GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 19613-2004 |
Concentration limitations of pollutants in surface water for the destruction of abandoned chemical weapons by Japan in China 销毁日本遗弃在华化学武器 地表水中污染物浓度标准(试行) |
China National Standards J |
English PDF |
GB 19612-2004 |
Concentrationlimitation of air pollutants for the destruction of abandoned chemical weapons by Japan in China 销毁日本遗弃在华化学武器 环境空气中污染物浓度标准(试行) |
China National Standards J |
English PDF |
GB/T 19555-2004 |
Textile machinery and accessories--Lingoes for Jacquard weaving 纺织机械与附件 提花织造用铅锤 |
China National Standards J |
English PDF |
GB/T 19554.3-2004 |
Textile machinery and accessories--Main dimensions of open end loop flat steel healds and their corresponding heald-carrying rods--Part 3:Carrying rod for healds with C-and J-shaped end loops 纺织机械与附件 开口式综耳钢片综及相应穿综杆的主要尺寸 第3部分:C型和J型综耳钢片综用穿综杆 |
China National Standards J |
English PDF |
GB/T 19554.2-2004 |
Textile machinery and accessories--Main dimension of open end loop flat steelhealds and their corresponding heald-carrying rods--Part 2:J-shapes end loops 纺织机械与附件 开口式综耳钢片综及相应穿综杆的主要尺寸 第2部分:J型综耳 |
China National Standards J |
English PDF |
GB/T 7584.1-2004 |
Acoustics--Hearing protectors--Part 1:SubJective method for the measurement of sound attenuation 声学 护听器 第1部分:声衰减测量的主观方法 |
China National Standards J |
English PDF |
GB/T 19471.2-2004 |
Plastics piping systems--Elastomeric-sealing-ring-type socket Joints of unplasticized poly(vinyl chloride)(PVC-U)for use with PVC-U pipes--Test method for leaktightness under negative pressure 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 负压密封试验方法 |
China National Standards J |
English PDF |
GB/T 19471.1-2004 |
Plastics piping systems--Elastomeric-sealing-ring-type socket Joints for use with unplasticized poly(vinyl chloride)(PVC-U)pipes--Test method forleaktighness under internal pressure and angular deflection 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 偏角密封试验方法 |
China National Standards J |
English PDF |
GB/T 19418-2003 |
Arc-welded Joints in steel--Guidance on quality levels for imperfections 钢的弧焊接头 缺陷质量分级指南 |
China National Standards J |
English PDF |
GB/T 19416-2003 |
Determination of Juice content in Chinese hawthorn juice and its drinks 山楂汁及其饮料中果汁含量的测定 |
China National Standards J |
English PDF |
GB/T 19404-2003 |
Microwave ferrite components--Measuringmethods for maJor properties 微波铁氧体器件主要性能测量方法 |
China National Standards J |
English PDF |
GB/T 19400-2003 |
Industrial robots--ObJect handling grasp-type grippers--Vocabulary and presentation of characteristics 工业机器人 抓握型夹持器物体搬运 词汇和特性表示 |
China National Standards J |
English PDF |
GB/T 9128-2003 |
Dimensions of metallic ring-Joint gaskets for use with steel pipe flanges 钢制管法兰用金属环垫 尺寸 |
China National Standards J |
English PDF |
GB/T 6087-2003 |
Key type three-Jaw drill chucks 扳手三爪钻夹头 |
China National Standards J |
English PDF |
GB/T 19294-2003 |
Specification for technological proJect of aerialphotography 航空摄影技术设计规范 |
China National Standards J |
English PDF |
GB 19299-2003 |
Hygienic standard for Jellies 果冻卫生标准 |
China National Standards J |
English PDF |
GB 19297-2003 |
Hygienic standard for fruit and vegetable Juice 果、蔬汁饮料卫生标准 |
China National Standards J |
English PDF |
GB/T 19259-2003 |
General technical specifications of video proJectors 视频投影器通用技术条件 |
China National Standards J |
English PDF |
GB/T 4678.9-2003 |
Die-casting die components--Part 9: EJector guide pillar 压铸模零件 第9部分: 推板导柱 |
China National Standards J |
English PDF |
GB/T 4678.8-2003 |
Die-casting die components--Part 8: EJectorplate 压铸模零件 第8部分: 推板 |
China National Standards J |
English PDF |
GB/T 4678.17-2003 |
Die-casting die components--Part 17: EJector sleeve 压铸模零件 第17部分:推管 |
China National Standards J |
English PDF |
GB/T 4678.16-2003 |
Die-casting die components--Part 16: Flat eJector pin 压铸模零件 第16部分:扁推杆 |
China National Standards J |
English PDF |
GB/T 4678.13-2003 |
Die-casting die components--Part 13: EJector plate washer 压铸模零件 第13部分:推板垫圈 |
China National Standards J |
English PDF |
GB/T 4678.11-2003 |
Die-casting die components--Part 11: EJector pin 压铸模零件 第11部分:推杆 |
China National Standards J |
English PDF |
GB/T 4678.10-2003 |
Die-casting die components--Part 10: EJector guide bush 压铸模零件 第10部分:推板导套 |
China National Standards J |
English PDF |
GB/T 19230.3-2003 |
Test method for evaluating gasoline detergent in use--Part 3: Test method for evaluating gasoline detergent produced effect forelectronic port fuel inJector(PFI) fouling 评价汽油清净剂使用效果的试验方法 第3部分: 汽油清净剂对电子孔式燃油喷嘴(PFI)堵塞倾向影响的试验方法 |
China National Standards J |
English PDF |
GB/T 5094.2-2003 |
Industrial systems,installations and equipment and industrial products--Structuring principles and reference designations--Part 2: Classification of obJects and codes for classes 工业系统、装置与设备以及工业产品 结构原则与参照代号 第2部分: 项目的分类与分类码 |
China National Standards J |
English PDF |
GB 2418-2003 |
NeiJiang pig 内江猪 |
China National Standards J |
English PDF |
GB/T 19099-2003 |
ProJect management guidelines for terminology standardization 术语标准化项目管理指南 |
China National Standards J |
English PDF |
GB/T 12945-2003 |
Jute fiber 熟黄麻 |
China National Standards J |
English PDF |
GB 19062-2003 |
Regulation of controlsoil pollution for destruction chemical weapons abandoned in China by Japan 销毁日本遗弃在华化学武器土壤污染控制标准(试行) |
China National Standards J |
English PDF |
GB 19061-2003 |
Regulation of controlwater pollutant for the destruction of abandoned chemical weapons by Japan inChina 销毁日本遗弃在华化学武器水污染物控制标准(试行) |
China National Standards J |
English PDF |
GB 19060-2003 |
Emission regulationof air pollutants for destruction of chemical weapons abandoned in China by Japan 销毁日本遗弃在华化学武器大气污染物排放标准(试行) |
China National Standards J |
English PDF |
GB 19059-2003 |
Regulation for concentration of pollutants in the workplace air for destruction of chemicalweapons abandoned in China by Japan 销毁日本遗弃在华化学武器工作区空气中污染物浓度标准(试行) |
China National Standards J |
English PDF |
GB 19058-2003 |
Environmental protection technological regulation on the entire process for the destruction of abandoned chemical weapons by Japan in China 销毁日本遗弃在华化学武器全过程环境保护技术规定(试行) |
China National Standards J |
English PDF |
GB 19057-2003 |
Regulation for solid waste treatment and disposal for the destruction of abandoned chemical weapons by Japan in China 销毁日本遗弃在华化学武器固体废物处理处置标准(试行) |
China National Standards J |
English PDF |
GB/T 18996-2003 |
Determination of silver in silver Jewellery alloys--Volumertic(potentiometric) method using sodium chloride or potassium chloride 银合金首饰中含银量的测定 氯化钠或氯化钾容量法(电位滴定法) |
China National Standards J |
English PDF |
GB/T 18977-2003 |
Ergonomics of the thermal environment--Assessment of the influence of the thermal environment usingsubJective judgement scales 热环境人类工效学 使用主观判定量表评价热环境的影响 |
China National Standards J |
English PDF |
GB/T 17037.4-2003 |
Plastic--InJection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage 塑料 热塑性塑料材料注塑试样的制备 第4部分: 模塑收缩率的测定 |
China National Standards J |
English PDF |
GB/T 17037.3-2003 |
Plastics--InJection moulding of test specimens of thermoplastic materials--Part 3: Small plates 塑料 热塑性塑料材料注塑试样的制备 第3部分: 小方试片 |
China National Standards J |
English PDF |
GB/T 18917-2002 |
Blank detail specification for the colour proJection picture tubes 彩色投影显象管空白详细规范 |
China National Standards J |
English PDF |
GB/T 18896-2002 |
Methods of measurement of the colour proJectionpicture tubes 彩色投影显象管测试方法 |
China National Standards J |
English PDF |
GB/T 12668.1-2002 |
AdJustable speed electrical power drive systems--Part 1:General requirements--Rating specifications for low voltage adjustable speed d.c. power drive systems 调速电气传动系统 第1部分:一般要求 低压直流调速电气传动系统 额定值的规定 |
China National Standards J |
English PDF |
GB/T 7568.6-2002 |
Textiles--Tests for colour fastness--Specification for silk adJacent fabric 纺织品 色牢度试验 丝标准贴衬织物规格 |
China National Standards J |
English PDF |
GB/T 7568.5-2002 |
Textiles--Tests for colour fastness--Specification for acrylic adJacent fabric 纺织品 色牢度试验 聚丙烯腈标准贴衬织物规格 |
China National Standards J |
English PDF |
GB/T 7568.4-2002 |
Textiles--Tests for colour fastness--Specification for polyester adJacent fabric 纺织品 色牢度试验 聚酯标准贴衬织物规格 |
China National Standards J |
English PDF |
GB/T 7568.1-2002 |
Textiles--Tests for colour fastness--Specification for wool adJacent fabric 纺织品 色牢度试验 毛标准贴衬织物规格 |
China National Standards J |
English PDF |
GB/T 10715-2002 |
Belt drives--V-ribbed belts,Joined V-belts and V-belts including wide section belts and hexagonal belts--Electrical conductivity of antistatic belts:Characteristics and methods of test 带传动 多楔带、联组V带及包括宽V带、六角带在内的单根V带 抗静电带的导电性:要求和试验方法 |
China National Standards J |
English PDF |
GB/T 6461-2002 |
Methodsfor corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subJected to corrosion tests 金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级 |
China National Standards J |
English PDF |
GB/Z 18812-2002 |
MIME encapsulation of EDI obJects EDI 对象的MIME封装 |
China National Standards J |
English PDF |
GB/T 12668.2-2002 |
AdJustable speed electrical power drive systems--Part 2:General requirements--Rating specifications for low voltage adjustable frequency a.c. power drive systems 调速电气传动系统 第2部分:一般要求 低压交流变频电气传动系统额定值的规定 |
China National Standards J |
English PDF |
GB/T 7967-2002 |
Acoustics--High-power characteristics of underwater sound proJectors and their measurements 声学 水声发射器的大功率特性和测量 |
China National Standards J |
English PDF |
GB/T 18700.2-2002 |
Telecontrol equipment and systems--Part 6:Telecontrol protocols compatible with ISO standards and ITU-T recommendations--Section 802:ObJect model of TASE.2 远动设备和系统 第6部分:与ISO标准和ITU-T建议兼容的远动协议 第802篇:TASE.2对象模型 |
China National Standards J |
English PDF |
GB 18667-2002 |
Assessment for body impairment of the inJured in road traffic accident 道路交通事故受伤人员伤残评定 |
China National Standards J |
English PDF |
GB/T 18641-2002 |
Diagnostic techniques for AuJeszk’s disease 伪狂犬病诊断技术 |
China National Standards J |
English PDF |
GB/T 18640-2002 |
Diagnostic techniques for domestic animals schistosomoiasis Japonica 家畜日本血吸虫病诊断技术 |
China National Standards J |
English PDF |
GB/T 18525.3-2001 |
Code of good irradiation practice for insect disinfestation of dried red Jujubes 红枣辐照杀虫工艺 |
China National Standards J |
English PDF |
GB/T 8803-2001 |
InJection-moulded unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings--Hot oven test method 注射成型硬质聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)、丙烯腈-丁二烯-苯乙烯三元共聚物(ABS)和丙烯腈-苯乙烯-丙烯酸盐三元共聚物(ASA)管件 热烘箱试验方法 |
China National Standards J |
English PDF |
GB/T 14926.49-2001 |
Laboratory animal--Method for examination of Campylobacter Jejuni 实验动物 空肠弯曲杆菌检测方法 |
China National Standards J |
English PDF |
GB/T 7307-2001 |
Pipe threads with 55 degree thread angle where pressure-tight Joints are not made on the threads 55°非密封管螺纹 |
China National Standards J |
English PDF |
GB/T 18247.7-2000 |
Product grade for maJor ornamental plants--Part 7:Turf 主要花卉产品等级 第7部分:草坪 |
China National Standards J |
English PDF |
GB/T 18247.6-2000 |
Product grade for maJor ornamental plants--Part 6:Flower bulbs 主要花卉产品等级 第6部分:花卉种球 |
China National Standards J |
English PDF |
GB/T 18247.5-2000 |
Product grade for maJor ornamental plants--Part 5:Young plants 主要花卉产品等级 第5部分:花卉种苗 |
China National Standards J |
English PDF |
GB/T 18247.4-2000 |
Product grade for maJor ornamental plants--Part 4:Flower seeds 主要花卉产品等级 第4部分:花卉种子 |
China National Standards J |
English PDF |
GB/T 18247.3-2000 |
Product grade for maJor ornamental plants--Part 3:Foliage potted plants 主要花卉产品等级 第3部分:盆栽观叶植物 |
China National Standards J |
English PDF |
GB/T 18247.2-2000 |
Product grade for maJor ornamental plants--Part 2:Flowering potted plants 主要花卉产品等级 第2部分:盆花 |
China National Standards J |
English PDF |
GB/T 18247.1-2000 |
Product grade for maJor ornamental plants--Part 1:Cut flowers 主要花卉产品等级 第1部分:鲜切花 |
China National Standards J |
English PDF |
GB/T 4636-2000 |
Maximum proJectable image area on35mm motion-picture film--Position and dimensions 35mm影片上最大可放映画面的位置和尺寸 |
China National Standards J |
English PDF |
GB/T 7306.2-2000 |
Pipe threads with 55 degree thread angle where pressure-tight Joints are made on the threads--Part 2:Taper internal and external threads 55°密封管螺纹 第2部分:圆锥内螺纹与圆锥外螺纹 |
China National Standards J |
English PDF |
GB/T 7306.1-2000 |
Pipe threads with 55 degree thread angle where pressure-tight Joints are made on the threads--Part 1:Parallel internal and taper external threads 55°密封管螺纹 第1部分:圆柱内螺纹与圆锥外螺纹 |
China National Standards J |
English PDF |
GB/T 18104-2000 |
KonJak refined powder 魔芋精粉 |
China National Standards J |
English PDF |
GB 18097-2000 |
Test method and aJudgment of safety of permissible explosive in inflammable gas 煤矿许用炸药可燃气安全度试验方法及判定 |
China National Standards J |
English PDF |
GB/T 17974-2000 |
General specification for desktop Ink-Jet printer 台式喷墨打印机通用规范 |
China National Standards J |
English PDF |
GB/T 17969.5-2000 |
Information technology--Open Systems Interconnection--Procedures for theoperation of OSI registration authorities--Part 5:Register of VT control obJect definitions 信息技术 开放系统互连 OSI登记机构的操作规程 第5部分:VT控制客体定义的登记表 |
China National Standards J |
English PDF |
GB 6000-1999 |
Tree seedling quality grading of maJor species for afforestation 主要造林树种苗木质量分级 |
China National Standards J |
English PDF |
GB/T 17773-1999 |
Tolerancing of orientation and location--ProJected tolerance zone 形状和位置公差 延伸公差带及其表示法 |
China National Standards J |
English PDF |
GB/T 17659.2-1999 |
Sampling and Judging methods for lot inspection of logs and sawn timbers--Part 2:Sampling and judging methods for lot inspection of sawn timbers 原木锯材批量检查抽样、判定方法 第2部分:锯材批量检查抽样、判定方法 |
China National Standards J |
English PDF |
GB/T 17659.1-1999 |
Sampling and Judging methods for lot inspection of logs and sawn timbers--Part 1:Sampling and judging methods for lot inspection of logs 原木锯材批量检查抽样、判定方法 第1部分:原木批量检查抽样、判定方法 |
China National Standards J |
English PDF |
GB/T 17604-1998 |
Rubber--Recommendations for the workmanship of pipe Joint rings--Description and classification of imperfections 橡胶 管道接口用密封圈制造质量的建议 疵点分类与类别 |
China National Standards J |
English PDF |
GB/T 17186-1997 |
Calculating method for the strength of steel pipe flanged Joint 钢制管法兰连接强度计算方法 |
China National Standards J |
English PDF |
GB/T 17180-1997 |
Information processing systems--Telecommunications and information exchange between systems--End system to intermediatesystem routeing exchange protocol for use in conJunction with the protocol for providing the connectionless-mode network service 信息处理系统 系统间远程通信和信息交换与提供无连接方式的网络服务协议联合使用的端系统到中间系统路由选择交换协议 |
China National Standards J |
English PDF |
GB/T 17175.4-1997 |
Information technology--Open systems interconnection--Structure of management information--Part 4:Guidelines for the definition of managed obJects 信息技术 开放系统互连 管理信息结构 第4部分:被管客体的定义指南 |
China National Standards J |
English PDF |
GB/T 17143.1-1997 |
Information technology--Open systems interconnection--Systems management--Part 1:ObJect management function 信息技术 开放系统互连 系统管理 第1部分:客体管理功能 |
China National Standards J |
English PDF |
GB/T 17037.1-1997 |
InJection moulding of test specimens of thermoplastic materials--Part 1:General principles and moulding of multipurpose and bar test specimens 热塑性塑料材料注塑试样的制备 第1部分:一般原理及多用途试样和长条试样的制备 |
China National Standards J |
English PDF |
GB/T 16948-1997 |
Technical product documentation--Vocabulary--Terms relating to proJection methods 技术产品文件 词汇 投影法术语 |
China National Standards J |
English PDF |
GB/T 16939-1997 |
High strength bolts for Joints of space grid structures 钢网架螺栓球节点用高强度螺栓 |
China National Standards J |
English PDF |
GB 16749-1997 |
Bellows expansion Joints for pressure vessel 压力容器波形膨胀节 |
China National Standards J |
English PDF |
GB/T 16610-1996 |
Audio-visual,video and television equipment and systems--Control systems for two still proJectors operating practice 视听、视频和电视设备与系统双幻灯机控制系统操作规程 |
China National Standards J |
English PDF |
GB/T 6329-1996 |
Adhesives--Determination of tensile strength of butt Joints 胶粘剂对接接头拉伸强度的测定 |
China National Standards J |
English PDF |
GB/T 16570-1996 |
Motor vehicles--Cradle-mounted in-line fuel inJection pumps for diesel engines--Mounting dimensions 汽车柴油机架装直列式喷油泵 安装尺寸 |
China National Standards J |
English PDF |
GB/T 16463-1996 |
The method of subJective assessment of the sound quality for broadcast programmes and the technical parameters requirements 广播节目声音质量主观评价方法和技术指标要求 |
China National Standards J |
English PDF |
GB 16392-1996 |
Diagnostic criteria and principles of management for combined radiation-burn inJury 放烧复合伤诊断标准及处理原则 |
China National Standards J |
English PDF |
GB 16391-1996 |
Diagnostic criteria and principles of management for combined radiation-blast inJury 放冲复合伤诊断标准及处理原则 |
China National Standards J |
English PDF |
GB 16389-1996 |
Diagnostic criteria and principles of management for external radiation bone inJuries 外照射放射性骨损伤诊断标准及处理原则 |
China National Standards J |
English PDF |
GB 16244-1996 |
Health standard for flax,Jute and ramie dusts in the air of workplace 车间空气中麻尘(亚麻、黄麻和苎麻)卫生标准 |
China National Standards J |
English PDF |
GB/T 16124-1995 |
Technical specifications for medical assessment of environmental impact on water conservancy and hydroelectric proJects 水利水电工程环境影响医学评价技术规范 |
China National Standards J |
English PDF |
GB/T 16098-1995 |
Workplace air--Determination of acrylonitrile--Direct inJection gas chromatographic method 车间空气中丙烯腈的直接进样气相色谱测定方法 |
China National Standards J |
English PDF |
GB/T 16095-1995 |
Workplace air--Determination of acetonitrile--Direct inJection gas chromatographic method 车间空气中乙腈的直接进样气相色谱测定方法 |
China National Standards J |
English PDF |
GB/T 16094-1995 |
Workplace air--Determination of tetrafluoroethylene--Direct inJection gas chromatographic method 车间空气中四氟乙烯的直接进样气相色谱测定方法 |
China National Standards J |
English PDF |
GB/T 16091-1995 |
Workplace air--Determination of chloroprene--Direct inJection gas chromatographic method 车间空气中氯丁二烯的直接进样气相色谱测定方法 |
China National Standards J |
English PDF |
Find out:1276Items | To Page of: First -Previous-Next -Last | [6] [7] [8] [9] [10] [11] [12] |