GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 19209.2-2003 |
Examine general rule of rePAir quality for tractor--Part 2: Caterpillar tractor 拖拉机修理质量检验通则 第2部分: 履带拖拉机 |
China National Standards PA |
English PDF |
GB/T 19209.1-2003 |
Examine general rule of rePAir quality for tractor--Part 1: Wheeled tractor 拖拉机修理质量检验通则 第1部分:轮式拖拉机 |
China National Standards PA |
English PDF |
GB 18458.2-2003 |
Special infusion sets--PArt 2: Burette-type infusion sets for single use 专用输液器 第2部分: 一次性使用滴定管式输液器 |
China National Standards PA |
English PDF |
GB/T 19183.5-2003 |
Mechanical structures for electronic equipment--Outdoor enclosures--PArt 3: Climatic,mechanical tests and safety aspects for cabinets and cases 电子设备机械结构 户外机壳 第3部分: 机柜和箱体的气候、机械试验及安全要求 |
China National Standards PA |
English PDF |
GB/T 19183.4-2003 |
Mechanical structuresfor electronic equipment--Outdoor enclosures--PArt 2-2: Dimensions for cases 电子设备机械结构 户外机壳 第2-2部分: 箱体尺寸 |
China National Standards PA |
English PDF |
GB/T 19183.3-2003 |
Mechanical structuresfor electronic equipment--Outdoor enclosures--PArt 2-1:Dimensions for cabinets 电子设备机械结构 户外机壳 第2-1部分:机柜尺寸 |
China National Standards PA |
English PDF |
GB/T 19183.2-2003 |
Mechanical structures for electronic equipment--Outdoor enclosures--PArt 2: Coordination dimensions for cases and cabinets 电子设备机械结构 户外机壳 第2部分: 箱体和机柜的协调尺寸 |
China National Standards PA |
English PDF |
GB/T 19183.1-2003 |
Mechanical structures for electronic equipment--Outdoor enclosures--PArt 1: Design guidelines 电子设备机械结构 户外机壳 第1部分:设计导则 |
China National Standards PA |
English PDF |
GB 4706.65-2003 |
Safety of household and similar electrical appliances--PArticular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators 家用和类似用途电器的安全 步行控制的电动草坪松土机和松砂机的专用要求 |
China National Standards PA |
English PDF |
GB/T 5094.2-2003 |
Industrial systems,installations and equipment and industrial products--Structuring principles and reference designations--PArt 2: Classification of objects and codes for classes 工业系统、装置与设备以及工业产品 结构原则与参照代号 第2部分: 项目的分类与分类码 |
China National Standards PA |
English PDF |
GB/T 17645.24-2003 |
Industrial automation systems and integration--PArts library--Part 24: Logical resources: Logical model of supplier library 工业自动化系统与集成 零件库 第24部分: 逻辑资源: 供应商库的逻辑模型 |
China National Standards PA |
English PDF |
GB/T 1094.10-2003 |
Power transformers--PArt 10: Determination of sound levels 电力变压器 第10部分:声级测定 |
China National Standards PA |
English PDF |
GB/T 19180-2003 |
Diagnostic techniques for bovine spongiform encephaloPAthy 牛海绵状脑病诊断技术 |
China National Standards PA |
English PDF |
GB/T 19178-2003 |
Testing rules for PArent eggs of silkworm (Bombyx mori) 桑蚕原种检验规程 |
China National Standards PA |
English PDF |
GB 19179-2003 |
PArent eggs of silkworm(Bombyx mori) 桑蚕原种 |
China National Standards PA |
English PDF |
GB 16915.4-2003 |
Switches for household and similar fixed-electrical installations--PArt 2:Particular requirements--Section 3: Time-delay switches(TDS) 家用和类似用途固定式电气装置的开关 第2部分: 特殊要求 第3节: 延时开关 |
China National Standards PA |
English PDF |
GB 1094.3-2003 |
Power transformers--PArt 3: Insulation levels,dielectric tests and external clearances in air 电力变压器 第3部分: 绝缘水平、绝缘试验和外绝缘空气间隙 |
China National Standards PA |
English PDF |
GB/T 18755.2-2003 |
Industrial automation systems and integration--Manufacturing Automation Programming Environment (MAPLE)--PArt 2: Services and interfaces 工业自动化系统与集成 制造自动化编程环境(MAPLE) 第2部分: 服务与接口 |
China National Standards PA |
English PDF |
GB/T 16273.6-2003 |
Graphical symbols for use on equipment--PArt 6: Common symbols for conveying,vehicle testing and loading machine 设备用图形符号 第6部分: 运输、车辆检测及装载机械通用符号 |
China National Standards PA |
English PDF |
GB/T 7631.2-2003 |
Lubricants,industrial oils and related products(class L)--Classification--PArt 2: Family H(Hydraulic systems) 润滑剂、工业用油和相关产品(L类)的分类 第2部分:H组(液压系统) |
China National Standards PA |
English PDF |
GB/T 6072.5-2003 |
Reciprocating internal combustion engines--Performance--PArt 5: Torsional vibrations 往复式内燃机 性能 第5部分: 扭转振动 |
China National Standards PA |
English PDF |
GB/T 19115.2-2003 |
Off-grid type wind-solar photovoltaic hybrid generate electricity system of household-use--PArt 2: Test methods 离网型户用风光互补发电系统 第2部分: 试验方法 |
China National Standards PA |
English PDF |
GB/T 19115.1-2003 |
Off-grid type wind-solar photovoltaic hybrid generate electricity system of household-use--PArt 1: Technology condition 离网型户用风光互补发电系统 第1部分:技术条件 |
China National Standards PA |
English PDF |
GB/T 19068.1-2003 |
Off-grid wind turbine generatorsystem--PArt 1: Technical condition 离网型风力发电机组 第1部分:技术条件 |
China National Standards PA |
English PDF |
GB 19109-2003 |
Requirements of PAcking for calcium hypochlorite 次氯酸钙包装要求 |
China National Standards PA |
English PDF |
GB 19107-2003 |
Requirements of PAcking for sodium hypochloritesolution 次氯酸钠溶液包装要求 |
China National Standards PA |
English PDF |
GB 19105-2003 |
Requirements of PAcking for peroxyacetic acid 过氧乙酸包装要求 |
China National Standards PA |
English PDF |
GB/T 6159.8-2003 |
Micrographics--Vocabulary--PArt 8: Use 缩微摄影技术 词汇 第8部分:应用 |
China National Standards PA |
English PDF |
GB/T 6159.6-2003 |
Micrographics--Vocabulary--PArt 6: Equipment 缩微摄影技术 词汇 第6部分: 设备 |
China National Standards PA |
English PDF |
GB 15629.11-2003 |
Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--PArt 11: Wireless LAN Medium Access Control (MAC) andPhysical Layer(PHY) Specifications 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范 |
China National Standards PA |
English PDF |
GB 15629.1102-2003 |
Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--PArt 11: Wireless LAN Medium Access Control (MAC) and Physical Layer(PHY) Specifications: Higher-Speed Physi 信息技术 系统间远程通信和信息交换局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范:2.4 GHz频段较高速物理层扩展规范 |
China National Standards PA |
English PDF |
GB/T 19114.1-2003 |
Industrial automation systems and integration--Industrial manufacturing management data--PArt 1:General overview 工业自动化系统与集成 工业制造管理数据 第1部分:综述 |
China National Standards PA |
English PDF |
GB/T 16656.49-2003 |
Industrial automation systems and integration--Product data representation and exchange--PArt 49: Integrated generic resource: Process structure and properties 工业自动化系统与集成产品数据表达与交换 第49部分: 集成通用资源: 工艺过程结构和特性 |
China National Standards PA |
English PDF |
GB/T 19094-2003 |
Coal prePAration plant--Principles and conventions for flow sheets 选煤厂 流程图原则和规定 |
China National Standards PA |
English PDF |
GB/Z 19091.1-2003 |
Definitions and attributes of data elements for control and monitoring of textile processes--PArt 1: Spinning,spinning preparatory and related processes 纺织工艺监控用数据元素的定义和属性 第1部分:纺、纺前准备及相关工艺 |
China National Standards PA |
English PDF |
GB/T 5832.1-2003 |
Determination of moisture in gases--PArt 1: Electrolytic method 气体湿度的测定 第1部分:电解法 |
China National Standards PA |
English PDF |
GB 19053-2003 |
Safety limits of PAthogenic bacteria for funeral and interment place 殡仪场所致病菌安全限值 |
China National Standards PA |
English PDF |
GB/T 19067.1-2003 |
Geometrical Product Specifications(GPS)--Surface texture: Profile method--Measurement standards--PArt 1: Material measures 产品几何量技术规范(GPS) 表面结构 轮廓法 测量标准 第1部分:实物测量标准 |
China National Standards PA |
English PDF |
GB/T 18778.2-2003 |
Geometrical Product Specifications(GPS)--Surface texture: Profile method--Surface having stratified functional properties--PArt 2: Height characterization using the linear material ratio curve 产品几何量技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第2部分: 用线性化的支承率曲线表征高度特性 |
China National Standards PA |
English PDF |
GB/T 8243.4-2003 |
Methods of test for full-flow lubricating oil filters for internal combustion engines--PArt 4: Initial particle retention efficiency,life and cumulative efficiency(gravimetric method) 内燃机全流式机油滤清器试验方法 第4部分: 原始滤清效率、寿命和累积效率(重量法) |
China National Standards PA |
English PDF |
GB/T 8243.3-2003 |
Methods of test for full-flow lubricating oil filters for internal combustion engines--PArt 3: Resistance to high differential pressure and to elevated temperature 内燃机全流式机油滤清器试验方法 第3部分: 耐高压差和耐高温特性 |
China National Standards PA |
English PDF |
GB/T 8243.2-2003 |
Methods of test for full-flow lubricating oil filters for internal combustion engines--PArt 2: Element by-pass valve characteristics 内燃机全流式机油滤清器试验方法 第2部分: 滤芯旁通阀特性 |
China National Standards PA |
English PDF |
GB/T 8243.1-2003 |
Methods of test for full-flow lubricating oil filters for internal combustion engines--PArt 1: Differential pressure/flow characteristics 内燃机全流式机油滤清器试验方法 第1部分:压差-流量特性 |
China National Standards PA |
English PDF |
GB/T 8190.8-2003 |
Reciprocating internal combustion engines--Exhaust emission measurement--PArt 8: Engine group determination 往复式内燃机 排放测量 第8部分: 发动机系组的确定 |
China National Standards PA |
English PDF |
GB/T 8190.7-2003 |
Reciprocating internal combustion engines--Exhaust emission measurement--PArt 7: Engine family determination 往复式内燃机 排放测量 第7部分: 发动机系族的确定 |
China National Standards PA |
English PDF |
GB/T 8190.3-2003 |
Reciprocating internal combustion engines--Exhaust emission measurement--PArt 3:Definitions and methods of measurement of exhaust gas smoke under steady-state conditions 往复式内燃机 排放测量 第3部分: 稳态工况排气烟度的定义和测量方法 |
China National Standards PA |
English PDF |
GB/T 4437.2-2003 |
Aluminium and aluminium alloy extruded tubes--PArt 2: Seam tubes 铝及铝合金热挤压管 第2部分: 有缝管 |
China National Standards PA |
English PDF |
GB/T 19071.2-2003 |
Asynchronous generator forwind turbine generator systems--PArt 2: Test method 风力发电机组 异步发电机 第2部分: 试验方法 |
China National Standards PA |
English PDF |
GB/T 19071.1-2003 |
Asynchronous generator forwind turbine generator systems--PArt 1: Technical condition 风力发电机组 异步发电机 第1部分:技术条件 |
China National Standards PA |
English PDF |
GB/T 19068.3-2003 |
Off-grid wind turbine generator system--PArt 3: Wind tunnel test methods 离网型风力发电机组 第3部分: 风洞试验方法 |
China National Standards PA |
English PDF |
GB/T 19068.2-2003 |
Off-grid wind turbine generatorsystem--PArt 2: Test method 离网型风力发电机组 第2部分: 试验方法 |
China National Standards PA |
English PDF |
GB/T 10760.2-2003 |
Generator of off-grid wind turbines generator system--PArt 2: Testing method 离网型风力发电机组用发电机 第2部分: 试验方法 |
China National Standards PA |
English PDF |
GB/T 10760.1-2003 |
Generator of off-grid wind turbines generator system--PArt 1: Technical condition 离网型风力发电机组用发电机 第1部分:技术条件 |
China National Standards PA |
English PDF |
GB 19062-2003 |
Regulation of controlsoil pollution for destruction chemical weapons abandoned in China by JaPAn 销毁日本遗弃在华化学武器土壤污染控制标准(试行) |
China National Standards PA |
English PDF |
GB 19061-2003 |
Regulation of controlwater pollutant for the destruction of abandoned chemical weapons by JaPAn inChina 销毁日本遗弃在华化学武器水污染物控制标准(试行) |
China National Standards PA |
English PDF |
GB 19060-2003 |
Emission regulationof air pollutants for destruction of chemical weapons abandoned in China by JaPAn 销毁日本遗弃在华化学武器大气污染物排放标准(试行) |
China National Standards PA |
English PDF |
GB 19059-2003 |
Regulation for concentration of pollutants in the workplace air for destruction of chemicalweapons abandoned in China by JaPAn 销毁日本遗弃在华化学武器工作区空气中污染物浓度标准(试行) |
China National Standards PA |
English PDF |
GB 19058-2003 |
Environmental protection technological regulation on the entire process for the destruction of abandoned chemical weapons by JaPAn in China 销毁日本遗弃在华化学武器全过程环境保护技术规定(试行) |
China National Standards PA |
English PDF |
GB 19057-2003 |
Regulation for solid waste treatment and disposal for the destruction of abandoned chemical weapons by JaPAn in China 销毁日本遗弃在华化学武器固体废物处理处置标准(试行) |
China National Standards PA |
English PDF |
GB 9706.21-2003 |
Medical electrical equipment--PArt 2: Particular requirements for the safety of patient contact dosemeters used in radiotherapy with electrically connected radiation detectors 医用电气设备 第2部分:用于放射治疗与患者接触且具有电气连接辐射探测器的剂量计的安全专用要求 |
China National Standards PA |
English PDF |
GB/T 7305-2003 |
Standard test method for water sePArabilityof petroleum oils and synthetic fluids 石油和合成液水分离性测定法 |
China National Standards PA |
English PDF |
GB/T 17680.9-2003 |
Criteria for emergency planning and prePAredness for nuclear power plants--Maintenance of on-site emergency response capacity 核电厂应急计划与准备准则 场内应急响应能力的保持 |
China National Standards PA |
English PDF |
GB/T 17680.8-2003 |
Criteria for emergency planning and prePAredness for nuclear power plants--On-site emergency planning and implementing procedures 核电厂应急计划与准备准则 场内应急计划与执行程序 |
China National Standards PA |
English PDF |
GB/T 17680.7-2003 |
Criteria for emergency planning and prePAredness for nuclear power plants--Function and physical characteristics of on-site emergency facilities 核电厂应急计划与准备准则 场内应急设施功能与特性 |
China National Standards PA |
English PDF |
GB/T 17680.6-2003 |
Criteria for emergency planning and prePAredness for nuclear power plants--On-site emergency response functions and organizations 核电厂应急计划与准备准则 场内应急响应职能与组织机构 |
China National Standards PA |
English PDF |
GB/T 17680.10-2003 |
Criteria for emergency planning and prePAredness for nuclear power plants--Criteria for emergency radiological field monitoring,sampling and analysis conducted by nuclear power plant operating organizations 核电厂应急计划与准备准则 核电厂营运单位应急野外辐射监测、取样与分析准则 |
China National Standards PA |
English PDF |
GB/T 19045-2003 |
PrePAration of parts lists 明细表的编制 |
China National Standards PA |
English PDF |
GB 7691-2003 |
Safety code for PAinting--Safety management general rule 涂装作业安全规程 安全管理通则 |
China National Standards PA |
English PDF |
GB/T 17127.4-2003 |
Agriculturalwheeled tractors and implements--Three-point hitch couplers--PArt 4: Bar coupler 农业轮式拖拉机和机具 三点悬挂挂接器 第4部分: 杆式挂接器 |
China National Standards PA |
English PDF |
GB/T 13877.5-2003 |
Tractors and self-propelled machines for agriculture and forestry--Operator enclosure environment--PArt 5: Pressurization system test method 农林拖拉机和自走式机械封闭驾驶室 第5部分: 空气压力调节系统试验方法 |
China National Standards PA |
English PDF |
GB/T 13877.4-2003 |
Tractorsand self-propelled machines for agriculture and forestry--Operator enclosure environment--PArt 4: Air filter element test method 农林拖拉机和自走式机械封闭驾驶室 第4部分: 空气滤清器试验方法 |
China National Standards PA |
English PDF |
GB/T 13877.3-2003 |
Tractors and self-propelled machines for agriculture and forestry--Operator enclosure environment--PArt 3: Determination of effect of solar heating 农林拖拉机和自走式机械封闭驾驶室 第3部分: 太阳能加热系统效率的确定 |
China National Standards PA |
English PDF |
GB/T 13877.2-2003 |
Tractors and self-propelled machines for agriculture and forestry--Operator enclosure environment--PArt 2: Heating,ventilation and air-conditioning test method and performance 农林拖拉机和自走式机械封闭驾驶室 第2部分: 采暖、通风和空调系统试验方法和性能要求 |
China National Standards PA |
English PDF |
GB/T 13877.1-2003 |
Tractors and self-propelled machines for agriculture and forestry--Operator enclosure environment--PArt 1: Vocabulary 农林拖拉机和自走式机械封闭驾驶室 第1部分:词汇 |
China National Standards PA |
English PDF |
GB/T 10916-2003 |
Agricultural wheeled tractors--Front-mounted equipment--PArt 1: Power take-off and three-point linkage 农业轮式拖拉机 前置装置 第1部分:动力输出轴和三点悬挂装置 |
China National Standards PA |
English PDF |
GB/T 18998.3-2003 |
Chlorinated poly(vinyl chloride)(PVC-C) piping systems for industrial applications--PArt 3: Fittings 工业用氯化聚氯乙烯(PVC-C)管道系统 第3部分: 管件 |
China National Standards PA |
English PDF |
GB/T 18998.2-2003 |
Chlorinated poly(vinyl chloride)(PVC-C) piping systems for industrial applications--PArt 2: Pipes 工业用氯化聚氯乙烯(PVC-C)管道系统 第2部分: 管材 |
China National Standards PA |
English PDF |
GB/T 18998.1-2003 |
Chlorinated poly(vinyl chloride)(PVC-C) piping systems for industrial applications--PArt 1: General 工业用氯化聚氯乙烯(PVC-C)管道系统 第1部分:总则 |
China National Standards PA |
English PDF |
GB/T 18997.2-2003 |
Polyethylene/Aluminum/Polyethylene composite pressure pipe--PArt 2:PE/AL/PE pipe butt-welded by aluminum pipe 铝塑复合压力管 第2部分:铝管对接焊式铝塑管 |
China National Standards PA |
English PDF |
GB/T 18997.1-2003 |
Polyethylene/Aluminum/Polyethylene composite pressure pipe--PArt 1:PE/AL/PE pipe overlap-welded by aluminum pipe 铝塑复合压力管 第1部分:铝管搭接焊式铝塑管 |
China National Standards PA |
English PDF |
GB/T 18780.2-2003 |
Geometrical Product Specifications(GPS)--Geometrical features--PArt 2: Extracted median line of a cylinder and a cone,extracted median surface,local size of an extracted feature 产品几何量技术规范(GPS) 几何要素 第2部分: 圆柱面和圆锥面的提取中心线、平行平面的提取中心面、提取要素的局部尺寸 |
China National Standards PA |
English PDF |
GB/T 16857.4-2003 |
Geometrical Product Specifications(GPS)--Acceptance andreverification tests for coordinate measuring machines(CMM)--PArt 4: CMMs used in scanning measuring mode 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第4部分: 在扫描模式下使用的坐标测量机 |
China National Standards PA |
English PDF |
GB/T 12472-2003 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Surface roughness PArameters and their values for wooden pieces 产品几何量技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度参数及其数值 |
China National Standards PA |
English PDF |
GB/T 8804.3-2003 |
Thermoplastic pipes--Determination of tensile properties--PArt 3: Polyolefin pipes 热塑性塑料管材 拉伸性能测定 第3部分: 聚烯烃管材 |
China National Standards PA |
English PDF |
GB/T 8804.2-2003 |
Thermoplastic pipes--Determination of tensile properties--PArt 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI) 热塑性塑料管材 拉伸性能测定 第2部分: 硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲聚氯乙烯(PVC-HI)管材 |
China National Standards PA |
English PDF |
GB/T 8804.1-2003 |
Thermoplastic pipes--Determination of tensile properties--PArt 1: General test method 热塑性塑料管材 拉伸性能测定 第1部分:试验方法总则 |
China National Standards PA |
English PDF |
GB/T 18993.3-2003 |
Chlorinated poly(Vinyl chloride) piping systems for hot and cold water installations--PArt 3: Fittings 冷热水用氯化聚氯乙烯(PVC-C)管道系统 第3部分: 管件 |
China National Standards PA |
English PDF |
GB/T 18993.2-2003 |
Chlorinated poly(vinyl chloride) piping systems for hot and cold water installations--PArt 2: Pipes 冷热水用氯化聚氯乙烯(PVC-C)管道系统 第2部分: 管材 |
China National Standards PA |
English PDF |
GB/T 18993.1-2003 |
Chlorinated poly(vinyl chloride) piping system for hot and cold water installations--PArt 1: General 冷热水用氯化聚氯乙烯(PVC-C) 管道系统 第1部分:总则 |
China National Standards PA |
English PDF |
GB/T 18992.2-2003 |
Crosslinked polyethylene(PE-X) piping systems for hot and cold water installations--PArt 2: Pipes 冷热水用交联聚乙烯(PE-X)管道系统 第2部分:管材 |
China National Standards PA |
English PDF |
GB/T 18992.1-2003 |
Crosslinked polyethylene(PE-X) piping systems for hot and cold water installations--PArt 1: General 冷热水用交联聚乙烯(PE-X)管道系统 第1部分:总则 |
China National Standards PA |
English PDF |
GB/T 16886.5-2003 |
Biological evaluation ofmedical devices--PArt 5: Test for in vitro cytotoxicity 医疗器械生物学评价 第5部分: 体外细胞毒性试验 |
China National Standards PA |
English PDF |
GB/T 16886.4-2003 |
Biological evaluation of medical devices--PArt 4:Selection of tests for interactions with blood 医疗器械生物学评价 第4部分: 与血液相互作用试验选择 |
China National Standards PA |
English PDF |
GB/T 16886.15-2003 |
Biological evaluation of medical devices--PArt 15:Identification and quantification of degradation products from metals and alloys 医疗器械生物学评价 第15部分:金属与合金降解产物的定性与定量 |
China National Standards PA |
English PDF |
GB/T 16886.14-2003 |
Biological evaluation of medical devices--PArt 14:Identification and quantification of degradation products from ceramics 医疗器械生物学评价 第14部分:陶瓷降解产物的定性与定量 |
China National Standards PA |
English PDF |
GB 15322.6-2003 |
Combustible gas detectors--PArt 6: Portable detectors for combustible man-made gas 可燃气体探测器 第6部分: 测量人工煤气的便携式可燃气体探测器 |
China National Standards PA |
English PDF |
GB 15322.5-2003 |
Combustible gas detectors--PArt 5: Self-contained detectors for combustible man-made gas 可燃气体探测器 第5部分: 测量人工煤气的独立式可燃气体探测器 |
China National Standards PA |
English PDF |
GB 15322.4-2003 |
Combustible gas detectors--PArt 4: Point type detectors for combustible man-made gas 可燃气体探测器 第4部分: 测量人工煤气的点型可燃气体探测器 |
China National Standards PA |
English PDF |
GB 15322.3-2003 |
Combustible gas detectors--PArt 3: Portable detectors for 0~100%LEL combustible gas 可燃气体探测器 第3部分:测量范围为0~100%LEL的便携式可燃气体探测器 |
China National Standards PA |
English PDF |
GB 15322.2-2003 |
Combustible gas detectors--PArt 2: Self-contained detectors for 0~100%LEL combustible gas 可燃气体探测器 第2部分:测量范围为0~100%LEL的独立式可燃气体探测器 |
China National Standards PA |
English PDF |
Find out:18320Items | To Page of: First -Previous-Next -Last | [161] [162] [163] [164] [165] [166] [167] |