GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 2804-2008 |
Modular parts of fixture construCTion ;general features,profiles and dimensions 组合夹具元件结构要素 |
China National Standards CT |
English PDF |
GB/T 16637-2008 |
General requirements for gas turbine eleCTrical equipment 轻型燃气轮机电气设备通用技术要求 |
China National Standards CT |
English PDF |
GB/T 21528-2008 |
Bee produCTs production management regulation 蜜蜂产品生产管理规范 |
China National Standards CT |
English PDF |
GB/Z 21702-2008 |
Code on quality and safety control of fishery produCTs for export 出口水产品质量安全控制规范 |
China National Standards CT |
English PDF |
GB/Z 21701-2008 |
Code of quality and safety control on poultry and poultry produCTs for export 出口禽肉及制品质量安全控制规范 |
China National Standards CT |
English PDF |
GB/Z 21700-2008 |
Code on quality and safety control of eel produCTs for export 出口鳗鱼制品质量安全控制规范 |
China National Standards CT |
English PDF |
GB/T 21704-2008 |
Determination of non-protein-nitrogen content in milk and dairy produCTs 乳与乳制品中非蛋白氮含量的测定 |
China National Standards CT |
English PDF |
GB/T 21674-2008 |
DeteCTing porcine circovirus with polymerase chain reaction 猪圆环病毒聚合酶链反应试验方法 |
China National Standards CT |
English PDF |
GB/T 22838.17-2009 |
Determination of physical charaCTeristics for cigarettes and filter rods - Part 17: Cigarettes - Determination of loss of tobacco from the ends - Method using a vibro-bench 卷烟和滤棒物理性能的测定 第17部分:卷烟 端部掉落烟丝的测定 振动法 |
China National Standards CT |
English PDF |
GB 21519-2008 |
Minimum allowable values of the energy efficiency and energy efficiency grades for eleCTrical storage water heaters 储水式电热水器能效限定值及能效等级 |
China National Standards CT |
English PDF |
GB 21518-2008 |
Minimum allowable values of energy efficiency and energy efficiency grades for AC contaCTors 交流接触器能效限定值及能效等级 |
China National Standards CT |
English PDF |
GB/T 9290-2008 |
Surface aCTive agents - Technical ethoxylated fatty amines - Method of analysis 表面活性剂 工业乙氧基化脂肪胺 分析方法 |
China National Standards CT |
English PDF |
GB/T 6371-2008 |
Surface aCTive agents - Textile auxiliaries - Determination of detergency 表面活性剂 纺织助剂 洗涤力的测定 |
China National Standards CT |
English PDF |
GB/T 6369-2008 |
Surface aCTive agents - Determination of emulsifying power - Colorimetric method 表面活性剂 乳化力的测定 比色法 |
China National Standards CT |
English PDF |
GB/T 6368-2008 |
Surface aCTive agents - Determination of pH of aqueous solution - Potentiometric method 表面活性剂 水溶液pH值的测定 电位法 |
China National Standards CT |
English PDF |
GB/T 21529-2008 |
Determination of water vapour transmission rate for plastic film and sheeting - EleCTrolytic detection sensor method 塑料薄膜和薄片水蒸气透过率的测定 电解传感器法 |
China National Standards CT |
English PDF |
GB/T 191-2008 |
Packaging - PiCTorial marking for handling of goods 包装储运图示标志 |
China National Standards CT |
English PDF |
GB/T 16266-2008 |
Test method of packaging materials - ContaCT corrosion 包装材料试验方法 接触腐蚀 |
China National Standards CT |
English PDF |
GB/T 14188-2008 |
General rules for seleCTion and using of packaging materials with volatile corrosion inhibitor 气相防锈包装材料选用通则 |
China National Standards CT |
English PDF |
GB/T 11543-2008 |
Surface aCTive agents - The identification of emulsion for moderate to high viscosity and the evaluation method of emulsifying capability 表面活性剂 中、高粘度乳液的特性测试及其乳化能力的评价方法 |
China National Standards CT |
English PDF |
GB 18582-2008 |
Indoor decorating and refurbishing materials - Limit of harmful substances of interior architeCTural coatings 室内装饰装修材料 内墙涂料中有害物质限量 |
China National Standards CT |
English PDF |
GB/T 9871-2008 |
Rubber,vulcanized or thermoplastic-Determination of aging charaCTeristics by measurement of stress relaxation 硫化橡胶或热塑性橡胶老化性能的测定 拉伸应力松弛试验 |
China National Standards CT |
English PDF |
GB/T 8923.2-2008 |
Preparation of steel substrates before application of paints and related produCTs-Visual assessment of surface cleanliness - Part 2: Preparation grades of praviously coated steel substrates after localized removal of previous coatings 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第2部分: 已涂覆过的钢材表面局部清除原有涂层后的处理等级 |
China National Standards CT |
English PDF |
GB/T 6908-2008 |
Analysis of water used in boil and cooling system-Determination of eleCTrical conductivity 锅炉用水和冷却水分析方法 电导率的测定 |
China National Standards CT |
English PDF |
GB/T 21629-2008 |
Dangerous goods - Bullet impaCT test method of division 1.6 article 危险品 1.6项物品的子弹撞击试验方法 |
China National Standards CT |
English PDF |
GB/T 21625-2008 |
Dangerous goods - Bullet impaCT test method of extremely insensitive detonating substance 危险品 极不敏感引爆物质的子弹撞击试验方法 |
China National Standards CT |
English PDF |
GB/T 21619-2008 |
Dangerous goods - Test method for flammable solids, which in contaCTing with water emit flammable gases 危险品 易燃固体遇水放出易燃气体试验方法 |
China National Standards CT |
English PDF |
GB/T 21607-2008 |
Test method of one-generation reproduCTion toxicity for chemicals 化学品一代繁殖毒性试验方法 |
China National Standards CT |
English PDF |
GB/T 21595-2008 |
Dangerous goods - ImpaCT test method for portable tank 危险品 便携式罐体撞击试验方法 |
China National Standards CT |
English PDF |
GB/T 21567-2008 |
Dangerous goods - Test method for impaCT sensitivity of explosives substance 危险品 爆炸品撞击感度试验方法 |
China National Standards CT |
English PDF |
GB/T 21566-2008 |
Dangerous goods - Test method for friCTion sensitivity of explosives substance 危险品 爆炸品摩擦感度试验方法 |
China National Standards CT |
English PDF |
GB/T 21526-2008 |
StruCTural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding 结构胶粘剂 粘接前金属和塑料表面处理导则 |
China National Standards CT |
English PDF |
GB/T 21525-2008 |
Inorganic chemical produCTs for industrial use - General method for determination of magnesium content by complexation titration 无机化工产品中镁含量测定的通用方法 络合滴定法 |
China National Standards CT |
English PDF |
GB/T 21524-2008 |
Particle size determination of inorganic chemical produCTs - Sieving method 无机化工产品中粒度的测定 筛分法 |
China National Standards CT |
English PDF |
GB/T 18838.4-2008 |
Preparation of steel substrates before application of paints and related produCTs-Specifications for metallic blast-cleaning abrasives - Part 4:Low-carbon cast-steel shot 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第4部分: 低碳铸钢丸 |
China National Standards CT |
English PDF |
GB/T 18838.3-2008 |
Preparation of steel substrates before application of paints and related produCTs-Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第3部分: 高碳铸钢丸和砂 |
China National Standards CT |
English PDF |
GB/T 18570.12-2008 |
Preparation of steel substrates before application of paints and related produCTs-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第12部分: 水溶性铁离子的现场滴定测定法 |
China National Standards CT |
English PDF |
GB/T 13288.1-2008 |
Preparation of steel substrates before application of paints and related produCTs-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义 |
China National Standards CT |
English PDF |
GB/T 12832-2008 |
Rubber-Determination of crystallization effeCTs by hardness measurements 橡胶结晶效应的测定 硬度测量法 |
China National Standards CT |
English PDF |
GB/T 12737-2008 |
Chemical produCTs for industrial use-General method for determination of traces of sulphur compounds, as sulphate, by reduction and titrimetry 工业用化工产品中以硫酸根表示的痕量硫化合物测定的通用方法 还原和滴定法 |
China National Standards CT |
English PDF |
GB/T 10656-2008 |
Analysis of water used in boiler and cooling system - Determination of zinc - Zincon speCTrophotometry 锅炉用水和冷却水分析方法 锌离子的测定 锌试剂分光光度法 |
China National Standards CT |
English PDF |
GB/T 9043-2008 |
General technical requirements of gas discharge tubes for the over-voltage proteCTion of telecommunications installations 通信设备过电压保护用气体放电管通用技术条件 |
China National Standards CT |
English PDF |
GB/T 3482-2008 |
Lightning test method for eleCTronic equipments 电子设备雷击试验方法 |
China National Standards CT |
English PDF |
GB/T 21548-2008 |
Methods of measurement of the high speed semiconduCTor lasers directly modulated for optical fiber communication systems 光通信用高速直接调制半导体激光器的测量方法 |
China National Standards CT |
English PDF |
GB/T 21546-2008 |
Critical current measurement - DC critical current of Nb-Ti composite superconduCTors 铌钛复合超导体的直流临界电流测量 |
China National Standards CT |
English PDF |
GB/T 21545-2008 |
Principles of proteCTion against overvoltages and overcurrents 通信设备过电压过电流保护导则 |
China National Standards CT |
English PDF |
GB/T 15972.54-2008 |
Specifications for optical fibre test methods - Part 54: Measurement methods and test procedures for environmental charaCTeristics - Gamma irradiation 光纤试验方法规范 第54部分:环境性能的测量方法和试验程序 伽玛辐照 |
China National Standards CT |
English PDF |
GB/T 15972.53-2008 |
Specifications for optical fibre test methods - Part 53: Measurement methods and test procedures for environmental charaCTeristics - Water immersion 光纤试验方法规范 第53部分:环境性能的测量方法和试验程序 浸水 |
China National Standards CT |
English PDF |
GB/T 15972.52-2008 |
Specifications for optical fibre test methods - Part 52: Measurement methods and test procedures for environmental charaCTeristics - Change of temperature 光纤试验方法规范 第52部分:环境性能的测量方法和试验程序 温度循环 |
China National Standards CT |
English PDF |
GB/T 15972.51-2008 |
Specifications for optical fibre test methods - Part 51: Measurement methods and test procedures for environmental charaCTeristics - Dry heat 光纤试验方法规范 第51部分: 环境性能的测量方法和试验程序 干热 |
China National Standards CT |
English PDF |
GB/T 15972.49-2008 |
Specifications for optical fibre test methods - Part 49: Measurement methods and test procedures for transmission and optical charaCTeristics - Differential mode delay 光纤试验方法规范 第49部分:传输特性和光学特性的测量方法和试验程序-微分模时延 |
China National Standards CT |
English PDF |
GB/T 15972.47-2008 |
Specifications for optical fibre test methods - Part 47: Measurement methods and test procedures for transmission and optical charaCTeristics - Macrobending loss 光纤试验方法规范 第47部分:传输特性和光学特性的测量方法和试验程序 宏弯损耗 |
China National Standards CT |
English PDF |
GB/T 15972.46-2008 |
Specifications for optical fibre test methods - Part 46: Measurement methods and test procedures for transmission and optical charaCTeristics - Monitoring of changes in optical transmittance 光纤试验方法规范 第46部分:传输特性和光学特性的测量方法和试验程序 透光率变化 |
China National Standards CT |
English PDF |
GB/T 15972.45-2008 |
Specifications for optical fibre test methods - Part 45: Measurement methods and test procedures for transmission and optical charaCTeristics - Mode field diameter 光纤试验方法规范 第45部分:传输特性和光学特性的测量方法和试验程序 模场直径 |
China National Standards CT |
English PDF |
GB/T 15972.44-2008 |
Specifications for optical fibre test methods - Part 44: Measurement methods and test procedures for transmission and optical charaCTeristics - Cut-off wavelength 光纤试验方法规范 第44部分:传输特性和光学特性的测量方法和试验程序 截止波长 |
China National Standards CT |
English PDF |
GB/T 15972.43-2008 |
Specifications for optical fibre test methods - Part 43: Measurement methods and test procedures for transmission and optical charaCTeristics - Numerrical aperture 光纤试验方法规范 第43部分:传输特性和光学特性的测量方法和试验程序 数值孔径 |
China National Standards CT |
English PDF |
GB/T 15972.42-2008 |
Specifications for optical fibre test methods - Part 42: Measurement methods and test procedures for transmission and optical charaCTeristics - Chromatic dispersion 光纤试验方法规范 第42部分:传输特性和光学特性的测量方法和试验程序 波长色散 |
China National Standards CT |
English PDF |
GB/T 15972.41-2008 |
Specifications for optical fibre test methods - Part 41: Measurement methods and test procedures for transmission and optical charaCTeristics - Bandwidth 光纤试验方法规范 第41部分:传输特性和光学特性的测量方法和试验程序 带宽 |
China National Standards CT |
English PDF |
GB/T 15972.34-2008 |
Specifications for optical fibre test methods - Part 34: Measurement methods and test procedures for mechanical charaCTeristics - Fibre curl 光纤试验方法规范 第34部分:机械性能的测量方法和试验程序 光纤翘曲 |
China National Standards CT |
English PDF |
GB/T 15972.33-2008 |
Specifications for optical fibres test methods - Part 33: Measurement methods and test procedures for mechanical charaCTeristics - Stress corrosion susceptibility 光纤试验方法规范 第33部分:机械性能的测量方法和试验程序 应力腐蚀敏感性参数 |
China National Standards CT |
English PDF |
GB/T 15972.32-2008 |
Specifications for optical fibre test methods - Part 32: Measurement methods and test procedures for mechanical charaCTeristics - Coating strippability 光纤试验方法规范 第32部分:机械性能的测量方法和试验程序 涂覆层可剥性 |
China National Standards CT |
English PDF |
GB/T 15972.31-2008 |
Specifications for optical fibre test methods - Part 31: Measurement methods and test procedures for mechanical charaCTeristics - tensile strength 光纤试验方法规范 第31部分:机械性能的测量方法和试验程序 抗张强度 |
China National Standards CT |
English PDF |
GB/T 17454.3-2008 |
Safety of machinery - Pressure-sensitive proteCTive devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices 机械安全 压敏保护装置 第3部分: 压敏缓冲器、压敏板、压敏线及类似装置的设计和试验通则 |
China National Standards CT |
English PDF |
GB/T 17454.2-2008 |
Safety of machinery - Pressure-sensitive proteCTive devices - Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars 机械安全 压敏保护装置 第2部分∶ 压敏边和压敏棒的设计和试验通则 |
China National Standards CT |
English PDF |
GB/T 17454.1-2008 |
Safety of machinery - Pressure - sensitive proteCTive devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors 机械安全 压敏保护装置 第1部分: 压敏垫和压敏地板的设计和试验通则 |
China National Standards CT |
English PDF |
GB/Z 18620.4-2008 |
Cylindrical gears - Code of inspeCTion practice - Part 4: Reommendations relative to surface texture and tooth contact pattern checking 圆柱齿轮 检验实施规范 第4部分:表面结构和轮齿接触斑点的检验 |
China National Standards CT |
English PDF |
GB/Z 18620.3-2008 |
Cylindrical gears - Code of inspeCTion practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes 圆柱齿轮 检验实施规范 第3部分: 齿轮坯、轴中心距和轴线平行度的检验 |
China National Standards CT |
English PDF |
GB/Z 18620.2-2008 |
Cylindrical gears - Code of inspeCTion practice - Part 2: Inspetion related to radial composite deviations,runout, tooth thickness and backlash 圆柱齿轮 检验实施规范 第2部分: 径向综合偏差、径向跳动、齿厚和侧隙的检验 |
China National Standards CT |
English PDF |
GB/Z 18620.1-2008 |
Cylindrical gears - Code of inspeCTion practice-Part 1: Inspection of corresponding flanks of gear teeth 圆柱齿轮 检验实施规范 第1部分: 轮齿同侧齿面的检验 |
China National Standards CT |
English PDF |
GB/T 6150.5-2008 |
Methods for chemical analysis of tungsten concentrates - Determination of calcium content - EDTA volumetric method and flame atomic absorption speCTrometric method 钨精矿化学分析方法 钙量的测定 EDTA容量法和火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 6150.15-2008 |
Methods for chemical analysis of tungsten concentrates - Determination of bismuth content - Flame atomic absorption speCTrometric method 钨精矿化学分析方法 铋量的测定 火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 6150.14-2008 |
Methods for chemical analysis of tungsten concentrates - Determination of manganese content - The ammonium ferrous sulfate volumetric method and flame atomic absorption speCTrometric method 钨精矿化学分析方法 锰量的测定 硫酸亚铁铵容量法和火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 6150.11-2008 |
Methods for chemical analysis of tungsten concentrates - Determination of zinc content - Flame atomic absorption speCTrometric method 钨精矿化学分析方法 锌量的测定 火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 6150.10-2008 |
Methods for chemical analysis of tungsten concentrates - Determination of lead content - Flame atomic absorption speCTrometric method 钨精矿化学分析方法 铅量的测定 火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 3952-2008 |
Copper drawing stock for eleCTrical purpose 电工用铜线坯 |
China National Standards CT |
English PDF |
GB/T 3253.6-2008 |
Methods for chemical analysis of antimony and antimony trioxide - Determination of selenium content - Atomic fluorescence speCTrometer method 锑及三氧化二锑化学分析方法 硒量的测定 原子荧光光谱法 |
China National Standards CT |
English PDF |
GB/T 3253.5-2008 |
Methods for chemical analysis of antimony and antimony trioxide - Determination of copper content - Flame atomic absorption speCTrometric method 锑及三氧化二锑化学分析方法 铜量的测定 火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 3253.3-2008 |
Methods for chemical analysis of antimony and antimony trioxide - Determination of lead content - Flame atomic absorption speCTrometric method 锑及三氧化二锑化学分析方法 铅量的测定 火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 3253.2-2008 |
Methods for chemical analysis of antimony and antimony trioxide - Determination of iron content - Orthophenanthroline speCTrophotometric method 锑及三氧化二锑化学分析方法 铁量的测定 邻二氮杂菲分光光度法 |
China National Standards CT |
English PDF |
GB/T 3253.1-2008 |
Methods for chemical analysis of antimony and antimony trioxide - Determination of arsenic content - Arsenic molybdenum blue speCTrophotometric method 锑及三氧化二锑化学分析方法 砷量的测定 砷钼蓝分光光度法 |
China National Standards CT |
English PDF |
GB/T 2650-2008 |
ImpaCT test methods on welded joints 焊接接头冲击试验方法 |
China National Standards CT |
English PDF |
GB/T 20975.9-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 9:Determination of lithium content Flame atomic absorption speCTrometric method 铝及铝合金化学分析方法 第9部分:锂含量的测定 火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 20975.7-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 7:Determination of manganese content Potassium periodate speCTrophotometric method 铝及铝合金化学分析方法 第7部分: 锰含量的测定 高碘酸钾分光光度法 |
China National Standards CT |
English PDF |
GB/T 20975.6-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 6:Determination of cadmium content Flame atomic absorption speCTrometric method 铝及铝合金化学分析方法 第6部分:镉含量的测定 火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 20975.23-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 23:Determination of antimony content Potassium iodide speCTrophotometric method 铝及铝合金化学分析方法 第23部分:锑含量的测定 碘化钾分光光度法 |
China National Standards CT |
English PDF |
GB/T 20975.22-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 22:Determination of beryllium content SCR speCTrophotometric method 铝及铝合金化学分析方法 第22部分:铍含量的测定 依莱铬氰兰R分光光度法 |
China National Standards CT |
English PDF |
GB/T 20975.21-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 21:Determination of calcium content Flame atomic absorption speCTrometric method 铝及铝合金化学分析方法 第21部分:钙含量的测定 火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 20975.20-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 20:Determination of gallium content Butyrhodamine B speCTrophotometric method 铝及铝合金化学分析方法 第20部分:镓含量的测定 丁基罗丹明B分光光度法 |
China National Standards CT |
English PDF |
GB/T 20975.17-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 17: Determination of strontium content Flame atomic absorption speCTrometric method 铝及铝合金化学分析方法 第17部分:锶含量的测定 火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 20975.13-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 13:Determination of vanadium content N-benzoyl-Nphenylhydroxylamine speCTrophotometric method 铝及铝合金化学分析方法 第13部分: 钒含量的测定 苯甲酰苯胲分光光度法 |
China National Standards CT |
English PDF |
GB/T 20975.11-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 11:Determination of lead content Flame atomic absorption speCTrometric method 铝及铝合金化学分析方法 第11部分:铅含量的测定 火焰原子吸收光谱法 |
China National Standards CT |
English PDF |
GB/T 19867.3-2008 |
Welding procedure specification for eleCTron beam welding 电子束焊接工艺规程 |
China National Standards CT |
English PDF |
GB/T 19198-2008 |
Testing method for thermo-eleCTromotive force of precious metals and their alloys pair up with platinum or copper 贵金属及其合金对铂、对铜热电动势的测量方法 |
China National Standards CT |
English PDF |
GB/T 17473.7-2008 |
Test methods of precious metals pastes used for microeleCTronics - Determination of solderability and solderelaching resistance 微电子技术用贵金属浆料测试方法 可焊性、耐焊性测定 |
China National Standards CT |
English PDF |
GB/T 17473.6-2008 |
Test methods of precious metal pastes used for microeleCTronics - Determination of resolution 微电子技术用贵金属浆料测试方法 分辨率测定 |
China National Standards CT |
English PDF |
GB/T 17473.5-2008 |
Test methods of pastes used for microeleCTronics - Determination of viscosity 微电子技术用贵金属浆料测试方法 粘度测定 |
China National Standards CT |
English PDF |
GB/T 17473.4-2008 |
Test methods of precious metals pastes used for microeleCTronics - Determination of adhesion 微电子技术用贵金属浆料测试方法 附着力测定 |
China National Standards CT |
English PDF |
GB/T 17473.3-2008 |
Test methods of precious metals pastes used for microeleCTronics Determination of sheet resistance 微电子技术用贵金属浆料测试方法 方阻测定 |
China National Standards CT |
English PDF |
GB/T 17473.2-2008 |
Test methods of presious metals pastes used for microeleCTronics - Determination of fineness 微电子技术用贵金属浆料测试方法 细度测定 |
China National Standards CT |
English PDF |
GB/T 17473.1-2008 |
Test methods of precious metals pastes used for microeleCTronics-Determination of solids content 微电子技术用贵金属浆料测试方法 固体含量测定 |
China National Standards CT |
English PDF |
Find out:19661Items | To Page of: First -Previous-Next -Last | [147] [148] [149] [150] [151] [152] [153] |