GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 3098.24-2020 |
Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications 紧固件机械性能 高温用不锈钢和镍合金螺栓、螺钉、螺柱和螺母 |
China National Standards for |
English PDF |
GB/T 1.2-2020 |
Directives for standardization—Part 2:Drafting rules of standardizing documents based on ISO/IEC standardizing documents 标准化工作导则 第2部分:以ISO/IEC标准化文件为基础的标准化文件起草规则 |
China National Standards for |
English PDF |
GB/T 39426-2020 |
General technical specification for permanent magnetic direct drive motor vehicles of urban rail transit 城市轨道交通永磁直驱车辆通用技术条件 |
China National Standards for |
English PDF |
GB/T 39425-2020 |
General technical specfication for the permanent magnetic direct drive motor bogie of urban rail transit 城市轨道交通车辆永磁直驱转向架通用技术条件 |
China National Standards for |
English PDF |
GB/T 39424.2-2020 |
Road vehicles—Traffic accident analysis—Part 2: Guidelines for the use of impact severity measures 道路车辆 交通事故分析 第2部分:碰撞严重度测量方法使用指南 |
China National Standards for |
English PDF |
GB/T 39423-2020 |
Road vehicles—Collection of accident data for evaluation of occupant restraint performance 道路车辆 评价乘员约束性能的事故数据收集 |
China National Standards for |
English PDF |
GB/T 39422-2020 |
Determination methods of characteristic values for dowel-bearing strength and withdrawal capacity of nails and screws in timber structure 木结构销槽承压强度及钉连接承载力特征值确定方法 |
China National Standards for |
English PDF |
GB/T 39421-2020 |
Methods for determining the static gel strength of cement formulations 水泥浆静胶凝强度测定方法 |
China National Standards for |
English PDF |
GB/T 39416-2020 |
Test methods of fuel consumption for truck crane 汽车起重机燃油消耗量试验方法 |
China National Standards for |
English PDF |
GB/T 39414.4-2020 |
Interface specification for signal in space of BeiDou navigation satellite system—Part 4: Open service signal B3I 北斗卫星导航系统空间信号接口规范 第4部分:公开服务信号B3I |
China National Standards for |
English PDF |
GB/T 39414.3-2020 |
Interface specification for signal in space of BeiDou navigation satellite system—Part 3: Open service signal B1I 北斗卫星导航系统空间信号接口规范 第3部分:公开服务信号B1I |
China National Standards for |
English PDF |
GB/T 39414.2-2020 |
Interface specification for signal in space of BeiDou navigation satellite system—Part 2: Open service signal B2a 北斗卫星导航系统空间信号接口规范 第2部分:公开服务信号B2a |
China National Standards for |
English PDF |
GB/T 39414.1-2020 |
Interface specification for signal in space of Beidou navigation satellite system—Part 1: Open service signal B1C 北斗卫星导航系统空间信号接口规范 第1部分:公开服务信号B1C |
China National Standards for |
English PDF |
GB/T 39413-2020 |
Performance requirements and test methods for BeiDou navigation satellite system signal simulator 北斗卫星导航系统信号模拟器性能要求及测试方法 |
China National Standards for |
English PDF |
GB/T 39412-2020 |
Information security technology—Audit specification of code security 信息安全技术 代码安全审计规范 |
China National Standards for |
English PDF |
GB/T 39410-2020 |
General specification for GNSS geodetic receivers onboard low earth orbit satellite 低轨星载GNSS测量型接收机通用规范 |
China National Standards for |
English PDF |
GB/T 39406-2020 |
Specification of XML exchange of PLC-based software development platform for industrial robots 工业机器人可编程控制器软件开发平台程序的XML交互规范 |
China National Standards for |
English PDF |
GB/T 39404-2020 |
Information security general requirement for control unit of industrial robot 工业机器人控制单元的信息安全通用要求 |
China National Standards for |
English PDF |
GB/T 39403-2020 |
Security protection management requirements of cloud manufacturing service platform 云制造服务平台安全防护管理要求 |
China National Standards for |
English PDF |
GB/T 39401-2020 |
The data exchange of cloud service platform for industrial robot 工业机器人云服务平台数据交换 |
China National Standards for |
English PDF |
GB/T 39399-2020 |
General specification for BeiDou navigation satellite system geodetic receiver 北斗卫星导航系统测量型接收机通用规范 |
China National Standards for |
English PDF |
GB/T 39397.2-2020 |
File format of international GNSS monitoring and assessment system (iGMAS)—Part 2: Products 全球连续监测评估系统(iGMAS)文件格式 第2部分:产品 |
China National Standards for |
English PDF |
GB/T 39397.1-2020 |
File format of international GNSS monitoring and assessment system (iGMAS)—Part 1: Observation data 全球连续监测评估系统(iGMAS)文件格式 第1部分:观测数据 |
China National Standards for |
English PDF |
GB/T 39396.2-2020 |
Quality requirements for international GNSS monitoring and assessment system (iGMAS)—Part 2: Products 全球连续监测评估系统(iGMAS)质量要求 第2部分:产品 |
China National Standards for |
English PDF |
GB/T 39396.1-2020 |
Quality requirements for international GNSS monitoring and assessment system (iGMAS)—Part 1: Observation data 全球连续监测评估系统(iGMAS)质量要求 第1部分:观测数据 |
China National Standards for |
English PDF |
GB/T 39395-2020 |
Test method for buckling resistance of the thermoplastics inspection chamber bases 热塑性塑料检查井井座抗压失稳试验方法 |
China National Standards for |
English PDF |
GB/T 39394-2020 |
Test method for LED lamps, LED luminaires and LED modules LED灯、LED灯具和LED模块的测试方法 |
China National Standards for |
English PDF |
GB/T 39393-2020 |
Technical specification of intelligent controller unit for household appliances 家用电器专用智能控制单元技术规范 |
China National Standards for |
English PDF |
GB/T 39392-2020 |
Technical specification of intelligent power module for household appliances 家用电器专用智能功率模块技术规范 |
China National Standards for |
English PDF |
GB/T 39473-2020 |
Specifications for open service performance of BeiDou navigation satellite system 北斗卫星导航系统公开服务性能规范 |
China National Standards for |
English PDF |
GB/T 39472-2020 |
Performance requirements and test methods for BeiDou navigation satellite system signal record and playback devices 北斗卫星导航系统信号采集回放仪性能要求及测试方法 |
China National Standards for |
English PDF |
GB/T 39357-2020 |
Specification for construction of cultivation base of white jelly fungus 银耳栽培基地建设规范 |
China National Standards for |
English PDF |
GB/T 39259-2020 |
Green manufacturing—Green supply chain management in manufacturing enterprises—Requirements for bill of material 绿色制造 制造企业绿色供应链管理 物料清单要求 |
China National Standards for |
English PDF |
GB/T 39257-2020 |
Green manufacturing—Green supply chain management in manufacturing enterprises—Specifications for assessment 绿色制造 制造企业绿色供应链管理 评价规范 |
China National Standards for |
English PDF |
GB/T 39256-2020 |
Green manufacturing—Green supply chain management in manufacturing enterprises—Specifications of informatization management platform 绿色制造 制造企业绿色供应链管理 信息化管理平台规范 |
China National Standards for |
English PDF |
GB/T 35381.14-2020 |
Tractors and machinery for agriculture and forestry—Serial control and communications data network—Part 14:Sequence control 农林拖拉机和机械 串行控制和通信数据网络 第14部分:顺序控制 |
China National Standards for |
English PDF |
GB/T 35381.12-2020 |
Tractors and machinery for agriculture and forestry—Serial control and communications data network—Part 12:Diagnostics services 农林拖拉机和机械 串行控制和通信数据网络 第12部分:诊断服务 |
China National Standards for |
English PDF |
GB/T 29790-2020 |
Point-of-care testing(POCT)—Requirements for quality and competence 即时检验 质量和能力的要求 |
China National Standards for |
English PDF |
GB/T 19703-2020 |
In vitro diagnostic medical devices—Measurement of quantities in samples of biological origin—Requirements for certified reference materials and the content of supporting documentation 体外诊断医疗器械 生物源性样品中量的测量 有证参考物质及支持文件内容的要求 |
China National Standards for |
English PDF |
GB/T 39494-2020 |
Determination for coating adhesion of rare earth permanent magnetic materials for drive motor of new energy vehicle 新能源汽车驱动电机用稀土永磁材料表面涂镀层结合力的测定 |
China National Standards for |
English PDF |
GB/T 39493-2020 |
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Pressure regulators 燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 压力调节装置 |
China National Standards for |
English PDF |
GB/T 39492-2020 |
Testing method of quantum efficiency for white LED phosphor 白光LED用荧光粉量子效率测试方法 |
China National Standards for |
English PDF |
GB/T 39491-2020 |
General technical requirements of carbon fiber composites covering parts for automobiles 汽车用碳纤维复合材料覆盖部件通用技术要求 |
China National Standards for |
English PDF |
GB/T 39490-2020 |
Test method for liquid impingement erosion resistance of fiber-reinforced plastics—Rotating apparatus method 纤维增强塑料液体冲击抗侵蚀性试验方法 旋转装置法 |
China National Standards for |
English PDF |
GB/T 39489-2020 |
Technical specification for the total tailings paste backfill 全尾砂膏体充填技术规范 |
China National Standards for |
English PDF |
GB/T 39488-2020 |
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Electronic type gas and air ratio control system 燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 电子式燃气与空气比例控制系统 |
China National Standards for |
English PDF |
GB/T 39487-2020 |
Test method of tube shear strength for structural foaming adhesives 发泡结构胶粘剂管剪强度试验方法 |
China National Standards for |
English PDF |
GB/T 39486-2020 |
Chemical reagent—General rules for inductively coupled plasma mass spectrometry 化学试剂 电感耦合等离子体质谱分析方法通则 |
China National Standards for |
English PDF |
GB/T 39485-2020 |
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Manual gas valves 燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 手动燃气阀 |
China National Standards for |
English PDF |
GB/T 39484-2020 |
Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料 用校准端载荷分裂试验(C-ELS)和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 |
China National Standards for |
English PDF |
GB/T 39327-2020 |
Rubber and plastics hoses for marine-engine wet-exhaust systems—Specification 船用发动机湿式排气系统用橡胶和塑料软管 规范 |
China National Standards for |
English PDF |
GB/T 39313-2020 |
Rubber hoses and hose assemblies—Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids—Specification 橡胶软管及软管组合件 输送石油基或水基流体用致密钢丝编织增强液压型 规范 |
China National Standards for |
English PDF |
GB/T 39311-2020 |
Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification 热塑性软管和软管组合件 液压用钢丝或合成纱线增强单一压力型 规范 |
China National Standards for |
English PDF |
GB/T 39309-2020 |
Rubber hoses and hose assemblies—Wire- or textile-reinforced single-pressure types for hydraulic applications—Specification 橡胶软管和软管组合件 液压用钢丝或织物增强单一压力型 规范 |
China National Standards for |
English PDF |
GB/T 39308-2020 |
Technical specification for refractory organic wastewater advanced treatment 难降解有机废水深度处理技术规范 |
China National Standards for |
English PDF |
GB/T 39304-2020 |
General technical specification for sample pre-treatment of biological toxicity detection in reclaimed water 再生水生物毒性检测的样品前处理通用技术规范 |
China National Standards for |
English PDF |
GB/T 39303-2020 |
General technical specification for pre-treatment of microorganism samples in wastewater treatment system 废水处理系统微生物样品前处理通用技术规范 |
China National Standards for |
English PDF |
GB/T 39301-2020 |
Disposal method for electroplating sludge reduction 电镀污泥减量化处置方法 |
China National Standards for |
English PDF |
GB/T 39300-2020 |
Treatment and disposal method for chromium-containing electroplating sludge 含铬电镀污泥处理处置方法 |
China National Standards for |
English PDF |
GB/T 39299-2020 |
Methods for disposing reused thinner waste in the production of TFT-LCD 液晶面板制造稀释废液回收再利用方法 |
China National Standards for |
English PDF |
GB/T 39295-2020 |
Determination of the tack for water based adhesive 水性胶粘剂触粘性的测定 |
China National Standards for |
English PDF |
GB/T 39294-2020 |
Determination of the discoloration performence for adhesive 胶粘剂变色(黄变)性能的测定 |
China National Standards for |
English PDF |
GB/T 39293-2020 |
Terminology and classification for industry cleaning 工业清洗术语和分类 |
China National Standards for |
English PDF |
GB/T 39292-2020 |
Method of sampling and sample preparation for analysis of palladium carbon wastes 废钯炭分析用取样和制样方法 |
China National Standards for |
English PDF |
GB/T 39291-2020 |
Test method for impact wear properties of studs 鞋钉冲击磨损性能试验方法 |
China National Standards for |
English PDF |
GB/T 39285-2020 |
Method for chemical analysis of palladium compounds—Determination of chlorine content—Ion chromatography 钯化合物分析方法 氯含量的测定 离子色谱法 |
China National Standards for |
English PDF |
GB/T 39284-2020 |
Treatment and disposal method for filter sludge from magnesium sulfate production process 硫酸镁生产滤泥的处理处置方法 |
China National Standards for |
English PDF |
GB/T 39249-2020 |
Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验 |
China National Standards for |
English PDF |
GB/T 39248-2020 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification 输送液化石油气和液化天然气用热塑性塑料多层(非硫化)软管及软管组合件 规范 |
China National Standards for |
English PDF |
GB/T 39163-2020 |
Test methods of the bonding strength for target-backing plate assemblies 靶材与背板结合强度测试方法 |
China National Standards for |
English PDF |
GB/T 39160-2020 |
Cadmium zinc telluride target for thin-film solar cells 薄膜太阳能电池用碲锌镉靶材 |
China National Standards for |
English PDF |
GB/T 39159-2020 |
High purity copper alloy target for integrated circuit 集成电路用高纯铜合金靶材 |
China National Standards for |
English PDF |
GB/T 39158-2020 |
High purity copper rotatable tube target for flat panel display 平面显示用高纯铜旋转管靶 |
China National Standards for |
English PDF |
GB/T 39157-2020 |
Classification and definition of the technology readiness levels for targets 靶材技术成熟度等级划分及定义 |
China National Standards for |
English PDF |
GB/T 39156-2020 |
Technical requirements and test methods for large format ceramic slab 大规格陶瓷板技术要求及试验方法 |
China National Standards for |
English PDF |
GB/T 35465.6-2020 |
Test method for fatigue properties of polymer matrix composite materials—Part 6:Fatige properties of adhesives in shear by tension 聚合物基复合材料疲劳性能测试方法 第6部分:胶粘剂拉伸剪切疲劳 |
China National Standards for |
English PDF |
GB/T 35465.5-2020 |
Test method for fatigue properties of polymer matrix composite materials—Part 5: Flexural fatigue 聚合物基复合材料疲劳性能测试方法 第5部分:弯曲疲劳 |
China National Standards for |
English PDF |
GB/T 35465.4-2020 |
Test method for fatigue properties of polymer matrix composite materials—Part 4: Tension-compression fatigue and compression-compression fatigue 聚合物基复合材料疲劳性能测试方法 第4部分:拉-压和压-压疲劳 |
China National Standards for |
English PDF |
GB/T 31334.6-2020 |
Test methods for dipped canvas—Part 6 : Determinations of size, grammage, etc 浸胶帆布试验方法 第6部分:尺寸、克重等基本项目测量 |
China National Standards for |
English PDF |
GB/T 26548.7-2020 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 7:Nibbler and shears 手持便携式动力工具 振动试验方法 第7部分:冲剪机和剪刀 |
China National Standards for |
English PDF |
GB/T 24982-2020 |
Garnet aluminate series of rare earth phosphors for white LED 白光LED用石榴石结构铝酸盐系列荧光粉 |
China National Standards for |
English PDF |
GB/T 23937-2020 |
Sodium hydrosulfide for industrial use 工业硫氢化钠 |
China National Standards for |
English PDF |
GB/T 23514-2020 |
Methods for chemical analysis of nuclear-grade Ag-In-Cd alloys 核级银-铟-镉合金化学分析方法 |
China National Standards for |
English PDF |
GB/T 23264-2020 |
Brake lining assembly for electric power assist bicycles 电动自行车用制动衬片总成 |
China National Standards for |
English PDF |
GB/T 20975.8-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 8:Determination of zinc content 铝及铝合金化学分析方法 第8部分:锌含量的测定 |
China National Standards for |
English PDF |
GB/T 20975.34-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 34:Determination of sodium content—Flame atomic absorption spectrometric method 铝及铝合金化学分析方法 第34部分:钠含量的测定 火焰原子吸收光谱法 |
China National Standards for |
English PDF |
GB/T 20975.33-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 33:Determination of potassium content—Flame atomic absorption spectrometric method 铝及铝合金化学分析方法 第33部分:钾含量的测定 火焰原子吸收光谱法 |
China National Standards for |
English PDF |
GB/T 20975.32-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 32:Determination of bismuth content 铝及铝合金化学分析方法 第32部分:铋含量的测定 |
China National Standards for |
English PDF |
GB/T 20975.20-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 20:Determination of gallium content—Butyrhodamine B spectrophotometric method 铝及铝合金化学分析方法 第20部分:镓含量的测定 丁基罗丹明B分光光度法 |
China National Standards for |
English PDF |
GB/T 20975.19-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 19:Determination of zirconium content 铝及铝合金化学分析方法 第19部分:锆含量的测定 |
China National Standards for |
English PDF |
GB/T 20975.15-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 15:Determination of boron content 铝及铝合金化学分析方法 第15部分:硼含量的测定 |
China National Standards for |
English PDF |
GB/T 20975.13-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 13:Determination of vanadium content 铝及铝合金化学分析方法 第13部分:钒含量的测定 |
China National Standards for |
English PDF |
GB/T 15593-2020 |
Plasticized poly(vinyl chloride) compounds for transfusion (infusion) equipment 输血(液)器具用聚氯乙烯塑料 |
China National Standards for |
English PDF |
GB/T 15331-2020 |
Test method for water vapor transmission rate of pressure-sensitive tapes 压敏胶粘带水蒸气透过率试验方法 |
China National Standards for |
English PDF |
GB/T 15330-2020 |
Test method for water penetration rate of pressure-sensitive tapes 压敏胶粘带水渗透率试验方法 |
China National Standards for |
English PDF |
GB/T 12688.10-2020 |
Test method of styrene for industrial use—Part 10: Determination of oxygenates—Gas chromatography 工业用苯乙烯试验方法 第10部分:含氧化合物的测定 气相色谱法 |
China National Standards for |
English PDF |
GB/T 5211.6-2020 |
General methods of test for pigments and extenders—Part 6: Determination of pH value of an aqueous suspension 颜料和体质颜料通用试验方法 第6部分:水悬浮液pH值的测定 |
China National Standards for |
English PDF |
GB/T 5211.3-2020 |
General methods of test for pigments and extenders—Part 3: Determination of matter volatile at 105℃ 颜料和体质颜料通用试验方法 第3部分:105℃挥发物的测定 |
China National Standards for |
English PDF |
GB/T 1741-2020 |
Test method for determining the resistance of paints film to mold 漆膜耐霉菌性测定法 |
China National Standards for |
English PDF |
GB/T 22517.6-2020 |
Technical requirements and test methods for sports field—Part 6: Track and field 体育场地使用要求及检验方法 第6部分:田径场地 |
China National Standards for |
English PDF |
Find out:29876Items | To Page of: First -Previous-Next -Last | [50] [51] [52] [53] [54] [55] [56] |