GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 14799-2005 |
Geotextiles and geotextile-related products-Determination of the effective opening Size-Dry sieving method 土工布及其有关产品 有效孔径的测定 干筛法 |
China National Standards Size |
English PDF |
GB/T 3452.1-2005 |
Fluid power systems-O-rings-Part 1:Inside diameters,cross-sections,tolerances and Size identification code 液压气动用O形橡胶密封圈 第1部分:尺寸系列及公差 |
China National Standards Size |
English PDF |
GB/T 19816.2-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle Size distribution 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 |
China National Standards Size |
English PDF |
GB 11780-2005 |
The minimum mesh Size of the traw1 cod-end in South China Sea 南海区拖网网囊最小网目尺寸 |
China National Standards Size |
English PDF |
GB 11779-2005 |
The minimum mesh Size of the trawl cod-end in the East China Sea and Yellow Sea 东海、黄海区拖网网囊 最小网目尺寸 |
China National Standards Size |
English PDF |
GB/T 19628.2-2005 |
Industrial wire screens woven wire cloth-Guide to the choice of aperture Size and wire diameter combinations-Part 2:Preferred combination for woven wire cloth 工业用金属丝 网和金属丝编织网 网孔尺寸与金属丝直径组合选择指南 金属丝编织网的优先组合选择 |
China National Standards Size |
English PDF |
GB/T 19627-2005 |
Particle Size analysis-Photon correlation spectroscopy 粒度分析--光子相关光谱法 |
China National Standards Size |
English PDF |
GB/T 1047-2005 |
Pipework components-Definition and selection of DN (norminal Size) 管道元件 DN(公称尺寸)的定义和选用 |
China National Standards Size |
English PDF |
GB/T 19599.2-2004 |
Testing method for fishing nets of synthetic fibre--Size of netting 合成纤维渔网片试验方法 网片尺寸 |
China National Standards Size |
English PDF |
GB/T 13221-2004 |
Nanometer powder--Determination of particle Size distribution--Small angle X-ray scattering method 纳米粉末粒度分布的测定 X射线小角散射法 |
China National Standards Size |
English PDF |
GB/T 10322.7-2004 |
Iron ore--Determination of Size distribution by sieving 铁矿石 粒度分布的筛分测定 |
China National Standards Size |
English PDF |
GB/T 4267-2004 |
Rotating tools with parallel shanks--Diameters of shanks and Sizes of driving squares 直柄回转工具 柄部直径和传动方头的尺寸 |
China National Standards Size |
English PDF |
GB/T 6609.28-2004 |
Chemical analysis methods and determination of physical performance of alumina--Determination of the fine particle Size distribution(less than 60μm)--Method using electroformed sieves 氧化铝化学分析方法和物理性能测定方法 小于60μm的细粉末粒度分布的测定 湿筛法 |
China National Standards Size |
English PDF |
GB/T 10611-2003 |
Industrial screens--Designation and nominal Sizes of apertures 工业用网 标记方法与网孔尺寸系列 |
China National Standards Size |
English PDF |
GB/T 9185-2003 |
Photography--135-Size film and magazine--Specifications 摄影师 135规格胶片和暗盒 规范 |
China National Standards Size |
English PDF |
GB/T 6524-2003 |
Metallic powders--Determination of particle Size distribution by gravitational sedimentation in a liquid and attenuation measurement 金属粉末 粒度分布的测量 重力沉降光透法 |
China National Standards Size |
English PDF |
GB/T 9146-2003 |
General purpose metric screw threads--Limits of Sizes for the screw threads of coarse quality and preferable plan 普通螺纹 粗糙精度、优选系列的极限尺寸 |
China National Standards Size |
English PDF |
GB/T 9145-2003 |
General purpose metric screw threads--Limits of Sizes for the screw threads of medium quality and preferable plan 普通螺纹 中等精度、优选系列的极限尺寸 |
China National Standards Size |
English PDF |
GB/T 4458.5-2003 |
Mechanical drawings--Indication of tolerances for Size and of fits 机械制图 尺寸公差与配合注法 |
China National Standards Size |
English PDF |
GB/T 18780.2-2003 |
Geometrical Product Specifications(GPS)--Geometrical features--Part 2: Extracted median line of a cylinder and a cone,extracted median surface,local Size of an extracted feature 产品几何量技术规范(GPS) 几何要素 第2部分: 圆柱面和圆锥面的提取中心线、平行平面的提取中心面、提取要素的局部尺寸 |
China National Standards Size |
English PDF |
GB/T 1803-2003 |
Limits and fits--Tolerance zones for holes and shafts Size up to 18mm 极限与配合 尺寸至18 mm孔、轴公差带 |
China National Standards Size |
English PDF |
GB/T 6394-2002 |
Metal-methids for estimating the average grain Size 金属平均晶粒度测定法 |
China National Standards Size |
English PDF |
GB/T 14634.4-2002 |
Test methods of rare earth three-band phosphors for fluorescent lamps--Determination of particle Size distribution by electric sensing zone technique 灯用稀土三基色荧光粉试验方法 电传感法粒度分布测定 |
China National Standards Size |
English PDF |
GB/T 451.1-2002 |
Paper and board--Determination of Size and deviation 纸和纸板尺寸及偏斜度的测定 |
China National Standards Size |
English PDF |
GB/T 18491.1-2001 |
Information technology--Software measurement--Functional Size measurement--Part 1:Definition of concepts 信息技术 软件测量 功能规模测量 第1部分:概念定义 |
China National Standards Size |
English PDF |
GB/T 5758-2001 |
Determination for particle Size range,effective size and uniformity coefficient of ion exchange resins 离子交换树脂粒度、有效粒径和均一系数的测定 |
China National Standards Size |
English PDF |
GB/T 18230.7-2000 |
Hexagon nuts forstructural bolting,style 2,hot-dip galvanized(overSize tapped)--Product grade A--Property class 9 栓接结构用2型六角螺母 热浸镀锌(加大攻丝尺寸)A级 9级 |
China National Standards Size |
English PDF |
GB/T 18230.6-2000 |
Hexagon nuts for structural bolting,style 1,hot-dip galvanized (overSize tapped)--Product grades A and B--Property classes 5,6 and 8 栓接结构用1型六角螺母 热浸镀锌(加大攻丝尺寸) A和B级 5、6和8级 |
China National Standards Size |
English PDF |
GB/T 9258.3-2000 |
Coatedabrasives--Grain Size analysis--Part 3:Determination of grain size distributionof microgrits P240 to P2500 涂附磨具用磨料 粒度分析 第3部分:微粉P240~P2500粒度组成的测定 |
China National Standards Size |
English PDF |
GB/T 9258.1-2000 |
Coated abrasives--Grain Size analysis--Part 1:Grain size distribution test 涂附磨具用磨料 粒度分析 第1部分:粒度组成 |
China National Standards Size |
English PDF |
GB/T 788-1999 |
Formats and their Sizes of books and magazines 图书和杂志开本及其幅面尺寸 |
China National Standards Size |
English PDF |
GB/T 12496.2-1999 |
Test methods of wooden activated carbon--Determination of particle Size distribution 木质活性炭试验方法 粒度的测定 |
China National Standards Size |
English PDF |
GB/T 3301-1999 |
Standard method for measurement of volume,rim diameter allowance, hight allowance, weight allowance and Size of defects of domestic ceramic ware 日用陶瓷的容积、口径误差、高度误差、重量误差、缺陷尺寸的测定方法 |
China National Standards Size |
English PDF |
GB/T 17634-1998 |
Geotextiles and geotextile-related products--Determination of the characteristic opening Size--Wet sievingmethod 土工布及其有关产品 有效孔径的测定 湿筛法 |
China National Standards Size |
English PDF |
GB/T 2481.1-1998 |
Bonded abrasives--Determination and designation of grain Size distribution--Part 1:Macrogrits F4 to F220 固结磨具用磨料 粒度组成的检测和标记 第1部分:粗磨粒 F4~F220 |
China National Standards Size |
English PDF |
GB/T 2837-1998 |
Measuring method for Size and deviation of vitrified clay pipe 陶管尺寸及偏差测量方法 |
China National Standards Size |
English PDF |
GB/T 3294-1998 |
Method of inspection for last Sizes 鞋楦尺寸检测方法 |
China National Standards Size |
English PDF |
GB/T 3293.1-1998 |
Shoe Sizes 鞋号 |
China National Standards Size |
English PDF |
GB/T 7702.2-1997 |
Standard test method for granular activated carbon from coal--Determination of particle Size 煤质颗粒活性炭试验方法 粒度的测定 |
China National Standards Size |
English PDF |
GB/T 5900.3-1997 |
Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 3:Bayonet type 机床 主轴端部与花盘 互换性尺寸 第3部分:卡口型 |
China National Standards Size |
English PDF |
GB/T 5900.2-1997 |
Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 2:Camlock type 机床 主轴端部与花盘 互换性尺寸 第2部分:凸轮锁紧型 |
China National Standards Size |
English PDF |
GB/T 148-1997 |
Writing paper and certain classes of printed matter--Trimmed Sizes--A and B series 印刷、书写和绘图纸幅面尺寸 |
China National Standards Size |
English PDF |
GB/T 147-1997 |
Writing paper and certain classes printed matter--Untrimmed Sizes 印刷、书写和绘图用原纸尺寸 |
China National Standards Size |
English PDF |
GB/T 16880-1997 |
Guidelines for photomask defect classification and Size definition 光掩模缺陷分类和尺寸定义的准则 |
China National Standards Size |
English PDF |
GB/T 3328-1997 |
Furniture--Main Sizes of beds 家具 床类主要尺寸 |
China National Standards Size |
English PDF |
GB/T 3327-1997 |
Furniture--Main Sizes of cabinets 家具 柜类主要尺寸 |
China National Standards Size |
English PDF |
GB/T 3326-1997 |
Furniture--Main Sizes of tables and seats 家具 桌、椅、凳类主要尺寸 |
China National Standards Size |
English PDF |
GB/T 6406-1996 |
Super abrasive--Grain Sizes of diamond or cubic boron nitride 超硬磨料 金刚石或立方氮化硼颗粒尺寸 |
China National Standards Size |
English PDF |
GB/T 16144-1995 |
Annual limits on intakes for radioactive aerosol with different particle Size 不同粒度放射性气溶胶年摄入量限值 |
China National Standards Size |
English PDF |
GB/T 15467-1995 |
Graphic technology--Sheet-fed printing machines--Range of Sizes 印刷技术 单张纸印刷机 尺寸系列 |
China National Standards Size |
English PDF |
GB/T 2005-1994 |
Coke for metallurgy--Determination of coke breeze content and Size consist 冶金焦炭的焦末含量及筛分组成的测定方法 |
China National Standards Size |
English PDF |
GB/T 15057.11-1994 |
Limestone for chemical industry--Determination of Size 化工用石灰石粒度的测定 |
China National Standards Size |
English PDF |
GB/T 15054.5-1994 |
Miniature screw threads--Limits of Sizes 小螺纹 极限尺寸 |
China National Standards Size |
English PDF |
GB/T 13918-1992 |
Sizes of format paper used by office machine in non-continuous forms 办公机器用非连续格式纸尺寸系列 |
China National Standards Size |
English PDF |
GB/T 13723-1992 |
Generic specification for medium Size computer 中型数字电子计算机通用技术条件 |
China National Standards Size |
English PDF |
GB/T 13247-1991 |
Ferroalloys--Sampling and testing methods for determination of grain Size 铁合金产品粒度的取样和检测方法 |
China National Standards Size |
English PDF |
GB/T 13220-1991 |
Determination of particle Size distribution of fine powder--Method of sieve classfication with sonic wave 细粉末粒度分布的测定 声波筛分法 |
China National Standards Size |
English PDF |
GB/T 12811-1991 |
Test method for average cell Size of rigid cellular plastics 硬质泡沫塑料平均泡孔尺寸试验方法 |
China National Standards Size |
English PDF |
GB/T 12005.7-1989 |
Determination of particle Size of powder polyacry-lamide 粉状聚丙烯酰胺粒度测定方法 |
China National Standards Size |
English PDF |
GB/T 11107-1989 |
Metallic and its compound powder--Determination of specific surface and particle Size by air permeating method 金属及其化合物粉末 比表面积和粒度测定 空气透过法 |
China National Standards Size |
English PDF |
GB/T 2007.7-1987 |
General rules for the sampling and sample preparation of minerals in bulk--The method for determination of Size by manual sieving 散装矿产品取样、制样通则 粒度测定方法 手工筛分法 |
China National Standards Size |
English PDF |
GB/T 7393-1987 |
Basic Size of outlet of cable distribution systems intended for sound and television signals 声音和电视信号的电缆分配系统输出口基本尺寸 |
China National Standards Size |
English PDF |
GB/T 6288-1986 |
Determination of particle Size for granular molecular sieve 粒状分子筛粒度测定方法 |
China National Standards Size |
English PDF |
GB/T 4873-1985 |
Continuous forms used for information processing--Sizes and feed holes 信息处理用连续格式纸 尺寸和输送孔 |
China National Standards Size |
English PDF |
GB/T 4197-1984 |
Method for measuring the average grain Size of sintered bar and rod of tungsten molybdenum and alloys 钨钼及其合金的烧结坯条、棒材晶粒度测试方法 |
China National Standards Size |
English PDF |
GB/T 4195-1984 |
Method for measuring the distribution of the powder Size of tungsten and molybdenum method by the balance for the fall of the particles 钨、钼粉末粒度分布测试方法(沉降天平法) |
China National Standards Size |
English PDF |
Find out:366Items | To Page of: First -Previous-Next -Last | 1 2 3 4 |