GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 5564-2006 |
Rubber and plastics hoses - Subambient temperature flexibility Tests 橡胶及塑料软管 低温曲挠试验 |
China National Standards Test |
English PDF |
GB/T 3684-2006 |
Conveyor belts - Electrical conductivity - Specification and Test method 输送带 导电性 规范和试验方法 |
China National Standards Test |
English PDF |
GB/T 20781-2006 |
Solid fertilizers and soil conditioners - Test sieving 固体肥料和土壤调理剂 筛分试验 |
China National Standards Test |
English PDF |
GB/T 20778-2006 |
Evaluation of biodegradability of water treatment chemicals - Carbon dioxide evolution Test 水处理剂可生物降解性能评价方法 - CO2 生成量法 |
China National Standards Test |
English PDF |
GB/T 20777-2006 |
Paints and varnishes - Examination and prepration of samples for Testing 色漆和清漆 试样的检查和制备 |
China National Standards Test |
English PDF |
GB/T 13777-2006 |
Test method for maturity of cotton fibres - Microscopic method 棉纤维成熟度试验方法 显微镜法 |
China National Standards Test |
English PDF |
GB/T 12411-2006 |
Test methods for jute and kenaf fibres 黄、红麻纤维试验方法 |
China National Standards Test |
English PDF |
GB/T 8243.7-2006 |
Methods of Test for full-flow lubricating oil filters for internal combustion engines - Part 7: Vibration fatigue test 内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验 |
China National Standards Test |
English PDF |
GB/T 8190.6-2006 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and Test 往复式内燃机 排放测量 第6部分:测量结果和试验报告 |
China National Standards Test |
English PDF |
GB/T 20787-2006 |
Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet 往复式内燃机 中、高速往复式内燃机底脚结构噪声测试规范 |
China National Standards Test |
English PDF |
GB/T 10178-2006 |
Industrial fans-performance Testing in situ 工业通风机 现场性能试验 |
China National Standards Test |
English PDF |
GB/T 3579-2006 |
Cycle chains - Characteristics and Test methods 自行车链条 技术条件和试验方法 |
China National Standards Test |
English PDF |
GB/T 20737-2006 |
Non-destructive Testing - General terms and definitions 无损检测 通用术语和定义 |
China National Standards Test |
English PDF |
GB/T 20736-2006 |
Fatigue Test method for transmission precision roller chain 传动用精密滚子链条疲劳试验方法 |
China National Standards Test |
English PDF |
GB/T 12245-2006 |
Methods of performance Test for pressure reducing valves 减压阀 性能试验方法 |
China National Standards Test |
English PDF |
GB/T 20702-2006 |
Test method for extinguishing property of gaseous extinguishing agent 气体灭火剂灭火性能测试方法 |
China National Standards Test |
English PDF |
GB/T 5169.21-2006 |
Fire hazard Testing for electric and eletronic products - Part 21: Abnormal heat - Ball pressure test 电工电子产品着火危险试验 第21部分:非正常热 球压试验 |
China National Standards Test |
English PDF |
GB/T 5169.11-2006 |
Fire hazard Testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products 电工电子产品着火危险试验 第11部分:灼热丝/热丝基本试验方法 成品的灼热丝可燃性试验方法 |
China National Standards Test |
English PDF |
GB/T 5169.10-2006 |
Fire hazard Testing for electric and electronic products - Part 10: Glow/hot-wire based test methods - Glow-wire apparatus and common test procedure 电工电子产品着火危险试验 第10部分:灼热丝/热丝基本试验方法 灼热丝装置和通用试验方法 |
China National Standards Test |
English PDF |
GB/T 2424.7-2006 |
Environmental Tests for electric and electronic products - Measurements in temperature chambers for tests A and tests B (with load) 电工电子产品环境试验 试验A和B(带负载)用温度试验箱的测量 |
China National Standards Test |
English PDF |
GB/T 2424.6-2006 |
Environmental Testing for electric and electronic products - Confirmation of the performance of temperature/humidity chambers 电工电子产品环境试验 温度/湿度试验箱性能确认 |
China National Standards Test |
English PDF |
GB/T 2424.5-2006 |
Environmental Tests for electric and electronic products - Confirmation of the performance of temperature chambers 电工电子产品环境试验 温度试验箱性能确认 |
China National Standards Test |
English PDF |
GB/T 2423.37-2006 |
Environmental Testing for electric and electronic products - Part 2: Test methods - Test L:Dust and sand 电工电子产品环境试验 第2部分:试验方法 试验L:沙尘试验 |
China National Standards Test |
English PDF |
GB/T 2423.3-2006 |
Environmental Testing for electric and electronic products - Part 2: Testing method test Cab: Damp heat, Steady state 电工电子产品环境试验 第2部分:试验方法 试验Cab:恒定湿热试验 |
China National Standards Test |
English PDF |
GB/T 17626.3-2006 |
Electromagnetic compatibility - Testing and measurement techniques - Radiated,radio-frequency, electromagnetic field immunity test 电磁兼容 试验和测量技术 射频电磁场辐射抗扰度试验 |
China National Standards Test |
English PDF |
GB/T 17626.29-2006 |
Electromagnetic compatibility(EMC) - Testing and measurement techniques - Voltage dips,short interruptions and voltage variations on d.c. input power port immunity tests 电磁兼容 试验和测量技术 直流电源输入端口电压暂降、短时中断和电压变化的抗扰度试验 |
China National Standards Test |
English PDF |
GB/T 17626.2-2006 |
Electromagnetic compatibility(EMC) - Testing and measurement techniques - Electrostatic discharge immunity test 电磁兼容 试验和测量技术 静电放电抗扰度试验 |
China National Standards Test |
English PDF |
GB/T 5053.3-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions,Tests and requirements 道路车辆 牵引车与挂车之间电连接器 定义、试验方法和要求 |
China National Standards Test |
English PDF |
GB/T 5601-2006 |
Rules for inspecting and Testing of failway freight car after completion of construction 铁道货车检查与试验规则 |
China National Standards Test |
English PDF |
GB/T 2812-2006 |
Test method of safety helmet 安全帽测试方法 |
China National Standards Test |
English PDF |
GB/T 20654-2006 |
Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials 防护服装 机械性能 材料抗刺穿及动态撕裂性的试验方法 |
China National Standards Test |
English PDF |
GB/T 20671.9-2006 |
Classification system and Test methods for nonmetallic gasket materials - Part 9: Standard test method for binder durability of cork composition gasket materials 非金属垫片材料分类体系及试验方法 第9部分: 软木垫片材料胶结物耐久性试验方法 |
China National Standards Test |
English PDF |
GB/T 20671.8-2006 |
Classification system and Test methods for nonmetallic gasket materials - Part 8: Standard test method for flexibility of non-metallic gasket materials 非金属垫片材料分类体系及试验方法 第8部分: 非金属垫片材料柔软性试验方法 |
China National Standards Test |
English PDF |
GB/T 20671.7-2006 |
Classification system and Test methods for nonmetallic gasket materials - Part 7: Standard test methods for tension testing of nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第7部分: 非金属垫片材料拉伸强度试验方法 |
China National Standards Test |
English PDF |
GB/T 20671.6-2006 |
Classification system and Test methods for nonmetallic gasket materials - Part 6: Standard test method for adhesion of gasket materials to metal surfaces 非金属垫片材料分类体系及试验方法 第6部分: 垫片材料与金属表面粘附性试验方法 |
China National Standards Test |
English PDF |
GB/T 20671.5-2006 |
Classification system and Test methods for nonmetallic gasket materials - Part 5: Standard test method for creep relaxtion of gasket materials 非金属垫片材料分类体系及试验方法 第5部分:垫片材料蠕变松驰率试验方法 |
China National Standards Test |
English PDF |
GB/T 20671.4-2006 |
Classification system and Test methods for nonmetallic gasket materials - Part 4: Standard test method for sealability of gasket materials 非金属垫片材料分类体系及试验方法 第4部分:垫片材料密封性试验方法 |
China National Standards Test |
English PDF |
GB/T 20671.3-2006 |
Classification system and Test methods for nonmetallic gasket materials - Part 3: Standard test method for fluid resistance of gasket materials 非金属垫片材料分类体系及试验方法 第3部分: 垫片材料耐液性试验方法 |
China National Standards Test |
English PDF |
GB/T 20671.2-2006 |
Classification system and Test methods for nonmetallic gasket materials - Part 2: Standard test method for compressibility and recovery of gasket materials 非金属垫片材料分类体系及试验方法 第2部分: 垫片材料压缩率回弹率试验方法 |
China National Standards Test |
English PDF |
GB/T 20671.1-2006 |
Classification system and Test methods for nonmetallic gasket materials - Part 1: Standard classification system for nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第1部分: 非金属垫片材料分类体系 |
China National Standards Test |
English PDF |
GB/T 20671.11-2006 |
Classification system and Test methods for nonmetallic gasket materials - Part 11: Standard practice for determining resistance of synthetic polymeric materials to fungi 非金属垫片材料分类体系及试验方法 第11部分: 合成聚合材料抗霉性测定方法 |
China National Standards Test |
English PDF |
GB/T 20671.10-2006 |
Classification system and Test methods for nonmetallic gasket materials - Part 10: Standard practice for evaluating thermal conductivity of gasket materials 非金属垫片材料分类体系及试验方法 第10部分: 垫片材料导热系数测定方法 |
China National Standards Test |
English PDF |
GB/T 18488.2-2006 |
The electrical machines and controllers for electric vehicles - Part 2: Test methods 电动汽车用电机及其控制器 第2部分:试验方法 |
China National Standards Test |
English PDF |
GB/T 17626.8-2006 |
Electromagnetic compatibility(EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test 电磁兼容 试验和测量技术 工频磁场抗扰度试验 |
China National Standards Test |
English PDF |
GB/T 17626.28-2006 |
Electromagnetic compatibility(EMC) - Testing and measurement techniques - Variation of power frequency,immunity test 电磁兼容 试验和测量技术 工频频率变化抗扰度试验 |
China National Standards Test |
English PDF |
GB/T 17626.27-2006 |
Electromagnetic compatibility(EMC) - Testing and measurement techniques - Unbalance immunity test 电磁兼容 试验和测量技术 三相电压不平衡抗扰度试验 |
China National Standards Test |
English PDF |
GB/T 17626.13-2006 |
Electromagnetic compatibility(EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c.power port,low frequency immunity test 电磁兼容 试验和测量技术 交流电源端口谐波、谐间波及电网信号的低频抗扰度试验 |
China National Standards Test |
English PDF |
GB/T 17626.1-2006 |
Electromagnetic compatibility - Testing and measurement techniques - Overview of immunity tests 电磁兼容 试验和测量技术 抗扰度试验总论 |
China National Standards Test |
English PDF |
GB/T 20631.2-2006 |
Pressure sensitive adhesive tapes for electrical purposes - Part 2: Methods of Test 电气用压敏胶粘带 第2部分:试验方法 |
China National Standards Test |
English PDF |
GB/T 20630.2-2006 |
Specification for polyester fibre woven tapes - Part 2: Methods of Test 聚酯纤维机织带规范 第2部分:试验方法 |
China National Standards Test |
English PDF |
GB/T 20628.2-2006 |
Cellulosic papers for electrical purposes - Part 2: Methods of Test 电气用纤维素纸 第2部分:试验方法 |
China National Standards Test |
English PDF |
GB/T 20627.2-2006 |
Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of Test 玻璃及玻璃聚酯纤维机织带规范 第2部分:试验方法 |
China National Standards Test |
English PDF |
GB/T 20626.2-2006 |
Specific environmental condition - Electrical and electronic products for plateau - Part 2: Selective types and Testing specification 特殊环境条件 高原电工电子产品 第2部分:选型和检验规范 |
China National Standards Test |
English PDF |
GB/T 1408.2-2006 |
Electrical strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage 绝缘材料电气强度试验方法 第2部分:对应用直流电压试验的附加要求 |
China National Standards Test |
English PDF |
GB/T 1408.1-2006 |
Electrical strength of insulating materials - Test methods - Part 1: Tests at power frequencies 绝缘材料电气强度试验方法 第1部分:工频下试验 |
China National Standards Test |
English PDF |
GB/T 20642-2006 |
Impulse puncture Test in air on insulators for overhead lines 高压线路绝缘子空气中冲击击穿试验 |
China National Standards Test |
English PDF |
GB/T 2423.56-2006 |
Environmental Testing for electric and electronic products - Part 2: Test methods - Test Fh: Vibration、broad-band random(digital control) and guidance 电工电子产品环境试验 第2部分:试验方法 试验Fh:宽带随机振动(数字控制)和导则 |
China National Standards Test |
English PDF |
GB/T 20643.3-2006 |
Special environmental condition - Environmental Test method - Part 3: Artificial environmental test method and guidance - Polymer material 特殊环境条件 环境试验方法 第3部分:人工模拟试验方法及导则 高分子材料 |
China National Standards Test |
English PDF |
GB/T 20643.1-2006 |
Special environmental condition - Environmental Test method - Part 1: General and guidance 特殊环境条件 环境试验方法 第1部分:总则 |
China National Standards Test |
English PDF |
GB/T 20639-2006 |
Artificial pollution Testing of non-linear resistor type gapped arresters 有间隙阀式避雷器人工污秽试验 |
China National Standards Test |
English PDF |
GB/T 20637-2006 |
Electrical installations in ships - Shipboard power cables - General construction and Test requirements 船舶电气装置 船用电力电缆 一般结构和试验要求 |
China National Standards Test |
English PDF |
GB/T 10066.8-2006 |
Test methods for electroheat installations - Part 8: Electroslag remelting furnaces 电热装置的试验方法 第8部分:电渣重熔炉 |
China National Standards Test |
English PDF |
GB/T 10066.12-2006 |
Test methods for electroheat installations - Part 12: Infrared heating installations 电热装置的试验方法 第12部分:红外加热装置 |
China National Standards Test |
English PDF |
GB/T 20608-2006 |
Intelligent transportation systems - Adaptive cruise control systems -Performance requirements and Test procedures 智能运输系统 自适应巡航控制系统 性能要求与检测方法 |
China National Standards Test |
English PDF |
GB/T 225-2006 |
Steel - Hardenability Test by end quenching(Jominy test) 钢 淬透性的末端淬火试验方法(Jominy 试验) |
China National Standards Test |
English PDF |
GB/T 20568-2006 |
Metallic materials - Tube ring hydraulic pressure Test 金属材料 管环液压试验方法 |
China National Standards Test |
English PDF |
GB/T 12444-2006 |
Metallic materials - Wear Test method - Block-on-ring sliding wear test 金属材料 磨损试验方法 试环-试块滑动磨损试验 |
China National Standards Test |
English PDF |
GB/T 19042.5-2006 |
Evaluation and routine Testing in medical imaging departments - Part 3-5: Acceptance tests-Imaging performances of computed tomography X-ray equipment 医用成像部门的评价及例行试验 第3-5部分:X射线计算机体层摄影设备成像性能验收试验 |
China National Standards Test |
English PDF |
GB/T 6495.7-2006 |
Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the Testing of a photovoltaic device 光伏器件 第7部分:光伏器件测量过程中引起的光谱失配误差的计算 |
China National Standards Test |
English PDF |
GB/T 14282.3-2006 |
Instrument landing system (ILS) - Part 3: Performance requirements and Test methods for ILS localizer 仪表着陆系统(ILS)第3部分: 航向信标性能要求和测试方法 |
China National Standards Test |
English PDF |
GB/T 14282.1-2006 |
Instrument landing system (ILS) - Part 1: Performance requirements and Test methods of glide path beacon 仪表着陆系统(ILS) 第1部分:下滑信标性能要求和测试方法 |
China National Standards Test |
English PDF |
GB/T 1251.2-2006 |
Ergonomics - Visual danger signals - General requirements,design and Testing 人类工效学 险情视觉信号 一般要求、设计和检验 |
China National Standards Test |
English PDF |
GB/T 17911-2006 |
Refractory products - Methods of Test for ceramic fibre products 耐火材料 陶瓷纤维制品试验方法 |
China National Standards Test |
English PDF |
GB/T 8752-2006 |
Anodizing of aluminium and its alloys - Check of continuity of thin anodic oxide coating - Copper sulphate Test 铝及铝合金阳极氧化 薄阳极氧化膜连续性检验方法 硫酸铜法 |
China National Standards Test |
English PDF |
GB/T 5242-2006 |
Check rules and Test methods of cemented carbide products 硬质合金制品检验规则与试验方法 |
China National Standards Test |
English PDF |
GB/T 3251-2006 |
Compression Test method for aluminium and aluminium alloys tubes 铝及铝合金管材压缩试验方法 |
China National Standards Test |
English PDF |
GB/T 19995.3-2006 |
Technical requirements and Test methods for natural material sports field - Part 3: Ice rink 天然材料体育场地使用要求及检验方法 第3部分:运动冰场 |
China National Standards Test |
English PDF |
GB/T 12206-2006 |
Testing method to determine the calorific values of town gas 城镇燃气热值和相对密度测定方法 |
China National Standards Test |
English PDF |
GB/T 20490-2006 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic Testing for the detection of laminar imperfections 承压无缝和焊接(埋弧焊除外)钢管分层的超声检测 |
China National Standards Test |
English PDF |
GB/T 20488-2006 |
Test method of perforator materials for oil and gas well 油气井聚能射孔器材性能试验方法 |
China National Standards Test |
English PDF |
GB/T 5210-2006 |
Paints and varnishes - Pull-off Test for adhesion 色漆和清漆 拉开法附着力试验 |
China National Standards Test |
English PDF |
GB/T 2941-2006 |
Rubber - General procedures for preparing and conditioning Test pieces for physical test methods 橡胶物理试验方法试样制备和调节通用程序 |
China National Standards Test |
English PDF |
GB/T 20646-2006 |
Rubber compounding ingredients - p-Phenylenediamine(PPD) antioxidants - Test methods 橡胶配合剂 对苯二胺(PPD)防老剂试验方法 |
China National Standards Test |
English PDF |
GB/T 20624.2-2006 |
Paints and varnishes - Rapid-deformation(impact resistance) Tests - Part 2: Falling-weight test,small-area indenter 色漆和清漆 快速变形(耐冲击性)试验 第2部分:落锤试验(小面积冲头) |
China National Standards Test |
English PDF |
GB/T 20624.1-2006 |
Paints and varnishes - Rapid-deformation(impact resistance) Tests - Part 1: Falling-weight test,large-area inderter 色漆和清漆 快速变形(耐冲击性)试验 第1部分:落锤试验(大面积冲头) |
China National Standards Test |
English PDF |
GB/T 13490-2006 |
V-belts - Uniformity of belts - Test method for determination of centre distance variation V带 带的均匀性 测量中心距变化量的试验方法 |
China National Standards Test |
English PDF |
GB/T 12829-2006 |
Rubber, vulcanized or thermoplastic - Determination of tear strength of small Test pieces (Delft test pieces) 硫化橡胶或热塑性橡胶小试样(德尔夫特试样)撕裂强度的测定 |
China National Standards Test |
English PDF |
GB/T 12684-2006 |
Methods of Test for boron compound for industrial use 工业硼化物 分析方法 |
China National Standards Test |
English PDF |
GB/T 1040.4-2006 |
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites 塑料 拉伸性能的测定 第4部分:各向同性和正交各向异性纤维增强复合材料的试验条件 |
China National Standards Test |
English PDF |
GB/T 1040.3-2006 |
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets 塑料 拉伸性能的测定 第3部分:薄膜和薄片的试验条件 |
China National Standards Test |
English PDF |
GB/T 1040.2-2006 |
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics 塑料 拉伸性能的测定 第2部分:模塑和挤塑塑料的试验条件 |
China National Standards Test |
English PDF |
GB 15083-2006 |
Strength requirement and Test of automobile seats, their anchorages and any head restraints 汽车座椅、座椅固定装置及头枕强度要求和试验方法 |
China National Standards Test |
English PDF |
GB/T 4937.2-2006 |
Semiconductor devices―Mechanical and climatic Test methods―Part 2: Low air pressure 半导体器件 机械和气候试验方法 第2部分:低气压 |
China National Standards Test |
English PDF |
GB/T 4937.1-2006 |
Semiconductor devices―Mechanical and climatic Test methods―Part 1: General 半导体器件 机械和气候试验方法 第1部分: 总则 |
China National Standards Test |
English PDF |
GB/T 20494.1-2006 |
Micrographics - Quality control of COM recorders that generate images using a single internal display - Part 1: Characteristics of the Test target 缩微摄影技术 使用单一内显示系统生成影像的COM记录器的质量控制 第1部分:软件测试标板的特性 |
China National Standards Test |
English PDF |
GB/T 20493.2-2006 |
Electronic imaging - Test target for the black-and-white scanning of office documents - Part 2: Method of use 电子成像 办公文件黑白扫描用测试标板 第2部分:使用方法 |
China National Standards Test |
English PDF |
GB/T 20493.1-2006 |
Electronic imaging - Test target for the black-and-white scanning of office documents - Part 1: Characteristics 电子成像 办公文件黑白扫描用测试标板 第1部分:特性 |
China National Standards Test |
English PDF |
GB/T 3318-2006 |
Test methods for electric locomotives on completion of construction and before entry into service 电力机车制成后投入使用前的试验方法 |
China National Standards Test |
English PDF |
GB/T 3315-2006 |
Test methods for diesel locomotives on completion of construction and before entry into service 内燃机车制成后投入使用前的试验方法 |
China National Standards Test |
English PDF |
GB/T 15818-2006 |
Test method for biodegradability of surfactants 表面活性剂生物降解度试验方法 |
China National Standards Test |
English PDF |
Find out:8212Items | To Page of: First -Previous-Next -Last | [62] [63] [64] [65] [66] [67] [68] |