Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 30749-2014 |
The apPArent density determination of mineral medicine and calcined products 矿物药材及其煅制品视密度测定方法 |
China National Standards PA |
 English PDF |
| GB/T 30705-2014 |
Microbeam analysis―Electron probe microanalysis―Guidelines for the determination of experimental PArameters for wavelength dispersive spectroscopy 微束分析 电子探针显微分析 波谱法实验参数测定导则 |
China National Standards PA |
English PDF |
| GB/T 30599-2014 |
In situ PArticulate reinforced ZL101A alloy matrix composites 原位颗粒增强ZL101A合金基复合材料 |
China National Standards PA |
English PDF |
| GB/T 30598-2014 |
General specifications of epoxy asphalt materials for PAving roads and bridges 道路与桥梁铺装用环氧沥青材料通用技术条件 |
China National Standards PA |
English PDF |
| GB/T 30593-2014 |
External wall interior insulation composite PAnel system 外墙内保温复合板系统 |
China National Standards PA |
English PDF |
| GB/T 30592-2014 |
Test method for solar heat gain coefficient of transPArent envelope 透光围护结构太阳得热系数检测方法 |
China National Standards PA |
English PDF |
| GB/T 2992.2-2014 |
Dimensions of refractory bricks―PArt 2: Terminology for shapes and brickworks of refractory bricks 耐火砖形状尺寸 第2部分：耐火砖砖形及砌体术语 |
China National Standards PA |
English PDF |
| GB/T 2085.4-2014 |
Aluminum powder―PArt 4: Nitrogen atomized aluminum powder 铝粉 第4部分：氮气雾化铝粉 |
China National Standards PA |
English PDF |
| GB/T 18376.2-2014 |
Grades of cemented carbide―PArt 2: Grades of cemented carbide for geological and mining tools 硬质合金牌号 第2部分：地质、矿山工具用硬质合金牌号 |
China National Standards PA |
English PDF |
| GB/T 30764-2014 |
Drone puPAe 雄蜂蛹 |
China National Standards PA |
English PDF |
| GB/T 30731-2014 |
Specifications of combined equipment for coal sample prePAration 煤炭联合制样系统技术条件 |
China National Standards PA |
English PDF |
| GB/T 25206.1-2014 |
Reaction-to-fire tests for sandwich PAnel building systems―Part 1: Test method for small rooms 复合夹芯板建筑体燃烧性能试验 第1部分：小室法 |
China National Standards PA |
English PDF |
| GB/T 19485-2014 |
Technical guidelines for environmental imPAct assessment of marine engineering 海洋工程环境影响评价技术导则 |
China National Standards PA |
English PDF |
| GB/T 18916.9-2014 |
Norm of water intake―PArt 9: Monosodium L-glutamate production 取水定额 第9部分：味精制造 |
China National Standards PA |
English PDF |
| GB/T 18916.7-2014 |
Norm of water intake―PArt 7: Alcohol production 取水定额 第7部分：酒精制造 |
China National Standards PA |
English PDF |
| GB/T 18916.16-2014 |
Norm of water intake―PArt 16: Electrolytic aluminium production 取水定额 第16部分：电解铝生产 |
China National Standards PA |
English PDF |
| GB/T 18916.14-2014 |
Norm of water intake―PArt 14: Wool textile product 取水定额 第14部分：毛纺织产品 |
China National Standards PA |
English PDF |
| GB 50953-2014 |
Technical code for engineering of network interconnection and disPAtch system 网络互联调度系统工程技术规范 |
China National Standards PA |
English PDF |
| GB 18485-2014 |
Standard for pollution control on the municiPAl solid waste incineration 生活垃圾焚烧污染控制标准 |
China National Standards PA |
English PDF |
| GB 6675.4-2014 |
Safety of toys―PArt 4: Migration of certain elements 玩具安全 第4部分：特定元素的迁移 |
China National Standards PA |
English PDF |
| GB 6675.3-2014 |
Safety of toys—PArt 3: Flammability 玩具安全 第3部分：易燃性能 |
China National Standards PA |
English PDF |
| GB 6675.2-2014 |
Safety of toys―PArt 2: Mechanical and physical properties 玩具安全 第2部分：机械与物理性能 |
China National Standards PA |
English PDF |
| GB 6675.1-2014 |
Toys safety―PArt 1: Basic code 玩具安全 第1部分：基本规范 |
China National Standards PA |
English PDF |
| GB 5226.6-2014 |
Electrical safety of machinery―Electrical equipment of machines―PArt 6: Requirements for construction machinery 机械电气安全 机械电气设备 第6部分：建设机械技术条件 |
China National Standards PA |
English PDF |
| GB 16917.1-2014 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)—PArt 1: General rules 家用和类似用途的带过电流保护的剩余电流动作断路器(RCBO) 第1部分: 一般规则 |
China National Standards PA |
English PDF |
| GB 16916.1-2014 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB)―PArt 1: General rules 家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第1部分: 一般规则 |
China National Standards PA |
English PDF |
| GB/T 30580-2014 |
The technical guide for the life assessment of main pressure PArts of power plant boiler 电站锅炉主要承压部件寿命评估技术导则 |
China National Standards PA |
English PDF |
| GB/T 30573-2014 |
Fine blanked PArts―General technical requirements 精密冲裁件 通用技术条件 |
China National Standards PA |
English PDF |
| GB/T 30572-2014 |
Fine blanked PArts―Compiling rules of processes 精密冲裁件 工艺编制原则 |
China National Standards PA |
English PDF |
| GB/T 30571-2014 |
General specifications of sheet metal stamping PArts 金属冷冲压件 通用技术条件 |
China National Standards PA |
English PDF |
| GB/T 30570-2014 |
Structural main factors of sheet metal stamping PArts 金属冷冲压件 结构要素 |
China National Standards PA |
English PDF |
| GB/T 30559.1-2014 |
Energy performance of lifts, escalators and moving walks—PArt 1: Energy measurement and verification 电梯、自动扶梯和自动人行道的能量性能 第1部分：能量测量与验证 |
China National Standards PA |
English PDF |
| GB/T 26610.5-2014 |
Guideline for implementation of risk-based inspection of pressure equipment system―PArt 5: Quantitative analysis approach of failure consequence 承压设备系统基于风险的检验实施导则 第5部分：失效后果定量分析方法 |
China National Standards PA |
English PDF |
| GB/T 26610.4-2014 |
Guideline for implementation of risk-based inspection of pressure equipment system―PArt 4：Quantitative analysis approach of failure likelihood 承压设备系统基于风险的检验实施导则 第4部分：失效可能性定量分析方法 |
China National Standards PA |
English PDF |
| GB/T 26610.3-2014 |
Guideline for implementation of risk-based inspection of pressure equipment system―PArt 3: Qualitative approach to risk 承压设备系统基于风险的检验实施导则 第3部分：风险的定性分析方法 |
China National Standards PA |
English PDF |
| GB/T 26610.2-2014 |
Guideline for implementation of risk-based inspection of pressure equipment system―PArt 2：Risk-based inspection plan 承压设备系统基于风险的检验实施导则 第2部分：基于风险的检验策略 |
China National Standards PA |
English PDF |
| GB/T 18851.6-2014 |
Non-destructive testing―Penetrant testing―PArt 6: Penetrant testing at temperatures lower than 10℃ 无损检测 渗透检测 第6部分：温度低于10℃的渗透检测 |
China National Standards PA |
English PDF |
| GB/T 18851.5-2014 |
Non-destructive testing―Penetrant testing―PArt 5: Penetrant testing at temperatures higher than 50 ℃ 无损检测 渗透检测 第5部分：温度高于50℃的渗透检测 |
China National Standards PA |
English PDF |
| GB/T 14790.2-2014 |
Mechanical vibration―Measurement and evaluation of human exposure to hand-transmitted vibration―PArt 2: Practical guidance for measurement at the workplace 机械振动 人体暴露于手传振动的测量与评价 第2部分：工作场所测量实用指南 |
China National Standards PA |
English PDF |
| GB/T 30544.5-2014 |
Nanotechnologies―Vocabulary―PArt 5: Nano/bio interface 纳米科技 术语 第5部分：纳米/生物界面 |
China National Standards PA |
English PDF |
| GB/T 30544.1-2014 |
Nanotechnologies―Vocabulary―PArt 1: Core terms 纳米科技 术语 第1部分：核心术语 |
China National Standards PA |
English PDF |
| GB/T 23703.7-2014 |
Knowledge management―PArt 7：General requirements for knowledge classification 知识管理 第7部分：知识分类通用要求 |
China National Standards PA |
English PDF |
| GB/T 5171.1-2014 |
Small power motors―PArt 1: General technical requirements 小功率电动机 第1部分：通用技术条件 |
China National Standards PA |
English PDF |
| GB/T 30556.7-2014 |
Electromagnetic comPAtibility―Installation and mitigation guidelines―Degrees of protection provided by enclosures against electromagnetic disturbances (EM code) 电磁兼容 安装和减缓导则 外壳的电磁骚扰防护等级（EM编码） |
China National Standards PA |
English PDF |
| GB/T 30555-2014 |
Rules for screw exPAnder（unit）thermal acceptance test 螺杆膨胀机（组）性能验收试验规程 |
China National Standards PA |
English PDF |
| GB/T 30554-2014 |
Terminology of screw exPAnder 螺杆膨胀机 术语 |
China National Standards PA |
English PDF |
| GB/T 16927.4-2014 |
High voltage and high current test techniques―PArt 4: Definitions and requirements for test currents and measuring systems 高电压和大电流试验技术 第4部分：试验电流和测量系统的定义和要求 |
China National Standards PA |
English PDF |
| GB/T 11026.8-2014 |
Electrical insulating materials―Thermal endurance properties―PArt 8: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method 电气绝缘材料 耐热性 第8部分：用固定时限法确定绝缘材料的耐热指数（TI和RTE） |
China National Standards PA |
English PDF |
| GB/T 11026.7-2014 |
Electrical insulating materials―Thermal endurance properties―PArt 7: Determination of relative thermal endurance index (RTE) of insulating material 电气绝缘材料 耐热性 第7部分：确定绝缘材料的相对耐热指数(RTE) |
China National Standards PA |
English PDF |
| GB/T 21268-2014 |
General technical conditions for garden PAtrol minibus 非公路用旅游观光车通用技术条件 |
China National Standards PA |
English PDF |
| GB 30611-2014 |
National Food Safety Standard-Food Additives-IsoproPAnol 食品安全国家标准 食品添加剂 异丙醇 |
China National Standards PA |
English PDF |
| GB/T 15715-2014 |
Performance evaluation for coal gravity sePArating equipment 煤用重选设备工艺性能评定方法 |
China National Standards PA |
English PDF |
| GB/T 20003.1-2014 |
Special procedures for the development of standards—PArt 1：Standard related to patents 标准制定的特殊程序 第1部分：涉及专利的标准 |
China National Standards PA |
English PDF |
| GB/T 50980-2014 |
Code for design of power disPAtching and communication center 电力调度通信中心工程设计规范 |
China National Standards PA |
English PDF |
| GB 50254-2014 |
Code for construction and acceptance of low-voltage apPAratus Electric equipment installation engineering 电气装置安装工程低压电器施工及验收规范 |
China National Standards PA |
English PDF |
| GB 30509-2014 |
Identification for PAssenger cars and their parts 车辆及部件识别标记《第1号修改单》 |
China National Standards PA |
English PDF |
| GB/T 9109.3-2014 |
Dynamic measurement of petroleum and liquid petroleum products―PArt 3: Technical requirements of installation for pipe prover 石油和液体石油产品动态计量 第3部分：体积管安装技术要求 |
China National Standards PA |
English PDF |
| GB/T 9109.2-2014 |
Dynamic measurement of petroleum and liquid petroleum products―PArt 2: Technical requirements of meter installation 石油和液体石油产品动态计量 第2部分：流量计安装技术要求 |
China National Standards PA |
English PDF |
| GB/T 7631.9-2014 |
Lubricants,industrial oils and related products (class L)-Classification―PArt 9: Family D(Compressors) 润滑剂、工业用油和有关产品（L类）的分类 第9部分：D组(压缩机) |
China National Standards PA |
English PDF |
| GB/T 7631.17-2014 |
Lubricants,industrial oils and related products(class L)-Classification—PArt 17: Family E(Internal combustion engine oils) 润滑剂、工业用油和相关产品（L类）的分类 第17部分：E组(内燃机油) |
China National Standards PA |
English PDF |
| GB/T 7631.12-2014 |
Lubricants,industrial oils and related prouducts (class L)-Clasification―PArt 12: Family Q (Heat transfer fluids) 润滑剂、工业用油和有关产品（L类）的分类 第12部分：Q组（有机热载体） |
China National Standards PA |
English PDF |
| GB/T 7631.11-2014 |
Lubricants,industrial oils and related products (class L)Classification—PArt 11: Family G(Slideways) 润滑剂、工业用油和有关产品（L类）的分类 第11部分：G组(导轨) |
China National Standards PA |
English PDF |
| GB/T 4507-2014 |
Standard test method for softening point of bitumen―Ring-and-ball apPAratus 沥青软化点测定法 环球法 |
China National Standards PA |
English PDF |
| GB/T 30516-2014 |
Bitumen with high viscosity and elastic recovery for PAvement 高粘高弹道路沥青 |
China National Standards PA |
English PDF |
| GB/T 30515-2014 |
Petroleum products―TransPArent and opaque liquid―Determination of kinematic viscosity and calculation of dynamic viscosity 透明和不透明液体石油产品运动黏度测定法及动力黏度计算法 |
China National Standards PA |
English PDF |
| GB/T 30513-2014 |
Technical requirements and testing method of tire blow-out monitoring and controlling system for PAssenger car 乘用车爆胎监测及控制系统技术要求和试验方法 |
China National Standards PA |
English PDF |
| GB/T 30507-2014 |
Ships and marine technology―Lubricating and hydraulic oil systems―Guidance for sampling to determine cleanliness and PArticle contamination 船舶和海上技术 润滑油系统和液压油系统 颗粒污染物取样和清洁度判定导则 |
China National Standards PA |
English PDF |
| GB/T 30491.1-2014 |
Natural gas—Calculation of thermodynamic properties—PArt 1: Gas phase properties for transmission and distribution applications 天然气 热力学性质计算 第1部分：输配气中的气相性质 |
China National Standards PA |
English PDF |
| GB/T 11060.12-2014 |
Natural gas—Determination of sulfur compound—PArt 12： Determination of hydrogen sulfide content by laser absorption spectroscopy 天然气 含硫化合物的测定 第12部分：用激光吸收光谱法测定硫化氢含量 |
China National Standards PA |
English PDF |
| GB/T 11060.11-2014 |
Natural gas—Determination of sulfur compounds－PArt 11: Determination of hydrogen sulfide content by length-of-stain detector tubes method 天然气 含硫化合物的测定 第11部分：用着色长度检测管法测定硫化氢含量 |
China National Standards PA |
English PDF |
| GB/T 11060.10-2014 |
Natural gas―Determination of sulfur compounds―PArt 10: Determination of sulfur compounds using gas chromatography method 天然气 含硫化合物的测定 第10部分：用气相色谱法测定硫化合物 |
China National Standards PA |
English PDF |
| GB 50954-2014 |
Code for design of municiPAl solid waste co-processing in cement kiln 水泥窑协同处置垃圾工程设计规范 |
China National Standards PA |
English PDF |
| GB/T 50947-2014 |
Standard for assessment PArameters of sunlight on building 建筑日照计算参数标准 |
China National Standards PA |
English PDF |
| GB/T 10827.1-2014 |
Industrial trucks—Safety requirements and verification—PArt 1:Self-propelled industrial trucks, other than driverless trucks,variable-reach trucks and burden-carrier trucks 工业车辆 安全要求和验证 第1部分：自行式工业车辆（除无人驾驶车辆、伸缩臂式叉车和载运车） |
China National Standards PA |
English PDF |
| GB 9816.1-2013 |
Thermal-links—PArt 1: Requirements and application guide 热熔断体 第1部分：要求和应用导则 |
China National Standards PA |
English PDF |
| GB 7000.203-2013 |
Luminaires―PArt 2-3: Particular requirements-Luminaires for road and street lighting 灯具 第2-3部分：特殊要求 道路与街路照明灯具 |
China National Standards PA |
English PDF |
| GB 4706.109-2013 |
Household and similar electrical appliances—Safety—PArticular requirements for electrolysers 家用和类似用途电器的安全 电解槽的特殊要求 |
China National Standards PA |
English PDF |
| GB 19510.210-2013 |
Lamp controlgear―PArt 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) 灯的控制装置 第2-10部分：高频冷启动管形放电灯（霓虹灯）用电子换流器和变频器的特殊要求 |
China National Standards PA |
English PDF |
| GB 7251.12-2013 |
Low-voltage switchgear and controlgear assemblies—PArt 2: Power switchgear and controlgear assemblies 低压成套开关设备和控制设备 第2部分：成套电力开关和控制设备 |
China National Standards PA |
English PDF |
| GB 7251.1-2013 |
Low-voltage switchgear and controlgear assemblies―PArt 1: General rules 低压成套开关设备和控制设备 第1部分:总则 |
China National Standards PA |
English PDF |
| GB 30439.5-2013 |
Safety requirements for industrial automation products—PArt 5: Safety requirements for flowmeter 工业自动化产品安全要求 第5部分: 流量计的安全要求 |
China National Standards PA |
English PDF |
| GB 30439.4-2013 |
Safety requirements for industrial automation products—PArt 4: Safety requirements for control valve 工业自动化产品安全要求 第4部分: 控制阀的安全要求 |
China National Standards PA |
English PDF |
| GB 30439.3-2013 |
Safety requirements for industrial automation products―PArt 3: Safety requirements for temperature transmitter 工业自动化产品安全要求 第3部分: 温度变送器的安全要求 |
China National Standards PA |
English PDF |
| GB 30439.2-2013 |
Safety requirements for industrial automation products—PArt 2: Safety requirements for pressure （differential）transmitter 工业自动化产品安全要求 第2部分: 压力/差压变送器的安全要求 |
China National Standards PA |
English PDF |
| GB 30439.1-2013 |
Safety requirements for industrial automation products—PArt 1: General requirements 工业自动化产品安全要求 第1部分: 总则 |
China National Standards PA |
English PDF |
| GB 20888.2-2013 |
Machinery for forestry―Safety requirements and testing for pole-mounted powered pruners―PArt 2: Machines for use with back-pack power source 林业机械 杆式动力修枝锯安全要求和试验 第2部分：背负式动力修枝锯 |
China National Standards PA |
English PDF |
| GB 20888.1-2013 |
Machinery for forestry―Safety requirements and testing for pole-mounted powered pruners―PArt 1: Machines fitted with an integral combustion engine 林业机械 杆式动力修枝锯安全要求和试验 第1部分：侧挂式动力修枝锯 |
China National Standards PA |
English PDF |
| GB 19726.2-2013 |
Machinery for forestry —Portable chain-saw safety requirements and testing—PArt 2: Chain-saws for tree service 林业机械 便携式油锯安全要求和试验 第2部分：修枝油锯 |
China National Standards PA |
English PDF |
| GB 19726.1-2013 |
Machinery for forestry―Portable chain-saw safety requirements and testing―PArt 1: Chain-saws for forest service 林业机械 便携式油锯安全要求和试验 第1部分：林用油锯 |
China National Standards PA |
English PDF |
| GB/T 4516-2013 |
Household sewing machine—Determination of sewing caPAcity 家用缝纫机 缝厚能力测试方法 |
China National Standards PA |
English PDF |
| GB/T 30446.3-2013 |
Psychological counseling—PArt 3: Information management 心理咨询服务 第3部分：咨询信息管理 |
China National Standards PA |
English PDF |
| GB/T 30446.2-2013 |
Psychological counseling—PArt 2: Services procedures 心理咨询服务 第2部分：服务流程 |
China National Standards PA |
English PDF |
| GB/T 30420.1-2013 |
Sewing machine terminology—PArt 1: Basic terminology 缝纫机术语 第1部分：基础术语 |
China National Standards PA |
English PDF |
| GB/T 30416-2013 |
Technical specifications for clocks and watches after-sale rePAir service 钟表售后维修服务技术规范 |
China National Standards PA |
English PDF |
| GB/T 30237-2013 |
Ancient wall PAinting deterioration and legends 古代壁画病害与图示 |
China National Standards PA |
English PDF |
| GB/T 30236-2013 |
Specification for compilation of conservation and restoration plan of ancient wall PAinting 古代壁画保护修复方案编制规范 |
China National Standards PA |
English PDF |
| GB/T 30235-2013 |
Specification for archives of conservation and restoration of ancient wall PAinting 古代壁画保护修复档案规范 |
China National Standards PA |
English PDF |
| GB/T 21709.22-2013 |
Standardized manipulations of acupuncture and moxibustion―PArt 22: scraping therapy 针灸技术操作规范 第22部分：刮痧 |
China National Standards PA |
English PDF |
| GB/T 21709.21-2013 |
Standardized manipulations of acupuncture and moxibustion―PArt 21: Filiform needle manipulation by basic applying technique 针灸技术操作规范 第21部分：毫针基本手法 |
China National Standards PA |
English PDF |
| GB/T 21709.16-2013 |
Standardized manipulations of acupuncture and moxibustion―PArt 16: Abdominal acupuncture 针灸技术操作规范 第16部分：腹针 |
China National Standards PA |
English PDF |
| Find out:18320Items | To Page of: First -Previous-Next -Last | [78] [79] [80] [81] [82] [83] [84] |
+86-755-25831330
