Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 39423-2020 |
Road veHicles—Collection of accident data for evaluation of occupant restraint performance 道路车辆 评价乘员约束性能的事故数据收集 |
China National Standards H |
 English PDF |
| GB/T 39422-2020 |
Determination metHods of characteristic values for dowel-bearing strength and withdrawal capacity of nails and screws in timber structure 木结构销槽承压强度及钉连接承载力特征值确定方法 |
China National Standards H |
English PDF |
| GB/T 39421-2020 |
MetHods for determining the static gel strength of cement formulations 水泥浆静胶凝强度测定方法 |
China National Standards H |
English PDF |
| GB/T 39417-2020 |
Health management of large-scale amusement device 大型游乐设施健康管理 |
China National Standards H |
English PDF |
| GB/T 39416-2020 |
Test metHods of fuel consumption for truck crane 汽车起重机燃油消耗量试验方法 |
China National Standards H |
English PDF |
| GB/T 39413-2020 |
Performance requirements and test metHods for BeiDou navigation satellite system signal simulator 北斗卫星导航系统信号模拟器性能要求及测试方法 |
China National Standards H |
English PDF |
| GB/T 39412-2020 |
Information security tecHnology—Audit specification of code security 信息安全技术 代码安全审计规范 |
China National Standards H |
English PDF |
| GB/T 39411-2020 |
TecHnical requirements of BeiDou satellite common-view time transfer 北斗卫星共视时间传递技术要求 |
China National Standards H |
English PDF |
| GB/T 39410-2020 |
General specification for GNSS geodetic receivers onboard low eartH orbit satellite 低轨星载GNSS测量型接收机通用规范 |
China National Standards H |
English PDF |
| GB/T 39407-2020 |
Grinding and polisHing robot system—General specification 研磨抛光机器人系统 通用技术条件 |
China National Standards H |
English PDF |
| GB/T 39406-2020 |
Specification of XML excHange of PLC-based software development platform for industrial robots 工业机器人可编程控制器软件开发平台程序的XML交互规范 |
China National Standards H |
English PDF |
| GB/T 39401-2020 |
THe data exchange of cloud service platform for industrial robot 工业机器人云服务平台数据交换 |
China National Standards H |
English PDF |
| GB/T 39400-2020 |
Industrial data quality—General tecHnical specification 工业数据质量 通用技术规范 |
China National Standards H |
English PDF |
| GB/T 39395-2020 |
Test metHod for buckling resistance of the thermoplastics inspection chamber bases 热塑性塑料检查井井座抗压失稳试验方法 |
China National Standards H |
English PDF |
| GB/T 39394-2020 |
Test metHod for LED lamps, LED luminaires and LED modules LED灯、LED灯具和LED模块的测试方法 |
China National Standards H |
English PDF |
| GB/T 39393-2020 |
TecHnical specification of intelligent controller unit for household appliances 家用电器专用智能控制单元技术规范 |
China National Standards H |
English PDF |
| GB/T 39392-2020 |
TecHnical specification of intelligent power module for household appliances 家用电器专用智能功率模块技术规范 |
China National Standards H |
English PDF |
| GB/T 39472-2020 |
Performance requirements and test metHods for BeiDou navigation satellite system signal record and playback devices 北斗卫星导航系统信号采集回放仪性能要求及测试方法 |
China National Standards H |
English PDF |
| GB/T 39357-2020 |
Specification for construction of cultivation base of wHite jelly fungus 银耳栽培基地建设规范 |
China National Standards H |
English PDF |
| GB/T 39334.5-2020 |
Digital simulation of mecHanical products manufacturing process—Part 5: Requirements of typical process simulation 机械产品制造过程数字化仿真 第5部分：典型工艺仿真要求 |
China National Standards H |
English PDF |
| GB/T 39334.4-2020 |
Digital simulation of mecHanical products manufacturing process—Part 4: Requirements of NC machining process simulation 机械产品制造过程数字化仿真 第4部分：数控加工过程仿真要求 |
China National Standards H |
English PDF |
| GB/T 39334.3-2020 |
Digital simulation of mecHanical products manufacturing process—Part 3: Requirements of assembly workshop logistics simulation 机械产品制造过程数字化仿真 第3部分：装配车间物流仿真要求 |
China National Standards H |
English PDF |
| GB/T 39334.2-2020 |
Digital simulation of mecHanical products manufacturing process—Part 2: Requirements of production line planning and layout simulation 机械产品制造过程数字化仿真 第2部分：生产线规划和布局仿真要求 |
China National Standards H |
English PDF |
| GB/T 39334.1-2020 |
Digital simulation of mecHanical products manufacturing process—Part 1: General requirements 机械产品制造过程数字化仿真 第1部分：通用要求 |
China National Standards H |
English PDF |
| GB/T 39259-2020 |
Green manufacturing—Green supply cHain management in manufacturing enterprises—Requirements for bill of material 绿色制造 制造企业绿色供应链管理 物料清单要求 |
China National Standards H |
English PDF |
| GB/T 39258-2020 |
Green manufacturing—Green supply cHain management in manufacturing enterprises—Control of purchase 绿色制造 制造企业绿色供应链管理 采购控制 |
China National Standards H |
English PDF |
| GB/T 39257-2020 |
Green manufacturing—Green supply cHain management in manufacturing enterprises—Specifications for assessment 绿色制造 制造企业绿色供应链管理 评价规范 |
China National Standards H |
English PDF |
| GB/T 39256-2020 |
Green manufacturing—Green supply cHain management in manufacturing enterprises—Specifications of informatization management platform 绿色制造 制造企业绿色供应链管理 信息化管理平台规范 |
China National Standards H |
English PDF |
| GB/T 39228-2020 |
Determination of soil microbial biomass—Fumigation-extraction metHod 土壤微生物生物量的测定 熏蒸提取法 |
China National Standards H |
English PDF |
| GB/T 35381.14-2020 |
Tractors and macHinery for agriculture and forestry—Serial control and communications data network—Part 14：Sequence control 农林拖拉机和机械 串行控制和通信数据网络 第14部分：顺序控制 |
China National Standards H |
English PDF |
| GB/T 35381.12-2020 |
Tractors and macHinery for agriculture and forestry—Serial control and communications data network—Part 12：Diagnostics services 农林拖拉机和机械 串行控制和通信数据网络 第12部分：诊断服务 |
China National Standards H |
English PDF |
| GB/T 20323-2020 |
Milling cutters designation —SHank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges 铣刀代号 整体或镶齿结构或带可转位切削刃的带柄和带孔铣刀 |
China National Standards H |
English PDF |
| GB/T 19703-2020 |
In vitro diagnostic medical devices—Measurement of quantities in samples of biological origin—Requirements for certified reference materials and tHe content of supporting documentation 体外诊断医疗器械 生物源性样品中量的测量 有证参考物质及支持文件内容的要求 |
China National Standards H |
English PDF |
| GB/T 39495-2020 |
Metallic and otHer inorganic coatings—Chromate-free chemical conversion coatings on allumion and its alloys 金属及其他无机覆盖层 铝及铝合金无铬化学转化膜 |
China National Standards H |
English PDF |
| GB/T 39494-2020 |
Determination for coating adHesion of rare earth permanent magnetic materials for drive motor of new energy vehicle 新能源汽车驱动电机用稀土永磁材料表面涂镀层结合力的测定 |
China National Standards H |
English PDF |
| GB/T 39492-2020 |
Testing metHod of quantum efficiency for white LED phosphor 白光LED用荧光粉量子效率测试方法 |
China National Standards H |
English PDF |
| GB/T 39491-2020 |
General tecHnical requirements of carbon fiber composites covering parts for automobiles 汽车用碳纤维复合材料覆盖部件通用技术要求 |
China National Standards H |
English PDF |
| GB/T 39490-2020 |
Test metHod for liquid impingement erosion resistance of fiber-reinforced plastics—Rotating apparatus method 纤维增强塑料液体冲击抗侵蚀性试验方法 旋转装置法 |
China National Standards H |
English PDF |
| GB/T 39489-2020 |
TecHnical specification for the total tailings paste backfill 全尾砂膏体充填技术规范 |
China National Standards H |
English PDF |
| GB/T 39487-2020 |
Test metHod of tube shear strength for structural foaming adhesives 发泡结构胶粘剂管剪强度试验方法 |
China National Standards H |
English PDF |
| GB/T 39486-2020 |
CHemical reagent—General rules for inductively coupled plasma mass spectrometry 化学试剂 电感耦合等离子体质谱分析方法通则 |
China National Standards H |
English PDF |
| GB/T 39484-2020 |
Fibre-reinforced plastic composites—Determination of tHe mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 |
China National Standards H |
English PDF |
| GB/T 39483.1-2020 |
Rubber and plastics injection moulding macHine—Interface —Part 1: Mechanical and electrical interface 橡胶塑料注射成型机 接口 第1部分：机械和电气接口 |
China National Standards H |
English PDF |
| GB/T 39482.3-2020 |
ElectrocHemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens—Part 3: Processing and analysis of data from dummy cells 涂漆和未涂漆金属试样的电化学阻抗谱（EIS） 第3部分：从模拟电解池获得数据的处理和分析 |
China National Standards H |
English PDF |
| GB/T 39327-2020 |
Rubber and plastics Hoses for marine-engine wet-exhaust systems—Specification 船用发动机湿式排气系统用橡胶和塑料软管 规范 |
China National Standards H |
English PDF |
| GB/T 39313-2020 |
Rubber Hoses and hose assemblies—Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids—Specification 橡胶软管及软管组合件 输送石油基或水基流体用致密钢丝编织增强液压型 规范 |
China National Standards H |
English PDF |
| GB/T 39311-2020 |
THermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification 热塑性软管和软管组合件 液压用钢丝或合成纱线增强单一压力型 规范 |
China National Standards H |
English PDF |
| GB/T 39309-2020 |
Rubber Hoses and hose assemblies—Wire- or textile-reinforced single-pressure types for hydraulic applications—Specification 橡胶软管和软管组合件 液压用钢丝或织物增强单一压力型 规范 |
China National Standards H |
English PDF |
| GB/T 39308-2020 |
TecHnical specification for refractory organic wastewater advanced treatment 难降解有机废水深度处理技术规范 |
China National Standards H |
English PDF |
| GB/T 39307-2020 |
Fluorescent wHitening agents—Determination of shade and relative whiteness—Plastic coloring 荧光增白剂 色光和增白强度的测定 塑料着色法 |
China National Standards H |
English PDF |
| GB/T 39305-2020 |
Reclaimed water quality—Determination of fluoride,cHloride,nitrite,nitrate,sulfate—Ion chromatography 再生水水质 氟、氯、亚硝酸根、硝酸根、硫酸根的测定 离子色谱法 |
China National Standards H |
English PDF |
| GB/T 39304-2020 |
General tecHnical specification for sample pre-treatment of biological toxicity detection in reclaimed water 再生水生物毒性检测的样品前处理通用技术规范 |
China National Standards H |
English PDF |
| GB/T 39303-2020 |
General tecHnical specification for pre-treatment of microorganism samples in wastewater treatment system 废水处理系统微生物样品前处理通用技术规范 |
China National Standards H |
English PDF |
| GB/T 39302-2020 |
Reclaimed water quality—Determination of anionic surfactants—MetHylene blue spectrophotometric method 再生水水质 阴离子表面活性剂的测定 亚甲蓝分光光度法 |
China National Standards H |
English PDF |
| GB/T 39301-2020 |
Disposal metHod for electroplating sludge reduction 电镀污泥减量化处置方法 |
China National Standards H |
English PDF |
| GB/T 39300-2020 |
Treatment and disposal metHod for chromium-containing electroplating sludge 含铬电镀污泥处理处置方法 |
China National Standards H |
English PDF |
| GB/T 39299-2020 |
MetHods for disposing reused thinner waste in the production of TFT-LCD 液晶面板制造稀释废液回收再利用方法 |
China National Standards H |
English PDF |
| GB/T 39298-2020 |
Reclaimed water quality—Determination of benzene Homologues—Gas chromatography 再生水水质 苯系物的测定 气相色谱法 |
China National Standards H |
English PDF |
| GB/T 39296-2020 |
Operation effect evaluation of recirculating cooling water treatment—MetHod of monitoring heat exchanger 循环冷却水处理运行效果评价 监测换热器法 |
China National Standards H |
English PDF |
| GB/T 39295-2020 |
Determination of tHe tack for water based adhesive 水性胶粘剂触粘性的测定 |
China National Standards H |
English PDF |
| GB/T 39294-2020 |
Determination of tHe discoloration performence for adhesive 胶粘剂变色（黄变）性能的测定 |
China National Standards H |
English PDF |
| GB/T 39292-2020 |
MetHod of sampling and sample preparation for analysis of palladium carbon wastes 废钯炭分析用取样和制样方法 |
China National Standards H |
English PDF |
| GB/T 39291-2020 |
Test metHod for impact wear properties of studs 鞋钉冲击磨损性能试验方法 |
China National Standards H |
English PDF |
| GB/T 39290-2020 |
Determination tHe content of the aromatic amines in adhesives 胶粘剂中芳香胺含量的测定 |
China National Standards H |
English PDF |
| GB/T 39289-2020 |
Determination of tHe adhesion strength—Plastic and metal 胶粘剂粘接强度的测定 金属与塑料 |
China National Standards H |
English PDF |
| GB/T 39288-2020 |
THermal storage device with electrical input and thermal output 蓄热型电加热装置 |
China National Standards H |
English PDF |
| GB/T 39286-2020 |
Absorption Heat exchanger 吸收式换热器 |
China National Standards H |
English PDF |
| GB/T 39285-2020 |
MetHod for chemical analysis of palladium compounds—Determination of chlorine content—Ion chromatography 钯化合物分析方法 氯含量的测定 离子色谱法 |
China National Standards H |
English PDF |
| GB/T 39284-2020 |
Treatment and disposal metHod for filter sludge from magnesium sulfate production process 硫酸镁生产滤泥的处理处置方法 |
China National Standards H |
English PDF |
| GB/T 39249-2020 |
Rubber and plastics Hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验 |
China National Standards H |
English PDF |
| GB/T 39248-2020 |
THermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification 输送液化石油气和液化天然气用热塑性塑料多层（非硫化）软管及软管组合件 规范 |
China National Standards H |
English PDF |
| GB/T 39246-2020 |
Prefabricated directly buried insulating fittings witH seamless high density polyethylene casing pipe 高密度聚乙烯无缝外护管预制直埋保温管件 |
China National Standards H |
English PDF |
| GB/T 39233-2020 |
LantHanum-copper alloys 镧铜合金 |
China National Standards H |
English PDF |
| GB/T 39231-2020 |
Cerium cHloride anhydrate 无水氯化铈 |
China National Standards H |
English PDF |
| GB/T 39188-2020 |
General tecHnical specification of electric windows and doors (gates) 电动门窗通用技术要求 |
China National Standards H |
English PDF |
| GB/T 39163-2020 |
Test metHods of the bonding strength for target-backing plate assemblies 靶材与背板结合强度测试方法 |
China National Standards H |
English PDF |
| GB/T 39160-2020 |
Cadmium zinc telluride target for tHin-film solar cells 薄膜太阳能电池用碲锌镉靶材 |
China National Standards H |
English PDF |
| GB/T 39159-2020 |
High purity copper alloy target for integrated circuit 集成电路用高纯铜合金靶材 |
China National Standards H |
English PDF |
| GB/T 39158-2020 |
High purity copper rotatable tube target for flat panel display 平面显示用高纯铜旋转管靶 |
China National Standards H |
English PDF |
| GB/T 39157-2020 |
Classification and definition of tHe technology readiness levels for targets 靶材技术成熟度等级划分及定义 |
China National Standards H |
English PDF |
| GB/T 39156-2020 |
TecHnical requirements and test methods for large format ceramic slab 大规格陶瓷板技术要求及试验方法 |
China National Standards H |
English PDF |
| GB/T 36805.2-2020 |
Plastics—Determination of tensile properties at High strain rates—Part 2: Direct testing method 塑料 高应变速率下的拉伸性能测定 第2部分：直接测试法 |
China National Standards H |
English PDF |
| GB/T 35465.6-2020 |
Test metHod for fatigue properties of polymer matrix composite materials—Part 6:Fatige properties of adhesives in shear by tension 聚合物基复合材料疲劳性能测试方法 第6部分：胶粘剂拉伸剪切疲劳 |
China National Standards H |
English PDF |
| GB/T 35465.5-2020 |
Test metHod for fatigue properties of polymer matrix composite materials—Part 5: Flexural fatigue 聚合物基复合材料疲劳性能测试方法 第5部分：弯曲疲劳 |
China National Standards H |
English PDF |
| GB/T 35465.4-2020 |
Test metHod for fatigue properties of polymer matrix composite materials—Part 4: Tension-compression fatigue and compression-compression fatigue 聚合物基复合材料疲劳性能测试方法 第4部分：拉-压和压-压疲劳 |
China National Standards H |
English PDF |
| GB/T 32224-2020 |
Heat meters 热量表 |
China National Standards H |
English PDF |
| GB/T 31334.6-2020 |
Test metHods for dipped canvas—Part 6 : Determinations of size, grammage, etc 浸胶帆布试验方法 第6部分：尺寸、克重等基本项目测量 |
China National Standards H |
English PDF |
| GB/T 28125.2-2020 |
Gas analysis—Determination of Hazardous materials in air separation process—Part 2:Determination of mineral oil 气体分析 空分工艺中危险物质的测定 第2部分：矿物油的测定 |
China National Standards H |
English PDF |
| GB/T 26548.7-2020 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 7:Nibbler and shears 手持便携式动力工具 振动试验方法 第7部分：冲剪机和剪刀 |
China National Standards H |
English PDF |
| GB/T 25807-2020 |
m-Carbamidoaniline Hydrochloride 间脲基苯胺盐酸盐 |
China National Standards H |
English PDF |
| GB/T 24982-2020 |
Garnet aluminate series of rare eartH phosphors for white LED 白光LED用石榴石结构铝酸盐系列荧光粉 |
China National Standards H |
English PDF |
| GB/T 24981.2-2020 |
Test metHods of rare earth long afterglow phosphors—Part 2: Determination of afterglow brightness 稀土长余辉荧光粉试验方法 第2部分：余辉亮度的测定 |
China National Standards H |
English PDF |
| GB/T 24981.1-2020 |
Test metHods of rare earth long afterglow phosphors—Part 1: Determination of emission dominantpeak and chromaticity coordinates 稀土长余辉荧光粉试验方法 第1部分：发射主峰和色品坐标的测定 |
China National Standards H |
English PDF |
| GB/T 24980-2020 |
Rare eartH long afterglow phosphors 稀土长余辉荧光粉 |
China National Standards H |
English PDF |
| GB/T 24165-2020 |
Determination of polycHlorinated biphenyls in dye products 染料产品中多氯联苯的测定 |
China National Standards H |
English PDF |
| GB/T 24164-2020 |
Determination of cHlorinated benzenes in dye products 染料产品中氯化苯的测定 |
China National Standards H |
English PDF |
| GB/T 23978-2020 |
Determination of cHloride in water-soluble dyes 水溶性染料产品中氯化物的测定 |
China National Standards H |
English PDF |
| GB/T 23937-2020 |
Sodium Hydrosulfide for industrial use 工业硫氢化钠 |
China National Standards H |
English PDF |
| GB/T 23514-2020 |
MetHods for chemical analysis of nuclear-grade Ag-In-Cd alloys 核级银-铟-镉合金化学分析方法 |
China National Standards H |
English PDF |
| GB/T 20975.8-2020 |
MetHods for chemical analysis of aluminium and aluminium alloys—Part 8：Determination of zinc content 铝及铝合金化学分析方法 第8部分：锌含量的测定 |
China National Standards H |
English PDF |
| Find out:38864Items | To Page of: First -Previous-Next -Last | [66] [67] [68] [69] [70] [71] [72] |
+86-755-25831330
