Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 17879-2023 |
gears - chemical etching test for surface tempering after grinding 齿轮 磨削后表面回火的化学浸蚀检验 |
China National Standards gears |
 English PDF |
| GB/T 10095.1-2022 |
Cylindrical gears - ISO tooth surface tolerance classification system - Part 1: Definition and permissible values of tooth surface deviations 圆柱齿轮 ISO齿面公差分级制 第1部分：齿面偏差的定义和允许值 |
China National Standards gears |
English PDF |
| GB/T 3480.5-2021 |
Calculation of load capacity of spur and helical gears—Part 5:Strength and quality of materials 直齿轮和斜齿轮承载能力计算 第5部分：材料的强度和质量 |
China National Standards gears |
English PDF |
| GB/T 3480.3-2021 |
Calculation of load capacity of spur and helical gears—Part 3: Calculation of tooth bending strength 直齿轮和斜齿轮承载能力计算 第3部分：轮齿弯曲强度计算 |
China National Standards gears |
English PDF |
| GB/T 3480.2-2021 |
Calculation of load capacity of spur and helical gears—Part 2: Calculation of surface durability (pitting) 直齿轮和斜齿轮承载能力计算 第2部分：齿面接触强度（点蚀）计算 |
China National Standards gears |
English PDF |
| GB/T 38805-2020 |
Technical requirements of heat treatment for heavy duty gears 重载齿轮热处理技术要求 |
China National Standards gears |
English PDF |
| GB/T 39430-2020 |
Specifications for the blanks of high reliability gears 高可靠性齿轮毛坯技术要求 |
China National Standards gears |
English PDF |
| GB/T 39332-2020 |
General requirements for the anti-fatigue manufacturing of precision gears 高精度齿轮抗疲劳制造通用技术要求 |
China National Standards gears |
English PDF |
| GB/T 3480.1-2019 |
Calculation of load capacity of spur and helical gears—Part 1: Basic principles, introduction and general influence factors 直齿轮和斜齿轮承载能力计算 第1部分：基本原理、概述及通用影响系数 |
China National Standards gears |
English PDF |
| GB/T 3480.6-2018 |
Calculation of load capacity of spur and helical gears—Part 6:Calculation of service life under variable load 直齿轮和斜齿轮承载能力计算-第6部分：变载荷条件下的使用寿命计算 |
China National Standards gears |
English PDF |
| GB/T 37161-2018 |
gears—Evaluation of instruments for measurement of individual gears 齿轮-齿轮测量仪的评价 |
China National Standards gears |
English PDF |
| GB/T 10085-2018 |
Basic paramaters of cylindrical worm gears 圆柱蜗杆传动基本参数 |
China National Standards gears |
English PDF |
| GB/T 32256-2015 |
Steel forgings for rings for reduction gears—General specification 钢质减速齿环锻件 通用技术条件 |
China National Standards gears |
English PDF |
| GB/T 30104.210-2013 |
Digital addressable lighting interface―Part 210: Particular requirements for control gears―Sequencer (Device Type 9) 数字可寻址照明接口 第210部分：控制装置的特殊要求 程序装置（设备类型9） |
China National Standards gears |
English PDF |
| GB/T 29127-2012 |
Measures for periodic servicing and maintenance of lifeboats and release gears 救生艇及吊钩释放系统定期检验维护方法 |
China National Standards gears |
English PDF |
| GB/T 26777-2011 |
Semitrailer landing gears 挂车支撑装置 |
China National Standards gears |
English PDF |
| GB/T 25509-2010 |
Mechanical systems and components for general use - Reference dictionary for gears 机械系统和通用件 齿轮参考字典 |
China National Standards gears |
English PDF |
| GB/T 22775-2008 |
gears for timekeeping instruments - Contrate gears 计时仪器用齿轮 端面齿轮 |
China National Standards gears |
English PDF |
| GB/Z 22559.2-2008 |
gears - Thermal capacity - Part 2: Thermal load-carrying capacity 齿轮 热功率 第2部分：热承载能力计算 |
China National Standards gears |
English PDF |
| GB/T 3480.5-2008 |
Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials 直齿轮和斜齿轮承载能力计算 第5部分：材料的强度和质量 |
China National Standards gears |
English PDF |
| GB/T 1357-2008 |
Cylindrical gears for general engineering and for heavy engineering - Modules 通用机械和重型机械用圆柱齿轮 模数 |
China National Standards gears |
English PDF |
| GB/T 13924-2008 |
Inspection code for accuracy of involute cylindrical gears 渐开线圆柱齿轮精度 检验细则 |
China National Standards gears |
English PDF |
| GB/Z 18620.4-2008 |
Cylindrical gears - Code of inspection practice - Part 4: Reommendations relative to surface texture and tooth contact pattern checking 圆柱齿轮 检验实施规范 第4部分：表面结构和轮齿接触斑点的检验 |
China National Standards gears |
English PDF |
| GB/Z 18620.3-2008 |
Cylindrical gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes 圆柱齿轮 检验实施规范 第3部分: 齿轮坯、轴中心距和轴线平行度的检验 |
China National Standards gears |
English PDF |
| GB/Z 18620.2-2008 |
Cylindrical gears - Code of inspection practice - Part 2: Inspetion related to radial composite deviations,runout, tooth thickness and backlash 圆柱齿轮 检验实施规范 第2部分: 径向综合偏差、径向跳动、齿厚和侧隙的检验 |
China National Standards gears |
English PDF |
| GB/Z 18620.1-2008 |
Cylindrical gears - Code of inspection practice-Part 1: Inspection of corresponding flanks of gear teeth 圆柱齿轮 检验实施规范 第1部分: 轮齿同侧齿面的检验 |
China National Standards gears |
English PDF |
| GB/T 10095.2-2008 |
Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information 圆柱齿轮 精度制 第2部分：径向综合偏差与径向跳动的定义和允许值 |
China National Standards gears |
English PDF |
| GB/T 10095.1-2008 |
Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth 圆柱齿轮 精度制 第1部分：轮齿同侧齿面偏差的定义和允许值 |
China National Standards gears |
English PDF |
| GB/T 6960.4-2007 |
Tractor terminology - Part 4: Running gears and undercarriages 拖拉机术语 第4部分：行走系 |
China National Standards gears |
English PDF |
| GB/T 20716.2-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and running gears of vehicles with 12V nominal supply voltage 道路车辆 牵引车和挂车之间的电连接器 第2部分：12V标称电压车辆的制动系统和行走系的连接 |
China National Standards gears |
English PDF |
| GB/T 20716.1-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running gears of vehicles with 24V nominal supply voltage 道路车辆 牵引车和挂车之间的电连接器 第1部分：24V标称电压车辆的制动系统和行走系的连接 |
China National Standards gears |
English PDF |
| GB/T 19936.1-2005 |
gears-FZG test procedures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils 齿轮 FZG 试验程序 第1部分：油品的相对胶合承载能力 FZG 试验方法 A/8.3/90 |
China National Standards gears |
English PDF |
| GB/T 19935-2005 |
Worm gears-Geometry of worms-Name plates for worm gear units,centre distances,information to be supplied to gear manufacturer by the purchaser 蜗杆传动 蜗杆的几何参数-蜗杆装置的铭牌、中心距、用户提供给制造者的参数 |
China National Standards gears |
English PDF |
| GB/Z 6413.2-2003 |
Calculation of scuffing load capacity of cylindrical，bevel and hypoid gears--Part 2:Integral temperature method 圆柱齿轮、锥齿轮和准双曲面齿轮 胶合承载能力计算方法 第2部分:积分温度法 |
China National Standards gears |
English PDF |
| GB/Z 6413.1-2003 |
Calculation of scuffing load capacity of cylindrical，bevel and hypoid gears--Part 1:Flash temperature method 圆柱齿轮、锥齿轮和准双曲面齿轮 胶合承载能力计算方法 第1部分:闪温法 |
China National Standards gears |
English PDF |
| GB/T 19406-2003 |
Calculation methods of load capacity for involute cylindrical spur and helical gears--Application for industrical gears 渐开线直齿和斜齿圆柱齿轮承载能力计算方法 工业齿轮应用 |
China National Standards gears |
English PDF |
| GB/T 4459.2-2003 |
Mechanical drawings--Conventional representation of gears 机械制图 齿轮表示法 |
China National Standards gears |
English PDF |
| GB/T 1356-2001 |
Cylindrical gears for general and heavy engineering--Standard basic rack tooth profile 通用机械和重型机械用圆柱齿轮 标准基本齿条齿廓 |
China National Standards gears |
English PDF |
| GB/T 17879-1999 |
gears--Surface temper etch inspection after grinding 齿轮 磨削后表面回火的浸蚀检验 |
China National Standards gears |
English PDF |
| GB/T 3480-1997 |
Calculation methods of load capacity for involute cylindrical gears 渐开线圆柱齿轮承载能力计算方法 |
China National Standards gears |
English PDF |
| GB/T 7631.7-1995 |
Lubricants and related products (class L)--Classification--Part 7:Family C (gears) 润滑剂和有关产品(L类)的分类 第7部分:C组(齿轮) |
China National Standards gears |
English PDF |
| GB/T 14230-1993 |
Standard of test method for bending load capacity of gears 齿轮弯曲疲劳强度试验方法 |
China National Standards gears |
English PDF |
| GB/T 14229-1993 |
Standard of test method for surface load capacity of gears 齿轮接触疲劳强度试验方法 |
China National Standards gears |
English PDF |
| GB/T 3374-1992 |
Basic terminology of gears 齿轮基本术语 |
China National Standards gears |
English PDF |
| GB/T 13672-1992 |
Standard test method for scuffing load capacity of gears 齿轮胶合承载能力试验方法 |
China National Standards gears |
English PDF |
| GB/T 12759-1991 |
Double-circular-arc tooth profile of basic rack for cylindrical gears 双圆弧圆柱齿轮基本齿廓 |
China National Standards gears |
English PDF |
| GB/T 2363-1990 |
Accuracy of fine-pitch involute cylindrical gears 小模数渐开线圆柱齿轮精度 |
China National Standards gears |
English PDF |
| GB/T 2362-1990 |
Basic rack tooth profile of fine-pitch involute cylindrical gears 小模数渐开线圆柱齿轮基本齿廓 |
China National Standards gears |
English PDF |
| GB/T 12371-1990 |
Bevel gears--Information of the dimensional data to be given on the drawing 锥齿轮 图样上应注明的尺寸数据 |
China National Standards gears |
English PDF |
| GB/T 12370-1990 |
Terminology for bevel and hypoid gears 锥齿轮和准双曲面齿轮 术语 |
China National Standards gears |
English PDF |
| GB/T 12369-1990 |
Basic tooth profile of straight and skew bevel gears 直齿及斜齿锥齿轮基本齿廓 |
China National Standards gears |
English PDF |
| GB/T 12368-1990 |
Modules of bevel gears 锥齿轮模数 |
China National Standards gears |
English PDF |
| GB/T 11365-1989 |
Accuracy of bevel and hypoid gears 锥齿轮和准双曲面齿轮 精度 |
China National Standards gears |
English PDF |
| GB/T 10225-1988 |
Accuracy of fine-pitch bevel gears 小模数锥齿轮精度 |
China National Standards gears |
English PDF |
| GB/T 10224-1988 |
Basic rack tooth profile of fine-pitch bevel gears 小模数锥齿轮基本齿廓 |
China National Standards gears |
English PDF |
| GB/T 10085-1988 |
Basic parameters of cylindrical worm gears 圆柱蜗杆传动基本参数 |
China National Standards gears |
English PDF |
| GB/T 10063-1988 |
Simplified methods for the calculation of load capacity of involute cylindrical gears for general machines 通用机械渐开线圆柱齿轮 承载能力简化计算方法 |
China National Standards gears |
English PDF |
| GB/T 6443-1986 |
Involute cylindrical gears--Information of the dimensional data to be given on the drawing 渐开线圆柱齿轮图样上应注明的尺寸数据 |
China National Standards gears |
English PDF |
| Find out:58Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
