GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 4798.5-2007 |
Environmental conditions existing in tHe application of electric and electronic products - Section 5: Ground vehicle installations 电工电子产品应用环境条件 第5部分:地面车辆使用 |
China National Standards H |
English PDF |
GB/T 4798.4-2007 |
Environmental conditions existing in tHe application of electric and electronic products - Section 4: Stationary use at non-weather-protected locations 电工电子产品应用环境条件 第4部分:无气候防护场所固定使用 |
China National Standards H |
English PDF |
GB/T 4798.3-2007 |
Environmental conditions existing in tHe application of electric and electronic products - Section 3: Stationary use at weather-protected locations 电工电子产品应用环境条件 第3部分:有气候防护场所固定使用 |
China National Standards H |
English PDF |
GB/T 13182-2007 |
THallium-actived sodium iodide scintillator and scintillation detectors of sodium iodide(thallium) 碘化钠(铊)闪烁体和碘化钠(铊)闪烁探测器 |
China National Standards H |
English PDF |
GB 2585-2007 |
Hot-rolled steel rails for railway 铁路用热轧钢轨 |
China National Standards H |
English PDF |
GB/T 20982.3-2007 |
Textile macHinery and accessories - Weaving machines - Part 3: Parts of the machine - Vocabulary 纺织机械与附件 织机 第3部分:织机零部件 词汇 |
China National Standards H |
English PDF |
GB/T 20982.2-2007 |
Textile macHinery and accessories - Weaving machines - Part 2: Accessories - Vocabulary 纺织机械与附件 织机 第2部分:附件 词汇 |
China National Standards H |
English PDF |
GB/T 10230.2-2007 |
Tap cHangers - Part 2: Application guide 分接开关 第2部分:应用导则 |
China National Standards H |
English PDF |
GB 9706.6-2007 |
Medical electrical equipment - Part 2:Particular requirements for tHe safety of microwave therapy equipment 医用电气设备 第二部分:微波治疗设备安全专用要求 |
China National Standards H |
English PDF |
GB 10230.1-2007 |
Tap-cHangers - Part 1: Performance requirements and test methods 分接开关 第1部分:性能要求和试验方法 |
China National Standards H |
English PDF |
GB/T 5332-2007 |
MetHod of test for ignition temperature of flammable liquids and gases 可燃液体和气体引燃温度试验方法 |
China National Standards H |
English PDF |
GB/T 18294.4-2007 |
TecHnical identification method for fire - Part 4: High performance liquid chromatography analysis 火灾技术鉴定方法 第4部分:高效液相色谱法 |
China National Standards H |
English PDF |
GB/T 16172-2007 |
Test metHod for heat release rate of building materials 建筑材料热释放速率试验方法 |
China National Standards H |
English PDF |
GB/T 878-2007 |
Slotted Headless screws with shank 开槽无头螺钉 |
China National Standards H |
English PDF |
GB/T 80-2007 |
Hexagon socket set screws with cup point 内六角凹端紧定螺钉 |
China National Standards H |
English PDF |
GB/T 79-2007 |
Hexagon socket set screws with dog point 内六角圆柱端紧定螺钉 |
China National Standards H |
English PDF |
GB/T 78-2007 |
Hexagon socket set screws with cone point 内六角锥端紧定螺钉 |
China National Standards H |
English PDF |
GB/T 77-2007 |
Hexagon socket set screws with flat point 内六角平端紧定螺钉 |
China National Standards H |
English PDF |
GB/T 2673-2007 |
Hexalobular socket countersunk head screws 内六角花形沉头螺钉 |
China National Standards H |
English PDF |
GB/T 20485.21-2007 |
MetHods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer 振动与冲击传感器校准方法 第21部分:振动比较法校准 |
China National Standards H |
English PDF |
GB/T 20485.13-2007 |
MetHods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration by laser interferometry 振动与冲击传感器校准方法 第13部分: 激光干涉法冲击绝对校准 |
China National Standards H |
English PDF |
GB/T 14041.2-2007 |
Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids 液压滤芯 材料与液体相容性检验方法 |
China National Standards H |
English PDF |
GB/T 21028-2007 |
Information security tecHnology - Security techniques requirement for server 信息安全技术 服务器安全技术要求 |
China National Standards H |
English PDF |
GB/T 21026-2007 |
Specification for CHinese office software application programming interface 中文办公软件应用编程接口规范 |
China National Standards H |
English PDF |
GB/T 21024-2007 |
General specification of CHinese speech synthesis system 中文语音合成系统通用技术规范 |
China National Standards H |
English PDF |
GB/T 21023-2007 |
General specification for CHinese speech recognition system 中文语音识别系统通用技术规范 |
China National Standards H |
English PDF |
GB/T 18311.30-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - PolisH angle and fibre position on single ferrule multifibre connectors 纤维光学互连器件和无源器件 基本试验和测量程序 第3-30部分:检查和测量 单套管多芯光纤连接器抛光角度和光纤位置 |
China National Standards H |
English PDF |
GB/T 18311.26-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-26: Examinations and measurements - Measurement of tHe angular misalignment between fibre and ferrule axes 纤维光学互连器件和无源器件 基本试验和测量程序 第3-26部分:检查和测量 光纤和插针轴线间的角偏差的测量 |
China National Standards H |
English PDF |
GB/T 18311.20-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic brancHing devices 纤维光学互连器件和无源器件 基本试验和测量程序 第3-20部分:检查和测量 纤维光学分路器件的方向性 |
China National Standards H |
English PDF |
GB/T 18311.16-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spHerically polished ferrules 纤维光学互连器件和无源器件 基本试验和测量程序 第3-16部分:检查和测量 球面抛光套管端面半径 |
China National Standards H |
English PDF |
GB/T 18310.48-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-Humidity cycling 纤维光学互连器件和无源器件 基本试验和测量程序 第2-48部分:试验 温度湿度循环 |
China National Standards H |
English PDF |
GB/T 15160-2007 |
Land mobile communication system requirements using multi-cHannel access techniques without a central controller 无中心多信道选址移动通信系统体制 |
China National Standards H |
English PDF |
GB/T 15157.14-2007 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment 频率低于3MHz的印制板连接器 第14部分: 音频、视频和音像设备用低音频及视频圆形连接器详细规范 |
China National Standards H |
English PDF |
GB/T 14805.4-2007 |
Electronic data intercHange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4,Syntax release number:1) - Part 4: Syntax and service report message for batch EDI (Message type_CONTRL) 行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号:4,语法发布号:1) 第4部分: 批式电子数据交换语法和服务报告报文(报文类型为CONTRL) |
China National Standards H |
English PDF |
GB/T 14805.3-2007 |
Electronic data intercHange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4,Syntax release number:1) - Part 3: Syntax rules specific to interactive EDI 行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号:4,语法发布号:1) 第3部分: 交互式电子数据交换专用的语法规则 |
China National Standards H |
English PDF |
GB/T 14805.2-2007 |
Electronic data intercHange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4,Syntax release number:1) - Part 2: Syntax rules specific to batch EDI 行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号:4,语法发布号:1) 第2部分: 批式电子数据交换专用的语法规则 |
China National Standards H |
English PDF |
GB/T 14805.1-2007 |
Electronic data intercHange for administration,commerce andtransport (EDIFACT) - Application level syntax rules (Syntax version number: 4,Syntax release number:1) - Part 1: Syntax rules common to all parts 行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号: 4,语法发布号:1) 第1部分:公用的语法规则 |
China National Standards H |
English PDF |
GB/T 11313.4-2007 |
Radio-frequency connecters. - Part 4: R.F.coaxial connectors witH inner diameter of outer conductor 16mm(0.63in) with screw lock - Characteristic impedance 50 ohms (Type 7-16) 射频连接器 第4部分:外导体内径为16mm(0.63in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(7-16型) |
China National Standards H |
English PDF |
GB/T 20969.3-2007 |
Special environmental condition - MacHinery for plateau - Part 3: The specification of select type and acceptance check for construction machinery on plateau 特殊环境条件 高原机械 第3部分:高原型工程机械选型、验收规范 |
China National Standards H |
English PDF |
GB/T 20969.2-2007 |
Special environmental condition - MacHinery for plateau - Part 2: Requirements for construction machinery on plateau 特殊环境条件 高原机械 第2部分:高原对工程机械的要求 |
China National Standards H |
English PDF |
GB/T 20969.1-2007 |
Special environmental condition - MacHinery for plateau - Part 1: Requirements for internal combustion engines on plateau 特殊环境条件 高原机械 第1部分:高原对内燃动力机械的要求 |
China National Standards H |
English PDF |
GB/T 20991-2007 |
Personal protective equipment - Test metHods for footwear 个体防护装备 鞋的测试方法 |
China National Standards H |
English PDF |
GB/T 16556-2007 |
self-contained open-circuit compressed air breatHing apparatus 自给开路式压缩空气呼吸器 |
China National Standards H |
English PDF |
GB 21046-2007 |
PorpHyra yezoensis 条斑紫菜 |
China National Standards H |
English PDF |
GB 21045-2007 |
Large moutH bass 大口黑鲈 |
China National Standards H |
English PDF |
GB 21044-2007 |
CHinese soft-shelled turtle 中华鳖 |
China National Standards H |
English PDF |
GB/T 8243.12-2007 |
MetHods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分:采用颗粒计数法测定滤清效率和容灰量 |
China National Standards H |
English PDF |
GB/T 8243.11-2007 |
MetHods of test for full-flow lubricating oil filters for internal combustion engines - Part 11: Self-cleaning filters 内燃机全流式机油滤清器试验方法 第11部分:自净式滤清器 |
China National Standards H |
English PDF |
GB/T 7927-2007 |
MetHod of vibration measurement for walking tractors 手扶拖拉机 振动测量方法 |
China National Standards H |
English PDF |
GB/T 6809.4-2007 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 4: Pressure cHarging and air/exhaust gas ducting systems 往复式内燃机 零部件和系统术语 第4部分:增压及进排气管系统 |
China National Standards H |
English PDF |
GB/T 6229-2007 |
Test metHods for walking tractors 手扶拖拉机 试验方法 |
China National Standards H |
English PDF |
GB/T 6138.2-2007 |
Subland twist drills for Holes prior to tapping screw threads - Part 2: The types and dimensions of Subland twist drills with Morse typer shanks 攻丝前钻孔用阶梯麻花钻 第2部分:莫氏锥柄阶梯麻花钻的型式和尺寸 |
China National Standards H |
English PDF |
GB/T 6138.1-2007 |
Subland twist drills for Holes prior to tapping screw threads - Part 1: The types and dimensions of subland twist drills with cylindrical shanks 攻丝前钻孔用阶梯麻花钻 第1部分:直柄阶梯麻花钻的型式和尺寸 |
China National Standards H |
English PDF |
GB/T 6129-2007 |
TecHnical specifications for angle cutters 角度铣刀 技术条件 |
China National Standards H |
English PDF |
GB/T 6128.2-2007 |
Angle milling cutter - Part 2: THe double equal--angle cutters 角度铣刀 第2部分:对称双角铣刀 |
China National Standards H |
English PDF |
GB/T 6128.1-2007 |
Angle milling cutter - Part 1: THe single and double unequal-angle cutters 角度铣刀 第1部分:单角和不对称双角铣刀 |
China National Standards H |
English PDF |
GB/T 5343.2-2007 |
Turning tool Holders and cartridges for indexable inserts - Part 2: Dimensions and technical specifications of turning tool holders for indexable inserts 可转位车刀及刀夹 第2部分:可转位车刀型式尺寸和技术条件 |
China National Standards H |
English PDF |
GB/T 5343.1-2007 |
Turning tool Holders and cartridges for indexable inserts - Part 1: Designation 可转位车刀及刀夹 第1部分:型号表示规则 |
China National Standards H |
English PDF |
GB/T 4127.9-2007 |
Bonded abrasive products - Dimensions - Part 9: Grinding wHeels for high-pressure grinding 固结磨具 尺寸 第9部分:重负荷磨削砂轮 |
China National Standards H |
English PDF |
GB/T 4127.8-2007 |
Bonded abrasive products - Dimensions - Part 8: Grinding wHeels for deburring and fettling/snagging 固结磨具 尺寸 第8部分:去毛刺、荒磨和粗磨用砂轮 |
China National Standards H |
English PDF |
GB/T 4127.3-2007 |
Bonded abrasive products - Dimensions - Part 3: Grinding wHeels for internal cylindrical grinding 固结磨具 尺寸 第3部分:内圆磨砂轮 |
China National Standards H |
English PDF |
GB/T 4127.2-2007 |
Bonded abrasive products - Dimensions - Part 2: Grinding wHeels for centreless external cylindrical grinding 固结磨具 尺寸 第2部分:无心外圆磨砂轮 |
China National Standards H |
English PDF |
GB/T 4127.16-2007 |
Bonded abrasive products - Dimensions - Part 16: Grinding wHeels for cutting-off on hand held power tools 固结磨具 尺寸 第16部分:手持式电动工具用切割砂轮 |
China National Standards H |
English PDF |
GB/T 4127.15-2007 |
Bonded abrasive products - Dimensions - Part 15: Grinding wHeels for cutting-off on stationary or mobile cutting-off machines 固结磨具 尺寸 第15部分:固定式或移动式切割机用切割砂轮 |
China National Standards H |
English PDF |
GB/T 4127.1-2007 |
Bonded abrasive products - Dimensions - Part 1: Grinding wHeels for external cylindrical grinding between centres 固结磨具 尺寸 第1部分:外圆磨砂轮(工件装夹在顶尖间) |
China National Standards H |
English PDF |
GB/T 3464.3-2007 |
MacHine and hand taps - Part 3:Short shank machine and hand taps 机用和手用丝锥 第3部分:短柄机用和手用丝锥 |
China National Standards H |
English PDF |
GB/T 3464.1-2007 |
MacHine and hand taps - Part 1: Plain parallel shank machine and hand taps 机用和手用丝锥 第1部分:通用柄机用和手用丝锥 |
China National Standards H |
English PDF |
GB/T 3044-2007 |
CHemical analysis methods for white fused alumina and pink fused alumina 白刚玉、铬刚玉 化学分析方法 |
China National Standards H |
English PDF |
GB/T 2778-2007 |
Power take-off pulley for agricultural tractors - PeripHeral speed and width 农业拖拉机动力输出皮带轮 圆周速度和宽度 |
China National Standards H |
English PDF |
GB/T 2490-2007 |
Bonded abrasive products - Hardness grade measurement 固结磨具 硬度检验 |
China National Standards H |
English PDF |
GB/T 20972.1-2007 |
Petroleum and natural gas industries - Material for use in H2S - containing environments in oil and gas production - part 1: General principles for selection of cracking-resistant materials 石油天然气工业 油气开采中用于含硫化氢环境的材料 第1部分:选择抗裂纹材料的一般原则 |
China National Standards H |
English PDF |
GB/T 20961-2007 |
Single-rope mine drum Hoist 单绳缠绕式矿井提升机 |
China National Standards H |
English PDF |
GB/T 20960-2007 |
NC Horizontal turret 数控卧式转塔刀架 |
China National Standards H |
English PDF |
GB/T 20958.2-2007 |
Test conditions for CNC bed-type milling macHines - Testing of the accuracy - Part 2: Milling machines with vertical spindle 数控床身铣床检验条件 精度检验 第2部分: 立式铣床 |
China National Standards H |
English PDF |
GB/T 20958.1-2007 |
Test conditions for CNC bed-type milling macHines - Testing of the accuracy - Part 1: Milling machines with horizontal spindle 数控床身铣床检验条件 精度检验 第1部分: 卧式铣床 |
China National Standards H |
English PDF |
GB/T 20957.7-2007 |
Test conditions for precision macHining centres - Part 7: Accuracy of a finished test piece 精密加工中心检验条件 第7部分:精加工试件精度检验 |
China National Standards H |
English PDF |
GB/T 20957.5-2007 |
Test conditions of precision macHining centres - Part 5: Tests for accuracy and repeatability of positioning of work-holding pallets 精密加工中心检验条件 第5部分:工件夹持托板的定位精度和重复定位精度检验 |
China National Standards H |
English PDF |
GB/T 20957.2-2007 |
Test conditions for macHining centres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis) 精密加工中心检验条件 第2部分:立式或带垂直主回转轴的万能主轴头机床 几何精度检验(垂直Z轴) |
China National Standards H |
English PDF |
GB/T 20957.1-2007 |
Test conditions for precision macHining centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z axis) 精密加工中心检验条件 第1部分:卧式和带附加主轴头机床几何精度检验(水平Z轴) |
China National Standards H |
English PDF |
GB/T 20956-2007 |
Printing macHinery - Safety requirements of the design and construction for cutting machines 印刷机械 切纸机设计及结构安全规则 |
China National Standards H |
English PDF |
GB/T 20953-2007 |
Tractors and macHinery for agriculture and forestry - Determination of burning behavior of cab interior materials 农林拖拉机和机械 驾驶室内饰材料燃烧特性的测定 |
China National Standards H |
English PDF |
GB/T 20949-2007 |
Prescription for installation of tHe lighting and light-signalling devices for wheeled agricultural and forestry tractors 农林轮式拖拉机 照明和灯光信号装置的安装规定 |
China National Standards H |
English PDF |
GB/T 20947-2007 |
SHort-link chain for lifting purposes - Grade T,(types T,DAT and DT),fine-tolerance hoist chain 起重用短环链 T级(T、DAT和DT型)高精度葫芦链 |
China National Standards H |
English PDF |
GB/T 20946-2007 |
sHort link chain for lifting purposes - General conditions of acceptance 起重用短环链 验收总则 |
China National Standards H |
English PDF |
GB/T 15833-2007 |
Test metHods for forestry wheeled tractors and crawler tractors 林业轮式和履带拖拉机 试验方法 |
China National Standards H |
English PDF |
GB/T 15832-2007 |
General requirement of forestry wHeeled tractors and crawler tractors 林业轮式和履带拖拉机 通用技术条件 |
China National Standards H |
English PDF |
GB/T 15112-2007 |
SHaft sinking winch 凿井绞车 |
China National Standards H |
English PDF |
GB/T 1147.2-2007 |
Small and medium power internal combustion engines - Part 2: Test metHods 中小功率内燃机 第2部分:试验方法 |
China National Standards H |
English PDF |
GB/T 1124.2-2007 |
Convex and concave milling cutters - Part 2:TecHnical specifications 凸凹半圆铣刀 第2部分: 技术条件 |
China National Standards H |
English PDF |
GB/T 1124.1-2007 |
Convex and concave milling cutters - Part1:THe types and dimensions 凸凹半圆铣刀 第1部分:型式和尺寸 |
China National Standards H |
English PDF |
GB/T 11835-2007 |
Rock wool , slag wool and it’s products for tHermal insulation 绝热用岩棉、矿渣棉及其制品 |
China National Standards H |
English PDF |
GB/Z 20996.3-2007 |
Performance of High-voltage direct current(HVDC) systems - Part 3: Dynamic conditions 高压直流系统的性能 第3部分:动态 |
China National Standards H |
English PDF |
GB/Z 20996.2-2007 |
Performance of High-voltage direct current(HVDC)systems - Part 2: Faults and switching 高压直流系统的性能 第2部分:故障和操作 |
China National Standards H |
English PDF |
GB/Z 20996.1-2007 |
Performance of High-voltage direct current(HVDC) systems - Part 1: Steady-state conditions 高压直流系统的性能 第1部分:稳态 |
China National Standards H |
English PDF |
GB/T 9652.2-2007 |
Test code of control systems for Hydraulic turbines 水轮机控制系统试验 |
China National Standards H |
English PDF |
GB/T 9652.1-2007 |
Specifications of control systems for Hydraulic turbines 水轮机控制系统技术条件 |
China National Standards H |
English PDF |
GB/T 20995-2007 |
Power electronics for electrical transmission and distribution systems - Testing of tHyristor valves for static VAR compensators 输配电系统的电力电子技术 静止无功补偿装置用晶闸管阀的试验 |
China National Standards H |
English PDF |
GB/T 20994-2007 |
SHunt capacitors and AC filter capacitors for HVDC transmission systems 高压直流输电系统用并联电容器及交流滤波电容器 |
China National Standards H |
English PDF |
GB/T 20992-2007 |
General requirements for tHyristors for HVDC transmission 高压直流输电用普通晶闸管的一般要求 |
China National Standards H |
English PDF |
GB/T 20990.1-2007 |
THyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing 高压直流输电晶闸管阀 第1部分:电气试验 |
China National Standards H |
English PDF |
Find out:38864Items | To Page of: First -Previous-Next -Last | [300] [301] [302] [303] [304] [305] [306] |