Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 83-1988 |
Square set screws with long dog point and rounded end 方头长圆柱球面端紧定螺钉 |
China National Standards n |
 English PDF |
| GB/T 829-1988 |
Slotted set screws with dog point 开槽圆柱端定位螺钉 |
China National Standards n |
English PDF |
| GB/T 828-1988 |
Slotted pan head set screws with dog point 开槽盘头定位螺钉 |
China National Standards n |
English PDF |
| GB/T 821-1988 |
Square set screws with chamfered end 方头倒角端紧定螺钉 |
China National Standards n |
English PDF |
| GB/T 817-1988 |
Slotted round nuts 带槽圆螺母 |
China National Standards n |
English PDF |
| GB/T 816-1988 |
Round nuts with set pin holes in side 侧面带孔圆螺母 |
China National Standards n |
English PDF |
| GB/T 812-1988 |
Round nuts 圆螺母 |
China National Standards n |
English PDF |
| GB/T 810-1988 |
Small round nuts 小圆螺母 |
China National Standards n |
English PDF |
| GB/T 809-1988 |
Insert round nuts 嵌装圆螺母 |
China National Standards n |
English PDF |
| GB/T 808-1988 |
Small hexagon thin nuts--Fine pitch thread 小六角特扁细牙螺母 |
China National Standards n |
English PDF |
| GB/T 807-1988 |
Knurled nuts 滚花薄螺母 |
China National Standards n |
English PDF |
| GB/T 806-1988 |
Knurled nut with collar 滚花高螺母 |
China National Standards n |
English PDF |
| GB/T 805-1988 |
Tight nuts 扣紧螺母 |
China National Standards n |
English PDF |
| GB/T 804-1988 |
Hexagon nuts with raised face 球面六角螺母 |
China National Standards n |
English PDF |
| GB/T 800-1988 |
Flat countersunk double nib bolts 沉头双榫螺栓 |
China National Standards n |
English PDF |
| GB/T 815-1988 |
Round nuts with drilled holes in one face 端面带孔圆螺母 |
China National Standards n |
English PDF |
| GB/T 72-1988 |
Slotted set screws with cone point 开槽锥端定位螺钉 |
China National Standards n |
English PDF |
| GB/T 63-1988 |
Lifting nuts 环形螺母 |
China National Standards n |
English PDF |
| GB/T 39-1988 |
Square nuts--Product grade C 方螺母 C级 |
China National Standards n |
English PDF |
| GB/T 32.3-1988 |
Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B 六角头头部带孔螺栓 细牙 A和B级 |
China National Standards n |
English PDF |
| GB/T 32.2-1988 |
Hexagon bolts with wire holes on head--Reduced shank--Product grade B 六角头头部带孔螺栓 细杆 B级 |
China National Standards n |
English PDF |
| GB/T 32.1-1988 |
Hexagon bolts with wire holes on head--Product grade A and B 六角头头部带孔螺栓 A和B级 |
China National Standards n |
English PDF |
| GB/T 31.3-1988 |
Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B 六角头螺杆带孔螺栓 细牙 A和B级 |
China National Standards n |
English PDF |
| GB/T 31.2-1988 |
Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B 六角头螺杆带孔螺栓 细杆 B级 |
China National Standards n |
English PDF |
| GB/T 56-1988 |
Hexagon thick nuts 六角厚螺母 |
China National Standards n |
English PDF |
| GB/T 9434-1988 |
Methods of measurement of gas discharge tubes for overvoltage protection 过电压保护气体放电管测试方法 |
China National Standards n |
English PDF |
| GB/T 9433-1988 |
General specification of gas discharge tubes for overvoltage protection 过电压保护气体放电管总规范 (可供认证用) |
China National Standards n |
English PDF |
| GB/T 9432-1988 |
Blank detail specification for industrial heating tetrode 工业加热用四极管空白详细规范 (可供认证用) |
China National Standards n |
English PDF |
| GB/T 9430-1988 |
Methods of test of luminance stability for fluorescent display tubes 荧光数码显示管亮度稳定性试验方法 |
China National Standards n |
English PDF |
| GB/T 9425-1988 |
Blank detail specification for semiconductor inte-grated circuit operational amplifiers 半导体集成电路运算放大器空白详细规范 (可供认证用) |
China National Standards n |
English PDF |
| GB/T 9409-1988 |
Specifications for colour TV demodulation equipment (1 TV+1 sound program) used in long-haul terres-trial analog radio-relay systems 长距离地面模拟微波接力系统 彩色电视解调机 (一路电视一路伴音) 技术条件 |
China National Standards n |
English PDF |
| GB/T 9408-1988 |
Specifications for colour TV modulation equipment (1 TV+1 sound program) used in long-haul terres-trial analog radio-relay systems 长距离地面模拟微波接力系统 彩色电视调制机 (一路电视一路伴音) 技术条件 |
China National Standards n |
English PDF |
| GB/T 9413-1988 |
Methods of measurement of modems for wide band using 60～108 kHz group band circuits 用于60～108 kHz基群电路的宽带调制解调器的测量方法 |
China National Standards n |
English PDF |
| GB/T 9412-1988 |
Modems for date transmission at 48 kilobits per second using 60～108 kHz group band circuits 用于60～108 kHz基群电路的48 kbit/s数据传输的调制解调器 |
China National Standards n |
English PDF |
| GB/T 9411-1988 |
Performance requirements for airborne marker beacon receiver 机载指点信标接收机性能要求 |
China National Standards n |
English PDF |
| GB/T 9391-1988 |
Shipborne radar，technical and operation requirements--Method of testing and required test results 船用雷达技术要求和使用要求 测试方法和要求的测试结果 |
China National Standards n |
English PDF |
| GB/T 9390-1988 |
Terminology for navigation 导航术语 |
China National Standards n |
English PDF |
| GB/T 9389-1988 |
Sound transmission using infrared radiation 用红外辐射的声传输 |
China National Standards n |
English PDF |
| GB/T 9388-1988 |
Methods of measurement for wireless microphonesystems 无线传声器系统测量方法 |
China National Standards n |
English PDF |
| GB/T 9367-1988 |
General specification of flyback transformers for color broadcasting TV receivers 彩色广播电视接收机用回扫变压器总技术条件 |
China National Standards n |
English PDF |
| GB/T 9382-1988 |
Bayes method of reliability demonstration testing for colour broadcasting TV receiver 彩色电视广播接收机可靠性验证试验 贝叶斯方法 |
China National Standards n |
English PDF |
| GB/T 9379-1988 |
Subjective tests and assessment for broadcasting television receivers 电视广播接收机主观试验评价方法 |
China National Standards n |
English PDF |
| GB/T 9377-1988 |
Methods of measurement for broadcasting transmitters used in MW or SW band 中波和短波广播发射机测量方法 |
China National Standards n |
English PDF |
| GB/T 9376-1988 |
Basic performance parameters for medium wave and shortwave AM broadcasting transmitters 中波和短波调幅广播发射机基本参数 |
China National Standards n |
English PDF |
| GB/T 9375-1988 |
Listening tests on radio receiver and/or tape recorder 收音机、录音机听音试验 |
China National Standards n |
English PDF |
| GB 9378-1988 |
Safety requirements for video-audio and pulse equipment of broadcasting television studio system 广播电视演播系统的视音频和脉冲设备安全要求 |
China National Standards n |
English PDF |
| GB/T 9363-1988 |
Information processing--9-Track， 12.7mm (0.5in) wide magnetictape for information interchange--Format and recording，using group coding at 246 cpmm(6250 cpi) 信息处理 信息交换用9磁道12.7mm(0.5in)磁带成组编码方式246 cpmm (6250 cpi) 的格式及记录 |
China National Standards n |
English PDF |
| GB/T 9403-1988 |
The reflection grayscale test chart 反射式灰度级测试图 |
China National Standards n |
English PDF |
| GB/T 9402-1988 |
Minimum performance requirements on high fidelity microphones 高保真传声器最低性能要求 |
China National Standards n |
English PDF |
| GB/T 9347-1988 |
Plastics--Vinyl chloride-vinyl acetate copolymers--Determination of vinyl acetate 氯乙烯-乙酸乙烯酯共聚物中乙酸乙烯酯的测定方法 |
China National Standards n |
English PDF |
| GB/T 1037-1988 |
Test method for water vapor transmission of plastic film and sheet--Cup method 塑料薄膜和片材透水蒸气性试验方法 杯式法 |
China National Standards n |
English PDF |
| GB/T 9312-1988 |
General specification of line printer 行式打印机通用技术条件 |
China National Standards n |
English PDF |
| GB/T 9311-1988 |
Adding machines and calculating machines--Keytop and printed or displayed symbols 加法器和计算器 键顶、打印或显示符号 |
China National Standards n |
English PDF |
| GB/T 9310-1988 |
Adding machines and calculating machines--Numeric section of ten-key keyboards 加法器和计算器 十键键盘的数字区 |
China National Standards n |
English PDF |
| GB/T 9309-1988 |
Office machines and data processing equipment--Functionkey symbols on typewriters 办公机器和数据处理设备 打字机功能键符号 |
China National Standards n |
English PDF |
| GB/T 9229-1988 |
Radioactive materials--Packagings--Tests for contents leakage and radiation leakage 放射性物质包装的内容物和辐射的泄漏检验 |
China National Standards n |
English PDF |
| GB/T 9226-1988 |
Certification of standardized radioactive sources 标准放射源的检验证书 |
China National Standards n |
English PDF |
| GB/T 9263-1988 |
Determination of slip resistance of antislip deck paint 防滑甲板漆防滑性的测定 |
China National Standards n |
English PDF |
| GB/T 9287-1988 |
Comparison of ease of dispersion of pigments--Oscillatory shaking method 颜料易分散程度的比较 振荡法 |
China National Standards n |
English PDF |
| GB/T 9274-1988 |
Paints and varnishes--Determination of resistance to liquids 色漆和清漆 耐液体介质的测定 |
China National Standards n |
English PDF |
| GB/T 9273-1988 |
Print-free test of film 漆膜无印痕试验 |
China National Standards n |
English PDF |
| GB/T 5211.14-1988 |
Determination of residue on sieve of pigment--Mechanical flushing procedure 颜料筛余物的测定 机械冲洗法 |
China National Standards n |
English PDF |
| GB/T 4958.9-1988 |
Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2:Mesurements for sub-systems--Section nine--Stand-by channel switching equipment 地面无线电接力系统所用设备的测量方法 第二部分:分系统的测量 第九节 备用通道倒换设备 |
China National Standards n |
English PDF |
| GB/T 4958.8-1988 |
Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2:Measurements for sub-systems--Section eight--Radio receivers 地面无线电接力系统所用设备的测量方法 第二部分:分系统的测量 第八节 接收机 |
China National Standards n |
English PDF |
| GB/T 4958.7-1988 |
Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2:Measurements for sub-systems--Section seven--Radio trsnsmitters 地面无线电接力系统所用设备的测量方法 第二部分:分系统的测量 第七节 发射机 |
China National Standards n |
English PDF |
| GB/T 4958.6-1988 |
Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2:Measurements for sub-systems--Section five--Frequency demodulators 地面无线电接力系统所用设备的测量方法 第二部分:分系统的测量 第五节 频率解调机 |
China National Standards n |
English PDF |
| GB/T 4958.5-1988 |
Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2:Measurements for sub-systems--Section four--Frequency modulators 地面无线电接力系统所用设备的测量方法 第二部分:分系统的测量 第四节 频率调制机 |
China National Standards n |
English PDF |
| GB/T 4958.4-1988 |
Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2:Measurements for sub-systems--Section one--General 地面无线电接力系统所用设备的测量方法 第二部分:分系统的测量 第一节 通则 |
China National Standards n |
English PDF |
| GB/T 4958.13-1988 |
Methods of measurement for equipment used in terrestrial radio-relay systems--Part 3:Simulated systems--Section five--Measurement of mutual inter-ference 地面无线电接力系统所用设备的测量方法 第三部分:仿真系统的测量 第五节 相互干扰的测量 |
China National Standards n |
English PDF |
| GB/T 4958.12-1988 |
Methods of measurement for equipment used in terrestrial radio-relay systems--Part 3:Simulated systems--Section four--Measurementsfor f.d.m. transmission 地面无线电接力系统所用设备的测量方法 第三部分:仿真系统的测量 第四节 频分复用传输的测量 |
China National Standards n |
English PDF |
| GB/T 4958.11-1988 |
Methods of measurement for aquipment used in terrestrial radio-relay systems--Part 3:Simulated systems--Section three--Measurements for mono-chrome and colour television transmission 地面无线电接力系统所用设备的测量方法 第三部分:仿真系统的测量 第三节 黑白和彩色电视传输的测量 |
China National Standards n |
English PDF |
| GB/T 4958.10-1988 |
Methods of measurement for equipment used in terrestrial radio-relay systems--Part 3:Simulated systems--Section one--General 地面无线电接力系统所用设备的测量方法 第三部分:仿真系统的测量 第一节 通则 |
China National Standards n |
English PDF |
| GB/T 9178-1988 |
Terminology for integrated circuits 集成电路术语 |
China National Standards n |
English PDF |
| GB/T 9158-1988 |
Mechanical test methods for windows 建筑用窗承受机械力的检测方法 |
China National Standards n |
English PDF |
| GB/T 9151-1988 |
Terms of drilling engineering 钻探工程名词术语 |
China National Standards n |
English PDF |
| GB/T 9105-1988 |
Glass blanks of photochromic spectacle lens 光致变色玻璃眼镜片毛坯 |
China National Standards n |
English PDF |
| GB/T 9171-1988 |
Engine oil--Determination of borderline pumping temperature 发动机油边界泵送温度测定法 |
China National Standards n |
English PDF |
| GB/T 9170-1988 |
Lubricating oils and fueloils--Determination of total nitrogen--Modified Kjeldahl method 润滑油及燃料油中总氮含量测定法(改进的克氏法) |
China National Standards n |
English PDF |
| GB/T 265-1988 |
Petroleum products--Determination of kinematic viscosity and calculation of dynamic viscosity 石油产品运动粘度测定法和动力粘度计算法 |
China National Standards n |
English PDF |
| GB/T 9090-1988 |
Standard capacitors 标准电容器 |
China National Standards n |
English PDF |
| GB/T 9110-1988 |
Crude oil vertical metal tank measurement--Method of calculation of quantities 原油立式金属罐计量 油量计量方法 |
China National Standards n |
English PDF |
| GB 9136-1988 |
The technical rules about gaseous radioactive waste processing system for light water reactor plants 轻水堆核电厂放射性废气处理系统技术规定 |
China National Standards n |
English PDF |
| GB 9135-1988 |
The technical rules about radioactive waste processing system for light water reactor plants 轻水堆核电厂放射性废液处理系统技术规定 |
China National Standards n |
English PDF |
| GB 9134-1988 |
The technical rules about solid radioactive waste processing system for light water reactor plants 轻水堆核电厂放射性固体废物处理系统技术规定 |
China National Standards n |
English PDF |
| GB 9132-1988 |
Regulations for shallow ground disposal of solid low-and intermediate-level radioactive wastes 低中水平放射性固体废物的浅地层处置规定 |
China National Standards n |
English PDF |
| GB/T 9068-1988 |
Determination of sound power levels for noise emitted by heating，ventilating and air conditioning equipments--Engineering method 采暖通风与空气调节设备噪声声功率级的测定 工程法 |
China National Standards n |
English PDF |
| GB/T 9065.3-1988 |
Hydraulic fluid power--Hose connector--Connecting dimension (Part 3--Welding or quick-action type) 液压软管接头 连接尺寸 焊接式或快换式 |
China National Standards n |
English PDF |
| GB/T 9074.9-1988 |
Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies 十字槽沉头螺钉和锥形锁紧垫圈组合件 |
China National Standards n |
English PDF |
| GB/T 9074.8-1988 |
Cross recessed small pan headscrew，single coil spring lock washer and plain washer assemblies 十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件 |
China National Standards n |
English PDF |
| GB/T 9074.7-1988 |
Cross recessed small pan head screw and single coil spring lock washer assemblies 十字槽小盘头螺钉和弹簧垫圈组合件 |
China National Standards n |
English PDF |
| GB/T 9074.4-1988 |
Cross recessed pan head screw，single coil spring lock washer and plain washer assemblies 十字槽盘头螺钉，弹簧垫圈和平垫圈组合件 |
China National Standards n |
English PDF |
| GB/T 9074.3-1988 |
Cross recessed pan head screw and single coil spring lock washer assemblies 十字槽盘头螺钉和弹簧垫圈组合件 |
China National Standards n |
English PDF |
| GB/T 9074.28-1988 |
Countersunk external toothed lock washer for assembly 组合件用锥形锁紧垫圈 |
China National Standards n |
English PDF |
| GB/T 9074.27-1988 |
Serrated lock washer external teeth for assembly 组合件用外锯齿锁紧垫圈 |
China National Standards n |
English PDF |
| GB/T 9074.26-1988 |
Single coil spring lock washer for assembly 组合件用弹簧垫圈 |
China National Standards n |
English PDF |
| GB/T 9074.2-1988 |
Cross recessed pan head screw andserrated lock washer external teeth assemblies 十字槽盘头螺钉和外锯齿锁紧垫圈组合件 |
China National Standards n |
English PDF |
| GB/T 9074.17-1988 |
Hexagon head bolt，single coil spring lock washer and plain washer assemblies 六角头螺栓， 弹簧垫圈和平垫圈组合件 |
China National Standards n |
English PDF |
| GB/T 9074.16-1988 |
Hexagon head bolt and serrated lock washer external teeth assemblies 六角头螺栓和外锯齿锁紧垫圈组合件 |
China National Standards n |
English PDF |
| GB/T 9074.15-1988 |
Hexagon head bolt and single coil spring lock washer assemblies 六角头螺栓和弹簧垫圈组合件 |
China National Standards n |
English PDF |
| GB/T 9074.13-1988 |
Cross recessed hexagon bolt with indentation，single coil lock washer and plain washer assemblies 十字槽凹穴六角头螺栓，弹簧垫圈和平垫圈组合件 |
China National Standards n |
English PDF |
| Find out:54343Items | To Page of: First -Previous-Next -Last | [529] [530] [531] [532] [533] [534] [535] |
+86-755-25831330
