| Standard Code |
Standard Title |
Standard Class |
Order |
|
GB 15892-2020 |
Polyaluminium chloride for treatment of drinking Water |
Water
China GB-National
Standards |
 |
|
GB 28234-2020 |
Hygienic requirements for acidic electrolyzed Water generator |
Water
China GB-National
Standards |
|
|
GB/T 22830-2020 |
Watercolor painting paper |
Water
China GB-National
Standards |
|
|
GB/T 24328.6-2020 |
Tissue paper and tissue products—Part 6: Determination of Water-absorption time and water-absorption capacity—Basket-immersion test method |
Water
China GB-National
Standards |
|
|
GB/T 26206-2020 |
Injecting Water foot massager |
Water
China GB-National
Standards |
|
|
GB/T 38924.9-2020 |
Environmental test methods for civil small and light unmanned aircraft system—Part 9: Waterproofness test |
Water
China GB-National
Standards |
|
|
GB/T 38990-2020 |
Waterborne epoxylite emulsified binder mixture for road engineering |
Water
China GB-National
Standards |
|
|
GB/T 38966-2020 |
Assessment requirements for Water stewardship |
Water
China GB-National
Standards |
|
|
GB/T 38907-2020 |
Water saving enterprises—Polysilicon industry |
Water
China GB-National
Standards |
|
|
GB/T 38906-2020 |
Low impact development stormWater management and harvest—Facility classification |
Water
China GB-National
Standards |
|
|
GB/T 38802-2020 |
Management specification for Water-saving of swimming places |
Water
China GB-National
Standards |
|
|
GB/T 25127.1-2020 |
Low ambient temperature air source heat pump （Water chilling）packages—Part 1：Heat pump （water chilling）packages for industrial & commercial and similar application |
Water
China GB-National
Standards |
|
|
GB/T 25127.2-2020 |
Low ambient temperature air source heat pump （Water chilling）packages—Part 2：Heat pump （water chilling）packages for household and similar application |
Water
China GB-National
Standards |
|
|
GB/T 38734-2020 |
Technical requirements and test methods for household and similar heat pump Water heaters with CO2 as refrigerants |
Water
China GB-National
Standards |
|
|
GB/T 23137-2020 |
Heat pump Water heater for household and similar application |
Water
China GB-National
Standards |
|
|
GB/T 38657-2020 |
Specifications for low pressure feed Water heater for conventional island in nuclear power station |
Water
China GB-National
Standards |
|
|
GB/T 38653-2020 |
Specifications for high pressure feed Water heater for conventional island in nuclear power station |
Water
China GB-National
Standards |
|
|
GB/T 38602-2020 |
Test method of catalytic activity for catalytic wet oxidation of organic wasteWater |
Water
China GB-National
Standards |
|
|
GB/T 38596-2020 |
Determination method of heavy metal contents in the wasteWater during catalyst production |
Water
China GB-National
Standards |
|
|
GB/T 38594-2020 |
Water supply devices with superimposing pipe pressure |
Water
China GB-National
Standards |
|
|
GB/T 25895.3-2020 |
Water safety signs and beach safety flags—Part 3: Guidance for use |
Water
China GB-National
Standards |
|
|
GB/T 25895.2-2020 |
Water safety signs and beach safety flags—Part 2: Specifications for beach safety flags colour,shape,meaning and performance |
Water
China GB-National
Standards |
|
|
GB/T 23127-2020 |
Electric appliances connected to the Water mains—Avoidance of backsiphonage and failure of hose-sets |
Water
China GB-National
Standards |
|
|
GB/T 18920-2020 |
The reuse of urban recycling Water—Water quality standard for urban miscellaneous use |
Water
China GB-National
Standards |
|
|
GB/T 18916.50-2020 |
Norm of Water intake—Part 50：Polyester product |
Water
China GB-National
Standards |
|
|
GB/T 18916.49-2020 |
Norm of Water intake—Part 49：Polyamide product |
Water
China GB-National
Standards |
|
|
GB/T 18916.48-2020 |
Norm of Water intake—Part 48：Polyvinyl product |
Water
China GB-National
Standards |
|
|
GB/T 18916.47-2020 |
Norm of Water intake—Part 47: Polysilicon production |
Water
China GB-National
Standards |
|
|
GB 50015-2019 |
Standard for design of building Water supply and drainage |
Water
China JG - Building Industry
Standards |
|
|
GB/T 23762-2020 |
Test method for Water purification performance of photocatalytic materials |
Water
China GB-National
Standards |
|
|
GB/T 9966.3-2020 |
Test methods for natural stone--Part 3: Determination of Water absorption, bulk density, true density and true porosity |
Water
China GB-National
Standards |
|
|
GB/T 38536-2020 |
Technical specification for the equipment of hot Water heating substation |
Water
China GB-National
Standards |
|
|
GB/T 38458-2020 |
Automatic rinsing-filling-capping monobloc for packaged (barreled) drinking Water—General technical specification |
Water
China JB-Machinery Industry
Standards |
|
|
GB/T 38269-2019 |
Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean Water salt-deposition process—Dry and wet conditions at constant absolute humidity |
Water
China National
Standards |
|
|
GB/T 19837-2019 |
Ultraviolet (UV) disinfection equipment for urban Water and wastewater engineering |
Water
China National
Standards |
|
|
GB/T 15227-2019 |
Test method of air permeability, Watertightness, wind load resistance performance for curtain walls |
Water
China National
Standards |
|
|
GB/T 13295-2019 |
Ductile iron pipes,fitting and accessories for Water or gas applications |
Water
China National
Standards |
|
|
GB/T 7106-2019 |
Test methods of air permeability,Watertightness,wind load resistance performance for building external windows and doors |
Water
China National
Standards |
|
|
GB 38448-2019 |
Minimum allowable values and grades of the energy efficiency and Water efficiency for smart water closets |
Water
China National
Standards |
|
|
GB 30717-2019 |
Minimum allowable values of Water efficiency and water efficiency grades for squatting pans |
Water
China National
Standards |
|
|
GB 28378-2019 |
Minimum allowable values of Water efficiency and water efficiency grades for showers |
Water
China National
Standards |
|
|
GB 28377-2019 |
Minimum allowable values of Water efficiency and water efficiency grades for urinals |
Water
China National
Standards |
|
|
GB 25501-2019 |
Minimum allowable values of Water efficiency and water efficiency grades for faucets |
Water
China National
Standards |
|
|
GB/T 38350-2019 |
Residential gas-fired heating and hot Water appliances with auxiliary energy |
Water
China National
Standards |
|
|
GB/T 16702-2019 |
Design code for mechanical components in nuclear island of pressurized Water reactor nuclear power plants |
Water
China National
Standards |
|
|
GB/T 38269-2019 |
Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean Water salt-deposition process—Dry and wet conditions at constant absolute humidity |
Water
China National
Standards |
|
|
GB/T 19837-2019 |
Ultraviolet (UV) disinfection equipment for urban Water and wastewater engineering |
Water
China National
Standards |
|
|
GB/T 15227-2019 |
Test method of air permeability, Watertightness, wind load resistance performance for curtain walls |
Water
China National
Standards |
|
|
GB/T 13295-2019 |
Ductile iron pipes,fitting and accessories for Water or gas applications |
Water
China National
Standards |
|
|
GB/T 7106-2019 |
Test methods of air permeability,Watertightness,wind load resistance performance for building external windows and doors |
Water
China National
Standards |
|
|
GB 38383-2019 |
The minimum allowable values of the energy，Water consumption and grades for dishwashers |
Water
China National
Standards |
|
|
GB 13851-2019 |
Traffic safety signs on inland Waterways |
Water
China National
Standards |
|
|
GB/T 51347-2019 |
Technical standard for domestic wasteWater treatment engineering of rural area |
Water
China GB-National
Standards |
|
|
GB 13851-2019 |
Traffic safety signs on inland Waterways |
Water
China National
Standards |
|
|
GB/T 37990-2019 |
Technical requirements of anti-washout admixture for underWater concrete |
Water
China National
Standards |
|
|
GB/T 37907-2019 |
Reclaimed Water quality—Determination of sulfide and cyanide—Ion chromatography |
Water
China National
Standards |
|
|
GB/T 37906-2019 |
Reclaimed Water quality—Determination of mercury—Mercury analyzer method |
Water
China National
Standards |
|
|
GB/T 37905-2019 |
Reclaimed Water quality—Determination of chromium—Voltammetry and polarography |
Water
China National
Standards |
|
|
GB/T 37894-2019 |
Technical requirements for ozone generator for Water and wastewater treatment |
Water
China National
Standards |
|
|
GB/T 37892-2019 |
Digital integrated full frequency conversion controlled constant pressure Water supply equipment |
Water
China National
Standards |
|
|
GB/T 37883-2019 |
Determination of chromium, cadmium, lead and arsenic in Water treatment chemicals—Inductively coupled plasma atomic emission spectrometry |
Water
China National
Standards |
|
|
GB/T 37832-2019 |
Water saving enterprises—Textile industry of chemical filament yarns weaving |
Water
China National
Standards |
|
|
GB/T 37813-2019 |
Management specifications for Water conservation on public institutions |
Water
China National
Standards |
|
|
GB/T 25104-2019 |
Automatic measurement of Water content in crude oil—RF method |
Water
China National
Standards |
|
|
GB/T 19812.5-2019 |
Plastic equipment for Water saving irrigation—Part 5：Sub-surface drip irrigation pipe |
Water
China National
Standards |
|
|
GB/T 18916.44-2019 |
Norm of Water intake—Part 44 ：Spandex product |
Water
China National
Standards |
|
|
GB/T 17633-2019 |
Geotextiles and geotextile-related products－Determination of Water flow capacity in their plane |
Water
China National
Standards |
|
|
GB/T 16641-2019 |
Footwear—Test methods for whole shoe—Dynamic Waterproofness |
Water
China National
Standards |
|
|
GB/T 16632-2019 |
Determination of scale inhibition performance of Water treatment chemicals—Calcium carbonate precipitation method |
Water
China National
Standards |
|
|
GB/T 15456-2019 |
Determination of the chemical oxygen demand in industrial circulating cooling Water—Permanganate index method |
Water
China National
Standards |
|
|
GB/T 15329-2019 |
Rubber hoses and hose assemblies—Textile-reinforced hydraulic types for oil-based or Water-based fluids—Specification |
Water
China National
Standards |
|
|
GB/T 13477.14-2019 |
Test method for building sealants－Part 14：Determination of resistance to prolonged exposure to Water
|
Water
China National
Standards |
|
|
GB/T 5714-2019 |
Textiles—Tests for colour fastness—Colour fastness to sea Water |
Water
China National
Standards |
|
|
GB/T 3903.33-2019 |
Footwear—Test methods for insoles and insocks—Water absorption and desorption |
Water
China National
Standards |
|
|
GB/T 37764-2019 |
Technical guidelines for the treatment and reuse of acid mine Water |
Water
China National
Standards |
|
|
GB/T 37759-2019 |
Water saving enterprises—Modern coal chemical industry |
Water
China National
Standards |
|
|
GB/T 37758-2019 |
Technical guidelines for the treatment and reuse of mine Water with high TDS |
Water
China National
Standards |
|
|
GB/T 37756-2019 |
Guideline of Water footprint assessment and reporting for product |
Water
China National
Standards |
|
|
GB/T 37574-2019 |
Methods of investigation and assesment for Water resources environment investigation in mining subsidence area |
Water
China National
Standards |
|
|
GB/T 37565-2019 |
General specification of screen machine for Water supply and drainage service |
Water
China National
Standards |
|
|
GB/T 37563-2019 |
Safety requirements for pressurized Water electrolysis system for hydrogen production |
Water
China National
Standards |
|
|
GB/T 37562-2019 |
Technical conditions of pressurized Water electrolysis system for hydrogen production |
Water
China National
Standards |
|
|
GB/T 37551-2019 |
Marine energy—Terminology of wave, tidal and other Water current converters |
Water
China National
Standards |
|
|
GB/T 21327-2019 |
Evaporator of Water surface |
Water
China National
Standards |
|
|
GB/T 18921-2019 |
The reuse of urban recycling Water—Water quality standard for scenic environment use |
Water
China National
Standards |
|
|
GB/T 18916.42-2019 |
：Norm of Water intake—Part 42: Huangjiu production |
Water
China National
Standards |
|
|
GB/T 18916.39-2019 |
Norm of Water intake—Part 39: Coal to synthetic natural gas |
Water
China National
Standards |
|
|
GB/T 37475-2019 |
Dimensional series and operating equipments for inland Waterway cleaning boat |
Water
China National
Standards |
|
|
GB 37485-2019 |
Minimum allowable values of energy efficiency and energy efficiency grades for submersible mixers of wasteWater |
Water
China National
Standards |
|
|
GB 37483-2019 |
Minimum allowable values of energy efficiency and energy efficiency grades for rotary aerator in wasteWater treatment |
Water
China National
Standards |
|
|
GB 37480-2019 |
Minimum allowable values of energy efficiency and energy efficiency grades for low ambient temperature air source heat pumps（Water chiller） packages |
Water
China National
Standards |
|
|
GB/T 37332-2019 |
Water saving enterprises—Shipbuilding industry |
Water
China National
Standards |
|
|
GB/T 37328-2019 |
Ships and marine technology—Vessel machinery operations in polar Waters—Guidelines |
Water
China National
Standards |
|
|
GB/T 18916.41-2019 |
Norm of Water intake—Part 41：Yeast production |
Water
China National
Standards |
|
|
GB/T 13893.2-2019 |
Paints and varnishes—Determination of resistance to humidity—Part 2: Condensation(in-cabinet exposure with heated Water reservoir) |
Water
China National
Standards |
|
|
GB/T 37191-2018 |
Raw rubber—Determination of Water content—Karl Fischer method |
Water
China National
Standards |
|
|
GB/T 37210-2018 |
Nuclear radiation-resistant inflatable and Water-filled rubber sealing products |
Water
China National
Standards |
|
|
GB/T 36938-2018 |
Textile machinery and accessories—Strips for Water jet solidification |
Water
China National
Standards |
|
|
GB/T 37063-2018 |
FreshWater cultured pearl mussels and classification of pearls |
Water
China National
Standards |
|
|
GB 8537-2018 |
National Food Safety Standard - Drinking Natural Mineral Water |
Water
China National
Standards |
|
|
GB/T 51297-2018 |
Soil and Water Conservation Engineering Survey and Survey Standards |
Water
China National
Standards |
|
|
GB/T 50434-2018 |
Soil and Water loss prevention and control standards for production and construction projects |
Water
China National
Standards |
|
|
GB/T 51240-2018 |
Soil and Water conservation monitoring and evaluation standards for production and construction projects |
Water
China National
Standards |
|
|
GB/T 37271-2018 |
Water saving enterprises—Chlor alkali industry |
Water
China National
Standards |
|
|
GB/T 36895-2018 |
Water saving enterprises—Nitrogenous fertilizer industry |
Water
China National
Standards |
|
|
GB/T 51332-2018 |
Technical standard for wasteWater treatment facilities containing nitrobenzene compounds |
Water
China National
Standards |
|
|
GB/T 51293-2018 |
Technical standard for urban rail transit Water supply and drainage system |
Water
China National
Standards |
|
|
GB 3552-2018 |
Ship Water pollutant emission control standard |
Water
China National
Standards |
|
|
GB 50433-2018 |
Technical standards for soil and Water conservation in production and construction projects |
Water
China National
Standards |
|
|
GB 50364-2018 |
Technical standards for application of solar Water heating systems for civil buildings |
Water
China National
Standards |
|
|
GB/T 19812.4-2018 |
Plastic equipment for Water saving irrigation—Part 4：Polyethylene (PE) flexible pipe |
Water
China National
Standards |
|
|
GB/T 18916.40-2018 |
Norm of Water intake—Part 40: Shipbuilding |
Water
China National
Standards |
|
|
GB 19304-2018 |
National Food Safety Standard - Hygienic Standard for Packaging Drinking Water Production |
Water
China National
Standards |
|
|
GB/T 7119-2018 |
Evaluating guide for Water saving enterprises |
Water
China National
Standards |
|
|
GB 50336-2018 |
Water design standard in buildings |
Water
China National
Standards |
|
|
GB 50013-2018 |
Outdoor Water supply design standard |
Water
China National
Standards |
|
|
GB/T 26136-2018 |
Ultra-high pressure Waterjet cutting machine |
Water
China National
Standards |
|
|
GB/T 50363-2018 |
Technical specification for Water-saving irrigation engineering |
Water
China National
Standards |
|
|
GB/T 18840-2018 |
Inlay for bituminous Waterproof sheets |
Water
China National
Standards |
|
|
GB/T 32063-2015/XG1-2018 |
Customer service for public of urban Water supply |
Water
China National
Standards |
|
|
GB/T 778.2-2018 |
Meters for cold potable Water and hot water—Part 2: Test methods |
Water
China National
Standards |
|
|
GB/T 778.5-2018 |
Meters for cold potable Water and hot water—Part 5: Installation requirements |
Water
China National
Standards |
|
|
GB/T 778.1-2018 |
Meters for cold potable Water and hot water—Part 1:Metrological requirements and technical requirements |
Water
China National
Standards |
|
|
GB/T 778.3-2018 |
Meters for cold potable Water and hot water—Part 3：Test report format |
Water
China National
Standards |
|
|
GB/T 778.4-2018 |
Meters for cold potable Water and hot water—Part 4：Non-metrological requirements not covered in GB/T 778.1 |
Water
China National
Standards |
|
|
GB/T 1576-2018 |
Water quality for industrial boilers |
Water
China National
Standards |
|
|
GB/T 16811-2018 |
Running results and monitoring of industrial boilers Water-treatment equipment |
Water
China National
Standards |
|
|
GB/T 35015-2018 |
Calibration method for calibrated cylinder used in Water jacket hydrostatic test |
Water
China National
Standards |
|
|
GB/T 35051-2018 |
Grade for closed process Water circuit in coal preparation plant |
Water
China National
Standards |
|
|
GB/T 36122-2018 |
Maintenance and management of municipal fire Water supply facilities |
Water
China National
Standards |
|
|
GB/T 18916.33-2018 |
Norm of Water intake—Part 33: Indirect coal liquefaction |
Water
China National
Standards |
|
|
GB/T 18916.36-2018 |
Norm of Water intake—Part 36: Ethylene glycol produced with coal as raw material |
Water
China National
Standards |
|
|
GB/T 18916.37-2018 |
Norm of Water intake—Part 37: Phosphoric acid by wet process |
Water
China National
Standards |
|
|
GB/T 18916.34-2018 |
Norm of Water intake—Part 34: Direct coal liquefaction |
Water
China National
Standards |
|
|
GB/T 18916.38-2018 |
Norm of Water intake—Part 38: Polyvinyl chloride |
Water
China National
Standards |
|
|
GB/T 18916.35-2018 |
Norm of Water intake—Part 35: Methyl alcohol produced by coal |
Water
China National
Standards |
|
|
GB/T 35059-2018 |
Determination on reabsorbed Water of upgraded coal |
Water
China National
Standards |
|
|
GB/T 36243-2018 |
Input/output protocols and electronic interfaces for Water meters—Requirements |
Water
China National
Standards |
|
|
GB/T 36536-2018 |
Test method of Water balance in cement production enterprises |
Water
China National
Standards |
|
|
GB/T 15453-2018 |
Determination of chloride in Water for industrial circulating cooling system and boiler |
Water
China National
Standards |
|
|
GB/T 36540-2018 |
VIS-SWIR spectral reflectivity measurement of Water |
Water
China National
Standards |
|
|
GB/T 36303-2018 |
Print digital Watermark |
Water
China National
Standards |
|
|
GB/T 22594-2018 |
Water treatment chemicals—General rules for determination of density |
Water
China National
Standards |
|
|
GB/T 6909-2018 |
Analysis of Water used in boiler and cooling system—Determination of hardness |
Water
China National
Standards |
|
|
GB/T 6908-2018 |
Analysis of Water used in boiler and cooling system—Determination of electrical conductivity |
Water
China National
Standards |
|
|
GB 5135.7-2018 |
Automatic sprinkler systems—Part 7: Water flow indicators |
Water
China National
Standards |
|
|
GB/T 36523-2018 |
Compound quick intake and exhaust air valve for Water supply pipeline |
Water
China National
Standards |
|
|
GB/T 36511-2018 |
UnderWater emergency breathing apparatus for helicopter |
Water
China National
Standards |
|
|
GB 16154-2018 |
General technical specification for civil Water heating coal stove |
Water
China National
Standards |
|
|
GB/T 36258-2018 |
Grounds-service connections of aircraft potable Water，toilet-flush water and toilet drain |
Water
China National
Standards |
|
|
GB/T 36256-2018 |
Requirements for Water rescue equipment of large amphibian aircraft |
Water
China National
Standards |
|
|
GB/T 19743-2018 |
Water-atomized pure iron powder and alloyed steel powder for powder metallurgy |
Water
China National
Standards |
|
|
GB/T 36855-2018 |
Quarantine protocols for Watermelon seeds in producing areas |
Water
China National
Standards |
|
|
GB/T 27896-2018 |
Test method for Water vapor content of natural gas—Electronic moisture analyzers |
Water
China National
Standards |
|
|
GB/T 36882-2018 |
Marine Water-source heat pumps air conditioning unit |
Water
China National
Standards |
|
|
GB/T 36666-2018 |
Guidelines for underWater ship cleaning |
Water
China National
Standards |
|
|
GB/T 36575-2018 |
Principles and requirements for Water classified using and water recycling in industrial park |
Water
China National
Standards |
|
|
GB/T 35940-2018 |
SeaWater cultured pearl oysters and classification of pearls |
Water
China National
Standards |
|
|
GB/T 16155-2018 |
Test method for performance of civil Water heating coal stove |
Water
China National
Standards |
|
|
GB/T 35937-2018 |
Household and similar drinking Water purifier performance test method |
Water
China National
Standards |
|
|
GB 14035-2018 |
Lifesaving appliances for inland Waterway ships—Bed-type,pillow-type and cushion-type |
Water
China National
Standards |
|
|
GB/T 16140-2018 |
Determination of radionuclides in Water by gamma spectrometry |
Water
China National
Standards |
|
|
GB/T 35925-2018 |
Determination of impurity fluorine ion in Water soluble chemicals—Ion chromatography method |
Water
China National
Standards |
|
|
GB/T 17737.203-2018 |
Coaxial communication cables—Part 1-203: Environmental test methods—Test for Water penetration of cable |
Water
China National
Standards |
|
|
GB/T 13663.3-2018 |
Polyethylene(PE)piping systems for Water supply—Part 3: Fittings |
Water
China National
Standards |
|
|
GB/T 13663.5-2018 |
Polyethylene (PE) piping systems for Water supply—Part 5: Fitness for purpose of the system |
Water
China National
Standards |
|
|
GB/T 13663.2-2018 |
Polyethylene(PE) piping systems for Water supply—Part2: Pipes |
Water
China National
Standards |
|
|
GB/T 11048-2018 |
Textiles－Physiological effects－Measurement of thermal and Water-vapour resistance under steady-state conditions(sweating guarded-hotplate test) |
Water
China National
Standards |
|
|
GB/T 4482-2018 |
Water treatment chemicals—Ferric chloride |
Water
China National
Standards |
|
|
GB/T 36060-2018 |
Process control and testing methods on the Water-based adhesives using in hardcover book binding production |
Water
China National
Standards |
|
|
GB/T 36041-2018 |
Monitoring criteria for variable important to safety in nuclear power plants for pressurized Water reactors |
Water
China National
Standards |
|
|
GB/T 35606-2017 |
Green product assessment—Solar Water heating system |
Water
China National
Standards |
|
|
GB/T 35609-2017 |
Green product assessment—Waterproof matreials and sealants |
Water
China National
Standards |
|
|
GB/T 35523-2017 |
Chemicals—Aerobic mineralisation in surface Water—Simulation biodegradation test |
Water
China National
Standards |
|
|
GB/T 13663.1-2017 |
Polyethylene(PE) piping systems for Water supply—Part 1: General |
Water
China National
Standards |
|
|
GB/T 35577-2017 |
Terminology of Water-saving products for buildings |
Water
China National
Standards |
|
|
GB 12263-2017 |
Cardiopulmonary bypass systems—Water heating/cooling system |
Water
China National
Standards |
|
|
GB/T 35214-2017 |
Standard method for determining fixation times of inorganic Waterborne wood preservatives |
Water
China National
Standards |
|
|
GB/T 35576-2017 |
Water saving enterprises—Beer brewing industry |
Water
China National
Standards |
|
|
GB/T 35670-2017 |
Pymetrozine Water dispersible granules |
Water
China National
Standards |
|
|
GB/T 35401-2017 |
Mobile laboratory general specification for detection of groundWater |
Water
China National
Standards |
|
|
GB/T 12000-2017 |
Plastics—Determination of the effects of exposure to damp heat,Water spray and salt mist |
Water
China National
Standards |
|
|
GB/T 23457-2017 |
Pre-applied Waterproofing sheets |
Water
China National
Standards |
|
|
GB/T 35190-2017 |
Determination of 131I in sea Water—β counting method |
Water
China National
Standards |
|
|
GB/T 34500.5-2017 |
Chemical analysis methods for rare earth residue and waste Water—Part 5：Determination of ammonia nitrogen content |
Water
China National
Standards |
|
|
GB/T 35573-2017 |
Calculation method of atmospheric Water vapor resource |
Water
China National
Standards |
|
|
GB/T 35468-2017 |
Waterproofing sheets of resistance to root penetration for green roof |
Water
China National
Standards |
|
|
GB/T 35355-2017 |
Determination of Water-soluble salts for marine equipment—Sodium chloride standard method |
Water
China National
Standards |
|
|
GB/T 18168-2017 |
Specifications of Water amusement equipment category |
Water
China National
Standards |
|
|
GB/T 35467-2017 |
Wet installed Waterproofing sheets |
Water
China National
Standards |
|
|
GB/T 26398-2017 |
Evaluation guide of detergence,Water costing and saving for laundry detergents—Simulated household washing test method |
Water
China National
Standards |
|
|
GB/T 35370-2017 |
Testing methods for self-contained underWater breathing apparatus(SCUBA) |
Water
China National
Standards |
|
|
GB/T 35348-2017 |
Diesel engines—Fuel filters—Method for evaluating fuel/Water separation efficiency |
Water
China National
Standards |
|
|
GB/T 35570-2017 |
Determination of tritium activity concentration in sea Water—Low-background liquid scintillation spectrometry method |
Water
China National
Standards |
|
|
GB/T 35730-2017 |
General design requirements of pressurized Water reactor nuclear power plants with passive safety systems |
Water
China National
Standards |
|
|
GB/T 19249-2017 |
Reverse osmosis Water treatment equipment |
Water
China National
Standards |
|
|
GB/T 35580-2017 |
Guidelines for Water-draw and utilization assessment on construction projects |
Water
China National
Standards |
|
|
GB/T 35160.1-2017 |
Test methods for agglomerated stone—Part 1：Determination of apparent density and Water absorption |
Water
China National
Standards |
|
|
GB/T 15146.12-2017 |
Nuclear criticality safety for fissile materials outside reactors—Part 12: Burnup credit for low Water reactor( LWR) fuel |
Water
China National
Standards |
|
|
GB/T 15345-2017 |
Test methods of concrete pipes for Water transmission |
Water
China National
Standards |
|
|
GB/T 5742-2017 |
Filling connection for drinking Water tanks on ships |
Water
China National
Standards |
|
|
GB/T 33961-2017 |
Technical specification for wasteWater treatment of coking |
Water
China National
Standards |
|
|
GB/T 13477.15-2017 |
Test method for building sealants—Part 15：Determination of adhesion/cohesion properties after exposure to heat and artificial light through glass and to Water |
Water
China National
Standards |
|
|
GB/T 33840-2017 |
General technical requirement for Water jacket furnace |
Water
China National
Standards |
|
|
GB/T 34005-2017 |
Determination of Water vapour transmission properties of preformed pipe insulation |
Water
China National
Standards |
|
|
GB/T 18033-2017 |
Seamless copper tubes for Water and gas |
Water
China National
Standards |
|
|
GB/T 20686-2017 |
Glyphosate Water soluble powders(granules) |
Water
China National
Standards |
|
|
GB/T 33859-2017 |
Environmental management—Water footprint—Principles, requirements and guidelines |
Water
China National
Standards |
|
|
GB/T 33815-2017 |
Technical specification for wasteWater treatment of iron ore mining and mineral processing enterprises |
Water
China National
Standards |
|
|
GB/T 13477.9-2017 |
Test method for building sealants—Part 9：Determination of adhesion/cohesion properties after immersion in Water |
Water
China National
Standards |
|
|
GB/T 33832-2017 |
Determination of Water resistance of glass fiber |
Water
China National
Standards |
|
|
SY/T 6569-2017 |
(Oil and Gas Field Production System Economic Operation Standard Water Injection System) |
Water
China Oil & Gas Industry
Standards |
|
|
SYJ 6-1989 |
(Oily wasteWater treatment design specifications (including the provisions stated)) |
Water
China Oil & Gas Industry
Standards |
|
|
SYJ 5-1989 |
(Oilfield Jing Water design specifications (with the provisions stated)) |
Water
China Oil & Gas Industry
Standards |
|
|
SYJ 46-1991 |
(Oilfield Water injection vacuum deoxy design specifications) |
Water
China Oil & Gas Industry
Standards |
|
|
SYJ 4019-1987 |
(Oilfield Water jacket furnace manufacture, installation and acceptance) |
Water
China Oil & Gas Industry
Standards |
|
|
SYJ 26-1987 |
(Water Corrosion Test Methods) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 7552-2005 |
Crude petroleum--Determination of Water--Potentiometric Karl Fischer titration method |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 7507-2016 |
(Determination of Water content in natural gas - Electrolysis method) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 7507-1997 |
Determination of Water in natural gas. Electrolytic method |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 7341-2016 |
(Selection of UnderWater Leak Detection System and Recommended Practice) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 7339-2016 |
(UnderWater welding specification) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 7337-2016 |
(Technical specification for Water - based drilling fluid treatment and maintenance of sulfide oil and gas wells) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 7330-2016 |
(Offshore oil underWater harness connector) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 7061-2016 |
(UnderWater High Integrity Pressure Protection System (HIPPS) Recommended Practice) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 7055-2016 |
(UnderWater separator design Recommended Practices) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 7052-2016 |
(Man beach sea Water and well site construction construction specifications) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 7022-2014 |
Code for design of oil and gastransmission pipeline crossing by pipe jacking in Water areas |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 7020-2014 |
Code for design of oilfield injection produced Water advanced treatment for low and special low permeability reservoir |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 7017-2014 |
Oil and gas industry downhole tools - Oil in Water from the expansion packer |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6989-2014 |
Operation method for snubbing workover for oil and Water well |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6899-2012 |
Determination of the Water dew point of natural gas. The capactitance method |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6886-2012 |
Code for design of oil field treatment polymer. bearing and high corrosive produced Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6881-2012 |
Design code for Water treatment and reinjection engineering in highly hydrogen sulfide gas field |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6852-2012 |
Code for design of oilfield produced Water biological treatment |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6849-2012 |
Design code of structures for the road of allow over Water and the well field in beach-shallow sea |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6838-2011 |
Calculation method of energy and Water saved for oil-gas field enterprise |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6811-2016 |
(Calibration Method for Core Oil - Water Saturation Distillation) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6811-2010 |
Calibration method of core oil-Water saturation meter |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6787-2010 |
Technical requirements of environmental protection for Water-soluble oilfield chemicals |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6768-2009 |
Compiling guides for energy and Water-saving section of feasibility sttudy and base design in oil and gas field surface facility construction projects |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6722-2016 |
Statistical index and calculation methods for energy consumption and Water usage of petroleum enterprise |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6722-2008 |
Statistical index and calculation methods for energy consumption and Water usage of petroleum enterprise |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6721-2008 |
The method of Water balance test and calculation for oilfield production system |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6596-2016 |
(Technical Requirements for Gas Field Water Injection) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6596-2004 |
Recommended practice for produced-Water reinjection in gas field |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6569-2010 |
The economical operation specification for Water injection system of oil field |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6569-2003 |
Economical operation for Water injection system of oil field |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6565-2003 |
Technique requirements for CO2 injection in petroleum or Water well safety |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6557-2011 |
Guidelians for application of Water spray systems for fire protection in the petroleum industry |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6557-2003 |
Guidelines for application of Water spray systems for fire protection in the petroleum industry |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6536-2012 |
Specification for cathodic protection of internal submerged surfaces of steel Water storage tanks |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6536-2002 |
Specification of cathodic protection of internal submerged surfaces of steel Water storage tanks |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6525-2002 |
Recommended practice for Water drainage and gas production by foaming method |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6486-2000 |
Recommended opertional method for preventing of clay-swelling and fine-migration in acidizing of Water injection well |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6452-2000 |
Core oil/Water relative permeameter |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6392-2012 |
The specification for names of data in the oil field Water injection management |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6392-1999 |
Information code of oil field Water injection |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6369-1998 |
Core oil. Water saturation measuring apparatus |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6361-1998 |
Oil and gas production, Water injection lease-Health, safety and environmental management systems guideline |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6343-1998 |
Training of personnel in rescue of persons in Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6334-2013 |
Acidizing designment, treatment and evaluation for production well and Water injection well |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6334-1997 |
Standards to acidizing design and treatment evaluation for oil well and Water well |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6313.2-1998 |
The method of determining the oil-gas-Water contact. The gas-water contact |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6313.1-1998 |
The method of determining the oil-gas-Water contact. The oil-gas and oil-water contact |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6301-1997 |
General technical specification of corrosion inhibiter for produced Water of oil field |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6269-2010 |
Common terms of energy and Water conservation in petroleum enterprise |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6269-2004 |
Common terms of energy and Water conservation in petroleum enterprises |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6264-2006 |
Specifications of major repair project design for oil, gas, Water well |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6202-2013 |
Requirement for installation of oil, Water, power and heating systems at wellsite |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6202-1996 |
(Wellsite drilling of oil, Water and heating system installation technical requirements) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6178-2011 |
Specification for Water flooded zone well logging data processing and interpreting |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6178-2000 |
Specification for Water flooded zone well logging data processing and interpreting |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6140-1995 |
(Oilfield Water treatment scale inhibitor essence procurement rules) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6127-2006 |
Specification of data collection items for downhole operation in oil, gas, Water wells |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6124-2010 |
Practice for Water drainage and gas production by gas lift technology |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6118-2013 |
The technical specifications for Water processing system operation of thermal recovery steam generator |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6118-1995 |
(Technical specification for running thermal recovery steam generator Water treatment system) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6020-1994 |
(Geological logging of oil and gas exploration well in line with the rate of the Water layer interpretation of statistical methods) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6007-1994 |
(Oil field Water treatment with fungicides essence procurement rules) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5982-1994 |
(Determination of metal elements in oil and gas fields in Water by atomic absorption spectrometry) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5971-2016 |
The performance evaluation method of clay stabilizer for fracturing, acidizing and Water injection in oil and gas fields |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5969-2005 |
Comprehensive interpretation specification of geo-logging for oil, gas and Water layer of oil and gas exploration well |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5952-2005 |
Legend of downhole process strings and tools for hydrocarbon production well and Water injection well |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5925-2012 |
Method for selecting chemical tracers used in Water injection |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5924-2011 |
The operation method for Water shut off producer. Water shut off operation by the mechanic method for open hole |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5924-1993 |
(Water-repellent work methods. Openhole mechanical shutoff card operations) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5923-2012 |
Operation method of Water plugging in production well. Process technologies of water plugging and profile control with sodium silicate and calcium chloride |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5923-1993 |
(Water glass water-repellent operating methods - calcium chloride and water shutoff profile control technology practice) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5906-2012 |
The method for plotting chart on pressure-loss curve through Water nozzle |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5906-2003 |
The method for plotting chart on pressure-loss curve through choke of Water injection well |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5906-1993 |
(Water distribution Zuizui loss curve plate production methods) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5874-2012 |
Evaluation method on oil well Water plugging |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5874-2003 |
Evaluation method on oil well Water plugging |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5874-1993 |
(Water-repellent effect evaluation method) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5851-1993 |
(Sandstone oilfield Water injection technology to be developed to adjust the programming technique) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5843-1997 |
Gas-Water relative permeability measurement |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5821-2012 |
Water shutoff technology with organic plugging agent for carbonate reservoir |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5821-1993 |
(Carbonate reservoir Water shutoff technology practice organic blocking agent) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5797-1993 |
(Water-in-oil emulsion demulsifier performance evaluation method) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5757-2010 |
General specifications of bactericides for oilfield injecting Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5757-1995 |
(Oilfield Water injection fungicide general technical conditions) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5753-2016 |
The performance evaluation method of surfactants for oil well acidizing and Water well stimulation |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5733-2016 |
(Water Injection Well Completion and Layered Water Injection Test and Distribution Method) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5733-2009 |
Procedures of stratified flow rate testing and adjusting on injection wells with eccentric Water tube |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5733-1995 |
(Injection wells eccentric Water column stratification test deployment procedures) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5716.6-1995 |
(Oil rig overhaul technical conditions. Water brakes) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5594-1993 |
(Waterflood oil sands development planning methods) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5588-2012 |
Profile modification technology and result evaluation in Water well |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5588-2003 |
Profile modification technology and result evaluation in Water injection well |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5587.1-1993 |
(Conventional oil wells, repair and operations. Water and deploy operating procedures) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5580-2007 |
Technical managing rules of the demulsifier for crude oil and the treatment chemicals for produced Water in oilfield |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5566-2011 |
The crude oil Water-cut analyzer with a low energy source |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5566-1998 |
The crude oil Water-cut analyzer with a low energy source |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5565-1993 |
(Watered electronic meter) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5558-1992 |
(Water hole sand washing operation procedures) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5523-2016 |
Method for analysis of oilfiled Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5523-2006 |
Practice for analysis of oilfield Waters |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5523-2000 |
Analysis for oil and gas field Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5429-2000 |
Small diameter flowrate and Watercut logging tool |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5402-2016 |
Determination of Water content in crude oil. Electric dehydration method |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5402-2008 |
Crude petroleum determination of Water. Electric dehydration method |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5402-1991 |
(Oil and Water content determination electrical stripping) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5372-1991 |
(Stratified Water injection method of operation) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5362-2010 |
The technical specifications for oil, gas and Water flow rate simulation testing equipment in production logging |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5362-1995 |
(Oil production logging Water flow simulation test device) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5345-1999 |
Oil-Water relative permeability measurement |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5329-2012 |
Water quality standard and practice for analysis of oilfield injecting waters in clastic reservoirs |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5329-1994 |
(Clastic reservoir Water quality of the recommended indicators and analysis methods) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5277-2000 |
Classification and coding method for Water shutoff agents used in oil field |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5275-2014 |
Distributor for Water-injection |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5275.3-2012 |
Filling with Water dispenser water dispenser hoard -set |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5275.3-1994 |
(Filling with Water distribution. Prescriptive water distribution) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5275.2-2007 |
The Water segregator for water injection in oil field. Air-core movable water segregator |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5275.2-1993 |
(Filling with Water distribution hollow active water distribution) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5273-2014 |
Technical specifications and evaluating methods of corrosion-inhibitors for oilfield produced Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5273-2000 |
Evaluation method for behaviour of corrosion inhibitor for produced Water of oilfield |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5270-2000 |
Technical regulation of design for high pressure Water injection fittings |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5265-1996 |
Method for efficiency testing and unit energy consumption calculation of oilfield Water-injection surface system |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5243-1991 |
(Water-based drilling fluid viscosity reducer evaluation program) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5241-1991 |
(Water-based drilling fluid loss additive with evaluation procedures) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5237-1991 |
(Water and hydrogen isotope analysis method zinc reduction sealed tube method) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5185-2016 |
Evaluation methods of Water-based carrying fluid for gravel packing sand control |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5185-2008 |
Evaluation methods of Water-based carrying fluid for gravel packing sand control |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5185-1987 |
(Gravel pack sand carrying Water-based fluid performance evaluation recommended method) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5184-1997 |
Quartz sand for sand control in oil, gas wells and Water injection wells |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5107-2016 |
(Evaluation Method of Water - based Fracturing Fluid Performance) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5107-2005 |
Recommended practices on measuring the properties of Water-based fracturing fluid |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 5107-1995 |
(Water-based fracturing fluid performance evaluation method) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 4122-2012 |
Code for construction of oilfield Water injection |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 4088-1995 |
Technical specification of Water supply and sewerage for petroleum engineering in beach-shallow sea |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 4084-2010 |
Technical specification for environmental conditions and loads in shallow Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 4035-1993 |
Standard for quality inspection and evaluation of petroleum construction engineering Heating ventilating, Water supply and sewerage engineering |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 4011-1993 |
Code for construction and acceptance of Water injection pump |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 10006-2000 |
Specification for Wellhead Surface Safety Valves and UnderWater Safety Valves for Offshore Service |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0610-2008 |
Standard for underground Water enclosed cavern investigation of geotechnical engineering |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0601-2016 |
(Determination of emulsified oil and dissolved oil in Water) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0601-2009 |
Determination of emulsified oil and soluble oil in Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0601-1997 |
Determination of emulsified oil and oil-soluble in Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0600-2009 |
Prediction of scaling tendency in oil-field Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0600-1997 |
Predication of scaling tendency in oil-field Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0532-2012 |
Analysis method of the bacteria for oilfield injecting Water. Disappearing dilution method |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0532-1993 |
(Oilfield Water injection bacterial analysis. Extinct dilution) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0531-1994 |
(Injected Water particles suspended assay. Resistance induction method) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0530-2011 |
Determination of oil content in oilfield produced Water. Spectrophotometry method |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0530-1993 |
(Oilfield wasteWater Determination of oil content. Spectrophotometry) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0526.16-1993 |
(Coal tar enamel coating. Wrap. Water resistance test) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0526.10-1993 |
(Coal tar enamel coating. Enamel. Water absorption) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0523-2008 |
Oilfield Water treatment filter |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0523-1993 |
(Oilfield Water Filters) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0309-1996 |
Technical specification of produced Water treatment for petroleum engineering in beach-shallow sea |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0308-2016 |
(Beach sea Water petroleum engineering design specifications) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0308-1996 |
Technical specification of Water in jcction for petroleum engineering in beach-shallow sea |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0097-2016 |
Code for design of oilfield produced Water used as steam generator feed water after treatment |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0097-2000 |
Design specification for heavy oil field produced Water treatment as steam generator feedwater |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0089-2006 |
Code for design of Water and wastewater for oil/gas plant, station and depot |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0089-1996 |
Code for design of Water and wastewater for oil-gas plant, station and depot |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0064-2000 |
Standard test method for Water penetration into pipeline coatings |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0046-1999 |
Design specification for deoxidation of injected Water in oilfield |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0026-1999 |
Test method for corrosively of Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0006-1999 |
Code for design of oil field produced Water treatment |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 0005-1999 |
Code for design of oilfield Water injection |
Water
China Oil & Gas Industry
Standards |
|
|
SY 7507-1987 |
(Natural gas - Determination of Water electrolysis) |
Water
China Oil & Gas Industry
Standards |
|
|
SY 6505-2000 |
The provisions for outside surface color of shallow Water facilities |
Water
China Oil & Gas Industry
Standards |
|
|
SY 6504-2000 |
The safety provisions for hydrogen sulfide environment in shallow Water petroleum operations |
Water
China Oil & Gas Industry
Standards |
|
|
SY 6502-2010 |
The safety management rules for escape and lifesaving aooliance in shallow Water and shoal petroleum installations |
Water
China Oil & Gas Industry
Standards |
|
|
SY 6502-2000 |
The safety management rules for escape with onelife and lifesaving appliance in shallow Water petroleum operator |
Water
China Oil & Gas Industry
Standards |
|
|
SY 6500-2000 |
The survey provisions on petroleum facilities in shallow Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY 6432-2010 |
Well control specification for petroleum operations in shallow Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY 6307-2016 |
The drilling safety provisions in the beach-shallow Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY 6307-2008 |
The drilling safety provisions in the beach-shallow Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY 6307-1997 |
The drilling safety provisions in the beach-shallow Water |
Water
China Oil & Gas Industry
Standards |
|
|
SY 5747-2008 |
Safety rules for steel fixed platform in shallow Water and shoal |
Water
China Oil & Gas Industry
Standards |
|
|
SY 5329-1988 |
(Clastic reservoir Water quality of the recommended indicators and analysis methods) |
Water
China Oil & Gas Industry
Standards |
|
|
SY 5312.6-1987 |
(Oil and gas exploration wells database encoding oil, gas, Water level code) |
Water
China Oil & Gas Industry
Standards |
|
|
SY 5275-1991 |
(Eccentric Water Tools) |
Water
China Oil & Gas Industry
Standards |
|
|
SY 5273-1991 |
(Oil field Water corrosion evaluation methods) |
Water
China Oil & Gas Industry
Standards |
|
|
SY 5265-1991 |
(Oilfield ground Water system efficiency test method) |
Water
China Oil & Gas Industry
Standards |
|
|
SY/T 6788-2010 |
Evaluation procedures of environmental protection for Water-soluble oilfield chemicals |
Water
China Oil & Gas Industry
Standards |
|
|
QC/T 979-2014 |
Waterproof vent device for protecting automotive electrical and electronics equipment |
Water
China Automobile & Vehicle industry
Standards |
|
|
QC/T 832-2010 |
Vehicle exhaust gas-operated Water heating radiator |
Water
China Automobile & Vehicle industry
Standards |
|
|
QC/T 821-2009 |
Engine cold-Water and oil temperature sensor for automobile |
Water
China Automobile & Vehicle industry
Standards |
|
|
QC/T 780-2007 |
Water radiatormed in motorcycles |
Water
China Automobile & Vehicle industry
Standards |
|
|
QC/T 634-2007 |
Vehicle Water-heating air heater mechanism |
Water
China Automobile & Vehicle industry
Standards |
|
|
QC/T 472-1999 |
Motor vehicles. Brake linings resistance to Water, saline solution, oil and brake fluid. Test procedure |
Water
China Automobile & Vehicle industry
Standards |
|
|
QC/T 468-1999 |
Specification for Water cooled engine radiator |
Water
China Automobile & Vehicle industry
Standards |
|
|
QC/T 288-1999 |
(Automobile Water pump assembly quality grading) |
Water
China Automobile & Vehicle industry
Standards |
|
|
QC/T 288.2-2001 |
Automotive engine cooling Water pump test methods |
Water
China Automobile & Vehicle industry
Standards |
|
|
QC/T 288.1-2001 |
Automotive engine cooling Water pump conditions |
Water
China Automobile & Vehicle industry
Standards |
|
|
SHJ 16-1990 |
(Petrochemical enterprises circulating Water design specifications) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 3535-2012 |
Specification for construction and acceptance of concrete Water pit engineering in petrochemical industry |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 3535-2002 |
Specification for the construction and acceptance of concrete Water pit engineering for petrochemical industry |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 3533-2013 |
Specification for construction and acceptance of Water and sewerage pipeline in petrochemical industry |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 3124-2001 |
Legend of Water supply and drainage process flow in petrochemical industry |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 3123-2001 |
Petrochemical monitoring code for controlled Water test to preload steel storage tanks subgrade |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 3094-2013 |
Design specification for rainWater ditch in petrochemical industry |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 1770-2010 |
Plastics. Determination of Water content for polyethylene |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 1758-2007 |
Polyethylene (PE) materials for Water supply piping systems |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 1750-2005 |
Propylene random copolymer (PP-R) materials for piping systems for hot and cold Water installations |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 1612.4-1995 |
(Terephthalic acid for industrial use refined determination of Water content by Karl Fischer volumetric method) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 1146-1992 |
Ethyl benzene for industrial use. Determination of pH in Water exetace |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 1144-1992 |
(Determination of trace amounts of Water in the cleavage of carbon four industrial (Karl Fischer method)) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 1055-1991 |
(Determination of the Water content of diethylene glycol industrial (Microcoulometric titration)) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0791-2007 |
Standard test method for measuring the effect on filterability of engine oils after treatment with various amounts of Water and a long(6-h) heating time |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0781-2005 |
Test method for miscibility with Water of emulsified asphalt |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0772-2005 |
Standard test method for measuring the effect on filterability of engine oils after treatment with Water and dry ice and a short heating time |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0752-2005 |
Determination of the corrosion resistance of Water-containing fire-resistant hydraulic fluids |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0709-2001 |
Standard test method for evaluating detergency and general performance of Water-cooled two-stroke gasoline engine oil (Mercury 15HP) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0708-2001 |
Standard test method for evaluating detergency and general performance of Water-cooled two-stroke gasoline engine oil (OMC 70HP) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0697-2000 |
Compatibility test of Water-cooling two-stroke-cycle gasoline engine oil |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0676-2005 |
Water-cooled two-stroke-cycle gasoline engine oils |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0676-1999 |
TC-W II Water-cooling two-stroke-cycle gasoline engine oil |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0670-1998 |
Standard test method for determination of lubricity of Water-cooled two-stroke gasoline engine oils |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0648-1997 |
Lubricants test method for evaluating detergence and general performance of Water-cooled two-stroke gasoline engine |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0647-1997 |
Lubricants test method for evaluating preignition tendency of Water-cooled two-stroke gasoline engine |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0643-1997 |
Lubrication greases. Determination of resistance to Water spray |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0634-1996 |
(Water-cooled two-stroke gasoline engine oil filter clogging tendency assay) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0633-1996 |
(Water-cooled two-stroke gasoline engine oil rust assay) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0619-1995 |
(Marine oil and Water separation assays) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0616-1995 |
(Jet fuel Water separator index assay (portable instrument separation method)) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0602-1994 |
(L-RA Water displacement rust oil) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0569-1993 |
(Water-in-oil emulsion stability assay (low - temperature cycling method)) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0568-1993 |
(Water-in-oil emulsion storage stability assay (oven method)) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0453-1992 |
(Grease resistance to Water and water - ethanol (1: 1) solution performance test method) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0407-1992 |
(Petroleum wax Water-soluble acid or base Test Method) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0298-1992 |
(Rust lubricant containing Water-soluble acid assay (pH value method)) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0295-1992 |
Methods of measurement for the volatile and Water-soluble acid in the early stage of transformer oil oxidation |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0257-1992 |
(Lubricants Water qualitative test method) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0255-1992 |
(Lubricants and additives - Determination of Water content (power law)) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0246-1992 |
(Light petroleum products - Determination of Water (power law)) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0109-2004 |
Petroleum products and lubricants. Determination of Water washout characteristics of lubricating greases |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0109-1992 |
(Determination of Water washout performance grease) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0099.15-2005 |
Determination of Water content in asphalt emulsions by distillation |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0099.10-2005 |
Test method for coating ability and Water resistance of emulsified asphalt |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0086-1991 |
(Engine coolant concentrate Determination of Water (Karl Fischer method)) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0064-1991 |
(Distillate fuel free Water and particulate pollutants test method) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0036-1990 |
(Antirust Water displacement test method) |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0025-1999 |
Rust preventive oils. Test method of salt Water immersion |
Water
China Petrochemical Industry
Standards |
|
|
SH/T 0002-1990 |
(Waterproof asphalt) |
Water
China Petrochemical Industry
Standards |
|
|
SH 3533-2003 |
Specification for the construction and acceptance of piping works for Watersupply and drainage in petrochemical industry |
Water
China Petrochemical Industry
Standards |
|
|
SH 3533-1995 |
Specification for construction and acceptance of piping works for Watersupply and drainage in petrochemical engineering |
Water
China Petrochemical Industry
Standards |
|
|
SH 3173-2013 |
Design specification for wasteWater reclamation and reutilization in petrochemical industry |
Water
China Petrochemical Industry
Standards |
|
|
SH 3099-2000 |
Water quality standard of water supply and drainage in petrochemical industry |
Water
China Petrochemical Industry
Standards |
|
|
SH 3095-2000 |
Design code for wasteWater treatment in petrochemical industry |
Water
China Petrochemical Industry
Standards |
|
|
SH 3089-1998 |
Design legend of Water supply and drainage piping for petrochemical industry |
Water
China Petrochemical Industry
Standards |
|
|
SH 3034-2012 |
Specification for design of Water supply and wastewater piping in petrochemical industry |
Water
China Petrochemical Industry
Standards |
|
|
SH 3034-1999 |
Code for the piping design of Watersupply and drainage in petrochemical industry |
Water
China Petrochemical Industry
Standards |
|
|
SH 3016-1990 |
(Petrochemical enterprises circulating Water design specifications) |
Water
China Petrochemical Industry
Standards |
|
|
SH 3015-2003 |
Code of design for Water and wastewater in petrochemical engineering |
Water
China Petrochemical Industry
Standards |
|
|
SH 2604.13-2003 |
Water treatment chemicals. Stabilized chlorine dioxide |
Water
China Petrochemical Industry
Standards |
|
|
SH 2604.11-2003 |
Water treatment chemicals. 2-Phosphonobutane-1, 2, 4-tricarboxylic acid |
Water
China Petrochemical Industry
Standards |
|
|
SH 2604.10-2003 |
Water treatment chemicals. Polymers containing AMPS |
Water
China Petrochemical Industry
Standards |
|
|
SH 2604.09-2003 |
Water treatment chemicals. Isothiazolone derivative |
Water
China Petrochemical Industry
Standards |
|
|
SH 2604.08-2003 |
Water treatment chemicals. Dodecyl (tetradecyl) dimethyl benzyl ammonium chloride |
Water
China Petrochemical Industry
Standards |
|
|
SH 2604.07-2003 |
Water treatment chemicals. Complex scale corrosion inhibitor |
Water
China Petrochemical Industry
Standards |
|
|
SH 2604.06-2003 |
Water treatment chemicals. Acrylic acid-acrylate series copolymer |
Water
China Petrochemical Industry
Standards |
|
|
SH 2604.05-2003 |
Water treatment chemicals. Polymaleic acid |
Water
China Petrochemical Industry
Standards |
|
|
SH 2604.04-2003 |
Water treatment chemicals. Polyacrylic acid/sodium polyacrylate |
Water
China Petrochemical Industry
Standards |
|
|
SH 2604.03-2003 |
Water treatment chemicals. Sodium Hexametaphosphate |
Water
China Petrochemical Industry
Standards |
|
|
SH 2604.02-2003 |
Water treatment chemicals. Sodium (ethylenedinitrilo) -tetramethylenephosphate |
Water
China Petrochemical Industry
Standards |
|
|
SH 2604.01-2003 |
Water treatment chemicals. Hydroxyethylidenediphosphonic acid |
Water
China Petrochemical Industry
Standards |
|
|
FZ/T 94054-2009 |
Water jet looms |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 94011.3-2013 |
Reeds. Part 3: Reeds for Water-jet looms |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 93081-2012 |
Recycle Water treatment equipment for spun-laced machine |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 92080-2012 |
Rotation Water filters for textile |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 64053-2015 |
Polyving alcohol Water-soluble staple fiber nonwovens |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 64036-2013 |
Sodium bentonite Water resistant geosynthetic clay liner |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 50036-2016 |
Polyvinyl alcohol fiber--Test method for reduced quantity in hot Water |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 50031-2015 |
Test mothod for moisture content and saturated Water absorption of carbon fiber |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 43012-1999 |
Water repellency treated polyamide filament fabric |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 24012-2010 |
Water-repellent, oil-repellent and stain resistant cashmere knitting goods |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 20030-2015 |
Determination of wool fabric propersity to curling. Spray Water method |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 20029-2015 |
Determination of wool fabric propersity to bubbling. Spray Water method |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 20009-2015 |
Determination of the dimensional changes of wool fabrics. Water immersion |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 20009-2006 |
Determination of the dimensional changes of wool fabrics. Water immersion |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 14023-2012 |
Water-proof and moisture permeable polyester (polyamide) fabrics |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 14021-2011 |
Printed and dyed fabrics with Water-proof, oil repellency, soil release and easy-care functions |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 14009-2014 |
Water-proof dyed vinylon canvas for awning |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 14009-2005 |
Water-proof canvas made of dyed vinylon for awning |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 14009-1999 |
(Canopy covered with Waterproof canvas stained Villeneuve) |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 12047-2014 |
Cotton/Water soluble PVA fiber grey yarn |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 10019-2011 |
Testing method for polyacrylic sizes used in textile warp sizing. Determination of Water absorption rate of sizing film |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 01107-2011 |
Reusing Water for textile dyeing and finishing |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 01105-2010 |
Calculation method of Water usage in knitted goods wet processing and unit consumption quota |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 01104-2010 |
Calculation method of Water usage in woven fabrics wet processing and unit consumption quota |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 01038-1994 |
(Permeability test methods textile Waterproof rain) |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 01004-2008 |
Coated fabrics. Determination of resistance to penetration by Water |
Water
China Textile & Garment industry
Standards |
|
|
FZ/T 01004-1991 |
(Coated fabrics resistance to Water test method (hydrostatic testing)) |
Water
China Textile & Garment industry
Standards |
|
|
NB/T 42117-2017 |
(Technical condition of biomass Water - cooled vibrating grate boiler) |
Water
China Energy industry
Standards |
|
|
NB/T 34051-2017 |
(Cultivation Techniques of Sweet Sorghum in Salt Water) |
Water
China Energy industry
Standards |
|
|
NB/T 34050-2017 |
(Commercial or industrial and similar use air source heat pump hot Water machine year comprehensive energy efficiency test method) |
Water
China Energy industry
Standards |
|
|
NB/T 34049-2017 |
(Code for construction, supervision and acceptance of solar hot Water works) |
Water
China Energy industry
Standards |
|
|
NB/T 34047-2017 |
(Code for installation of separate air source heat pump Water heater) |
Water
China Energy industry
Standards |
|
|
NB/T 34046-2017 |
(Technical specification for solar thermal Water system for household use) |
Water
China Energy industry
Standards |
|
|
NB/T 34043-2017 |
(Solar hot Water engineering stainless steel atmospheric pressure storage tank) |
Water
China Energy industry
Standards |
|
|
NB/T 20471-2017 |
(Design criteria for plant Water system for non - dynamic pressurized water reactor nuclear power plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20463-2017 |
(Dropping of spent fuel in pressurized Water reactors and classification of dry storage facilities) |
Water
China Energy industry
Standards |
|
|
NB/T 20462-2017 |
(Thermal analysis of dry storage facilities for spent fuel in pressurized Water reactor) |
Water
China Energy industry
Standards |
|
|
NB/T 20461-2017 |
(Code for design of dry storage facilities for spent fuel in pressurized Water reactors) |
Water
China Energy industry
Standards |
|
|
NB/T 20459-2017 |
(Technical Specification for Heading Grouting at Steel Bottom Seal of Steel Safety Shell in Non - dynamic Pressure Water Reactor Nuclear Power Plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20458-2017 |
(Provisions on cleanliness management of Jian An stage of pressurized Water reactor nuclear power plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20457-2017 |
(Manufacture and Quality Acceptance of Steel Safety Shell Parts for Non - dynamic Pressure Water Reactor Nuclear Power Plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20453-2017 |
(Technical specification for installation of main coolant pipe for non - dynamic pressure Water reactor nuclear power plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20450.4-2017 |
(Pressurized Water reactor nuclear power plant nuclear island machinery and equipment welding another specification Part 4: product welding and heat treatment) |
Water
China Energy industry
Standards |
|
|
NB/T 20450.2-2017 |
(Pressurized Water reactor nuclear power plant nuclear island machinery and equipment welding another specification part 2: welding materials) |
Water
China Energy industry
Standards |
|
|
NB/T 20450.1-2017 |
(Pressurized Water reactor nuclear power plant nuclear island machinery and equipment welding another specification Part 1: general requirements) |
Water
China Energy industry
Standards |
|
|
NB/T 20439-2017 |
(Code for pressure - temperature limit curve of reactor pressure vessel in pressurized Water reactor nuclear power plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20438-2017 |
(Code for Construction of Roof Structure of Shielded Powerhouse in Non - dynamic Pressure Water Reactor Nuclear Power Plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20436-2017 |
(Water Chemical Control of PWR Nuclear Power Plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20430-2017 |
(Technical Specification for Installation of Reactor Heap Structure in Non - dynamic Pressure Water Heater Nuclear Power Plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20007.8-2017 |
(Stainless steel for pressurized Water reactor nuclear power plants - Part 8: 1, 2, 3 grade austenitic stainless steel seamless steel tubes) |
Water
China Energy industry
Standards |
|
|
NB/T 20005.12-2017 |
(Carbon and low alloy steels for PWR nuclear power plants - Part 12: Main steam systems, main feedWater flow control systems, auxiliary water supply systems and seamless steel tubes for steam turbine bypass systems) |
Water
China Energy industry
Standards |
|
|
NB/T 35095-2017 |
(Hydrological Calculation Code for Small Watershed of Hydropower Project) |
Water
China Energy industry
Standards |
|
|
NB/T 35094-2017 |
(Code for calculation of Water temperature for hydropower projects) |
Water
China Energy industry
Standards |
|
|
NB/T 35093-2017 |
(Code for calculation of backWater for reservoir of hydropower project) |
Water
China Energy industry
Standards |
|
|
NB/T 25074-2017 |
(Technical Requirements for Concrete Spiral Case Circulating Water Pump Impeller in Nuclear Power Plant) |
Water
China Energy industry
Standards |
|
|
NB/T 25069-2017 |
(Technical requirements for inverters of conventional islands and auxiliary facilities for pressurized Water reactor nuclear power plants) |
Water
China Energy industry
Standards |
|
|
NB/T 25068-2017 |
(Technical conditions for hydrogen - oil - Water system of generator in nuclear power plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20425-2017 |
(Development Method of Water Buried Probability Safety Evaluation in Nuclear Power Plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20416-2017 |
(Design and manufacture of nuclear - grade metal bellows expansion joint for pressurized Water reactor nuclear power plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20412-2017 |
(Technical specification for assembly and acceptance of structural modules for pressurized Water reactor nuclear power plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20407-2017 |
(Code for design and manufacture of components in pressurized Water reactor reactor) |
Water
China Energy industry
Standards |
|
|
NB/T 20406-2017 |
(Enclosure isolation device for fluid system of pressurized Water reactor nuclear power plant) |
Water
China Energy industry
Standards |
|
|
NB/T 20008.29-2017 |
(Other materials for pressurized Water reactor nuclear power plants - Part 29: NS3105 alloy sheet and strip for safety equipment) |
Water
China Energy industry
Standards |
|
|
NB/T 20007.45-2017 |
(Stainless steel for pressurized Water reactor nuclear power plants - Part 45: Compressed elastic rings with 04Cr13Ni5Mo martensitic stainless steel forgings) |
Water
China Energy industry
Standards |
|
|
NB/T 20006.38-2017 |
(Hydraulic steel alloys for pressurized Water reactors - Part 38: 19MnNiMo forgings for core fillers) |
Water
China Energy industry
Standards |
|
|
NB/T 20006.36-2017 |
(Hydraulic steel alloys for pressurized Water reactors - Part 36: Reactor pressure vessel core area with 19MnNiMo forgings) |
Water
China Energy industry
Standards |
|
|
NB/T 14022-2017 |
(Shale Water sensitivity evaluation recommended practice) |
Water
China Energy industry
Standards |
|
|
NB/T 51047-2016 |
(Gob - side Roadway high Water material filling the technical requirements) |
Water
China Energy industry
Standards |
|
|
NB/T 51046-2016 |
(Comprehensive mechanization mining material with high Water bag filled with technical requirements) |
Water
China Energy industry
Standards |
|
|
NB/T 51036-2015 |
(Mine Water multi-parameter portable tester) |
Water
China Energy industry
Standards |
|
|
NB/T 51026-2014 |
(Deep coal mine Water treatment reverse osmosis technology requirements) |
Water
China Energy industry
Standards |
|
|
NB/SH/T 0407-2013 |
Standard test method for Water soluble acids and alkalis of petroleum waxes |
Water
China Energy industry
Standards |
|
|
NB/SH/T 0207-2010 |
Standard test method for Water in insulating liquids by coulometric Karl Fischer titration |
Water
China Energy industry
Standards |
|
|
NB/T 35086-2016 |
(Code for design of Water stop device for gate of hydropower project) |
Water
China Energy industry
Standards |
|
|
NB/T 35072-2015 |
Preparation regulation for special investment on soil and Water conservation of hydropower projects |
Water
China Energy industry
Standards |
|
|
NB/T 35053-2015 |
Design code for layered Water intake of hydropower station |
Water
China Energy industry
Standards |
|
|
NB/T 35052-2015 |
Specification of Water quality analysis for hydropower engineering geological investigation |
Water
China Energy industry
Standards |
|
|
NB/T 35020-2013 |
Design specifications for hydraulic hoist in Hydropower and Water resources projects |
Water
China Energy industry
Standards |
|
|
NB/T 34038-2016 |
(Inverter for solar photovoltaic Water pump system) |
Water
China Energy industry
Standards |
|
|
NB/T 34034-2016 |
(Air source heat pump Water heater enamel storage tank) |
Water
China Energy industry
Standards |
|
|
NB/T 34033-2016 |
(Home solar Water heater bracket) |
Water
China Energy industry
Standards |
|
|
NB/T 34032-2016 |
(Specification for after - sales service of domestic solar Water heating systems) |
Water
China Energy industry
Standards |
|
|
NB/T 34027-2015 |
(Household and similar air source heat pump Water heaters annual comprehensive energy efficiency test method) |
Water
China Energy industry
Standards |
|
|
NB/T 34023-2015 |
Water storage tank with enamel interior for solar water heaters |
Water
China Energy industry
Standards |
|
|
NB/T 34012-2013 |
Technical specification for the Water cooled vibrating grate of biomass boiler |
Water
China Energy industry
Standards |
|
|
NB/T 32024-2014 |
Header boxes of solar Water heating system |
Water
China Energy industry
Standards |
|
|
NB/T 32022-2014 |
Specifications of design, installation and acceptance for wall-hanging solar Water heating system |
Water
China Energy industry
Standards |
|
|
NB/T 31086-2016 |
Technical code on preparation of soil and Water conservation for wind farm projects |
Water
China Energy industry
Standards |
|
|
NB/T 25060-2016 |
(Technical requirements for cold - repair plant of pressurized Water reactor nuclear power plant) |
Water
China Energy industry
Standards |
|
|
NB/T 25050-2016 |
Technical specification for selection of feedWater pump for PWR nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 25044.5-2016 |
Code for construction quality acceptance of nuclear power conventional island and balance of plant Part 5: The system with the Water treatment and hydrogen generation |
Water
China Energy industry
Standards |
|
|
NB/T 25044.3-2014 |
Code for construction quality acceptance of nuclear power conventional island and balance of plant. Part 3: Circulating Water system equipments |
Water
China Energy industry
Standards |
|
|
NB/T 25043.5-2016 |
Technical specification for construction of nuclear power conventional island and balance of plant Part 5: The system with the Water treatment and hydrogen generation |
Water
China Energy industry
Standards |
|
|
NB/T 25043.3-2014 |
Specification for erection of nuclear power conventional island and balance of plant. Part 3: Circulating Water system equipments |
Water
China Energy industry
Standards |
|
|
NB/T 25039-2014 |
Recommended practices for the prevention of Water damage to steam turbines used for light water nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 25038-2014 |
Circulating Water system commissioning program rule of PWR |
Water
China Energy industry
Standards |
|
|
NB/T 25037-2014 |
FeedWater system commissioning program rule of PWR |
Water
China Energy industry
Standards |
|
|
NB/T 25033-2014 |
Guidelines for screening flow accelerated corrosion sensitive pipe of conventional island for pressurized Water reactor nuclear plant |
Water
China Energy industry
Standards |
|
|
NB/T 25025-2014 |
Guideline on Water leakage or hydrogen leakage of generator of nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 25016.6-2013 |
Surveillance guide for conventional island equipment in nuclear power plants. Part 6: Feed Water heater |
Water
China Energy industry
Standards |
|
|
NB/T 25011-2013 |
Commissioning guideline for Water chemical treatment system of nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 25009-2012 |
Energy statistics procedure in pressurized Water nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 25008-2011 |
Anticorrosion and antifouling of seaWater cooling system in nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20390-2016 |
(Pressurized Water reactor nuclear power plant mechanical module installation and acceptance of technical regulations) |
Water
China Energy industry
Standards |
|
|
NB/T 20380-2016 |
(Of PWR nuclear steam supply system supplies Water requirements) |
Water
China Energy industry
Standards |
|
|
NB/T 20370-2016 |
(Passive pressurized Water reactor nuclear power plant nuclear island main system layout guidelines) |
Water
China Energy industry
Standards |
|
|
NB/T 20354.3-2015 |
Design and manufactering specification of steam turbine rotors for pressurized Water reactor nuclear power plant - Part 3: Welded rotor |
Water
China Energy industry
Standards |
|
|
NB/T 20354.2-2015 |
Design and manufactering specification of steam turbine rotor for pressurized Water reactor nuclear power plant - Part 2: Shrunk rotor |
Water
China Energy industry
Standards |
|
|
NB/T 20354.1-2015 |
Design and manufactering specification of steam turbine rotors for pressurized Water reactor nuclear power plant - Part1: Integral rotor |
Water
China Energy industry
Standards |
|
|
NB/T 20334-2015 |
General requirements for noise analysis of reactor and primary loop in pressurized Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20333-2015 |
Design criteria of safety depressurization and venting system for primary loop of pressurized Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20327.2-2015 |
Special doors of pressurized Water reactor nuclear power plant - Part 2: Manufacture |
Water
China Energy industry
Standards |
|
|
NB/T 20327.1-2015 |
Special doors of pressurized Water reactor nuclear power plant - Part 1: Design |
Water
China Energy industry
Standards |
|
|
NB/T 20319-2014 |
Criterion for technical specification for pressurized Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20315-2014 |
Design and fabrication specification for steam generator of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20312-2014 |
Code on the in-service Inspections of mechanical components of pressurized Water reactor nuclear islands |
Water
China Energy industry
Standards |
|
|
NB/T 20311-2014 |
Design criteria for containment spray system of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20310-2014 |
Design requirements for structures of ultimate heat sink for pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20309-2014 |
General design requirements of pressurized Water reactor nuclear power plants with active safety systems |
Water
China Energy industry
Standards |
|
|
NB/T 20308-2014 |
Design code for nuclear safety related plants foundation for pressure Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20305-2014 |
Ageing management guideline for feeder pipe of pressurized heavy Water nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20304-2014 |
Technical guideline for installation of reactor protection system of pressured Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20303-2014 |
Design requirements for prestressed concrete containments for pressure Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20295-2014 |
Ageing management guideline for pressure tubes of pressurized heavy Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20285-2014 |
General requirements of reactor system design for pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20278-2014 |
Design criteria for emergency feedWater system of pressurized water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20276-2014 |
Design criteria for component cooling Water system of passive pressurized water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20275-2014 |
Stud welding specification for pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20269-2014 |
Design and fabrication specification for reactor coolant pump of pressurized Water ractor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20262-2014 |
Design criteria for steam generator blowdown system of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20261-2014 |
Design criteria for emergency core cooling system of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20260-2014 |
Design criteria for residual heat removal system of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20241-2013 |
The requirement of in-service inspection for pressurized Water reactor steam generator tubes |
Water
China Energy industry
Standards |
|
|
NB/T 20240-2013 |
Reload startup physics tests for pressurized Water reactors of nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20232-2013 |
Design criteria for fuel handling and storage systems of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20231-2013 |
Design criteria for engineered safety features of pressurized Water reactor nuclear newer plants |
Water
China Energy industry
Standards |
|
|
NB/T 20230-2013 |
Fracture toughness requirements for materials uesd for coolant pressure boundary of pressurized Water reactor |
Water
China Energy industry
Standards |
|
|
NB/T 20224-2013 |
Design and manufacture specification of control rod drive mechanism of pressurized Water reactor for nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20221-2013 |
Corrosion inspection of secondary thermodynamic equipments of pressure Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20220-2013 |
Irradiation surveillance of reactor pressure vessels(RPVs)for light-Water cooled reactors |
Water
China Energy industry
Standards |
|
|
NB/T 20215-2013 |
Type test of movable micro-Sssion chamber for pressurized Water reactor nuclear power plants in-core neutron flux measurement |
Water
China Energy industry
Standards |
|
|
NB/T 20212-2013 |
Qualification procedure of safety class three hundred eighty Voltage motors for pressurized Water reactor power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20211-2013 |
Qualification procedure of safety class medium voltage motors for pressurized Water reactor power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20204-2013 |
Specification for underWater assembly of nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20203-2013 |
Technical specification for ecological surveyinreceiving Water of nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20195-2012 |
Reactor thermal power measurement procedure for reactor core in pressurized Water nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20193-2012 |
Design code for steam/Water piping of conventional island of nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20192-2012 |
General requirements for pilot operated safety valves of pressurized Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20191-2012 |
Accessibility criteria for in-service inspections in structural design of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20189-2012 |
Interface design criteria concerning nuclear steam supply system and turbine building of pressuried Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20188-2012 |
Design criteria for essential service Water system for pressuried water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20187-2012 |
Design criteria for reactor coolant system in pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20178-2012 |
Design criteria of nuclear sampling system of pressurized Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20177-2012 |
Design criteria for component cooling Water system of pressurized water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20174-2012 |
The technical requirements of field fabrication and acceptance for carbon and stainless steel tank in pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20171-2012 |
Qualification procedure for safety class 3 pump of pressurized Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20169-2012 |
Qualification procedure for auxiliary feed Water turbine-driven pump of pressurized water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20168-2012 |
Qualification procedure for check valve of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20167-2012 |
Qualification procedure for isolation valve of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20166-2012 |
Qualification procedure for charging pump of pressurized Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20165-2012 |
Qualification procedure for residual heat removal pump of pressurized Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20164-2012 |
Qualification procedure for auxiliary feed Water motor-driven pump of pressurized water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20163-2012 |
Qualification procedure for containment spray pump and low head safety injection pump of pressurized Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20161-2012 |
Installation and commissioning technical guideline for ex-core neutron flux measuring system for pressurized Water reactor of nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20160-2012 |
The technical specification for Watertight stainless steel liner of PWR nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20158-2012 |
Specification for volute concrete construct of circulating Water pump of pressurized water reactors nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20151-2012 |
Guideline for preparing ageing management programme of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20144-2012 |
Initial criticality tests for pressurized Water reactor of nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20133.6-2012 |
Specifications for protective coatings used in pressurized Water reactor nuclear power plants. Part 6: Coating operation |
Water
China Energy industry
Standards |
|
|
NB/T 20133.5-2012 |
Specifications for protective coatings used in pressurized Water reactor nuclear power plants. Part 5: Standard test method for chemical resistance |
Water
China Energy industry
Standards |
|
|
NB/T 20133.4-2012 |
Specifications for protective coatings used in pressurized Water reactor nuclear power plants. Part 4: Determination of the decontaminability of coatings |
Water
China Energy industry
Standards |
|
|
NB/T 20133.3-2012 |
Specifications for protective coatings used in pressurized Water reactor nuclear power plants. Part 3: Standard test method for effects of gamma radiation |
Water
China Energy industry
Standards |
|
|
NB/T 20133.2-2012 |
Specifications for protective coatings used in pressurized Water reactor nuclear power plants. Part 2: Standard test method for evaluating coatings at simulated design basis accident(DBA)conditions |
Water
China Energy industry
Standards |
|
|
NB/T 20133.1-2012 |
Specifications for protective coatings used in pressurized Water reactor nuclear power plants. Part l: General requirements |
Water
China Energy industry
Standards |
|
|
NB/T 20132-2012 |
Design requirements of personnel airlock for containment in pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20131-2012 |
Design criteria for emergency core cooling sump of pressurized Water reactors nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20129-2012 |
General technical regulation for installation, test and acceptance of emergency diesel generator of nuclear island in pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20114-2012 |
The technical regulation of pressurized Water reactor CRDW power supply system installation |
Water
China Energy industry
Standards |
|
|
NB/T 20106-2012 |
Model regulation of cooling Water for nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20104-2012 |
Analysis requirement for anticipated transient without scram on pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20103-2012 |
Accident analysis and safety criteria for pressurized Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20100-2012 |
Principles for main primary system and main steam system overpressure analysis of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20099-2012 |
Analysis demand for loss-of-coolant accident of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20098-2012 |
Design criteria for containment hydrogen control system of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20094-2012 |
Containment ventilation system of pressurized Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20092-2012 |
Inspection guide for the moisture separator reheater of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20091-2012 |
Inspection guide for the turbine of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20081-2012 |
Qualification procedure for class 1E transformer applied in pressurized-Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20078-2012 |
Qualification procedure for safety-related pneumatic control valve of pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20064-2012 |
Installation and test requirement of in-core instrumentation system in pressured Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20057.2-2012 |
Pressurized Water reactor nuclear power plants reactor system design. Core. Part 2: Thermal hydraulic design criteria |
Water
China Energy industry
Standards |
|
|
NB/T 20057.1-2012 |
Pressurized Water reactor nuclear power plants reactor system design. Core. Part 1: Nuclear design |
Water
China Energy industry
Standards |
|
|
NB/T 20056-2011 |
Calculation of decay heat power in the nuclear fuel of light Water reactors |
Water
China Energy industry
Standards |
|
|
NB/T 20050-2011 |
Recommended practice for the protection of electric equipment in nuclear power plants from Water hazards |
Water
China Energy industry
Standards |
|
|
NB/T 20031-2010 |
Control of hydrogen concentration in the containment after accidents in nuclear power plants of pressurized Water reactor |
Water
China Energy industry
Standards |
|
|
NB/T 20030-2010 |
Conventional colors for components and identification method for piping in pressurized Water reactor nuclear power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20017-2010 |
Structural integrity test of containments for pressurized Water reactor power plants |
Water
China Energy industry
Standards |
|
|
NB/T 20012-2010 |
Design requirements for nuclear safety related concrete structure for pressure Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20011-2010 |
Design requirements for nuclear safety related steel structure for pressure Water reactor nuclear power plant |
Water
China Energy industry
Standards |
|
|
NB/T 20009.9-2013 |
Welding materials for pressurized Water reactor nuclear power plants. Part 9: Carbon steel wires and fluxes for submerged arc welding of class 1, 2, 3 components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.8-2012 |
Welding material for pressurized Water reactor nuclear power plants. Part 8: Nickel-based alloy wires and filler rods for class 1, 2, 3 components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.7-2012 |
Welding material for pressurized Water reactor nuclear power plants. Part 7: Stainless steel wires and filler rods for class 1, 2, 3 components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.6-2012 |
Welding material for pressurized Water reactor nuclear power plants. Part 6: Carbon steel electrodes and rods for gas shielded arc welding of class 1, 2, 3 components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.5-2013 |
Welding materials for pressurized Water reactor nuclear power plants. Part 5: Carbon steel flux cored electrodes for gas shielded arc welding of class 1, 2, 3 components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.4-2013 |
Welding materials for pressurized Water reactor nuclear power plants. Part 4: Nickel-based alloy covered electrodes for class 1, 2, 3 components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.35-2014 |
Welding material for pressurized Water reactor nuclear power plants. Part35: Low alloy steel covered electrodes for containment vessel |
Water
China Energy industry
Standards |
|
|
NB/T 20009.33-2015 |
Welding material for pressurized Water reactor nuclear power plants - Part 33: Stainless steel wire and fluxes for submerged arc welding of safety-related components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.3-2010 |
Welding material for pressurized Water reactor nuclear power plants. Part 3: Stainless steel covered electrodes for Class 1, 2, 3 components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.29-2014 |
Welding material for pressurized Water reactor nuclear power plants. Part 29: Carbon steel wire and fluxes for submerged are welding of safety-related components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.28-2015 |
Welding material for pressurized Water reactor nuclear power plants - Part 28: Nickel alloy welding electrodes for safety-related components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.26-2014 |
Welding material for pressurized Water reactor nuclear power plants. Part 26: Carbon steel electrodes for gas shielded an wedding for safety-related compoaenb |
Water
China Energy industry
Standards |
|
|
NB/T 20009.25-2014 |
Welding material for pressurized Water reactor nuclear power plants. Part 25: Carbon steel electrodes for flux cored arc welding for safety-related components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.24-2015 |
Welding material for pressurized Water reactor nuclear power plants - Part 24: Nickel alloy covered electrodes for safety-related components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.22-2015 |
Welding material for pressurized Water reactor nuclear power plants - Part 22: Low alloy covered electrodes for safety-related components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.2-2010 |
Welding material for pressurized Water reactor nuclear power plants. Part 2: Low alloy steel covered electrodes for Class 1, 2, 3, components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.21-2014 |
Welding material for pressurized Water reactor nuclear power plants Part 21: Carbon steel covered electrodes for safety-related components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.14-2013 |
Welding materials for pressurized Water reactor nuclear power plants. Part 14: Hard facing welding consumables for class 1, 2, 3 components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.13-2013 |
Welding materials for pressurized Water reactor nuclear power plants. Part 13: Stainless steel strips and fluxes for cladding of class 1, 2, 3 components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.12-2013 |
Welding materials for pressurized Water reactor nuclear power plants. Part 12: Nickel-based alloy strip cladding with flux for class 1 components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.1-2010 |
Welding material for pressurized Water reactor nuclear power plants. Part 1: Carbon steel covered electrodes for class 1, 2, 3 components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.11-2013 |
Welding materials for pressurized Water reactor nuclear power plants. Part 11: Nickel-Stainless steel wires and fluxes for submerged arc welding of class 1, 2, 3 components |
Water
China Energy industry
Standards |
|
|
NB/T 20009.10-2013 |
Welding materials for pressurized Water reactor nuclear power plants. Part 10: Low alloy steelwelding wire and flux for submerged arc welding of class 1 components |
Water
China Energy industry
Standards |
|
|
NB/T 20008.9-2012 |
Other material for pressurized Water reactor nuclear power plants. Part 9: Hot rolled or hot extruded nickel-chromium-iron alloy bars |
Water
China Energy industry
Standards |
|
|
NB/T 20008.8-2012 |
Other materials for pressurized Water reactor nuclear power plants. Part 8: Hot extruded nickel-chromium-iron alloy pipes |
Water
China Energy industry
Standards |
|
|
NB/T 20008.7-2013 |
Other materials for pressurized Water reactor nuclear power plaets - Part 7: seamless nickel-chromium-iron alloy for steam generator tubes bundles |
Water
China Energy industry
Standards |
|
|
NB/T 20008.6-2012 |
Other material for pressurized Water reactor nuclear power plants. Part 6: Hot rolled nickel-chromium-iron alloy plates |
Water
China Energy industry
Standards |
|
|
NB/T 20008.5-2012 |
Other material for pressurized Water reactor nuclear power plants. Part 5: Class 1 and 2 hot rolled nickel-chromium-iron alloy plates |
Water
China Energy industry
Standards |
|
|
NB/T 20008.4-2012 |
Other material for pressurized Water reactor nuclear power plants. Part 4: Forged or rolled class 1, 2 and 3 nickel-chromium-iron alloy parts |
Water
China Energy industry
Standards |
|
|
NB/T 20008.3-2012 |
Other material for pressurized Water reactor nuclear power plants. Part 3: Class 3 Copper-Aluminium alloy castings for anxiliary system pumps and valves |
Water
China Energy industry
Standards |
|
|
NB/T 20008.25-2015 |
Other material for pressurized Water reactor nuclear power plants - Part 25: GH4169 alloy wires for reactor vessel internals |
Water
China Energy industry
Standards |
|
|
NB/T 20008.24-2015 |
Other material for pressurized Water reactor nuclear power plants - Part 24: GH4145 alloy bars for reactor vessel internals |
Water
China Energy industry
Standards |
|
|
NB/T 20008.23-2015 |
Other Material for pressurized Water reactor nuclear power plants - Part 23: Ni-base-alloy Wires used for CRDM |
Water
China Energy industry
Standards |
|
|
NB/T 20008.22-2015 |
Other material for pressurized Water reactor nuclear power plants - Part 22: GH4145 alloy bars used for CRDM |
Water
China Energy industry
Standards |
|
|
NB/T 20008.2-2010 |
Other material for pressurized Water reactor nuclear power plants. Part 2: Mn-Mo-V steel castings for use in the fabrication of steam generator and reactor coolant pump supports, main steam line supports |
Water
China Energy industry
Standards |
|
|
NB/T 20008.21-2015 |
Other material for pressurized Water reactor nuclear power plants - Part 21: GH4169 alloy bars used for CRDM |
Water
China Energy industry
Standards |
|
|
NB/T 20008.17-2012 |
Other material for pressurized Water reactor nuclear power plants. Part 17: Class 2 and 3 unalloyed and alloy ductile iron castings |
Water
China Energy industry
Standards |
|
|
NB/T 20008.16-2012 |
Other material for pressurized Water reactor nuclear power plants. Part 16: Cabolt-base alloy for control rod drive mechanism |
Water
China Energy industry
Standards |
|
|
NB/T 20008.15-2012 |
Other material for pressurized Water reactor nuclear power plants. Part 15: Titanium plate for use in the fabrication of class 3 heat exchanger plates |
Water
China Energy industry
Standards |
|
|
NB/T 20008.14-2013 |
Additional materials for Pressurized Water reactor nuclear power plants. part 14: Nickel-chromium-iron alloy wires of springs |
Water
China Energy industry
Standards |
|
|
NB/T 20008.13-2013 |
Other material for pressurized Water reactor power plants. Part 13: Class 1, 2, 3studs, bolts, screws, threaded rods and nuts |
Water
China Energy industry
Standards |
|
|
NB/T 20008.12-2010 |
Other material for pressurized Water reactor nuclear power plants. Part 12: Forged or rolled bars for class 1, 2, 3 bolts and nuts |
Water
China Energy industry
Standards |
|
|
NB/T 20008.1-2012 |
Other material for pressuriaed Water reactor nuclear power plant. Part1: Alloy steel forgings for use in reactor coolant system supports |
Water
China Energy industry
Standards |
|
|
NB/T 20008.11-2013 |
Other material for pressrized Water reactor nuclear power plant. Part11: Rolled or forged bars for the manufacture of Class Si and S2 shafts, tie-rods and support bolts |
Water
China Energy industry
Standards |
|
|
NB/T 20008.10-2012 |
Other material for pressurized Water reactor nuclear power plants. Part 10: Ni-Cr-Fe alloy rolled bars used for internal support pins and bolting |
Water
China Energy industry
Standards |
|
|
NB/T 20007.9-2011 |
Stainless steel for pressurized Water reactor nuclear power plant. Part 9: Class 1, 2, 3 austenitic stainless steel seamless buttwelding fittings |
Water
China Energy industry
Standards |
|
|
NB/T 20007.8-2010 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 8: Class 1, 2, 3 austenitic stainless steel seamless pipes |
Water
China Energy industry
Standards |
|
|
NB/T 20007.7-2012 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 7: Austenitic stainless steel plate and strip for Class Si and S2 supports |
Water
China Energy industry
Standards |
|
|
NB/T 20007.6-2012 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 6: Controlled nitrogen content austenitic stainless steel plate for Reactor Internal |
Water
China Energy industry
Standards |
|
|
NB/T 20007.5-2010 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 5: Class 1, 2, 3 austenitic stainless steel plates |
Water
China Energy industry
Standards |
|
|
NB/T 20007.42-2015 |
Stainless steel for pressurized Water reactor nuclear power plants - Part 42: precipitation-hardening stainless steel bars for reactor vessel internals |
Water
China Energy industry
Standards |
|
|
NB/T 20007.4-2012 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 4: Niobium stabilized austenitic stainless steel forgings for the shafts of reactor coolant pumps |
Water
China Energy industry
Standards |
|
|
NB/T 20007.41-2015 |
Stainless steel for pressurized Water reactor nuclear power plants - Part 41: austenitic stainless steel seamless pipes used for reactor vessel internals |
Water
China Energy industry
Standards |
|
|
NB/T 20007.40-2015 |
Stainless steel for pressurized Water reactor nuclear power plants - Part 40: austenitic stainless steel forgings used for reactor vessel internals |
Water
China Energy industry
Standards |
|
|
NB/T 20007.39-2015 |
Stainless steel for pressurized Water reactor nuclear power plants - Part 39: Martensitic stainless steel bas used for drive rod of CRDM |
Water
China Energy industry
Standards |
|
|
NB/T 20007.38-2015 |
Stainless steel for pressurized Water reactor nuclear power plants - Part 38: Austenitic stainless steel bars used for locking screw of CRDM |
Water
China Energy industry
Standards |
|
|
NB/T 20007.37-2015 |
Stainless steel for pressurized Water reactor nuclear power plants - Part 37: Austenitic stainless steel bars used for non-pressure-retaining components of CRDM |
Water
China Energy industry
Standards |
|
|
NB/T 20007.36-2015 |
Stainless steel for pressurized Water reactor nuclear power plant - Part 36: Austenitic stainless steel forged bars used for pressure-retaining components of CRDM |
Water
China Energy industry
Standards |
|
|
NB/T 20007.35-2015 |
Stainless steel for pressurized Water reactor nuclear power plants - Part 35: 06Cr18Ni11Ti stainless steel plates used for containment vessel mechanical penetrations |
Water
China Energy industry
Standards |
|
|
NB/T 20007.34-2015 |
Stainless steel for pressurized Water reactor nuclear power plants - Part 34: 03Cr22Mn5Ni2MoCuN duplex stainless steel plates for modules |
Water
China Energy industry
Standards |
|
|
NB/T 20007.33-2015 |
Stainless steel for pressurized Water reactor unclear power plants - Part 33: 015Cr17Ni12Mo2N stainless steel forged pipes for reactor coolant piping |
Water
China Energy industry
Standards |
|
|
NB/T 20007.32-2015 |
Stainless steel for pressurized Water reactor nuclear power plants - Part 32: 022Cr19Ni10 stainless steel seamless pipes for containment vessel |
Water
China Energy industry
Standards |
|
|
NB/T 20007.3-2012 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 3: Controlled nitrogen content austenitic stainless steel forgings for core upports and upper support plates |
Water
China Energy industry
Standards |
|
|
NB/T 20007.31-2015 |
Stainless steel for pressurized Water reactor nuclear power plants - Part 31: 022Cr19Ni10 stainless steel forgings used for containment vessel |
Water
China Energy industry
Standards |
|
|
NB/T 20007.29-2014 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 29: non-pressure-retaining category A, B and C austenltic-ferritic duplex stainless steel castings for pumps |
Water
China Energy industry
Standards |
|
|
NB/T 20007.28-2014 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 28: Class 3 pressure-retaining austenitic-ferritic (duplex) stainless steel castings for seawater application |
Water
China Energy industry
Standards |
|
|
NB/T 20007.27-2013 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 27: Cast Elbows and inclined nozzles made from Austenitic-ferritic stainless steel for reactor coolant piping |
Water
China Energy industry
Standards |
|
|
NB/T 20007.26-2012 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 26: Austenitic-ferritic stainless steel centrifugally cast pipes for reactor coolant piping |
Water
China Energy industry
Standards |
|
|
NB/T 20007.25-2013 |
Stainless steel for pressurized Water reactor nuclear power plant. Part25: Chromium nickel austenitic-ferritic stainless steel containing no molybdenum for no-pressure-retaining cast internal pump parts of category A, B and C |
Water
China Energy industry
Standards |
|
|
NB/T 20007.24-2013 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 24: austenitic-ferritic stainless steel castings pressured for reactor coolant pump casing |
Water
China Energy industry
Standards |
|
|
NB/T 20007.23-2013 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 23: Class 1, 2 and 3 pressure-retaining austenitic-ferritic stainless steel castings |
Water
China Energy industry
Standards |
|
|
NB/T 20007.22-2012 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 22 Seamless pipes made from martensitic stainless steel for drive rods of reactor control rod drive mechanisms |
Water
China Energy industry
Standards |
|
|
NB/T 20007.2-2012 |
Stainless steel for pressurized Water reactor of nuclear power plants. Part 2: Austenitic stainless steel forgings for class 2 and 3 tube plates of heat exchanger |
Water
China Energy industry
Standards |
|
|
NB/T 20007.21-2012 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 21: Martensitic stainless steel plates for use in making steam generator tube support plates |
Water
China Energy industry
Standards |
|
|
NB/T 20007.20-2013 |
Stainless steel for pressurized Water reactor power plant. Part 20: Martensitic stainless steel for non-pressure-retaining internal category A, B and C parts of pumps |
Water
China Energy industry
Standards |
|
|
NB/T 20007.19-2013 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 19: Class 1, 2 and 3 pressure-retaining martensitic stainless steel castings |
Water
China Energy industry
Standards |
|
|
NB/T 20007.18-2012 |
Stainless steel for pressurized Water reactor nuclear power plants. Part, A: Rolled or forged martensitic stainless steel parts for class 2 and 3 auxiliary pump drive shafts |
Water
China Energy industry
Standards |
|
|
NB/T 20007.17-2012 |
Stainless steel for pressurized Water reactor nuclear power plants. Part17: Martensitic stainless steel forgings used for internal hold down springs |
Water
China Energy industry
Standards |
|
|
NB/T 20007.16-2012 |
Stainless steel for pressurized Water reactor nuclear power plants. Part16: Class 2 and 3 martensitic stainless steel forgings |
Water
China Energy industry
Standards |
|
|
NB/T 20007.15-2012 |
Stainless steel for pressurized Water reactor nuclear power plants. Part15: Strain hardened hot worked rolled or forged bars made from austenitic stainless steel used for the fabrication of bolting material for reactor internals |
Water
China Energy industry
Standards |
|
|
NB/T 20007.14-2010 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 14: Class 1, 2, 3 austenitic stainless steel forged or rolled bars |
Water
China Energy industry
Standards |
|
|
NB/T 20007.13-2012 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 13: Forged tubes and elbows made from controlled nitrogen austenitic stainless steel for reactor coolant piping |
Water
China Energy industry
Standards |
|
|
NB/T 20007.12-2013 |
Stainless steel for pressurized Water reactor nuclear power plant. Part 12: Class 1, 2 and 3 austenitic stainless steel fittings welded with the addition of filler metal |
Water
China Energy industry
Standards |
|
|
NB/T 20007.1-2010 |
Stainless steel for pressurized Water reactor nuclear power plants. Part 1: Class 1, 2 and 3 austenitic stainless steel forgings |
Water
China Energy industry
Standards |
|
|
NB/T 20007.11-2013 |
Stainless steel for pressurized Water reactor power plant. Part 11: Class 1, 2 and 3 austenitic stainless steel pipes welded with the addition of filler metal |
Water
China Energy industry
Standards |
|
|
NB/T 20007.10-2013 |
Stainless steel for pressurized Water reactor power plant. Part 10: Cold rolled or cold drawn seamless austenitic stainless steel tubes for class 2 and 3 heat exchangers |
Water
China Energy industry
Standards |
|
|
NB/T 20006.9-2013 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 9: Mn-Ni-Mo steel forgings for steam generator channel head |
Water
China Energy industry
Standards |
|
|
NB/T 20006.8-2012 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 8: Mn-Ni-Mo steel forgings for steam generator upper heads |
Water
China Energy industry
Standards |
|
|
NB/T 20006.7-2012 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 7: Mn-Ni-Mo steel forgings for steam generators shells |
Water
China Energy industry
Standards |
|
|
NB/T 20006.6-2011 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 6: Mn-Ni-Mo steel forgings for PWR steam generator tube plates |
Water
China Energy industry
Standards |
|
|
NB/T 20006.5-2012 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 5: Mn-Ni-Mo alloy steel forgings for reactor pressure vessel heads |
Water
China Energy industry
Standards |
|
|
NB/T 20006.4-2011 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 4: Mn-Ni-Mo steel forgings for reactor pressure vessels nozzles |
Water
China Energy industry
Standards |
|
|
NB/T 20006.3-2011 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 3: Mn-Ni-Mo steel forgings for transition rings and flanges of reactor pressure vessels |
Water
China Energy industry
Standards |
|
|
NB/T 20006.31-2015 |
Alloy steel for pressurized Water reactor nuclear power plants - Part 31: 10MnNiMo steel plates for contaiment vessel |
Water
China Energy industry
Standards |
|
|
NB/T 20006.2-2011 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 2: Mn-Ni-Mo steel forgings for reactor pressure vessel shells outside the beltline region |
Water
China Energy industry
Standards |
|
|
NB/T 20006.16-2013 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 16: Mn-Ni-Mo steel plates for pressurizer supports |
Water
China Energy industry
Standards |
|
|
NB/T 20006.15-2013 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 15: Mn-Ni-Mo steel plates for pressure-retaining boundaries |
Water
China Energy industry
Standards |
|
|
NB/T 20006.14-2010 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 14: Forged nickel-chromium-molybdenum steel bars with or without vanadium for use in making Class 1 components bolts fastener |
Water
China Energy industry
Standards |
|
|
NB/T 20006.13-2012 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 13: Alloy steel forgings for reactor coolant pump motor shaft assembles |
Water
China Energy industry
Standards |
|
|
NB/T 20006.12-2011 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 12: Mn-Ni-Mo steel main flange forgings for pressurized water reactor coolant pumps |
Water
China Energy industry
Standards |
|
|
NB/T 20006.1-2011 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 1: Mn-Ni-Mo steel forgings for reactor pressure vessel shelss in the beltline region |
Water
China Energy industry
Standards |
|
|
NB/T 20006.11-2010 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 11: Mn-Ni-Mo steel forgings for pressurizer shells and heads |
Water
China Energy industry
Standards |
|
|
NB/T 20006.10-2010 |
Alloy steel for pressurized Water reactor nuclear power plants. Part 10: Mn-Ni-Mo steel forgings for pressurizer and steam generator nozzles and covers |
Water
China Energy industry
Standards |
|
|
NB/T 20005.9-2010 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants. Part 9: Seamless steel pipes for class 2, 3 piping |
Water
China Energy industry
Standards |
|
|
NB/T 20005.7-2010 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants. Part 7: Class 1, 2, 3 plates |
Water
China Energy industry
Standards |
|
|
NB/T 20005.6-2013 |
Carbon steel and alloy steel for pressurized Water reactor nuclear power plants. Part 6: Motor support stand castings for reactor coolant pumps |
Water
China Energy industry
Standards |
|
|
NB/T 20005.5-2013 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants. Part 5: Class 1, 2 and 3 pressure retaining castings |
Water
China Energy industry
Standards |
|
|
NB/T 20005.4-2012 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants. Part 4: The forged or rolled parts for use in steam generator main steam systems, feedwater flow control systems, auxiliary feedwater systems and turbine bypass systems |
Water
China Energy industry
Standards |
|
|
NB/T 20005.34-2015 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plant - Part 34: Carbon steel shear studs for containment vessel |
Water
China Energy industry
Standards |
|
|
NB/T 20005.33-2015 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants - Part 33: 15Mn steel pipes for containment vessel |
Water
China Energy industry
Standards |
|
|
NB/T 20005.32-2015 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants - Part 32: 15MnHR steel plates for containment vessel |
Water
China Energy industry
Standards |
|
|
NB/T 20005.3-2012 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants. Part 3: Forgings for class 2, 3 auxiliary pump shafts |
Water
China Energy industry
Standards |
|
|
NB/T 20005.31-2015 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants - Part 31: 15Mn forgings for containment vessel |
Water
China Energy industry
Standards |
|
|
NB/T 20005.2-2012 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plant. Part 2: Forgings for class 2, 3 heat exchanger tube plates |
Water
China Energy industry
Standards |
|
|
NB/T 20005.17-2014 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants. Part 17: Pushed formed elbows for use in main steam systems |
Water
China Energy industry
Standards |
|
|
NB/T 20005.16-2012 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants. Part 16: Elbow for main steam system |
Water
China Energy industry
Standards |
|
|
NB/T 20005.15-2013 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants. Part 15: Fittings welded with the addition of filler metal for use in class 2 and 3 auxiliary piping |
Water
China Energy industry
Standards |
|
|
NB/T 20005.14-2012 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants. Part 14: Class 2 and 3 butt-welding seamless fittings |
Water
China Energy industry
Standards |
|
|
NB/T 20005.13-2012 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants. Part 13: Seamless drawn carbon steel tubes for class 2 and 3 heat exchangers |
Water
China Energy industry
Standards |
|
|
NB/T 20005.12-2010 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants. Part 12: Seamless steel pipes for use in main steam systems, feedwater flow control systems, auxiliary feedwater systems and turbine bypass systems |
Water
China Energy industry
Standards |
|
|
NB/T 20005.1-2010 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants. Part 1: Class 1, 2, 3 forgings |
Water
China Energy industry
Standards |
|
|
NB/T 20005.11-2012 |
Carbon steel and low alloy steel for pressurizd Water reactor nuclear power plant. Part 11: Seamless pipes for class Si and S2 supports |
Water
China Energy industry
Standards |
|
|
NB/T 20005.10-2013 |
Carbon steel and low alloy steel for pressurized Water reactor nuclear power plants. Part 10: Class 2 and 3 steel pipes welded with the addition of filler metal |
Water
China Energy industry
Standards |
|
|
NB/T 14003.1-2015 |
(Shale gas fracturing fluid - Part 1: slippery Water performance and evaluation method) |
Water
China Energy industry
Standards |
|
|
NB/T 14002.3-2015 |
Shale gas reservoir stimulation Part 3: recycling and disposal methods of fracturing flowback Water |
Water
China Energy industry
Standards |
|
|
NB/T 12004-2016 |
(Fischer-Tropsch organic acid Water, quiet, slightly blind determination) |
Water
China Energy industry
Standards |
|
|
NB/T 12002.1-2015 |
(Gasifier manufacturing technology conditions - Part 1: Coal Water Slurry Gasifier) |
Water
China Energy industry
Standards |
|
|
NB/T 10034-2016 |
Recommended practices on measuring the properties of Water-based fracturing fluid for coalbed methane |
Water
China Energy industry
Standards |
|
|
NB/T 10025-2016 |
Artifical coal core making method for Water-based fracturing fluid sensitivity evaluation |
Water
China Energy industry
Standards |
|
|
NB/SH/T 0872-2013 |
Standard test method for determination of shear stability of lubricating grease in presence of Water(water stability test) |
Water
China Energy industry
Standards |
|
|
NB/SH/T 0823-2010 |
Standard test method for corrosion-preventive properties of lubricating greases in presence of dilute synthetic sea Water environments |
Water
China Energy industry
Standards |
|
|
NB/T 20332-2015 |
Construction requirements for prestressed concrete containments for pressure Water reator nuclear power plants |
Water
China Energy industry
Standards |
|
|
GY/T 208-2005 |
Radio and TV tower maintenance specifications for power supply, lightning protection, Water supply and waste water treatment, ventilation and fire fighting systems+ |
Water
China Radio, Film & TV Industry
Standards |
|
|
HJ 851-2017 |
(Determination of Water quality methicillin and methomyloxime by liquid chromatography) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 850-2017 |
(Water quality - Determination of mesotrione - Liquid chromatography) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 849-2017 |
(Water quality - Determination of ethyl thiourea - Liquid chromatographic method) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 842-2017 |
Emergency-Related Parameters for Presurrized Water Reactor Nuclear Power Plants |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 841-2017 |
Analytical method for 131I in Water, milk, plant and animal thyroid gland |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 837-2017 |
Technical Guideline for Deriving Water Quality Criteria for the Protection of Human Health |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 831-2017 |
Technical Guideline for Deriving Water Quality Criteria for the Protection of Freshwater Aquatic Organisms |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 828-2017 |
Water quality -- Determination of the chemical oxygen demand -- Dichromate method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 827-2017 |
Water quality -- Determination of carbamates pesticides by Ultra performance liquid chromatography–triple quadrupole mass spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 826-2017 |
Water quality-Determination of anionic surfactants -- Flow injection analysis(FIA) and methylene blue spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 825-2017 |
Water quality-Determination of volatile phenols -- Flow injection analysis（FIA）and 4-AAP spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 824-2017 |
Water quality -- Determination of sulfide-Flow injection analysis （FIA）and methylene blue spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 823-2017 |
Water quality-Determination of cyanide -- Flow injection analysis（FIA）and spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 822-2017 |
Water quality -- Determination of aniline compounds -- Gas chromatography mass spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJBZ 4-1994 |
(Water-based paint) |
Water
China Environmental Protection Industry
Standards |
|
|
HJBZ 36-1999 |
(Magnetic-electric scale Water processor) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 99-2003 |
The techinical requirement for Water quality automatic analyzer of dissolved oxygen(DO) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 98-2003 |
The technical requirement for Water quality automatic analyzer of turbidity |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2022-2012 |
Technical specifications for coking wasteWater treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 96-2003 |
The technical requirement for Water quality automatic analyzer of PH |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 92-2002 |
Technical requirements for monitoring of total amount of pollutants in waste Water |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 91-2002 |
Technical specifications requirements for monitoring of surface Water and waste water |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 88-2003 |
Code for environmental impact of Water conservancy and hydropower project |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 86-2002 |
Water quality. Determination of biochemical oxygen demand (BOD). Speedy testing method of microorganism sensor |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 84-2001 |
Water quality. Determination of inorangic anions. Ion chromatography method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2021-2012 |
Technical specifications of internal circulation aerobic biological fluidized bed for wasteWater treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 82-2001 |
Specifications on environmental function zoning in near coastal seaWaters |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2019-2012 |
Technical specifications for wasteWater treatment and reuse of iron and steel industry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 74-2001 |
Water quality. Determination of chlorobenzene. Gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 73-2001 |
Water quality. Determination of Acrylonitrile. Gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 72-2001 |
Water quality. Determination of phthalate (dimethyl dibutyl dioctyl). Liquid chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 71-2001 |
Water quality. Determination of total organic carbon. Nondispersive infrared absorption method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 70-2001 |
High-chlorine wasteWater. Determination of chemical oxygen demand. Chlorine emendation method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 60-2000 |
Water quality. Determination of sulfides. Iodometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 59-2000 |
Water quality. Determination of beryllium. Graphite furnace atomic absorption spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 58-2000 |
Water quality. Determination of beryllium. Spectrophotometric method with erichrome cyanine R |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2018-2012 |
Technical specifications for sugar industry wasteWater treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 52-1999 |
Water quality. Guidance on sampling techniques of rivers |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 51-1999 |
Water quality. Determination of total salt. Gravimetric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 50-1999 |
Water quality. Determination of trichloro-aldehyde. 3-methyl-1-phenyl-5-pyrazolone spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 49-1999 |
Water quality. Determination of boron curcumin. Spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 433-2008 |
Technical requirement for source Water protection area signs |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2015-2012 |
Technical guidelines on Water pollution control engineering |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2014-2012 |
Technical specifications for biofilter in wasteWater bio-film treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 399-2007 |
Water quality. Determination of the chemical oxygen demand. Fast digestion-spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2013-2012 |
Technical specifications of up-flow anaerobic sludge blanket (UASB) reactor for wasteWater treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 377-2007 |
Technical requirement for environmental protection product. Water quality on-line automatic monitor of Chemical Oxygen Demand(CODCr) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 372-2007 |
The technical requirement and test procedures for Water quality automatic sampler |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 369-2007 |
Technical requirement for environmental labeling products. Chemical feed equipment for Water treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 363-2007 |
Technical requirement for environmental labeling products. Domestic solar Water beating system |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 356-2007 |
Technical specifications for validity of wasteWater on-line monitoring data(on trial) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 355-2007 |
Technical specifications for the operation and assessment of WasteWater on-line monitoring system(on trial) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 354-2007 |
Technical specifications for check and acceptance of wasteWater on-line monitoring system(on trial) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 353-2007 |
Technical guidelines of wasteWater on-line monitoring equipments and installation (on trial) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 347-2007 |
Water quality. Determination of fecal coliform-manifold zymotechnics and filter membrane |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 346-2007 |
Water quality. Determination of nitrate-nitrogen. Ultraviolet spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 345-2007 |
Water quality. Determination of iron-phenanthroline spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 344-2007 |
Water quality. Determination of manganese-formaldehyde oxime spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 343-2007 |
Water quality. Determination of chloride-mercury nitrate titration |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 342-2007 |
Water quality. Determination of sulfate-barium chromate spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 341-2007 |
Water quality. Determination of mercury-cold atomic fluorescent spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 338-2007 |
Technical guideline for delineating source Water protection areas |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 335-2006 |
Specifications for environmental protection product. Integrative sludge thickening and belt-deWatering machine |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2011-2012 |
Technical specifications for pulp and paper industry wasteWater treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2010-2011 |
Film biological wasteWater treatment engineering and technical specifications |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 21-1998 |
Sampling requirments for Waterquality monitoring in nuclear facilities |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 270-2006 |
Specifications for environmental protection product. Reverse osmosis Water treatment equipment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 243-2006 |
Specifications for environmental protection product. Oil and Water separator |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 201-2005 |
Technical requirement for environmental labeling products. Water based coatings |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 200-2005 |
Water quality. Determination of sulfide Gas-phase molecular absorption spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 2.3-1993 |
Technical guidelines for environmental impact assessment. SurfaceWater environment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 199-2005 |
Water quality. Determination of total-nitrogen. Gas-phase molecular absorption spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 198-2005 |
Water quality. Determination of nitrate-nitrogen. Gas-phase molecular absorption spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 197-2005 |
Water quality. Determination of nitrite. Nitrogen Gas-phase molecular absorption spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 196-2005 |
Water quality. Determination of Kjeldahl-nitrogen Gas-phase molecular absorption spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 195-2005 |
Water quality. Determination of ammonia-nitrogen Gas-phase molecular absorption spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 191-2005 |
The technical requirement for Water quality on-line automatic monitor of UV |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2008-2010 |
Technical specifications for filtration process in wasteWater treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 164-2004 |
Technical specifications for environmental monitoring of groundWater |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 15-2007 |
Technical requirement for environmental protection product. Supersonic flowmeters of wasteWater |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 15-1996 |
Supersonic flowmeter of wasteWater |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 132-2003 |
High-chlorine wasteWater. Determination of chemical oxygen demand. Potassium iodide alkaline Permanganate method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 104-2003 |
The technical requirement for Water quality automatic analyzer of total organic carbon |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 103-2003 |
The technical reqirement for Water quality automatic ananlyzer of total phosphorous |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 102-2003 |
The technical requirement for Water quality automatic ananlyzer of total nitrogen |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 101-2003 |
The technical requirement for Water quality automatic analyzer of ammonia |
Water
China Environmental Protection Industry
Standards |
|
|
HJ/T 100-2003 |
The technical requirement for Water quality automatic ananlyzer of permanganate index |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 84-2016 |
(Determination of Water Inorganic Anions (F-, Cl-, NO2-, Br-, NO3-, PO43-, SO32-, SO42-) Ion Chromatography) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 816-2016 |
(Radiochemical analysis of cesium - 137 in Water and biological samples) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 815-2016 |
(Radiochemical analysis of strontium - 90 in Water and biological samples) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 814-2016 |
(Radiochemical analysis of plutonium in Water and soil samples) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 813-2016 |
(Analysis of polonium - 210 in Water) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 812-2016 |
(Determination of Water Soluble Cations (Li +, Na +, NH4 +, K +, Ca2 +, Mg2 +) Ion Chromatography) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 811-2016 |
Water quality. Determination of total selenium.3, 3′-Diaminobenzidine spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 810-2016 |
(Water quality - Determination of volatile organic compounds - Headspace/gas chromatography - mass spectrometry) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 809-2016 |
(Water quality - Determination of nitrosamines - Gas chromatographic method) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 806-2016 |
(Water quality - Determination of acrylonitrile and acrolein purge and trap / GC) |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 800-2016 |
Ambient air-Determination of the Water soluble cations (Li+, Na+, NH4+, K+, Ca2+, Mg2+) from atmospheric particles-Ion chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2007-2010 |
Technical specifications for floatation process in wasteWater treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 798-2016 |
Specifications test methods for automatic/on-line monitor of total chromium in Water |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 789-2016 |
Water quality. Determination of Acetonitrile. Direct injection /Gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 788-2016 |
Water quality. Determination of Acetonitriie. Purge and Trap/Gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 778-2015 |
Water quality. Determination of iodide. Ion chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 776-2015 |
Water quality. Determination of 32 elements. Inductively coupled plasma optical emission spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 775-2015 |
Water quality. Ascarid ova determination. Nature sedimentation method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 774-2015 |
Technical guideline for the environmental protection status assessment of the centralized drinking Water sources |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 773-2015 |
Environmental protection technical requirement for standardized construction of the centralized drinking Water sources |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 770-2015 |
Water quality. Determination of Phenoxy carboxylic acids herbicide by High Performance Liquid Chromatography. Tandem Mass Spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 77.1-2008 |
Water Determination of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). Isotope dilution HRGC-HRMS |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 764-2015 |
Specifications and test procedures for automatic/on-line monitoring of arsenic in Water |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 763-2015 |
Specifications and test procedures for automatic/on-line monitoring of cadmium in Water |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 762-2015 |
Specifications and test procedures for automatic/on-line monitoring of Lead in Water |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 758-2015 |
Water quality. Determination of haloacetic acids. Gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 757-2015 |
Water quality. Determination of chromium. Flame atomic absorption spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 756-2015 |
Water quality. Determination of butyl xanthate. UV spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 755-2015 |
Water quality. Determination of total coliforms and fecal coliforms. Paper strip method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 754-2015 |
Water quality. Determination of atrazine by Gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 753-2015 |
Water quality. Determination of chlorothalonil and pyrethroid insecticides. Gas chromatography mass spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 748-2015 |
Water quality. Deterination of Thallium. Graphite furnace absorption Aectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 747-2015 |
Specification on Coding of the Centralized Drinking Water Source |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 744-2015 |
Water quality. Determination of phenols compounds. Gas chromatography mass spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 731-2014 |
Specification for automated Water quality monitoring in coastal area |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 716-2014 |
Water qualiy. Determination of nitroaromatics. Gas chromatography mass spactrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 715-2014 |
Water quality. Determination of polychlorinated biphenyls (PCBs). Gas chromatography mass spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 710.8-2014 |
Technical guidelines for biodiversity monitoring freshWater benthic macroinvertebrates |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 710.7-2014 |
Technical guidelines for biodiversity monitoring. i nland Water fish |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 701-2014 |
Water quality. Determination of yellow phosphorus. Gas chromatography method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 700-2014 |
Water quality. Determination of 65 elements. Inductively coupled plasma-mass spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 699-2014 |
Water quality. Determination of organochlorine pesticides and chlorobenzenes. Gas chromatography mass spectrometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 698-2014 |
Water quality. Determination of chlorothalonil and deltamethrin. Gas chromatography method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 697-2014 |
Water quality. Determination of acrylamide. Gas chromatography method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 696-2014 |
Water quality. Determination of turpentine. Gas chromatography method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2006-2010 |
Technical specifications for coagulation and flocculation process in wasteWater treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 686-2014 |
Water quality. Determination of volatile organic compounds. Purge and trap/gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 678-2013 |
Water quality. Digestion of total metals. Microwave assisted acid digestion method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 677-2013 |
Water quality. Digestion of total metals. Nitric acid digestion method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 676-2013 |
Water quality. Determination of phenolic compounds. Liquid liquid extraction gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 674-2013 |
Water quality. Determination of hydrazine and monomethyl hydrazine by p-Dimethylaminobenzaldehyde spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 673-2013 |
Water quality. Determination of vanadium by graphite furnace atomic absorption spectrometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 671-2013 |
Water quality. Determination of total phosphorus. Flow injection Analysis(FIA) and Ammonium molybdate spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 670-2013 |
Water quality. Determination of orthophosphate and total phosphorus. Continuous flow analysis(CFA) and Ammonium molybdate spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 669-2013 |
Water quality. Determination of phosphate. Ion chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 668-2013 |
Water quality. Determination of total nitrogen by flow injection analysis(FIA) and N-(1-naphthyl)ethylene diamine dihydrochloride spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 667-2013 |
Water quality. Determination of total nitrogen by continuous flow analysis(CFA) and N-(1-naphthyl)ethylene diamine dihydrochloride spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 666-2013 |
Water quality. Determination of ammonium nitrogen by flow injection analysis (FIA) and Salicylic acid spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 665-2013 |
Water quality. Determination of ammonium nitrogen by continuous flow analysis (CFA) and Salicylic acid spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2005-2010 |
Technical specification of constructed wetlands for wasteWater treatment engineering |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 659-2013 |
Water quality. Determination of cyanide and others by vaccum testing tube-electric colorimeter |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2004-2010 |
Technical specifications for slaughterhouse and meat processing wasteWater treatment projects |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2003-2010 |
Technical specifications for tannery industry wasteWater treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 648-2013 |
Water quality. Determination of nitroaromatics by gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 639-2012 |
Water quality. Determination of volatile organic compounds. Purge and trap/gas chromatography-mass spectrometer |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 637-2012 |
Water quality. Determination of petroleum oils and animal and vegetable oils. Infrared spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 2002-2010 |
Technical specifications for electroplating industry wasteWater treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 635-2012 |
Soil. Determination of Water-soluble and acid-soluble sulfate. Gravimetric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 621-2011 |
Water quality. Determination of chlorobenzenes. Gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 620-2011 |
Water quality. Determination of volatile halogenated organic compounds. Headspace gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 613-2011 |
Soil. Determination of dry matter and Water content. Gravimetric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 610-2016 |
Technical guidelines for environmental impact assessment. GroundWater environment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 610-2011 |
Technical guidelines for environmental impact assessment. GroundWater environment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 603-2011 |
Water quality. Determination of barium. Flame atomic absorption spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 602-2011 |
Water quality. Determination of barium. Graphite furnace atomic absorption spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 601-2011 |
Water quality. Determination of formaldehyde. Acetylacetone spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 600-2011 |
Water quality. Determination of TNT, RDX, DNT. Gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 599-2011 |
Water quality. Determination of TNT. N-cetyl pridinium chloride. Sodium sulfite Spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 598-2011 |
Water quality. Determination of TNT. Sodium sulfite spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 597-2011 |
Water quality. Determination of total mercury. Cold atomic absorption spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 596.7-2010 |
Water quality. Vocabulary. Part 7 |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 596.6-2010 |
Water quality. Vocabulary. Part 6 |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 596.5-2010 |
Water quality. Vocabulary. Part 5 |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 596.4-2010 |
Water quality. Vocabulary. Part 4 |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 596.3-2010 |
Water quality. Vocabulary. Part 3 |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 596.2-2010 |
Water quality. Vocabulary. Part 2 |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 596.1-2010 |
Water quality. Vocabulary. Part 1 |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 595-2010 |
Water quality. Determination of the total amount of the color developing agent. 169 coupler spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 594-2010 |
Water quality. Determination of the total amount of the developing agent and their oxides. Iodine-starch spectrophotometry |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 593-2010 |
Water quality. Determination of phosphorus. Phosphomolybdenum blue spectrophotometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 592-2010 |
Water quality. Determination of nitrobenzene-compounds by gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 591-2010 |
Water quality. Determination of pentachlorophenol by gas chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 587-2010 |
Water quality. Determination of Atrazine. High performance liquid chromatography |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 586-2010 |
Water quality. Determination of free chlorine and total chlorine. Spectrophotonetric method using N, N-diethyl-1, 4-phenylenediamine |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 585-2010 |
Water quality. Determination of free chlorine and total chlorine. Titrimetric method using N, N-diethyl-1, 4-phenylenediamine |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 580-2010 |
Technical sperifications for oil-contained wasteWater treating process |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 579-2010 |
Technical specifications for membrane separation process in wasteWater treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 575-2010 |
Technical specifications for brewing industry wasteWater treatment |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 551-2016 |
Water quality-Determination of chlorine dioxide and chlorite-Continuous iodometric method |
Water
China Environmental Protection Industry
Standards |
|
|
HJ 551-2009 |
Water quality. Determination of chlorin dioxide. Iodometric method |
Water
China Environmental Protection Industry
Standards |
|
Cart:
+86-755-25831330
