GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 21982-2008 |
Determination of residues of zearalanol, β-zearalanol, α-zearalenol, β-zearalenol, zearalanone and zearalenone in foodstuffs of animal origin - LC-MS/MS metHod 动物源食品中玉米赤霉醇、β-玉米赤霉醇、α-玉米赤霉烯醇、β-玉米赤霉烯醇、玉米赤霉酮和玉米赤霉烯酮残留量检测方法 液相色谱-质谱/质谱法 |
China National Standards H |
English PDF |
GB/T 21981-2008 |
Determination of Hormone multiresidues in foodstuffs of animal origin - LC-MS/MS method 动物源食品中激素多残留检测方法 液相色谱-质谱/质谱法 |
China National Standards H |
English PDF |
GB/T 9870.2-2008 |
Rubber, vulcanized or tHermoplastic - Determination of dynamic properties - Part 2:Torsion pendulum methods at low frequencies 硫化橡胶或热塑性橡胶动态性能的测定 第2部分:低频扭摆法 |
China National Standards H |
English PDF |
GB/T 9766.3-2008 |
Test metHod for tyre valve - Part 3: Snap-in valves - Test methods 轮胎气门嘴试验方法 第3部分:卡扣式气门嘴试验方法 |
China National Standards H |
English PDF |
GB/T 9766.2-2008 |
Test metHod for tyre valve - Part 2: Rubber base valves test methods 轮胎气门嘴试验方法 第2部分:胶座气门嘴试验方法 |
China National Standards H |
English PDF |
GB/T 9766.1-2008 |
Test metHod for tyre valves - Part 1: Test method for clamp-in valves 轮胎气门嘴试验方法 第1部分:压紧式内胎气门嘴试验方法 |
China National Standards H |
English PDF |
GB/T 9751.1-2008 |
Paints and varnisHes - Determination of viscosity using rotary viscometers - Part1:Cone-and-plate viscometer operated at a high rate of shear 色漆和清漆 用旋转黏度计测定黏度 第1部分:以高剪切速率操作的锥板黏度计 |
China National Standards H |
English PDF |
GB/T 9271-2008 |
Paints and varnisHes standard panels for testing 色漆和清漆 标准试板 |
China National Standards H |
English PDF |
GB/T 9267-2008 |
Emulsions for coatings and polymer dispersions for coatings and plastics - Determination of wHite point temperature and minimum film-forming temperature 涂料用乳液和涂料、塑料用聚合物分散体 白点温度和最低成膜温度的测定 |
China National Standards H |
English PDF |
GB/T 9262-2008 |
Cargo Hold paint for ship 船用货舱漆 |
China National Standards H |
English PDF |
GB/T 9260-2008 |
Boottopping paint for sHip 船用水线漆 |
China National Standards H |
English PDF |
GB/T 8296-2008 |
Raw natural rubber and rubber latices - Determination of manganese content - Sodium periodate pHotmetric methods 天然生胶和胶乳 锰含量的测定 高碘酸钠光度法 |
China National Standards H |
English PDF |
GB/T 8295-2008 |
Natural Rubber and latex - Determination of copper content - PHotometric method 天然橡胶和胶乳 铜含量的测定 光度法 |
China National Standards H |
English PDF |
GB/T 8081-2008 |
Rubber, raw natural - Guidelines for tHe specification of technically specified rubber(TSR) 天然生胶 技术分级橡胶(TSR)规格导则 |
China National Standards H |
English PDF |
GB/T 7814-2008 |
Isopropyl alcoHol for industrial use 工业用异丙醇 |
China National Standards H |
English PDF |
GB/T 7531-2008 |
Determination of ignition residue for organic cHemical products 有机化工产品灼烧残渣的测定 |
China National Standards H |
English PDF |
GB/T 9275-2008 |
Paint and varnisHes - Buchholz indentation test 色漆和清漆 巴克霍尔兹压痕试验 |
China National Standards H |
English PDF |
GB/T 7124-2008 |
AdHesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies 胶粘剂 拉伸剪切强度的测定(刚性材料对刚性材料) |
China National Standards H |
English PDF |
GB/T 6748-2008 |
Anticorrosive paint for sHip 船用防锈漆 |
China National Standards H |
English PDF |
GB/T 6746-2008 |
Oil tank paint for sHip 船用油舱漆 |
China National Standards H |
English PDF |
GB/T 6744-2008 |
Binders for paints and varnisHes - Determination of saponification value - Titrmetric method 色漆和清漆用漆基 皂化值的测定 滴定法 |
China National Standards H |
English PDF |
GB/T 6743-2008 |
Plastics(polyester resins) and paints and varnisHes(binders) - Determination of partial acid value and total acid value 塑料用聚酯树脂、色漆和清漆用漆基 部分酸值和总酸值的测定 |
China National Standards H |
English PDF |
GB/T 6488-2008 |
Liquid cHemicals - Determination of refrative index at 20℃ 液体化工产品 折光率的测定(20℃) |
China National Standards H |
English PDF |
GB/T 6324.5-2008 |
Test metHod of organic chemical products - Part 5: Determination of trace quantities of carbonyl compounds in organic chemicals 有机化工产品试验方法 第5部分:有机化工产品中羰基化合物含量的测定 |
China National Standards H |
English PDF |
GB/T 5832.2-2008 |
Determination of moisture in gases - Part 2:Dew point metHod 气体中微量水分的测定 第2部分:露点法 |
China National Standards H |
English PDF |
GB/T 5720-2008 |
Test metHods for rubber O-rings O形橡胶密封圈试验方法 |
China National Standards H |
English PDF |
GB/T 533-2008 |
Rubber,vulcanized or tHermoplastic - Determination of density 硫化橡胶或热塑性橡胶 密度的测定 |
China National Standards H |
English PDF |
GB/T 532-2008 |
Rubber, vulcanized or tHermoplastic - Determination of adhesion to textile fabric 硫化橡胶或热塑性橡胶与织物粘合强度的测定 |
China National Standards H |
English PDF |
GB/T 531.1-2008 |
Rubber, vulcanized or tHermoplastic - Determination of indentation hardness - Part 1:Duromerer method (Shore hardness) 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分:邵氏硬度计法(邵尔硬度) |
China National Standards H |
English PDF |
GB/T 529-2008 |
Rubber,vulcanized or tHermoplastic - Determination of tear strength(Trouser,angle and crescent test pieces) 硫化橡胶或热塑性橡胶撕裂强度的测定(裤形、直角形和新月形试样) |
China National Standards H |
English PDF |
GB/T 5211.5-2008 |
MetHod for the determination of resistance to materials of pigments 颜料耐性测定法 |
China National Standards H |
English PDF |
GB/T 5211.11-2008 |
Determination of water-soluble sulfates, cHlorides and nitrates of pigments 颜料水溶硫酸盐、氯化物和硝酸盐的测定 |
China National Standards H |
English PDF |
GB/T 5208-2008 |
Determination of flasH point - Rapid equilibrium closed cup method 闪点的测定 快速平衡闭杯法 |
China National Standards H |
English PDF |
GB/T 4611-2008 |
Determination metHod of "fish eyes"for polyvinyl chloride resins of general use 通用型聚氯乙烯树脂“鱼眼”的测定方法 |
China National Standards H |
English PDF |
GB/T 3676-2008 |
Maleic anHydride for industrial use 工业用顺丁烯二酸酐 |
China National Standards H |
English PDF |
GB/T 6823-2008 |
Ballast tanks paint for sHip 船舶压载舱漆 |
China National Standards H |
English PDF |
GB/T 21993-2008 |
Polyvinyl cHloride resins - Determination of the content of methanol or ethanol extract 聚氯乙烯树脂 甲醇或乙醇萃取物含量的测定 |
China National Standards H |
English PDF |
GB/T 21992-2008 |
Polyvinyl cHloride resins for Paste - Determination of number of impurities particles and foreign particles 糊用聚氯乙烯树脂 杂质与外来粒子数的测定 |
China National Standards H |
English PDF |
GB/T 21991-2008 |
Plastics - Preparation of PVC paste for test purpose - Planetary-mixer metHod 塑料 试验用聚氯乙烯(PVC)糊的制备 行星混合器法 |
China National Standards H |
English PDF |
GB/T 21990-2008 |
Polyvinyl cHloride (PVC) pastes - Determination of fineness of grind 聚氯乙烯(PVC)糊 刮板细度的测定 |
China National Standards H |
English PDF |
GB/T 21989-2008 |
Plastics - Poly(vinyl cHloride)pastes - Determination of apparent viscosity using the severs rheometer 塑料 聚氯乙烯糊 用Severs流变仪测定表观黏度 |
China National Standards H |
English PDF |
GB/T 21988-2008 |
Plastics-Vinyl cHloride homopolymer and copolymer resins-Sieve analysis in water 塑料 氯乙烯均聚和共聚树脂 水中筛分析 |
China National Standards H |
English PDF |
GB/T 21910-2008 |
MetHod for measuring relative wet grip performance of passenger car tyres 轿车轮胎湿路面相对抓着性能试验方法 |
China National Standards H |
English PDF |
GB/T 1766-2008 |
Paints and varnisHes - Rating schemes of degradation of coats 色漆和清漆 涂层老化的评级方法 |
China National Standards H |
English PDF |
GB/T 17410-2008 |
Organic Heat transfer material heaters 有机热载体炉 |
China National Standards H |
English PDF |
GB/T 1721-2008 |
Determination of appearance and transparency of varnisHes, boiled oils and thinners 清漆、清油及稀释剂外观和透明度测定法 |
China National Standards H |
English PDF |
GB/T 1713-2008 |
Determination of density of pigments - Pyknometer metHod 颜料密度的测定 比重瓶法 |
China National Standards H |
English PDF |
GB/T 16613-2008 |
Plastics - Preparation of PVC pastes for test purposes - Dissolver metHod 塑料 试验用聚氯乙烯(PVC)糊的制备 分散器法 |
China National Standards H |
English PDF |
GB/T 14832-2008 |
Test metHods for compatibility between hydraulic fluids and standard elastomeric materials 标准弹性体材料与液压液体的相容性试验 |
China National Standards H |
English PDF |
GB/T 13893-2008 |
Paints and varnisHes - Determination of resistnace to humidity - Continuous condensation 色漆和清漆 耐湿性的测定 连续冷凝法 |
China National Standards H |
English PDF |
GB/T 13549-2008 |
CHlorsulphonic acid for industrial use 工业氯磺酸 |
China National Standards H |
English PDF |
GB/T 13258-2008 |
TecHnical phosphorus pentasulfide 工业五硫化二磷 |
China National Standards H |
English PDF |
GB/T 13248-2008 |
Rubber and rubber latices - Determination of manganese content - Sodium periodate pHotometric methodes 橡胶和胶乳 锰含量的测定 高碘酸钠光度法 |
China National Standards H |
English PDF |
GB/T 12830-2008 |
Rubber,vulcanized or tHermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple shear methods 硫化橡胶或热塑性橡胶 与刚性板剪切模量和粘合强度的测定 四板剪切法 |
China National Standards H |
English PDF |
GB/T 1192-2008 |
TecHincal specification of agricultural tyres 农业轮胎技术条件 |
China National Standards H |
English PDF |
GB/T 11501-2008 |
PHotography - Density Measurement - Part 3:Spectral Conditions 摄影 密度测量 第3部分:光谱条件 |
China National Standards H |
English PDF |
GB/T 10707-2008 |
Rubber - Determination of tHe burning 橡胶燃烧性能的测定 |
China National Standards H |
English PDF |
GB/T 10666-2008 |
Calcium Hypochlorite 次氯酸钙(漂粉精) |
China National Standards H |
English PDF |
GB/T 972-2008 |
THread rolling flat dies 搓丝板 |
China National Standards H |
English PDF |
GB/T 971-2008 |
tHread rolling cylindrical dies 滚丝轮 |
China National Standards H |
English PDF |
GB/T 970.2-2008 |
Circular screwing dies - Part 2: TecHnical specifications 圆板牙 第2部分:技术条件 |
China National Standards H |
English PDF |
GB/T 970.1-2008 |
Circular screwing dies - Part 1: THe types and dimensions for circular screwing dies and die stocks 圆板牙 第1部分:圆板牙和圆板牙架的型式和尺寸 |
China National Standards H |
English PDF |
GB/T 9487-2008 |
Diesel engines - ExHaust gas measurement under free acceleration 柴油机自由加速排气烟度的测量方法 |
China National Standards H |
English PDF |
GB/T 8498-2008 |
EartH-moving machinery - Basic type - Identification and terms and definitions 土方机械 基本类型 识别、术语和定义 |
China National Standards H |
English PDF |
GB/T 7121.1-2008 |
THe strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分:后置式静态试验方法 |
China National Standards H |
English PDF |
GB/T 5862-2008 |
Agricultural tractors and macHinery - General purpose quick-action hydraulic couplers 农业拖拉机和机具 通用液压快换接头 |
China National Standards H |
English PDF |
GB/T 5669-2008 |
Rotary tiller - Rotary blades and blade Holders 旋耕机械 刀和刀座 |
China National Standards H |
English PDF |
GB/T 5667-2008 |
Productive testing metHods for agricultural machinery 农业机械 生产试验方法 |
China National Standards H |
English PDF |
GB/T 5262-2008 |
Agricultural macHinery testing conditions-general rules for measuring methods 农业机械 试验条件测定方法的一般规定 |
China National Standards H |
English PDF |
GB/T 4346-2008 |
MacHine tools - Manually operated self-centring chucks 机床 手动自定心卡盘 |
China National Standards H |
English PDF |
GB/T 4127.7-2008 |
Bonded abrasive products - Dimensions - Part 7: Grinding wHeels for manually guided grinding 固结磨具 尺寸 第7部分:人工操纵磨削砂轮 |
China National Standards H |
English PDF |
GB/T 4127.6-2008 |
Bonded abrasive products - Dimensions - Part 6: Grinding wHeels for tool and tool room grinding 固结磨具 尺寸 第6部分:工具磨和工具室用砂轮 |
China National Standards H |
English PDF |
GB/T 4127.5-2008 |
Bonded abrasive products - Dimensions - Part 5: Grinding wHeels for surface grinding/face grinding 固结磨具 尺寸 第5部分:平面磨削用端面磨砂轮 |
China National Standards H |
English PDF |
GB/T 4127.4-2008 |
Bonded abrasive products - Dimensions - Part 4: Grinding wHeels for suface grinding/peripheral grinding 固结磨具 尺寸 第4部分:平面磨削用周边磨砂轮 |
China National Standards H |
English PDF |
GB/T 4127.14-2008 |
Bonded abrasive products - Dimensions - Part 14: Grinding wHeels for deburring and fettling/snagging on an angle grinder 固结磨具 尺寸 第14部分:角向砂轮机用去毛刺、荒磨和粗磨砂轮 |
China National Standards H |
English PDF |
GB/T 4127.13-2008 |
Bonded abrasive products - Dimensions - Part 13: Grinding wHeels for deburring and fettling on a vertical grinder 固结磨具 尺寸 第13部分:立式砂轮机用去毛刺和荒磨砂轮 |
China National Standards H |
English PDF |
GB/T 4127.12-2008 |
Bonded abrasive products - Dimensions - Part 12: Grinding wHeels for deburring and fettling on a straight grinder 固结磨具 尺寸 第12部分:直向砂轮机用去毛刺和荒磨砂轮 |
China National Standards H |
English PDF |
GB/T 4127.11-2008 |
Bonded abrasive products - Dimensions - Part 11:Hand finishing sticks 固结磨具 尺寸 第11部分:手持抛光磨石 |
China National Standards H |
English PDF |
GB/T 4127.10-2008 |
Bonded abrasive products - Dimensions - Part 10: Stones for Honing and superfinishings 固结磨具 尺寸 第10部分:珩磨和超精磨磨石 |
China National Standards H |
English PDF |
GB/T 3506-2008 |
MacHine taps with helical flutes 螺旋槽丝锥 |
China National Standards H |
English PDF |
GB/T 2554-2008 |
MecHanical dividing heads 机械分度头 |
China National Standards H |
English PDF |
GB/T 2485-2008 |
Bonded abrasive products - TecHnical specifications 固结磨具 技术条件 |
China National Standards H |
English PDF |
GB/T 2479-2008 |
Conventional abrasive - WHite fused alumina 普通磨料 白刚玉 |
China National Standards H |
English PDF |
GB/T 21960-2008 |
THe testing method and accepting condition of the driver’s seat on agricultural and forestry tractors 农林拖拉机驾驶座试验方法和验收条件 |
China National Standards H |
English PDF |
GB/T 21958-2008 |
Front drive axle for wHeeled tractor 轮式拖拉机 前驱动桥 |
China National Standards H |
English PDF |
GB/T 21957-2008 |
THe fatigue-life testing method of the axle shaft and drive shaft on the test stand,wheeled agricultural tractor 农业轮式拖拉机半轴和驱动轴 台架疲劳寿命试验方法 |
China National Standards H |
English PDF |
GB/T 21956.3-2008 |
THe strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3:Static testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分:后置式静态试验方法 |
China National Standards H |
English PDF |
GB/T 21956.2-2008 |
THe strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2:Dynamic testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分:前置式动态试验方法 |
China National Standards H |
English PDF |
GB/T 21956.1-2008 |
THe strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1:Static testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分:前置式静态试验方法 |
China National Standards H |
English PDF |
GB/T 21955-2008 |
Tractors and macHinery for agriculture and forestry - Paper friction disc - Technical specifications 农林拖拉机和机械 纸基摩擦片 技术条件 |
China National Standards H |
English PDF |
GB/T 21954.2-2008 |
Metal cutting band saw blades - Part 2:CHaracteristics and dimensions 金属切割带锯条 第2部分:特性和尺寸 |
China National Standards H |
English PDF |
GB/T 21950-2008 |
Plunge sHaving cutters 盘形径向剃齿刀 |
China National Standards H |
English PDF |
GB/T 21949.2-2008 |
CNC universal tool milling macHines - Part 2: Specifications 数控万能工具铣床 第2部分:技术条件 |
China National Standards H |
English PDF |
GB/T 21949.1-2008 |
CNC universal tool milling macHines - Part 1: Testing of the accuracy 数控万能工具铣床 第1部分:精度检验 |
China National Standards H |
English PDF |
GB/T 21948.2-2008 |
Test conditions for CNC milling macHines with table of variable height - Testing of accuracy - Part 2: Machines with vertical spindle 数控升降台铣床检验条件 精度检验 第2部分:立式铣床 |
China National Standards H |
English PDF |
GB/T 21948.1-2008 |
Test conditions for CNC milling macHines with table of variable height - Testing of accuracy - Part 1: Machines with horizontal spindle 数控升降台铣床检验条件 精度检验 第1部分:卧式铣床 |
China National Standards H |
English PDF |
GB/T 21947-2008 |
Numerically milling macHines for special screws - Testing of the accuracy 数控异型螺杆铣床 精度检验 |
China National Standards H |
English PDF |
GB/T 21946-2008 |
Numerical control gear sHaving machines - Testing of the accuracy 数控剃齿机 精度检验 |
China National Standards H |
English PDF |
GB/T 21945-2008 |
Numerical control sector gear sHaping machines - Testing of the accuracy 数控扇形齿轮插齿机 精度检验 |
China National Standards H |
English PDF |
GB/T 21942-2008 |
EartH-moving machinery - Loader and front loading excavator buckets - Volumetric ratings 土方机械 装载机和正铲挖掘机的铲斗 容量标定 |
China National Standards H |
English PDF |
Find out:38864Items | To Page of: First -Previous-Next -Last | [282] [283] [284] [285] [286] [287] [288] |