| Standard Code |
Standard Title |
Standard Class |
Order |
|
GB 9706.205-2020 |
Medical electrical equipment—Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic phYSiotherapy equipment |
YS
China GB-National
Standards |
 |
|
GB/T 3044-2020 |
Chemical analYSis methods for white fused alumina and pink fused alumina |
YS
China GB-National
Standards |
|
|
GB/T 4688-2020 |
Paper，board and pulp—AnalYSis of fiber furnish |
YS
China GB-National
Standards |
|
|
GB/T 20975.37-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 37:Determination of niobium content |
YS
China GB-National
Standards |
|
|
GB/T 28963-2020 |
Ships and marine technology—Fire-extinguishing sYStems for protection of galley cooking equipment |
YS
China GB-National
Standards |
|
|
GB/T 38846-2020 |
Smart factory—Industrial automation sYStems engineering role class libraries |
YS
China GB-National
Standards |
|
|
GB/T 38848-2020 |
Intelligent factory—Technical requirements of process industry energy management sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38852.1-2020 |
Industrial-process measurement, control and automation—Evaluation of sYStem properties for the purpose of system assessment—Part 1: Terminology and basic concepts |
YS
China GB-National
Standards |
|
|
GB/T 38852.2-2020 |
Industrial-process measurement, control and automation—Evaluation of sYStem properties for the purpose of system assessment—Part 2: Assessment methodology |
YS
China GB-National
Standards |
|
|
GB/T 38870-2020 |
General specifications of slicing robots sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38905-2020 |
Type designation for civil unmanned aircraft sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38909-2020 |
Electromagnetic compatibility requirements and test methods for civil small and light unmanned aircraft sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38911-2020 |
General requirements for flight control sYStems of civil small and light unmanned helicopter |
YS
China GB-National
Standards |
|
|
GB/T 38924.10-2020 |
Environmental test methods for civil small and light unmanned aircraft sYStem—Part 10: Sand and dust test |
YS
China GB-National
Standards |
|
|
GB/T 38924.1-2020 |
Environmental test methods for civil small and light unmanned aircraft sYStem—Part 1: General principles |
YS
China GB-National
Standards |
|
|
GB/T 38924.2-2020 |
Environmental test methods for civil small and light unmanned aircraft sYStem—Part 2: Low-temperature test |
YS
China GB-National
Standards |
|
|
GB/T 38924.3-2020 |
Environmental test methods for civil small and light unmanned aircraft sYStem—Part 3: High-temperature test |
YS
China GB-National
Standards |
|
|
GB/T 38924.4-2020 |
Environmental test methods for civil small and light unmanned aircraft sYStem—Part 4: Temperature and altitude test |
YS
China GB-National
Standards |
|
|
GB/T 38924.5-2020 |
Environmental test methods for civil small and light unmanned aircraft sYStem—Part 5: Shock test |
YS
China GB-National
Standards |
|
|
GB/T 38924.6-2020 |
Environmental test methods for civil small and light unmanned aircraft sYStem—Part 6: Vibration test |
YS
China GB-National
Standards |
|
|
GB/T 38924.7-2020 |
Environmental test methods for civil small and light unmanned aircraft sYStem—Part 7: Humidity test |
YS
China GB-National
Standards |
|
|
GB/T 38924.8-2020 |
Environmental test methods for civil small and light unmanned aircraft sYStem—Part 8: Salt spray test |
YS
China GB-National
Standards |
|
|
GB/T 38924.9-2020 |
Environmental test methods for civil small and light unmanned aircraft sYStem—Part 9: Waterproofness test |
YS
China GB-National
Standards |
|
|
GB/T 38930-2020 |
Requirements and test methods of the capability of wind resistance for civil small and light unmanned aircraft sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38931-2020 |
General requirements for safety of civil small and light unmanned aircraft sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38943.1-2020 |
Earth-moving machinery—Electrical safety of machines utilizing electric drives and related components and sYStems—Part 1: General requirements |
YS
China GB-National
Standards |
|
|
GB/T 38943.2-2020 |
Earth-moving machinery—Electrical safety of machines utilizing electric drives and related components and sYStems—Part 2:Particular requirements for externally-powered machines |
YS
China GB-National
Standards |
|
|
GB/T 38943.3-2020 |
Earth-moving machinery—Electrical safety of machines utilizing electric drives and related components and sYStems—Part 3:Particular requirements for self-powered machines |
YS
China GB-National
Standards |
|
|
GB/T 38951-2020 |
S-VISSR data receiving sYStem of geostationary meteorological satellites |
YS
China GB-National
Standards |
|
|
GB/T 38993-2020 |
Guide for control strategy of active and reactive power control sYStem for photovoltaic power station |
YS
China GB-National
Standards |
|
|
GB/T 38996-2020 |
General requirements for the flight control sYStem of civil small and light fixed wing unmanned aircraft |
YS
China GB-National
Standards |
|
|
GB/T 38997-2020 |
General requirements for the flight control and navigation sYStem of small and light multi-rotor unmanned aircraft |
YS
China GB-National
Standards |
|
|
GB/T 39017-2020 |
Consumer product traceability—General requirements for traceability sYStem |
YS
China GB-National
Standards |
|
|
GB/T 39021-2020 |
Intelligent lighting sYStems—General requirements |
YS
China GB-National
Standards |
|
|
GB/T 39022-2020 |
Lighting sYStem and related equipment—Terms and definitions |
YS
China GB-National
Standards |
|
|
GB/T 39030-2020 |
Technical specification of phYSiological activity evaluation for enzyme preparations |
YS
China GB-National
Standards |
|
|
GB/T 39035-2020 |
Code of practice for redundant design and test of redundant dynamic positioning sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38969-2020 |
Guide on technology for power sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38960-2020 |
Cryogenic-resistant controlled expansion alloYS |
YS
China GB-National
Standards |
|
|
GB/T 38954-2020 |
Hydrogen fuel cell power sYStem for unmanned aerial vehicles |
YS
China GB-National
Standards |
|
|
GB/T 38946-2020 |
Specification of centralized operation and maintenance for distributed photovoltaic power sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38940-2020 |
Precision expansion alloYS for sealing to silicon and silicon components |
YS
China GB-National
Standards |
|
|
GB/T 38932-2020 |
Aircraft environment control sYStem terminology |
YS
China GB-National
Standards |
|
|
GB/T 38921-2020 |
Specification of steam turbine safty protection sYStem for thermal power plant |
YS
China GB-National
Standards |
|
|
GB/T 38907-2020 |
Water saving enterprises—PolYSilicon industry |
YS
China GB-National
Standards |
|
|
GB/T 38904-2020 |
Methods for elemental analYSis of ceramic liquid pigments |
YS
China GB-National
Standards |
|
|
GB/T 38903-2020 |
Technical guideline for material flow analYSis of industrial parks |
YS
China GB-National
Standards |
|
|
GB/T 38902-2020 |
Determination of hollow fiber membrane cross-section dimensions—Image analYSis method |
YS
China GB-National
Standards |
|
|
GB/T 38899-2020 |
Implementation guidance for energy management sYStem in chemical industry |
YS
China GB-National
Standards |
|
|
GB/T 38893-2020 |
Industrial trucks—Safety monitoring sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38892-2020 |
On-board driving video recording sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38889-2020 |
Antennas and reception sYStems for radio interference—Antenna measurement—Vehicle antennas and system |
YS
China GB-National
Standards |
|
|
GB/T 38879-2020 |
Particle—Size analYSis—Color image analysis methods |
YS
China GB-National
Standards |
|
|
GB/T 38878-2020 |
SYStem tests for the projects of high-voltage direct current (HVDC) transmission power using voltage sourced converters (VSC) |
YS
China GB-National
Standards |
|
|
GB/T 38874.4-2020 |
Tractors and machinery for agriculture and forestry—Safety-related parts of control sYStems—Part 4：Production,operation,modification and supporting processes |
YS
China GB-National
Standards |
|
|
GB/T 38874.3-2020 |
Tractors and machinery for agriculture and forestry—Safety-related parts of control sYStems—Part 3: Series development，hardware and software |
YS
China GB-National
Standards |
|
|
GB/T 38874.2-2020 |
Tractors and machinery for agriculture and forestry—Safety-related parts of control sYStems—Part 2: Concept phase |
YS
China GB-National
Standards |
|
|
GB/T 38874.1-2020 |
Tractors and machinery for agriculture and forestry—Safety-related parts of control sYStems—Part 1：General principles for design and development |
YS
China GB-National
Standards |
|
|
GB/T 38853-2020 |
Performance requirements of monitoring and measuring sYStems used for data collection and analysis |
YS
China GB-National
Standards |
|
|
GB/T 38844-2020 |
Smart factory—General specification for time synchronization, time management and test in industry automation sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38833-2020 |
240V/336V DC power sYStem technical requirements and test methods for information and telecommunication |
YS
China GB-National
Standards |
|
|
GB/T 38831-2020 |
Technical requirements for IPTV media delivery sYStem—Media distribution and storage subsystem |
YS
China GB-National
Standards |
|
|
GB/T 38830-2020 |
Technical requirements for IPTV media delivery sYStem—Global load balance subsystem |
YS
China GB-National
Standards |
|
|
GB/T 38829-2020 |
Technical requirements for IPTV media delivery sYStem—Content access |
YS
China GB-National
Standards |
|
|
GB/T 38828-2020 |
Technical requirements for IPTV media delivery sYStem—Use cases and requirements |
YS
China GB-National
Standards |
|
|
GB/T 38827-2020 |
Technical requirements for IPTV media delivery sYStem—Functional architecture |
YS
China GB-National
Standards |
|
|
GB/T 38826-2020 |
Technical requirements for IPTV media delivery sYStem—General requirements |
YS
China GB-National
Standards |
|
|
GB/T 38803-2020 |
Specification for failure analYSis of steel wire ropes |
YS
China GB-National
Standards |
|
|
GB/T 38754-2020 |
Technical requirements for IPTV media delivery sYStem—Streaming media services |
YS
China GB-National
Standards |
|
|
GB/T 31309-2020 |
Calculation of electron vacancy number in cast superalloYS |
YS
China GB-National
Standards |
|
|
GB/T 29311-2020 |
Electrical insulating materials and sYStems—AC voltage endurance evaluation |
YS
China GB-National
Standards |
|
|
GB/T 27788-2020 |
Microbeam analYSis—Scanning electron microscopy—Guidelines for calibrating image magnification |
YS
China GB-National
Standards |
|
|
GB/T 22578.3-2020 |
Electrical insulation sYStem (EIS)—Thermal evaluation of combined liquid and solid components—Part 3:Hermetic motor-compressors |
YS
China GB-National
Standards |
|
|
GB/T 20975.4-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 4:Determination of iron content |
YS
China GB-National
Standards |
|
|
GB/T 20975.5-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 5：Determination of silicon content |
YS
China GB-National
Standards |
|
|
GB/T 20975.7-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 7:Determination of manganese content |
YS
China GB-National
Standards |
|
|
GB/T 20975.9-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 9:Determination of lithium content—Flame atomic absorption spectrometry |
YS
China GB-National
Standards |
|
|
GB/T 20975.10-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 10：Determination of tin content |
YS
China GB-National
Standards |
|
|
GB/T 20975.12-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 12: Determination of titanium content |
YS
China GB-National
Standards |
|
|
GB/T 20975.14-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 14：Determination of nickel content |
YS
China GB-National
Standards |
|
|
GB/T 20975.16-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 16：Determination of magnesium content |
YS
China GB-National
Standards |
|
|
GB/T 20975.18-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 18:Determination of chromium content |
YS
China GB-National
Standards |
|
|
GB/T 20975.22-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 22:Determination of beryllium content |
YS
China GB-National
Standards |
|
|
GB/T 20975.24-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 24：Determination of total rare earth content |
YS
China GB-National
Standards |
|
|
GB/T 20975.25-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 25：Determination of elements content—Inductively coupled plasma atomic emission spectrometric method |
YS
China GB-National
Standards |
|
|
GB/T 20975.35-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 35:Determination of tungsten content—Thiocyanate spectrophotometric method |
YS
China GB-National
Standards |
|
|
GB/T 20975.36-2020 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 36:Determination of silver content—Flame atomic absorption spectrometry |
YS
China GB-National
Standards |
|
|
GB/T 20671.1-2020 |
Classification sYStem and test methods for nonmetallic gasket materials—Part 1：Standard classification system for nonmetallic gasket materials |
YS
China GB-National
Standards |
|
|
GB/T 20671.3-2020 |
Classification sYStem and test methods for nonmetallic gasket materials—Part 3: Standard test method for fluid resistance of gasket materials |
YS
China GB-National
Standards |
|
|
GB/T 20671.5-2020 |
Classification sYStem and test methods for nonmetallic gasket materials—Part 5: Standard test method for creep relaxation of gasket materials |
YS
China GB-National
Standards |
|
|
GB/T 20671.6-2020 |
Classification sYStem and test methods for nonmetallic gasket materials—Part 6: Standard test method for adhesion of gasket materials to metal surfaces |
YS
China GB-National
Standards |
|
|
GB/T 20111.5-2020 |
Electrical insulation sYStems—Procedures for thermal evaluation—Part 5: Applications with a designed life of 5000h or less |
YS
China GB-National
Standards |
|
|
YS/T 575.21-2007 |
Methods for chemical analYSis of bauxite Part 21:Determination of organic carbon content titrimetric method |
YS
China YS-Non-ferrous Metal
Standards |
|
|
GB/T 17360-2020 |
Microbeam analYSis—Method of quantitative determination for low contents of silicon and manganese in steels using electron probe microanalyzer |
YS
China GB-National
Standards |
|
|
GB/T 2900.103-2020 |
Electrotechnical terminology—Generation,transmission and distribution of electrical energy—Dependability and quality of service of electric power sYStems |
YS
China GB-National
Standards |
|
|
GB/T 15343-2020 |
Methods for chemical analYSis of talc |
YS
China GB-National
Standards |
|
|
GB/T 14598.301-2020 |
Technical requirements for power sYStem continuous recorder |
YS
China GB-National
Standards |
|
|
GB/T 14513.3-2020 |
Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 3:Method for calculating steady-state flow-rate characteristics of sYStems |
YS
China GB-National
Standards |
|
|
GB/T 12967.1-2020 |
Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloYS―Part 1: Measurement of abrasion resistance |
YS
China GB-National
Standards |
|
|
GB/T 39002-2020 |
Guidance on individual dining sYStem in catering service |
YS
China GB-National
Standards |
|
|
GA/T 1708-2020 |
Thermal image equipment used for video surveillance in securiy sYStems |
YS
China GA/T Comprehensive
Standards |
|
|
YS/T 820.8-2012 |
Methods for chemical analYSis of laterite nickel ores—Part 8:Determination of silica content—Potassium silicafluoride titrimetric method |
YS
China YS-Non-ferrous Metal
Standards |
|
|
GB/T 5252-2020 |
Test method for dislocation density of monocrYStal germanium |
YS
China GB-National
Standards |
|
|
GB/T 38744-2020 |
Methods for chemical analYSis of synergistic catalysis elements in automotive exhaust catalysis－Determination of cerium, lanthanum, praseodymium, neodymium ,barium and zirconium contents－Inductively coupled plasma atomic emission spectrometry |
YS
China GB-National
Standards |
|
|
GB/T 38737-2020 |
Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion sYStems—Method by measurement of biogas production |
YS
China GB-National
Standards |
|
|
GB/T 38676-2020 |
Information technology—Big data—Functional testing requirements for storage and processing sYStems |
YS
China GB-National
Standards |
|
|
GB/T 38675-2020 |
Information technology—General requirements for big data computing sYStems |
YS
China GB-National
Standards |
|
|
GB/T 38673-2020 |
Information technology—Big data—Basic requirements for big data sYStems |
YS
China GB-National
Standards |
|
|
GB/T 38671-2020 |
Information security technology—Technical requirements for remote face recognition sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38670-2020 |
Intelligent manufacturing—Radio frequency identification sYStem—Tag data format |
YS
China GB-National
Standards |
|
|
GB/T 38669-2020 |
Internet of things—General technical requirements for mine production line intelligent supervisory sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38668-2020 |
Intelligent manufacturing－Radio frequency identification sYStem—General technical requirements |
YS
China GB-National
Standards |
|
|
GB/T 38665.2-2020 |
Information technology—Gesture interaction sYStem—Part 2: System external interface |
YS
China GB-National
Standards |
|
|
GB/T 38665.1-2020 |
Information technology—Gesture interaction sYStem—Part 1: General technical requirements |
YS
China GB-National
Standards |
|
|
GB/T 38643-2020 |
Information technology—Big data—Functional testing requirements for analytic sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38641-2020 |
Information technology—Telecommunications and information exchange between sYStems—Media access control and physical layer specifications for low power wide area network |
YS
China GB-National
Standards |
|
|
GB/T 38634.4-2020 |
SYStems and software engineering—Software testing—Part 4：Test techniques |
YS
China GB-National
Standards |
|
|
GB/T 38634.3-2020 |
SYStems and software engineering—Software testing—Part 3: Test documentation |
YS
China GB-National
Standards |
|
|
GB/T 38634.2-2020 |
SYStems and software engineering—Software testing—Part 2：Test processes |
YS
China GB-National
Standards |
|
|
GB/T 38634.1-2020 |
SYStems and software engineering—Software testing—Part 1:Concepts and definitions |
YS
China GB-National
Standards |
|
|
GB/T 38628-2020 |
Information security technology—Cybersecurity guide for automotive electronics sYStems |
YS
China GB-National
Standards |
|
|
GB/Z 38623-2020 |
Intelligent manufacturing—Human-computer interaction sYStem—Technological requirements of semantic library |
YS
China GB-National
Standards |
|
|
GB/T 38618-2020 |
Information technology—Telecommunications and information exchange between sYStems—Specification for high reliability and low latency wireless network communication protocol |
YS
China GB-National
Standards |
|
|
GB/T 37414.2-2020 |
Electrical equipment and sYStem of industrial robot—Part 2: Requirements for AC servo driver device |
YS
China GB-National
Standards |
|
|
GB/T 37414.3-2020 |
Electrical equipment and sYStem of industrial robot—Part 3 : Requirements for AC servo motor |
YS
China GB-National
Standards |
|
|
GB/T 30428.8-2020 |
Information sYStem for digitized supervision and management of city—Part 8: Register, treatment and closed for supervision cases |
YS
China GB-National
Standards |
|
|
GB/T 30284-2020 |
Information security techniques－Security technical requirements for operating sYStem on smart mobile terminal
|
YS
China GB-National
Standards |
|
|
GB/T 38838-2020 |
Technical specification for construction of rural household latrine connected to a sewer sYStem |
YS
China GB-National
Standards |
|
|
GB/T 28454-2020 |
Information technology－Security techniques－Selection, deployment and operation of intrusion detection and prevention sYStems(IDPS) |
YS
China GB-National
Standards |
|
|
GB/T 25067-2020 |
Information technology—Security techniques—Requirements for bodies providing audit and certification of information security management sYStems |
YS
China GB-National
Standards |
|
|
GB/T 19724-2020 |
Forestry machinery—Portable chain-saws and brush-cutters—Exhaust sYStem-caused fire risk |
YS
China GB-National
Standards |
|
|
GB/T 16145-2020 |
Gamma spectrometry method of analYSing radionuclides in biological samples |
YS
China GB-National
Standards |
|
|
GB/T 12729.3-2020 |
Spices and condiments—Preparation of a ground sample for analYSis |
YS
China GB-National
Standards |
|
|
GB/T 11357-2020 |
Quality, roughness and balance of transmission pulleYS |
YS
China GB-National
Standards |
|
|
GB/T 4334-2020 |
Corrosion of metals and alloYS－Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels |
YS
China GB-National
Standards |
|
|
GB/T 3286.10-2020 |
Methods for chemical analYSis of limestone and dolornite一Part 10:Determination of titanium dioxide content一Diantipyrylmethane spectrophotometric method |
YS
China GB-National
Standards |
|
|
GB/T 1800.2-2020 |
Geometrical product specifications (GPS)—ISO code sYStem for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
YS
China GB-National
Standards |
|
|
GB/T 1800.1-2020 |
Geometrical product specifications (GPS)—ISO code sYStem for tolerances on linear sizes—Part 1: Basis of tolerances, deviations and fits |
YS
China GB-National
Standards |
|
|
GB/T 38710-2020 |
Guideline for oil and gas transmission pipeline geographic information sYStem development |
YS
China GB-National
Standards |
|
|
GB/T 38706-2020 |
Implementation guidance for energy management sYStems in ceramics industry |
YS
China GB-National
Standards |
|
|
GB/T 38704-2020 |
Frame sYStem of timber supporting curtain wall |
YS
China GB-National
Standards |
|
|
GB/T 38702-2020 |
Security management sYStems for the supply chain—Best practices for implementing supply chain security, assessments and plans—Requirements and guidance |
YS
China GB-National
Standards |
|
|
GB/T 38701-2020 |
Security management sYStems for the supply chain—Requirements for bodies providing audit and certification of supply chain security management systems |
YS
China GB-National
Standards |
|
|
GB/T 38700-2020 |
Data element of special equipment traceability sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38691-2020 |
Testing method for specific surface area of petroleum refining catalYSts |
YS
China GB-National
Standards |
|
|
GB/T 38684-2020 |
Metallic materials—Sheet and strip—Biaxial stress-strain curve by means of bulge test—Optical measuring sYStems |
YS
China GB-National
Standards |
|
|
GB/T 38680-2020 |
Technical guidelines for central heating sYStem using low grade industrial surplus heat |
YS
China GB-National
Standards |
|
|
GB/T 38677-2020 |
Gas analYSis—Measurement procedure and result—Technical requirements for calibration |
YS
China GB-National
Standards |
|
|
GB/T 38663-2020 |
Identification sYStem for internet of things—Middleware standard for Ecode identification system |
YS
China GB-National
Standards |
|
|
GB/T 38662-2020 |
Identification sYStem for internet of things—Guideline for Ecode identification applications |
YS
China GB-National
Standards |
|
|
GB/T 38661-2020 |
Technical specifications of battery management sYStem for electric vehicles |
YS
China GB-National
Standards |
|
|
GB/T 38660-2020 |
Identification sYStem for internet of things—Security mechanism for Ecode identification system |
YS
China GB-National
Standards |
|
|
GB/T 38656-2020 |
Communication protocol technical specification of special equipment IoT sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38655-2020 |
Public information guidance sYStems—Ergonomic guideline for design and setting |
YS
China GB-National
Standards |
|
|
GB/T 38654-2020 |
Public information guidance sYStems—Guidelines for planning and design |
YS
China GB-National
Standards |
|
|
GB/T 38650-2020 |
Safety information markings of piping sYStems—Design principles and requirements |
YS
China GB-National
Standards |
|
|
GB/T 38606-2020 |
Identification sYStem for internet of things—Data content identifier |
YS
China GB-National
Standards |
|
|
GB/T 38605-2020 |
Emergency guidance sYStems—Graphical symbols for evacuation and shelter |
YS
China GB-National
Standards |
|
|
GB/T 38604.4-2020 |
Public information guidance sYStems—Assessment requirement—Part 4: Trolley and bus station |
YS
China GB-National
Standards |
|
|
GB/T 38604.3-2020 |
Public information guidance sYStems—Assessment requirement—Part 3: Urban rail transit station |
YS
China GB-National
Standards |
|
|
GB/T 38604.2-2020 |
Public information guidance sYStems—Assessment requirement—Part 2: Railway passenger station |
YS
China GB-National
Standards |
|
|
GB/T 38604.1-2020 |
Public information guidance sYStems—Assessment requirement—Part 1: General |
YS
China GB-National
Standards |
|
|
GB/T 38596-2020 |
Determination method of heavy metal contents in the wastewater during catalYSt production |
YS
China GB-National
Standards |
|
|
GB/T 31523.3-2020 |
Safety information identification sYStems—Part 3: Design principles and requirements |
YS
China GB-National
Standards |
|
|
GB/T 27021.6-2020 |
Conformity assessment—Requirements for bodies providing audit and certification of management sYStems—Part 6：Competence requirements for auditing and certification of business continuity management systems |
YS
China GB-National
Standards |
|
|
GB/T 23809.3-2020 |
Emergency guidance sYStem—Setting principles and requirements—Part 3: Personnel shelter |
YS
China GB-National
Standards |
|
|
GB/T 23809.2-2020 |
Emergency guidance sYStems—Setting principles and requirements—Part 2: Outside buildings |
YS
China GB-National
Standards |
|
|
GB/T 23809.1-2020 |
Emergency guidance sYStems—Setting principles and requirements—Part 1: Inside buildings |
YS
China GB-National
Standards |
|
|
GB/T 18916.47-2020 |
Norm of water intake—Part 47: PolYSilicon production |
YS
China GB-National
Standards |
|
|
GB/T 6041-2020 |
General rules for mass spectrometric analYSis |
YS
China GB-National
Standards |
|
|
GB/T 3190-2020 |
Chemical composition of wrought aluminium and aluminium alloYS |
YS
China GB-National
Standards |
|
|
GB/T 15566.3-2020 |
Public information guidance sYStems—Setting principles and requirements—Part 3: Railway passenger station |
YS
China GB-National
Standards |
|
|
GB/T 15566.1-2020 |
Public information guidance sYStem—Setting principles and requirements—Part 1: General principles |
YS
China GB-National
Standards |
|
|
GB/T 16857.901-2020 |
Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing sYStem |
YS
China GB-National
Standards |
|
|
GB/T 51397-2019 |
Design standard for VSC-HVDC sYStem |
YS
China GB-National
Standards |
|
|
GB 50166-2019 |
Code for installation and acceptance of fire alarm sYStem |
YS
China JG - Building Industry
Standards |
|
|
GB/T 23605-2020 |
Determination of β transus temperature of titanium alloYS |
YS
China GB-National
Standards |
|
|
GB/T 5168-2020 |
Microstructure and macrostructure examination for titanium and titanium alloYS |
YS
China GB-National
Standards |
|
|
GB/T 4698.10-2020 |
Methods for chemical analYSis of titanium sponge, titanium and titanium alloys—Part 10：Determination of chromium content—Ammonium ferrous sulfate titration and inductively coupled plasma atomic emission spectrometry（with vanadium） |
YS
China GB-National
Standards |
|
|
GB/T 45001-2020 |
Occupational health and safety management sYStems—Requirements with guidance for use |
YS
China GB-National
Standards |
|
|
GB/T 38582-2020 |
Specifications for assessment of forest ecosYStem services |
YS
China GB-National
Standards |
|
|
GB/T 38561-2020 |
Information security technology—Technical requirements for cybersecurity management support sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38557.1-2020 |
SYStems and software engineering—Interface and data exchange—Part 1:Interface specification for enterprise resource planning system and manufacturing execution system |
YS
China GB-National
Standards |
|
|
GB/T 38553-2020 |
Requirements for energy saving management of industrial boiler sYStems |
YS
China GB-National
Standards |
|
|
GB/T 38538-2020 |
Index sYStem and assessment method for greenization of the industrial park infrastructure |
YS
China GB-National
Standards |
|
|
GB/T 38532-2020 |
Microbeam analYSis—Electron backscatter diffraction—Measurement of average grain size |
YS
China GB-National
Standards |
|
|
GB/T 38531-2020 |
Microbeam analYSis—Computed tomography (CT) method for micro- and nano-pore structure analysis in tight rock samples |
YS
China GB-National
Standards |
|
|
GB/T 38526-2020 |
Titanium tubes for aerospace propulsion sYStem |
YS
China GB-National
Standards |
|
|
GB/T 38521-2020 |
Gas analYSis—Purity analysis and the treatment of purity data |
YS
China GB-National
Standards |
|
|
GB/T 38519-2020 |
Fire alarm sYStem for rolling stock |
YS
China GB-National
Standards |
|
|
GB/T 38517-2020 |
Particulate—Bioaerosols sampling and analYSis—General principles |
YS
China GB-National
Standards |
|
|
GB/T 38513-2020 |
Methods for chemical analYSis of niobium hafnium alloys—Determination of hafnium,titanium,zirconium,tungsten,tantalum contents—Inductively coupled plasma atomic emission spectrometry |
YS
China GB-National
Standards |
|
|
GB/T 38495-2020 |
Sensory analYSis—Sensory evaluation of Chinese pepper pungency intensity—Scoville index determination method |
YS
China GB-National
Standards |
|
|
GB/T 38493-2020 |
Sensory analYSis—Assessment (determination and verification) of the shelf life of foodstuffs |
YS
China GB-National
Standards |
|
|
GB/T 38447-2020 |
Micro-electromechanical sYStem technology—Fatigue testing method of MEMS structure using resonant vibration |
YS
China GB-National
Standards |
|
|
GB/T 38446-2020 |
Micro-electromechanical sYStem technology—Test methods for tensile property measurement of strip thin films |
YS
China GB-National
Standards |
|
|
GB/T 15076.6-2020 |
Methods for chemical analYSis of tantalum and niobium--Part 6: Determination of silicon content--Inductively coupled plasma atomic emission spectrometry |
YS
China GB-National
Standards |
|
|
GB/T 15076.4-2020 |
Methods for chemical analYSis of tantalum and niobium--Part 4: Determination of iron content--1, 10-Phenanthroline spectrophotometry |
YS
China GB-National
Standards |
|
|
GB/T 15076.11-2020 |
Methods for chemical analYSis of tantalum and niobium--Part 11: Determination of arsenic, antimony, lead, tin and bismuth contents in niobium--Direct current arc atomic emission spectrometry |
YS
China GB-National
Standards |
|
|
GB/T 14849.3-2020 |
Methods for chemical analYSis of silicon metal--Part 3: Determination of calcium content |
YS
China GB-National
Standards |
|
|
GB/T 14849.1-2020 |
Methods for chemical analYSis of silicon metal--Part 1: Determination of iron content |
YS
China GB-National
Standards |
|
|
GB/T 13747.4-2020 |
Methods for chemical analYSis of zirconium and zirconium alloys--Part 4: Determination of chromium content--Diphenylcarbazide spectrophotometry andinductively coupled plasma atomic emission spectrometry |
YS
China GB-National
Standards |
|
|
GB/T 13747.3-2020 |
Methods for chemical analYSis of zirconium and zirconium alloys--Part 3: Determination of nickel content--Dimethyglyoxime spectrophotometry andinductively coupled plasma atomic emission spectrometry |
YS
China GB-National
Standards |
|
|
GB/T 13747.27-2020 |
Methods for chemical analYSis of zirconium and zirconium alloys--Part 27: Determination of trace impurities content--Inductively coupled plasma mass spectrometry |
YS
China GB-National
Standards |
|
|
GB/T 38332-2019 |
Smart grid customer automatic demand response—Technical condition of central air conditioning sYStem terminal |
YS
China National
Standards |
|
|
GB/T 38329.1-2019 |
Utility connections in port—Part 1: High voltage shore connection (HVSC) sYStem—General requirements |
YS
China National
Standards |
|
|
GB/T 38324-2019 |
Health informatics—Semantic network framework of traditional Chinese medicine language sYStem |
YS
China National
Standards |
|
|
GB/T 38322-2019 |
Information technology—Information device interconnection—Interface requirements between third-party smart home electric sYStem and general terminal access service platform |
YS
China National
Standards |
|
|
GB/T 38320-2019 |
Information technology—Information device interconnection—Interface requirements between smart home electric sYStem terminals and general terminal access service platform |
YS
China National
Standards |
|
|
GB/T 38318-2019 |
Cyber security assessment guide for electric power sYStem supervision and control |
YS
China National
Standards |
|
|
GB/T 38311-2019 |
Communication protocols and interfaces of public security and protection sYStem in urban rail transit |
YS
China National
Standards |
|
|
GB/T 38309-2019 |
Toxicity testing of fire effluents—Guidance for analYSis of gases and vapours in fire effluents using FTIR gas analysis |
YS
China National
Standards |
|
|
GB/T 38299-2019 |
Societal security—Business continuity management sYStems—Guidelines for supply chain continuity |
YS
China National
Standards |
|
|
GB/T 38293-2019 |
Ships and marine technology—Computer applications—General principles for the development and use of programmable electronic sYStems in marine applications |
YS
China National
Standards |
|
|
GB/T 38286-2019 |
Polyethylene(PE)，polypropylene(PP) and polYStyrene(PS) resin―Determination of peroxide value |
YS
China National
Standards |
|
|
GB/T 38280-2019 |
Cable management sYStems—Specifications for conduit fittings and accessories for cable installations for extra heavy duty electrical steel conduit |
YS
China National
Standards |
|
|
GB/T 38276-2019 |
Lubrication sYStem—Terminology and graphical symbols |
YS
China National
Standards |
|
|
GB/T 38275-2019 |
Lubrication sYStem—Inspection specification |
YS
China National
Standards |
|
|
GB/T 38274-2019 |
Lubrication sYStem—Efficiency assessment method |
YS
China National
Standards |
|
|
GB/T 38273.1-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation sYStem and basis for specification |
YS
China National
Standards |
|
|
GB/T 38271-2019 |
Plastics—Determination of residual styrene monomer in polYStyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography |
YS
China National
Standards |
|
|
GB/T 38269-2019 |
Corrosion of metals and alloYS—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity |
YS
China National
Standards |
|
|
GB/T 38267-2019 |
Numerical control sYStem of machine tool—Programming code |
YS
China National
Standards |
|
|
GB/T 38266-2019 |
Numerical control sYStem of machine tool—General for reliability |
YS
China National
Standards |
|
|
GB/T 38255-2019 |
Requirements analYSis for space science experiments |
YS
China National
Standards |
|
|
GB/T 38254-2019 |
Automatic control device for fire alarm receiving and dispatching sYStem |
YS
China National
Standards |
|
|
GB/T 38253-2019 |
Integrity management sYStem of houseware enterprise—Requirements |
YS
China National
Standards |
|
|
GB/T 31843.450-2019 |
Maritime navigation and radiocommunication equipment and sYStems—Digital interfaces—Part 450：Multiple talkers and multiple listeners—Ethernet interconnection |
YS
China National
Standards |
|
|
GB/T 27422-2019 |
Conformity assessment—Requirements for bodies providing audit and certification of business continuity management sYStems |
YS
China National
Standards |
|
|
GB/T 27021.7-2019 |
Conformity assessment—Requirements for bodies providing audit and certification of management sYStems—Part 7: Competence requirements for auditing and certification of road traffic safety management systems |
YS
China National
Standards |
|
|
GB/T 26218.4-2019 |
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions—Part 4: Insulators for d.c. sYStems |
YS
China National
Standards |
|
|
GB/T 26217-2019 |
DC voltage measuring device for HVDC transmission sYStem |
YS
China National
Standards |
|
|
GB/T 26216.2-2019 |
DC current measuring device for HVDC transmission sYStem—Part 2：Electromagnetic DC current measuring device |
YS
China National
Standards |
|
|
GB/T 26216.1-2019 |
DC current measuring device for HVDC transmission sYStem—Part 1：Electronic DC current measuring device |
YS
China National
Standards |
|
|
GB/T 20899.3-2019 |
Methods for chemical analYSis of gold ores—Part 3:Determination of arsenic content |
YS
China National
Standards |
|
|
GB/T 20899.2-2019 |
Methods for chemical analYSis of gold ores一Part 2:Determination of silver content 一Flame atomic absorption spectrometric method |
YS
China National
Standards |
|
|
GB/T 14506.33-2019 |
Methods for chemical analYSis of silicate rocks—Part 33: Determination of arsenic, stibium, bismuth and mercury elements content—Hydride generation atomic fluorescence spectrometry |
YS
China National
Standards |
|
|
GB/T 7253-2019 |
Insulators for overhead lines with a nominal voltage above 1 000V—Ceramic or glass insulator units for a.c.sYStems—Characteristics of insulator units of the cap and pin type |
YS
China National
Standards |
|
|
GB 38755-2019 |
Code on security and stability for power sYStem |
YS
China National
Standards |
|
|
GB/T 38472-2019 |
Recycling materials for cast aluminium alloYS |
YS
China National
Standards |
|
|
GB/T 38438-2019 |
Operational evaluation index sYStem for electric power communication network |
YS
China National
Standards |
|
|
GB/T 38431-2019 |
Particulate—Dispersion stability analYSis─Static multiple light scattering |
YS
China National
Standards |
|
|
GB/T 38430-2019 |
Corrosion of metals and alloYS—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials |
YS
China National
Standards |
|
|
GB/T 38423-2019 |
Determination of total concentration of certain elements in toYS |
YS
China National
Standards |
|
|
GB/T 38420-2019 |
Determination of bisphenol A migration in polycarbonate and polYSulfone materials in toys—High performance liquid chromatography-tandem mass spectrometry |
YS
China National
Standards |
|
|
GB/T 38415-2019 |
Determination of tetrabromobisphenol A and hexabromocyclododecanes content in toYS—High performance liquid chromatography-tandem mass spectrometry |
YS
China National
Standards |
|
|
GB/T 38396-2019 |
Pitch products of coal carbonization—Determination of mesophase content—Microscopical analYSis by reflected light |
YS
China National
Standards |
|
|
GB/T 38389-2019 |
Methods for chemical analYSis of indium-tin oxide target |
YS
China National
Standards |
|
|
GB/T 38388-2019 |
Test method of solar PV sYStem for curtain wall and skylight of building |
YS
China National
Standards |
|
|
GB/T 38386-2019 |
Gas analYSis—Determination of oxynitride in gases—The method of Cavity Ring-Down Spectroscopy |
YS
China National
Standards |
|
|
GB/T 38374-2019 |
Operational index sYStem of urban rail transit |
YS
China National
Standards |
|
|
GB/T 38373-2019 |
Surface sYStems for sports facilities and motion performance—General vocabulary |
YS
China National
Standards |
|
|
GB/T 38359-2019 |
Data-analYSis methods of strength properties for structural wood and wood-based products |
YS
China National
Standards |
|
|
GB/T 38341-2019 |
Micro-electromechanical sYStem technology—The reliability test methods of MEMS in integrated environments |
YS
China National
Standards |
|
|
GB/T 20899.1-2019 |
Methods for chemical analYSis of gold ores—Part 1:Determination of gold content |
YS
China National
Standards |
|
|
GB/T 15076.2-2019 |
Methods for chemical analYSis of tantalum and niobium—Part 2:Determination of niobium content in tantalum—Inductively coupled plasma atomic emission spectrometry and stratography gravimetry |
YS
China National
Standards |
|
|
GB/T 15076.10-2019 |
Methods for chemical analYSis of tantalum and niobium—Part 10:Determination of iron,nickel,chromium,titanium, zirconium,aluminum and manganese contents in niobium—Direct current arc atomic emission spectrometry |
YS
China National
Standards |
|
|
GB/T 13747.7-2019 |
Methods for chemical analYSis of zirconium and zirconium alloys—Part 7：Determination of manganese content—Patassium periodate spectrometry and inductively coupled plasma atomic emission spectrometry |
YS
China National
Standards |
|
|
GB/T 13747.2-2019 |
Methods for chemical analYSis of zirconium and zirconium alloys—Part 2：Determination of iron content—1,10-phenanthroline spectrophotometry and inductively coupled plasma atomic emission spectrometry |
YS
China National
Standards |
|
|
GB/T 13747.12-2019 |
Methods for chemical analYSis of zirconium and zirconium alloys—Part 12：Determination of silicon content—Molybdenum blue spectrophotometry |
YS
China National
Standards |
|
|
GB/T 8647.11-2019 |
Methods for chemical analYSis of nickel－Part 11：Determination of magnesium，aluminum，manganese，cobalt，copper，zinc，cadmium，tin，antimony，lead，bismuth contents－Inductively coupled plasma mass spectrometry |
YS
China National
Standards |
|
|
GB/T 7739.3-2019 |
Methods for chemical analYSis of gold concerntrates—Part 3:Determination of arsenic content |
YS
China National
Standards |
|
|
GB/T 7739.2-2019 |
Methods for chemical analYSis of gold concentrates—Part 2:Determination of silver content—Flame atomic absorption spectrometric method |
YS
China National
Standards |
|
|
GB/T 7739.1-2019 |
Methods for chemical analYSis of gold concerntrates—Part 1：Determination of gold and silver contents |
YS
China National
Standards |
|
|
GB/T 3836.25-2019 |
Explosive atmospheres—Part 25：Requirements for process sealing between flammable process fluids and electrical sYStems |
YS
China National
Standards |
|
|
GB/T 38329.1-2019 |
Utility connections in port—Part 1: High voltage shore connection (HVSC) sYStem—General requirements |
YS
China National
Standards |
|
|
GB/T 38324-2019 |
Health informatics—Semantic network framework of traditional Chinese medicine language sYStem |
YS
China National
Standards |
|
|
GB/T 38322-2019 |
Information technology—Information device interconnection—Interface requirements between third-party smart home electric sYStem and general terminal access service platform |
YS
China National
Standards |
|
|
GB/T 38320-2019 |
Information technology—Information device interconnection—Interface requirements between smart home electric sYStem terminals and general terminal access service platform |
YS
China National
Standards |
|
|
GB/T 38318-2019 |
Cyber security assessment guide for electric power sYStem supervision and control |
YS
China National
Standards |
|
|
GB/T 38311-2019 |
Communication protocols and interfaces of public security and protection sYStem in urban rail transit |
YS
China National
Standards |
|
|
GB/T 38309-2019 |
Toxicity testing of fire effluents—Guidance for analYSis of gases and vapours in fire effluents using FTIR gas analysis |
YS
China National
Standards |
|
|
GB/T 38299-2019 |
Societal security—Business continuity management sYStems—Guidelines for supply chain continuity |
YS
China National
Standards |
|
|
GB/T 38293-2019 |
Ships and marine technology—Computer applications—General principles for the development and use of programmable electronic sYStems in marine applications |
YS
China National
Standards |
|
|
GB/T 38293-2019 |
Ships and marine technology—Computer applications—General principles for the development and use of programmable electronic sYStems in marine applications |
YS
China National
Standards |
|
|
GB/T 38286-2019 |
Polyethylene(PE)，polypropylene(PP) and polYStyrene(PS) resin―Determination of peroxide value |
YS
China National
Standards |
|
|
GB/T 38276-2019 |
Lubrication sYStem—Terminology and graphical symbols |
YS
China National
Standards |
|
|
GB/T 38275-2019 |
Lubrication sYStem—Inspection specification |
YS
China National
Standards |
|
|
GB/T 38274-2019 |
Lubrication sYStem—Efficiency assessment method |
YS
China National
Standards |
|
|
GB/T 38273.1-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation sYStem and basis for specification |
YS
China National
Standards |
|
|
GB/T 38271-2019 |
Plastics—Determination of residual styrene monomer in polYStyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography |
YS
China National
Standards |
|
|
GB/T 38269-2019 |
Corrosion of metals and alloYS—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity |
YS
China National
Standards |
|
|
GB/T 38267-2019 |
Numerical control sYStem of machine tool—Programming code |
YS
China National
Standards |
|
|
GB/T 38266-2019 |
Numerical control sYStem of machine tool—General for reliability |
YS
China National
Standards |
|
|
GB/T 38255-2019 |
Requirements analYSis for space science experiments |
YS
China National
Standards |
|
|
GB/T 38254-2019 |
Automatic control device for fire alarm receiving and dispatching sYStem |
YS
China National
Standards |
|
|
GB/T 38253-2019 |
Integrity management sYStem of houseware enterprise—Requirements |
YS
China National
Standards |
|
|
GB/T 27422-2019 |
Conformity assessment—Requirements for bodies providing audit and certification of business continuity management sYStems |
YS
China National
Standards |
|
|
GB/T 27021.7-2019 |
Conformity assessment—Requirements for bodies providing audit and certification of management sYStems—Part 7: Competence requirements for auditing and certification of road traffic safety management systems |
YS
China National
Standards |
|
|
GB/T 26218.4-2019 |
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions—Part 4: Insulators for d.c. sYStems |
YS
China National
Standards |
|
|
GB/T 26217-2019 |
DC voltage measuring device for HVDC transmission sYStem |
YS
China National
Standards |
|
|
GB/T 26216.1-2019 |
DC current measuring device for HVDC transmission sYStem—Part 1：Electronic DC current measuring device |
YS
China National
Standards |
|
|
GB/T 20899.3-2019 |
Methods for chemical analYSis of gold ores—Part 3:Determination of arsenic content |
YS
China National
Standards |
|
|
GB/T 20899.2-2019 |
Methods for chemical analYSis of gold ores一Part 2:Determination of silver content 一Flame atomic absorption spectrometric method |
YS
China National
Standards |
|
|
GB/T 14506.33-2019 |
Methods for chemical analYSis of silicate rocks—Part 33: Determination of arsenic, stibium, bismuth and mercury elements content—Hydride generation atomic fluorescence spectrometry |
YS
China National
Standards |
|
|
GB/T 7253-2019 |
Insulators for overhead lines with a nominal voltage above 1 000V—Ceramic or glass insulator units for a.c.sYStems—Characteristics of insulator units of the cap and pin type |
YS
China National
Standards |
|
|
GB 5135.22-2019 |
Automatic sprinkler sYStem—Part 22:Specific application sprinklers |
YS
China National
Standards |
|
|
GB 5135.1-2019 |
Automatic sprinkler sYStem—Part 1: Sprinklers |
YS
China National
Standards |
|
|
GB 24545-2019 |
Requirements and test methods of speed limitation sYStem for motor vehicles |
YS
China National
Standards |
|
|
GB 13851-2019 |
Traffic safety signs on inland waterwaYS |
YS
China National
Standards |
|
|
GB 12663-2019 |
Intrusion and hold-up sYStems—Control and indicating equipment |
YS
China National
Standards |
|
|
CJJ/T 291-2019 |
Standard for engineering investigation of ground-source heat pump sYStem |
YS
China National
Standards |
|
|
JGJ/T 479-2019 |
(Application technical standard for low temperature radiation self-limiting temperature electric heating sYStem) |
YS
China GB-National
Standards |
|
|
JGJ/T 454-2019 |
Standard for quality testing of intelligent building sYStems |
YS
China National
Standards |
|
|
JGJ/T 253-2019 |
Technical standard for thermal insulating sYStems of inorganic lightweight aggregate mortar |
YS
China National
Standards |
|
|
GB 51378-2019 |
Standard for acceptance of high voltage DC power supply sYStem engineering for telecommunication |
YS
China GB-National
Standards |
|
|
GB/T 51368-2019 |
Technical standard for photovoltaic sYStem on building |
YS
China National
Standards |
|
|
GB 50365-2019 |
Standard for operation and management of central air conditioning sYStem
|
YS
China National
Standards |
|
|
GB/T 50115-2019 |
(Industrial TV SYStem Engineering Design Standard) |
YS
China National
Standards |
|
|
GB/T 50081-2019 |
Standard for test methods of concrete phYSical and mechanical properties
|
YS
China National
Standards |
|
|
GB 24545-2019 |
Requirements and test methods of speed limitation sYStem for motor vehicles |
YS
China National
Standards |
|
|
GB 13851-2019 |
Traffic safety signs on inland waterwaYS |
YS
China National
Standards |
|
|
GB 12663-2019 |
Intrusion and hold-up sYStems—Control and indicating equipment |
YS
China National
Standards |
|
|
GB/T 38025-2019 |
Interface specification for remote sensing satellite ground sYStem |
YS
China National
Standards |
|
|
GB/T 38015-2019 |
Textiles—Quantitative chemical analYSis—Mixtures of elastane and certain other fibers |
YS
China National
Standards |
|
|
GB/T 38004-2019 |
Spectacle frames—Measuring sYStem and terminology |
YS
China National
Standards |
|
|
GB/T 38002.1-2019 |
Automation sYStem and integration—Serial real time communication system for manufacturing integration—Part 1:General overview and architecture |
YS
China National
Standards |
|
|
GB/T 38000.1-2019 |
Identification sYStems enabling unambiguous information interchange—Requirements—Part 1: Principles and methods |
YS
China National
Standards |
|
|
GB/T 37995-2019 |
Rubber ring of main drive chain for wind turbine generator sYStem |
YS
China National
Standards |
|
|
GB/T 37992-2019 |
Safety and control devices for gas burners and gas-burning-appliances—Particular requirements—Vavle-proving sYStems for automatic shut-off valves |
YS
China National
Standards |
|
|
GB/T 37985-2019 |
Technical requirements for key management sYStem for the elictronic identification of motor vehicle |
YS
China National
Standards |
|
|
GB/T 37983-2019 |
Testing methods of X-ray diffraction for determining the orientation of crYStal materials by rotation |
YS
China National
Standards |
|
|
GB/T 37981-2019 |
AnalYSis techniques for dependability—Reliability block diagram and boolean methods |
YS
China National
Standards |
|
|
GB/T 37980-2019 |
Information security technology—Guide for security inspection of industrial control sYStems |
YS
China National
Standards |
|
|
GB/T 37974-2019 |
General requirements for automatic test sYStem acceptance |
YS
China National
Standards |
|
|
GB/T 37971-2019 |
Information security technology—Framework of smart city security sYStem |
YS
China National
Standards |
|
|
GB/T 37969-2019 |
Standard guidelines for near infrared qualitative analYSis |
YS
China National
Standards |
|
|
GB/T 37962-2019 |
Information security technology—Common criteria for industrial control sYStem products security |
YS
China National
Standards |
|
|
GB/T 37958-2019 |
Requirements of optical radiation safety for active lighting units of video surveillance sYStems |
YS
China National
Standards |
|
|
GB/T 37954-2019 |
Information security technology—Technique requirements and testing and evaluation approaches for industrial control sYStem vulnerability detection products |
YS
China National
Standards |
|
|
GB/T 37947.1-2019 |
Information technology—Energy consumption monitoring sYStem of energy user—Part 1:Data transmission interface for monitoring devices |
YS
China National
Standards |
|
|
GB/T 37941-2019 |
Information security technology—Security technical requirements of industrial control sYStem network audit products |
YS
China National
Standards |
|
|
GB/T 37938-2019 |
Information technology—Cloud resources monitoring index sYStem |
YS
China National
Standards |
|
|
GB/T 37934-2019 |
Information security technology—Security technical requirements of industrial control sYStem security isolation and information ferry system |
YS
China National
Standards |
|
|
GB/T 37933-2019 |
Information security technology—Technical requirements of industrial control sYStem dedicated firewall |
YS
China National
Standards |
|
|
GB/T 37931-2019 |
Information security technology—Security technology requirements and testing and evaluation approaches for Web application security detection sYStem |
YS
China National
Standards |
|
|
GB/T 37930-2019 |
Non-destructive testing instruments—Technical specifications of X-ray real-time imaging sYStem for automobile wheel |
YS
China National
Standards |
|
|
GB/T 37922-2019 |
Palletized unit load-based logistics sYStem—General technical specification |
YS
China National
Standards |
|
|
GB/T 37921-2019 |
Wind turbines generator sYStem under high altitude |
YS
China National
Standards |
|
|
GB/T 37911.2-2019 |
Application interface of BDS timing for power sYStem—Part 2:Testing specification |
YS
China National
Standards |
|
|
GB/T 37911.1-2019 |
Application interface of BDS timing for power sYStem—Part 1: Technical specification |
YS
China National
Standards |
|
|
GB/T 37910.2-2019 |
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloYS |
YS
China National
Standards |
|
|
GB/T 37910.1-2019 |
Non-destructive testing of welds—Acceptance levels for radiographic testing—Part 1:Steel,nickel,titanium and their alloYS |
YS
China National
Standards |
|
|
GB/T 37896-2019 |
Lightweight crYStalline silicon photovoltaic (PV) laminated glass |
YS
China National
Standards |
|
|
GB/T 37891.6-2019 |
Cutter arbors with parallel key and tenon drive—Part 6: Dimensions and designation of tool holders with modular taper interface with ball track sYStem |
YS
China National
Standards |
|
|
GB/T 37865-2019 |
AnalYSis method of 14C in biological samples—Oxgen bomb combustion method |
YS
China National
Standards |
|
|
GB/T 37863.1-2019 |
Railway applications—Traction electric drive sYStem—Part 1: Urban rail vehicles |
YS
China National
Standards |
|
|
GB/T 37847-2019 |
General rules for isotope composition analYSis by mass spectrometry |
YS
China National
Standards |
|
|
GB/T 37845-2019 |
Technical requirements for home security intelligent management sYStems |
YS
China National
Standards |
|
|
GB/T 37818-2019 |
Index sYStem and assessment methods of green shipbuilding for shipbuilding enterprise |
YS
China National
Standards |
|
|
GB/T 37815-2019 |
General specification for intelligent dust fall sYStem in fully-mechanized mining and top coal caving mining face |
YS
China National
Standards |
|
|
GB/T 37814-2019 |
Technical specification for remote power supply sYStem in fully-mechanized mining and top coal caving mining face |
YS
China National
Standards |
|
|
GB/T 37808-2019 |
Design specification for conventional power supply sYStem in fully-mechanized mining and top coal caving mining face |
YS
China National
Standards |
|
|
GB/T 37797-2019 |
Precision alloYS—Designation |
YS
China National
Standards |
|
|
GB/T 37793-2019 |
Quantitative analYSis of dendritic segregation in steel billets |
YS
China National
Standards |
|
|
GB/T 37790-2019 |
Implementation guidance for energy management sYStems in shipbuilding industry |
YS
China National
Standards |
|
|
GB/T 37779-2019 |
Implementation guidance for energy management sYStem in data centers |
YS
China National
Standards |
|
|
GB/T 37743-2019 |
Information technology—Identification service interfaces of operating sYStem in intelligent device |
YS
China National
Standards |
|
|
GB/T 37737-2019 |
Information technology—Cloud computing—General technique requirements of distributed block storage sYStem |
YS
China National
Standards |
|
|
GB/T 37732-2019 |
Information technology—Cloud computing—Functions of service interface for cloud storage sYStem |
YS
China National
Standards |
|
|
GB/T 37731-2019 |
est method for Linux desktop operating sYStem |
YS
China National
Standards |
|
|
GB/T 37730-2019 |
Test method for Linux server operating sYStem |
YS
China National
Standards |
|
|
GB/T 37727-2019 |
Information technology—General technical requirements of sensor networks sYStem for demand side power substation |
YS
China National
Standards |
|
|
GB/T 37725-2019 |
Information technology—Business management sYStem model |
YS
China National
Standards |
|
|
GB/T 37723-2019 |
Information technology—Information device interconnection—General technical requirement for smart home electric sYStem terminal access service platform |
YS
China National
Standards |
|
|
GB/T 37722-2019 |
Information technology—Technical requirements for big data storage and processing sYStems |
YS
China National
Standards |
|
|
GB/T 37721-2019 |
Information technology—Functional requirements for big data analytic sYStems |
YS
China National
Standards |
|
|
GB/T 37699-2019 |
Construction guide for standard sYStem of Chinese news information |
YS
China National
Standards |
|
|
GB/T 37694-2019 |
Technical requirements of internet of things sYStem for tourist service management |
YS
China National
Standards |
|
|
GB/T 37693-2019 |
Information technology—General architecture for industrial equipment inspection management sYStem based on sensing device |
YS
China National
Standards |
|
|
GB/T 37611-2019 |
General specification for advance support sYStem in fully-mechanized mining and top coal caving mining face |
YS
China National
Standards |
|
|
GB/T 37482-2019 |
Implementation guidance for energy management sYStems in aluminum electrolysis industry |
YS
China National
Standards |
|
|
GB/T 37400.16-2019 |
Heavy mechanical general technical specification—Part 16：Hydraulic sYStem |
YS
China National
Standards |
|
|
GB/T 36628.4-2019 |
Information technology－Telecommunications and information exchange between sYStems－Visible light communication－Part 4：Transmission protocol for indoor positioning |
YS
China National
Standards |
|
|
GB/T 36628.3-2019 |
Information technology－Telecommunications and information exchange between sYStems－Visible light communication－Part 3：Specification of media access control and physical layer for high-rate visible light communication |
YS
China National
Standards |
|
|
GB/T 36628.2-2019 |
Information technology－Telecommunications and information exchange between sYStems－Visible light communication－Part 2：Specification of media access control and physical layer for low-rate and narrowband visible light communication |
YS
China National
Standards |
|
|
GB/T 34044.1-2019 |
Automation sYStems and integration—Key performance indicators (KPIs) for manufacturing operations management—Part 1: Overview, concepts and terminology |
YS
China National
Standards |
|
|
GB/T 33475.1-2019 |
Information technology—High efficiency multimedia coding—Part 1: SYStem |
YS
China National
Standards |
|
|
GB/T 32671.2-2019 |
Colloidal sYStems—Methods for zeta-potential determination—Part 2:Optical methods |
YS
China National
Standards |
|
|
GB/T 30269.304-2019 |
Information technology—Sensor networks—Part 304:Communication and information exchange:Technical requirements of soundwave communication sYStem |
YS
China National
Standards |
|
|
GB/T 28827.6-2019 |
Information technology service—Operations and maintenance—Part 6: Application sYStem service requirements |
YS
China National
Standards |
|
|
GB/T 25000.23-2019 |
SYStems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Part 23: Measurement of system and software product quality |
YS
China National
Standards |
|
|
GB/T 25000.22-2019 |
SYStems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Part 22: Measurement of quality in use |
YS
China National
Standards |
|
|
GB/T 25000.21-2019 |
SYStems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Part 21: Quality measure elements |
YS
China National
Standards |
|
|
GB/T 20979-2019 |
Information security technology—Technical requirements for iris recognition sYStem |
YS
China National
Standards |
|
|
GB/T 20720.1-2019 |
Enterprise-control sYStem integration—Part 1: Models and terminology |
YS
China National
Standards |
|
|
GB/T 20273-2019 |
Information security technology—Security technical requirements for database management sYStem |
YS
China National
Standards |
|
|
GB/T 20272-2019 |
Information security technology—Security technical requirements for operating sYStem |
YS
China National
Standards |
|
|
GB/T 20009-2019 |
Information security technology—Security evaluation criteria for database management sYStem |
YS
China National
Standards |
|
|
GB/T 20979-2019 |
Information security technology—Technical requirements for iris recognition sYStem |
YS
China National
Standards |
|
|
GB/T 20273-2019 |
Information security technology—Security technical requirements for database management sYStem |
YS
China National
Standards |
|
|
GB/T 20272-2019 |
Information security technology—Security technical requirements for operating sYStem |
YS
China National
Standards |
|
|
GB/T 20009-2019 |
Information security technology—Security evaluation criteria for database management sYStem |
YS
China National
Standards |
|
|
GB/T 19903.14-2019 |
Automation sYStems and integration—Physical device control—Data model for computerized numerical controllers—Part 14: Process data for sink electrical discharge machining (sink-EDM) |
YS
China National
Standards |
|
|
GB/T 19903.13-2019 |
Automation sYStems and integration—Physical device control—Data model for computerized numerical controllers—Part 13: Process data for wire electrical discharge machining (wire-EDM) |
YS
China National
Standards |
|
|
GB/T 19630-2019 |
Organic products—Requirements for production,processing,labeling and management sYStem |
YS
China National
Standards |
|
|
GB/T 19472.1-2019 |
Polyethylene structure wall pipeline sYStem for underground usage—Part 1: Polyethylene double wall corrugated pipes |
YS
China National
Standards |
|
|
GB/T 18910.62-2019 |
Liquid crYStal display devices—Part 6-2: Measuring methods for liquid crystal display modules—Reflective type |
YS
China National
Standards |
|
|
GB/T 18882.3-2019 |
Chemical analYSis methods for mixed rare earth oxide of ion-absorption rare earth ore—Part 3: Determination of silicon dioxide content |
YS
China National
Standards |
|
|
GB/T 18477.3-2019 |
Unplasticized polyvinyl chloride (PVC-U) structure wall pipeline sYStem for underground soil waste and drainage—Part 3: Axial hollow-wall construction pipes |
YS
China National
Standards |
|
|
GB/T 15879.4-2019 |
Mechanical standardization of semiconductor devices—Part 4: Coding sYStem and classification into forms of package outlines for semiconductor device packages |
YS
China National
Standards |
|
|
GB/T 13558-2019 |
DYSprosium oxide |
YS
China National
Standards |
|
|
GB/T 10067.416-2019 |
Basic specifications for electroheating and electromagnetic processing installations—Part 416: PolYSilicon ingot furnace |
YS
China National
Standards |
|
|
GB/T 8152.14-2019 |
Methods for chemical analYSis of lead concentrates—Part 14: Determination of silicon dioxide content—Molybdenum blue spectrophotometry |
YS
China National
Standards |
|
|
GB/T 7739.14-2019 |
Methods for chemical analYSis of gold concentrates—Part 14: Determination of thallium content—Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry |
YS
China National
Standards |
|
|
GB 38030.4-2019 |
Dimensions series of standard transport ship types passing the locks of inland rivers—Part 4：The “three lanes” of the Pearl River sYStem |
YS
China National
Standards |
|
|
GB 38030.2-2019 |
Dimensions series of standard transport ship types passing the locks of inland rivers—Part 2：Grand Canal and Huai River sYStem |
YS
China National
Standards |
|
|
GB 38030.1-2019 |
Dimensions series of standard transport ship types passing the locks of inland rivers—Part 1：Changjiang River sYStem |
YS
China National
Standards |
|
|
CNCA-13C-073:2010 |
ToYS Product Implementation Rules for Compulsory Certification - doll toy products
|
YS
China CNCA - Implementation Rules for Compulsory Certification
Standards |
|
|
CNCA-13C-072:2010 |
ToYS Product Implementation Rules for Compulsory Certification - catapult toy products
|
YS
China CNCA - Implementation Rules for Compulsory Certification
Standards |
|
|
CNCA-13C-071:2010 |
ToYS Product Implementation Rules for Compulsory Certification - metal toy products
|
YS
China CNCA - Implementation Rules for Compulsory Certification
Standards |
|
|
CNCA-13C-070:2010 |
ToYS Product Implementation Rules for Compulsory Certification - plastic toy products
|
YS
China CNCA - Implementation Rules for Compulsory Certification
Standards |
|
|
CNCA-13C-069:2010 |
ToYS Product Implementation Rules for Compulsory Certification - electric toy products
|
YS
China CNCA - Implementation Rules for Compulsory Certification
Standards |
|
|
CNCA-13C-068:2010 |
ToYS Product Implementation Rules for Compulsory Certification - stroller products
|
YS
China CNCA - Implementation Rules for Compulsory Certification
Standards |
|
|
CNCA-C22-03:2014 |
China Compulsory Certification Implementation Rules - Vehicle occupant restraint sYStem for children
|
YS
China CNCA - Implementation Rules for Compulsory Certification
Standards |
|
|
CNCA-C19-02:2014 |
China Compulsory Certification Implementation Rules - PhYSical security protection products
|
YS
China CNCA - Implementation Rules for Compulsory Certification
Standards |
|
|
GB/T 37761-2019 |
Technical requirements of PLC control device of power transformer cooling sYStem |
YS
China National
Standards |
|
|
GB/T 37715-2019 |
Specification for base platform and application sYStem software testing of IoTPS |
YS
China National
Standards |
|
|
GB/T 37708-2019 |
Quality management—Guidelines for successful data envelopment analYSis of product |
YS
China National
Standards |
|
|
GB/T 37666-2019 |
Technical standards of neutron activation analYSis（NAA） for ancient ceramics |
YS
China National
Standards |
|
|
GB/T 37665-2019 |
：Non-destructive testing for chemical compositions of ancient ceramics—PIXE analYSis technique standards |
YS
China National
Standards |
|
|
GB/T 37663.3-2019 |
Outdoor empirical test requirements for distributed photovoltaic in warm damp climate—Part 3: Grid-connection photovoltaic sYStem |
YS
China National
Standards |
|
|
GB/T 37662.2-2019 |
：Electrical equipment and sYStem of industrial machines—Terminology—Part 2：Plastics machinery |
YS
China National
Standards |
|
|
GB/T 37661-2019 |
General specification for marine public address sYStem |
YS
China National
Standards |
|
|
GB/T 37656-2019 |
Maritime navigation and radiocommunication equipment and sYStems—VHF radiotelephone equipment incorporating Class“D”Digital Selective Calling（DSC）—Methods of testing and required test results |
YS
China National
Standards |
|
|
GB/T 37655-2019 |
Acceptance specification of building integrated photovoltaic power sYStems |
YS
China National
Standards |
|
|
GB/T 37648-2019 |
Assessment indicator sYStem of cleaner production—Wood furniture manufacturing |
YS
China National
Standards |
|
|
GB/T 37641-2019 |
Determination of 2,3,5,4'-tetrahydroxYStilbene-O-β-D-glucoside in cosmetics―High performance liquid chromatography |
YS
China National
Standards |
|
|
GB/T 37630-2019 |
Textiles—Quantitative chemical analYSis—Mixtures of acetate or triacetate with certain other fibres（method using hydrochloric acid） |
YS
China National
Standards |
|
|
GB/T 37629-2019 |
Textiles—Quantitative chemical analYSis—Mixtures of acrylic with certain other fibres（method using formic acid and zinc chloride） |
YS
China National
Standards |
|
|
GB/Z 37627.1-2019 |
Aluminum alloy extruded tubes for non-nuclear grade nuclear power cooling sYStems |
YS
China National
Standards |
|
|
GB/T 37623-2019 |
Corrosion of metals and alloYS—Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors |
YS
China National
Standards |
|
|
GB/T 37619-2019 |
Corrosion of metals and alloYS—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes |
YS
China National
Standards |
|
|
GB/T 37616-2019 |
Aluminium alloYS extruded profiles-axial force controlled fatigue testing method |
YS
China National
Standards |
|
|
GB/T 37603-2019 |
Medium temperature brazing filler metals of aluminum alloYS |
YS
China National
Standards |
|
|
GB/T 37579-2019 |
Aluminum alloy extruded tubes for non-nuclear grade nuclear power cooling sYStems |
YS
China National
Standards |
|
|
GB/T 37563-2019 |
Safety requirements for pressurized water electrolYSis system for hydrogen production |
YS
China National
Standards |
|
|
GB/T 37562-2019 |
Technical conditions of pressurized water electrolYSis system for hydrogen production |
YS
China National
Standards |
|
|
GB/T 37561-2019 |
Standard practice for de-agglomeration of refractory metal powders and their compounds prior to particle size analYSis |
YS
China National
Standards |
|
|
GB/T 37555-2019 |
Marine liquid level measuring sYStem |
YS
China National
Standards |
|
|
GB/T 37550-2019 |
Data asset evaluation index sYStem for electronic commerce |
YS
China National
Standards |
|
|
GB/T 37546-2019 |
Technical specification for unattended substation monitoring and control sYStem |
YS
China National
Standards |
|
|
GB/T 37537-2019 |
Safety monitoring sYStem for builders hoist |
YS
China National
Standards |
|
|
GB/T 37534-2019 |
Evaluation index sYStem for material-saving of shipbuilding enterprise |
YS
China National
Standards |
|
|
GB/T 37532-2019 |
General technical specification for 120km~160 km/h commuter express of urban rail transit sYStem |
YS
China National
Standards |
|
|
GB/T 37516-2019 |
Specification of care services for intellectual, mental and severe phYSical disabilities at working age |
YS
China National
Standards |
|
|
GB/T 37414.1-2019 |
Industrial Robot Electrical Equipment and SYStems Part1: Requirements for Controller |
YS
China National
Standards |
|
|
GB/T 35031.7-2019 |
Customer energy management sYStem—Part 7：Function classification and system gradation |
YS
China National
Standards |
|
|
GB/T 35031.6-2019 |
Customer energy management sYStem—Part 6: Management indicator system |
YS
China National
Standards |
|
|
GB/T 31843.2-2019 |
Maritime navigation and radiocommunication equipment and sYStems—Digital interfaces—Part 2：Single talker and multiple listeners—High-speed transmission |
YS
China National
Standards |
|
|
GB/T 29723.5-2019 |
Grade and limit of major process energy consumption for coal mine—Part 5: Main elevating sYStem |
YS
China National
Standards |
|
|
GB/T 29055-2019 |
MulticrYStalline silicon wafers for photovoltaic solar cell |
YS
China National
Standards |
|
|
GB/T 29054-2019 |
Casting multicrYStalline silicon brick for photovoltaic solar cell |
YS
China National
Standards |
|
|
GB/T 24959-2019 |
Refrigerated light hydrocarbon fluids—General requirements for temperature measurement sYStem in cargo tanks of LNG carrier |
YS
China National
Standards |
|
|
GB/T 24113.2-2019 |
Electrical equipment of machines—Computer control sYStems for plastics machinery—Part 2：Test and evaluation method |
YS
China National
Standards |
|
|
GB/T 23524-2019 |
Method for chemical analYSis of petrochemical spent platinum catalyst—Determination of platinum—Inductively coupled plasma atomic emission spectrometry |
YS
China National
Standards |
|
|
GB/T 22720.2-2019 |
Rotating electrical machines—Qualification tests for the partial discharge resistant electrical insulation sYStems (Type II) used in rotating electrical machines fed from voltage converters |
YS
China National
Standards |
|
|
GB/T 22649-2019 |
Aluminium and aluminium alloYS foil for container |
YS
China National
Standards |
|
|
GB/T 22135-2019 |
Commissioning of electrical,instrumentation and control sYStems in the process industry—Specific phases and milestones |
YS
China National
Standards |
|
|
GB/T 21114-2019 |
Refractories—Chemical analYSis by X-ray fluorescence(XRF)—Fused cast-bead method |
YS
China National
Standards |
|
|
GB/T 20975.31-2019 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 31：Determination of phosphorus content—Molybdenum blue spectrophotometry |
YS
China National
Standards |
|
|
GB/T 20975.30-2019 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 30：Determination of hydrogen content—Heating extraction-thermal conductivity method |
YS
China National
Standards |
|
|
GB/T 20975.29-2019 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 29:Determination of molybdenum content—Thiocyanate spectrophotometry |
YS
China National
Standards |
|
|
GB/T 20975.28-2019 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 28:Determination of cobalt content—Flame atomic absorption spectrometry |
YS
China National
Standards |
|
|
GB/T 17005-2019 |
General requirements for impressed current cathodic protection sYStem of coastal structures |
YS
China National
Standards |
|
|
GB/T 15076.3-2019 |
Methods for chemical analYSis of tantalum and niobium—Part 3：Determination of copper content—Flame atomic absorption spectrometry |
YS
China National
Standards |
|
|
GB/T 13747.6-2019 |
Methods for chemical analYSis of zirconium and zirconium alloys—Part 6：Determination of copper content—2,9-Dimethyl-1,10-phenanthroline spectrophotometry |
YS
China National
Standards |
|
|
GB/T 13747.5-2019 |
Methods for chemical analYSis of zirconium and zirconium alloys—Part 5：Determination of aluminium content—Chronic azurol-S-tetradrcylpyridine chloride spectrophotometry |
YS
China National
Standards |
|
|
GB/T 11805-2019 |
General specifications of automatic control components (devices) and their related sYStem for hydroturbine-generating sets |
YS
China National
Standards |
|
|
GB/T 9652.2-2019 |
Testing specification of hydraulic turbine governing sYStems |
YS
China National
Standards |
|
|
GB/T 9652.1-2019 |
Specification of hydraulic turbine governing sYStems |
YS
China National
Standards |
|
|
GB/T 7739.13-2019 |
Methods for chemical analYSis of gold concentrates—Part 13: Determination of lead， zinc， bismuth， cadmium， chromium， arsenic and mercury contents—Inductively coupled plasma atomic emission spectrometry |
YS
China National
Standards |
|
|
GB/T 6040-2019 |
General rules for infrared analYSis |
YS
China National
Standards |
|
|
GB/T 5238-2019 |
MonocrYStalline germanium and monocrystalline germanium slices |
YS
China National
Standards |
|
|
GB/T 4698.21-2019 |
Methods for chemical analYSis of titanium sponge, titanium and titanium alloys—Part 21: Determination of manganese, chromium, nickel, aluminum, molybdenum, tin, vanadium, yttrium, copper and zirconium content—Atomic emission spectrometry |
YS
China National
Standards |
|
|
GB/T 4698.17-2019 |
Methods for chemical analYSis of titanium sponge, titanium and titanium alloys—Part 17:Determination of magnesium content—Flame atomic absorption spectrometry |
YS
China National
Standards |
|
|
GB/T 3191-2019 |
Extrusion rods and bars of aluminium and aluminium alloYS |
YS
China National
Standards |
|
|
GB/T 37515-2019 |
Specification for construction of recyclable resources recycling sYStem |
YS
China National
Standards |
|
|
GB/T 37477-2019 |
Simulation test methods of surface support,launch and recovery for rescue sYStem |
YS
China National
Standards |
|
|
GB/T 37474-2019 |
Methods and requirements of airbag sYStem abuse test for automobile |
YS
China National
Standards |
|
|
GB/T 37472-2019 |
General requirements for heave compensation sYStem of submersible mothership |
YS
China National
Standards |
|
|
GB/T 37471-2019 |
Intelligent transportation sYStems—Lane change decision aid systems—Performance requirements and test procedures |
YS
China National
Standards |
|
|
GB/T 37459-2019 |
Jack-up jacking sYStem installation requirement
|
YS
China National
Standards |
|
|
GB/T 37456-2019 |
Electric driven rack pinion jacking sYStem for offshore platform |
YS
China National
Standards |
|
|
GB/T 37455-2019 |
Hydraulic ring-beam jacking sYStem for offshore platform |
YS
China National
Standards |
|
|
GB/T 37436-2019 |
Intelligent transportation sYStems—Extended-range backing aid systems—Performance requirements and test procedures |
YS
China National
Standards |
|
|
GB/T 37419-2019 |
Small craft—Electrical/electronic control sYStems for steering, shift and throttle |
YS
China National
Standards |
|
|
GB/T 37418-2019 |
Lutetium oxyorthosilicate, lutetium-yttrium oxyorthosilicate scintillation single crYStals |
YS
China National
Standards |
|
|
GB/T 37417-2019 |
Maritime navigation and radiocommunication equipment and sYStems—Track control systems—Operational and performance requirements，methods of testing and required test results |
YS
China National
Standards |
|
|
GB/T 37407-2019 |
Application guide—Engineering of sYStem dependability |
YS
China National
Standards |
|
|
GB/T 37403-2019 |
Tetramethylammonium hydroxide developer for thin film transistor-liquid crYStal display(TFT-LCD) |
YS
China National
Standards |
|
|
GB/T 37399-2019 |
Test methods for high voltage shore connection sYStem |
YS
China National
Standards |
|
|
GB/T 37398-2019 |
Barium fluoride scintillation crYStal |
YS
China National
Standards |
|
|
GB/T 37380-2019 |
Application data exchange protocol to support ITS service provision for personal intelligent transport sYStem station |
YS
China National
Standards |
|
|
GB/T 37379-2019 |
Technical specification for 2.45 GHz radio frequency identification sYStem of inland navigation vessels |
YS
China National
Standards |
|
|
GB/T 37155.2-2019 |
Technical guidance of protection and control sYStem on regional power grid—Part 2:Information interface and communication |
YS
China National
Standards |
|
|
GB/T 31024.4-2019 |
Cooperative intelligent transportation sYStems—Dedicated short range communications—Part 4: Equipment application specification |
YS
China National
Standards |
|
|
GB/T 31024.3-2019 |
Cooperative intelligent transportation sYStems—Dedicated short range communications—Part 3:Network layer and application layer specification |
YS
China National
Standards |
|
|
GB/T 20851.5-2019 |
Electronic toll collection—Dedicated short range communication—Part 5:Test methods of the main parameters in phYSical layer |
YS
China National
Standards |
|
|
GB/T 20851.1-2019 |
Electronic toll collection—Dedicated short range communication—Part 1:PhYSical layer |
YS
China National
Standards |
|
|
GB/T 20730.2-2019 |
Instruments with analogue inputs and two-or multi-state outputs for use in industrial-process control sYStems—Part 2:Guidance for inspection and routine testing |
YS
China National
Standards |
|
|
GB/T 19314.3-2019 |
Small craft—Hull construction and scantlings—Part 3:Materials:Steel,aluminium alloYS,wood,other materials |
YS
China National
Standards |
|
|
GB/T 17424-2019 |
Technical requirements of differential global navigation satellite sYStem |
YS
China National
Standards |
|
|
GB/T 16977-2019 |
Robots and robotic devices—Coordinate sYStems and motion nomenclatures |
YS
China National
Standards |
|
|
GB/T 37382-2019 |
Optical functional films—Films for backlight unit of liquid crYStal display—High temperature and high humidity aging measurement |
YS
China National
Standards |
|
|
GB/T 37366-2019 |
Tower crane safety monitor sYStem and data transmission specifications |
YS
China National
Standards |
|
|
GB/T 37360-2019 |
Test method of activity for rhodium carbon catalYSts |
YS
China National
Standards |
|
|
GB/T 37359-2019 |
Test method of activity for palladium carbon catalYSts |
YS
China National
Standards |
|
|
GB/T 37355-2019 |
Test method of mercury removal rate for activated carbon mercury removal catalYSt |
YS
China National
Standards |
|
|
GB/T 37354-2019 |
Analytical method of chemical composition for activated carbon mercury removal catalYSt |
YS
China National
Standards |
|
|
GB/T 37352-2019 |
Marine selective catalytic reduction（SCR） cellular-type denitrification catalYSts |
YS
China National
Standards |
|
|
GB/T 37343-2019 |
Maritime navigation radiocommunication equipment and sYStems—Bridge navigational watch alarm system（BNWAS） |
YS
China National
Standards |
|
|
GB/T 37323-2019 |
Marine pneumatic valve remote control sYStem |
YS
China National
Standards |
|
|
GB/T 37321-2019 |
Chemical analYSis methods of different sulfur forms in gypsum and gypsum products |
YS
China National
Standards |
|
|
GB/T 37317-2019 |
Railway applications—Guide for lightning protection of DC overhead contact sYStem |
YS
China National
Standards |
|
|
GB/T 37295-2019 |
Urban public facilities—Requirements for security and protection sYStem of electric vehicle charging/battery swap infrastructure |
YS
China National
Standards |
|
|
GB/T 37291-2019 |
Technical requirements for LTE based Broadband Trunking Communication (B-TrunC) sYStem (Phase 1) |
YS
China National
Standards |
|
|
GB/T 37290-2019 |
LTE based Broadband Trunking Communication (B-TrunC) sYStem—Technical requirements for interface (Phase 1)—Uu-T interface |
YS
China National
Standards |
|
|
GB/T 37289-2019 |
LTE based Broadband Trunking Communication (B-TrunC) sYStem—Technical requirements for interface (Phase 1)—Interface between UE and trunking core network |
YS
China National
Standards |
|
|
GB/T 37287-2019 |
LTE based Broadband Trunking Communication (B-TrunC) sYStem—Technical requirements for interface (Phase 1)—Interface between trunking core network and dispach console |
YS
China National
Standards |
|
|
GB/T 37286-2019 |
Intellectual property analYSis and appraisal service—Service specification |
YS
China National
Standards |
|
|
GB/T 37050-2019 |
Fastening screw thread gaging sYStems for acceptability |
YS
China National
Standards |
|
|
GB/T 21412.11-2019 |
Petroleum and natural gas industries—Design and operation of subsea production sYStems—Part 11:Recommended practice for flexible pipe |
YS
China National
Standards |
|
|
GB/T 21412.10-2019 |
Petroleum and natural gas industries—Design and operation of subsea production sYStems—Part 10: Specification for bonded flexible pipe |
YS
China National
Standards |
|
|
GB/T 16596-2019 |
Specification for establishing a wafer coordinate sYStem |
YS
China National
Standards |
|
|
GB/T 12668.7301-2019 |
Adjustable speed electrical power drive sYStems—Part 7-301: Generic interface and use of profiles for power drive systems—Mapping of profile type 1 to network technologies |
YS
China National
Standards |
|
|
GB/T 12668.7201-2019 |
Adjustable speed electrical power drive sYStems—Part 7-201: Generic interface and use of profiles for power drive systems—Profile type 1 specification |
YS
China National
Standards |
|
|
GB/T 11024.4-2019 |
Shunt capacitors for a.c. power sYStems having a rated voltage above 1 000 V—Part 4:Internal fuses |
YS
China National
Standards |
|
|
GB/T 11024.3-2019 |
Shunt capacitors for a.c. power sYStems having a rated voltage above 1 000 V—Part 3:Protection of shunt capacitors and shunt capacitor banks |
YS
China National
Standards |
|
|
GB/T 11024.2-2019 |
Shunt capacitors for a.c. power sYStems having a rated voltage above 1 000 V - Part 2: Ageing testing |
YS
China National
Standards |
|
|
GB/T 11024.1-2019 |
Shunt capacitors for a.c. power sYStems having a rated voltage above 1 000 V—Part 1:General |
YS
China National
Standards |
|
|
GB/T 25000.45-2018 |
SYStems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Part 45: Evaluation module for recoverability |
YS
China National
Standards |
|
|
GB/T 25000.41-2018 |
SYStems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Part 41: Evaluation guide for developers, acquirers and independent evaluators |
YS
China National
Standards |
|
|
GB/T 25000.40-2018 |
SYStems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Part 40：Evaluation process |
YS
China National
Standards |
|
|
GB/T 25000.2-2018 |
SYStems and software engineering—Systems and software Quality Requirements and Evaluation(SQuaRE)—Part 2：Planning and management |
YS
China National
Standards |
|
|
GB/T 34691.1-2018 |
Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 1:Designation sYStem and basis for specifications |
YS
China National
Standards |
|
|
GB/T 33925.2-2018 |
Liquid pumps and installation—General terms, definitions, quantities, letter symbols and units—Part 2: Pumping sYStem |
YS
China National
Standards |
|
|
GB/T 6809.11-2018 |
Reciprocating internal combustion engines—Vocabulary of components and sYStems—Part 11: Fuel systems |
YS
China National
Standards |
|
|
GB/T 27021.5-2018 |
Conformity assessment—Requirements for bodies providing audit and certification of management sYStems—Part 5: Competence requirements for auditing and certification of asset management systems |
YS
China National
Standards |
|
|
GB/T 27021.4-2018 |
Conformity assessment—Requirements for bodies providing audit and certification of management sYStems—Part 4: Competence requirements for auditing and certification of event sustainability management systems |
YS
China National
Standards |
|
|
GB/T 28026.3-2018 |
Railway applications—Fixed installations—Electrical safety, earthing and the return circuit—Part 3: Mutual interaction of a.c.and d.c.traction sYStems |
YS
China National
Standards |
|
|
GB/T 17215.661-2018 |
Electricity metering data exchange—The DLMS/COSEM suite—Part 61: Object identification sYStem（OBIS） |
YS
China National
Standards |
|
|
GB/T 31070.4-2018 |
Building intercom sYStems—Part 4: Application guidelines |
YS
China National
Standards |
|
|
GB/T 37020-2018 |
Information technology—Telecommunications and information exchange between sYStems—Local and metropolitan area networks—Specific requirements—Medium access control and physical layer specification for video wireless personal area networks（VPAN |
YS
China National
Standards |
|
|
GB 15208.5-2018 |
Micro-dose X-ray security inspection sYStem—Part 5:Backscatter object security inspection system |
YS
China National
Standards |
|
|
GB 15208.4-2018 |
Micro-dose X-ray security inspection sYStem—Part 4:Human body security inspection system |
YS
China National
Standards |
|
|
GB 15208.3-2018 |
Micro-dose X-ray security inspection sYStem—Part 3:Transmission cargo security inspection system |
YS
China National
Standards |
|
|
GB 15208.2-2018 |
Micro-dose X-ray security inspection sYStem—Part 2:Transmission baggage security inspection system |
YS
China National
Standards |
|
|
GB/T 37187-2018 |
Technology requirement of the anti-corrosion materials for desulfurization chimneYS |
YS
China National
Standards |
|
|
GB/T 37205-2018 |
Synchronous belt drives—PulleYS with AT trapezoidal profile system |
YS
China National
Standards |
|
|
GB/T 37203-2018 |
Synchronous belt drives—Belts with AT trapezoidal profile sYStem |
YS
China National
Standards |
|
|
GB/T 37194.1-2018 |
Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 1:Designation sYStem and basis for specifications |
YS
China National
Standards |
|
|
GB/T 37180-2018 |
Gas analYSis—Handling of calibration gases and gas mixtures—Guidelines |
YS
China National
Standards |
|
|
GB/T 37185-2018 |
Gas analYSis—Determination of indoor harmful volatile organic compounds—"SUMMA canister and silonite tube" and chromatography/mass spectrometry（GC/MS） |
YS
China National
Standards |
|
|
GB/T 37186-2018 |
Gas analYSis—Determination of sulfur dioxide and nitrogen oxides—Ultraviolet differential optical absorption spectroscopy |
YS
China National
Standards |
|
|
GB/T 37182-2018 |
Gas analYSis—Gas chromatograph with plasma emission detector |
YS
China National
Standards |
|
|
GB/T 37198-2018 |
Impact-resistant polYStyrene（PS-I）resin |
YS
China National
Standards |
|
|
GB/T 37211.2-2018 |
Methods for chemical analYSis of germanium metal—Part 2：Determination of aluminium,iron,copper,nickle,lead,cadmium, magnesium,cobalt,indium,zinc content—Inductively coupled plasma mass spectrometry method |
YS
China National
Standards |
|
|
GB/T 37211.1-2018 |
Methods for chemical analYSis of germanium metal—Part 1：Determination of arsenic content—Arsenic stain method |
YS
China National
Standards |
|
|
GB/T 37126-2018 |
Test method for structural sealant glazing sYStems（SSGS） |
YS
China National
Standards |
|
|
GB/T 37261-2018 |
Ball joint compensator for district heating sYStem |
YS
China National
Standards |
|
|
GB/T 37164-2018 |
Work performance requirements and evaluation method of auto-guidance sYStems for self-propelled agricultural machinery |
YS
China National
Standards |
|
|
GB/T 19002-2018 |
Quality management sYStems—Guidelines for the application of GB/T 19001—2016 |
YS
China National
Standards |
|
|
GB/T 37227.1-2018 |
Evaluation method and testing method for energy performance of refrigerating sYStems－Part 1：Energy-storage air conditioning systems |
YS
China National
Standards |
|
|
GB/T 36923-2018 |
Identification of pearl powder―X-ray diffraction analYSis |
YS
China National
Standards |
|
|
GB/T 8756-2018 |
Collection of metallographs on defects of germanium crYStal |
YS
China National
Standards |
|
|
GB/T 37076-2018 |
Information security technology—Technical requirements for fingerprint recognition sYStem |
YS
China National
Standards |
|
|
GB/T 37033.3-2018 |
Information security technology—Technical requirements for cryptographic application for radio frequency identification sYStems—Part 3: Technical requirements for key management |
YS
China National
Standards |
|
|
GB/T 37033.2-2018 |
Information security technology—Technical requirements for cryptographic application for radio frequency identification sYStems—Part 2: Technical requirements for cryptographic application for RF tag, reader and communication |
YS
China National
Standards |
|
|
GB/T 37033.1-2018 |
Information security technology—Technical requirements for cryptographic application for radio frequency identification sYStems—Part 1: Cryptographic protection framework and security levels |
YS
China National
Standards |
|
|
GB/T 37002-2018 |
Information security technology-Security techniques requirement for electronic mail sYStem |
YS
China National
Standards |
|
|
GB/T 37095-2018 |
Information security technology—Security basic technical requirements for office information sYStems |
YS
China National
Standards |
|
|
GB/T 37094-2018 |
Information security technology—Security management requirements for office information sYStems |
YS
China National
Standards |
|
|
GB/T 37096-2018 |
Information security technology—Security testing specification for office information sYStems |
YS
China National
Standards |
|
|
GB/T 36935-2018 |
Footwear—Conversion of sizing sYStems |
YS
China National
Standards |
|
|
GB/T 37102-2018 |
Performance indicator sYStem of logistics park |
YS
China National
Standards |
|
|
GB/T 37032-2018 |
Identification sYStem for Internet of things—General principles |
YS
China National
Standards |
|
|
GB/T 37018-2018 |
Specification for data interface of national BeiDou augmentation sYStem data processing center |
YS
China National
Standards |
|
|
GB/T 37019.3-2018 |
Specification for national BeiDou augmentation sYStem dissemination interface—Part 3：Digital audio broadcasting in FM band |
YS
China National
Standards |
|
|
GB/T 37019.2-2018 |
Specification for national BeiDou augmentation sYStem dissemination interface—Part 2：China Mobile Multi-media Broadcasting |
YS
China National
Standards |
|
|
GB/T 37019.1-2018 |
Specification for national BeiDou augmentation sYStem dissemination interface—Part 1：Mobile communication network |
YS
China National
Standards |
|
|
GB/T 37106-2018 |
Palletized unit load-based logistics sYStem—Design criteria of pallets |
YS
China National
Standards |
|
|
GB/T 37159.3-2018 |
Petroleum drilling and production equipment—Offshore self-elevating drilling unit—Part 3:Operation and surveYS |
YS
China National
Standards |
|
|
GB/T 37015.2-2018 |
Performance of high-voltage direct current power transmission sYStem using voltage sourced converters (VSC-HVDC)—Part 2: Transient-state |
YS
China National
Standards |
|
|
GB/T 37015.1-2018 |
Performance of high-voltage direct current power transmission sYStem using voltage sourced converters (VSC-HVDC)—Part1: Steady-state |
YS
China National
Standards |
|
|
GB/T 37155.1-2018 |
Technical guidance of protection and control sYStem on regional power grid—Part 1: Functional specification |
YS
China National
Standards |
|
|
GB/T 36896.2-2018 |
Light duty remotely operated vehicles—Part 2：Manipulators and hydraulic sYStems |
YS
China National
Standards |
|
|
GB/T 36987-2018 |
Testing methods of anti lock braking sYStem(ABS) performance for automobiles |
YS
China National
Standards |
|
|
GB/T 37082-2018 |
Specification for common mixture liquid crYStal materials |
YS
China National
Standards |
|
|
GB/T 786.2-2018 |
Fluid power sYStems and components—Graphical symbols and circuit diagrams—Part 2: Circuit diagrams |
YS
China National
Standards |
|
|
GB/T 2348-2018 |
Fluid power sYStems and components—Cylinder bores and piston rod diameters |
YS
China National
Standards |
|
|
GB/T 37240-2018 |
Test and evaluation methods for light transmission property of cover glass for crYStalline silicon photovoltaic module |
YS
China National
Standards |
|
|
GB/T 37047-2018 |
Lightning density based on lightning location sYStems(LLS)—General principles |
YS
China National
Standards |
|
|
GB/T 36981-2018 |
Railway applications—Technical criteria for the co-ordinations in the passenger train neutral-section passing sYStem with no power consumption |
YS
China National
Standards |
|
|
GB/T 36963-2018 |
Technical specifications for lightning protection of building integrated photovoltaic sYStems |
YS
China National
Standards |
|
|
GBZ/T 189.3-2018 |
Measurement of workplace phYSical factors - Part 3: 1 Hz to 100 kHz - electric and magnetic fields |
YS
China National
Standards |
|
|
GB/T 37137-2018 |
On-site inspections method of a.c.circuit sYStems for 220 kV substations on plateau |
YS
China National
Standards |
|
|
GB/T 37048-2018 |
Technical specification for lightning protection of expressway electromechanical sYStems |
YS
China National
Standards |
|
|
GB/T 36976-2018 |
Textiles－Quantitative chemical analYSis－Mixtures of polyimide with certain other fibers |
YS
China National
Standards |
|
|
GB/T 37138-2018 |
Implementation guide for cyber security classified protection of electric power information sYStem |
YS
China National
Standards |
|
|
GB/T 37153-2018 |
Acoustic vehicle alerting sYStem of electric vehicles running at low speed |
YS
China National
Standards |
|
|
GB/T 37078-2018 |
Technical specifications for access control sYStem |
YS
China National
Standards |
|
|
GB/T 37128-2018 |
Technical requirements for X-ray computed tomography security inspection sYStems |
YS
China National
Standards |
|
|
GB/T 37237-2018 |
Forensic medical assessment for male sexual dYSfunction |
YS
China National
Standards |
|
|
GB/T 37174-2018 |
Test methods for access network—Interoperability of GPON sYStem |
YS
China National
Standards |
|
|
GB/T 37172-2018 |
Test methods for access network equipment—Interoperability of EPON sYStem |
YS
China National
Standards |
|
|
GB/T 37173-2018 |
Technical requirements for access network－Interoperability of GPON sYStem |
YS
China National
Standards |
|
|
GB/T 37083-2018 |
Technical requirements for access network—Interoperability of ethernet passive optical network（EPON）sYStem |
YS
China National
Standards |
|
|
GB/T 37049-2018 |
Test method for the content of metal impurity in electronic grade polYSilicon—Inductively coupled-plasma mass spectrometry method |
YS
China National
Standards |
|
|
GB/T 51293-2018 |
Technical standard for urban rail transit water supply and drainage sYStem |
YS
China National
Standards |
|
|
GB/T 51319-2018 |
Medical process gas sYStem engineering design standards |
YS
China National
Standards |
|
|
GB 51309-2018 |
Technical standards for fire emergency lighting and evacuation indication sYStems |
YS
China National
Standards |
|
|
GB/T 51328-2018 |
Urban comprehensive transportation sYStem planning standard |
YS
China National
Standards |
|
|
GB/T 23003-2018 |
Integration of informatization and industrialization management sYStems—Assessment guidance |
YS
China National
Standards |
|
|
GB/T 36922-2018 |
Determination of organophosphorous flame retardants in toYS—Gas chromatography-mass spectrography method |
YS
China National
Standards |
|
|
GB/T 37080-2018 |
AnalYSis techniques for dependability—Event tree analysis (ETA) |
YS
China National
Standards |
|
|
GB 23200.111-2018 |
National Food Safety Standards - Determination of Residues of AzoxYSulfuron in Plant-derived Foods - Liquid Chromatography-Mass Spectrometry |
YS
China National
Standards |
|
|
GB/T 50381-2018 |
Urban Rail Transit Automatic Ticket Inspection SYStem Engineering Quality Acceptance Standard |
YS
China National
Standards |
|
|
GB/T 51292-2018 |
Wireless communication indoor coverage sYStem engineering technical standards |
YS
China National
Standards |
|
|
GB/T 51281-2018 |
Synchronous Digital Hierarchy (SDH) Optical Fiber Transmission SYStem Engineering Acceptance Criteria |
YS
China National
Standards |
|
|
GB/T 50636-2018 |
Urban rail transit comprehensive monitoring sYStem engineering technical standard |
YS
China National
Standards |
|
|
GB/T 14235.1-2018 |
Low temperature pattern wax material for investment casting—Part 1: Testing methods for phYSical properties |
YS
China National
Standards |
|
|
GB/T 16716.2-2018 |
Packaging and the environment—Part 2：Optimization of the packaging sYStem |
YS
China National
Standards |
|
|
GB/T 5170.13-2018 |
Inspection methods for environmental testing equipments—Part 13: Mechanical vibrating type sYStem for vibration(sinusoidal) test |
YS
China National
Standards |
|
|
GB/T 5170.15-2018 |
Inspection methods for environmental testing equipments—Part 15：Hydraulic vibrating type sYStem for vibration(sinusoidal) test |
YS
China National
Standards |
|
|
GB 50364-2018 |
Technical standards for application of solar water heating sYStems for civil buildings |
YS
China National
Standards |
|
|
GB/T 6809.10-2018 |
Reciprocating internal combustion engines—Vocabulary of components and sYStems—Part 10: Ignition systems |
YS
China National
Standards |
|
|
GB/T 35451.2-2018 |
Polypropylene(PP) structure-wall piping sYStems for underground drainage and sewerage—Part 2: Polypropylene spirally enwound structure-wall pipes |
YS
China National
Standards |
|
|
GB/T 4059-2018 |
Test method for phosphorus content in polycrYStalline silicon by zone-melting method under controlled atmosphere |
YS
China National
Standards |
|
|
GB/T 31057.3-2018 |
Granular materials—PhYSical properties—Part 3: Fluidity index |
YS
China National
Standards |
|
|
GB/T 31057.2-2018 |
Granular materials—PhYSical properties—Part 2: Determination of tap density |
YS
China National
Standards |
|
|
GB/T 31070.2-2018 |
Building intercom sYStems—Part 2: Technical requirements for digital building intercom systems |
YS
China National
Standards |
|
|
GB/T 21431-2015/XG1-2018 |
Technical code for inspection of lightning protection sYStem in building |
YS
China National
Standards |
|
|
GB/T 11361-2018 |
Synchronous belt drives—Trapezoidal toothed pulleYS with pitch code MXL,XXL,XL,L,H,XH and XXH |
YS
China National
Standards |
|
|
GB/T 16855.1-2018 |
Safety of machinery—Safety-related parts of control sYStems—Part 1: General principles for design |
YS
China National
Standards |
|
|
GB/T 10801.2-2018 |
Rigid extruded polYStyrene foam board for thermal insulation(XPS) |
YS
China National
Standards |
|
|
GB/T 28026.2-2018 |
Railway applications—Fixed installations—Electrical safety，earthing and the return circuit—Part 2：Provisions against the effects of stray currents caused by d.c. traction sYStems |
YS
China National
Standards |
|
|
GB/T 19115.1-2018 |
Wind-solar photovoltaic hybrid generate electricity sYStem—Part 1: Technology condition |
YS
China National
Standards |
|
|
GB 15208.1-2018 |
Micro-dose X-ray security inspection sYStem—Part 1:General technical requirements |
YS
China National
Standards |
|
|
GB/T 25606-2010/XG1-2018 |
Earth-moving machinery - Product identification numbering sYStem |
YS
China National
Standards |
|
|
GB/T 21152-2018 |
Earth-moving machinery—Wheeled or high-speed rubber-tracked machines—Performance requirements and test procedures for brake sYStems |
YS
China National
Standards |
|
|
GB/T 36234-2018 |
Qualification testing of welders for fusion welding ontitanium and titanium alloYS，zirconium and zirconium alloys |
YS
China National
Standards |
|
|
GB/T 36167-2018 |
Method for coal preparation laboratory timed-release flotation analYSis |
YS
China National
Standards |
|
|
GB 12352-2018 |
Safety code for passengers aerial ropewaYS |
YS
China National
Standards |
|
|
GB/T 36160.1-2018 |
Technical specification for distributed energy sYStem of combined cooling, heating and power—Part 1：Refrigeration and heating subsystem |
YS
China National
Standards |
|
|
GB/T 36147.2-2018 |
Security management sYStems for the supply chain—Electronic port clearance(EPC)—Part 2:Core data elements |
YS
China National
Standards |
|
|
GB/T 36147.1-2018 |
Security management sYStems for the supply chain—Electronic port clearance(EPC)—Part 1: Message structures |
YS
China National
Standards |
|
|
GB/T 36216-2018 |
Ships and marine technology—Ship recycling management sYStems—Measures to prevent asbestos emission and exposure during ship recycling |
YS
China National
Standards |
|
|
GB/T 36160.2-2018 |
Technical specification for distributed energy sYStem of combined cooling，heating and power－Part 2：Power subsystem |
YS
China National
Standards |
|
|
GB/T 19292.2-2018 |
Corrosion of metals and alloYS—Corrosivity of atmospheres—Part 2: Guiding values for the corrosivity categories |
YS
China National
Standards |
|
|
GB/T 8013.1-2018 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloYS—Part 1: Anodic oxide coatings |
YS
China National
Standards |
|
|
GB/T 19292.1-2018 |
Corrosion of metals and alloYS—Corrosivity of atmospheres—Part 1: Classification, determination and estimation |
YS
China National
Standards |
|
|
GB/T 14986.1-2018 |
Soft magnetic alloYS—Part 1：General requirements |
YS
China National
Standards |
|
|
GB/T 36215-2018 |
Ships and marine technology—Ship recycling management sYStems—Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations |
YS
China National
Standards |
|
|
GB/T 36208-2018 |
Anticorrosion lining technical requirements and procedure evaluation for industrial exhaust gas sYStems |
YS
China National
Standards |
|
|
GB/T 36211.1-2018 |
Intelligent measuring and control device in full-distributed industrial control sYStem—Part 1:General technical requirements |
YS
China National
Standards |
|
|
GB/T 36211.2-2018 |
Intelligent measuring and control device in full-distributed industrial control sYStem—Part 2:Communication interoperability test specification |
YS
China National
Standards |
|
|
GB/T 35077-2018 |
Safety of machinery—Local exhaust ventilation sYStem—Safety requirements |
YS
China National
Standards |
|
|
GB/T 36282-2018 |
Electromagnetic compatibility requirements and test methods of drive motor sYStem for electric vehicles |
YS
China National
Standards |
|
|
GB/T 36285-2018 |
Specification of steam turbine electro-hydraulic control sYStem for thermal power plant |
YS
China National
Standards |
|
|
GB/T 8013.3-2018 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloYS—Part 3: Organic polymer coatings |
YS
China National
Standards |
|
|
GB/T 20975.11-2018 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 11：Determination of lead content |
YS
China National
Standards |
|
|
GB/T 14986.5-2018 |
Soft magnetic alloYS—Part 5：Iron-aluminium alloys |
YS
China National
Standards |
|
|
GB/T 8013.2-2018 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloYS—Part 2: Combined coatings |
YS
China National
Standards |
|
|
GB/T 6609.1-2018 |
Chemical analYSis methods and determination of physical performance of alumina—Part 1：Determination of trace elements content—Inductively coupled plasma atomic emission spectrometry method |
YS
China National
Standards |
|
|
GB/T 35046-2018 |
Technical specification for the production of national cotton color grade phYSical standard |
YS
China National
Standards |
|
|
GB/T 4949-2018 |
Chemical analYSis methods for sacrificial anodes of Al-Zn-In system alloy |
YS
China National
Standards |
|
|
GB/T 35088-2018 |
Plain bearings—Tin casting alloYS for multilayer plain bearings |
YS
China National
Standards |
|
|
GB/T 36390-2018 |
Reagent enzyme—LYSozyme |
YS
China National
Standards |
|
|
GB/T 36469-2018 |
Information technology—Telecommunications and information exchange between sYStems local and metropolitan area networks—Specific requirements—Medium access control (MAC) and physical layer (PHY) specification for Q frequency band ultra high speed wi |
YS
China National
Standards |
|
|
GB/T 36468-2018 |
Internet of things—General principles of stipulation on evaluation indicator sYStem |
YS
China National
Standards |
|
|
GB/T 25056-2018 |
Information security technology—Specifications of cryptograph and related security technology for certificate authentication sYStem |
YS
China National
Standards |
|
|
GB/T 19746-2018 |
Corrosion of metals and alloYS—Alternate immersion test in salt solution |
YS
China National
Standards |
|
|
GB/T 36464.5-2018 |
Information technology—Intelligent speech interaction sYStem—Part 5：In-vehicle terminal |
YS
China National
Standards |
|
|
GB/T 36470-2018 |
Information security technology—Common security functional requirements for data acquisition and control field devices of industrial control sYStems |
YS
China National
Standards |
|
|
GB/T 35098-2018 |
Microbeam analYSis—Transmission electron microscopy—Morphological identification method of plant viruses by transmission electron microscopy |
YS
China National
Standards |
|
|
GB/T 36206-2018 |
Formula feed for yellow croaker（LarimichthYS crocea Richardson） |
YS
China National
Standards |
|
|
GB/T 35031.2-2018 |
Customer energy management sYStem—Part 2: Functional specification of master station |
YS
China National
Standards |
|
|
GB/T 35031.1-2018 |
Customer energy management sYStem—Part 1: Guideline |
YS
China National
Standards |
|
|
GB/T 35031.301-2018 |
Customer energy management sYStem—Part 3-1: General requirements for subsystem gateway |
YS
China National
Standards |
|
|
GB/T 35099-2018 |
Microbeam analYSis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air |
YS
China National
Standards |
|
|
GB/T 36141-2018 |
Methods for phase composition analYSis of calcined gypsum |
YS
China National
Standards |
|
|
GB/T 35097-2018 |
Microbeam analYSis—Scanning electron microscopy with energy dispersive X-ray spectrosmetry—Determination of numberical concentration of inorganic fibrous particles in ambient air |
YS
China National
Standards |
|
|
GB/T 35018-2018 |
Classification and grading for civil unmanned aircraft sYStem |
YS
China National
Standards |
|
|
GB/T 35056-2018 |
Technical specifications for rock bolting in coal mine roadwaYS |
YS
China National
Standards |
|
|
GB/T 36270-2018 |
Technical specification for monitoring and control sYStem of microgrids |
YS
China National
Standards |
|
|
GB/T 19557.19-2018 |
Guidelines for the conduct of tests for distinctness, uniformity and stability—ChrYSanthemum Chrysanthemum × morifolium Ramat.（Chrysanthemum × grandiflorum Ramat.），Chrysanthemum pacificum Nakai(Ajania pacifica Bremer and Humphries)and hybrids b |
YS
China National
Standards |
|
|
GB/T 19557.24-2018 |
Guidelines for the conduct of tests for distinctness, uniformity and stability—Maize（Zea maYS L.） |
YS
China National
Standards |
|
|
GB/T 34542.2-2018 |
Storage and transportation sYStems for gaseous hydrogen—Part 2: Test methods for evaluating metallic material compatibility in hydrogen atmosphere |
YS
China National
Standards |
|
|
GB/T 34542.3-2018 |
Storage and transportation sYStems for gaseous hydrogen—Part 3: Test method for determination of the susceptibility of metallic materials to hydrogen gas embrittlement (HGE) |
YS
China National
Standards |
|
|
GB/T 36272-2018 |
Eco-efficiency assessment of electrical and electronic product sYStem—Principles,requirements and guidelines |
YS
China National
Standards |
|
|
GB/T 36274-2018 |
Technical specification for energy management sYStem of microgrids |
YS
China National
Standards |
|
|
GB/T 24338.6-2018 |
Railway applications—Electromagnetic compatibility—Part 5: Emission and immunity of fixed power supply apparatus and sYStems |
YS
China National
Standards |
|
|
GB/T 36159-2018 |
Guideline for the selection of coating types, tests and methods of assessing the performance of anodic oxide coatings and organic polymer coatings on aluminium and its alloYS in architectural applications |
YS
China National
Standards |
|
|
GB/T 36120-2018 |
Production label for child restraint sYStem of power-driven vehicles |
YS
China National
Standards |
|
|
GB/T 36124-2018 |
Model coding rules and identification number of child restraint sYStem |
YS
China National
Standards |
|
|
GB/T 35071-2018 |
Guideline for energy sYStems optimization |
YS
China National
Standards |
|
|
GB/T 36402-2018 |
Thermal analYSis-mass spectrometry coupling method for ceramics materials |
YS
China National
Standards |
|
|
GB/T 6609.12-2018 |
Chemical analYSis methods and determination of physical performance of alumina—Part 12：Determination of zinc oxide content—Flame atomic absorption spectrometry method |
YS
China National
Standards |
|
|
GB/T 36401-2018 |
Surface chemical analYSis—X-ray photoelectron spectroscopy—Reporting of results of thin-film analysis |
YS
China National
Standards |
|
|
GB/T 20975.2-2018 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part2: Determination of arsenic content |
YS
China National
Standards |
|
|
GB/T 6609.19-2018 |
Chemical analYSis methods and determination of physical performance of alumina—Part 19：Determination of lithium oxide content—Flame atomic absorption spectrometry method |
YS
China National
Standards |
|
|
GB/T 20975.1-2018 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 1：Determination of mercury content |
YS
China National
Standards |
|
|
GB/T 34680.4-2018 |
Evaluation model and general evaluation indicator sYStem for smart cities—Part 4：Construction management |
YS
China National
Standards |
|
|
GB/T 36413.1-2018 |
Automation sYStem-Embedded smart controller-Part1：General requirements |
YS
China National
Standards |
|
|
GB/T 15970.1-2018 |
Corrosion of metals and alloYS—Stress corrosion testing—Part 1: General guidance on testing procedures |
YS
China National
Standards |
|
|
GB/T 20975.27-2018 |
Methods for chemical analYSis of aluminium and aluminium alloys—Part 27：Determination of cerium,lanthanum,scandium—Inductively coupled plasma atomic emission spectrometry method |
YS
China National
Standards |
|
|
GB/T 36173-2018 |
Restrained joint sYStems for ductile iron pipelines—Design rules and type testing |
YS
China National
Standards |
|
|
GB/T 19292.4-2018 |
Corrosion of metals and alloYS—Corrosivity of atmospheres—Part 4: Determination of corrosion rate of standard specimens for the evaluation of corrosivity |
YS
China National
Standards |
|
|
GB/T 6609.6-2018 |
Chemical analYSis methods and determination of physical performance of alumina—Part 6：Determination of potassium oxide content |
YS
China National
Standards |
|
|
GB/T 36464.4-2018 |
Information technology—Intelligent speech interaction sYStem—Part 4：Mobile terminal |
YS
China National
Standards |
|
|
GB/T 36464.2-2018 |
Information technology—Intelligent speech interaction sYStem—Part 2: Intelligent home appliances |
YS
China National
Standards |
|
|
GB/T 36466-2018 |
Information security technology—Implementation guide to risk assessment of industrial control sYStems |
YS
China National
Standards |
|
|
GB/T 36416.3-2018 |
Testing machine vocabulary—Part3： Vibration test sYStem and shock testing machines |
YS
China National
Standards |
|
|
GB/T 19292.3-2018 |
Corrosion of metals and alloYS—Corrosivity of atmospheres—Part 3: Measurement of environmental parameters affecting corrosivity of atmospheres |
YS
China National
Standards |
|
|
GB/T 36174-2018 |
Corrosion of metals and alloYS—Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys |
YS
China National
Standards |
|
|
GB/T 21671-2018 |
Ethernet technology based local area network(LAN) sYStems acceptance test methods |
YS
China National
Standards |
|
|
GB/T 36449-2018 |
General requirements for electronic examination room sYStem |
YS
China National
Standards |
|
|
GB/T 36454-2018 |
Information technology—Telecommunications and information exchange between sYStems—Medium access control and physical layer specifications for middle-high throughput wireless local area network |
YS
China National
Standards |
|
|
GB/T 1175-2018 |
Casting zinc alloYS |
YS
China National
Standards |
|
|
GB/T 36504-2018 |
Guide for the analYSis of the printed circuit board surface contamination—Auger electron spectroscopy |
YS
China National
Standards |
|
|
GB/T 22137.2-2018 |
Valve positioners for industrial process control sYStems—Part 2: Methods of evaluating the performance of intelligent valve positioners |
YS
China National
Standards |
|
|
GB/T 36451-2018 |
Information technology—Telecommunications and information exchange between sYStems—Community energy-saving control network protocol |
YS
China National
Standards |
|
|
GB/T 36378.1-2018 |
Classifications and codes for sensors—Part 1：PhYSical sensors |
YS
China National
Standards |
|
|
GB/T 18978.143-2018 |
Ergonomics of human-sYStem interaction—Part 143: Forms |
YS
China National
Standards |
|
|
GB/T 36490-2018 |
Wind turbines—Technical specification of lightning protection sYStem inspection |
YS
China National
Standards |
|
|
GB/T 25975-2018 |
Rock wool products for external thermal insulation composite sYStems (ETICS) |
YS
China National
Standards |
|
|
GB 10494-2018 |
Technical specification for crossing signal equipment in waYSide |
YS
China National
Standards |
|
|
GB/T 36461-2018 |
Internet of things identification sYStem—Guideline for OID application |
YS
China National
Standards |
|
|
GB/T 36464.3-2018 |
Information technology—Intelligent speech interaction sYStem—Part 3: Intelligent customer service |
YS
China National
Standards |
|
|
GB/T 36374.1-2018 |
Plastics-Sulfone polymer moulding and extrusion materials—Part1:Designation sYStem and basis for specifications |
YS
China National
Standards |
|
|
GB/T 15453-2018 |
Determination of chloride in water for industrial circulating cooling sYStem and boiler |
YS
China National
Standards |
|
|
GB/T 36302-2018 |
E-commerce credit—Requirements of integrity management sYStem for the seller-managed retailing transaction platform |
YS
China National
Standards |
|
|
GB/T 31232.1-2018 |
E-commerce statistical indicator sYStem—Part1:Overall |
YS
China National
Standards |
|
|
GB/T 36304-2018 |
E-commerce credit—Requirements of integrity management sYStem for the 3rd part online retailing platform |
YS
China National
Standards |
|
|
GB/T 36465-2018 |
General technique requirements of network terminal operating sYStem |
YS
China National
Standards |
|
|
GB/T 36467-2018 |
Reliability growth—Stress testing for early failures in unique complex sYStems |
YS
China National
Standards |
|
|
GB/T 6909-2018 |
AnalYSis of water used in boiler and cooling system—Determination of hardness |
YS
China National
Standards |
|
|
GB/T 6908-2018 |
AnalYSis of water used in boiler and cooling system—Determination of electrical conductivity |
YS
China National
Standards |
|
|
GB/T 36382-2018 |
Treatment and disposal method for waste mercury catalYSt |
YS
China National
Standards |
|
|
GB/T 14986.3-2018 |
Soft magnetic alloYS—Part 3：Iron-cobalt alloys |
YS
China National
Standards |
|
|
GB/T 14986.4-2018 |
Soft magnetic alloYS—Part 4：Iron-chromium alloys |
YS
China National
Standards |
|
|
GB/T 12690.15-2018 |
Chemical analYSis methods for non-rare earth impurities of rare earth metals and their oxides―Part 15: Determination of calcium content |
YS
China National
Standards |
|
|
GB/T 26645.4-2018 |
Particle size analYSis—Gravitational liquid sedimentation methods—Part 4:Balance method |
YS
China National
Standards |
|
|
GB/T 36541-2018 |
Cerium-aluminium alloYS |
YS
China National
Standards |
|
|
GB/T 5094.2-2018 |
Industrial sYStems, installations and equipment and industrial products-Structuring principles and reference designations—Part 2: Classification of objects and codes for classes |
YS
China National
Standards |
|
|
GB/T 5094.1-2018 |
Industrial sYStems,installations and equipment and industrial products—Structuring principles and reference designations—Part 1: Basic rules |
YS
China National
Standards |
|
|
GB/T 36311-2018 |
Electronic commerce management sYStem—Requirements |
YS
China National
Standards |
|
|
GB/T 36410.1-2018 |
Energy consumption evaluation methods of port equipment—Part 1:QuaYSide container crane |
YS
China National
Standards |
|
|
GB/T 36547-2018 |
Technical rule for electrochemical energy storage sYStem connected to power grid |
YS
China National
Standards |
|
|
GB/T 36545-2018 |
Technical requirements for mobile electrochemical energy storage sYStem |
YS
China National
Standards |
|
|
GB/T 36548-2018 |
Test specification for electrochemical energy storage sYStem connected to power grid |
YS
China National
Standards |
|
|
GB/T 36544-2018 |
Proton exchange membrane fuel cell power supply sYStem for power distribution substation |
YS
China National
Standards |
|
|
GB/T 36546-2018 |
Intrusion and hold-up sYStems—Technical requirements for warning devices |
YS
China National
Standards |
|
|
GB 5135.7-2018 |
Automatic sprinkler sYStems—Part 7: Water flow indicators |
YS
China National
Standards |
|
|
GB/T 3367.4-2018 |
Glossary of terms for diesel locomotive—Part 4:Hydraulic transmission sYStem |
YS
China National
Standards |
|
|
GB/T 36558-2018 |
General technical requirements for electrochemical energy storage sYStem in power system |
YS
China National
Standards |
|
|
GB/T 36522-2018 |
Electrical controlling sYStem for separation machinery—General technology requriements |
YS
China National
Standards |
|
|
GB/T 36420-2018 |
Tissue paper and products—Safety assessment management sYStem of chemicals and materials |
YS
China National
Standards |
|
|
GB/T 24841-2018 |
Technical specification for capacitor voltage transformers of 1000kV AC sYStem |
YS
China National
Standards |
|
|
GB/T 17948.6-2018 |
Rotating electrical machines—Functional evaluation of insulation sYStems—Test procedures for form-wound windings—Evaluation of thermomechanical endurance of insulation systems |
YS
China National
Standards |
|
|
GB/T 36432-2018 |
SYStem architecture and reference model of intelligent household appliances |
YS
China National
Standards |
|
|
GB/T 36424.1-2018 |
Interface requirements of IoT household electrical appliance—Part 1:Interface between control sYStem and communication module |
YS
China National
Standards |
|
|
GB/T 36369-2018 |
Information and documentation—Digital object identifier sYStem |
YS
China National
Standards |
|
|
GB/T 24844-2018 |
Technical specification for oil-immersed shunt reactor of 1000kV AC sYStem |
YS
China National
Standards |
|
|
GB/T 24839-2018 |
Technical specification of post insulators for 1000kV a.c.sYStem |
YS
China National
Standards |
|
|
GB/T 24845-2018 |
Specification of metal–oxide surge arresters without gaps for 1000kV a.c. sYStem |
YS
China National
Standards |
|
|
GB/T 36429-2018 |
SYStem architecture and application model of IoT household electrical appliance |
YS
China National
Standards |
|
|
GB/T 36482-2018 |
Ships and marine technology—Ship recycling management sYStems—Guidelines for the implementation of GB/T 33800 |
YS
China National
Standards |
|
|
GB/T 24840-2018 |
Technical specification for bushings of 1000kV AC sYStem |
YS
China National
Standards |
|
|
GB/T 17948.1-2018 |
Rotating electrical machines—Functional evaluation of insulation sYStems—Test procedures for wire-wound windings—Thermal evaluation and classification |
YS
China National
Standards |
|
|
GB/T 36561-2018 |
Technique requirement and evaluation sYStem of cleaning and energy saving heat treatment equipment |
YS
China National
Standards |
|
|
GB/T 24338.2-2018 |
Railway applications—Electromagnetic compatibility—Part 2: Emission of the whole railway sYStem to the outside world |
YS
China National
Standards |
|
|
GB/T 36289.1-2018 |
Insulating films of crYStalline silicon photovoltaic(PV) modules—Part 1：Polyethylene terephthalate films |
YS
China National
Standards |
|
|
GB 5135.5-2018 |
Automatic sprinkler sYStems—Part 5: Deluge alarm valves |
YS
China National
Standards |
|
|
GB/T 36553-2018 |
Basic functional requirements for application sYStem of smart residing |
YS
China National
Standards |
|
|
GB/T 36289.2-2018 |
Insulating films of crYStalline silicon photovoltaic (PV) modules—Part 2:Fluorine plastic films |
YS
China National
Standards |
|
|
GB/T 36287-2018 |
Urban rail transit—Ground sYStem for vehicle braking regenerative energy utilization |
YS
China National
Standards |
|
|
GB/T 36284-2018 |
Railway applications—Electrical sYStem of platform edge door |
YS
China National
Standards |
|
|
GB/T 36286-2018 |
Railway application—Auxiliary power supply sYStem for rolling stock |
YS
China National
Standards |
|
|
GB/T 36330-2018 |
Information technology—Technical requirements of wireless sensor network sYStem for gas meter remote management |
YS
China National
Standards |
|
|
GB/T 36555.1-2018 |
Interface specification for application sYStem of smart residing—Part 1: Interface based on REST |
YS
China National
Standards |
|
|
GB/T 36531-2018 |
Production site visual management sYStem technical specification |
YS
China National
Standards |
|
|
GB/T 36293-2018 |
Specification of distributed control sYStem for thermal power plant |
YS
China National
Standards |
|
|
GB/T 30996.3-2018 |
Information technology—Real-time locating sYStems—Part 3 : 433MHz air interface protocol |
YS
China National
Standards |
|
|
GB/T 36441-2018 |
Specication for compatibility between hardware and operation sYStem |
YS
China National
Standards |
|
|
GB/T 17614.3-2018 |
Transmitters for use in industrial-process control sYStems—Part 3: Methods for performance evaluation of intelligent transmitters |
YS
China National
Standards |
|
|
GB/T 36440-2018 |
Information technology—Telecommunications and information exchange between sYStems local and metropolitan area networks—Specific requirements—Low-rate wireless personal area network physical layer(PHY) specification for anti-interference |
YS
China National
Standards |
|
|
GB/Z 36442.3-2018 |
Information technology—Radio frequency identification for item management—Implementation guidelines—Part 3: Implementation and operation of UHF RFID interrogators sYStem in logistics applications |
YS
China National
Standards |
|
|
GB/T 36443-2018 |
Information technology—Framework for specifying a common access profile(CAP) of needs and capabilities of users,sYStems and their environments |
YS
China National
Standards |
|
|
GB/T 36444-2018 |
Information technology—Open sYStems interconnection—Simple directory protocol and service |
YS
China National
Standards |
|
|
GB/T 36323-2018 |
Information security technology—Security management fundamental requirements for industrial control sYStems |
YS
China National
Standards |
|
|
GB/T 36324-2018 |
Information security technology—Information security classification specifications of industrial control sYStems |
YS
China National
Standards |
|
|
GB/T 29811.2-2018 |
Information technology—Learning, education and training—Learning sYStem architecture and service interface—Part 2: Education management information service interface |
YS
China National
Standards |
|
|
GB/T 21711.7-2018 |
Electromechanical elementary relaYS—Part 7:Test and measurement procedures |
YS
China National
Standards |
|
|
GB/T 29811.3-2018 |
Information technology—Learning, education and training—Learning sYStem architecture and services interfaces—Part 3: Resource accessing services interfaces |
YS
China National
Standards |
|
|
GB/T 25102.12-2018 |
Electroacoustics—Hearing aids—Part 12: Dimensions of electrical connector sYStems |
YS
China National
Standards |
|
|
GB/T 1177-2018 |
Casting magnesium alloYS |
YS
China National
Standards |
|
|
GB/T 36433-2018 |
Textiles—DNA quantitative analYSis of cashmere and wool mixture—Fluorescence PCR method |
YS
China National
Standards |
|
|
GB/T 36592-2018 |
Methods for chemical analYSis of rhodium—Determination of platinum, ruthenium, iridium, palladium, gold, silver, copper, iron, nickel, aluminum, lead, manganese, magnesium, tin, zinc, silicon contents—Inductively coupled plasma mass spectrometry |
YS
China National
Standards |
|
|
GB/T 5274.1-2018 |
Gas analYSis—Preparation of calibration gas mixtures—Part 1:Gravimetric method for class I mixtures |
YS
China National
Standards |
|
|
GB/T 19115.2-2018 |
Wind-solar photovoltaic hybird genertate electricity sYStem—Part 2: Test methods |
YS
China National
Standards |
|
|
GB/T 36800.1-2018 |
Plastics—Thermomechanical analYSis(TMA)—Part 1:General principles |
YS
China National
Standards |
|
|
GB/T 36804-2018 |
Liquid silicone rubber—Classification and sYStem nomenclature |
YS
China National
Standards |
|
|
GB/T 36800.2-2018 |
Plastics—Thermomechanical analYSis(TMA)—Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
YS
China National
Standards |
|
|
GB/T 36779-2018 |
Detection and identification of Fusarium oxYSporum f. sp. apii |
YS
China National
Standards |
|
|
GB/T 36626-2018 |
Information security technology—Management guide for secure operation and maintenance of information sYStems |
YS
China National
Standards |
|
|
GB/T 36810-2018 |
Detection and identification of Fusarium oxYSporum (Schlecht.) f. sp. Fragariae Winks & Williams |
YS
China National
Standards |
|
|
GB/T 3884.20-2018 |
Methods for chemical analYSis of copper concentrates—Part 20:Determination of mercury content—Solid sampling and direct mercury analysis method |
YS
China National
Standards |
|
|
GB/T 36590-2018 |
Method for chemical analYSis of high purity silver—Determination of trace impurity elements contents—Glow discharge mass spectrometry |
YS
China National
Standards |
|
|
GB/T 36593-2018 |
Method for chemical analYSis of iridium powder—Determination of silver, gold, palladium, rhodium, ruthenium, lead, platinum, nickel, copper, iron, tin, zinc, magnesium, manganese, aluminum contents —Inductively coupled plasma atomic emission spectrome |
YS
China National
Standards |
|
|
GB/T 12690.19-2018 |
Chemical analYSis methods for non-rare earth impurities of rare earth metals and their oxides—Part 19: Determination of arsenic and mercury contents |
YS
China National
Standards |
|
|
GB/T 36572-2018 |
Guidelines of cyber security protection for electric power sYStem supervision and control |
YS
China National
Standards |
|
|
GB/T 36579-2018 |
Load test method of cantilever sYStem for self-elevating drilling unit |
YS
China National
Standards |
|
|
GB/T 36628.1-2018 |
Information technology—Telecommunications and information exchange between sYStems—Visible light communication—Part 1：General requirements of media access control and physical layer |
YS
China National
Standards |
|
|
GB/T 36674-2018 |
General technical requirements for the energy construction monitoring sYStem in public institutions |
YS
China National
Standards |
|
|
GB/T 36713-2018 |
Energy management sYStems—Energy baselines and energy performance indicators |
YS
China National
Standards |
|
|
GB/T 36604-2018 |
Identification sYStem for internet of things—Ecode platform access specifications |
YS
China National
Standards |
|
|
GB/T 36605-2018 |
Identification sYStem for internet of things—Ecode resolution specifications |
YS
China National
Standards |
|
|
GB/T 36630.3-2018 |
Information security technology—Controllability evaluation index for security of information technology products—Part 3: Operating sYStem |
YS
China National
Standards |
|
|
GB/T 36601-2018 |
Information description of product for electronic commerce transaction—ToYS |
YS
China National
Standards |
|
|
GB/T 36648-2018 |
Specification for TFT liquid crYStal monomers |
YS
China National
Standards |
|
|
GB/T 36585-2018 |
Method of dynamic wind uplift test for external thermal insulation composite sYStems |
YS
China National
Standards |
|
|
GB/T 36583-2018 |
Determination of the resistance to penetration of external thermal insulation composite sYStems |
YS
China National
Standards |
|
|
GB/T 4103.17-2018 |
Method for chemical analYSis of lead and lead alloys—Part 17: Determination of sodium, magnesium contents—Flame atomic absorption spectrometry |
YS
China National
Standards |
|
|
GB/T 36647-2018 |
Specification for liquid crYStal monomers |
YS
China National
Standards |
|
|
GB/T 36652-2018 |
Specification for TFT liquid crYStal mixtures |
YS
China National
Standards |
|
|
GB/T 26857.4-2018 |
Information technology—Open sYStems interconnection—Methods for testing and specification(MTS)—The testing and test control notation—Version 3一Part 4: TTCN-3 operational semantics |
YS
China National
Standards |
|
|
GB/T 3884.21-2018 |
Methods for chemical analYSis of copper concentrates－Part 21:Determination of copper,sulfur,lead,zinc,iron, aluminium,calcium,magnesium,manganese content－Wavelength dispersive X-ray fluorescence spectrometric method |
YS
China National
Standards |
|
|
GB/T 36730-2018 |
Technical specification for video on demand sYStem in song and dance entertainment places |
YS
China National
Standards |
|
|
GB/T 36766-2018 |
Performance test methods of deoxidation for Pt-Pd based deoxidation catalYSt |
YS
China National
Standards |
|
|
GB/T 36655-2018 |
Test method for alpha crYStalline silicon dioxide content of spherical silica powder for electronic packaging—XRD method |
YS
China National
Standards |
|
|
GB/T 4060-2018 |
Test method for boron content in polycrYStalline silicon by vacuum zone-melting method |
YS
China National
Standards |
|
|
GB/T 26071-2018 |
MonocrYStalline silicon wafers for solar cells |
YS
China National
Standards |
|
|
GB/T 12964-2018 |
MonocrYStalline silicon polished wafers |
YS
China National
Standards |
|
|
GB/T 36495-2018 |
Test method for phYSical properties of raw material of sintered brick and tile |
YS
China National
Standards |
|
|
GB/T 28766-2018 |
Natural gas—Performance evaluation for analytical sYStems |
YS
China National
Standards |
|
|
GB/T 36659-2018 |
Design requirements of cantilever skidding sYStem for self-elevating drilling unit |
YS
China National
Standards |
|
|
GB 5135.9-2018 |
Automatic sprinkler sYStem—Part 9：Early suppression fast response (ESFR) sprinklers |
YS
China National
Standards |
|
|
GB/T 12965-2018 |
MonocrYStalline silicon as cut wafers and lapped wafers |
YS
China National
Standards |
|
|
GB/T 36706-2018 |
PolycrYStalline indium phosphide |
YS
China National
Standards |
|
|
GB/T 25076-2018 |
MonocrYStalline silicon for solar cell |
YS
China National
Standards |
|
|
GB/T 36662-2018 |
Selective catalytic reduction exhaust treatment sYStem of marine diesel engine |
YS
China National
Standards |
|
|
GB/T 36673-2018 |
Design requirements of drill floor skidding sYStem for self-elevating drilling uint |
YS
China National
Standards |
|
|
GB/T 25686-2018 |
Earth-moving machinery—Safety requirements for remote operator control sYStems |
YS
China National
Standards |
|
|
GB/T 35961-2018 |
Test method of phYSical properties for titanium oxide type sulfur recovery catalysts |
YS
China National
Standards |
|
|
GB/T 35935-2018 |
Measurement of the mean and distribution of animal fibre diameter—Laserscan fibre diameter analYSis method |
YS
China National
Standards |
|
|
GB/T 35931-2018 |
Test method for neps and short fiber content of cotton fibers—Photoelectric analYSer |
YS
China National
Standards |
|
|
GB/T 35972-2018 |
Energy-saving commissioning method of heating and air conditioning sYStem |
YS
China National
Standards |
|
|
GB/T 35983-2018 |
General specifications of dust removal sYStem for coal sample preparation |
YS
China National
Standards |
|
|
GB/T 35985-2018 |
Calculation of analYSes to different bases for coal |
YS
China National
Standards |
|
|
GB/T 6098-2018 |
Test method for length of cotton fibres—Roller analYSer |
YS
China National
Standards |
|
|
GB/T 35860-2018 |
Gas analYSis—Contents of certificates for calibration gas mixtures |
YS
China National
Standards |
|
|
GB/T 35861-2018 |
Gas analYSis—General quality assurance aspects in the use of calibration gas mixtures—Guidelines |
YS
China National
Standards |
|
|
GB/T 35940-2018 |
Seawater cultured pearl oYSters and classification of pearls |
YS
China National
Standards |
|
|
GB/T 35847-2018 |
Switchable glazing filmed by polymer dispersed liquid crYStal |
YS
China National
Standards |
|
|
GB/T 13017-2018 |
Guidelines for preparing enterprise standard sYStem diagram |
YS
China National
Standards |
|
|
GB/T 13016-2018 |
Principles and requirements for constructing standard sYStem |
YS
China National
Standards |
|
|
GB 5135.6-2018 |
Automatic sprinkler sYStems—Part 6: Conventional valves |
YS
China National
Standards |
|
|
GB/T 35887-2018 |
AnalYSis method of white granulated sugar |
YS
China National
Standards |
|
|
GB/T 35960-2018 |
CatalYSts titanium oxide type for sulfur recovery |
YS
China National
Standards |
|
|
GB/T 13663.3-2018 |
Polyethylene(PE)piping sYStems for water supply—Part 3: Fittings |
YS
China National
Standards |
|
|
GB/T 16895.34-2018 |
Low-voltage electrical installations—Part 7-753: Requirements for special installations or locations—Heating cables and embedded heating sYStems |
YS
China National
Standards |
|
|
GB/T 13663.5-2018 |
Polyethylene (PE) piping sYStems for water supply—Part 5: Fitness for purpose of the system |
YS
China National
Standards |
|
|
GB/T 13663.2-2018 |
Polyethylene(PE) piping sYStems for water supply—Part2: Pipes |
YS
China National
Standards |
|
|
GB/T 11048-2018 |
Textiles－PhYSiological effects－Measurement of thermal and water-vapour resistance under steady-state conditions(sweating guarded-hotplate test) |
YS
China National
Standards |
|
|
GB/T 35881-2018 |
Inspection of grain and oils—Determination of yellow-colored kernelof paddy—Image analYSis method |
YS
China National
Standards |
|
|
GB/T 29716.2-2018 |
Mechanical vibration and shock—Signal processing—Part 2: Time domain windows for Fourier Transform analYSis |
YS
China National
Standards |
|
|
GB/T 6111-2018 |
Thermoplastics piping sYStems for the conveyance of fluids—Determination of the resistance to internal pressure |
YS
China National
Standards |
|
|
GB/T 36055-2018 |
Method for analYSis of forestry biomass—Determination of moisture content |
YS
China National
Standards |
|
|
GB/T 36056-2018 |
Method for analYSis of forestry biomass—Determination of soluble saccharides content |
YS
China National
Standards |
|
|
GB/T 36057-2018 |
Method for analYSis of forestry biomass—Determination of ash content |
YS
China National
Standards |
|
|
GB/T 36058-2018 |
Method for analYSis of forestry biomas—Determination of insoluble saccharides content |
YS
China National
Standards |
|
|
GB/T 36052-2018 |
Surface chemical analYSis—Data transfer format for scanning probe microscopy |
YS
China National
Standards |
|
|
GB/T 36053-2018 |
Evaluation of thickness, density and interface width of thin films by X-ray reflectometry—Instrumental requirements, alignment and positioning, data collection, data analYSis and reporting |
YS
China National
Standards |
|
|
GB/T 14837.3-2018 |
Rubber and rubber products—Determination of the composition of vulcanizates and uncured compounds by thermogravimetry—Part 3:Hydrocarbon rubbers，halogenated rubbers and polYSiloxane rubbers after extraction |
YS
China National
Standards |
|
|
GB/T 20501.4-2018 |
Public information guidance sYStems—Design principles and requirements for guidance elements—Part 4: Street guidance map |
YS
China National
Standards |
|
|
GB/T 36005-2018 |
Measuring methods of optical radiation safety for semiconductor lighting equipments and sYStems |
YS
China National
Standards |
|
|
GB/T 36065-2018 |
Nanotechnologies—AnalYSis of amorphous carbon, ash and volatile of carbon nanotubes—Thermogravimetry |
YS
China National
Standards |
|
|
GB/T 36066-2018 |
Cleanrooms and associated controlled environments—AnalYSis and application of test technology |
YS
China National
Standards |
|
|
GB/T 36062-2018 |
Use requirements and test methods for digital printing sYStem |
YS
China National
Standards |
|
|
GB/T 35794-2018 |
Safety design for oxygen sYStem of civil aircraft |
YS
China National
Standards |
|
|
GB/T 36116-2018 |
Requirements for the control sYStem function of the rural photovoltaic power station cluster |
YS
China National
Standards |
|
|
GB/T 36028.1-2018 |
Shore-to-ship power supply sYStem technical conditions—Part 1: High voltage connection |
YS
China National
Standards |
|
|
GB/T 36028.2-2018 |
Shore-to-ship power supply sYStem technical conditions—Part 2: Low voltage connection |
YS
China National
Standards |
|
|
GB/T 36090-2018 |
Gas analYSis—Guide for quality assurance of on line automatic measuring system |
YS
China National
Standards |
|
|
GB/T 35825-2018 |
The method of tea classification by chemical analYSis |
YS
China National
Standards |
|
|
GB/T 35809-2018 |
Method for analYSis of forestry biomass—Determination of protein content |
YS
China National
Standards |
|
|
GB/T 36071-2018 |
Non-destructive testing instruments—technical requirements of X-ray real-time imaging sYStem |
YS
China National
Standards |
|
|
GB/T 36039-2018 |
Regulatory standards for the safety of gas sYStem in gas-fired power plant |
YS
China National
Standards |
|
|
GB/T 35808-2018 |
Method for analYSis of forestry biomass—Determination of cellulase activity |
YS
China National
Standards |
|
|
GB/T 35814-2018 |
Method for analYSis of forestry biomass—Preparation of samples |
YS
China National
Standards |
|
|
GB/T 35812-2018 |
Method for analYSis of forestry biomass—Determination of insoluble solids following pretreatment |
YS
China National
Standards |
|
|
GB/T 35816-2018 |
Standard method for analYSis of forestry biomass－Determination of extractives content |
YS
China National
Standards |
|
|
GB/T 35811-2018 |
Method for analYSis of forestry biomass—Determination of starch content |
YS
China National
Standards |
|
|
GB/T 36048-2018 |
Passenger cars phYSical layer technical specification of CAN bus |
YS
China National
Standards |
|
|
GB/T 35820-2018 |
Method for analYSis of forestry biomass — Sampling methods |
YS
China National
Standards |
|
|
GB/T 35818-2018 |
Standard method for analYSis of forestry biomass－Determination of structural polysaccharides and lignin |
YS
China National
Standards |
|
|
GB/T 36081-2018 |
Nanotechnology—Characterization of CdSe quantum dot nanocrYStal—Fluorescence spectroscopy |
YS
China National
Standards |
|
|
GB/T 36050-2018 |
Rules of time synchronization for power sYStems |
YS
China National
Standards |
|
|
GB/T 36047-2018 |
Electric power information sYStem security inspection standard |
YS
China National
Standards |
|
|
GB/T 29716.4-2018 |
Mechanical vibration and shock—Signal processing—Part4：Shock-response spectrum analYSis |
YS
China National
Standards |
|
|
GB/T 36083-2018 |
Nanotechnology—Silver nanomaterials—Guidance for the characterization of biological effect-related phYSicochemical properties |
YS
China National
Standards |
|
|
GB/T 35913-2018 |
Technical requirements of solid wood flooring for ground with heating sYStem |
YS
China National
Standards |
|
|
GB/T 7247.2-2018 |
Safety of laser products—Part 2: Safety of optical fibre communication sYStems (OFCS) |
YS
China National
Standards |
|
|
GB/T 35849-2018 |
Identification sYStem for crimp-removable contacts for electrical connectors of aircraft |
YS
China National
Standards |
|
|
GB/T 35838-2018 |
Variable control sYStem for the moving lateral irrigation machines |
YS
China National
Standards |
|
|
GB/T 35850.1-2018 |
Programmable electronic sYStems in safety-related applications for lifts (elevators), escalators and moving walks—Part 1: Lifts (elevators) (PESSRAL) |
YS
China National
Standards |
|
|
GB/T 36015-2018 |
Non-destructive testing instruments—Performance and testintg rules of industrial digital X-ray imaging sYStem |
YS
China National
Standards |
|
|
GB/T 21412.6-2018 |
Petroleum and natural gas industries—Design and operation of subsea production sYStems—Part 6：Subsea production control systems |
YS
China National
Standards |
|
|
GB/T 35865-2018 |
Inspection of grain and oils—Determinination of head rice yield of paddy—Image analYSis method |
YS
China National
Standards |
|
|
GB/T 36017-2018 |
Non-destructive testing instruments—X-ray fluorescence analYSis tube |
YS
China National
Standards |
|
|
GB/T 21412.7-2018 |
Petroleum and natural gas industries—Design and operation of subsea production sYStems—Part 7：Completion/workover riser systems |
YS
China National
Standards |
|
|
GB/T 22319.9-2018 |
Measurement of quartz crYStal unit parameters—Part 9:Measurement of spurious resonances of piezoelectric crystal units |
YS
China National
Standards |
|
|
GB/T 22319.11-2018 |
Measurement of quartz crYStal unit parameters—Part 11:Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction |
YS
China National
Standards |
|
|
GB/T 4698.4-2017 |
Methods for chemical analYSis of titanium sponge, titanium and titanium alloys—Part 4：Determination of manganese content—Potassium periodate spectrophotometry and inductively coupled plasma atomic emission spectrometry |
YS
China National
Standards |
|
|
GB/T 35606-2017 |
Green product assessment—Solar water heating sYStem |
YS
China National
Standards |
|
|
GB/T 32854.2-2017 |
Automation sYStems and integration—Integration of advanced process control and optimization software for manufacturing systems—Part 2: Framework and functions |
YS
China National
Standards |
|
|
GB/T 35132.1-2017 |
Automation sYStems and integration—Evaluating energy efficiency and other factors of manufacturing systems that influence the environment—Part 1:Overview and general principles |
YS
China National
Standards |
|
|
GB/T 35116-2017 |
Integrated sYStem architecture for robot design platform |
YS
China National
Standards |
|
|
GB/T 27758.3-2017 |
Industrial automation sYStems and integration—Diagnostics, capability assessment and maintenance applications integration—Part 3: Applications integration description method |
YS
China National
Standards |
|
|
GB/T 35423-2017 |
Identification sYStem for internet of things—Ecode encoding specifications for NFC tag |
YS
China National
Standards |
|
|
GB/T 35727-2017 |
Guideline for standard voltages of medium and low voltage DC distribution sYStem |
YS
China National
Standards |
|
|
GB/T 35656-2017 |
Guideline for verification and validation of chemical analYSis method and internal quality control—Method on reporting qualitative test reports |
YS
China National
Standards |
|
|
GB/T 35691-2017 |
Guide for photovoltaic power station identification sYStem |
YS
China National
Standards |
|
|
GB/T 3836.22-2017 |
Explosive atmospheres—Part 22: Protection of equipment and transmission sYStem using optical radiation |
YS
China National
Standards |
|
|
GB/Z 35728-2017 |
Guidelines for the design of interconnected power sYStems |
YS
China National
Standards |
|
|
GB/Z 35473-2017 |
Colour design sYStem |
YS
China National
Standards |
|
|
GB/T 3293-2017 |
Chinese last sYStems |
YS
China National
Standards |
|
|
GB/T 35118-2017 |
Test methods of optical performance for Erbium-doped Yttrium Aluminum Garnet laser crYStal |
YS
China National
Standards |
|
|
GB/T 3836.18-2017 |
Explosive atmospheres—Part 18: Intrinsically safe electrical sYStems |
YS
China National
Standards |
|
|
GB/T 12668.8-2017 |
Adjustable speed electrical power drive sYStems—Part 8:Specification of voltage on the power interface |
YS
China National
Standards |
|
|
GB/T 35702.2-2017 |
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) sYStems—Part 2: Modular multilevel converters |
YS
China National
Standards |
|
|
GB/T 35702.1-2017 |
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) sYStems—Part 1: General requirements |
YS
China National
Standards |
|
|
GB/T 13663.1-2017 |
Polyethylene(PE) piping sYStems for water supply—Part 1: General |
YS
China National
Standards |
|
|
GB/T 19472.2-2017 |
Polyethylene structure-wall piping sYStems for underground usage—Part2: Polyethylene spirally enwound structure-wall pipes |
YS
China National
Standards |
|
|
GB/T 35437-2017 |
General specification for spaceborne opto-electronic tracking and imaging sYStem |
YS
China National
Standards |
|
|
GB/T 35150.1-2017 |
Technical requirements of dry process cement production complete equipment—Part 1: Raw meal preparation sYStem |
YS
China National
Standards |
|
|
GB/T 20111.4-2017 |
Electrical insulation sYStems—Procedures for thermal evaluation—Part 4: Selection of the appropriate test method for evaluation and classification of electrical insulation systems |
YS
China National
Standards |
|
|
GB/T 22578.1-2017 |
Electrical insulation sYStems (EIS)—Thermal evaluaion of combined liquid and solid components—Part 1: General requiremnts |
YS
China National
Standards |
|
|
GB/T 35309-2017 |
Practice for evaluation of granular polYSilicon by melter-zoner and spectroscopies |
YS
China National
Standards |
|
|
GB/T 23507.2-2017 |
Criterion for electrical equipment for oil drilling rig—Part 2: Control sYStem |
YS
China National
Standards |
|
|
GB/T 35306-2017 |
Test method for carbon and oxygen content of single crYStal silicon—Low temperature fourier transform infrared spectrometry |
YS
China National
Standards |
|
|
GB/T 35255-2017 |
Application layer communication protocols for the interface in intelligent public LED lighting sYStems |
YS
China National
Standards |
|
|
GB/T 35339-2017 |
Guidelines for surveillance of fusarium wilt of banana caused by Fusarium oxYSporum f.sp. cubense（Smith）& Hansen Race 4 |
YS
China National
Standards |
|
|
GB/T 35268-2017 |
Textiles—Quantitative chemical analYSis—Mixtures of polytetrafluoroethylene and certain other fibres |
YS
China National
Standards |
|
|
GB/T 35317-2017 |
Information classified security protection requirements for sYStems of IoTPS |
YS
China National
Standards |
|
|
GB/T 13822-2017 |
Test specimens for nonferrous diecasting alloYS |
YS
China National
Standards |
|
|
GB/T 35673-2017 |
Industrial communication networks—Network and sYStem security—System security requirements and security levels |
YS
China National
Standards |
|
|
GB/T 8063-2017 |
Designation of cast nonferrous metals and their alloYS |
YS
China National
Standards |
|
|
GB 12263-2017 |
Cardiopulmonary bypass sYStems—Water heating/cooling system |
YS
China National
Standards |
|
|
GB/T 35767-2017 |
Specifications for basic product of the reference stations using global navigation satellite sYStem |
YS
China National
Standards |
|
|
GB/T 35769-2017 |
Specification for service of the reference stations using global navigation satellite sYStem |
YS
China National
Standards |
|
|
GB/T 35768-2017 |
Specification for service and management sYStem of the reference stations using global navigation satellite system |
YS
China National
Standards |
|
|
GB 12260-2017 |
Cardiopulmonary bypass sYStems—Roller blood pump |
YS
China National
Standards |
|
|
GB/T 35729-2017 |
Code of practice for maintenance and test of digital electro-hydraulic control sYStem of steam turbine in fossil fuel power plant |
YS
China National
Standards |
|
|
GB/T 35597-2017 |
Glass traYS for microwave oven |
YS
China National
Standards |
|
|
GB/T 35488-2017 |
Combine harvesters monitoring sYStem |
YS
China National
Standards |
|
|
GB/T 35383-2017 |
Seeding monitoring sYStem |
YS
China National
Standards |
|
|
GB/T 26231-2017 |
Information technology—Open sYStems interconnection—National numbering system and operation code for object identifier(OID) |
YS
China National
Standards |
|
|
GB/T 29246-2017 |
Information technology—Security techniques—Information security management sYStems—Overview and vocabulary |
YS
China National
Standards |
|
|
GB/T 35420-2017 |
Identification sYStem for internet of things—Ecode encoding specifications for two-dimensional barcode |
YS
China National
Standards |
|
|
GB/T 2910.25-2017 |
Textiles—Quantitative chemical analYSis—Part 25：Mixtures of polyester and certain other fibres（method using trichloroacetic acid and chloroform） |
YS
China National
Standards |
|
|
GB/T 35419-2017 |
Identification sYStem for internet of things—Ecode encoding specifications for barcode |
YS
China National
Standards |
|
|
GB/T 35249-2017 |
Textiles—Quantitative chemical analYSis—Mixtures of polyphenylene sulfide fiber and some other fibers |
YS
China National
Standards |
|
|
GB/T 35443-2017 |
Textiles－Quantitative chemical analYSis－Mixtures of alginate fiber and certain other fibers |
YS
China National
Standards |
|
|
GB/T 22566-2017 |
Electrical insulating materials and sYStems—General method of evaluation of electrical endurance under repetivive voltage impulses |
YS
China National
Standards |
|
|
GB/T 35718.2-2017 |
Power sYStems management and associated information exchange—Interoperability in the long term—Part 2: End to end quality codes for supervisory control and data acquisition(SCADA) |
YS
China National
Standards |
|
|
GB/T 2910.26-2017 |
Textiles—Qualitative chemical analYSis—Part 26：Mixtures of melamine and cotton or aramide fibers（method using hot formic acid） |
YS
China National
Standards |
|
|
GB/T 35257-2017 |
Textiles—Quantitative chemical analYSis—Mixtures of chitosan and certain other fibers(method using acetic acid) |
YS
China National
Standards |
|
|
GB/T 35707-2017 |
Guide for hydropower plant identification sYStem |
YS
China National
Standards |
|
|
GB/T 35377-2017 |
Indicators sYStem for long-term observation of forest ecosystem |
YS
China National
Standards |
|
|
GB/T 3043-2017 |
Conventional abrasive—Chemical analYSis of brown fused aluminium oxide |
YS
China National
Standards |
|
|
GB/T 35719-2017 |
General requirements for marine medium voltage DC power sYStem |
YS
China National
Standards |
|
|
GB/T 35715-2017 |
Calculation methods for short-circuit current of DC electrical sYStem on ship |
YS
China National
Standards |
|
|
GB/T 35696-2017 |
Requirements for marine medium voltage AC diesel generator set and control sYStem |
YS
China National
Standards |
|
|
GB/T 35700.2-2017 |
Requirements for ships shaft generator sYStem—Part 2: Generator system |
YS
China National
Standards |
|
|
GB/T 35705-2017 |
Acoustic positioning sYStem |
YS
China National
Standards |
|
|
GB/T 35699-2017 |
Specification for power station control sYStem of ship |
YS
China National
Standards |
|
|
GB/T 35713-2017 |
Ships heading control sYStems |
YS
China National
Standards |
|
|
GB/T 35625-2017 |
Societal security—Business continuity management sYStems—Guidelines for business impact analysis(BIA) |
YS
China National
Standards |
|
|
GB/T 9258.3-2017 |
Coated abrasives—Grain size analYSis—Part 3: Determination of grain size distribution of microgrits P240 to P2500 |
YS
China National
Standards |
|
|
GB/T 3045-2017 |
Conventional abrasive—Chemical analYSis of silicon carbide |
YS
China National
Standards |
|
|
GB/T 35130-2017 |
RFID sYStem used in food manufacturing—RF tag information and coding specification |
YS
China National
Standards |
|
|
GB/T 34840.2-2017 |
Information and documentation—Principles and functional requirements for records in electronic office environments—Part 2:Guidelines and functional requirements for digital records management sYStems |
YS
China National
Standards |
|
|
GB/T 35319-2017 |
Internet of things—SYStem interface requirements |
YS
China National
Standards |
|
|
GB/T 35284-2017 |
Information security technology - Requirements and assessment methods for website identity and sYStem security |
YS
China National
Standards |
|
|
GB/T 35305-2017 |
MonocrYStalline gallium arsenide polished wafers for solar cell |
YS
China National
Standards |
|
|
GB/T 35307-2017 |
Granular polYSilicon produced by fluidized bed method |
YS
China National
Standards |
|
|
GB/T 35725-2017 |
General requirements for automatic testing sYStem of power quality monitoring equipment |
YS
China National
Standards |
|
|
GB/T 35734-2017 |
Portable tube-excited X-ray fluorescence analYSis equipment－Classification, safety requirements and test |
YS
China National
Standards |
|
|
GB/T 35501-2017 |
MethyltrimethoxYSilane for industrial use |
YS
China National
Standards |
|
|
GB/T 35449-2017 |
Automatic quantitative loading vehicle sYStem |
YS
China National
Standards |
|
|
GB/T 35703-2017 |
Specification of sYStem design for high-voltage direct current (HVDC) transmission using voltage sourced converters (VSC) |
YS
China National
Standards |
|
|
GB/T 15544.4-2017 |
Short-circuit current calculation in three-phase a.c.sYStems—Part 4: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth |
YS
China National
Standards |
|
|
GB/T 15544.2-2017 |
Short-circuit current calculation in three-phase a.c. sYStems—Part 2: Factors for the calculation of short-circuit currents |
YS
China National
Standards |
|
|
GB/T 35290-2017 |
Information security technology - General requirement of security for radio frequency identification sYStems |
YS
China National
Standards |
|
|
GB/T 35487-2017 |
Variable fertilizing and seeding machine control sYStem |
YS
China National
Standards |
|
|
GB/T 35654-2017 |
Evaluation index sYStem for city public transportation development performance |
YS
China National
Standards |
|
|
GB/T 35299-2017 |
Information technology—Open sYStems interconnection—Object identifier resolution system |
YS
China National
Standards |
|
Cart:
+86-755-25831330
