GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 27514-2011 |
Technical regulation of reseeding on sandy grasSLand 沙地草场牧草补播技术规程 |
China National Standards SL |
English PDF |
GB/T 26919-2011 |
Coal preparation plant - Methods for the natural falling testing of SLurry 选煤厂 煤泥水自然沉降试验方法 |
China National Standards SL |
English PDF |
GB/T 26882.2-2011 |
Grain and oil storage - Monitoring and control system of stored-grain condition - Part 2:SLave computer 粮油储藏 粮情测控系统 第2部分:分机 |
China National Standards SL |
English PDF |
GB/T 26848-2011 |
Natural SLate for furniture 家具用天然石板 |
China National Standards SL |
English PDF |
GB/T 26751-2011 |
Ground granulated electirc furnace phosphorous SLag powder used for cement and concrete 用于水泥和混凝土中的粒化电炉磷渣粉 |
China National Standards SL |
English PDF |
GB/T 26542-2011 |
Test methods for anti-SLip property of ceramic tile 陶瓷砖防滑性试验方法 |
China National Standards SL |
English PDF |
GB 50693-2011 |
Technical code for SLope roof engineering 坡屋面工程技术规范 |
China National Standards SL |
English PDF |
GB/T 1156-2011 |
SLeeve type drip-feed lubricating cups 旋套式注油油杯 |
China National Standards SL |
English PDF |
GB/T 26392-2011 |
SLow recovery foam - Determination of recovery time 慢回弹泡沫 复原时间的测定 |
China National Standards SL |
English PDF |
GB/T 9119-2010 |
SLip-on-welding plate steel pipe flanges 板式平焊钢制管法兰 |
China National Standards SL |
English PDF |
GB/T 9116-2010 |
Hubbed SLip-on-welding steel pipe flanges 带颈平焊钢制管法兰 |
China National Standards SL |
English PDF |
GB/T 26071-2010 |
Mono-crystalline silicon as cut SLices for photovoltaic solar cells 太阳能电池用硅单晶切割片 |
China National Standards SL |
English PDF |
GB/T 26045-2010 |
The lead calcium alloys ingot for the accumulator cell SLab lattice 蓄电池板栅用铅钙合金锭 |
China National Standards SL |
English PDF |
GB/T 25999-2010 |
Ceramic liner with steel SLeeve for mud pump 泥浆泵用金属-陶瓷缸套 |
China National Standards SL |
English PDF |
GB/T 25875-2010 |
Guideline for segmentating and monitoring the inhabitable area of locust and grasshopper in grasSLand 草原蝗虫宜生区划分与监测技术导则 |
China National Standards SL |
English PDF |
GB/T 25855-2010 |
Links of Grade 8 for use with SLings 索具用8级连接环 |
China National Standards SL |
English PDF |
GB/T 25853-2010 |
Chain SLings assembled by methods other than welding - Grade 8 8级非焊接吊链 |
China National Standards SL |
English PDF |
GB/T 25758.3-2010 |
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: SLit camera radiographic method 无损检测 工业X射线系统焦点特性 第3部分:狭缝照相机射线照相方法 |
China National Standards SL |
English PDF |
GB/T 25824-2010 |
Steel SLag for road 道路用钢渣 |
China National Standards SL |
English PDF |
GB/T 25674-2010 |
Screw SLotting saws 螺钉槽铣刀 |
China National Standards SL |
English PDF |
GB 25490-2010 |
Safety of woodworking machines - Single end tenoning machines with SLiding table 木工机床安全 带移动工作台单头开榫机 |
China National Standards SL |
English PDF |
GB 10395.24-2010 |
Agricultural and forestry machinery - Safety - Part 24:SLurry tankers 农林机械 安全 第24部分:液体肥料施肥车 |
China National Standards SL |
English PDF |
GB/T 20719.11-2010 |
Industrial automation systems and integration - Process specification language -Part 11: PSL core 工业自动化系统与集成 过程规范语言 第11部分:PSL核心 |
China National Standards SL |
English PDF |
GB/T 25649-2010 |
Road construction and road maintenance machinery and equipment - SLurry seal machine 道路施工与养护机械设备 稀浆封层机 |
China National Standards SL |
English PDF |
GB/T 25611-2010 |
Earth-moving machinery - Determination of SLope limits for machine fluid systems operation - Static test method 土方机械 机器液体系统作业的坡道极限值测定 静态法 |
China National Standards SL |
English PDF |
GB/T 25422-2010 |
Subsoiling plow for grasSLand 草地潜松犁 |
China National Standards SL |
English PDF |
GB/T 25278-2010 |
Plastics - Determination of the fluidity of plastics using capillary and SLit-die rheometers 塑料 用毛细管和狭缝口模流变仪测定塑料的流动性 |
China National Standards SL |
English PDF |
GB/T 25277-2010 |
Plastics - Determination of phenolic antioxidants and erucamide SLip additives in polypropylene homopolymer formulations - liquid chromatography (LC) 塑料 均聚聚丙烯(PP-H)中酚类抗氧剂和芥酸酰胺爽滑剂的测定 液相色谱法 |
China National Standards SL |
English PDF |
GB/T 25236-2010 |
Grain and oil machine - SLice hammer smasher for inspection 粮油机械 检验用锤片粉碎机 |
China National Standards SL |
English PDF |
GB/T 23561.16-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 16: Method for determining SLake durability index of rock 煤和岩石物理力学性质测定方法 第16部分:岩石耐崩解性指数测定方法 |
China National Standards SL |
English PDF |
GB 25029-2010 |
Steel SLag cement for road 钢渣道路水泥 |
China National Standards SL |
English PDF |
GB/T 25053-2010 |
ContinuouSLy hot rolled low carbon steel sheet and strip 热连轧低碳钢板及钢带 |
China National Standards SL |
English PDF |
GB/T 25052-2010 |
ContinuouSLy hot-dip coated steel sheet and strip - Tolerances on dimensions,shape and weight 连续热浸镀层钢板和钢带尺寸、外形、重量及允许偏差 |
China National Standards SL |
English PDF |
GB/T 20887.5-2010 |
ContinuouSLy hot rolled high strength steel sheet and strip for automobile - Part 5: Martensitic steel 汽车用高强度热连轧钢板及钢带 第5部分:马氏体钢 |
China National Standards SL |
English PDF |
GB/T 20887.4-2010 |
ContinuouSLy hot rolled high strength steel sheet and strip for automobile - Part 4: Transformation induced plasticity steel 汽车用高强度热连轧钢板及钢带 第4部分:相变诱导塑性钢 |
China National Standards SL |
English PDF |
GB/T 20887.3-2010 |
ContinuouSLy hot rolled high strength steel sheet and strip for automobile - Part 3: Dual phase steel 汽车用高强度热连轧钢板及钢带 第3部分:双相钢 |
China National Standards SL |
English PDF |
GB/T 20887.2-2010 |
ContinuouSLy hot rolled high strength steel sheet and strip for automobile - Part 2: High hole expansion steel 汽车用高强度热连轧钢板及钢带 第2部分:高扩孔钢 |
China National Standards SL |
English PDF |
GB/T 20564.7-2010 |
ContinuouSLy cold rolled high strength steel sheet and strip for automobile - Part 7: Martensitic steels 汽车用高强度冷连轧钢板及钢带 第7部分:马氏体钢 |
China National Standards SL |
English PDF |
GB/T 20564.6-2010 |
ContinuouSLy cold rolled high strength steel sheet and strip for automobile - Part 6: Transformation induced plasticity steel 汽车用高强度冷连轧钢板及钢带 第6部分:相变诱导塑性钢 |
China National Standards SL |
English PDF |
GB/T 20564.5-2010 |
ContinuouSLy cold rolled high strength steel sheet and strip for automobile - Part 5: Isotropic steel 汽车用高强度冷连轧钢板及钢带 第5部分:各向同性钢 |
China National Standards SL |
English PDF |
GB/T 20564.4-2010 |
ContinuouSLy cold rolled high strength steel sheet and strip for automobile - Part 4: High strength low alloy steel 汽车用高强度冷连轧钢板及钢带 第4部分:低合金高强度钢 |
China National Standards SL |
English PDF |
GB/T 25031-2010 |
Disposal of SLudge from municipal wastewater treatment plant - Quality of sludge used in making brick 城镇污水处理厂污泥处置 制砖用泥质 |
China National Standards SL |
English PDF |
GB/T 24892-2010 |
Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (SLip point) 动植物油脂 在开口毛细管中熔点(滑点)的测定 |
China National Standards SL |
English PDF |
GB/T 24874-2010 |
Data standard for spatial information sharing of grasSLand resource 草地资源空间信息共享数据规范 |
China National Standards SL |
English PDF |
GB/T 24816-2009 |
Short link chain for lifting purposes - Grade 8,non-calibrated,for chain SLings etc. 起重用短环链 吊链等用8级普通精度链 |
China National Standards SL |
English PDF |
GB/T 24815-2009 |
Short link chain for lifting purposes - Grade 6,non-calibrated,for chain SLings etc. 起重用短环链 吊链等用6级普通精度链 |
China National Standards SL |
English PDF |
GB/T 24814-2009 |
Short link chain for lifting purposes - Grade 4,non-calibrated,for chain SLings etc. 起重用短环链 吊链等用4级普通精度链 |
China National Standards SL |
English PDF |
GB/T 24766-2009 |
Steel SLag for pervious asphalt pave 透水沥青路面用钢渣 |
China National Standards SL |
English PDF |
GB/T 24765-2009 |
Steel SLag for wearing asphalt pave 耐磨沥青路面用钢渣 |
China National Standards SL |
English PDF |
GB/T 24764-2009 |
Steel SLag sand for polymer modified mortar for external thermal insulation on outer-walls 外墙外保温抹面砂浆和粘结砂浆用钢渣砂 |
China National Standards SL |
English PDF |
GB/T 24763-2009 |
Steel SLag for foamed concrete blocks 泡沫混凝土砌块用钢渣 |
China National Standards SL |
English PDF |
GB/T 24602-2009 |
Disposal of SLudge from municipal wastewater treatment plant - Quality of sludge used in separate incineration 城镇污水处理厂污泥处置 单独焚烧用泥质 |
China National Standards SL |
English PDF |
GB/T 24600-2009 |
Disposal of SLudge from municipal wastewater treatment plant - Quality of sludge used in land improvement 城镇污水处理厂污泥处置 土地改良用泥质 |
China National Standards SL |
English PDF |
GB/T 24645-2009 |
SLush seal performance of tractors - Test procedures 拖拉机防泥水密封性 试验方法 |
China National Standards SL |
English PDF |
GB/T 6624-2009 |
Standard method for measuring the surface quality of polished silicon SLices by visual inspection 硅抛光片表面质量目测检验方法 |
China National Standards SL |
English PDF |
GB/T 6621-2009 |
Testing methods for surface flatness of silicon SLices 硅片表面平整度测试方法 |
China National Standards SL |
English PDF |
GB/T 6620-2009 |
Test method for measuring warp on silicon SLices by noncontact scanning 硅片翘曲度非接触式测试方法 |
China National Standards SL |
English PDF |
GB/T 6618-2009 |
Test method for thickness and total thickness variation of silicon SLices 硅片厚度和总厚度变化测试方法 |
China National Standards SL |
English PDF |
GB/T 5238-2009 |
Monocrystalline germanium and monocrystalline germanium SLices 锗单晶和锗单晶片 |
China National Standards SL |
English PDF |
GB/T 13388-2009 |
Method for measuring crystallographic orientation of flats on single-crystal silicon SLices and wafers by X-ray techniques 硅片参考面结晶学取向X射线测试方法 |
China National Standards SL |
English PDF |
GB/T 11072-2009 |
Indium antimonide polycrystal,single crystals and as-cut SLices 锑化铟多晶、单晶及切割片 |
China National Standards SL |
English PDF |
GB/T 16762-2009 |
Wire rope SLings for general purposes-characteristics and technical requirements 一般用途钢丝绳吊索特性和技术条件 |
China National Standards SL |
English PDF |
GB/T 16271-2009 |
Steel wire ropes - Spliced eye termination for SLings 钢丝绳吊索 插编索扣 |
China National Standards SL |
English PDF |
GB/T 24444-2009 |
ElectroSLag remelting mould 电渣重熔结晶器 |
China National Standards SL |
English PDF |
GB/T 14737-2009 |
Specification for the operation of SLing used in the port for cargo handling 港口装卸用吊索使用技术条件 |
China National Standards SL |
English PDF |
GB 24188-2009 |
Quality of SLudge from municipal wastewater treatment plant 城镇污水处理厂污泥泥质 |
China National Standards SL |
English PDF |
GB/T 24184-2009 |
high calcium hot melt SLag after desulphurization for sintering flux 烧结熔剂用高钙脱硫渣 |
China National Standards SL |
English PDF |
GB/T 24175-2009 |
Test method for stability of steel SLag 钢渣稳定性试验方法 |
China National Standards SL |
English PDF |
GB/T 23933-2009 |
Mangnesium SLag portland cement 镁渣硅酸盐水泥 |
China National Standards SL |
English PDF |
GB/T 14643.3-2009 |
Examination of bacteria and algae in industrial circulating cooling water - Part 3: Examination of SLime formed fungi - Standard of plate count 工业循环冷却水中菌藻的测定方法 第3部分:粘泥真菌的测定 平皿计数法 |
China National Standards SL |
English PDF |
GB/T 23773-2009 |
Inorganic chemicals for industrial use - General method for determination of ammonium content - NesSLer’s reagent colorimetric method 无机化工产品中铵含量测定的通用方法 纳氏试剂比色法 |
China National Standards SL |
English PDF |
GB/T 23772-2009 |
Inorganic chemicals for industrial use - General method for the determination of total nitrogen content - NesSLer’s reagent colorimetric method 无机化工产品中总氮含量测定的通用方法 蒸馏-纳氏试剂比色法 |
China National Standards SL |
English PDF |
GB 50317-2009 |
Code for design of pig’s SLaughtering and cutting rooms 猪屠宰与分割车间设计规范 |
China National Standards SL |
English PDF |
GB/T 23722-2009 |
Cranes - Competency repuirements for crane drivers(operators), SLingers, signallers and assessors 起重机 司机(操作员)、吊装工、指挥人员和评审员的资格要求 |
China National Standards SL |
English PDF |
GB/T 23721-2009 |
Cranes - Training of SLingers and signallers 起重机 吊装工和指挥人员的培训 |
China National Standards SL |
English PDF |
GB/T 22862-2009 |
Sea-iSLand filament fabrics 海岛丝织物 |
China National Standards SL |
English PDF |
GB/T 23578-2009 |
Road construction and road maintenance machinery and equipment - SLipform pavers - Definitions and commercial specifications 道路施工与养护机械设备 滑模摊铺机 术语和商业规格 |
China National Standards SL |
English PDF |
GB/T 23486-2009 |
The disposal of SLudge from municipal wastewater treatment plant - The quality of sludge used in gardens or parks 城镇污水处理厂污泥处置 园林绿化用泥质 |
China National Standards SL |
English PDF |
GB/T 23485-2009 |
The disposal of SLudge from municipal wastewater treatment plant - Quality of sludge for co-landfilling 城镇污水处理厂污泥处置 混合填埋用泥质 |
China National Standards SL |
English PDF |
GB/T 23484-2009 |
The disposal of SLudge from municipal wastewater treatment plant - The classification 城镇污水处理厂污泥处置 分类 |
China National Standards SL |
English PDF |
GB 23525-2009 |
Safety technical criterion for personal board-type SLing equipment for suspending work 座板式单人吊具悬吊作业安全技术规范 |
China National Standards SL |
English PDF |
GB/T 23566.4-2009 |
SLiding guide steel-plate punch holders of stamping dies - Part 4: Four-pillar punch holders 冲模滑动导向钢板上模座 第4部分:四导柱上模座 |
China National Standards SL |
English PDF |
GB/T 23566.3-2009 |
SLiding guide steel-plate punch holders of stamping dies - Part 3: Center-pillar punch holders 冲模滑动导向钢板上模座 第3部分:中间导柱上模座 |
China National Standards SL |
English PDF |
GB/T 23566.2-2009 |
SLiding guide steel-plate punch holders of stamping dies - Part 2: Diagonal-pillar punch holders 冲模滑动导向钢板上模座 第2部分:对角导柱上模座 |
China National Standards SL |
English PDF |
GB/T 23566.1-2009 |
SLiding guide steel-plate punch holders of stamping dies - Part 1: Rear-pillar punch holders 冲模滑动导向钢板上模座 第1部分:后侧导柱上模座 |
China National Standards SL |
English PDF |
GB/T 23565.4-2009 |
SLiding guide steel-plate die sets of stamping dies - Part 4: Four-pillar die sets 冲模滑动导向钢板模架 第4部分:四导柱模架 |
China National Standards SL |
English PDF |
GB/T 23565.3-2009 |
SLiding guide steel-plate die sets of stamping dies - Part 3: Center-pillar die sets 冲模滑动导向钢板模架 第3部分:中间导柱模架 |
China National Standards SL |
English PDF |
GB/T 23565.2-2009 |
SLiding guide steel-plate die sets of stamping dies - Part 2: Diagonal-pillar die sets 冲模滑动导向钢板模架 第2部分:对角导柱模架 |
China National Standards SL |
English PDF |
GB/T 23565.1-2009 |
SLiding guide steel-plate die sets of stamping dies - Part 1: Rear-pillar die sets 冲模滑动导向钢板模架 第1部分:后侧导柱模架 |
China National Standards SL |
English PDF |
GB/T 23348-2009 |
SLow release fertilizer 缓释肥料 |
China National Standards SL |
English PDF |
GB/T 23453-2009 |
Natural limestone for building SLab 天然石灰石建筑板材 |
China National Standards SL |
English PDF |
GB/T 23452-2009 |
Natural sandstone for building SLab 天然砂岩建筑板材 |
China National Standards SL |
English PDF |
GB/T 18601-2009 |
Natural granite for building SLab 天然花岗石建筑板材 |
China National Standards SL |
English PDF |
GB/T 18600-2009 |
Natural SLate 天然板石 |
China National Standards SL |
English PDF |
GB 15762-2008 |
Autoclaved aerated concrete SLabs 蒸压加气混凝土板 |
China National Standards SL |
English PDF |
GB/T 13772.3-2008 |
Textiles - Determination of the SLippage resistance of yarns at a seam in woven fabrics - Part 3: Needle clamp method 纺织品 机织物接缝处纱线抗滑移的测定 第3部分:针夹法 |
China National Standards SL |
English PDF |
GB 22749-2008 |
Food processing machinery - SLicing machines - Safety and hygiene requirements 食品加工机械 切片机 安全和卫生要求 |
China National Standards SL |
English PDF |
GB/T 23158-2008 |
Safety requirements and test methods of SLeeping sack for babies and young children for import and export 进出口婴幼儿睡袋安全要求及测试方法 |
China National Standards SL |
English PDF |
GB/T 22755-2008 |
Brass fittings with press compression SLeeves for pipe system 卡压式铜管路连接件 |
China National Standards SL |
English PDF |
GB/T 22569-2008 |
The technical criterion of pig humane SLaughter 生猪人道屠宰技术规范 |
China National Standards SL |
English PDF |
Find out:591Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 |