Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 25799-2010 |
Glossary of textile dyeing and finisHing auxiliaries 纺织染整助剂名词术语 |
China National Standards H |
 English PDF |
| GB/T 25798-2010 |
Classification of textile dyeing and finisHing auxiliaries 纺织染整助剂分类 |
China National Standards H |
English PDF |
| GB/T 25797-2010 |
A kind of pHotosensitive emulsion(single component) for plate making on fabric screen printing 纺织平网印花制版单液型感光乳液 |
China National Standards H |
English PDF |
| GB/T 25789-2010 |
p-PHenylenediamine 对苯二胺 |
China National Standards H |
English PDF |
| GB/T 25787-2010 |
4，4’-SulfonyldipHenol（Bisphenol-S） 4，4’-二羟基二苯砜（双酚S） |
China National Standards H |
English PDF |
| GB/T 25785-2010 |
2-Amino-4,6-dinitropHenol sodium（picramic acid sodium hydrate） 2-氨基-4,6-二硝基酚钠（苦氨酸钠） |
China National Standards H |
English PDF |
| GB/T 25784-2010 |
2,4,6 -TrinitropHenol（Picric acid） 2,4,6-三硝基苯酚（苦味酸） |
China National Standards H |
English PDF |
| GB/T 25783-2010 |
1，4-DiaminoantHraquinone leuco compound 1，4-二氨基蒽醌隐色体 |
China National Standards H |
English PDF |
| GB/T 25782-2010 |
1-NapHthol 1-萘酚 |
China National Standards H |
English PDF |
| GB/T 25781-2010 |
1-NapHthyamine 1-萘胺 |
China National Standards H |
English PDF |
| GB/T 25780-2010 |
1-NitroantHraquinone 1-硝基蒽醌 |
China National Standards H |
English PDF |
| GB/T 25758.5-2010 |
Non-destructive testing - CHaracteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes 无损检测 工业X射线系统焦点特性 第5部分：小焦点和微焦点X射线管的有效焦点尺寸的测量方法 |
China National Standards H |
English PDF |
| GB/T 25758.4-2010 |
Non-destructive testing - CHaracteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method 无损检测 工业X射线系统焦点特性 第4部分：边缘方法 |
China National Standards H |
English PDF |
| GB/T 25758.3-2010 |
Non-destructive testing - CHaracteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method 无损检测 工业X射线系统焦点特性 第3部分：狭缝照相机射线照相方法 |
China National Standards H |
English PDF |
| GB/T 25758.2-2010 |
Non-destructive testing - CHaracteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method 无损检测 工业X射线系统焦点特性 第2部分：针孔照相机射线照相方法 |
China National Standards H |
English PDF |
| GB/T 25758.1-2010 |
Non-destructive testing - CHaracteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method 无损检测 工业X射线系统焦点特性 第1部分：扫描方法 |
China National Standards H |
English PDF |
| GB/T 25757-2010 |
Non-destructive testing - Test metHods of performance characteristics of automatic magnetic flux leakage testing systems for steel tubes 无损检测 钢管自动漏磁检测系统综合性能测试方法 |
China National Standards H |
English PDF |
| GB/T 25755-2010 |
Vacuum tecHnology - Sputter-ion pumps - Measurement of performance characteristics 真空技术 溅射离子泵 性能参数的测量 |
China National Standards H |
English PDF |
| GB/T 25754-2010 |
Vacuum tecHnology - Right-angle valve - Dimensions and interfaces for pneumatic actuator 真空技术 直角阀 尺寸和气动装置的接口 |
China National Standards H |
English PDF |
| GB/T 25753.2-2010 |
Vacuum tecHnology - Roots vacuum pump - Measurement of performance characteristics - Part 2: Measurement of compression ratio of the zero throughput 真空技术 罗茨真空泵性能测量方法 第2部分：零流量压缩比的测量 |
China National Standards H |
English PDF |
| GB/T 25753.1-2010 |
Vacuum tecHnology - Roots vacuum pump - Measurement of performance characteristics - Part 1: Measurement of maximum tolerable differential pressure 真空技术 罗茨真空泵性能测量方法 第1部分：最大允许压差的测量 |
China National Standards H |
English PDF |
| GB/T 25751-2010 |
Compression gas spring tecHnical specification 压缩气弹簧技术条件 |
China National Standards H |
English PDF |
| GB/T 25750-2010 |
Lockable gas spring tecHnical specification 可锁定气弹簧技术条件 |
China National Standards H |
English PDF |
| GB/T 25749.4-2010 |
Safety of macHinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system 机械安全 空气传播的有害物质排放的评估 第4部分：测量排气系统捕获效率的示踪法 |
China National Standards H |
English PDF |
| GB/T 25749.3-2010 |
Safety of macHinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant 机械安全 空气传播的有害物质排放的评估 第3部分：测量给定污染物排放率的试验台法 |
China National Standards H |
English PDF |
| GB/T 25749.2-2010 |
Safety of macHinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant 机械安全 空气传播的有害物质排放的评估 第2部分：测量给定污染物排放率的示踪气体法 |
China National Standards H |
English PDF |
| GB/T 25749.1-2010 |
Safety of macHinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods 机械安全 空气传播的有害物质排放的评估 第1部分：试验方法的选择 |
China National Standards H |
English PDF |
| GB/T 16709.2-2010 |
Vacuum tecHnology- Mounting dimensions of pipeline fittings Part 2: Knife-edge flange type 真空技术 管路配件的装配尺寸 第2部分：刀口法兰型 |
China National Standards H |
English PDF |
| GB/T 16709.1-2010 |
Vacuum tecHnology - Mounting dimensions of pipeline fittings - Part 1: Non knife-edge flange type 真空技术 管路配件的装配尺寸 第1部分：非刀口法兰型 |
China National Standards H |
English PDF |
| GB/T 10661-2010 |
Fluorescent wHitening agent VBL（C.I. Fluorescent whitening agent 85） 荧光增白剂VBL（C.I.荧光增白剂85） |
China National Standards H |
English PDF |
| GB 14925-2010 |
Laboratory animal - Requirements of environment and Housing facilities 实验动物 环境及设施 |
China National Standards H |
English PDF |
| GB/T 5313-2010 |
Steel plates witH through-thickness characteristics 厚度方向性能钢板 |
China National Standards H |
English PDF |
| GB/T 25952-2010 |
MetHods for sampling and sample preperation of flotation nickel conentrates in bulk 散装浮选镍精矿取样、制样方法 |
China National Standards H |
English PDF |
| GB/T 25951.3-2010 |
Nickel and nickel alloys - Terms and definitions - Part 3: WrougHt products and castings 镍及镍合金 术语和定义 第3部分：加工产品和铸件 |
China National Standards H |
English PDF |
| GB/T 25950-2010 |
Aluminium ores - Experimental determination of tHe heterogeneity of constitution 铝土矿 成分不均匀性的实验测定 |
China National Standards H |
English PDF |
| GB/T 25948-2010 |
Aluminium ores - Determination of total iron content - Titanium tricHloride reduction method 铝土矿 铁总量的测定 三氯化钛还原法 |
China National Standards H |
English PDF |
| GB/T 25947-2010 |
Aluminium ores - Determination of tHe moisture content of bulk material 铝土矿 散装料水分含量的测定 |
China National Standards H |
English PDF |
| GB/T 25946-2010 |
Aluminium ores - Experimental metHods for checking the bias of sampling 铝土矿 取样偏差的检验方法 |
China National Standards H |
English PDF |
| GB/T 25944-2010 |
Aluminium ores - Experimental determination of tHe heterogeneity of distribution of a lot 铝土矿 批中不均匀性的实验测定 |
China National Standards H |
English PDF |
| GB/T 25943-2010 |
Aluminium ores - Experimental metHods for checking the precision of sampling 铝土矿 检验取样精度的实验方法 |
China National Standards H |
English PDF |
| GB/T 25934.3-2010 |
MetHods for chemical analysis of high - purity gold - Part 3: Ethylether extraction separation - Inductively coupled plasma-atomic emission spectrometry - Determinaion of impurity elements contents 高纯金化学分析方法 第3部分：乙醚萃取分离ICP-AES法 测定杂质元素的含量 |
China National Standards H |
English PDF |
| GB/T 25934.2-2010 |
MetHods for chemical analysis of high purity gold - Part 2: Inductively coupled plasma mass spectrometry standard enter emendation-inner standard method - Determination of impurity elements contents 高纯金化学分析方法 第2部分：ICP-MS-标准加入校正-内标法 测定杂质元素的含量 |
China National Standards H |
English PDF |
| GB/T 25934.1-2010 |
MetHods for chemical analysis of high purity gold - Part 1: Ethyl acetate extraction separation - Inductively coupled plasma - atomic emission spectrometry - Determination of impurity elements contents 高纯金化学分析方法 第1部分：乙酸乙脂萃取分离ICP-AES法 测定杂质元素的含量 |
China National Standards H |
English PDF |
| GB/T 25933-2010 |
High-purity gold 高纯金 |
China National Standards H |
English PDF |
| GB/T 25834-2010 |
Corrosion of metals and alloys - Accelerate corrosion testing of iron and steel in outdoor atmospHeres 金属和合金的腐蚀 钢铁户外大气加速腐蚀试验 |
China National Standards H |
English PDF |
| GB/T 25833-2010 |
THe galvanized steel wire ropes for highway guardrail 公路护栏用镀锌钢丝绳 |
China National Standards H |
English PDF |
| GB/T 25832-2010 |
Hot rolled steel plates and strips for porcelain enameling 搪瓷用热轧钢板和钢带 |
China National Standards H |
English PDF |
| GB/T 25829-2010 |
Permissisible variations for cHemical composition of superalloy products 高温合金成品化学成分允许偏差 |
China National Standards H |
English PDF |
| GB/T 25826-2010 |
Epoxy-coated steel for tHe reinforcement of concrete 钢筋混凝土用环氧涂层钢筋 |
China National Standards H |
English PDF |
| GB/T 25825-2010 |
Rolls for Hot strip mill and plate mill 热轧钢板带轧辊 |
China National Standards H |
English PDF |
| GB/T 25822-2010 |
SHaped and round seamless steel tubes for axle 车轴用异型及圆形无缝钢管 |
China National Standards H |
English PDF |
| GB/T 14999.7-2010 |
Test metHods for grain sizes，primary dendrite spacing and microshrinkage of superalloy castings 高温合金铸件晶粒度、一次枝晶间距和显微疏松测定方法 |
China National Standards H |
English PDF |
| GB/T 14999.6-2010 |
Test metHods for characterizing duplex grain sizes and primary carbides distribution of superalloy forgings 锻制高温合金双重晶粒组织和一次碳化物分布测定方法 |
China National Standards H |
English PDF |
| GB/T 1499.3-2010 |
Steel for tHe reinforcement of concrete - Part3 : Welded fabric 钢筋混凝土用钢 第3部分：钢筋焊接网 |
China National Standards H |
English PDF |
| GB/T 1482-2010 |
Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter) 金属粉末 流动性的测定 标准漏斗法（霍尔流速计） |
China National Standards H |
English PDF |
| GB/T 14263-2010 |
MetHods for sampling and sample preparation of flotation copper concentrates in bulk 散装浮选铜精矿取样、制样方法 |
China National Standards H |
English PDF |
| GB/T 14262-2010 |
MetHods for sampling and sample preparation of flotation lead concentrates in bulk 散装浮选铅精矿取样、制样方法 |
China National Standards H |
English PDF |
| GB/T 14261-2010 |
MetHods for sampling and sample preparation of flotation zinc concentrates in bulk 散装浮选锌精矿取样、制样方法 |
China National Standards H |
English PDF |
| GB/T 14260-2010 |
General rules for sampling and sample preparation of Heavy nonferrous metals flotation concentrates in bulk 散装重有色金属浮选精矿取样、制样通则 |
China National Standards H |
English PDF |
| GB/T 11263-2010 |
Hot-rolled H and cut T section steel 热轧H型钢和剖分T型钢 |
China National Standards H |
English PDF |
| GB/T 6335.2-2010 |
Rotary and rotary impact masonry drill bits witH hardmetal tips Part 2: Technical specifications 旋转和旋转冲击式硬质合金建工钻 第2部分：技术条件 |
China National Standards H |
English PDF |
| GB/T 6335.1-2010 |
Rotary and rotary impact masonry drill bits witH hardmetal tips Part1: Dimensions 旋转和旋转冲击式硬质合金建工钻 第1部分：尺寸 |
China National Standards H |
English PDF |
| GB/T 6080.2-2010 |
MacHine hacksaw blades - Part 2: Technical specifications 机用锯条 第2部分：技术条件 |
China National Standards H |
English PDF |
| GB/T 6080.1-2010 |
MacHine hacksaw blades - Part 1: Types and dimensions 机用锯条 第1部分：型式和尺寸 |
China National Standards H |
English PDF |
| GB/T 25941-2010 |
Plastic vacuum forming macHine 塑料真空成型机 |
China National Standards H |
English PDF |
| GB/T 25940-2010 |
IRHD dead-load testers 定负荷国际橡胶硬度计 |
China National Standards H |
English PDF |
| GB/T 25938-2010 |
Automatic weigHing system for small chemicals in rubber mixing process 炼胶工序中小料自动配料称量系统 |
China National Standards H |
English PDF |
| GB/T 25937-2010 |
Radial ply tyre single stage building macHine 子午线轮胎一次法成型机 |
China National Standards H |
English PDF |
| GB/T 25721-2010 |
Pneumatic forging Hammer - Technical requirements 空气锤 技术条件 |
China National Standards H |
English PDF |
| GB/T 25720-2010 |
Pneumatic forging Hammer - Type and parameter 空气锤 型式与基本参数 |
China National Standards H |
English PDF |
| GB/T 25719-2010 |
Electro Hydraulic forging hammer - Technical requirements 电液锤 技术条件 |
China National Standards H |
English PDF |
| GB/T 25718-2010 |
Electro Hydraulic forging hammer - Type and basic parameter 电液锤 型式与基本参数 |
China National Standards H |
English PDF |
| GB/T 25717-2010 |
Hot chamber die casting machines for magnesium alloys 镁合金热室压铸机 |
China National Standards H |
English PDF |
| GB/T 25716-2010 |
cold cHamber die casting machines for magnesium alloys 镁合金冷室压铸机 |
China National Standards H |
English PDF |
| GB/T 25715-2010 |
SpHere nodular cast pipe mold finish machining project 离心球墨铸管管模 |
China National Standards H |
English PDF |
| GB/T 25714.2-2010 |
Molten iron ladle - Part 2: TecHnical requirements 铁液浇包 第2部分：技术条件 |
China National Standards H |
English PDF |
| GB/T 25713-2010 |
MacHinery vibrating stress relief device 机械式振动时效装置 |
China National Standards H |
English PDF |
| GB/T 25712-2010 |
Vibratory stress relief tecHnology - Parameter selection and effect evaluation methods 振动时效工艺参数选择及效果评定方法 |
China National Standards H |
English PDF |
| GB/T 25711-2010 |
Foundry macHinery - General technical requirements 铸造机械 通用技术条件 |
China National Standards H |
English PDF |
| GB/T 25707-2010 |
Hydraulic defence explosion mine hoists and mine winders 液压防爆提升机和提升绞车 |
China National Standards H |
English PDF |
| GB/T 25706-2010 |
Code of designations for mining macHinery products 矿山机械产品型号编制方法 |
China National Standards H |
English PDF |
| GB/T 25702-2010 |
Single toggle jaw crusHer - Wear consumption of Jaw plate 复摆颚式破碎机 颚板磨耗 |
China National Standards H |
English PDF |
| GB/T 25701-2010 |
Single toggle jaw crusHer - Specific metal consumption 复摆颚式破碎机 金属单耗 |
China National Standards H |
English PDF |
| GB/T 25700-2010 |
Single toggle jaw crusHer - Energy consumption index 复摆颚式破碎机 能耗指标 |
China National Standards H |
English PDF |
| GB/T 25698-2010 |
Feed processing tecHnology terms 饲料加工工艺术语 |
China National Standards H |
English PDF |
| GB/T 25696-2010 |
Road construction and road maintenance macHinery and equipment - Asphalt pavement heater - Terminology and commercial specifications 道路施工与养护机械设备 沥青路面加热机 术语和商业规格 |
China National Standards H |
English PDF |
| GB/T 25695-2010 |
Building construction macHinery and equipment - Borehole construction general regulations for rotary rig 建筑施工机械与设备 旋挖钻机成孔施工通用规程 |
China National Standards H |
English PDF |
| GB/T 25694-2010 |
EartH-moving machinery - Skid-steer loaders 土方机械 滑移转向装载机 |
China National Standards H |
English PDF |
| GB/T 25693-2010 |
EartH-moving machinery - remote - controlled demolition robot 土方机械 遥控拆除机 |
China National Standards H |
English PDF |
| GB/T 25692-2010 |
EartH-moving machinery - Retarders for dumpers and tractor-scrapers - Performance tests 土方机械 自卸车和自行式铲运机用限速器 性能试验 |
China National Standards H |
English PDF |
| GB/T 25691-2010 |
EartH-moving machinery - Open bowl scraper - Volumetric rating 土方机械 开斗式铲运机 容量标定 |
China National Standards H |
English PDF |
| GB/T 25690-2010 |
EartH-moving machinery - Elevating scrapers - Volumetric ratings 土方机械 升运式铲运机 容量标定 |
China National Standards H |
English PDF |
| GB/T 25689-2010 |
EartH-moving machinery - Dumper bodies - Volumetric rating 土方机械 自卸车车厢 容量标定 |
China National Standards H |
English PDF |
| GB/T 25688.2-2010 |
EartH-moving machinery - Service tools - Part 2: Mechanical pullers and pushers 土方机械 维修工具 第2部分：机械式拉拔器和推拔器 |
China National Standards H |
English PDF |
| GB/T 25688.1-2010 |
EartH-moving machinery - Service tools - Part 1: Common maintenance and adjustment tools 土方机械 维修工具 第1部分：通用维修和调整工具 |
China National Standards H |
English PDF |
| GB/T 25687.2-2010 |
EartH-moving machinery - Multilingual listing of equivalent terms -Part 2: Performance and dimensions 土方机械 同义术语的多语种列表 第2部分：性能和尺寸 |
China National Standards H |
English PDF |
| GB/T 25687.1-2010 |
EartH-moving machinery - Multilingual listing of equivalent terms - Part 1: General 土方机械 同义术语的多语种列表 第1部分：综合 |
China National Standards H |
English PDF |
| GB/T 25686-2010 |
EartH-moving machinery - Safety requirements for remote operator control 土方机械 司机遥控的安全要求 |
China National Standards H |
English PDF |
| GB/T 25685.2-2010 |
EartH-moving machinery - Field of vision of surveillance and rear-view mirrors - Part 2: Performance criteria 土方机械 监视镜和后视镜的视野 第2部分：性能准则 |
China National Standards H |
English PDF |
| GB/T 25685.1-2010 |
EartH-moving machinery - Field of vision of surveillance and rear-view mirrors - Part 1: Test methods 土方机械 监视镜和后视镜的视野 第1部分：试验方法 |
China National Standards H |
English PDF |
| Find out:38864Items | To Page of: First -Previous-Next -Last | [218] [219] [220] [221] [222] [223] [224] |
+86-755-25831330
