GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 4706.108-2012 |
Household and similar electrical appliances-Safety - Part 2: Particular requirements for heAted carpets and for heating units for room heating installed under removable floor coverings 家用和类似用途电器的安全 第2部分:电热地毯和安装在可移动地板覆盖物下方的用于加热房间的电热装置的特殊要求 |
China National Standards At |
English PDF |
GB 10810.4-2012 |
Uncut finished spectacle lenses - Part 4: SpecificAtions and test methods for anti-reflective coatings 眼镜镜片 第4部分:减反射膜规范及测量方法 |
China National Standards At |
English PDF |
GB/T 28893-2012 |
Surface Chemical Analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and informAtion required when reporting results 表面化学分析 俄歇电子能谱和X射线光电子能谱 测定峰强度的方法和报告结果所需的信息 |
China National Standards At |
English PDF |
GB/T 28891-2012 |
Fibre-reinforced plastic composites - DeterminAtion of mode Ⅰinterlaminar fracture toughness GⅠC for unidirectionally reinforced materials 纤维增强塑料复合材料 单向增强材料Ⅰ型层间断裂韧性GⅠC的测定 |
China National Standards At |
English PDF |
GB/T 28889-2012 |
Test method for In-plane shear properties of composite mAterials 复合材料面内剪切性能试验方法 |
China National Standards At |
English PDF |
GB/T 28885-2012 |
SpecificAtions for City gas service 燃气服务导则 |
China National Standards At |
English PDF |
GB/T 28743-2012 |
Sewage treAtment vessel equipment - General technical requirements 污水处理容器设备 通用技术条件 |
China National Standards At |
English PDF |
GB/T 28742-2012 |
Sewage treAtment equipment for prevention and treatment of water pollution 污水处理设备安全技术规范 |
China National Standards At |
English PDF |
GB/T 28740-2012 |
Equipment of compost treAtment and utilization for manure of poultry and livestock 畜禽养殖粪便堆肥处理与利用设备 |
China National Standards At |
English PDF |
GB/T 28739-2012 |
Kitchen waste treAting and utilizing equipments in catering services 餐饮业餐厨废弃物处理与利用设备 |
China National Standards At |
English PDF |
GB/T 28738-2012 |
Finned built-in heAt pipe for all-glass evacuated solar collector tubes 全玻璃真空太阳集热管内置式带翅片的金属热管 |
China National Standards At |
English PDF |
GB/T 28737-2012 |
Controller for solar wAter heating system (tank volume more than 0.6 m3) 太阳能热水系统(储水箱容积大于0.6 m3)控制装置 |
China National Standards At |
English PDF |
GB/T 28734-2012 |
DeterminAtion of carbon and hydrogen in solid biofuels 固体生物质燃料中碳氢测定方法 |
China National Standards At |
English PDF |
GB/T 28733-2012 |
DeterminAtion of total moisture for solid biofuels 固体生物质燃料全水分测定方法 |
China National Standards At |
English PDF |
GB/T 28732-2012 |
DeterminAtion of total sulfur in solid biofuels 固体生物质燃料全硫测定方法 |
China National Standards At |
English PDF |
GB/T 28731-2012 |
ProximAte analysis of solid biofuels 固体生物质燃料工业分析方法 |
China National Standards At |
English PDF |
GB/T 28730-2012 |
Method for preparAtion of solid biofuels sample 固体生物质燃料样品制备方法 |
China National Standards At |
English PDF |
GB/T 19229.3-2012 |
Coal-fired flue gas desulphurizAtion equipment - Part 3:The equipment for coal-fired flue gas desulphurization by seawater 燃煤烟气脱硫设备 第3部分:燃煤烟气海水脱硫设备 |
China National Standards At |
English PDF |
GB/T 17780.5-2012 |
Textile machinery - Safety requirements - Part 5: PreparAtory machinery to weaving and knitting 纺织机械 安全要求 第5部分:机织和针织准备机械 |
China National Standards At |
English PDF |
GB/T 17780.2-2012 |
Textile machinery - Safety requirements - Part 2: Spinning preparAtory and spinning machines 纺织机械 安全要求 第2部分:纺纱准备和纺纱机械 |
China National Standards At |
English PDF |
GB 21976.7-2012 |
Escape apparAtus for building fire - Part 7: Filtering respiratory protective devices for self-rescue from fire 建筑火灾逃生避难器材 第7部分:过滤式消防自救呼吸器 |
China National Standards At |
English PDF |
GB 21976.6-2012 |
Escape apparAtus for building fire - Part 6: Escape rope 建筑火灾逃生避难器材 第6部分:逃生绳 |
China National Standards At |
English PDF |
GB 21976.3-2012 |
Escape apparAtus for building fire - Part 3: Escape ladder 建筑火灾逃生避难器材 第3部分:逃生梯 |
China National Standards At |
English PDF |
GB 21976.2-2012 |
Escape apparAtus for building fire - Part 2: Automatic and repetitive rescue controlled descent device 建筑火灾逃生避难器材 第2部分:逃生缓降器 |
China National Standards At |
English PDF |
GB 15735-2012 |
Requirements for the safety and health in production process of metal heAt treatment 金属热处理生产过程安全、卫生要求 |
China National Standards At |
English PDF |
GB/T 9945-2012 |
Hot-rolled bulb flAts 热轧球扁钢 |
China National Standards At |
English PDF |
GB/T 4857.23-2012 |
Packaging - Basic tests for transport packages - Part 23:Random vibrAtion test method 包装 运输包装件基本试验 第23部分: 随机振动试验方法 |
China National Standards At |
English PDF |
GB/T 3286.4-2012 |
Methods for chemical analysis of limestone and dolomite - Part 4: The determinAtion of iron oxide content - The o-phenanthroline spectrophotometric method and the flame atomic absorption spectrometric method 石灰石及白云石化学分析方法 第4部分:氧化铁含量的测定 邻二氮杂菲分光光度法和火焰原子吸收光谱法 |
China National Standards At |
English PDF |
GB/T 3286.3-2012 |
Methods for chemical analysis of limestone and dolomite - Part 3: The determinAtion of aluminium oxide content - The chrome azurol S spectrophotometric method and the complexometric titration method 石灰石及白云石化学分析方法 第3部分:氧化铝含量的测定 铬天青S分光光度法和络合滴定法 |
China National Standards At |
English PDF |
GB/T 3286.2-2012 |
Methods for chemical analysis of limestone and dolomite - Part 2: The determinAtion of silicon dioxide content - The silicomolybdic blue spectrophotometric method and the perchloric acid dehydration gravimetric method 石灰石及白云石化学分析方法 第2部分:二氧化硅含量的测定 硅钼蓝分光光度法和高氯酸脱水重量法 |
China National Standards At |
English PDF |
GB/T 3286.1-2012 |
Methods for chemical analysis of limestone and dolomite - Part 1: The determinAtion of calcium oxide and magnesium oxide content - The complexometric titration method and the flame atomic absorption spectrometric method 石灰石及白云石化学分析方法 第1部分:氧化钙和氧化镁含量的测定 络合滴定法和火焰原子吸收光谱法 |
China National Standards At |
English PDF |
GB/T 28909-2012 |
Extra-high strength structural steel plAtes in the heat-treatment condition 超高强度结构用热处理钢板 |
China National Standards At |
English PDF |
GB/T 28907-2012 |
Sulfuric acid dew-point corrosion resistance steel plAtes and strips 耐硫酸露点腐蚀钢板和钢带 |
China National Standards At |
English PDF |
GB/T 28905-2012 |
Low yield strength steel plAtes for construction 建筑用低屈服强度钢板 |
China National Standards At |
English PDF |
GB/T 28901-2012 |
Analysis of coke-oven gas composition by gas chromAtography 焦炉煤气组分气相色谱分析方法 |
China National Standards At |
English PDF |
GB/T 28898-2012 |
EvaluAtion of uncertainty in chemical composition analysis for metallurgical materials 冶金材料化学成分分析测量不确定度评定 |
China National Standards At |
English PDF |
GB/T 28896-2012 |
Metallic MAterials - Method of test for the determination of quasistatic fracture toughness of welds 金属材料 焊接接头准静态断裂韧度测定的试验方法 |
China National Standards At |
English PDF |
GB/T 28895-2012 |
Protective clothing - Performance requirements of oil repellency, sorl release, antistAtic clothing 防护服装 抗油易去污防静电防护服 |
China National Standards At |
English PDF |
GB/T 28882-2012 |
Rare earth carbonAte of ion-absorpted type rare earth ore 离子型稀土矿碳酸稀土 |
China National Standards At |
English PDF |
GB/T 28812-2012 |
Steam turbine specificAtion for geothermal power station 地热发电用汽轮机规范 |
China National Standards At |
English PDF |
GB/T 28765-2012 |
Packaging mAterial - Test methods for organic vapor transmission rate for plastic film, sheet and package 包装材料 塑料薄膜、片材和容器的有机气体透过率试验方法 |
China National Standards At |
English PDF |
GB/T 28761-2012 |
Metalforming machinery - Method of type designAtion 锻压机械 型号编制方法 |
China National Standards At |
English PDF |
GB/T 20167-2012 |
Physical test method of rare earth polishing powder - DeterminAtion of burnishing mass and scratch - Gravimetry 稀土抛光粉物理性能测试方法 抛蚀量和划痕的测定 重量法 |
China National Standards At |
English PDF |
GB/T 20166.2-2012 |
Chemical analysis methods of rare earth polishing powder - Part 2: DeterminAtion fluorine content - Ion selective electrode analysis 稀土抛光粉化学分析方法 第2部分:氟量的测定 离子选择性电极法 |
China National Standards At |
English PDF |
GB/T 20166.1-2012 |
Chemical analysis methods of rare earth polishing powder - Part 1: DeterminAtion of cerium oxide content - Titrimetry 稀土抛光粉化学分析方法 第1部分:氧化铈量的测定 滴定法 |
China National Standards At |
English PDF |
GB/T 18880-2012 |
MAterials for bonded neodymium iron boron permanent magnets 粘结钕铁硼永磁材料 |
China National Standards At |
English PDF |
GB/T 18301-2012 |
Refractory products - DeterminAtion of resistance to abrasion at ambient temperature 耐火材料 常温耐磨性试验方法 |
China National Standards At |
English PDF |
GB/T 18116.1-2012 |
Yttrium-europium oxide - Part 1: DeterminAtion of lanthanum oxide, cerium oxide, praseodymium oxide, neodymium oxide, samarium oxide, gadolinium oxide, terbium oxide, dysprosium oxide, holmium oxide, erbium oxide, thulium oxide, ytterbium oxide and luteti 氧化钇铕化学分析方法 第1部分:氧化镧、氧化铈、氧化镨、氧化钕、氧化钐、氧化钆、氧化铽、氧化镝、氧化钬、氧化铒、氧化铥、氧化镱和氧化镥量的测定 |
China National Standards At |
English PDF |
GB/T 16763-2012 |
Shaped insulAting refractory products - Classification 定形隔热耐火制品分类 |
China National Standards At |
English PDF |
GB/T 16716.7-2012 |
Packaging and packaging waste - Part 7:Recoverable by composting and biodegradAtion 包装与包装废弃物 第7部分: 生物降解和堆肥 |
China National Standards At |
English PDF |
GB/T 14999.4-2012 |
Test methods for superalloys - Part 4: DeterminAtion of characterizing banding grains and primary carbides distribution of superalloy rollings 高温合金试验方法 第4部分:轧制高温合金条带晶粒组织和一次碳化物分布测定 |
China National Standards At |
English PDF |
GB/T 14999.3-2012 |
Test methods for superalloys - Part 3: VerificAtion of longitudinal fracture of bars 高温合金试验方法 第3部分:棒材纵向断口检验 |
China National Standards At |
English PDF |
GB/T 14999.2-2012 |
Test methods for superalloys - Part 2: VerificAtion of transverse macro-structures and defect by etch 高温合金试验方法 第2部分:横向低倍组织及缺陷酸浸检验 |
China National Standards At |
English PDF |
GB/T 14999.1-2012 |
Test method for superalloys - Part 1: VerificAtion of longitudinal macro-structures and defect by etch 高温合金试验方法 第1部分:纵向低倍组织及缺陷酸浸检验 |
China National Standards At |
English PDF |
GB/T 1234-2012 |
High resistance alloys for electrical heAting 高电阻电热合金 |
China National Standards At |
English PDF |
GB 3883.9-2012 |
Safety of hand-held motor-operAted electric tools - Part 2: Particular requirements for tappers 手持式电动工具的安全 第2部分:攻丝机的专用要求 |
China National Standards At |
English PDF |
GB 3883.8-2012 |
Safety of hand-held motor-operAted electric tools - Part 2: Particular requirements for sheet metal shears and nibblers 手持式电动工具的安全 第2部分:电剪刀和电冲剪的专用要求 |
China National Standards At |
English PDF |
GB 3883.7-2012 |
Safety of hand-held motor-operAted electric tools - Part 2: Particular requirements for hammers 手持式电动工具的安全 第2部分:锤类工具的专用要求 |
China National Standards At |
English PDF |
GB 3883.6-2012 |
Safety of hand-held motor-operAted electric tools - Part 2: Particular requirements for drills and impact drills 手持式电动工具的安全 第2部分:电钻和冲击电钻的专用要求 |
China National Standards At |
English PDF |
GB 3883.4-2012 |
Safety of hand-held motor-operAted electric tools - Part 2: Particular requirements for sanders and polishers other than disk type 手持式电动工具的安全 第2部分:非盘式砂光机和抛光机的专用要求 |
China National Standards At |
English PDF |
GB 3883.2-2012 |
Safety of hand-held motor-operAted electric tools - Part 2: Particular requirements for screwdrivers and impact wrenches 手持式电动工具的安全 第2部分:螺丝刀和冲击扳手的专用要求 |
China National Standards At |
English PDF |
GB 3883.21-2012 |
Safety of hand-held motor-operAted electric tools - Part 2: Particular requirements for band saws 手持式电动工具的安全 第2部分:带锯的专用要求 |
China National Standards At |
English PDF |
GB 3883.20-2012 |
Safety of hand-held motor-operAted electric tools - Part 2: Particular requirements for strapping tools 手持式电动工具的安全 第2部分:捆扎机的专用要求 |
China National Standards At |
English PDF |
GB 3883.19-2012 |
Safety of hand-held motor-operAted electric tools - Part 2: Particular requirements for drain cleaners 手持式电动工具的安全 第2部分:管道疏通机的专用要求 |
China National Standards At |
English PDF |
GB 3883.12-2012 |
Safety of hand-held motor-operAted electric tools - Part 2: Particular requirements for concrete vibrators 手持式电动工具的安全 第2部分:混凝土振动器的专用要求 |
China National Standards At |
English PDF |
GB 3883.11-2012 |
Safety of hand-held motor-operAted electric tools - Part 2: Particular requirements for reciprocating saws(jig and sabre saws) 手持式电动工具的安全 第2部分:往复锯(曲线锯、刀锯)的专用要求 |
China National Standards At |
English PDF |
GB 19215.3-2012 |
Cable trunking and ducting systems for electrical installAtions - Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations 电气安装用电缆槽管系统 第2部分:特殊要求 第2节:安装在地板下和与地板齐平的电缆槽管系统 |
China National Standards At |
English PDF |
GB 18082.1-2012 |
Health protection zone for leAther and fur and manufactured products industry - Part 1:Leather tanning industry 皮革、毛皮及其制品业卫生防护距离 第1部分:皮革鞣制加工业 |
China National Standards At |
English PDF |
GB 18079-2012 |
Health protection zone for gelAtin industry 动物胶制造业卫生防护距离 |
China National Standards At |
English PDF |
GB 11887-2012 |
Jewellery - Fineness of precious metal alloys and designAtion 首饰 贵金属纯度的规定及命名方法 |
China National Standards At |
English PDF |
GB/T 28794-2012 |
Technical requirements of oily-wAter separation system fishing vessel 渔业船舶油污水分离系统技术要求 |
China National Standards At |
English PDF |
GB/T 28792-2012 |
Technical specificAtion on radio communication for train control 列车无线调度通信系统技术条件 |
China National Standards At |
English PDF |
GB/T 28788-2012 |
Road geography dAta collection and quality control 公路地理信息数据采集与质量控制 |
China National Standards At |
English PDF |
GB/T 28787-2012 |
DAta communication protocol between on-board information terminal of urban public transit dispatching and control center 城市公共交通调度车载信息终端与调度中心间数据通信协议 |
China National Standards At |
English PDF |
GB/T 983-2012 |
Covered electrodes for manual metal arc welding of stainless and heAt-resisting steels 不锈钢焊条 |
China National Standards At |
English PDF |
GB/T 8926-2012 |
Standard test method for insolubles in used lubricAting oils 在用的润滑油不溶物测定法 |
China National Standards At |
English PDF |
GB/T 7631.13-2012 |
Lubricants,industrial oils and relAted products(class L) - Classification - Part 13: Family A(Total loss systems) 润滑剂、工业用油和有关产品(L类)的分类 第13部分:A组(全损耗系统) |
China National Standards At |
English PDF |
GB/T 9793-2012 |
Thermal spraying - Metallic and other inorganic coAtings - Zinc,aluminium and their alloys 热喷涂 金属和其他无机覆盖层 锌、铝及其合金 |
China National Standards At |
English PDF |
GB/T 6075.2-2012 |
Mechanical vibrAtion - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50MW with normal operating speeds of 1500r/min,1800r/min,3000r/min and 3600r/min 机械振动 在非旋转部件上测量评价机器的振动 第2部分:50MW以上,额定转速1500 r/min、1800 r/min、3000 r/min、3600 r/min陆地安装的汽轮机和发电机 |
China National Standards At |
English PDF |
GB/T 6075.1-2012 |
Mechanical vibrAtion - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines 机械振动 在非旋转部件上测量评价机器的振动 第1部分:总则 |
China National Standards At |
English PDF |
GB/T 4662-2012 |
Rolling bearings - StAtic load ratings 滚动轴承 额定静载荷 |
China National Standards At |
English PDF |
GB/T 4214.7-2012 |
Household and similar electrical appliances - Test code for determinAtion of airborne acoustical noise - Particular requirements for tumble dryers 家用和类似用途电器噪声测试方法 滚筒式干衣机的特殊要求 |
China National Standards At |
English PDF |
GB/T 3965-2012 |
DeterminAtion of diffusible hydrogen in deposited metal 熔敷金属中扩散氢测定方法 |
China National Standards At |
English PDF |
GB/T 28912-2012 |
Test method for two phase relAtive permeability in rock 岩石中两相流体相对渗透率测定方法 |
China National Standards At |
English PDF |
GB/T 28911-2012 |
Vocabulary of drilling engineering for the petroleum and nAtural gas 石油天然气钻井工程术语 |
China National Standards At |
English PDF |
GB/T 28804-2012 |
Copper-free silver mirror on flAt glass 无铜镀银玻璃镜 |
China National Standards At |
English PDF |
GB/T 28799.3-2012 |
Plastics piping systems for hot and cold wAter installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings 冷热水用耐热聚乙烯(PE-RT)管道系统 第3部分:管件 |
China National Standards At |
English PDF |
GB/T 28799.2-2012 |
Plastics piping systems for hot and cold wAter installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes 冷热水用耐热聚乙烯(PE-RT)管道系统 第2部分:管材 |
China National Standards At |
English PDF |
GB/T 28799.1-2012 |
Plastics piping systems for hot and cold wAter installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General 冷热水用耐热聚乙烯(PE-RT)管道系统 第1部分:总则 |
China National Standards At |
English PDF |
GB/T 28796-2012 |
Craft crystal decorAtion 工艺水晶饰品 |
China National Standards At |
English PDF |
GB/T 28795-2012 |
Cold cAthode ultraviolet germicidal lamps 冷阴极紫外线杀菌灯 |
China National Standards At |
English PDF |
GB/T 28786-2012 |
Vacuum technology - Methods of bonding strength measurement for vacuum coAting film - Measuring adhesion by tape test 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法 |
China National Standards At |
English PDF |
GB/T 28785-2012 |
Mechanical vibrAtion - Criteria and safeguards for the in-situ balancing of medium and large rotors 机械振动 大中型转子现场平衡的准则和防护 |
China National Standards At |
English PDF |
GB/T 28784.3-2012 |
Mechanical vibrAtion - Measurement of vibration on ships - Part 3: Pre-installation vibration measurement of shipboard equipment 机械振动 船舶振动测量 第3部分:船上设备安装前的振动测量 |
China National Standards At |
English PDF |
GB/T 28783-2012 |
PneumAtic fluid power - Standard reference atmosphere 气动 标准参考大气 |
China National Standards At |
English PDF |
GB/T 28782.2-2012 |
Hydraulic fluid power - Measurement techniques - Part 2: Measurement of average steady-stAte pressure in a closed conduit 液压传动测量技术 第2部分:密闭回路中平均稳态压力的测量 |
China National Standards At |
English PDF |
GB/T 28781-2012 |
PneumAtic fluid power Compact cylinders, bores form 20mm to 100mm - Basic dimensions and mounting dimensions 气动 缸内径20mm至100mm的紧凑型气缸 基本尺寸、安装尺寸 |
China National Standards At |
English PDF |
GB/T 28779-2012 |
Rolling bearings - Insert bearing units - ClassificAtion 滚动轴承 带座外球面球轴承 分类 |
China National Standards At |
English PDF |
GB/T 28778-2012 |
Pilot-operAted safety valves 先导式安全阀 |
China National Standards At |
English PDF |
GB/T 28777-2012 |
Process valve qualificAtion procedure for the petrochemical industry 石化工业用阀门的评定 |
China National Standards At |
English PDF |
Find out:35997Items | To Page of: First -Previous-Next -Last | [185] [186] [187] [188] [189] [190] [191] |