Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB 19212.2-2012 |
Safety of power transformers, power supplies, reactors and similar products - Part 2: PartiCular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications 电力变压器、电源、电抗器和类似产品的安全 第2部分：一般用途分离变压器和内装分离变压器的电源的特殊要求和试验 |
China National Standards Cu |
 English PDF |
| GB 19212.14-2012 |
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 14: PartiCular requirements and tests for auto transformers and power supply units incorporating auto transformers 电源电压为1 100V及以下的变压器、电抗器、电源装置和类似产品的安全 第14部分：自耦变压器和内装自耦变压器的电源装置的特殊要求和试验 |
China National Standards Cu |
English PDF |
| GB 16915.5-2012 |
Switches for household and similar fixed electrical installations - Part 2-4: PartiCular requirements - Isolating switches 家用和类似用途固定式电气装置的开关 第2-4部分：隔离开关的特殊要求 |
China National Standards Cu |
English PDF |
| GB 16895.5-2012 |
Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overCurrent 低压电气装置 第4-43部分：安全防护 过电流保护 |
China National Standards Cu |
English PDF |
| GB 16895.27-2012 |
Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - AgriCultural and horticultural premises 低压电气装置 第7-705部分：特殊装置或场所的要求 农业和园艺设施 |
China National Standards Cu |
English PDF |
| GB 10810.5-2012 |
UnCut finished spectacle lenses - Part 5: Requirements of abrasion-resistant for spectacle lens surfaces 眼镜镜片 第5部分: 镜片表面耐磨要求 |
China National Standards Cu |
English PDF |
| GB/T 28620-2012 |
The calCulating methods of remanufacturing rate 再制造率的计算方法 |
China National Standards Cu |
English PDF |
| GB/T 28615-2012 |
Green manufacturing - The technology specification for metal-Cutting machine tool remanufacturing 绿色制造 金属切削机床再制造技术导则 |
China National Standards Cu |
English PDF |
| GB/T 28614-2012 |
Green manufacturing - The general technique guideline for dry Cutting 绿色制造 干式切削 通用技术指南 |
China National Standards Cu |
English PDF |
| GB/T 28566-2012 |
SeCurity specification and its evaluation for generating unit interconnection 发电机组并网安全条件及评价 |
China National Standards Cu |
English PDF |
| GB/T 28565-2012 |
High-voltage alternating-Current series capacitor by-pass switches 高压交流串联电容器用旁路开关 |
China National Standards Cu |
English PDF |
| GB/T 28563-2012 |
Electrical testing of thyristor valves for ±800kV ultra high voltage direct Current (UHVDC) power transmission ±800kV特高压直流输电用晶闸管阀电气试验 |
China National Standards Cu |
English PDF |
| GB/T 28548-2012 |
Guideline of nuclear power plant primary cirCuit hydraulic tests 核电厂主回路水压试验技术导则 |
China National Standards Cu |
English PDF |
| GB/T 28541-2012 |
Insulation co-ordination for equipments of ±800kV high voltage direct Current converter stations ±800kV高压直流换流站设备的绝缘配合 |
China National Standards Cu |
English PDF |
| GB/T 28538-2012 |
Ophthalmic optics?Contact lenses and contact lenses care products - Determination of biocompatibility by oCular study with rabbit eyes 眼科光学 接触镜和接触镜护理产品 兔眼相容性研究试验 |
China National Standards Cu |
English PDF |
| GB/T 28576-2012 |
CalCulation of industrial rack design 工业货架设计计算 |
China National Standards Cu |
English PDF |
| GB/T 28530-2012 |
Aligned series of international freight forwarding doCuments - Documentary data entry 国际货运代理系列单证 单证数据项 |
China National Standards Cu |
English PDF |
| GB/T 28523-2012 |
Method of calCulating recoverability rate of telecommunication infrastructure equipment 通信网络设备可回收利用率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 28522-2012 |
Method of calCulating recoverability rate of telecommunication terminal equipment 通信终端产品可回收利用率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 28511.2-2012 |
Integrated optical path devices based on planar lightwave cirCuit - Part 2 ：DWDM filter based on AWG technology 平面光波导集成光路器件 第2部分：基于阵列波导光栅（AWG）技术的密集波分复用（DWDM）滤波器 |
China National Standards Cu |
English PDF |
| GB/T 28511.1-2012 |
Integrated optical path devices based on planar lightwave cirCuit - Part 1：Optical power splitter based on PLC technology 平面光波导集成光路器件 第1部分：基于平面光波导（PLC）的光功率分路器 |
China National Standards Cu |
English PDF |
| GB/T 28508-2012 |
General technical requirements for broadband Customer network based on telecommunication network 基于公用电信网的宽带客户网络总体技术要求 |
China National Standards Cu |
English PDF |
| GB/T 28507-2012 |
Description guidelines for voice exhibition of web doCuments 互联网文本语音展现通用描述规范 |
China National Standards Cu |
English PDF |
| GB/T 28458-2012 |
Information seCurity technology - Vulnerability identification and description specification 信息安全技术 安全漏洞标识与描述规范 |
China National Standards Cu |
English PDF |
| GB/T 28455-2012 |
Information seCurity technology - Entity authentication involving a trusted third party and access architecture specification 信息安全技术 引入可信第三方的实体鉴别及接入架构规范 |
China National Standards Cu |
English PDF |
| GB/T 28454-2012 |
Information technology - SeCurity techniques - Selection, deployment and operations of intrusion detection systems 信息技术 安全技术 入侵检测系统的选择、部署和操作 |
China National Standards Cu |
English PDF |
| GB/T 28453-2012 |
Information seCurity technology - Information system security management assessment requirements 信息安全技术 信息系统安全管理评估要求 |
China National Standards Cu |
English PDF |
| GB/T 28452-2012 |
Information seCurity technology - Common security technique requirement for application software system 信息安全技术 应用软件系统通用安全技术要求 |
China National Standards Cu |
English PDF |
| GB/T 28451-2012 |
Information seCurity technology - Technical requirements and testing and evaluation approaches for network-based intrusion prevention system products 信息安全技术 网络型入侵防御产品技术要求和测试评价方法 |
China National Standards Cu |
English PDF |
| GB/T 28450-2012 |
Information seCurity technology - Guidelines for information security management system auditing 信息安全技术 信息安全管理体系审核指南 |
China National Standards Cu |
English PDF |
| GB/T 28449-2012 |
Information seCurity technology - Testing and evaluation process guide for classified protection of information system security 信息安全技术 信息系统安全等级保护测评过程指南 |
China National Standards Cu |
English PDF |
| GB/T 28448-2012 |
Information seCurity technology - Testing and evaluation requirement for classified protection of information system 信息安全技术 信息系统安全等级保护测评要求 |
China National Standards Cu |
English PDF |
| GB/T 28447-2012 |
Information seCurity technology - Specification on the operation management of a certificate authority 信息安全技术 电子认证服务机构运营管理规范 |
China National Standards Cu |
English PDF |
| GB/T 28424-2012 |
Graphical symbols and Cutline for use in equipment of TV monitoring system for traffic 交通电视监控系统设备用图形符号及图例 |
China National Standards Cu |
English PDF |
| GB/T 28407-2012 |
Regulation for gradation on agriCulture land quality 农用地质量分等规程 |
China National Standards Cu |
English PDF |
| GB/T 28406-2012 |
Regulations for valuation on agriCulture land 农用地估价规程 |
China National Standards Cu |
English PDF |
| GB/T 28405-2012 |
Regulations for classification on agriCulture land 农用地定级规程 |
China National Standards Cu |
English PDF |
| GB/T 28397-2012 |
Evaluation indexes and computation of cirCular economy for coal mining area 煤炭矿区循环经济评价指标及计算方法 |
China National Standards Cu |
English PDF |
| GB/T 25068.2-2012 |
Information technology - SeCurity techniques - IT network security - Part 2: Network security architecture 信息技术 安全技术 IT网络安全 第2部分：网络安全体系结构 |
China National Standards Cu |
English PDF |
| GB/T 25068.1-2012 |
Information technology - SeCurity techniques - IT network security - Part 1: Network security management 信息技术 安全技术 IT网络安全 第1部分：网络安全管理 |
China National Standards Cu |
English PDF |
| GB/T 17626.34-2012 |
Electromagnetic compatibility - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains Current more than 16 A per phase 电磁兼容 试验和测量技术 主电源每相电流大于16A的设备的电压暂降、短时中断和电压变化抗扰度试验 |
China National Standards Cu |
English PDF |
| GB 18078.1-2012 |
Health protection zone for agriCultural and sideline food processing industry - Part 1：Slaughter，meat-processing industry 农副食品加工业卫生防护距离 第1部分：屠宰及肉类加工业 |
China National Standards Cu |
English PDF |
| GB/T 9704-2012 |
Layout key for official doCument of Party and government organs 党政机关公文格式 |
China National Standards Cu |
English PDF |
| GB 50171-2012 |
Code for construction and acceptance of switchbord outfit complete Cubicle and secondary circuit electric equipment installation engineering 电气装置安装工程盘、柜及二次回路接线施工及验收规范 |
China National Standards Cu |
English PDF |
| GB 913-2012 |
MerCury 汞 |
China National Standards Cu |
English PDF |
| GB/T 28280-2012 |
Plain bearings - Quality characteristics - CalCulation of machine and process capabilities 滑动轴承 质量特性 机器能力及过程能力的计算 |
China National Standards Cu |
English PDF |
| GB/T 28279.2-2012 |
Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for calCulation of oil-lubricated plain journal bearings with drainage grooves 滑动轴承 稳态条件下带回油槽流体静压径向滑动轴承 第2部分：带回油槽油润滑径向滑动轴承计算的特性值 |
China National Standards Cu |
English PDF |
| GB/T 28279.1-2012 |
Plain bearing - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 1: CalCulation of oil-lubricated plain journal bearings with drainage grooves 滑动轴承 稳态条件下带回油槽流体静压径向滑动轴承 第1部分：带回油槽油润滑径向滑动轴承的计算 |
China National Standards Cu |
English PDF |
| GB/T 28278.2-2012 |
Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for calCulation of oil-lubricated plain journal bearings without drainage grooves 滑动轴承 稳态条件下不带回油槽流体静压径向滑动轴承 第2部分：不带回油槽油润滑径向滑动轴承计算的特性值 |
China National Standards Cu |
English PDF |
| GB/T 28278.1-2012 |
Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 1: CalCulation of oil-lubricated plain journal bearings without drainage grooves 滑动轴承 稳态条件下不带回油槽流体静压径向滑动轴承 第1部分：不带回油槽油润滑径向滑动轴承的计算 |
China National Standards Cu |
English PDF |
| GB/T 28277-2012 |
Silicon-based MEMS fabrication technology - Measurement method of Cutting and pull-press strength of micro bonding area 硅基MEMS制造技术 微键合区剪切和拉压强度检测方法 |
China National Standards Cu |
English PDF |
| GB/T 28392-2012 |
Road construction and road maintenance machinery and equipment - Hot-air recirCulating-type asphalt pavement hot recycling and maintenance machine 道路施工与养护机械设备 热风式沥青混合料再生修补机 |
China National Standards Cu |
English PDF |
| GB/T 28390-2012 |
High speed five-side machining center for Curtain wall aluminium alloy profiles 幕墙铝型材高速五面加工中心 |
China National Standards Cu |
English PDF |
| GB/T 28389.1-2012 |
Auto index milling head with axes A,C of main drive - Part 1: Testing of acCuracy 主传动驱动型AC轴自动分度铣头 第1部分：精度检验 |
China National Standards Cu |
English PDF |
| GB/T 28388.1-2012 |
Swinging linkage milling head with axes A,C - Part 1: Testing of acCuracy 摆动式AC轴联动铣头 第1部分：精度检验 |
China National Standards Cu |
English PDF |
| GB/T 28386-2012 |
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - AcCuracy grades 2 and 3 印刷、纸加工、造纸机械和辅助设备的噪声测量方法 准确度等级2和3 |
China National Standards Cu |
English PDF |
| GB/T 18961-2012 |
Forestry machinery - Portable hand-held brush-Cutters and grass-trimmers - Vocabulary 林业机械 便携式割灌机和割草机 词汇 |
China National Standards Cu |
English PDF |
| GB/T 15370.4-2012 |
General requirement of agriCultural tractors - Part 4: Crawler tractors 农业拖拉机 通用技术条件 第4部分：履带拖拉机 |
China National Standards Cu |
English PDF |
| GB/T 14176-2012 |
Forestry machinery - Gasoline powered portable brush Cutters and grass trimmers 林业机械 以汽油机为动力的便携式割灌机和割草机 |
China National Standards Cu |
English PDF |
| GB 28304-2012 |
National Food Safety Standard - Food Additive - Curdlan Gum 食品安全国家标准 食品添加剂 可得然胶 |
China National Standards Cu |
English PDF |
| GB 28314-2012 |
National Food Safety Standard Food Additive CapsiCum Oleoresin 食品安全国家标准 食品添加剂 辣椒油树脂 |
China National Standards Cu |
English PDF |
| GB/T 6119-2012 |
Side and face milling Cutter 三面刃铣刀 |
China National Standards Cu |
English PDF |
| GB/T 28247-2012 |
Rotary gear milling Cutters 盘形齿轮铣刀 |
China National Standards Cu |
English PDF |
| GB/T 50746-2012 |
Code for design of petrochemical recirCulation cooling water unit 石油化工循环水场设计规范 |
China National Standards Cu |
English PDF |
| GB/T 27977-2011 |
Test and calCulation methods of electricity efficiency of cement production 水泥生产电能能效测试及计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27683-2011 |
Specifications for recovery of Cutting filings of free-cutting copper alloys 易切削铜合金切削废屑回收规范 |
China National Standards Cu |
English PDF |
| GB/T 27672-2011 |
Copper and copper alloy seamless tube for welding and Cutting 焊割用铜及铜合金无缝管 |
China National Standards Cu |
English PDF |
| GB/T 27613-2011 |
Hydraulic fluid power - Fluid contamination - Determination of partiCulate contamination by the gravimetric method 液压传动 液体污染 采用称重法测定颗粒污染度 |
China National Standards Cu |
English PDF |
| GB/T 27828-2011 |
Chemicals - Test method of in vitro skin corrosion - TransCutaneous electrical resistance test（TER） 化学品 体外皮肤腐蚀 经皮电阻试验方法 |
China National Standards Cu |
English PDF |
| GB/T 27824-2011 |
Chemicals - Test method of aCute inhalation toxicity - Fixed concentration procedure 化学品 急性吸入毒性 固定浓度试验方法 |
China National Standards Cu |
English PDF |
| GB/T 27823-2011 |
Chemicals - Test method of aCute dermal toxicity - Fixed dose procedure 化学品 急性经皮毒性 固定剂量试验方法 |
China National Standards Cu |
English PDF |
| GB/T 27861-2011 |
Chemicals - Fish aCute toxicity test 化学品 鱼类急性毒性试验 |
China National Standards Cu |
English PDF |
| GB/T 27843-2011 |
Chemicals - Determination of the low moleCular weight content of a polymer using Gel permeation chromatography（GPC） 化学品 聚合物低分子量组分含量测定 凝胶渗透色谱法（GPC） |
China National Standards Cu |
English PDF |
| GB 27887-2011 |
Restraining devices for child ocCupants of power-driven vehicles 机动车儿童乘员用约束系统 |
China National Standards Cu |
English PDF |
| GB/T 28158-2011 |
OcCupational classification and qualification management of international trade 国际贸易业务的职业分类与资质管理 |
China National Standards Cu |
English PDF |
| GB/T 27737-2011 |
CalCulation method of energy equilibrium and energy efficiency in oxygen generation station system 制氧站系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27736-2011 |
The general calCulation method of the system energy equilibrium in pulp and paper production process 制浆造纸企业生产过程的系统能量平衡计算方法通则 |
China National Standards Cu |
English PDF |
| GB/T 27732-2011 |
CalCulation method of energy equilibrium and energy efficiency in washing, screening and oxygen delignification system 洗涤筛选、氧脱系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27727-2011 |
CalCulation method of energy equilibrium and energy efficiency in screening and CEHP bleaching system 筛选、CEHP四段漂白系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27724-2011 |
CalCulation method of energy equilibrium and energy efficiency in fourdrinier paper machine system 普通长网造纸机系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27722-2011 |
CalCulation method of energy equilibrium and energy efficiency in the raw material preparation system of wood pulp 木浆备料系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27721-2011 |
CalCulation method of energy equilibrium and energy efficiency in stone ground wood system 磨石磨木浆系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27720-2011 |
CalCulation method of energy equilibrium and energy efficiency in Kamyr continuous cooking system 卡米尔连续蒸煮系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27718-2011 |
CalCulation method of energy equilibrium and energy efficiency in batch cooking (vertical digester) system 间歇蒸煮（立锅）系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27716-2011 |
CalCulation method of energy equilibrium and energy efficiency in horizontal-tube continuous cooking system 横管式连续蒸煮系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27714-2011 |
CalCulation method of energy equilibrium and energy efficiency in deinked pulp(DIP) system 废纸脱墨浆系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27713-2011 |
CalCulation method of energy equilibrium and energy efficiency in alkali recovery combustion system of non-wood pulp 非木浆碱回收燃烧系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27712-2011 |
CalCulation method of energy equilibrium and energy efficiency in multiple effect evaporating system of non-wood pulp 非木浆多效蒸发系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27711-2011 |
CalCulation method of energy equilibrium and energy efficiency in Horizontal Gap paper machine system 叠网造纸机系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27709-2011 |
CalCulation method of energy equilibrium and energy efficiency in four stages bleaching system with chlorine dioxide 带二氧化氯的四段漂白系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27707-2011 |
CalCulation method of energy equilibrium and energy efficiency in the raw material preparation system of straw pulp 草浆备料系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27706-2011 |
CalCulation method of energy equilibrium and energy efficiency of PRC-APMP system PRC-APMP系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 27705-2011 |
CalCulation method of energy equilibrium and energy efficiency in BCTMP system BCTMP系统能量平衡及能量效率计算方法 |
China National Standards Cu |
English PDF |
| GB/T 15157.12-2011 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated cirCuits 频率低于3MHz的印制板连接器 第12部分：集成电路插座的尺寸、一般要求和试验方法详细规范 |
China National Standards Cu |
English PDF |
| GB 27887-2011 |
Restraining devices for child ocCupants of power-driven vehicles 机动车儿童乘员用约束系统 |
China National Standards Cu |
English PDF |
| GB/T 28181-2011 |
SeCurity and protection video monitoring network system technical specification for information transport, switch and control 安全防范视频监控联网系统信息传输、交换、控制技术要求 |
China National Standards Cu |
English PDF |
| GB/T 28106-2011 |
Detection and identification of Curtobacterium flaccumfaciens pv. oortii Collins & Jones 郁金香黄色疱斑病菌检疫鉴定方法 |
China National Standards Cu |
English PDF |
| GB/T 28098-2011 |
Detection and identification of Xylotrechus rustiCus (Linnaeus) 青杨脊虎天牛检疫鉴定方法 |
China National Standards Cu |
English PDF |
| GB/T 28095-2011 |
Detection and identification of Phellinus noxius (Corner) G. Cunn. 木层孔褐根腐病菌检疫鉴定方法 |
China National Standards Cu |
English PDF |
| GB/T 28071-2011 |
Detection and identification of Cucumber green mottle mosaic virus 黄瓜绿斑驳花叶病毒检疫鉴定方法 |
China National Standards Cu |
English PDF |
| Find out:5137Items | To Page of: First -Previous-Next -Last | [22] [23] [24] [25] [26] [27] [28] |
+86-755-25831330
