Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 18375.3-2001 |
ProstHetics--Structural testing of lower-limb prostheses--Part 3:Principle structural tests 假肢 下肢假肢的结构检验 第3部分:主结构检验 |
China National Standards H |
 English PDF |
| GB/T 18375.2-2001 |
ProstHetics--Structural testing of lower-limb prostheses--Part 2:Test samples 假肢 下肢假肢的结构检验 第2部分:试验样品 |
China National Standards H |
English PDF |
| GB/T 18375.1-2001 |
ProstHetics--Structural testing of lower-limb prostheses--Part 1:Test configurations 假肢 下肢假肢的结构检验 第1部分:试验配置 |
China National Standards H |
English PDF |
| GB/T 18365-2001 |
TecHnical conditions for hot-extruding PE protection high strength wire cable of cable-stayed bridge 斜拉桥热挤聚乙烯高强钢丝拉索技术条件 |
China National Standards H |
English PDF |
| GB/T 18364.1-2001 |
Filling receptacle of LPG veHicle(Spird) 汽车用液化石油气加气口(螺旋式) |
China National Standards H |
English PDF |
| GB/T 18363-2001 |
Filling receptacle of CNG veHicle 汽车用压缩天然气加气口 |
China National Standards H |
English PDF |
| GB/T 18368-2001 |
Comfort evaluation of Human exposure to whole-body vibration in recumbent position 卧姿人体全身振动舒适性的评价 |
China National Standards H |
English PDF |
| GB/T 18367-2001 |
Highway toll collection manner 公路收费方式 |
China National Standards H |
English PDF |
| GB/T 18366-2001 |
Rules of names and codes for international-trade sHips 国际贸易运输船舶名称与代码编制原则 |
China National Standards H |
English PDF |
| GB/T 12418-2001 |
THe technical requirements of repairs for steel general purpose containers 钢质通用集装箱修理技术要求 |
China National Standards H |
English PDF |
| GB/T 5304-2001 |
AspHalt thin-film oven test method 石油沥青薄膜烘箱试验法 |
China National Standards H |
English PDF |
| GB 18361-2001 |
Safety requirements of litHium bromide absorption water chiller (heater) 溴化锂吸收式冷(温)水机组安全要求 |
China National Standards H |
English PDF |
| GB/T 11798.9-2001 |
Motor veHicle safety testing equipment--Technical requirements of verification--Part 9:Technical requirements of verification for platform brake tester 机动车安全检测设备 检定技术条件 第9部分:平板制动试验台检定技术条件 |
China National Standards H |
English PDF |
| GB/T 11798.8-2001 |
Motor veHicle safety testing equipment--Technical requirements of verification--Part 8:Technical requirements of verification of motorcycle wheel deviation tester 机动车安全检测设备 检定技术条件 第8部分:摩托车轮偏检测仪检定技术条件 |
China National Standards H |
English PDF |
| GB/T 11798.7-2001 |
MotorveHicle safety testing equipment--Technical requirements of verification--Part 7:Technical requirements of verification for Axle(Wheel) load scales 机动车安全检测设备 检定技术条件 第7部分:轴(轮)重仪检定技术条件 |
China National Standards H |
English PDF |
| GB/T 11798.6-2001 |
Motor veHicle safety testing equipment--Technical requirements of verification--Part 6:Technical requirements of verification for symmetrical beam headlamp tester 机动车安全检测设备 检定技术条件 第6部分:对称光前照灯检测仪检定技术条件 |
China National Standards H |
English PDF |
| GB/T 11798.5-2001 |
Motor veHicle safety testing equipment--Technical requirements of verification--Part 5:Technical requirements of verification for filter type smokemeter 机动车安全检测设备 检定技术条件 第5部分:滤纸式烟度计检定技术条件 |
China National Standards H |
English PDF |
| GB/T 11798.4-2001 |
Motor veHicle safety testing equipment--Technical requirements of verification--Part 4:Technical requirements of verification for speedometer tester of roller type 机动车安全检测设备 检定技术条件 第4部分:滚筒式车速表试验台检定技术条件 |
China National Standards H |
English PDF |
| GB/T 11798.3-2001 |
Motor veHicle safety testing equipment--Technical requirements of verification--Part 3:Technical requirements of verification for gasoline motor vehicle emission analyzer 机动车安全检测设备 检定技术条件 第3部分:汽油车排气分析仪检定技术条件 |
China National Standards H |
English PDF |
| GB/T 11798.2-2001 |
Motor veHicle safety testing equipment--Technical requirements of verification--Part 2:Technical requirements of verification for opposite force roller brake tester 机动车安全检测设备 检定技术条件 第2部分:滚筒反力式制动试验台检定技术条件 |
China National Standards H |
English PDF |
| GB/T 11798.1-2001 |
Motor veHicle safety testing equipment--Technical requirements of verification--Part 1:Technical requirements of verification for side slip tester of slipper type 机动车安全检测设备 检定技术条件 第1部分:滑板式汽车侧滑试验台检定技术条件 |
China National Standards H |
English PDF |
| GB/T 5137.4-2001 |
Road veHicles--Safety glazing materials--Method for the determination of solar transmittance 汽车安全玻璃太阳能透射比测定方法 |
China National Standards H |
English PDF |
| GB/T 3385-2001 |
SHipbuilding and marine structures--Toughened safety glass panes for rectangular windows and side scuttles--Punch method of non-destructive strength testing 船用舷窗和矩形窗钢化安全玻璃 非破坏性强度试验 冲压法 |
China National Standards H |
English PDF |
| GB/T 10303-2001 |
Expanded perlite tHermal insulation 膨胀珍珠岩绝热制品 |
China National Standards H |
English PDF |
| GB 18352.2-2001 |
Limits and measurement metHods for emissions of pollutants from light-duty vehicles(Ⅱ) 轻型汽车污染物排放限值及测量方法(Ⅱ) |
China National Standards H |
English PDF |
| GB 18352.1-2001 |
Limits and measurement metHods foremissions of pollutants from light-duty vehicles(Ⅰ) 轻型汽车污染物排放限值及测量方法(I) |
China National Standards H |
English PDF |
| GB/T 8561-2001 |
Code of professional tecHnical position 专业技术职务代码 |
China National Standards H |
English PDF |
| GB/T 18349-2001 |
Integrated Circuit/Computer Hardware Description Language Verilog 集成电路/计算机硬件描述语言Verilog |
China National Standards H |
English PDF |
| GB/T 18346-2001 |
General criteria for tHe operation of various types of bodies performing inspection 各类检查机构能力的通用要求 |
China National Standards H |
English PDF |
| GB/T 8618-2001 |
THe sampling methods of the main products in the salt industry 制盐工业主要产品取样方法 |
China National Standards H |
English PDF |
| GB/T 18344-2001 |
Specification for tHe inspection and maintenance of motor vehicle 汽车维护、检测、诊断技术规范 |
China National Standards H |
English PDF |
| GB/T 18343-2001 |
Specification for automobile disk brakes being overHauled 汽车盘式制动器修理技术条件 |
China National Standards H |
English PDF |
| GB/T 18345.2-2001 |
Gas turbines--ExHaust gas emission--Part 2:Automated emission monitoring 燃气轮机 烟气排放 第2部分:排放的自动监测 |
China National Standards H |
English PDF |
| GB/T 18345.1-2001 |
Gas turbines--ExHaust gas emission--Part 1:Measurement and evaluation 燃气轮机 烟气排放 第1部分:测量与评估 |
China National Standards H |
English PDF |
| GB 18321-2001 |
Limits for noise emitted by agricultural veHicles 农用运输车 噪声限值 |
China National Standards H |
English PDF |
| GB/T 2930.9-2001 |
Rules for forage seed testing--WeigHt determination 牧草种子检验规程 重量测定 |
China National Standards H |
English PDF |
| GB/T 2930.6-2001 |
Rules for forage seed testing--Seed Health testing 牧草种子检验规程 健康测定 |
China National Standards H |
English PDF |
| GB/T 2930.5-2001 |
Rules for forage seed testing--BiocHemical test for viability 牧草种子检验规程 生活力的生物化学(四唑)测定 |
China National Standards H |
English PDF |
| GB/T 2930.3-2001 |
Rules for forage seed testing--Determination of otHer seeds by number 牧草种子检验规程 其他植物种子数测定 |
China National Standards H |
English PDF |
| GB/T 18337.3-2001 |
Non-commercial forest construction--TecHnical regulation 生态公益林建设 技术规程 |
China National Standards H |
English PDF |
| GB/T 4091-2001 |
SHewhart control charts 常规控制图 |
China National Standards H |
English PDF |
| GB/T 16649.6-2001 |
Identification cards--Integrated circuit(s) cards witH contacts--Part 6:Interindustrv data elements 识别卡 带触点的集成电路卡 第6部分:行业间数据元 |
China National Standards H |
English PDF |
| GB/Z 18333.2-2001 |
Zinc-air batteries for electric road veHicles 电动道路车辆用锌空气蓄电池 |
China National Standards H |
English PDF |
| GB/Z 18333.1-2001 |
LitHium-ion batteries for electric road vehicles 电动道路车辆用锂离子蓄电池 |
China National Standards H |
English PDF |
| GB/T 18338.1-2001 |
Business macHines duplicators--Minimum information to be included in specification sheets 办公机械 速印机规格表中应包含的基本内容 |
China National Standards H |
English PDF |
| GB/T 18332.2-2001 |
Nickel-metal Hydride batteries of electric road vehicles 电动道路车辆用金属氢化物镍蓄电池 |
China National Standards H |
English PDF |
| GB/T 9414.8-2001 |
Guide on maintainabilityof equipment--Part 9:Statistical metHods in maintainability evaluation 设备维修性导则 第九部分:维修性评价的统计方法 |
China National Standards H |
English PDF |
| GB/T 18335-2001 |
Specification for flex-rigid multilayer printed boards witH through connections 有贯穿连接的刚挠多层印制板规范 |
China National Standards H |
English PDF |
| GB/T 18334-2001 |
Specification for flexible multilayer printed boards witH through conections 有贯穿连接的挠性多层印制板规范 |
China National Standards H |
English PDF |
| GB/T 18313-2001 |
Acoustics--Measurement of airborne noise emitted by information tecHnology and telecommunications equipment 声学 信息技术设备和通信设备空气噪声的测量 |
China National Standards H |
English PDF |
| GB/T 18312-2001 |
THe inspection rule for binoculars 双目望远镜检验细则 |
China National Standards H |
English PDF |
| GB/T 50323-2001 |
Code for Urban Construction ArcHives Description 城市建设档案著录规范 |
China National Standards H |
English PDF |
| GB/T 8745-2001 |
Textiles--Burning beHaviour--Determination of surface burning time of fabrics 纺织品 燃烧性能 织物表面燃烧时间的测定 |
China National Standards H |
English PDF |
| GB/T 8632-2001 |
Textiles--Woven fabrics--Determination of dimensional cHange on commercial laundering near the boiling point 纺织品 机织物 近沸点 商业洗烫后尺寸变化的测定 |
China National Standards H |
English PDF |
| GB/T 8631-2001 |
Textiles--Determination of dimensional cHanges of fabrics induced by cold-water immersion 纺织品 织物因冷水浸渍而引起的尺寸变化的测定 |
China National Standards H |
English PDF |
| GB/T 8629-2001 |
Textiles--Domestic wasHing and dryingprocedures for textile testing 纺织品 试验用家庭洗涤和干燥程序 |
China National Standards H |
English PDF |
| GB/T 8424.2-2001 |
Textiles--Tests for colour fastness--Instrumental assessment of relative wHiteness 纺织品 色牢度试验 相对白度的仪器评定方法 |
China National Standards H |
English PDF |
| GB/T 7307-2001 |
Pipe tHreads with 55 degree thread angle where pressure-tight joints are not made on the threads 55°非密封管螺纹 |
China National Standards H |
English PDF |
| GB/T 6075.4-2001 |
MecHanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives 在非旋转部件上测量和评价机器的机械振动 第4部分:不包括航空器类的燃气轮机驱动装置 |
China National Standards H |
English PDF |
| GB/T 4329-2001 |
Tractor and macHinery for agriculture and forestry--Linch pins and spring pins--Dimensions and requirements 农林拖拉机和机具 锁销和弹性销 尺寸和要求 |
China National Standards H |
English PDF |
| GB/T 2543.2-2001 |
Textiles--Determination of twist in yarn--Part 2:Untwist-retwist metHod 纺织品 纱线捻度的测定 第2部分:退捻加捻法 |
China National Standards H |
English PDF |
| GB/T 18329.1-2001 |
Plain bearings--Non-destructive ultrasonic testing of Hond for metallic multilayer plain bearings 滑动轴承 多层金属滑动轴承结合强度的超声波无损检验 |
China National Standards H |
English PDF |
| GB/T 18326-2001 |
Plain bearings--Multilayer materials for tHin-walled plain bearings 滑动轴承 薄壁滑动轴承用金属多层材料 |
China National Standards H |
English PDF |
| GB/T 18325.1-2001 |
Plainbearings--Bearing fatigue--Plain bearings in test rigs and in application underconditions of Hydrodynamic lubrication 滑动轴承 流体动压润滑条件下试验机内和实际应用的滑动轴承疲劳强度 |
China National Standards H |
English PDF |
| GB/T 18324-2001 |
Plain bearings--Copper alloy busHes 滑动轴承 铜合金轴套 |
China National Standards H |
English PDF |
| GB/T 18323-2001 |
Plain bearings--Sintered busHes--Dimensions and tolerances 滑动轴承 烧结轴套的尺寸和公差 |
China National Standards H |
English PDF |
| GB/T 18319-2001 |
Textiles--Testing metHod for thermal retention with accumulated by infrared ray 纺织品 红外蓄热保暖性的试验方法 |
China National Standards H |
English PDF |
| GB/T 18311.3-2001 |
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-3:Examinations andmeasurements--Monitoring cHange in attenuation and in return loss (multiple paths) 纤维光学互连器件和无源器件 基本试验和测量程序 第3-3部分:检查和测量 监测衰减和回波损耗变化(多路) |
China National Standards H |
English PDF |
| GB/T 18310.6-2001 |
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-6:Tests--Tensile strengtH of coupling mechanism 纤维光学互连器件和无源器件 基本试验和测量程序 第2-6部分:试验 锁紧机构抗拉强度 |
China National Standards H |
English PDF |
| GB/T 18310.3-2001 |
Fibre optic interconnecting devices and passive components--Basic test andmeasurement procedures--Part 2-3:Tests--Static sHear load 纤维光学互连器件和无源器件 基本试验和测量程序 第2-3部分:试验 静态剪切力 |
China National Standards H |
English PDF |
| GB/T 18310.18-2001 |
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-18:Tests--Dry Heat--High temperatureendurance 纤维光学互连器件和无源器件 基本试验和测量程序 第2-18部分:试验 干热 高温耐久性 |
China National Standards H |
English PDF |
| GB/T 18307-2001 |
MetHods for chemical analysis of crude silver 粗银化学分析方法 |
China National Standards H |
English PDF |
| GB 18306-2001 |
Seismic ground motion parameter zonation map of CHina 中国地震动参数区划图 |
China National Standards H |
English PDF |
| GB 18208.2-2001 |
Post-eartHquake field works--Part 2:Safety assessment of buildings 地震现场工作 第2部分:建筑物安全鉴定 |
China National Standards H |
English PDF |
| GB/T 18302-2001 |
Basic requirements for instruments to fly tHe National Flag 国旗升挂装置基本要求 |
China National Standards H |
English PDF |
| GB/T 2998-2001 |
SHaped insulating refractory products--Determination of bulk density and true porosity 定形隔热耐火制品 体积密度和真气孔率试验方法 |
China National Standards H |
English PDF |
| GB/T 9252-2001 |
MetHod for cycling test of gas cylinders 气瓶疲劳试验方法 |
China National Standards H |
English PDF |
| GB/T 18297-2001 |
Performance test code for road veHicle engines 汽车发动机性能试验方法 |
China National Standards H |
English PDF |
| GB 9237-2001 |
MecHanical refrigerating systems usedfor cooling and heating--Safety requirements 制冷和供热用机械制冷系统安全要求 |
China National Standards H |
English PDF |
| GB 18296-2001 |
Safety property requirements and test metHods for automobile fuel tank 汽车燃油箱 安全性能要求和试验方法 |
China National Standards H |
English PDF |
| GB 15742-2001 |
Performance requirements and test metHods of horn for motor vehicles 机动车用喇叭的性能要求及试验方法 |
China National Standards H |
English PDF |
| GB/T 18295-2001 |
Analysis metHod of sandstone sample of petroleum and gas reservoir by scanning electron microscope 油气储层砂岩样品 扫描电子显微镜分析方法 |
China National Standards H |
English PDF |
| GB/T 15320-2001 |
Evaluation guides of tHe energy conservation products 节能产品评价导则 |
China National Standards H |
English PDF |
| GB/T 18304-2001 |
Information tecHnology--Chinese specification of internet character transfer format for email 信息技术 因特网中文规范 电子邮件传送格式 |
China National Standards H |
English PDF |
| GB/T 18290.5-2000 |
Solderless connections--Part 5:Solderless press-in connections--General requirements，test metHods and practical guidance 无焊连接 第5部分:无焊压入式连接 一般要求、试验方法和使用导则 |
China National Standards H |
English PDF |
| GB/T 18290.4-2000 |
Solderless connections--Part 4:Solderless non-accessible insulation displacement connections--General requirements，test metHods and practical guidance 无焊连接 第4部分:不可接触无焊绝缘位移连接 一般要求、试验方法和使用导则 |
China National Standards H |
English PDF |
| GB/T 18290.3-2000 |
Solderless connections--Part 3:Solderless accessible insulation displacement connections--General requirements，test metHods and practical guidance 无焊连接 第3部分:可接触无焊绝缘位移连接 一般要求、试验方法和使用导则 |
China National Standards H |
English PDF |
| GB/T 18290.2-2000 |
Solderless connections--Part 2:Solderless crimped connections--General requirements， test metHods and practical guidance 无焊连接 第2部分:无焊压接连接 一般要求、试验方法和使用导则 |
China National Standards H |
English PDF |
| GB/T 18289-2000 |
General specification of nickel-cadmium battery for cellular pHone 蜂窝电话用镉镍电池总规范 |
China National Standards H |
English PDF |
| GB/T 18288-2000 |
General specification of nickel-metal Hydride battery for cellular phone 蜂窝电话用金属氢化物镍电池总规范 |
China National Standards H |
English PDF |
| GB/T 18286-2000 |
Information tecHnology--Control functionsfor text communication 信息技术 文本通信用控制功能 |
China National Standards H |
English PDF |
| GB/T 15237.1-2000 |
Terminology work--Vocabulary--Part 1:THeory and application 术语工作 词汇 第1部分:理论与应用 |
China National Standards H |
English PDF |
| GB/T 18277-2000 |
Highway toll collection mode 公路收费制式 |
China National Standards H |
English PDF |
| GB/T 18276-2000 |
Test-bed metHods and evaluating index of dynamic property for motor vehicles 汽车动力性台架试验方法和评价指标 |
China National Standards H |
English PDF |
| GB/T 18275.2-2000 |
Specifications for automobile braking transmission device being overHauled--Hydraulic braking 汽车制动传动装置修理技术条件 液压制动 |
China National Standards H |
English PDF |
| GB/T 18275.1-2000 |
Specifications for automobile braking transmission device being overHauled--Air braking 汽车制动传动装置修理技术条件 气压制动 |
China National Standards H |
English PDF |
| GB/T 18274-2000 |
TecHnical specifications for motor vehicle drum brake being overhauled 汽车鼓式制动器修理技术条件 |
China National Standards H |
English PDF |
| GB/T 18273-2000 |
Petroleum and liquid petroleum products--Direct static measurements--Contents ofvertical storage tanks--Mass measurement by Hydrostatic tank gauging 石油和液体石油产品 立式罐内油量的直接静态测量法 (HTG质量测量法) |
China National Standards H |
English PDF |
| GB 9706.20-2000 |
Medical electrical equipment--Part 2:Particular requirements for tHe safety of diagnostic andtherapeutic laser equipment 医用电气设备 第2部分:诊断和治疗激光设备安全专用要求 |
China National Standards H |
English PDF |
| GB 18282.1-2000 |
Sterilization of Health care products--Chemical indicators--Part 1:General requirements 医疗保健产品灭菌 化学指示物 第1部分:通则 |
China National Standards H |
English PDF |
| Find out:38864Items | To Page of: First -Previous-Next -Last | [344] [345] [346] [347] [348] [349] [350] |
+86-755-25831330
