safety Management systems - Requirements for any organization in the food chain 食品安全管理体系 食品链中各类组织的要求 |
China National Standards M |
English PDF |
| GB 20266-2006 |
Rubber industrial boots with cheMical resistance 耐化学品的工业用橡胶靴 |
China National Standards M |
English PDF |
| GB 20265-2006 |
Moulded plastics industrial boots with chemical resistance 耐化学品的工业用模压塑料靴 |
China National Standards M |
English PDF |
| GB/T 9841-2006 |
Feed additive VitaMin B12 powder (cyanocobalamin cobione) 饲料添加剂 维生素B12(氰钴胺)粉剂 |
China National Standards M |
English PDF |
| Find out:46298Items | To Page of: First -Previous-Next -Last | [380] [381] [382] [383] [384] [385] [386] |
+86-755-25831330
