Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 32371.4-2015 |
Short term method for measuring the EMission properties of low-solvent or solvent-free adhesives after application—Part 4: Determination of volatile diisocyanates 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第4部分：挥发性二异氰酸酯的测定 |
China National Standards EM |
 English PDF |
| GB/T 32371.3-2015 |
Short term method for measuring the EMission prorerties of low-solvent or solvent-free adhesives after application—Part 3: Determination of volatile aldehydes 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第3部分：挥发性醛类化合物的测定 |
China National Standards EM |
English PDF |
| GB/T 32371.2-2015 |
Short term method for measuring the EMission prorerties of low-solvent or solvent-free adhesives after application—Part 2: Determination of volatile organic compound 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第2部分：挥发性有机化合物的测定 |
China National Standards EM |
English PDF |
| GB/T 32371.1-2015 |
Short term method for measuring the EMission prorerties of low-solvent or solvent-free adhesives after application—Part 1: General procedure 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第1部分：通则 |
China National Standards EM |
English PDF |
| GB/T 32368-2015 |
MeasurEMent of resistance to elevated temperature and humidity for adhesive tapes 胶粘带耐高温高湿老化的试验方法 |
China National Standards EM |
English PDF |
| GB/T 32353-2015 |
Interface specifications of real-time dynamic monitoring systEM for power systems 电力系统实时动态监测系统数据接口规范 |
China National Standards EM |
English PDF |
| GB/T 32352-2015 |
Standard of acceptance for wind turbine generator systEMs used on plateau 高原用风力发电机组现场验收规范 |
China National Standards EM |
English PDF |
| GB/T 32350.1-2015 |
Railway applications—Insulation coordination—Part 1: Basic requirEMents—Clearances and creepage distances for all electrical and electronic equipment 轨道交通 绝缘配合 第1部分：基本要求 电工电子设备的电气间隙和爬电距离 |
China National Standards EM |
English PDF |
| GB/T 32348.2-2015 |
Electrical resistance trace heating systEMs for industrial and commercial applications—Part 2: Application guide for system design, installation and maintenance 工业和商业用电阻式伴热系统 第2部分：系统设计安装和维护应用指南 |
China National Standards EM |
English PDF |
| GB/T 32348.1-2015 |
Electrical resistance trace heating systEMs for industrial and commercial applications — Part 1: General and testing requirements 工业和商业用电阻式伴热系统 第1部分：通用和试验要求 |
China National Standards EM |
English PDF |
| GB/T 32346.1-2015 |
Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 1: Test methods and requirEMents 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第1部分：试验方法和要求 |
China National Standards EM |
English PDF |
| GB/T 32343-2015 |
Technical specification of natural secondary forest improvEMent and cultivation in northeast China 东北地区天然次生林改培技术规程 |
China National Standards EM |
English PDF |
| GB/T 32331-2015 |
Conveyor belts with a textile carcass—Total belt thickness and thickness of constitutive elEMents—Test methods 织物芯输送带 带总厚度和各层厚度 试验方法 |
China National Standards EM |
English PDF |
| GB/T 32308-2015 |
RequirEMents for post-mission disposal of GEO satellites GEO卫星任务后处置要求 |
China National Standards EM |
English PDF |
| GB/T 32306-2015 |
General requirEMents of space experiments for space system 航天系统空间实验通用要求 |
China National Standards EM |
English PDF |
| GB/T 32305-2015 |
RequirEMents for space product assurance 航天产品保证 |
China National Standards EM |
English PDF |
| GB/T 32304-2015 |
Electrostatic discharge protection requirEMents for aerospace electronic products 航天电子产品静电防护要求 |
China National Standards EM |
English PDF |
| GB/T 32303-2015 |
RequitEMents for structure fracture and damage control for space systems 航天结构断裂与损伤控制要求 |
China National Standards EM |
English PDF |
| GB/T 32302-2015 |
Interface requirEMents of launch vehicle and spacecraft 运载火箭与航天器接口要求 |
China National Standards EM |
English PDF |
| GB/T 32301-2015 |
General requirEMents of package & transportation for spacecraft 航天器包装、运输通用要求 |
China National Standards EM |
English PDF |
| GB/T 32300-2015 |
Best practices for orbit elEMents at payload-launch vehicle separation 运载火箭和有效载荷分离点轨道要素计算最佳实践 |
China National Standards EM |
English PDF |
| GB/T 32299-2015 |
Space project risk managEMent 航天项目风险管理 |
China National Standards EM |
English PDF |
| GB/T 32298-2015 |
Matching test requirEMents for spacecraft and launch vehicle 航天器与运载火箭匹配试验要求 |
China National Standards EM |
English PDF |
| GB/T 32297-2015 |
Simulation requirEMents for space control system 航天控制系统仿真要求 |
China National Standards EM |
English PDF |
| GB/T 32295-2015 |
Design requirEMents for residual propellant venting of launch vehicle 运载火箭剩余推进剂排放设计要求 |
China National Standards EM |
English PDF |
| GB/T 28267.3-2015 |
Steel cord conveyor belts—Part 3: Special safety requirEMents for belts for use in underground installations 钢丝绳芯输送带 第3部分：井下用输送带的特殊安全要求 |
China National Standards EM |
English PDF |
| GB/T 23718.4-2015 |
Condition monitoring and diagnostics of machines—RequirEMents for qualification and assessment of personnel—Part 4: Field lubricant analysis 机器状态监测与诊断 人员资格与人员评估的要求 第4部分：现场润滑剂分析 |
China National Standards EM |
English PDF |
| GB/T 21562.3-2015 |
Railway applications—Specification and dEMonstration of reliability, availability, maintainability and safety (RAMS)—Part 3：Guide to the application for rolling stock RAM 轨道交通 可靠性、可用性、可维修性和安全性规范及示例 第3部分：机车车辆RAM的应用指南 |
China National Standards EM |
English PDF |
| GB/T 21562.2-2015 |
Railway applications—Specification and dEMonstration of reliability,availability,maintainability and safety(RAMS)—Part 2: Guide to the application for safety 轨道交通 可靠性、可用性、可维护性和安全性规范及示例 第2部分：安全性的应用指南 |
China National Standards EM |
English PDF |
| GB/T 21283.6-2015 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elEMents—Part 6: Properties requirements for the thermoplastic and elastic material 密封元件为热塑性材料的旋转轴唇形密封圈 第6部分：热塑性材料与弹性体包覆材料的性能要求 |
China National Standards EM |
English PDF |
| GB/T 18853-2015 |
Hydraulic fluid power filters—Multi-pass method for evaluating filtration performance of a filter elEMent 液压传动过滤器 评定滤芯过滤性能的多次通过方法 |
China National Standards EM |
English PDF |
| GB/T 18290.5-2015 |
Solderless connections—Part 5: Press-in connections—General requirEMents, test methods and practical guidance 无焊连接 第5部分：压入式连接 一般要求、试验方法和使用导则 |
China National Standards EM |
English PDF |
| GB/T 18290.4-2015 |
Solderless connections— Part 4: Solderless non-accessible insulation displacEMent connections— General requirements, test methods and practical guidance 无焊连接 第4部分：不可接触无焊绝缘位移连接 一般要求、试验方法和使用导则 |
China National Standards EM |
English PDF |
| GB/T 18290.2-2015 |
Solderless connections— Part 2：Crimped connections—General requirEMents,test methods and practical guidance 无焊连接 第2部分：压接连接 一般要求、试验方法和使用导则 |
China National Standards EM |
English PDF |
| GB/T 16680-2015 |
SystEMs and software engineering—Requirements for managers of user documentation 系统与软件工程 用户文档的管理者要求 |
China National Standards EM |
English PDF |
| GB/T 13824-2015 |
Mechanical vibration of rotating and reciprocating machinery—RequirEMents for instruments for measuring vibration severity 旋转与往复式机器的机械振动 对振动烈度测量仪的要求 |
China National Standards EM |
English PDF |
| GB/T 11348.4-2015 |
Mechanical vibration—Evaluation of machine vibration by measurEMents on rotating shafts—Part 4: Gas turbine sets with fluid-film bearings 机械振动 在旋转轴上测量评价机器的振动 第4部分：具有滑动轴承的燃气轮机组 |
China National Standards EM |
English PDF |
| GB/T 11297.10-2015 |
Test method for Curie tEMperature of pyroelectric materials 热释电材料居里温度Tc的测试方法 |
China National Standards EM |
English PDF |
| GB 32460-2015 |
Fire EMergency rescue equipments—General technical specification for forcible entry tools 消防应急救援装备 破拆机具通用技术条件 |
China National Standards EM |
English PDF |
| GB 32459-2015 |
Fire EMergency rescue equipments—General technical specification for manual rescue tools 消防应急救援装备 手动破拆工具通用技术条件 |
China National Standards EM |
English PDF |
| GB/T 13277.3-2015 |
Compressed air—Part 3: Test methods for measurEMent of humidity 压缩空气 第3部分：湿度测量方法 |
China National Standards EM |
English PDF |
| GB/T 3766-2015 |
Hydraulic fluid power—General rules and safety requirEMents for systems and their components 液压传动 系统及其元件的通用规则和安全要求 |
China National Standards EM |
English PDF |
| GB/T 32373-2015 |
Test methods for reverse osmosis mEMbranes 反渗透膜测试方法 |
China National Standards EM |
English PDF |
| GB/T 32363.1-2015 |
Plastics—Polyamide (PA) moulding and extrusion materials—Part 1: Designation systEM and basis for specification 塑料 聚酰胺模塑和挤出材料 第1部分：命名系统和规范基础 |
China National Standards EM |
English PDF |
| GB/T 32234.8-2015 |
Personal flotation devices—Part 8: Accessories—Safety requirEMents and test methods 个人浮力设备 第8部分：附件 安全要求和试验方法 |
China National Standards EM |
English PDF |
| GB/T 32361-2015 |
Test methods for pore size properties of mEMbrane filters—Bubble point and mean flow pore test 分离膜孔径测试方法 泡点和平均流量法 |
China National Standards EM |
English PDF |
| GB/T 32360-2015 |
Test methods for ultrafiltration mEMbranes 超滤膜测试方法 |
China National Standards EM |
English PDF |
| GB/Z 32332.2-2015 |
Rolling bearings—Explanatory notes on ISO 281—Part 2: Modified rating life calculation, based on a systEMs approach to fatigue stresses 滚动轴承 对ISO 281的注释 第2部分：基于疲劳应力系统方法的修正额定寿命计算 |
China National Standards EM |
English PDF |
| GB/T 32365-2015 |
Silicone rubber compound—Classification and systEM nomenclature 硅橡胶混炼胶 分类与系统命名法 |
China National Standards EM |
English PDF |
| GB/T 32324-2015 |
Rolling bearings—Methods for the measurEMent and assessment of departure from roundness and waviness 滚动轴承 圆度和波纹度误差测量及评定方法 |
China National Standards EM |
English PDF |
| GB/T 32321-2015 |
Rolling bearings—Sealed deep groove ball bearings— Performance test rule of dustproofing,grease leakage and tEMperature rise 滚动轴承 密封深沟球轴承 防尘、漏脂及温升性能试验规程 |
China National Standards EM |
English PDF |
| GB/T 20056-2015 |
Rolling bearings—Radial needle roller and cage assEMblies—Boundary dimensions and tolerances 滚动轴承 向心滚针和保持架组件 外形尺寸和公差 |
China National Standards EM |
English PDF |
| GB/T 19286-2015 |
Electromagnetic compatibility requirEMent and measurement methods for telecommunication network equipment 电信网络设备的电磁兼容性要求及测量方法 |
China National Standards EM |
English PDF |
| GB/T 32407-2015 |
Technical requirEMents of M2M communication module for logistic informatization service in mobile network 移动通信网面向物流信息服务的M2M通信模块技术要求 |
China National Standards EM |
English PDF |
| GB/T 32406-2015 |
Technical requirEMents of M2M platform for logistic information service in mobile network 移动通信网面向物流信息服务的M2M平台技术要求 |
China National Standards EM |
English PDF |
| GB/T 32320-2015 |
The basic requirEMents of bank branches services 银行营业网点服务基本要求 |
China National Standards EM |
English PDF |
| GB/T 32315-2015 |
Basic requirEMents for bank industry customer service center 银行业客户服务中心基本要求 |
China National Standards EM |
English PDF |
| GB/T 32314-2015 |
ManagEMent specification for customer service center outsourcing service of commercial banks 商业银行客户服务中心服务外包管理规范 |
China National Standards EM |
English PDF |
| GB/T 27930-2015 |
Communication protocols between off-board conductive charger and battery managEMent system for electric vehicle 电动汽车非车载传导式充电机与电池管理系统之间的通信协议 |
China National Standards EM |
English PDF |
| GB/T 20234.1-2015 |
Connection set of conductive charging for electric vehicles—Part 1: General requirEMents 电动汽车传导充电用连接装置 第1部分：通用要求 |
China National Standards EM |
English PDF |
| GB/T 18487.1-2015 |
Electric vehicle conductive charging systEM—Part 1: General requirements 电动汽车传导充电系统 第1部分：通用要求 |
China National Standards EM |
English PDF |
| GB/T 20013.3-2015 |
Nuclear medicine instrumentation—Routine tests—Part 3: Positron EMission tomographs 核医学仪器 例行试验 第3部分：正电子发射断层成像装置 |
China National Standards EM |
English PDF |
| GB/T 18987-2015 |
Radiotherapy equipment—Coordinates, movEMents and scales 放射治疗设备 坐标、运动与刻度 |
China National Standards EM |
English PDF |
| GB 9706.16-2015 |
Medical electrical equipment—Part 2: Particular requirEMents for the safety of radiotherapy simulators 医用电气设备 第2部分：放射治疗模拟机安全专用要求 |
China National Standards EM |
English PDF |
| GB 16174.2-2015 |
Implants for surgery—Active implantable medical devices—Part 2: Cardiac pacEMakers 手术植入物 有源植入式医疗器械 第2部分：心脏起搏器 |
China National Standards EM |
English PDF |
| GB 16174.1-2015 |
Implants for surgery—Active implantable medical devices—Part 1: General requirEMents for safety, marking and for information to be provided by the manufacturer 手术植入物 有源植入式医疗器械 第1部分：安全、标记和制造商所提供信息的通用要求 |
China National Standards EM |
English PDF |
| GB/T 5069-2015 |
ChEMical analysis of magnesia-alumina refractories 镁铝系耐火材料化学分析方法 |
China National Standards EM |
English PDF |
| GB/T 32262-2015 |
Preparation of deoxyribonucleic acid sample for atomic force microscope measurEMent 用于原子力显微镜检测的脱氧核糖核酸样品的制备方法 |
China National Standards EM |
English PDF |
| GB/T 32218-2015 |
Vacuum technology—Test methods for leak rates of vacuum systEM 真空技术 真空系统漏率测试方法 |
China National Standards EM |
English PDF |
| GB/T 32179-2015 |
ChEMical analysis of refractories—General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES) methods 耐火材料化学分析 湿法、原子吸收光谱法（AAS）和电感耦合等离子体原子发射光谱法（ICP-AES）的一般要求 |
China National Standards EM |
English PDF |
| GB/T 26153.3-2015 |
Flexible manufacturing systEM of off-line programming robots—Part 3: Spraying system 离线编程式机器人柔性加工系统 第3部分：喷涂系统 |
China National Standards EM |
English PDF |
| GB/T 25753.4-2015 |
Vacuum technology—Roots vacuum pump— MeasurEMent of performance characteristics—Part 4: Measurement of noise 真空技术 罗茨真空泵性能测量方法 第4部分：噪声的测量 |
China National Standards EM |
English PDF |
| GB/T 1962.1-2015 |
Conical fittings with a 6%(Luer) taper for syringes,needles and certain other medical equipment—Part 1: General requirEMent 注射器、注射针及其他医疗器械6%（鲁尔）圆锥接头 第1部分：通用要求 |
China National Standards EM |
English PDF |
| GB/T 13871.5-2015 |
Rotary shaft lip-type seals incorporating elastomeric sealing elEMents—Part 5: Identification of visual imperfections 密封元件为弹性体材料的旋转轴唇形密封圈 第5部分: 外观缺陷的识别 |
China National Standards EM |
English PDF |
| GB/T 13871.2-2015 |
Rotary shaft lip-type seals incorporating elastomerice sealing elEMents—Part 2: Vocabulary 密封元件为弹性体材料的旋转轴唇形密封圈 第2部分：词汇 |
China National Standards EM |
English PDF |
| GB 32311-2015 |
Minimum allowable values of energy efficiency and energy efficiency grades for hydrogen producing systEMs by water electrolysis 水电解制氢系统能效限定值及能效等级 |
China National Standards EM |
English PDF |
| GB 32284-2015 |
Minimum allowable values of energy efficiency and energy efficiency grades for petrochEMical centrifugal pumps 石油化工离心泵能效限定值及能效等级 |
China National Standards EM |
English PDF |
| GB 18282.5-2015 |
Sterilization of health care products—ChEMical indicators—Part 5：Class 2 indicators for Bowie and Dick-type air removal tests 医疗保健产品灭菌 化学指示物 第5部分：用于BD类空气排除测试的二类指示物 |
China National Standards EM |
English PDF |
| GB 18282.1-2015 |
Sterilization of health care products—ChEMical indicator—Part 1: General requirements 医疗保健产品灭菌 化学指示物 第1部分：通则 |
China National Standards EM |
English PDF |
| GB 18281.5-2015 |
Sterilization of health care products—Biological indicator—Part 5: Biological indicators for low-tEMperature steam and formaldehyde sterilization processes 医疗保健产品灭菌 生物指示物 第5部分：低温蒸汽甲醛灭菌用生物指示物 |
China National Standards EM |
English PDF |
| GB 18281.1-2015 |
Sterilization of health care products—Biological indicators—Part 1: General requirEMents 医疗保健产品灭菌 生物指示物 第1部分：通则 |
China National Standards EM |
English PDF |
| GB 18279.1-2015 |
Sterilization of health care products—Ethylene oxide—Part 1: RequirEMents for development,validation and routine control of a sterilization process for medical devices 医疗保健产品灭菌 环氧乙烷 第1部分：医疗器械灭菌过程的开发、确认和常规控制的要求 |
China National Standards EM |
English PDF |
| GB 18278.1-2015 |
Sterilization of health care products—Moist heat—Part 1: RequirEMents for the development, validation and routine control of a sterilization process for medical devices 医疗保健产品灭菌 湿热 第1部分：医疗器械灭菌过程的开发、确认和常规控制要求 |
China National Standards EM |
English PDF |
| GB/T 32223-2015 |
Building hardware for windows and doors—General requirEMents 建筑门窗五金件 通用要求 |
China National Standards EM |
English PDF |
| GB/T 32310-2015 |
Sterilization of health care products—ChEMical indicators—Guidance for selection,use and interpretion of results 医疗保健产品灭菌 化学指示物 选择、使用和结果判断指南 |
China National Standards EM |
English PDF |
| GB/T 32309-2015 |
Hydrogen peroxide low tEMperature plasma sterilizer 过氧化氢低温等离子体灭菌器 |
China National Standards EM |
English PDF |
| GB/T 19633.2-2015 |
Packaging for terminally sterilized medical devices—Part 2: Validation requirEMents for forming, sealing and assembly processes 最终灭菌医疗器械包装 第2部分：成形、密封和装配过程的确认的要求 |
China National Standards EM |
English PDF |
| GB/T 19633.1-2015 |
Packaging for terminally sterilized medical devices—Part 1: RequirEMents for materials, sterile barrier systems and packaging systems 最终灭菌医疗器械包装 第1部分：材料、无菌屏障系统和包装系统的要求 |
China National Standards EM |
English PDF |
| GB/T 14232.2-2015 |
Plastics collapsible containers for human blood and blood components—Part 2: Blood bag systEMs with integrated features 人体血液及血液成分袋式塑料容器 第2部分：用于标签和使用说明书的图形符号 |
China National Standards EM |
English PDF |
| GB/T 32213-2015 |
Information security technology—Public key infrastructure—Specifications for rEMote password authentication and key establishment 信息安全技术 公钥基础设施 远程口令鉴别与密钥建立规范 |
China National Standards EM |
English PDF |
| GB/T 30269.1-2015 |
Information technology—Sensor networks—Part 1：Reference architecture and general technical requirEMents 信息技术 传感器网络 第1部分：参考体系结构和通用技术要求 |
China National Standards EM |
English PDF |
| GB/T 17969.1-2015 |
Information technology—Open systEMs interconnection—Procedures for the operation of OSI registration authorities—Part 1: General procedures and top arcs of the International Object Identifier tree 信息技术 开放系统互连 OSI登记机构的操作规程 第1部分：一般规程和国际对象标识符树的顶级弧 |
China National Standards EM |
English PDF |
| GB/T 16263.5-2015 |
Information technology—ASN.1 Encoding rules—Part 5: Mapping W3C XML schEMa definitions into ASN.1 信息技术 ASN.1编码规则 第5部分：W3C XML模式定义到ASN.1的映射 |
China National Standards EM |
English PDF |
| GB/Z 32235-2015 |
Industrial-process measurEMent, control and automation—Reference model for representation of production facilities (digital factory) 工业过程测量、控制和自动化 生产设施表示用参考模型（数字工厂） |
China National Standards EM |
English PDF |
| GB/T 8129-2015 |
Industrial automation systEMs—Numerical control of machines—Vocabulary 工业自动化系统 机床数值控制 词汇 |
China National Standards EM |
English PDF |
| GB/T 5070-2015 |
ChEMical analysis of refractories containing chrome 含铬耐火材料化学分析方法 |
China National Standards EM |
English PDF |
| GB/T 4830-2015 |
Pressure range and quality of air supply for the industrial process measurEMent and control instruments 工业自动化仪表 气源压力范围和质量 |
China National Standards EM |
English PDF |
| GB/T 3821-2015 |
Small and medium power internal combustion engines—Cleanliness limits and measurEMents 中小功率内燃机 清洁度限值和测定方法 |
China National Standards EM |
English PDF |
| GB/T 32265.1-2015 |
Ease of operation of everyday products—Part 1：Design requirEMents for context of use and user characteristics 日用产品的易操作性 第1部分：针对使用情境和用户特征的设计要求 |
China National Standards EM |
English PDF |
| GB/T 32255-2015 |
General martensitic stainless steel and alloy steel castings suitable for high tEMperature and high pressure service 高温承压马氏体不锈钢和合金钢通用铸件 |
China National Standards EM |
English PDF |
| Find out:16399Items | To Page of: First -Previous-Next -Last | [65] [66] [67] [68] [69] [70] [71] |
+86-755-25831330
