GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 70.5-2008 |
Gauging of hexagon socKets 内六角量规 |
China National Standards K |
English PDF |
GB/T 70.3-2008 |
Hexagon socKet countersunk head screws 内六角沉头螺钉 |
China National Standards K |
English PDF |
GB/T 70.2-2008 |
Hexagon socKet button head screws 内六角平圆头螺钉 |
China National Standards K |
English PDF |
GB/T 70.1-2008 |
Hexagon socKet head cap screws 内六角圆柱头螺钉 |
China National Standards K |
English PDF |
GB/T 261-2008 |
Determination of flash point - PensKy-Martens closed cup method 闪点的测定 宾斯基-马丁闭口杯法 |
China National Standards K |
English PDF |
GB/T 5511-2008 |
Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method 谷物和豆类 氮含量测定和粗蛋白质含量计算 凯氏法 |
China National Standards K |
English PDF |
GB/T 4925-2008 |
Fishing nets - Method of test for the determination of strength and breaKing elongation of netting of synthetic fiber 渔网 合成纤维网片强力与断裂伸长率试验方法 |
China National Standards K |
English PDF |
GB/T 22332-2008 |
Diagnostic techniques for ducK virus enteritis 鸭病毒性肠炎诊断技术 |
China National Standards K |
English PDF |
GB/T 22330.6-2008 |
Standard for specified animal disease free zone - Part 6: African horse sicKness free zone 无规定动物疫病区标准 第6部分:无非洲马瘟区 |
China National Standards K |
English PDF |
GB/T 14613-2008 |
Inspection of grain and oilseeds - Wheat-meal fermentation time test(PelshenKe test) 粮油检验 全麦粉发酵时间试验(Pelshenke试验) |
China National Standards K |
English PDF |
GB/T 3518-2008 |
FlaKe graphite 鳞片石墨 |
China National Standards K |
English PDF |
GB/T 22310-2008 |
Road vehicles - BraKe linings - Effects of heat on dimensions and form of disc brake pads-test procedure 道路车辆 制动衬片 盘式制动衬块受热膨胀量试验方法 |
China National Standards K |
English PDF |
GB/T 22309-2008 |
Road vehicles - BraKe linings - Shear test procedure for disc beake pad and drum brake shoe assemblies 道路车辆 制动衬片 盘式制动块总成和鼓式制动蹄总成剪切强度试验方法 |
China National Standards K |
English PDF |
GB/T 22308-2008 |
Standard test method for density of a sheet gasKet material 密封垫板材料密度试验方法 |
China National Standards K |
English PDF |
GB/T 22307-2008 |
Standard test method for compressive strength of gasKets at elevated temperatures 密封垫片高温抗压强度试验方法 |
China National Standards K |
English PDF |
GB/T 2007.4-2008 |
General rules for the sampling and sample preparation of minerals in bulK - Experimental methods for checking the precision and bias 散装矿产品取样、制样通则 偏差、精密度校核试验方法 |
China National Standards K |
English PDF |
GB/T 22311-2008 |
Road vehicles - BraKe linings - Compressive strain test method 道路车辆 制动衬片 压缩应变试验方法 |
China National Standards K |
English PDF |
GB/T 15064-2008 |
Test methods of colloidal graphite for Kinescope 显像管石墨乳试验方法 |
China National Standards K |
English PDF |
GB/T 10108-2008 |
Mulberry silK fabrics for export 出口桑蚕丝织物 |
China National Standards K |
English PDF |
GB/T 6344-2008 |
Flexible cellular polymeric materials - Determination of tensile strength and elongation at breaK 软质泡沫聚合材料 拉伸强度和断裂伸长率的测定 |
China National Standards K |
English PDF |
GB/T 22363-2008 |
Paper and board - Determination of roughness (air leaK methods) - Bendtsen method and print-surf method 纸和纸板粗糙度的测定(空气泄漏法) 本特生法和印刷表面法 |
China National Standards K |
English PDF |
GB/T 22362-2008 |
Laboratory glassware - FlasKs 实验室玻璃仪器 烧瓶 |
China National Standards K |
English PDF |
GB/T 22067-2008 |
Laboratory glassware - Wide necKed boiling flasks 实验室玻璃仪器 广口烧瓶 |
China National Standards K |
English PDF |
GB/T 15962-2008 |
Glossary of printing inK terms 油墨术语 |
China National Standards K |
English PDF |
GB/T 15724-2008 |
Laboratory glassware - BeaKers 实验室玻璃仪器 烧杯 |
China National Standards K |
English PDF |
GB/T 1545-2008 |
Paper, board and pulp - Determination of acidity or alKalinity 纸、纸板和纸浆 水抽提液酸度或碱度的测定 |
China National Standards K |
English PDF |
GB/T 12659-2008 |
Pulps - Laboratory beating JoKro mill method 纸浆实验室打浆 约克罗(Jokro)磨法 |
China National Standards K |
English PDF |
GB/T 9977-2008 |
The terms of coKing products 焦化产品术语 |
China National Standards K |
English PDF |
GB/T 9345.2-2008 |
Plastics - Determination of ash - Part 2: Poly(alKylend terephthalate)materials 塑料 灰分的测定 第2部分:聚对苯二甲酸烷撑酯 |
China National Standards K |
English PDF |
GB/T 8727-2008 |
Method for determination of coKing value of coal pitch products 煤沥青类产品结焦值的测定方法 |
China National Standards K |
English PDF |
GB/T 4511.1-2008 |
CoKe - Determination of true relative density apparent relative density and porosity 焦炭真相对密度、假相对密度和气孔率的测定方法 |
China National Standards K |
English PDF |
GB/T 4000-2008 |
CoKe - Determination of reactivity and strength after reaction 焦炭反应性及反应后强度试验方法 |
China National Standards K |
English PDF |
GB/T 2295-2008 |
Determination of the ash content of coKing solid products 焦化固体类产品灰分测定方法 |
China National Standards K |
English PDF |
GB/T 2286-2008 |
CoKe - Determination of total sulfur 焦炭全硫含量的测定方法 |
China National Standards K |
English PDF |
GB/T 2104-2008 |
Steel wire ropes - PacKing,marking and certificate - General requirements 钢丝绳包装、标志及质量证明书的一般规定 |
China National Standards K |
English PDF |
GB/T 2103-2008 |
General requirements for acceptance,pacKing,marking and quality certification of steel wire 钢丝验收、包装、标志及质量证明书的一般规定 |
China National Standards K |
English PDF |
GB/T 2006-2008 |
CoKe for metallurgy - Determination of mechanical strength 焦炭机械强度的测定方法 |
China National Standards K |
English PDF |
GB/T 1301-2008 |
Hollow drill steels for rocK drilling 凿岩钎杆用中空钢 |
China National Standards K |
English PDF |
GB/T 10560-2008 |
High tensile steels of round linK chains for mines 矿用高强度圆环链用钢 |
China National Standards K |
English PDF |
GB/Z 16506-2008 |
Information technology - Telecommunications and information exchange between systems - Protocol combinations to provide and support the OSI networK service 信息技术 系统间远程通信和信息交换 提供和支持OSI网络服务的协议组合 |
China National Standards K |
English PDF |
GB/T 7421-2008 |
Information technology - Telecommunications and information exchange between systems - High-level data linK control (HDLC) procedures 信息技术 系统间远程通信和信息交换 高级数据链路控制(HDLC)规程 |
China National Standards K |
English PDF |
GB/T 17179.1-2008 |
Information technology - Protocol for providing - The connectionless-mode networK service - Part 1:Protocol specification 信息技术 提供无连接方式网络服务的协议 第1部分:协议规范 |
China National Standards K |
English PDF |
GB/T 12405-2008 |
Coding for Kind of increase or decrease number of workers in an organization 单位增员减员代码 |
China National Standards K |
English PDF |
GB/T 13738.2-2008 |
BlacK tea - Part2: Congou black tea 红茶 第2部分:工夫红茶 |
China National Standards K |
English PDF |
GB/T 9959.2-2008 |
Fresh and frozen porK lean,cuts 分割鲜、冻猪瘦肉 |
China National Standards K |
English PDF |
GB 22284-2008 |
Large yorKshire breeding pigs 大约克夏猪种猪 |
China National Standards K |
English PDF |
GB/T 22289-2008 |
Requrirement for processing chilled porK 冷却猪肉加工技术要求 |
China National Standards K |
English PDF |
GB/T 5900.1-2008 |
Machine tools - Connecting dimensions of spindle noses and worKholding chucks - Part 1: Conical connection 机床 主轴端部与卡盘连接尺寸 第1部分:圆锥连接 |
China National Standards K |
English PDF |
GB/T 15377-2008 |
Terminology for WoodworKing machines - Planing machines 木工机床术语 刨床 |
China National Standards K |
English PDF |
GB/T 15376-2008 |
WooKworking machines - Turning lathes - Nomenclature and acceptance conditions 木工机床 普通车床 术语和精度 |
China National Standards K |
English PDF |
GB/T 14303-2008 |
WooKworking machines - Single blade circular saw benches with or without travelling table - Nomenclature and acceptance conditions 木工机床 单锯片圆锯机 术语和精度 |
China National Standards K |
English PDF |
GB/T 13572-2008 |
WooKworking machines - Planing machines for two-,three,or four-side dressing - Nomenclature and accetpance conditions 木工机床 二、三、四面刨床 术语和精度 |
China National Standards K |
English PDF |
GB/T 1149.9-2008 |
Internal combustion engines - Piston rings - Part 9: Keystone rings made of cast iron 内燃机 活塞环 第9部分:梯形铸铁环 |
China National Standards K |
English PDF |
GB/T 478-2008 |
Method for float and sinK analysis of coal 煤炭浮沉试验方法 |
China National Standards K |
English PDF |
GB/T 15268-2008 |
Mulberry silKworm fresh cocoons 桑蚕鲜茧 |
China National Standards K |
English PDF |
GB 6345.3-2008 |
Information technology - Chinese ideogram coded character set (basic set) - 32 dot matrix font - Part 3:Kai Ti 信息技术 汉字编码字符集(基本集) 32点阵字型 第3部分:楷体 |
China National Standards K |
English PDF |
GB 22323-2008 |
Information technology - Tibetan coded character set (basic set & extension set A) - 24×48 dot matrix font - Ucen Khyungyik 信息技术 藏文编码字符集(基本集及扩充集A) 24×48点阵字型 吾坚琼体 |
China National Standards K |
English PDF |
GB 14245.3-2008 |
Information technology - Chinese ideogram coded character set (basic set) - 64 dot matrix font - Part 3:Kai Ti 信息技术 汉字编码字符集(基本集) 64点阵字型 第3部分:楷体 |
China National Standards K |
English PDF |
GB 12041.3-2008 |
Information technology - Chinese ideogram coded character set (basic set) - 48 dot matrix font - Part 3:Kai Ti 信息技术 汉字编码字符集(基本集) 48点阵字型 第3部分:楷体 |
China National Standards K |
English PDF |
GB/T 1798-2008 |
Methoden of testing for raw silK 生丝试验方法 |
China National Standards K |
English PDF |
GB/T 1797-2008 |
Raw silK 生丝 |
China National Standards K |
English PDF |
GB/T 7497.3-2008 |
Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS Ⅰ) - Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socKet (indirect) connectors 微处理器系统总线 8位及16位数据(MULTIBUS I) 第3部分:对带有插针与插座连接器(间接配合)的欧洲板配置的机械与插针的描述 |
China National Standards K |
English PDF |
GB/T 3650-2008 |
The general rules for inspection pacKing,storing transportation, marking and certification of ferroalloy 铁合金验收、包装、储运、标志和质量证明书的一般规定 |
China National Standards K |
English PDF |
GB/T 8324-2008 |
Plastics - Determination of bulK factor of moulding materials 塑料 模塑材料体积系数的测定 |
China National Standards K |
English PDF |
GB/T 3398.2-2008 |
Plastics - Determination of hardness - Part 2:RocKwell hardness 塑料 硬度测定 第2部分:洛氏硬度 |
China National Standards K |
English PDF |
GB/T 15223-2008 |
Plastics - Liquid resins - Determination of density by the pyKnometer method 塑料 液体树脂 用比重瓶法测定密度 |
China National Standards K |
English PDF |
GB/T 15098-2008 |
The principle of classification of transport pacKaging groups of dangerous goods 危险货物运输包装类别划分方法 |
China National Standards K |
English PDF |
GB/T 14492-2008 |
Unreusable steel drum of calcium carbide for pacKing 一次性使用电石包装钢桶 |
China National Standards K |
English PDF |
GB/T 1033.1-2008 |
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyKnometer method and titration method 塑料 非泡沫塑料密度的测定 第1部分:浸渍法、液体比重瓶法和滴定法 |
China National Standards K |
English PDF |
GB/T 591-2008 |
Marine cast iron flanged stop checK valves 船用法兰铸铁截止止回阀 |
China National Standards K |
English PDF |
GB/T 585-2008 |
Marine cast steel flanged stop checK valves 船用法兰铸钢截止止回阀 |
China National Standards K |
English PDF |
GB/T 5741-2008 |
Measure method for exhaust smoKe of marine diesel engine 船用柴油机排气烟度测量方法 |
China National Standards K |
English PDF |
GB/T 1953-2008 |
Marine low pressure bronze male threaded stop checK valves 船用低压外螺纹青铜截止止回阀 |
China National Standards K |
English PDF |
GB/T 1850-2008 |
Marine male threaded weight quicK-closing valves 船用外螺纹重块式快关阀 |
China National Standards K |
English PDF |
GB/T 1842-2008 |
Plastics - Test method for environmental stress-cracKing of polyethylene 塑料 聚乙烯环境应力开裂试验方法 |
China National Standards K |
English PDF |
GB/T 22299-2008 |
Ground papriKa - Determination of total natural coloring matter content 辣椒粉 天然着色物质总含量的测定 |
China National Standards K |
English PDF |
GB 50393-2008 |
Technical code for anticorrosive engineering of the steel petroleum tanK 钢质石油储罐防腐蚀工程技术规范 |
China National Standards K |
English PDF |
GB 4706.76-2008 |
Household and similar electrical appliances-Safety - Particular requirements for insect Killers 家用和类似用途电器的安全 灭虫器的特殊要求 |
China National Standards K |
English PDF |
GB 13961-2008 |
Electrical supply tracK systems for luminaires 灯具用电源导轨系统 |
China National Standards K |
English PDF |
GB/T 4048-2008 |
TimeKeeping instruments - Wristwatches - Dimensions of bracelet-to-case fastening elements 计时仪器 手表壳与表带连接部位的尺寸系列 |
China National Standards K |
English PDF |
GB/T 14629.3-2008 |
Sheep Kivskin and sheep lamb skins 滩二毛皮、滩羔皮 |
China National Standards K |
English PDF |
GB/T 14629.2-2008 |
Persin lamb sKins 三北羔皮 |
China National Standards K |
English PDF |
GB/T 11759-2008 |
Raw cattle hides and sKins 牛皮 |
China National Standards K |
English PDF |
GB/T 19505-2008 |
Product of geographical indication - Lushuihe Korean pine seeds and kernel 地理标志产品 露水河红松籽仁 |
China National Standards K |
English PDF |
GB/T 18654.12-2008 |
Inspection of germplasm for cultured fishes - Part 12: Method for the Karyotpe analysis 养殖鱼类种质检验 第12部分: 染色体组型分析 |
China National Standards K |
English PDF |
GB 13042-2008 |
PacKaging containers - Tinplate aerosol can 包装容器 铁质气雾罐 |
China National Standards K |
English PDF |
GB/T 22209-2008 |
Marine no-asbestos fiber reinforced rubber gasKets 船用垫片用非石棉纤维增强橡胶板 |
China National Standards K |
English PDF |
GB/T 22208-2008 |
Test methods of no-asbestos fiber reinforced rubber gasKets 船用垫片用非石棉纤维增强橡胶板试验方法 |
China National Standards K |
English PDF |
GB/T 13576.4-2008 |
Buttress threads with the flanK angles of 3 and 30 degrees - Part 4: Tolerances 锯齿形(3°、30°)螺纹 第4部分:公差 |
China National Standards K |
English PDF |
GB/T 13576.3-2008 |
Buttress threads with the flanK angles of 3 and 30 degrees - Part 3: Basic dimensions 锯齿形(3°、30°)螺纹 第3部分:基本尺寸 |
China National Standards K |
English PDF |
GB/T 13576.2-2008 |
Buttress threads with the flanK angles of 3 and 30 degrees - Part 2: General plan 锯齿形(3°、30°)螺纹 第2部分:直径与螺距系列 |
China National Standards K |
English PDF |
GB/T 13576.1-2008 |
Buttress threads with the flanK angles of 3 and 30 degrees - Part 1: Profiles 锯齿形(3°、30°)螺纹 第1部分:牙型 |
China National Standards K |
English PDF |
GB/T 11344-2008 |
Non-destructive testing - Practice for measuring thicKness by ultrasonic pulse-echo contact method 无损检测 接触式超声脉冲回波法测厚方法 |
China National Standards K |
English PDF |
GB/T 11259-2008 |
Non-destructive testing - Practice for fabrication and control of steel reference blocKs used in ultrasonic testing 无损检测 超声检测用钢参考试块的制作与检验方法 |
China National Standards K |
English PDF |
GB/T 10671-2008 |
Test method for specific optical density of smoKe generated by solid materials 固体材料产烟的比光密度试验方法 |
China National Standards K |
English PDF |
GB/T 22205-2008 |
Hydrogeological classification of mining district or worKing face 煤矿采区或工作面水文地质条件分类 |
China National Standards K |
English PDF |
GB/T 16414-2008 |
Terms relating to coal mining - RocK mechanics 煤矿科技术语 岩石力学 |
China National Standards K |
English PDF |
GB/T 13979-2008 |
Mass spectrometer leaK detector 质谱检漏仪 |
China National Standards K |
English PDF |
GB/T 15629.2-2008 |
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networKs - Specific requirements - Part 2: Logical link control 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第2部分:逻辑链路控制 |
China National Standards K |
English PDF |
GB/T 15123-2008 |
Information technology - Telecommunication and information exchange between systems - DTE/DCE interface bacK-up control operation using GB/T 3454 interchange circuits 信息技术 系统间远程通信和信息交换 使用GB/T 3454的DTE/DCE接口备用控制操作 |
China National Standards K |
English PDF |
Find out:9199Items | To Page of: First -Previous-Next -Last | [58] [59] [60] [61] [62] [63] [64] |