GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 28932-2012 |
Regulation of infeCTious diseases prevention and control in primary and secondary schools 中小学校传染病预防控制工作管理规范 |
China National Standards CT |
English PDF |
GB/T 29429-2012 |
DeteCTion and identification of Xanthomonas fragariae Kennedy & King 草莓角斑病菌检疫鉴定方法 |
China National Standards CT |
English PDF |
GB/T 29393-2012 |
DeteCTion and identification of Candidatus liberobacter asiaticum 柑桔黄龙病菌的检疫检测与鉴定 |
China National Standards CT |
English PDF |
GB 50860-2013 |
Standard method of measurement for affiliated struCTure works 构筑物工程工程量计算规范 |
China National Standards CT |
English PDF |
GB 50855-2013 |
Standard method of measurement for pseudo-classic architeCTural works 仿古建筑工程工程量计算规范 |
China National Standards CT |
English PDF |
GB 50854-2013 |
Standard method of measurement for building construCTion and fitting-out works 房屋建筑与装饰工程工程量计算规范 |
China National Standards CT |
English PDF |
GB 50500-2013 |
Code of bills of quantities and valuation for construCTion works 建设工程工程量清单计价规范 |
China National Standards CT |
English PDF |
GB/T 50851-2013 |
ConstruCTion project data standard of labour,materials,equipments and machines 建设工程人工材料设备机械数据标准 |
China National Standards CT |
English PDF |
GB/T 50844-2013 |
Evaluation code for implementation of engineering construCTion standard 工程建设标准实施评价规范 |
China National Standards CT |
English PDF |
GB 50842-2013 |
Code for construCTion and acceptance of building materials mine engineering 建材矿山工程施工与验收规范 |
China National Standards CT |
English PDF |
GB 50836-2013 |
Code for construCTion and acceptance of 1000KV high voltage electric equipment (GIS, HGIS, disconnector and surge arrester) 1000kV高压电器(GIS、HGIS、隔离开关、避雷器)施工及验收规范 |
China National Standards CT |
English PDF |
GB 50835-2013 |
Code for construCTion and acceptance of 1000kv power transformer, oil-immersed reactor and mutual inductor 1000kV电力变压器、油浸电抗器、互感器施工及验收规范 |
China National Standards CT |
English PDF |
GB 50834-2013 |
Code for construCTion and acceptance of 1000KV lattice frame and support 1000kV构支架施工及验收规范 |
China National Standards CT |
English PDF |
GB/T 50832-2013 |
Standard for acceptance test of eleCTric equipment of 1000KV system electric equipment installation engineering 1000kV系统电气装置安装工程电气设备交接试验标准 |
China National Standards CT |
English PDF |
GB/T 50820-2013 |
Standard for design document of construCTion projects in building materials mines 建材矿山工程建设项目设计文件编制标准 |
China National Standards CT |
English PDF |
GB 50819-2013 |
Code for construCTion of oil and gas field gathering and transmission pipeline 油气田集输管道施工规范 |
China National Standards CT |
English PDF |
GB/T 50818-2013 |
Mechanized ultrasonic testing technology specification for oil & gas construCTion pipeline project 石油天然气管道工程全自动超声波检测技术规范 |
China National Standards CT |
English PDF |
GB 50814-2013 |
Code for design environmental proteCTion of electronic engineering 电子工程环境保护设计规范 |
China National Standards CT |
English PDF |
GB 50286-2013 |
Code for design of levee projeCT 堤防工程设计规范 |
China National Standards CT |
English PDF |
GB 50847-2012 |
Code for construCTion and acceptance of communication engineering for fiber to the home in residential districts and residential buildings 住宅区和住宅建筑内光纤到户通信设施工程施工及验收规范 |
China National Standards CT |
English PDF |
GB 50846-2012 |
Code for design of communication engineering for fiber to the home in residential distriCTs and residential buildings 住宅区和住宅建筑内光纤到户通信设施工程设计规范 |
China National Standards CT |
English PDF |
GB 29215-2012 |
National Food Safety Standard - Food Additive - Plants ACTivated Carbon (Wood Activated Carbon) 食品安全国家标准 食品添加剂 植物活性炭(木质活性炭) |
China National Standards CT |
English PDF |
GB/T 3246.1-2012 |
InspeCTion method for structure of wrought aluminum and aluminum alloy products Part 1 : Inspection method for microstructure 变形铝及铝合金制品组织检验方法 第1部分:显微组织检验方法 |
China National Standards CT |
English PDF |
GB/T 28944-2012 |
VeCTor surveillance and control in emergencies - Flood disaster 病媒生物应急监测与控制 水灾 |
China National Standards CT |
English PDF |
GB/T 28943-2012 |
Principle and guideline of risk assessment of veCTors - Rodent 病媒生物危害风险评估原则与指南 鼠类 |
China National Standards CT |
English PDF |
GB/T 28942-2012 |
Sampling procedure of veCTor infected by pathogens - Flea 病媒生物感染病原体采样规程 蚤 |
China National Standards CT |
English PDF |
GB/T 28941-2012 |
Sampling procedure of veCTor infected by pathogens - Mosquito 病媒生物感染病原体采样规程 蚊虫 |
China National Standards CT |
English PDF |
GB/T 28940-2012 |
Sampling procedure of veCTor infected by pathogens - Rodent 病媒生物感染病原体采样规程 鼠类 |
China National Standards CT |
English PDF |
GB/T 17222-2012 |
Health proteCTion zone for coal gas industry 煤制气业卫生防护距离 |
China National Standards CT |
English PDF |
GB 28931-2012 |
Safety and sanitation standard for chlorine dioxide disinfeCTant generator 二氧化氯消毒剂发生器安全与卫生标准 |
China National Standards CT |
English PDF |
GB 18071.8-2012 |
Health proteCTion zone for basic chemistry industry - Part 8: Hydrofluoric acid industry 基础化学原料制造业卫生防护距离 第8部分:氢氟酸制造业 |
China National Standards CT |
English PDF |
GB 11666.2-2012 |
Health proteCTion zone for fertilizer industry - Part 2:Phosphate fertilizer industry 肥料制造业卫生防护距离 第2部分:磷肥制造业 |
China National Standards CT |
English PDF |
GB 11666.1-2012 |
Health proteCTion zone for fertilizer industry - Part 1:Nitrogen fertilizer industry 肥料制造业卫生防护距离 第1部分:氮肥制造业 |
China National Standards CT |
English PDF |
GB 11662-2012 |
Health proteCTion zone for sintering industry 烧结业卫生防护距离 |
China National Standards CT |
English PDF |
GB 11655.6-2012 |
Health proteCTion zone for synthetic material industry - Part 6:Chloroprene rubber industry 合成材料制造业卫生防护距离 第6部分:氯丁橡胶制造业 |
China National Standards CT |
English PDF |
GB 11655.1-2012 |
Health proteCTion zone for synthetic material industry - Part 1:Polyvinyl chloride industry 合成材料制造业卫生防护距离 第1部分:聚氯乙烯制造业 |
China National Standards CT |
English PDF |
GB 11654.1-2012 |
Health proteCTion zone for paper and paper products industry - Part 1:Pulp and paper industry 造纸及纸制品业卫生防护距离 第1部分:纸浆制造业 |
China National Standards CT |
English PDF |
GB/T 6102.2-2012 |
Test method for moisture regain in raw cotton - EleCTrical resistance meter 原棉回潮率试验方法 电阻法 |
China National Standards CT |
English PDF |
GB/T 17780.6-2012 |
Textile machinery - Safety requirements - Part 6: Fabric manufaCTuring machinery 纺织机械 安全要求 第6部分:织造机械 |
China National Standards CT |
English PDF |
GB 4706.108-2012 |
Household and similar eleCTrical appliances-Safety - Part 2: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings 家用和类似用途电器的安全 第2部分:电热地毯和安装在可移动地板覆盖物下方的用于加热房间的电热装置的特殊要求 |
China National Standards CT |
English PDF |
GB 10810.4-2012 |
Uncut finished speCTacle lenses - Part 4: Specifications and test methods for anti-reflective coatings 眼镜镜片 第4部分:减反射膜规范及测量方法 |
China National Standards CT |
English PDF |
GB/T 28893-2012 |
Surface Chemical Analysis - Auger eleCTron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results 表面化学分析 俄歇电子能谱和X射线光电子能谱 测定峰强度的方法和报告结果所需的信息 |
China National Standards CT |
English PDF |
GB/T 28892-2012 |
Surface chemical analysis - X-ray photoeleCTron spectroscopy -Description of selected instrumental performance parameters 表面化学分析 X射线光电子能谱 选择仪器性能参数的表述 |
China National Standards CT |
English PDF |
GB/T 28891-2012 |
Fibre-reinforced plastic composites - Determination of mode Ⅰinterlaminar fraCTure toughness GⅠC for unidirectionally reinforced materials 纤维增强塑料复合材料 单向增强材料Ⅰ型层间断裂韧性GⅠC的测定 |
China National Standards CT |
English PDF |
GB/T 28738-2012 |
Finned built-in heat pipe for all-glass evacuated solar colleCTor tubes 全玻璃真空太阳集热管内置式带翅片的金属热管 |
China National Standards CT |
English PDF |
GB/T 17780.4-2012 |
Textile machinery - Safety requirements - Part 4: Yarn processing,cordage and rope manufaCTuring machinery 纺织机械 安全要求 第4部分:纱线和绳索加工机械 |
China National Standards CT |
English PDF |
GB 8176-2012 |
Safety produCTion codes for presswork 冲压车间安全生产通则 |
China National Standards CT |
English PDF |
GB 21976.7-2012 |
Escape apparatus for building fire - Part 7: Filtering respiratory proteCTive devices for self-rescue from fire 建筑火灾逃生避难器材 第7部分:过滤式消防自救呼吸器 |
China National Standards CT |
English PDF |
GB 15735-2012 |
Requirements for the safety and health in produCTion process of metal heat treatment 金属热处理生产过程安全、卫生要求 |
China National Standards CT |
English PDF |
GB/T 3286.4-2012 |
Methods for chemical analysis of limestone and dolomite - Part 4: The determination of iron oxide content - The o-phenanthroline speCTrophotometric method and the flame atomic absorption spectrometric method 石灰石及白云石化学分析方法 第4部分:氧化铁含量的测定 邻二氮杂菲分光光度法和火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 3286.3-2012 |
Methods for chemical analysis of limestone and dolomite - Part 3: The determination of aluminium oxide content - The chrome azurol S speCTrophotometric method and the complexometric titration method 石灰石及白云石化学分析方法 第3部分:氧化铝含量的测定 铬天青S分光光度法和络合滴定法 |
China National Standards CT |
English PDF |
GB/T 3286.2-2012 |
Methods for chemical analysis of limestone and dolomite - Part 2: The determination of silicon dioxide content - The silicomolybdic blue speCTrophotometric method and the perchloric acid dehydration gravimetric method 石灰石及白云石化学分析方法 第2部分:二氧化硅含量的测定 硅钼蓝分光光度法和高氯酸脱水重量法 |
China National Standards CT |
English PDF |
GB/T 3286.1-2012 |
Methods for chemical analysis of limestone and dolomite - Part 1: The determination of calcium oxide and magnesium oxide content - The complexometric titration method and the flame atomic absorption speCTrometric method 石灰石及白云石化学分析方法 第1部分:氧化钙和氧化镁含量的测定 络合滴定法和火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 28909-2012 |
Extra-high strength struCTural steel plates in the heat-treatment condition 超高强度结构用热处理钢板 |
China National Standards CT |
English PDF |
GB/T 28905-2012 |
Low yield strength steel plates for construCTion 建筑用低屈服强度钢板 |
China National Standards CT |
English PDF |
GB/T 28902-2012 |
EleCTvolytic polishing for stainless steel wires 电解抛光用不锈钢丝 |
China National Standards CT |
English PDF |
GB/T 28896-2012 |
Metallic Materials - Method of test for the determination of quasistatic fraCTure toughness of welds 金属材料 焊接接头准静态断裂韧度测定的试验方法 |
China National Standards CT |
English PDF |
GB/T 28895-2012 |
ProteCTive clothing - Performance requirements of oil repellency, sorl release, antistatic clothing 防护服装 抗油易去污防静电防护服 |
China National Standards CT |
English PDF |
GB/T 28764-2012 |
Test method for sealing charaCTeristics of packaging containers - Ultrasonic method 包装容器密闭性检测方法 超声波法 |
China National Standards CT |
English PDF |
GB/T 2608-2012 |
Silica refraCTory bricks 硅砖 |
China National Standards CT |
English PDF |
GB/T 20166.2-2012 |
Chemical analysis methods of rare earth polishing powder - Part 2: Determination fluorine content - Ion seleCTive electrode analysis 稀土抛光粉化学分析方法 第2部分:氟量的测定 离子选择性电极法 |
China National Standards CT |
English PDF |
GB/T 18301-2012 |
RefraCTory products - Determination of resistance to abrasion at ambient temperature 耐火材料 常温耐磨性试验方法 |
China National Standards CT |
English PDF |
GB/T 16763-2012 |
Shaped insulating refraCTory products - Classification 定形隔热耐火制品分类 |
China National Standards CT |
English PDF |
GB/T 14999.4-2012 |
Test methods for superalloys - Part 4: Determination of charaCTerizing banding grains and primary carbides distribution of superalloy rollings 高温合金试验方法 第4部分:轧制高温合金条带晶粒组织和一次碳化物分布测定 |
China National Standards CT |
English PDF |
GB/T 14999.3-2012 |
Test methods for superalloys - Part 3: Verification of longitudinal fraCTure of bars 高温合金试验方法 第3部分:棒材纵向断口检验 |
China National Standards CT |
English PDF |
GB/T 14999.2-2012 |
Test methods for superalloys - Part 2: Verification of transverse macro-struCTures and defect by etch 高温合金试验方法 第2部分:横向低倍组织及缺陷酸浸检验 |
China National Standards CT |
English PDF |
GB/T 14999.1-2012 |
Test method for superalloys - Part 1: Verification of longitudinal macro-struCTures and defect by etch 高温合金试验方法 第1部分:纵向低倍组织及缺陷酸浸检验 |
China National Standards CT |
English PDF |
GB/T 14975-2012 |
Seamless stainless steel tubes for struCTure 结构用不锈钢无缝钢管 |
China National Standards CT |
English PDF |
GB/T 12770-2012 |
Welded stainless steel tubes for mechanical struCTures 机械结构用不锈钢焊接钢管 |
China National Standards CT |
English PDF |
GB/T 1234-2012 |
High resistance alloys for eleCTrical heating 高电阻电热合金 |
China National Standards CT |
English PDF |
GB/T 10325-2012 |
Shaped refraCTory products-rule of acceptance,sampling and inspection 定形耐火制品验收抽样检验规则 |
China National Standards CT |
English PDF |
GB 4706.64-2012 |
Safety of household and similar eleCTrical appliances - Part 2: Particular requirements for scissor type grass shears 家用和类似用途电器的安全 第2部分:剪刀型草剪的专用要求 |
China National Standards CT |
English PDF |
GB 3883.9-2012 |
Safety of hand-held motor-operated eleCTric tools - Part 2: Particular requirements for tappers 手持式电动工具的安全 第2部分:攻丝机的专用要求 |
China National Standards CT |
English PDF |
GB 3883.8-2012 |
Safety of hand-held motor-operated eleCTric tools - Part 2: Particular requirements for sheet metal shears and nibblers 手持式电动工具的安全 第2部分:电剪刀和电冲剪的专用要求 |
China National Standards CT |
English PDF |
GB 3883.7-2012 |
Safety of hand-held motor-operated eleCTric tools - Part 2: Particular requirements for hammers 手持式电动工具的安全 第2部分:锤类工具的专用要求 |
China National Standards CT |
English PDF |
GB 3883.6-2012 |
Safety of hand-held motor-operated eleCTric tools - Part 2: Particular requirements for drills and impact drills 手持式电动工具的安全 第2部分:电钻和冲击电钻的专用要求 |
China National Standards CT |
English PDF |
GB 3883.4-2012 |
Safety of hand-held motor-operated eleCTric tools - Part 2: Particular requirements for sanders and polishers other than disk type 手持式电动工具的安全 第2部分:非盘式砂光机和抛光机的专用要求 |
China National Standards CT |
English PDF |
GB 3883.2-2012 |
Safety of hand-held motor-operated eleCTric tools - Part 2: Particular requirements for screwdrivers and impact wrenches 手持式电动工具的安全 第2部分:螺丝刀和冲击扳手的专用要求 |
China National Standards CT |
English PDF |
GB 3883.21-2012 |
Safety of hand-held motor-operated eleCTric tools - Part 2: Particular requirements for band saws 手持式电动工具的安全 第2部分:带锯的专用要求 |
China National Standards CT |
English PDF |
GB 3883.20-2012 |
Safety of hand-held motor-operated eleCTric tools - Part 2: Particular requirements for strapping tools 手持式电动工具的安全 第2部分:捆扎机的专用要求 |
China National Standards CT |
English PDF |
GB 3883.19-2012 |
Safety of hand-held motor-operated eleCTric tools - Part 2: Particular requirements for drain cleaners 手持式电动工具的安全 第2部分:管道疏通机的专用要求 |
China National Standards CT |
English PDF |
GB 3883.12-2012 |
Safety of hand-held motor-operated eleCTric tools - Part 2: Particular requirements for concrete vibrators 手持式电动工具的安全 第2部分:混凝土振动器的专用要求 |
China National Standards CT |
English PDF |
GB 3883.11-2012 |
Safety of hand-held motor-operated eleCTric tools - Part 2: Particular requirements for reciprocating saws(jig and sabre saws) 手持式电动工具的安全 第2部分:往复锯(曲线锯、刀锯)的专用要求 |
China National Standards CT |
English PDF |
GB 28881-2012 |
Hand proteCTion - Protective gloves against chemicals and micro-organisms 手部防护 化学品及微生物防护手套 |
China National Standards CT |
English PDF |
GB 19215.3-2012 |
Cable trunking and duCTing systems for electrical installations - Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations 电气安装用电缆槽管系统 第2部分:特殊要求 第2节:安装在地板下和与地板齐平的电缆槽管系统 |
China National Standards CT |
English PDF |
GB 18082.1-2012 |
Health proteCTion zone for leather and fur and manufactured products industry - Part 1:Leather tanning industry 皮革、毛皮及其制品业卫生防护距离 第1部分:皮革鞣制加工业 |
China National Standards CT |
English PDF |
GB 18079-2012 |
Health proteCTion zone for gelatin industry 动物胶制造业卫生防护距离 |
China National Standards CT |
English PDF |
GB 17464-2012 |
ConneCTing devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2 (included) 连接器件 电气铜导线 螺纹型和无螺纹型夹紧件的安全要求 适用于0.2 mm2以上至35 mm2(包括)导线的夹紧件的通用要求和特殊要求 |
China National Standards CT |
English PDF |
GB/T 28789-2012 |
Video traffic incident deteCTor 视频交通事件检测器 |
China National Standards CT |
English PDF |
GB/T 28788-2012 |
Road geography data colleCTion and quality control 公路地理信息数据采集与质量控制 |
China National Standards CT |
English PDF |
GB/T 983-2012 |
Covered eleCTrodes for manual metal arc welding of stainless and heat-resisting steels 不锈钢焊条 |
China National Standards CT |
English PDF |
GB/T 8017-2012 |
Standard test method for vapor pressure of petroleum produCTs (Reid Method) 石油产品蒸气压的测定 雷德法 |
China National Standards CT |
English PDF |
GB/T 7631.13-2012 |
Lubricants,industrial oils and related produCTs(class L) - Classification - Part 13: Family A(Total loss systems) 润滑剂、工业用油和有关产品(L类)的分类 第13部分:A组(全损耗系统) |
China National Standards CT |
English PDF |
GB/T 5118-2012 |
Covered eleCTrodes for manual metal arc welding of creep-resisting steels 热强钢焊条 |
China National Standards CT |
English PDF |
GB/T 5117-2012 |
Covered eleCTrodes for manual metal arc welding of non-alloy and fine grain steels 非合金钢及细晶粒钢焊条 |
China National Standards CT |
English PDF |
GB/T 4214.7-2012 |
Household and similar eleCTrical appliances - Test code for determination of airborne acoustical noise - Particular requirements for tumble dryers 家用和类似用途电器噪声测试方法 滚筒式干衣机的特殊要求 |
China National Standards CT |
English PDF |
GB/T 28803-2012 |
DireCTives for risk management of consumer products safety 消费品安全风险管理导则 |
China National Standards CT |
English PDF |
GB/T 28781-2012 |
Pneumatic fluid power CompaCT cylinders, bores form 20mm to 100mm - Basic dimensions and mounting dimensions 气动 缸内径20mm至100mm的紧凑型气缸 基本尺寸、安装尺寸 |
China National Standards CT |
English PDF |
GB/T 19876-2012 |
Safety of machinery ― Positioning of safeguards with respeCT to the approach speeds of parts of the human body 机械安全 与人体部位接近速度相关的安全防护装置的定位 |
China National Standards CT |
English PDF |
GB/T 15706-2012 |
Safety of machinery — General principles for design - Risk assessment and risk reduCTion 机械安全 设计通则 风险评估与风险减小 |
China National Standards CT |
English PDF |
Find out:19661Items | To Page of: First -Previous-Next -Last | [99] [100] [101] [102] [103] [104] [105] |