GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 16754-2021 |
Safety of machInery—Emergency stop function—Principles for design 机械安全 急停功能 设计原则 |
China National Standards I |
English PDF |
GB/T 16458-2021 |
TermInology for abrasives and abrasive products 磨料磨具术语 |
China National Standards I |
English PDF |
GB/T 16137-2021 |
Methods for estImation of examinee’s organ doses in X-ray diagnosis X射线诊断中受检者器官剂量的估算方法 |
China National Standards I |
English PDF |
GB/T 15972.47-2021 |
SpecIfications for optical fibre test method - Part 47: Measurement methods and test procedures for transmission characteristics - Macrobending loss 光纤试验方法规范 第47部分:传输特性的测量方法和试验程序 宏弯损耗 |
China National Standards I |
English PDF |
GB/T 15765-2021 |
HermetIc motor-compressors for room air conditioners 房间空气调节器用全封闭型电动机-压缩机 |
China National Standards I |
English PDF |
GB/T 15242.4-2021 |
DImensions series of rod and piston dynamic seals for hydraulic cylinders-Part 4:Dimensions and tolerances of bearing rings groove 液压缸活塞和活塞杆动密封装置尺寸系列 第4部分:支承环安装沟槽尺寸系列和公差 |
China National Standards I |
English PDF |
GB/T 15242.3-2021 |
DImensions series of rod and piston dynamic seals for hydraulic cylinders-Part 3:Dimensions and tolerances of groove for co-axial seals 液压缸活塞和活塞杆动密封装置尺寸系列 第3部分:同轴密封件沟槽尺寸系列和公差 |
China National Standards I |
English PDF |
GB/T 14949.5-2021 |
Manganese ores一DetermInation of titanium content一Diantipyrylmethane spectrophotometric method 锰矿石 钛含量的测定 二安替吡啉甲烷分光光度法 |
China National Standards I |
English PDF |
GB/T 14949.12-2021 |
Manganese ores - DetermInation of combined water content - Gravimetric method 锰矿石 化合水含量的测定 重量法 |
China National Standards I |
English PDF |
GB/T 14230-2021 |
Test method of tooth bendIng strength for gear load capacity 齿轮弯曲疲劳强度试验方法 |
China National Standards I |
English PDF |
GB/T 14229-2021 |
Test method of surface contact strength for gear load capacIty 齿轮接触疲劳强度试验方法 |
China National Standards I |
English PDF |
GB/T 14146-2021 |
Test method for carrIer concentration of silicon epitaxial layers - Capacitance-voltage method 硅外延层载流子浓度的测试 电容-电压法 |
China National Standards I |
English PDF |
GB/T 13469-2021 |
EconomIcal operation for centrifugal,mixed flow and axial flow pump systems 离心泵、混流泵与轴流泵系统经济运行 |
China National Standards I |
English PDF |
GB/T 13345-2021 |
OIl film bearing for flat rolling mill 板带轧机轧辊油膜轴承 |
China National Standards I |
English PDF |
GB/T 13173-2021 |
Surface actIve agents - Test methods for detergents 表面活性剂 洗涤剂试验方法 |
China National Standards I |
English PDF |
GB/T 13163.2-2021 |
RadIation protection instrumentation—Radon and radon decay product measuring instruments—Part 2:Specific requirements for 222Rn and 220Rn measuring instruments 辐射防护仪器 氡及氡子体测量仪 第2部分:222Rn和220Rn测量仪的特殊要求 |
China National Standards I |
English PDF |
GB/T 12807-2021 |
Laboratory glassware-Graduated pIpettes 实验室玻璃仪器 分度吸量管 |
China National Standards I |
English PDF |
GB/T 12773-2021 |
Valve steel and superalloy bars for Internal combustion engines 内燃机气阀用钢及合金棒材 |
China National Standards I |
English PDF |
GB/T 12719-2021 |
ExploratIon specification of hydrogeology and engineering geology in mining areas 矿区水文地质工程地质勘查规范 |
China National Standards I |
English PDF |
GB/T 12703.2-2021 |
TextIles - Test methods for electrostatic propensity - Part 2: Test method using manual friction 纺织品 静电性能试验方法 第2部分:手动摩擦法 |
China National Standards I |
English PDF |
GB/T 12703.1-2021 |
TextIles - Test methods for electrostatic propensity - Part 1: Test method using corona charging 纺织品 静电性能试验方法 第1部分:电晕充电法 |
China National Standards I |
English PDF |
GB/T 12604.7-2021 |
Non-destructIve testing - Terminology - Leak testing 无损检测 术语 泄漏检测 |
China National Standards I |
English PDF |
GB/T 12604.6-2021 |
Non-destructIve testing—Terminology—Eddy current testing 无损检测 术语 涡流检测 |
China National Standards I |
English PDF |
GB/T 12363-2021 |
ClassIfication of forging functions 锻件功能分类 |
China National Standards I |
English PDF |
GB/T 12265-2021 |
Safety of machInery—Minimum gaps to avoid crushing of parts of the human body 机械安全 防止人体部位挤压的最小间距 |
China National Standards I |
English PDF |
GB/T 12190-2021 |
Method for measurIng the shielding effectiveness of electromagnetic shielding enclosures 电磁屏蔽室屏蔽效能的测量方法 |
China National Standards I |
English PDF |
GB/T 11362-2021 |
Synchronous belt drIves—Calculation of power rating and drive center distance with belts pitch codes MXL,XXL,XL,L,H,XH and XXH 同步带传动 节距型号MXL,XXL,XL,L,H,XH和XXH梯形齿同步带额定功率和传动中心距计算 |
China National Standards I |
English PDF |
GB/T 11344-2021 |
Non-destructIve testing—Ultrasonic thickness measurement 无损检测 超声测厚 |
China National Standards I |
English PDF |
GB/T 11270.2-2021 |
SuperabrasIve products—Diamond circular saw blade—Part 2:Sintered saw blades 超硬磨料制品 金刚石圆锯片 第2部分:烧结锯片 |
China National Standards I |
English PDF |
GB/T 11270.1-2021 |
SuperabrasIve products-Diamond circular saw blade-Part 1:Welded saw blades 超硬磨料制品 金刚石圆锯片 第1部分:焊接锯片 |
China National Standards I |
English PDF |
GB/T 10067.36-2021 |
BasIc specification for electroheating and electromagnetic processing installations—Part 36:Induction through-heating installations 电热和电磁处理装置基本技术条件 第36部分:感应透热装置 |
China National Standards I |
English PDF |
GB/T 10066.32-2021 |
Test methods for electroheatIng and electromagnetic processing installations-Part 32:Induction through-heating installations 电热和电磁处理装置的试验方法 第32部分:感应透热装置 |
China National Standards I |
English PDF |
GB/T 9966.9-2021 |
Test methods for natural stone—Part 9: DetermInation of the dynamic modulus of elasticity by measuring the fundamental resonance frequency 天然石材试验方法 第9部分:通过测量共振基本频率测定动力弹性模数 |
China National Standards I |
English PDF |
GB/T 9966.13-2021 |
Test methods for natural stone—Part 13:DetermInation of water absorption coefficient by capillarity 天然石材试验方法 第13部分:毛细吸水系数的测定 |
China National Standards I |
English PDF |
GB/T 9966.11-2021 |
Test methods for natural stone—Part 11: DetermInation of resistance to ageing by cold and thermal shock 天然石材试验方法 第11部分:激冷激热加速老化强度测定 |
China National Standards I |
English PDF |
GB/T 9481-2021 |
AxIal-flow pump of medium-small size 中小型轴流泵 |
China National Standards I |
English PDF |
GB/T 8366-2021 |
ResIstance welding—Resistance welding equipment—Mechanical and electrical requirements 电阻焊 电阻焊设备 机械和电气要求 |
China National Standards I |
English PDF |
GB/T 8243.12-2021 |
Methods of test for full-flow lubrIcating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分:颗粒计数法滤清效率和容灰量 |
China National Standards I |
English PDF |
GB/T 8152.15-2021 |
Methods for chemIcal analysis of lead concentrates—Part 15:Determination of soluble lead content—Flame atomic absorption spectrometry 铅精矿化学分析方法 第15部分:可溶性铅含量的测定 火焰原子吸收光谱法 |
China National Standards I |
English PDF |
GB/T 7925-2021 |
NC recIprocating traveling type wire electrical-discharge machines—Parameters 数控往复走丝电火花线切割机床 参数 |
China National Standards I |
English PDF |
GB/T 7739.4-2021 |
Methods for chemIcal analysis of gold concentrates—Part 4:Determination of copper content 金精矿化学分析方法 第4部分:铜量的测定 |
China National Standards I |
English PDF |
GB/T 6577-2021 |
Types,dImensions and tolerances of groove for seals with bearing rings for hydraulic cylinders piston 液压缸活塞用带支承环密封沟槽型式、尺寸和公差 |
China National Standards I |
English PDF |
GB/T 6546-2021 |
Corrugated fIbreboard—Determination of edgewise crush resistance 瓦楞纸板 边压强度的测定 |
China National Standards I |
English PDF |
GB/T 6490-2021 |
Water-turbIne pump 水轮泵 |
China National Standards I |
English PDF |
GB/T 6113.103-2021 |
SpecIfication for radio disturbance and immunity measuring apparatus and methods—Part 1-3:Radio disturbance and immunity measuring apparatus—Ancillary equipment—Disturbances power 无线电骚扰和抗扰度测量设备和测量方法规范 第1-3部分:无线电骚扰和抗扰度测量设备 辅助设备 骚扰功率 |
China National Standards I |
English PDF |
GB/T 5900.1-2021 |
MachIne tools—Connecting dimensions of spindle noses and work holding chucks—Part 1: Conical connection 机床 主轴端部与卡盘连接尺寸 第1部分:圆锥连接 |
China National Standards I |
English PDF |
GB/T 4930-2021 |
MIcrobeam analysis—Electron probe microanalysis—Guidelines for the specification of certified reference materials (CRMs) 微束分析 电子探针显微分析 标准样品技术条件导则 |
China National Standards I |
English PDF |
GB/T 4893.1-2021 |
Test of surface coatIngs of furniture—Part 1: Determination of surface resistance to cold liquids 家具表面漆膜理化性能试验 第1部分:耐冷液测定法 |
China National Standards I |
English PDF |
GB/T 4798.2-2021 |
ClassIfication of environmental conditions—Classification of groups of environmental parameters and their severities—Part 2:Transportation and handling 环境条件分类 环境参数组分类及其严酷程度分级 第2部分:运输和装卸 |
China National Standards I |
English PDF |
GB/T 4787.1-2021 |
GradIng capacitors for high-voltage alternating current circuit-breakers—Part 1:General 高压交流断路器用均压电容器 第1部分:总则 |
China National Standards I |
English PDF |
GB/T 3480.5-2021 |
CalculatIon of load capacity of spur and helical gears—Part 5:Strength and quality of materials 直齿轮和斜齿轮承载能力计算 第5部分:材料的强度和质量 |
China National Standards I |
English PDF |
GB/T 2424.6-2021 |
EnvIronmental testing-Part 3:Supporting documentation and guidance- Confirmation of the performance of temperature/humidity chambers 环境试验 第3部分:支持文件及导则 温度/湿度试验箱性能确认 |
China National Standards I |
English PDF |
GB/T 2424.5-2021 |
EnvIronmental testing—Part 3:Supporting documentation and guidance—Confirmation of the performance of temperature chambers 环境试验 第3部分:支持文件及导则 温度试验箱性能确认 |
China National Standards I |
English PDF |
GB/T 2423.38-2021 |
EnvIronmental testing-Part 2:Test methods-Test R:Water test method and guidance 环境试验 第2部分:试验方法 试验R:水试验方法和导则 |
China National Standards I |
English PDF |
GB/T 2423.33-2021 |
EnvIronmental testing - Part 2: Test methods - Test Kca: High concentration sulfur dioxid 环境试验 第2部分:试验方法 试验Kca:高浓度二氧化硫试验 |
China National Standards I |
English PDF |
GB/T 2423.18-2021 |
EnvIronmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic(sodium chloride solution) 环境试验 第2部分:试验方法 试验Kb:盐雾,交变(氯化钠溶液) |
China National Standards I |
English PDF |
GB/T 2351-2021 |
FluId power systems and components-Outside diameters of tubes and inside diameters of hoses 流体传动系统及元件 硬管外径和软管内径 |
China National Standards I |
English PDF |
GB/T 2076-2021 |
Indexable inserts for cutting tools—Designation 切削刀具用可转位刀片 型号表示规则 |
China National Standards I |
English PDF |
GB/T 1551-2021 |
Test method for measurIng resistivity of monocrystal silicon—In-line four-point probe and direct current two-point probe method 硅单晶电阻率的测定 直排四探针法和直流两探针法 |
China National Standards I |
English PDF |
GB/T 1029-2021 |
Test procedures for three-phase synchronous machInes 三相同步电机试验方法 |
China National Standards I |
English PDF |
GB/T 786.3-2021 |
FluId power systems and components—Graphical symbols and circuit diagrams—Part 3: Symbol modules and connected symbols in circuit diagrams 流体传动系统及元件 图形符号和回路图 第3部分:回路图中的符号模块和连接符号 |
China National Standards I |
English PDF |
GB/T 786.1-2021 |
FluId power systems and components—Graphical symbols and circuit diagrams—Part 1:Graphical symbols 流体传动系统及元件 图形符号和回路图 第1部分:图形符号 |
China National Standards I |
English PDF |
GB/T 325.6-2021 |
PackagIng container—Steel drum—Part 6:Tapered-opening steel drum 包装容器 钢桶 第6部分:锥形开口钢桶 |
China National Standards I |
English PDF |
GB/T 22394.2-2021 |
CondItion monitoring and diagnostics of machines - Data interpretation and diagnostics techniques - Part 2: Data-driven applications 机器状态监测与诊断 数据判读与诊断技术 第2部分:数据驱动的应用 |
China National Standards I |
English PDF |
GB/T 22148.3-2021 |
Test method on electromagnetIc emissions—Part 3:Electronic control gear for LED modules 电磁发射的试验方法 第3部分:LED模块用电子控制装置 |
China National Standards I |
English PDF |
GB/T 22114-2021 |
Humectants for toothpastes - GlycerIn and polyethylene glycol 牙膏用保湿剂 甘油和聚乙二醇 |
China National Standards I |
English PDF |
GB/T 21227-2021 |
AC loss measurements—Magnetometer methods for hysteresIs loss in superconducting multifilamentary composites 交流损耗测量 多丝复合超导材料磁滞损耗的磁强计测量法 |
China National Standards I |
English PDF |
GB/T 21017-2021 |
TechnIcal specifications for maize drying 玉米干燥技术规范 |
China National Standards I |
English PDF |
GB/T 20720.4-2021 |
EnterprIse-control system integration—Part 4:Object model attributes for manufacturing operations management integration 企业控制系统集成 第4部分:制造运行管理集成的对象模型属性 |
China National Standards I |
English PDF |
GB/T 20373-2021 |
DetermInation of acetyl content in modified starch—Titrimetric method 变性淀粉中乙酰基含量的测定 滴定法 |
China National Standards I |
English PDF |
GB/T 20228-2021 |
GallIum arsenide single crystal 砷化镓单晶 |
China National Standards I |
English PDF |
GB/T 20091-2021 |
ClassIfication for organizations 组织机构类型 |
China National Standards I |
English PDF |
GB/T 19216.3-2021 |
CIrcuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure 在火焰条件下电缆或光缆的线路完整性试验 第3部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法 |
China National Standards I |
English PDF |
GB/T 19216.2-2021 |
CIrcuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not 在火焰条件下电缆或光缆的线路完整性试验 第2部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法 |
China National Standards I |
English PDF |
GB/T 19216.1-2021 |
CIrcuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed 在火焰条件下电缆或光缆的线路完整性试验 第1部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法 |
China National Standards I |
English PDF |
GB/T 18916.56-2021 |
Norm of water Intake - Part 56: Fur 取水定额 第56部分:毛皮 |
China National Standards I |
English PDF |
GB/T 18916.54-2021 |
Norm of water Intake - Part 54: Canned food 取水定额 第54部分:罐头食品 |
China National Standards I |
English PDF |
GB/T 18916.53-2021 |
Norm of water Intake - Part 53: Sugar 取水定额 第53部分:食糖 |
China National Standards I |
English PDF |
GB/T 18916.1-2021 |
Norm of water Intake—Part 1:Thermal power production 取水定额 第1部分:火力发电 |
China National Standards I |
English PDF |
GB/T 18341-2021 |
SpecIfications of survey for geological and mineral resources exploration 地质矿产勘查测量规范 |
China National Standards I |
English PDF |
GB/T 18216.5-2021 |
ElectrIcal safety in low voltage distribution systems up to 1 000 V a.c, and 1500 V d.c.-Equipment for testing,measuring or monitoring of protective measures-Part 5:Resistance to earth 交流1000V和直流1500V及以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第5部分:对地电阻 |
China National Standards I |
English PDF |
GB/T 18216.4-2021 |
ElectrIcal safety in low voltage distribution systems up to 1 000 V a. c and 1 500 V d. c - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding 交流1000V和直流1500V及以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第4部分:接地电阻和等电位接地电阻 |
China National Standards I |
English PDF |
GB/T 18216.3-2021 |
ElectrIcal safety in low voltage distribution systems up to 1 000 V a. c. and 1 500 V d. c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance 交流1000V和直流1500V及以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第3部分:环路阻抗 |
China National Standards I |
English PDF |
GB/T 18216.2-2021 |
ElectrIcal safety in low voltage distribution systems up to 1 000 V a. c. and 1 500 V d. c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance 交流1000V和直流1500V及以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第2部分:绝缘电阻 |
China National Standards I |
English PDF |
GB/T 18216.1-2021 |
ElectrIcal safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.—Equipment for testing,measuring or monitoring of protective measures—Part 1:General requirements 交流1000V和直流1500V及以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第1部分:通用要求 |
China National Standards I |
English PDF |
GB/T 40240-2021 |
GuIdelines for evaluation of ecological community 生态社区评价指南 |
China National Standards I |
English PDF |
GB/T 40169-2021 |
CompressIon-moulded plates of ultra-high-molecular-weight polyethylene(PE-UHMW)and high density polyethylene (PE-HD) 超高分子量聚乙烯(PE-UHMW)和高密度聚乙烯(PE-HD)模塑板材 |
China National Standards I |
English PDF |
GB/T 40151-2021 |
SecurIty and resilience—Emergency management—Guidelines for capability assessment 安全与韧性 应急管理 能力评估指南 |
China National Standards I |
English PDF |
GB/T 8897.3-2021 |
PrImary batteries—Part 3:Watch batteries 原电池 第3部分:手表电池 |
China National Standards I |
English PDF |
GB/T 8897.2-2021 |
PrImary batteries—Part 2: Physical and electrical specifications 原电池 第2部分:外形尺寸和电性能 |
China National Standards I |
English PDF |
GB/T 8897.1-2021 |
PrImary batteries—Part 1:General 原电池 第1部分:总则 |
China National Standards I |
English PDF |
GB/T 25195.4-2021 |
Cranes—GraphIcal symbols—Part 4:Jib cranes 起重机 图形符号 第4部分:臂架起重机 |
China National Standards I |
English PDF |
GB 9656-2021 |
Safety technIcal specification for glazing materials used in power-driven vehicles 机动车玻璃安全技术规范 |
China National Standards I |
English PDF |
GB 19268-2021 |
SolId cyanide package 固体氰化物包装 |
China National Standards I |
English PDF |
GB 40160-2021 |
Safety rules for elevatIng work platforms 升降工作平台安全规则 |
China National Standards I |
English PDF |
GB 40161-2021 |
FIlters—Safety requirements 过滤机 安全要求 |
China National Standards I |
English PDF |
GB 40165-2021 |
LIthium ion cells and batteries used in stationary electronic equipments—Safety technical specification 固定式电子设备用锂离子电池和电池组 安全技术规范 |
China National Standards I |
English PDF |
GB 23238-2021 |
Boar lIquid semen 种猪常温精液 |
China National Standards I |
English PDF |
GB 17957-2021 |
Rock drIlling machines and pneumatic tools—Safety requirements 凿岩机械与气动工具 安全要求 |
China National Standards I |
English PDF |
GB 18382-2021 |
FertIlizer marking—Presentation and declaration 肥料标识 内容和要求 |
China National Standards I |
English PDF |
Find out:54769Items | To Page of: First -Previous-Next -Last | [56] [57] [58] [59] [60] [61] [62] |