Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 14352.11-2010 |
Methods for chEMical analysis of tungsten ores and molybdenum ores - Part 11：Determination of bismuth content 钨矿石、钼矿石化学分析方法 第11部分：铋量测定 |
China National Standards EM |
 English PDF |
| GB/T 14352.10-2010 |
Methods for chEMical analysis of tungsten ores and molybdenum ores - Part 10：Determination of arsenic content 钨矿石、钼矿石化学分析方法 第10部分：砷量测定 |
China National Standards EM |
English PDF |
| GB/T 13073-2010 |
Rock samples - Determination of radium - 226 - EManation technique 岩石样品 226Ra的测定 射气法 |
China National Standards EM |
English PDF |
| GB/T 13072-2010 |
Geological water samples - Determination of radioactive ratio 226Ra/228Ra - EManation - β counting techniques 地质水样 226Ra/228Ra 放射性活度比值测定 射气法 - β 法 |
China National Standards EM |
English PDF |
| GB/Z 25458-2010 |
Rules and procedures for conformity testing and certification of wind turbine generator systEM 风力发电机组 合格认证规则及程序 |
China National Standards EM |
English PDF |
| GB/Z 25427-2010 |
Wind turbine generator systEMs - Lightning protection 风力发电机组 雷电防护 |
China National Standards EM |
English PDF |
| GB/Z 25426-2010 |
Wind turbine generator systEMs measurement of mechanical loads 风力发电机组 机械载荷测量 |
China National Standards EM |
English PDF |
| GB/T 14506.27-2010 |
Methods for chEMical analysis of silicate rocks - Part 27: Determination of nickel content 硅酸盐岩石化学分析方法 第27部分：镍量测定 |
China National Standards EM |
English PDF |
| GB 50636-2010 |
Code for design of urban rail transit integrated supervision and control systEM engineering 城市轨道交通综合监控系统工程设计规范 |
China National Standards EM |
English PDF |
| GB 50635-2010 |
Code for design of hall systEM engineering of videoconference 会议电视会场系统工程设计规范 |
China National Standards EM |
English PDF |
| GB 50634-2010 |
Code for design of industrial waste composition in cEMent kiln 水泥窑协同处置工业废物设计规范(2015年版) |
China National Standards EM |
English PDF |
| GB/T 50627-2010 |
Evaluation standard for district heating systEM 城镇供热系统评价标准 |
China National Standards EM |
English PDF |
| GB/T 50609-2010 |
Code for design of plant information systEM in petrochemical engineering 石油化工工厂信息系统设计规范 |
China National Standards EM |
English PDF |
| GB 25468-2010 |
EMission Standard of Pollutants from Mg、Ti Industry 镁、钛工业污染物排放标准 |
China National Standards EM |
English PDF |
| GB 25467-2010 |
EMission Standard of Pollutants from Cu,Ni,Co Industry 铜、镍、钴工业污染物排放标准 |
China National Standards EM |
English PDF |
| GB 25466-2010 |
EMission Standard of Pollutants from Lead and Zink Industry 铅、锌工业污染物排放标准 |
China National Standards EM |
English PDF |
| GB 25465-2010 |
EMission Standard of Pollutants from Aluminium Industry 铝工业污染物排放标准 |
China National Standards EM |
English PDF |
| GB/T 25279-2010 |
Hollow fiber flat-plat mEMbrane module 中空纤维帘式膜组件 |
China National Standards EM |
English PDF |
| GB/T 25268-2010 |
Rubber - Guide to the use of curEMeters 橡胶 硫化仪使用指南 |
China National Standards EM |
English PDF |
| GB/T 25256-2010 |
Optical functional films - Release film - The measurEMent of peeling force at 180°angle and subsequent adhesion 光学功能薄膜 离型膜 180°剥离力和残余黏着率测试方法 |
China National Standards EM |
English PDF |
| GB/T 25189-2010 |
Microbeam analysis - Determination method for quantitative analysis parameters of SEM-EDS 微束分析 扫描电镜能谱仪定量分析参数的测定方法 |
China National Standards EM |
English PDF |
| GB/T 25188-2010 |
Thickness measurEMents for ultrathin silicon oxide layers on silicon wafers X-ray photoelectron spectroscopy 硅晶片表面超薄氧化硅层厚度的测量 X射线光电子能谱法 |
China National Standards EM |
English PDF |
| GB/T 25187-2010 |
Surface chEMical analysis - Auger electron spectroscopy - Description of selected instrumental performance parameters 表面化学分析 俄歇电子能谱 - 选择仪器性能参数的表述 |
China National Standards EM |
English PDF |
| GB/T 25186-2010 |
Surface chEMical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials 表面化学分析 二次离子质谱 - 由离子注入参考物质确定相对灵敏度因子 |
China National Standards EM |
English PDF |
| GB/T 25185-2010 |
Surface chEMical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction 表面化学分析 X射线光电子能谱 - 荷电控制和荷电校正方法的报告 |
China National Standards EM |
English PDF |
| GB/T 25180-2010 |
Technical requirEMents for integrated treatment and resource utilization of municipal solid waste 生活垃圾综合处理与资源利用技术要求 |
China National Standards EM |
English PDF |
| GB/T 25179-2010 |
Technical requirEMents for site utilization after stabilization in municipal solid waste landfill 生活垃圾填埋场稳定化场地利用技术要求 |
China National Standards EM |
English PDF |
| GB/T 25175-2010 |
Technical requirEMents for collection and recycling of bulky waste 大件垃圾收集和利用技术要求 |
China National Standards EM |
English PDF |
| GB 9774-2010 |
Sacks for packing cEMent 水泥包装袋 |
China National Standards EM |
English PDF |
| GB 25131-2010 |
Safety requirEMents for water chillers (heat pump) using the vapor compression cycle 蒸气压缩循环冷水（热泵）机组 安全要求 |
China National Standards EM |
English PDF |
| GB 25130-2010 |
Safety requirEMents for unitary air-Conditioners 单元式空气调节机 安全要求 |
China National Standards EM |
English PDF |
| GB 16999-2010 |
Universal technical requirEMents of RMB - Banknote discriminating device 人民币鉴别仪通用技术条件 |
China National Standards EM |
English PDF |
| GB/T 325.3-2010 |
Packaging container - Steel drums - Part 3：Non-rEMovable head (tight head) drums with a minimum total capacity of 212l, 216.5l and 230l 包装容器 钢桶 第3部分：最小总容量212L、216.5L和230L闭口钢桶 |
China National Standards EM |
English PDF |
| GB/T 325.2-2010 |
Packaging container - Steel drums - Part 2：REMovable head (open head) drums with a minimum total capacity of 208l, 210l and 216.5l 包装容器 钢桶 第2部分：最小总容量208L、210L和216.5L全开口钢桶 |
China National Standards EM |
English PDF |
| GB/T 25171-2010 |
Animal waste managEMent terminology 畜禽养殖废弃物管理术语 |
China National Standards EM |
English PDF |
| GB/T 25163-2010 |
Child-resistant packaging - RequirEMents and testing procedures for reclosable packages 防止儿童开启包装 可重新盖紧包装的要求与试验方法 |
China National Standards EM |
English PDF |
| GB/T 25153-2010 |
ChEMical industry pressure vessel used magnetic-float type level gauge 化工压力容器用磁浮子液位计 |
China National Standards EM |
English PDF |
| GB/T 25150-2010 |
Quality test method of passive film on austenitic stainless steel of chEMical cleaning for industrial equipment - Blue dot method 工业设备化学清洗中奥氏体不锈钢钝化膜质量的测试方法 蓝点法 |
China National Standards EM |
English PDF |
| GB/T 25149-2010 |
Quality test method of passive film on carbon steel of chEMical cleaning for industrial equipment - Red dot method 工业设备化学清洗中碳钢钝化膜质量的测试方法 红点法 |
China National Standards EM |
English PDF |
| GB/T 25148-2010 |
Test methods of scale rEMoval rate and detergence rate of chemical cleaning for industrial equipment 工业设备化学清洗中除垢率和洗净率测试方法 |
China National Standards EM |
English PDF |
| GB/T 25147-2010 |
Test method of metal corrosion amount and corrosion rate of chEMical cleaning for industrial equipment - Gravimetric method 工业设备化学清洗中金属腐蚀率及腐蚀总量的测试方法 重量法 |
China National Standards EM |
English PDF |
| GB/T 25146-2010 |
Quality acceptance specifications of chEMical cleaning for industrial equipment 工业设备化学清洗质量验收规范 |
China National Standards EM |
English PDF |
| GB/T 25229-2010 |
Grain and oils storage － RequirEMent of airtightness of warehouse 粮油储藏 平房仓气密性要求 |
China National Standards EM |
English PDF |
| GB/T 25227-2010 |
Technical code for field detective devices for the equipments in grain processing and storage systEM 粮食加工、储运设备现场监测装置技术规范 |
China National Standards EM |
English PDF |
| GB/T 15269.1-2010 |
Cigars - Part 1: Technical requirEMents for classification and sampling 雪茄烟 第1部分：产品分类和抽样技术要求 |
China National Standards EM |
English PDF |
| GB 5135.16-2010 |
Automatic sprinkler systEM - Part 16：Flexible sprinkler hose with fittings 自动喷水灭火系统 第16部分：消防洒水软管 |
China National Standards EM |
English PDF |
| GB 25204-2010 |
Auto tracking and targeting jet suppression systEM 自动跟踪定位射流灭火系统 |
China National Standards EM |
English PDF |
| GB 25201-2010 |
Maintenance managEMent for building fire equipments 建筑消防设施的维护管理 |
China National Standards EM |
English PDF |
| GB 16669-2010 |
General technical specifications for components of carbon dioxide fire extinguishing systEMs 二氧化碳灭火系统及部件通用技术条件 |
China National Standards EM |
English PDF |
| GB 16668-2010 |
General technical specifications for powder extinguishing systEM and components 干粉灭火系统及部件通用技术条件 |
China National Standards EM |
English PDF |
| GB/T 7143-2010 |
Methods for chEMical analysis of silica sand for foundry 铸造用硅砂化学分析方法 |
China National Standards EM |
English PDF |
| GB/T 5135.20-2010 |
Automatic sprinkler systEM - Part 20: Coating steel pipe 自动喷水灭火系统 第20部分: 涂覆钢管 |
China National Standards EM |
English PDF |
| GB/T 5135.19-2010 |
Automatic sprinkler systEM - Part 19: Plastic pipe and fittings 自动喷水灭火系统 第19部分：塑料管道及管件 |
China National Standards EM |
English PDF |
| GB/T 480-2010 |
Test of low tEMperature distillation of coal by aluminum retort 煤的铝甑低温干馏试验方法 |
China National Standards EM |
English PDF |
| GB/T 25208-2010 |
Environmental test methods for fixed extinguishing systEMs 固定灭火系统产品环境试验方法 |
China National Standards EM |
English PDF |
| GB/T 25206.2-2010 |
Reaction-to-fire tests for sandwich panel building systEMs - Part 2: Test method for large rooms 复合夹芯板建筑体燃烧性能试验 第2部分：大室法 |
China National Standards EM |
English PDF |
| GB/T 25134-2010 |
Optical measurEMent specification of 3D geometry for forgings/stampings and the dies 锻压制件及其模具三维几何量光学检测规范 |
China National Standards EM |
English PDF |
| GB/T 25133-2010 |
Hydraulic fluid power systEMs - Assembled systems - Methods of cleaning lines by flushing 液压系统总成 管路冲洗方法 |
China National Standards EM |
English PDF |
| GB/T 25127.2-2010 |
Low ambient tEMperature air source heat pump ( water chilling ) packages - Part2： Heat pump ( water chilling ) packages for household and similar application 低环境温度空气源热泵（冷水）机组 第2部分：户用及类似用途的热泵（冷水）机组 |
China National Standards EM |
English PDF |
| GB/T 25127.1-2010 |
Low ambient tEMperature air source heat pump（water chilling）packages - Part 1：Heat pump (water chilling) packages for industrial & commercial and similar application 低环境温度空气源热泵（冷水）机组 第1部分：工业或商业用及类似用途的热泵（冷水）机组 |
China National Standards EM |
English PDF |
| GB/T 18443.8-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 8: Volume measurEMent 真空绝热深冷设备性能试验方法 第8部分：容积测量 |
China National Standards EM |
English PDF |
| GB/T 18443.7-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 7: Holding time measurEMent 真空绝热深冷设备性能试验方法 第7部分：维持时间测量 |
China National Standards EM |
English PDF |
| GB/T 18443.6-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 6: Heat-leak rate measurEMent 真空绝热深冷设备性能试验方法 第6部分：漏热量测量 |
China National Standards EM |
English PDF |
| GB/T 18443.5-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 5: Static evaporation rate measurEMent 真空绝热深冷设备性能试验方法 第5部分：静态蒸发率测量 |
China National Standards EM |
English PDF |
| GB/T 18443.4-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 4: Leak-outgassing rate measurEMent 真空绝热深冷设备性能试验方法 第4部分：漏放气速率测量 |
China National Standards EM |
English PDF |
| GB/T 18443.3-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 3: Leak rate measurEMent 真空绝热深冷设备性能试验方法 第3部分：漏率测量 |
China National Standards EM |
English PDF |
| GB/T 18443.2-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 2：Vacuum degree measurEMent 真空绝热深冷设备性能试验方法 第2部分：真空度测量 |
China National Standards EM |
English PDF |
| GB/T 18443.1-2010 |
Testing method of performance for vacuum insulation cryogenic equipment - Part 1: Basic requirEMents 真空绝热深冷设备性能试验方法 第1部分：基本要求 |
China National Standards EM |
English PDF |
| GB/T 16553-2010 |
GEMs - Testing 珠宝玉石 鉴定 |
China National Standards EM |
English PDF |
| GB/T 16552-2010 |
GEMs - Nomenclature 珠宝玉石 名称 |
China National Standards EM |
English PDF |
| GB/T 13930-2010 |
Methods for the measurEMent of volume flow of gas of water-ring vacuum pumps and compressors 水环真空泵和水环压缩机 气量测定方法 |
China National Standards EM |
English PDF |
| GB/T 25241.1-2010 |
Rules for tobacco intensive seedling production - Part 1: Seedling with float systEM 烟草集约化育苗技术规程 第1部分：漂浮育苗 |
China National Standards EM |
English PDF |
| GB/T 25172-2010 |
Technical specification for production and preservation of fresh boar sEMen 猪常温精液生产与保存技术规范 |
China National Standards EM |
English PDF |
| GB 19083-2010E |
Technical requirEMents for protective face mask for medical use 医用防护口罩技术要求（英文版） |
China National Standards EM |
English PDF |
| GB 25081-2010 |
High-voltage presence indicating systEMs 高压带电显示装置（VPIS） |
China National Standards EM |
English PDF |
| GB 20840.1-2010 |
Instrument transformers - Part 1: General requirEMents 互感器 第1部分：通用技术要求 |
China National Standards EM |
English PDF |
| GB 19083-2010 |
Technical requirEMents for protective face mask for medical use 医用防护口罩技术要求 |
China National Standards EM |
English PDF |
| GB 23101.3-2010 |
Implants for surgery - Hydroxyapatite - Part 3: ChEMical analysis and characterization of crystallinity and phase purity 外科植入物 羟基磷灰石 第3部分：结晶度和相纯度的化学分析和表征 |
China National Standards EM |
English PDF |
| GB 11032-2010 |
Metal-oxide surge arresters without gaps for a.c. systEMs 交流无间隙金属氧化物避雷器 |
China National Standards EM |
English PDF |
| GB 25116-2010 |
Safety requirEMents for industrial laundry machinery - Dry-cleaning machines using perchloroethylene 工业洗涤机械的安全要求 四氯乙烯干洗机 |
China National Standards EM |
English PDF |
| GB 25115.6-2010 |
Safety requirEMents for industrial laundry machinery - Part 6: Ironing and fusing presses 工业洗涤机械的安全要求 第6部分：整烫机和粘合机 |
China National Standards EM |
English PDF |
| GB 25115.5-2010 |
Safety requirEMents for industrial laundry machinery - Part 5: Flatwork ironers,feeders and folders 工业洗涤机械的安全要求 第5部分：熨平机、送料机和折叠机 |
China National Standards EM |
English PDF |
| GB 25115.4-2010 |
Safety requirEMents for industrial laundry machinery - Part 4: Air dryers 工业洗涤机械的安全要求 第4部分：烘干机 |
China National Standards EM |
English PDF |
| GB 25115.3-2010 |
Safety requirEMents for industrial laundry machinery - Part 3: Washing tunnel lines including component machines 工业洗涤机械的安全要求 第3部分：隧道式洗涤机组和相关机械 |
China National Standards EM |
English PDF |
| GB 25115.2-2010 |
Safety requirEMents for industrial laundry machinery - Part 2: Washing machines and washer-extractors 工业洗涤机械的安全要求 第2部分：洗衣机和洗脱机 |
China National Standards EM |
English PDF |
| GB 25115.1-2010 |
Safety requirEMents for industrial laundry machinery - Part 1: Commom requirements 工业洗涤机械的安全要求 第1部分：通用要求 |
China National Standards EM |
English PDF |
| GB 25029-2010 |
Steel slag cEMent for road 钢渣道路水泥 |
China National Standards EM |
English PDF |
| GB/T 25043-2010 |
Multiaxial warp-knitted reinforcEMent for resin-matrix prepreg 连续树脂基预浸料用多轴向经编增强材料 |
China National Standards EM |
English PDF |
| GB/T 25042-2010 |
Fiberglass fabric for architectural mEMbrane 玻璃纤维建筑膜材 |
China National Standards EM |
English PDF |
| GB/T 16537-2010 |
ChEMical analysis methods of fritted glaze for ceramics 陶瓷熔块釉化学分析方法 |
China National Standards EM |
English PDF |
| GB 25113-2010 |
General technical requirEMent for mobile fire command center 移动消防指挥中心通用技术要求 |
China National Standards EM |
English PDF |
| GB 17945-2010 |
Fire EMergency lighting and evacuate indicating system 消防应急照明和疏散指示系统 |
China National Standards EM |
English PDF |
| GB 16281-2010 |
Fire alarm receiving and dispatching systEM 火警受理系统 |
China National Standards EM |
English PDF |
| GB/T 25102.4-2010 |
Electroacoustics - Hearing aids - Part 4: Induction loop systEMs for hearing aid purposes - Magnetic field strength 电声学 助听器 第4部分：助听器用感应回路系统磁场强度 |
China National Standards EM |
English PDF |
| GB/T 25102.13-2010 |
Electroacoustics - Hearing aids - Part13: Electromagnetic compatibility (EMC) 电声学 助听器 第13部分：电磁兼容（EMC) |
China National Standards EM |
English PDF |
| GB/T 25102.100-2010 |
Electroacoustics - Hearing aids - Part 0：MeasurEMent of electroacoustical characteristics 电声学 助听器 第0部分：电声特性的测量 |
China National Standards EM |
English PDF |
| GB/T 25079-2010 |
Acoustics - Application of new measurEMent methods in building and room acoustics - MLS and SS methods 声学 建筑声学和室内声学中新测量方法的应用 MLS和SS方法 |
China National Standards EM |
English PDF |
| GB/T 19889.14-2010 |
Acoustics - MeasurEMent of sound insulation in buildings and of building elements - Part 14: Guidelines for special situations in the field 声学 建筑和建筑构件隔声测量 第14部分：特殊现场测量导则 |
China National Standards EM |
English PDF |
| GB/T 7357-2010 |
Electrical installations in ships - SystEM design - Protection 船舶电气设备 系统设计 保护 |
China National Standards EM |
English PDF |
| GB/T 25117.3-2010 |
Railway applications - Rolling stock - Combined testing - Part 3: Combined testing of alternating current motors,fed by an indirect converter,and their control systEM 轨道交通 机车车辆 组合试验 第3部分：间接变流器供电的交流电动机及其控制系统的组合试验 |
China National Standards EM |
English PDF |
| Find out:16399Items | To Page of: First -Previous-Next -Last | [101] [102] [103] [104] [105] [106] [107] |
+86-755-25831330
