China National Standards

China CC GB Standards English PDF List


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "CC" GB Standards English PDF List:
    • Standard  Code Standard Title Standard Class Order
    GB/T 10095.2-2008 Cylindrical gears - System of aCCuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
    圆柱齿轮 精度制 第2部分：径向综合偏差与径向跳动的定义和允许值    		 China National Standards
    CC
    English PDF
    GB/T 10095.1-2008 Cylindrical gears - System of aCCuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
    圆柱齿轮 精度制 第1部分：轮齿同侧齿面偏差的定义和允许值    		 China National Standards
    CC
    English PDF
    GB/T 464-2008 Paper and board - ACCelerated aging - Dry heat treatment
    纸和纸板的干热加速老化    		 China National Standards
    CC
    English PDF
    GB/T 2423.15-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Test Ga and guidance: ACCeleration, steady
    电工电子产品环境试验 第2部分: 试验方法 试验Ga和导则: 稳态加速度    		 China National Standards
    CC
    English PDF
    GB/T 21457-2008 Cranes and related equipment - ACCuracy requirements for measuring parameters during testing
    起重机和相关设备 试验中参数的测量精度要求    		 China National Standards
    CC
    English PDF
    GB/T 7386-2008 Co-ordination of dimension in ships’ aCCommodation
    船舶起居舱室的尺度协调    		 China National Standards
    CC
    English PDF
    GB/T 10831-2008 Marine electric eCCentric screw pump
    船用电动单螺杆泵    		 China National Standards
    CC
    English PDF
    GB/T 21405-2008 Reciprocating intenal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in aCCordance with ISO 8178
    往复式内燃机 发动机功率的确定和测量方法 排气污染物排放试验的附加要求    		 China National Standards
    CC
    English PDF
    GB/T 21398-2008 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and aCCeptance criteria
    农林机械 电磁兼容性 试验方法和验收规则    		 China National Standards
    CC
    English PDF
    GB/T 2900.70-2008 Electrotechnical terminology - Electrical aCCessories
    电工术语 电器附件    		 China National Standards
    CC
    English PDF
    GB/T 21430.1-2008 Multicore and symmetrical pair/quad cables for broadband digital communications(high bit rate digital aCCess telecommunication networks) Outside plant cables - Part 1: Generic specification
    宽带数字通信（高速率数字接入通信网络）用对绞或星绞多芯对称电缆-户外电缆　第1部分：总规范    		 China National Standards
    CC
    English PDF
    GB/T 21429-2008 Composite insulators - Hollow insulators for use in outdoor and indoor electrical equipment - Definitions, test methods, aCCeptance criteria and design recommendations
    户外和户内电气设备用空心复合绝缘子 定义、试验方法、接收准则和设计推荐    		 China National Standards
    CC
    English PDF
    GB/T 21184-2007 Rubber compounding ingredienets - Sulfenamide aCCelerators - Test methods
    橡胶配合剂 次磺酰胺促进剂 试验方法    		 China National Standards
    CC
    English PDF
    GB/T 20779.2-2007 Rubber for electric power safety - Part 2：Rubber for cable aCCessories
    电力防护用橡胶材料 第2部分：电缆附件用橡胶材料    		 China National Standards
    CC
    English PDF
    GB 21146-2007 Personal protective equipment - OCCupational footwear
    个体防护装备 职业鞋    		 China National Standards
    CC
    English PDF
    GB/T 21153-2007 Earth-moving machinery - Units for dimensions, performance and capacities, and their measurement aCCuracies
    土方机械 尺寸、性能和参数的单位与测量准确度    		 China National Standards
    CC
    English PDF
    GB 50166-2007 Code for installation and aCCeptance of fire alarm system
    火灾自动报警系统施工及验收规范    		 China National Standards
    CC
    English PDF
    GB/T 21121-2007 Animal and vegetable fats and oils - Determination of oxidation stability (ACCelerated oxidation test)
    动植物油脂 氧化稳定性的测定（加速氧化测试）    		 China National Standards
    CC
    English PDF
    GB/T 21138-2007 TobaCCo Seeds
    烟草种子    		 China National Standards
    CC
    English PDF
    GB/T 21137-2007 Leaf tobaCCo - determination of strip particle size
    烟叶 片烟大小的测定    		 China National Standards
    CC
    English PDF
    GB/T 21136-2007 Threshed tobaCCo Determination of stem content
    打叶烟叶 叶中含梗率的测定    		 China National Standards
    CC
    English PDF
    GB/T 21135-2007 TobaCCo and tobacco products - Determination of vapour - phase nicotine in air - Gas - chromatographic method
    烟草及烟草制品 空气中气相烟碱的测定 气相色谱法    		 China National Standards
    CC
    English PDF
    GB/T 21134-2007 TobaCCo and tobacco products - Determination of silicated residues insoluble in hydrochloric acid
    烟草及烟草制品 不溶于盐酸的硅酸盐残留物的测定    		 China National Standards
    CC
    English PDF
    GB/T 21133-2007 Environmental tobaCCo smoke Estimation of its contribution to respirable suspended particles Method based on solanesol
    环境烟草烟气 可吸入悬浮颗粒物的估测 茄呢醇法    		 China National Standards
    CC
    English PDF
    GB/T 21132-2007 TobaCCo and tobacco products - Determination of dithiocarbamate pesticides residues - Molecular absorption spectrometric method
    烟草及烟草制品 二硫代氨基甲酸酯农药残留量的测定 分子吸收光度法    		 China National Standards
    CC
    English PDF
    GB/T 21131-2007 Environmental tobaCCo smoke Estimation of its contribution to respirable suspended particles Determination of particulate matter by ultraviolet absorbance and by fluorescence
    环境烟草烟气 可吸入悬浮颗粒物的估测 用紫外吸收法和荧光法测定粒相物    		 China National Standards
    CC
    English PDF
    GB/T 3452.2-2007 Fluid power systems-O-rings - Part 2: Quality aCCeptance criteria
    液压气动用O 形橡胶密封圈 第2部分：外观质量检验规范    		 China National Standards
    CC
    English PDF
    GB/T 21000.2-2007 Commercial refrigerated cabinets - Test methods - Part 2: Test for aCCidental mechanical contact
    商用冷藏柜 试验方法 第2部分: 偶然机械性接触试验    		 China National Standards
    CC
    English PDF
    GB/T 6476-2007 Surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the aCCuracy
    立轴矩台平面磨床 精度检验    		 China National Standards
    CC
    English PDF
    GB/T 5288-2007 Slideways grinding machines with two columns - Testing of the aCCuracy
    龙门导轨磨床 精度检验    		 China National Standards
    CC
    English PDF
    GB/T 4685-2007 External cylindrical grinding machines - Testing of the aCCuracy
    外圆磨床 精度检验    		 China National Standards
    CC
    English PDF
    GB/T 4682-2007 Internal cylindrical grinding machines with horizontal spindle - Testing of the aCCuracy
    内圆磨床 精度检验    		 China National Standards
    CC
    English PDF
    GB/T 4681-2007 External cylindrical centreless grinding machines - Testing of the aCCuracy
    无心外圆磨床 精度检验    		 China National Standards
    CC
    English PDF
    GB/T 4022.1-2007 Surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the aCCuracy - Part 1：Machines with a table surface length of up to 1600 mm
    卧轴矩台平面磨床 精度检验 第1部分：工作台面长度至1600mm的机床    		 China National Standards
    CC
    English PDF
    GB/T 20957.4-2007 Test conditions for precision machining centres - Part 4：ACCuracy and repeatability of positioning of linear and rotary axes
    精密加工中心检验条件 第4部分：线性和回转轴线的定位精度和重复定位精度检验    		 China National Standards
    CC
    English PDF
    GB/T 16462.4-2007 Test conditions for numerically controlled turning machines and turning centres - Part 4: ACCuracy and repeatability of positioning of linear and rotary axes
    数控车床和车削中心检验条件 第4部分：线性和回转轴线的定位精度及重复定位精度检验    		 China National Standards
    CC
    English PDF
    GB/T 20982.3-2007 Textile machinery and aCCessories - Weaving machines - Part 3: Parts of the machine - Vocabulary
    纺织机械与附件 织机 第3部分：织机零部件 词汇    		 China National Standards
    CC
    English PDF
    GB/T 20982.2-2007 Textile machinery and aCCessories - Weaving machines - Part 2: Accessories - Vocabulary
    纺织机械与附件 织机 第2部分：附件 词汇    		 China National Standards
    CC
    English PDF
    GB/T 15160-2007 Land mobile communication system requirements using multi-channel aCCess techniques without a central controller
    无中心多信道选址移动通信系统体制    		 China National Standards
    CC
    English PDF
    GB/T 20969.3-2007 Special environmental condition - Machinery for plateau - Part 3: The specification of select type and aCCeptance check for construction machinery on plateau
    特殊环境条件 高原机械 第3部分：高原型工程机械选型、验收规范    		 China National Standards
    CC
    English PDF
    GB/T 20958.2-2007 Test conditions for CNC bed-type milling machines - Testing of the aCCuracy - Part 2: Milling machines with vertical spindle
    数控床身铣床检验条件 精度检验 第2部分: 立式铣床    		 China National Standards
    CC
    English PDF
    GB/T 20958.1-2007 Test conditions for CNC bed-type milling machines - Testing of the aCCuracy - Part 1: Milling machines with horizontal spindle
    数控床身铣床检验条件 精度检验 第1部分: 卧式铣床    		 China National Standards
    CC
    English PDF
    GB/T 20957.7-2007 Test conditions for precision machining centres - Part 7: ACCuracy of a finished test piece
    精密加工中心检验条件 第7部分：精加工试件精度检验    		 China National Standards
    CC
    English PDF
    GB/T 20957.5-2007 Test conditions of precision machining centres - Part 5: Tests for aCCuracy and repeatability of positioning of work-holding pallets
    精密加工中心检验条件 第5部分：工件夹持托板的定位精度和重复定位精度检验    		 China National Standards
    CC
    English PDF
    GB/T 20957.1-2007 Test conditions for precision machining centres - Part 1: Geometric tests for machines with horizontal spindle and with aCCessory heads (horizontal Z axis)
    精密加工中心检验条件 第1部分：卧式和带附加主轴头机床几何精度检验(水平Z轴)    		 China National Standards
    CC
    English PDF
    GB/T 20946-2007 short link chain for lifting purposes - General conditions of aCCeptance
    起重用短环链 验收总则    		 China National Standards
    CC
    English PDF
    GB/T 20982.1-2007 Textile machinery and aCCessories - Weaving machines - Part 1: Vocabulary and classification
    纺织机械与附件 织机 第1部分：词汇和分类    		 China National Standards
    CC
    English PDF
    GB/T 21031-2007 ACCeptance code of practice for water-saving irrigation equipment on the site
    节水灌溉设备现场验收规程    		 China National Standards
    CC
    English PDF
    GB/T 20939-2007 Structuring principles for technical products and technical product documentation - Letter codes - Main classes and subclasses of objects aCCording to their purpose and task
    技术产品及技术产品文件结构原则 字母代码 按项目用途和任务划分的主类和子类    		 China National Standards
    CC
    English PDF
    GB/T 20913-2007 The protection of the oCCupants in the event of an off-set frontal collision for passenger car
    乘用车正面偏置碰撞的乘员保护    		 China National Standards
    CC
    English PDF
    GB/T 9785-2007 Chains,sprockets and aCCessories - List of equivalent terms
    链条链轮术语    		 China National Standards
    CC
    English PDF
    GB 50397-2007 Code for aCCeptance of electrical construction installation in metallurgy
    冶金电气设备工程安装验收规范    		 China National Standards
    CC
    English PDF
    GB/T 20915.2-2007 Stamping dies - Elastomer pressure springs - Part 2: Specification of aCCessories
    冲模 弹性体压缩弹簧 第2部分：附件规格    		 China National Standards
    CC
    English PDF
    GB/T 20914.2-2007 Stamping dies - Gas springs - Part 2: Specification of aCCessories
    冲模 氮气弹簧 第2部分：附件规格    		 China National Standards
    CC
    English PDF
    GB 50396-2007 Code of design for aCCess control systems engineering
    出入口控制系统工程设计规范    		 China National Standards
    CC
    English PDF
    GB/T 20854-2007 Corrosion of metals and alloys - aCCelerated testing involving cyclic exposure to salt mist, “dry“ and “wet“ condition
    金属和合金的腐蚀 循环暴露在盐雾、“干”和“湿”条件下的加速试验    		 China National Standards
    CC
    English PDF
    GB/T 20853-2007 Corrosion of metals and alloys - corrosion in artificial atmosphere - aCCelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
    金属和合金的腐蚀 人造大气中的腐蚀 暴露于间歇喷洒盐溶液和潮湿循环受控条件下的加速腐蚀试验    		 China National Standards
    CC
    English PDF
    GB 50401-2007 Code for installation and aCCeptance of fire communication and command system
    消防通信指挥系统施工及验收规范    		 China National Standards
    CC
    English PDF
    GB/T 20881-2007 IsomaltooligosaCCharide
    低聚异麦芽糖    		 China National Standards
    CC
    English PDF
    GB 50402-2007 Code for installation aCCeptance of sintering mechanical equipment engineering
    烧结机械设备工程安装验收规范    		 China National Standards
    CC
    English PDF
    GB 50263-2007 Code for installation and aCCeptance of gas fire extinguishing systems
    气体灭火系统施工及验收规范    		 China National Standards
    CC
    English PDF
    GB 50411-2007 Code for aCCeptance of energy efficient building construction
    建筑节能工程施工质量验收规范    		 China National Standards
    CC
    English PDF
    GB/T 8829-2006 Vulcanizing aCCelerator NOBS
    硫化促进剂NOBS    		 China National Standards
    CC
    English PDF
    GB/T 20809-2006 The evaluating specification on the HACCP certification of the meat products
    肉制品生产 HACCP 应用规范    		 China National Standards
    CC
    English PDF
    GB/T 27068-2006 Arrangements for the recogonition and aCCeptance of conformity assessment results
    合格评定结果的承认和接受协议    		 China National Standards
    CC
    English PDF
    GB/T 20663-2006 Bladder type aCCumulators
    囊式蓄能用压力容器    		 China National Standards
    CC
    English PDF
    GB 50374-2006 Code of construction and aCCeptance for communication conduit engineering
    通信管道工程施工及验收规范    		 China National Standards
    CC
    English PDF
    GB/T 6379.5-2006 ACCuracy(trueness and precision) of measurement methods and results -Part 5: Alternative methods for the determination of the precision of a standard measurement method
    测量方法与结果的准确度（正确度与精密度） 第5部分：确定标准测量方法精密度的可替代方法    		 China National Standards
    CC
    English PDF
    GB/T 6379.4-2006 ACCuracy (trueness and precision) of measurement methods and results -Part 4: Basic methods for the determination of the trueness of a standard measurement method
    测量方法与结果的准确度（正确度与精密度） 第4部分：确定标准测量方法正确度的基本方法    		 China National Standards
    CC
    English PDF
    GB/T 20640-2006 Electrical aCCessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
    电气附件 家用断路器和类似设备 辅助触头组件    		 China National Standards
    CC
    English PDF
    GB/T 19042.5-2006 Evaluation and routine testing in medical imaging departments - Part 3-5: ACCeptance tests-Imaging performances of computed tomography X-ray equipment
    医用成像部门的评价及例行试验 第3-5部分：X射线计算机体层摄影设备成像性能验收试验    		 China National Standards
    CC
    English PDF
    GB/T 20551-2006 The evaluating specification on the HACCP certification in the slaughter of livestock and poultry
    畜禽屠宰HACCP应用规范    		 China National Standards
    CC
    English PDF
    GB/T 20572-2006 The evaluating specification on the HACCP certification of the natural casings processing
    天然肠衣生产HACCP应用规范    		 China National Standards
    CC
    English PDF
    GB/T 2102-2006 ACCeptance, packing, marking and quality certification of steel pipe
    钢管的验收、包装、标志和质量证明书    		 China National Standards
    CC
    English PDF
    GB 50372-2006 Code for installation aCCeptance of metallurgical machinery ironmaking equipment engineering
    炼铁机械设备工程安装验收规范    		 China National Standards
    CC
    English PDF
    GB 7251.3-2006 Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for Low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have aCCess for their use - Distribution boards
    低压成套开关设备和控制设备 第3部分：对非专业人员可进入场地的低压成套开关设备和控制设备-配电板的特殊要求    		 China National Standards
    CC
    English PDF
    GB 20812-2006 ACCessories for contact lenses
    角膜接触镜附属用品    		 China National Standards
    CC
    English PDF
    GB 50377-2006 Code for aCCeptance of mineral processing equipment installation engineering
    选矿机械设备工程安装验收规范    		 China National Standards
    CC
    English PDF
    GB/Z 20495-2006 Electronic imaging - Human and organizational issues for suCCessful Electronic Image Management(EIM) implementation
    电子成像 成功实施电子影像管理涉及的人及组织的问题    		 China National Standards
    CC
    English PDF
    GB/T 20319-2006 Code for aCCeptance of Wind turbines generator systems
    风力发电机组 验收规范    		 China National Standards
    CC
    English PDF
    GB/T 20317-2006 Fused Deposition Modeling machines - Testing of the aCCuracy
    熔融沉积快速成形机床 精度检验    		 China National Standards
    CC
    English PDF
    GB 50170-2006 Erection works of electrical installations Code of construction and aCCeptance of rotating electrical machines
    电气装置安装工程旋转电机施工及验收规范    		 China National Standards
    CC
    English PDF
    GB 50168-2006 Erection works of electrical installations Code for construction and aCCeptance of cable levels
    电气装置安装工程电缆线路施工及验收规范    		 China National Standards
    CC
    English PDF
    GB/T 16857.6-2006 Geometrical Product Specifications (GPS) - ACCeptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
    产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第6部分:计算高斯拟合要素的误差的评定    		 China National Standards
    CC
    English PDF
    GB/T 16857.2-2006 Geometrical Product Specifications(GPS) - ACCeptance and reverification tests for coordinate measuring machines(CMM) - Part 2: CMMs used for measuring size
    产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第2部分: 用于测量尺寸的坐标测量机    		 China National Standards
    CC
    English PDF
    GB/T 20299.2-2006 Digital technique application of building and residence community - Part 2: Test and aCCeptance
    建筑及居住区数字化技术应用 第2部分：检测验收    		 China National Standards
    CC
    English PDF
    GB/T 9160.1-2006 Rolling bearings―ACCessories―Part 1: Tapered sleeves
    滚动轴承 附件 第1部分：锥形衬套    		 China National Standards
    CC
    English PDF
    GB 12158-2006 General guideline for preventing electrostatic aCCidents
    防止静电事故通用导则    		 China National Standards
    CC
    English PDF
    GB 50281-2006 Code for construction and aCCeptance of foam fire extinguishing systems
    泡沫灭火系统施工及验收规范    		 China National Standards
    CC
    English PDF
    GB/T 9160.2-2006 Rolling bearings-ACCessories-Part 2:Locknuts and locking devices
    滚动轴承 附件 第2部分:锁紧螺母和锁紧装置    		 China National Standards
    CC
    English PDF
    GB/T 20142-2006 Composite line post insulators for a.c. overhead lines with a norminal voltage greater than 1000V -- Definitions, Test methods and aCCeptance criteria
    标称电压高于1000V的交流架空线路用线路柱式复合绝缘子-定义、试验方法及接收准则    		 China National Standards
    CC
    English PDF
    GB/T 20121-2006 Corrosion of metals and alloys -- Corrosion tests in artificial atmosphere -- ACCelerated outdoor test by intermittent spraying of a salt solution (Scab test)
    金属和合金的腐蚀 人造气氛的腐蚀试验 间歇盐雾下的室外加速试验（疮痂试验）    		 China National Standards
    CC
    English PDF
    GB/T 3810.1-2006 Test methods of ceramic tiles Part 1: Sampling and basis for aCCeptance
    陶瓷砖试验方法 第1部分:抽样和接收条件    		 China National Standards
    CC
    English PDF
    GB/T 15629.1103-2006 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium ACCess Control (MAC) and Physical Layer (PHY) Specifications: Specification
    信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分：无线局域网媒体访问控制和物理层规范：附加管理域操作规范    		 China National Standards
    CC
    English PDF
    GB 15629.1104-2006 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium ACCess Control (MAC) and Physical Layer (PHY) specifications: Further Higher
    信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分：无线局域网媒体访问控制和物理层规范：2.4GHz频段更高数据速率扩展规范    		 China National Standards
    CC
    English PDF
    GB 15629.1101-2006 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium ACCess Control (MAC) and Physical Layer (PHY) specifications: High-Speed Phy
    信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分：无线局域网媒体访问控制和物理层规范：5.8GHz频段高速物理层扩展规范    		 China National Standards
    CC
    English PDF
    GB/T 5289.3-2006 Test conditions for boring and milling machines with horizontal spindle - Testing of the aCCuracy - Part 3: Floor type machines with detached, stationary work-holding table
    卧式铣镗床检验条件 精度检验 第3部分:带分离式工件夹持固定工作台的落地式机床    		 China National Standards
    CC
    English PDF
    GB/T 3932.2-2006 Test conditions for manually controlled milling machines with table of fixed height - Testing of the aCCuracy - Part 2: Machines with vertical spindle
    床身铣床检验条件 精度检验 第2部分:立式铣床    		 China National Standards
    CC
    English PDF
    GB/T 3932.1-2006 Test conditions for manually controlled milling machines with table of fixed height - Testing of the aCCuracy - Part 1: Machines with horizontal spindle
    床身铣床检验条件 精度检验 第1部分:卧式铣床    		 China National Standards
    CC
    English PDF
    GB 20071-2006 The protection of the oCCupants in the event of a lateral collision
    汽车侧面碰撞的乘员保护    		 China National Standards
    CC
    English PDF

    Find out:1786Items   |  To Page of: First -Previous-Next -Last  | [8] [9] [10] [11] [12] [13] [14]

    　

    +86-755-25831330        [email protected] 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2025 All Rights Reserved

    		- Since 2001 -
     Focus on China Standards & Compliance Services

    www.gbstandards.org
    China National Standards