GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 10067.42-2013 |
Basic specifications for electroheat installations - Part 42: Pusher resistance heating unit 电热装置基本技术条件 第42部分:推送式电阻加热机组 |
China National Standards for |
English PDF |
GB/T 10067.41-2013 |
Basic specifications for electroheat installations - Part 41: Mesh belt resistance heating unit 电热装置基本技术条件 第41部分:网带式电阻加热机组 |
China National Standards for |
English PDF |
GB/T 10067.32-2013 |
Basic specifications for electroheat installations - Part 32: A set of medium frequency coreless induction furnaces with a voltage type frequency converter 电热装置基本技术条件 第32部分:电压型变频多台中频无心感应炉成套装置 |
China National Standards for |
English PDF |
GB/T 10067.31-2013 |
Basic specifications for electroheat installations - Part 31: Medium frequency coreless induction furnace 电热装置基本技术条件 第31部分:中频无心感应炉 |
China National Standards for |
English PDF |
GB 14711-2013 |
General requirements for safety of small and medium size rotating electrical machines 中小型旋转电机通用安全要求 |
China National Standards for |
English PDF |
GB/T 9576-2013 |
Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 |
China National Standards for |
English PDF |
GB/T 8923.4-2013 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions 、preparation grades and flash rust grades in connection with high-pressure water jetting 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第4部分:与高压水喷射处理有关的初始表面状态、处理等级和闪锈等级 |
China National Standards for |
English PDF |
GB/T 29605-2013 |
Sensory analysis - Guide for food sensory quality control 感官分析 食品感官质量控制导则 |
China National Standards for |
English PDF |
GB/T 29593-2013 |
Kraft paper adhesive tape for surface protection 表面保护用牛皮纸胶粘带 |
China National Standards for |
English PDF |
GB/T 29592-2013 |
Determination of the emission of volatile organic compounds and aldehydes of adhesives for building products 建筑胶粘剂挥发性有机化合物(VOC)及醛类化合物释放量的测定方法 |
China National Standards for |
English PDF |
GB/T 2794-2013 |
Determination for viscosity of adhesives - Single cylinder rotational viscometer method 胶粘剂粘度的测定 单圆筒旋转粘度计法 |
China National Standards for |
English PDF |
GB/T 16591-2013 |
Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification 输送无水氨用橡胶软管及软管组合件 规范 |
China National Standards for |
English PDF |
GB/T 13288.4-2013 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法 |
China National Standards for |
English PDF |
GB/T 10546-2013 |
Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa - Specification 在 2.5MPa及以下压力下输送液态或气态液化石油气(LPG)和天然气的橡胶软管及软管组合件 规范 |
China National Standards for |
English PDF |
GB/T 29625-2013 |
Public information graphical symbols for use on sign - Animal symbols 标志用公共信息图形符号 动物符号 |
China National Standards for |
English PDF |
GB/T 29624-2013 |
Layout key of consignment for the international trade 国际贸易托运单样式 |
China National Standards for |
English PDF |
GB/T 29622-2013 |
E-commerce credit - The specifications for disclosing seller’s credit information of transaction 电子商务信用 卖方交易信用信息披露规范 |
China National Standards for |
English PDF |
GB/T 2893.1-2013 |
Graphical symbols - Safety colours and safety signs - Part 1: Design principles for safety signs and safety markings 图形符号 安全色和安全标志 第1部分:安全标志和安全标记的设计原则 |
China National Standards for |
English PDF |
GB/T 20501.6-2013 |
Public information guidance systems - Design principles and requirements for guidance elements - Part 6: Direction sign 公共信息导向系统 导向要素的设计原则与要求 第6部分:导向标志 |
China National Standards for |
English PDF |
GB/T 20501.2-2013 |
Public information guidance systems - Design principles and requirements for guidance elements - Part 2: Location sign 公共信息导向系统 导向要素的设计原则与要求 第2部分:位置标志 |
China National Standards for |
English PDF |
GB/T 20501.1-2013 |
Public information guidance systems - Design principles and requirements for guidance elements - Part 1: General 公共信息导向系统 导向要素的设计原则与要求 第1部分:总则 |
China National Standards for |
English PDF |
GB/T 16903.3-2013 |
Rules for the presentation of graphical symbols for use on graphical signs - Part 3: Method for testing perceptibility 标志用图形符号表示规则 第3部分:感知性测试方法 |
China National Standards for |
English PDF |
GB/T 16903.2-2013 |
Rules for the presentation of graphical symbols for use on graphical signs - Part 2: Methods for testing comprehensibility 标志用图形符号表示规则 第2部分:理解度测试方法 |
China National Standards for |
English PDF |
GB/T 16902.3-2013 |
Rules for the presentation of graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols 设备用图形符号表示规则 第3部分:应用导则 |
China National Standards for |
English PDF |
GB/T 16472-2013 |
Codes for passengers,types of cargo,packages and packaging materials 乘客及货物类型、包装类型和包装材料类型代码 |
China National Standards for |
English PDF |
GB/T 29637-2013 |
GC and GC-MS examination methods for ketamine in suspected drug 疑似毒品中氯胺酮的气相色谱、气相色谱-质谱检验方法 |
China National Standards for |
English PDF |
GB/T 29636-2013 |
GC ,HPLC and GC-MS examination methods for methylamphetamine in suspected drug 疑似毒品中甲基苯丙胺的气相色谱、高效液相色谱和气相色谱-质谱检验方法 |
China National Standards for |
English PDF |
GB/T 29635-2013 |
GC and GC-MS examination methods for heroin in suspected drug 疑似毒品中海洛因的气相色谱、气相色谱-质谱检验方法 |
China National Standards for |
English PDF |
GB/T 29634-2013 |
General specification for permanent magnetic DC gearmotor using on electric wheelchairs 电动轮椅车用永磁直流齿轮减速电动机构通用技术条件 |
China National Standards for |
English PDF |
GB/T 29639-2013 |
Guidelines for enterprises to develop emergency response plan for work place accidents 生产经营单位生产安全事故应急预案编制导则 |
China National Standards for |
English PDF |
GB/T 18287-2013 |
General specification of lithium-ion cells and batteries for mobile phone 移动电话用锂离子蓄电池及蓄电池组总规范 |
China National Standards for |
English PDF |
GB/T 50903-2013 |
Code for construction organization plan of municipal engineering 市政工程施工组织设计规范 |
China National Standards for |
English PDF |
GB/T 50899-2013 |
Standard for basic terminology of real estate appraisal 房地产估价基本术语标准 |
China National Standards for |
English PDF |
GB 50339-2013 |
Code for acceptance of quality of intelligent building systems 智能建筑工程质量验收规范 |
China National Standards for |
English PDF |
GB/T 5678-2013 |
Sampling methods of spectrochemical analysis for cast alloys 铸造合金光谱分析取样方法 |
China National Standards for |
English PDF |
GB/T 29536-2013 |
Testing method for the forming limit diagram (FLD) of metal tube 金属管材成形极限图(FLD) 试验方法 |
China National Standards for |
English PDF |
GB/T 29535-2013 |
Technological design principle for combined warm-cold forging process 温锻冷锻联合成形工艺 工艺编制原则 |
China National Standards for |
English PDF |
GB/T 29534-2013 |
General specifications of combined warm-cold forging parts 温锻冷锻联合成形锻件 通用技术条件 |
China National Standards for |
English PDF |
GB/T 29533-2013 |
Compiling method of technological norm for steel die forging material consumption 钢质模锻件材料消耗工艺定额编制方法 |
China National Standards for |
English PDF |
GB/T 29532-2013 |
General specification for steel precision hot die forgings 钢质精密热模锻件 通用技术条件 |
China National Standards for |
English PDF |
GB/T 29528-2013 |
Specification of copper alloy forgings for valves 阀门用铜合金锻件技术条件 |
China National Standards for |
English PDF |
GB/T 29527-2013 |
Graphical symbols for common used equipments of powder processing 通用粉体加工设备图形标记 |
China National Standards for |
English PDF |
GB/T 1414-2013 |
General purpose metric screw threads - The plan for pipe systems 普通螺纹 管路系列 |
China National Standards for |
English PDF |
GB/T 13916-2013 |
Unnoted tolerance of shape and position for stamping parts 冲压件形状和位置未注公差 |
China National Standards for |
English PDF |
GB/T 13915-2013 |
Tolerance of angles for stamping parts 冲压件角度公差 |
China National Standards for |
English PDF |
GB/T 13914-2013 |
Tolerance of dimensions for stamping parts 冲压件尺寸公差 |
China National Standards for |
English PDF |
GB/T 29524-2013 |
Safety specification for Acid-making with Smelting Gas 冶炼烟气制酸安全生产规范 |
China National Standards for |
English PDF |
GB/T 29523-2013 |
Safety specification for zinc smelting(hydrometallurgy) 锌冶炼安全生产规范(湿法) |
China National Standards for |
English PDF |
GB/T 29522-2013 |
Safety specification for zinc smelting (pyrometallurgy) 锌冶炼安全生产规范(火法) |
China National Standards for |
English PDF |
GB/T 29521-2013 |
Safety specification for underground mining of tungsten mine 钨矿山地下开采安全生产规范 |
China National Standards for |
English PDF |
GB/T 29520-2013 |
Safety specification for copper smelting enterprise 铜冶炼安全生产规范 |
China National Standards for |
English PDF |
GB/T 29519-2013 |
Safety specification for lead smelting 铅冶炼安全生产规范 |
China National Standards for |
English PDF |
GB/T 29549.3-2013 |
Specification for offshore modular drillling rigs on fixed platforms - Part 3:Hook-up,commissioning,and acceptance 海上石油固定平台模块钻机 第3部分:海上安装、调试与验收 |
China National Standards for |
English PDF |
GB/T 29549.2-2013 |
Specifications for offshore modular drilling rigs on fixed platforms - Part 2:Construction 海上石油固定平台模块钻机 第2部分:建造 |
China National Standards for |
English PDF |
GB/T 29549.1-2013 |
Specifications for offshore modular drilling rigs on fixed platforms - Part 1:Design 海上石油固定平台模块钻机 第1部分:设计 |
China National Standards for |
English PDF |
GB/T 29546-2013 |
Methods of static load deflection measurement for straight-side presses 闭式压力机静载变形测量方法 |
China National Standards for |
English PDF |
GB/T 29544-2013 |
Safety requirements for off-gird type wind-solar photovoltaic hybrid electricity generating system 离网型风光互补发电系统 安全要求 |
China National Standards for |
English PDF |
GB/T 29543-2013 |
Wind turbine generator systems for cold environments 低温型风力发电机组 |
China National Standards for |
English PDF |
GB/T 29590-2013 |
Criteria for field management in enterprise 企业现场管理准则 |
China National Standards for |
English PDF |
GB 29541-2013 |
The minimum allowable values of the energy efficiency and energy efficiency grades for heat pump water heaters 热泵热水机(器)能效限定值及能效等级 |
China National Standards for |
English PDF |
GB 29540-2013 |
Minimm allowable values of the energy efficiency and energy efficiency grades for lithium bromide absorption chillers 溴化锂吸收式冷水机组能效限定值及能效等级 |
China National Standards for |
English PDF |
GB 29539-2013 |
The minimum allowable values of energy efficiency and energy efficiency grades for range hoods 吸油烟机能效限定值及能效等级 |
China National Standards for |
English PDF |
GB 24850-2013 |
Minimum allowable values of energy efficiency and energy efficiency grades for flat panel televisions 平板电视能效限定值及能效等级 |
China National Standards for |
English PDF |
GB 21455-2013 |
The minimum allowable values of the energy efficiency and energy efficiency grades for variable speed room air conditioners 转速可控型房间空气调节器能效限定值及能效等级 |
China National Standards for |
English PDF |
GB 20052-2013 |
Minimum allowable values of energy efficiency and energy efficiency grades for three-phase distribution transformers 三相配电变压器能效限定值及能效等级 |
China National Standards for |
English PDF |
GB 19044-2013 |
Minimum allowable values of energy efficiency and the energy efficiency grades of self-ballasted fluorescent lamps for general lighting service 普通照明用自镇流荧光灯能效限定值及能效等级 |
China National Standards for |
English PDF |
GB 19043-2013 |
Minimum allowable values of energy efficiency and the energy efficiency grades of double-capped fluorescent lamps for general lighting service 普通照明用双端荧光灯能效限定值及能效等级 |
China National Standards for |
English PDF |
GB 12021.4-2013 |
The maximum allowable values of the energy,water consumption and grades for household electric washing machines 电动洗衣机能效水效限定值及等级 |
China National Standards for |
English PDF |
GB 50898-2013 |
Technical code for water mist fire extinguishing system 细水雾灭火系统技术规范 |
China National Standards for |
English PDF |
GB 50894-2013 |
Code for design of environment protection for machinery industry 机械工业环境保护设计规范 |
China National Standards for |
English PDF |
GB 50891-2013 |
Code for automation design of non-ferrous metals smelters 有色金属冶炼厂自控设计规范 |
China National Standards for |
English PDF |
GB 50884-2013 |
Code for design of steel silo structures 钢筒仓技术规范 |
China National Standards for |
English PDF |
GB 50883-2013 |
Code for quality acceptance of light-metal smelting mechanical equipment installation engineering 轻金属冶炼机械设备安装工程质量验收规范 |
China National Standards for |
English PDF |
GB 50882-2013 |
Code for construction specification of light-metal smelting mechanical equipment installation engineering 轻金属冶炼机械设备安装工程施工规范 |
China National Standards for |
English PDF |
GB 50863-2013 |
Code for design of tailings facilities 尾矿设施设计规范 |
China National Standards for |
English PDF |
GB 14881-2013 |
National Food Safety Standard General Hygienic Regulation for Food Production 食品安全国家标准 食品生产通用卫生规范 |
China National Standards for |
English PDF |
GB 50870-2013 |
Unified code for technique for constructional safety 建筑施工安全技术统一规范 |
China National Standards for |
English PDF |
GB/T 4325.9-2013 |
Methods for chemical analysis of molybdenum - Part 9: Determination of nickel content - Dimethylglyoxime spectrophotometry and flame atomic absorption spectrometry 钼化学分析方法 第9部分:镍量的测定 丁二酮肟分光光度法和火焰原子吸收光谱法 |
China National Standards for |
English PDF |
GB/T 4325.8-2013 |
Methods for chemical analysis of molybdenum - Part 8: Determination of cobalt content - 5-Cl-PADAB spectrophotometry and flame atomic absorption spectrometry 钼化学分析方法 第8部分:钴量的测定 钴试剂分光光度法和火焰原子吸收光谱法 |
China National Standards for |
English PDF |
GB/T 4325.7-2013 |
Methods for chemical analysis of molybdenum - Part 7: Determination of iron content - 1,10-phenanthroline spectrophotometry and inductively coupled plasma atomic emission spectrometry 钼化学分析方法 第7部分:铁量的测定 邻二氮杂菲分光光度法和电感耦合等离子体发射光谱法 |
China National Standards for |
English PDF |
GB/T 4325.6-2013 |
Methods for chemical analysis of molybdenum - Part 6: Determination of arsenic content - Atomic fluorescence spectrometry 钼化学分析方法 第6部分:砷量的测定 原子荧光光谱法 |
China National Standards for |
English PDF |
GB/T 4325.5-2013 |
Methods for chemical analysis of molybdenum - Part 5: Determination of antimony content - Atomic fluorescence spectrometry 钼化学分析方法 第5部分:锑量的测定 原子荧光光谱法 |
China National Standards for |
English PDF |
GB/T 4325.4-2013 |
Methods for chemical analysis of molybdenum - Part 4: Determination of tin content - Atomic fluorescence spectrometry 钼化学分析方法 第4部分:锡量的测定 原子荧光光谱法 |
China National Standards for |
English PDF |
GB/T 4325.3-2013 |
Methods for chemical analysis of molybdenum - Part 3: Determination of bismuth content - Atomic fluorescence spectrometry 钼化学分析方法 第3部分:铋量的测定 原子荧光光谱法 |
China National Standards for |
English PDF |
GB/T 4325.26-2013 |
Methods for chemical analysis of molybdenum - Part 26: Determination of aluminium,magnesium,calcium,vanadium,chromium,manganese,iron,cobalt,nickel,copper,zinc,arsenic,cadmium ,tin,antimony,tungsten,lead and bismuth contents 钼化学分析方法 第26部分:铝、镁、钙、钒、铬、锰、铁、钴、镍、铜、锌、砷、镉、锡、锑、钨、铅和铋量的测定 电感耦合等离子体质谱法 |
China National Standards for |
English PDF |
GB/T 4325.25-2013 |
Methods for chemical analysis of molybdenum - Part 25: Determination of hydrogen content - Intert gas fusion infrared absorption method/thermal conductivity method 钼化学分析方法 第25部分:氢量的测定 惰气熔融红外吸收法/热导法 |
China National Standards for |
English PDF |
GB/T 4325.24-2013 |
Methods for chemical analysis of molybdenum - Part 24: Determination of tungsten content - Inductively coupled plasma atomic emission spectrometry 钼化学分析方法 第24部分:钨量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards for |
English PDF |
GB/T 4325.23-2013 |
Methods for chemical analysis of molybdenum - Part 23: Determination of oxygen and nitrogen contents - Inert gas fusion-infrared absorption and thermal conductivity method 钼化学分析方法 第23部分:氧量和氮量的测定 惰气熔融红外吸收法-热导法 |
China National Standards for |
English PDF |
GB/T 4325.22-2013 |
Methods for chemical analysis of molybdenum - Part 22:Determination of phosphorus content - Molybdenum blue spectrophotometry 钼化学分析方法 第22部分:磷量的测定 钼蓝分光光度法 |
China National Standards for |
English PDF |
GB/T 4325.2-2013 |
Methods for chemical analysis of molybdenum - Part 2: Determination of cadmium content - Flame atomic absorption spectrometry 钼化学分析方法 第2部分:镉量的测定 火焰原子吸收光谱法 |
China National Standards for |
English PDF |
GB/T 4325.21-2013 |
Methods for chemical analysis of molybdenum - Part 21: Determination of carbon content and sulfur content - High frequency combustion-infrared absorption method 钼化学分析方法 第21部分:碳量和硫量的测定 高频燃烧红外吸收法 |
China National Standards for |
English PDF |
GB/T 4325.20-2013 |
Methods for chemical analysis of molybdenum - Part 20: Determination of manganese content - Flame atomic absorption spectrometry 钼化学分析方法 第20部分:锰量的测定 火焰原子吸收光谱法 |
China National Standards for |
English PDF |
GB/T 4325.19-2013 |
Methods for chemical analysis of molybdenum - Part 19: Determination of chromium content - Diphenylcarbazide spectrophotometry 钼化学分析方法 第19部分:铬量的测定 二苯基碳酰二肼分光光度法 |
China National Standards for |
English PDF |
GB/T 4325.18-2013 |
Methods for chemical analysis of molybdenum - Part 18: Determination of vanadium content - N-benzoyl-N-phenylhydroxylamine spectrophotometry and inductively coupled plasma atomic emission spectrometry 钼化学分析方法 第18部分:钒量的测定 钽试剂分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards for |
English PDF |
GB/T 4325.17-2013 |
Methods for chemical analysis of molybdenum - Part 17: Determination of titanium content - Diantipyrylmethane spectrophotometry and inductively coupled plasma atomic emission spectrometry 钼化学分析方法 第17部分:钛量的测定 二安替比林甲烷分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards for |
English PDF |
GB/T 4325.16-2013 |
Methods for chemical analysis of molybdenum - Part 16: Determination of potassium content - Flame atomic absorption spectrometry 钼化学分析方法 第16部分:钾量的测定 火焰原子吸收光谱法 |
China National Standards for |
English PDF |
GB/T 4325.15-2013 |
Methods for chemical analysis of molybdenum - Part 15: Determination of sodium content - Flame atomic absorption spectrometry 钼化学分析方法 第15部分:钠量的测定 火焰原子吸收光谱法 |
China National Standards for |
English PDF |
GB/T 4325.14-2013 |
Methods for chemical analysis of molybdenum - Part 14: Determination of magnesium content - Flame atomic absorption spectrometry 钼化学分析方法 第14部分:镁量的测定 火焰原子吸收光谱法 |
China National Standards for |
English PDF |
GB/T 4325.13-2013 |
Methods for chemical analysis of molybdenum - Part 13: Determination of calcium content - Flame atomic absorption spectrometry 钼化学分析方法 第13部分:钙量的测定 火焰原子吸收光谱法 |
China National Standards for |
English PDF |
GB/T 4325.12-2013 |
Methods for chemical analysis of molybdenum - Part 12: Determination of silicon content - Inductively coupled plasma atomic emission spectrometry 钼化学分析方法 第12部分:硅量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards for |
English PDF |
Find out:29876Items | To Page of: First -Previous-Next -Last | [144] [145] [146] [147] [148] [149] [150] |