GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 21495-2008 |
AnImal and vegetable fats and oils - Determination of polyunsaturated fatty acid with a cis,cis 1,4-diene structure 动植物油脂 具有顺,顺1,4-二烯结构的多不饱和脂肪酸的测定 |
China National Standards I |
English PDF |
GB/T 21494-2008 |
Low temperature desolventIzed edible soybean meal 低温食用豆粕 |
China National Standards I |
English PDF |
GB/T 21493-2008 |
DetermInation of phosphatidylethanolamine, phosphatidylinositol and phosphatidycholine of soybean phospholipids 大豆磷脂中磷脂酰胆碱、磷脂酰乙醇胺、磷脂酰肌醇的测定 |
China National Standards I |
English PDF |
GB/T 549-2008 |
Electro-welded anchor chaIns 电焊锚链 |
China National Standards I |
English PDF |
GB/T 3475-2008 |
RequIrement and test method for speed governing system of marine diesel engine 船用柴油机调速系统技术要求和试验方法 |
China National Standards I |
English PDF |
GB/T 21485-2008 |
ShIps and marine technology - Shipboard plans for fire protection,life-saving appliances and means of escape 船舶和海上技术 船上消防、救生设备及逃生路线布置图 |
China National Standards I |
English PDF |
GB/T 21484-2008 |
ShIpbuilding - Cable stoppers 造船 掣链器 |
China National Standards I |
English PDF |
GB/T 11699-2008 |
Small craft wIth inboard engine - Propeller shaft ends and bosses 舷内机小艇 螺旋桨轴端和桨毂 |
China National Standards I |
English PDF |
GB/T 21487.1-2008 |
RotatIng shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration 转轴振动测量系统 第1部分:径向振动的相对和绝对检测 |
China National Standards I |
English PDF |
GB/T 21486-2008 |
HydraulIc fluid power - Filter elements - Sequence of tests for verifying performance characteristics 液压滤芯 检验性能特性的试验程序 |
China National Standards I |
English PDF |
GB/T 1182-2008 |
GeometrIcal Product Specifications(GPS) - Geometrical tolerancing - Tolerances of form,orientation,location and run-out 产品几何技术规范(GPS)几何公差 形状、方向、位置和跳动公差标注 |
China National Standards I |
English PDF |
GB/T 8413-2008 |
MarIne self-priming centrifugal-oil pump CZY-type CZY型船用自吸离心式油泵 |
China National Standards I |
English PDF |
GB/T 4447-2008 |
Sea-goIng vessels-Windlasses and anchor capstans 海船用起锚机和起锚绞盘 |
China National Standards I |
English PDF |
GB/T 3893-2008 |
ShIpbuilding and marine structures - Deck machinery - Vocabulary and symbols 造船及海上结构物 甲板机械 术语和符号 |
China National Standards I |
English PDF |
GB/T 21483-2008 |
MarIne water jet pump 船用水喷射泵 |
China National Standards I |
English PDF |
GB/T 21482-2008 |
ShIps and marine technology - Pneumatic rubber fenders 船舶与海上技术 充气橡胶靠球 |
China National Standards I |
English PDF |
GB/T 21481.2-2008 |
ShIps and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation 船舶与海上技术 船舶和海上结构物上生活用水供应 第2部分: 计算方法 |
China National Standards I |
English PDF |
GB/T 21481.1-2008 |
ShIps and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design 船舶与海上技术 船舶和海上结构物上生活用水供应 第1部分: 规划和设计 |
China National Standards I |
English PDF |
GB/T 21480-2008 |
ShIps and marine technology - Drain facilities from oil and water tanks 船舶与海上技术 油舱及水舱放泄装置 |
China National Standards I |
English PDF |
GB/T 21479.2-2008 |
ShIps and marine technology-Propulsion plants for ships - Part 2:Vocabulary for controllable-pitch propeller plants 船舶与海上技术 船用推进装置 第2部分: 可调螺距螺旋桨装置词汇 |
China National Standards I |
English PDF |
GB/T 21479.1-2008 |
ShIps and marine technology - Propulsion plants for ships - Part 1: Vocabulary for geometry of propellers 船舶与海上技术 船用推进装置 第1部分: 螺旋桨几何学词汇 |
China National Standards I |
English PDF |
GB/T 21478-2008 |
ShIps and marine technology - Marine environment protection - Terminology relating to oil spill response 船舶与海上技术 海上环境保护 溢油处理相关术语 |
China National Standards I |
English PDF |
GB/T 21477-2008 |
ShIps and marine technology - Fire resistance of hose assemblies - Test methods 船舶及海上技术 软管组件的耐火性能 试验方法 |
China National Standards I |
English PDF |
GB/T 21476-2008 |
ShIps and marine technology - Fire resistance of hose assemblies - Requirements for the test bench 船舶与海上技术 软管组件的耐火性能 试验台要求 |
China National Standards I |
English PDF |
GB/T 21475-2008 |
ShIpbuilding - Colours of indicator lights 造船 指示灯颜色 |
China National Standards I |
English PDF |
GB/T 16301-2008 |
Measurement and evaluatIon of vibration severity for marine engine-room auxiliaries 船舶机舱辅机振动烈度的测量和评价 |
China National Standards I |
English PDF |
GB/T 14090-2008 |
TermInology for offshore oil and gas development engineering 海上油气开发工程术语 |
China National Standards I |
English PDF |
GB/T 13854-2008 |
Jet-pIpe electro-hydraulic servo valve 射流管电液伺服阀 |
China National Standards I |
English PDF |
GB/T 12929-2008 |
MarIne reciprocating air compressor for high pressure 船用高压活塞空气压缩机 |
China National Standards I |
English PDF |
GB/T 12928-2008 |
MarIne reciprocating air compressor for medium pressure and low pressure 船用中低压活塞空气压缩机 |
China National Standards I |
English PDF |
GB/T 11865-2008 |
MarIne centrifugal fans 船用离心通风机 |
China National Standards I |
English PDF |
GB/T 11864-2008 |
MarIne axial flow fans 船用轴流通风机 |
China National Standards I |
English PDF |
GB/T 11800-2008 |
MarIne explosion-proof type axial flow fans 船用防爆轴流通风机 |
China National Standards I |
English PDF |
GB/T 11799-2008 |
MarIne explosion-proof type centrifugal fans 船用防爆离心通风机 |
China National Standards I |
English PDF |
GB/T 11035-2008 |
MarIne electric two spindle screw pump 船用电动双螺杆泵 |
China National Standards I |
English PDF |
GB/T 10832-2008 |
General specIfication for centrifigual and vortex pumps of ship 船用离心泵、旋涡泵通用技术条件 |
China National Standards I |
English PDF |
GB/T 5612-2008 |
Code for representIng cast iron 铸铁牌号表示方法 |
China National Standards I |
English PDF |
GB/T 20485.22-2008 |
Methods for the calIbration of vibration and shock transducers - Part 22: Shock calibration by comparison to a reference transducer 振动与冲击传感器校准方法 第 22部分:冲击比较法校准 |
China National Standards I |
English PDF |
GB/T 20485.12-2008 |
Methods for the calIbration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method 振动与冲击传感器校准方法 第12部分:互易法振动绝对校准 |
China National Standards I |
English PDF |
GB/T 20485.1-2008 |
Methods for the calIbration of vibration and shock transducers - Part 1: Basic concepts 振动与冲击传感器校准方法 第1部分: 基本概念 |
China National Standards I |
English PDF |
GB/T 3632-2008 |
Sets of torshear type hIgh strength bolt hexagon nut and plain washer for steel structures 钢结构用扭剪型高强度螺栓连接副 |
China National Standards I |
English PDF |
GB/T 7302-2008 |
Feed addItive - Folic acid 饲料添加剂 叶酸 |
China National Standards I |
English PDF |
GB/T 7295-2008 |
Feed addItive - vitamin B1 (thiamine hydrochloride) 饲料添加剂 维生素B1(盐酸硫胺) |
China National Standards I |
English PDF |
GB/T 21517-2008 |
Feed addItive - Lutein 饲料添加剂 叶黄素 |
China National Standards I |
English PDF |
GB/T 21516-2008 |
Feed addItive - 10% β-Apo-8’-carotenoic ethyl ester (powder) 饲料添加剂 10%β-阿朴-8’-胡萝卜素酸乙酯(粉剂) |
China National Standards I |
English PDF |
GB/T 21515-2008 |
Feed addItive - Natural betaine 饲料添加剂 天然甜菜碱 |
China National Standards I |
English PDF |
GB/T 21514-2008 |
DetermInation of the content of fatty acids in feeds 饲料中脂肪酸含量的测定 |
China National Standards I |
English PDF |
GB/T 21513-2008 |
AnImal feed salt 畜牧用盐 |
China National Standards I |
English PDF |
GB/T 7813-2008 |
RollIng bearings - Split type plummer block housings - Boundary dimensions 滚动轴承 剖分立式轴承座 外形尺寸 |
China National Standards I |
English PDF |
GB/T 6320-2008 |
MechanIcal dial comparators 杠杆齿轮比较仪 |
China National Standards I |
English PDF |
GB/T 6060.3-2008 |
Surface roughness comparIson specimen - Part 3:Spark-eroded,shot-blasted,grit-blasted,lapped,filed and polished surface 表面粗糙度比较样块 第3部分:电火花、抛(喷)丸、喷砂、研磨、锉、抛光加工表面 |
China National Standards I |
English PDF |
GB/T 5859-2008 |
RollIng bearings - Self -aligning thrust roller bearings - Boundary dimensions 滚动轴承 推力调心滚子轴承 外形尺寸 |
China National Standards I |
English PDF |
GB/T 304.9-2008 |
SpherIcal plain bearings - General technical regulations 关节轴承 通用技术规则 |
China National Standards I |
English PDF |
GB/T 300-2008 |
RollIng bearings - Four row tapered roller bearings - Boundary dimensions 滚动轴承 四列圆锥滚子轴承 外形尺寸 |
China National Standards I |
English PDF |
GB/T 299-2008 |
RollIng bearings - Double row tapered roller bearings - Boundary dimensions 滚动轴承 双列圆锥滚子轴承 外形尺寸 |
China National Standards I |
English PDF |
GB/T 271-2008 |
RollIng bearings - Classification 滚动轴承 分类 |
China National Standards I |
English PDF |
GB/T 2514-2008 |
HydraulIc fluid power - Four-port directional control valves - Mounting surfaces 液压传动 四油口方向控制阀安装面 |
China National Standards I |
English PDF |
GB/T 21472-2008 |
StaInless steel bends and tees for the food industry 食品工业用不锈钢弯头和三通 |
China National Standards I |
English PDF |
GB/T 21471-2008 |
MachIning allowances and tolerances for steel open die forgings on hammer - Shafts 锤上钢质自由锻件机械加工余量与公差 轴类 |
China National Standards I |
English PDF |
GB/T 21470-2008 |
MachIning allowances and tolerances for steel open die forgings on hammer - Disks, columns, rings and seamless cylindrical sleeves 锤上钢质自由锻件机械加工余量与公差 盘、柱、环、筒类 |
China National Standards I |
English PDF |
GB/T 21469-2008 |
MachIning allowances and tolerances for steel open die forgings on hammer - General requirement 锤上钢质自由锻件机械加工余量与公差 一般要求 |
China National Standards I |
English PDF |
GB/T 21468-2008 |
Pallet stackers and hIgh-lift platform trucks - Stability tests 托盘堆垛车和高起升平台堆垛车 稳定性试验 |
China National Standards I |
English PDF |
GB/T 21467-2008 |
Industrial trucks operating in special condition of stacking with mast titled forward - Additional stability test 工业车辆在门架前倾的特定条件下堆垛作业 附加稳定性试验 |
China National Standards I |
English PDF |
GB/T 21465-2008 |
TermInology for valves 阀门 术语 |
China National Standards I |
English PDF |
GB/T 21466.3-2008 |
HydrodynamIc plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters 稳态条件下流体动压径向滑动轴承 圆形滑动轴承 第3部分:许用的运行参数 |
China National Standards I |
English PDF |
GB/T 21466.2-2008 |
HydrodynamIc plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 2: Functions used in the calculation procedure 稳态条件下流体动压径向滑动轴承 圆形滑动轴承 第2部分:计算过程中所用函数 |
China National Standards I |
English PDF |
GB/T 21466.1-2008 |
HydrodynamIc plain journal bearings under steady-state conditions - Circular cylindrical bearings -- Part 1: Calculation procedure 稳态条件下流体动压径向滑动轴承 圆柱滑动轴承 第1部分:计算过程 |
China National Standards I |
English PDF |
GB/T 14693-2008 |
Non-destructIve testing - Symbolic representation on drawings 无损检测 符号表示法 |
China National Standards I |
English PDF |
GB/T 19582.3-2008 |
Modbus Industrial automation network specification - Part 3: Modbus protocol implementation guide over TCP/IP 基于Modbus协议的工业自动化网络规范 第3部分:Modbus协议在TCP/IP上的实现指南 |
China National Standards I |
English PDF |
GB/T 19582.2-2008 |
Modbus Industrial automation network specification-Part 2:Modbus protocol implementation guide over serial link 基于Modbus协议的工业自动化网络规范 第2部分:Modbus协议在串行链路上的实现指南 |
China National Standards I |
English PDF |
GB/T 19582.1-2008 |
Modbus Industrial automation network specification - Part 1: Modbus application protocol 基于Modbus协议的工业自动化网络规范 第1部分:Modbus应用协议 |
China National Standards I |
English PDF |
GB/T 21474-2008 |
GuIdeline for the assessment on the reuse and recycling system of waste electrical and electronic equipment 废弃电子电气产品再使用及再生利用体系评价导则 |
China National Standards I |
English PDF |
GB 18447.1-2008 |
Safety requIrements for tractors - Part 1:Wheeled tractors 拖拉机 安全要求 第1部分:轮式拖拉机 |
China National Standards I |
English PDF |
GB/T 4649-2008 |
Ethylene glycol for Industrial Use-Specification 工业用乙二醇 |
China National Standards I |
English PDF |
GB/T 21473-2008 |
TInting system colorant 调色系统用色浆 |
China National Standards I |
English PDF |
GB/T 21464-2008 |
Rubber - DetermInation of 5-Ethylidenenorbornene(ENB)or Dicyclopentadiene(DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers 橡胶 乙烯-丙烯-二烯烃(EPDM)三元共聚物中5-乙叉降冰片烯(ENB)或双环戊二烯(DCPD)含量的测定 |
China National Standards I |
English PDF |
GB/T 21463-2008 |
Rubber-Polychloroprene latex - DetermInation of alkalinity 氯丁二烯橡胶胶乳碱度的测定 |
China National Standards I |
English PDF |
GB/T 21462-2008 |
EvaluatIon procedure of Chloroprene Rubber(CR) 氯丁二烯橡胶(CR) 评价方法 |
China National Standards I |
English PDF |
GB/T 21461.2-2008 |
PlastIcs - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards I |
English PDF |
GB/T 21460.2-2008 |
PlastIcs - Styrene/acrylonitrile(SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards I |
English PDF |
GB/T 14571.4-2008 |
Ethylene glycol for Industrial use - Determination of ultraviolet transmittance - Ultraviolet spectrophotometric method 工业用乙二醇紫外透光率的测定 紫外分光光度法 |
China National Standards I |
English PDF |
GB/T 14571.3-2008 |
Ethylene glycol for Industrial use - Determination of content of total aldehydes present - Spectrophotometric method 工业用乙二醇中醛含量的测定 分光光度法 |
China National Standards I |
English PDF |
GB/T 14563-2008 |
SpecIfication and test method of Kaolin clay 高岭土及其试验方法 |
China National Standards I |
English PDF |
GB/T 12670-2008 |
Polypropylene (PP) resIn 聚丙烯(PP)树脂 |
China National Standards I |
English PDF |
GB/T 21458-2008 |
MobIle cranes - Presentation of rated capacity charts 流动式起重机 额定起重量图表 |
China National Standards I |
English PDF |
GB/T 21457-2008 |
Cranes and related equIpment - Accuracy requirements for measuring parameters during testing 起重机和相关设备 试验中参数的测量精度要求 |
China National Standards I |
English PDF |
GB 21454-2008 |
The mInimum allowable values of the IPLV and energy efficiency grades for multi-connected air-condition(heat pump) unit 多联式空调(热泵)机组能效限定值及能源效率等级 |
China National Standards I |
English PDF |
GB/T 21437.2-2008 |
Road vehIcles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only 道路车辆 由传导和耦合引起的电骚扰 第2部分:沿电源线的电瞬态传导 |
China National Standards I |
English PDF |
GB/T 21436-2008 |
ParkIng distance monitoring & warning device for motovehicle 汽车泊车测距警示装置 |
China National Standards I |
English PDF |
GB/T 6099-2008 |
Test method for maturIty coefficient of cotton fibres 棉纤维成熟系数试验方法 |
China National Standards I |
English PDF |
GB/T 21499-2008 |
RIce - Determinaton of the potential milling yield from paddy and from husked rice 大米 稻谷和糙米潜在出米率的测定 |
China National Standards I |
English PDF |
GB/T 3410.1-2008 |
Instrument for dam monitoring joint meter - Part 1: Unbonded elastic wire resistance joint meter 大坝监测仪器 测缝计 第1部分:差动电阻式测缝计 |
China National Standards I |
English PDF |
GB/T 3408.1-2008 |
Instrument for dam monitoring strain meter - Part 1: Unbonded elastic wire resistance strain meter 大坝监测仪器 应变计 第1部分:差动电阻式应变计 |
China National Standards I |
English PDF |
GB/T 21444-2008 |
Naked carp of QInghai lake 青海湖裸鲤 |
China National Standards I |
English PDF |
GB/T 21441-2008 |
OlIve flounder 牙鲆 |
China National Standards I |
English PDF |
GB/T 21440.1-2008 |
Instument for dam monitoring settlement gauge - Part 1: Hydraulic overflow settlement gauge 大坝监测仪器 沉降仪 第1部分:水管式沉降仪 |
China National Standards I |
English PDF |
GB/T 16872-2008 |
Farrer’s scallop - SeedlIng 栉孔扇贝 苗种 |
China National Standards I |
English PDF |
GB/T 594-2008 |
MarIne forged steel male thread stop valves 船用外螺纹锻钢截止阀 |
China National Standards I |
English PDF |
GB/T 5744-2008 |
MarIne quick-closing valves 船用快关阀 |
China National Standards I |
English PDF |
GB/T 4450-2008 |
MarIne blank steel flanges 船用盲板钢法兰 |
China National Standards I |
English PDF |
Find out:54769Items | To Page of: First -Previous-Next -Last | [420] [421] [422] [423] [424] [425] [426] |